Professional Documents
Culture Documents
Rambold - Katalog 2004 EN
Rambold - Katalog 2004 EN
Rambold - Katalog 2004 EN
Sheet No.
Precision gauges and accessories – Constructive features and dimensioned sketches .................................................... 1
Table of sizes and technical data for metric gauges ........................................................................................................... 2
Gauges with scale partition of 0,1 mm................................................................................................................................ 3
Standard and large-scale gauges with scale partition of 0,01 mm and of 0,005 mm.......................................................... 4
Shock-proof precision gauges of the new generation with scale partition of 0,01 mm........................................................ 5
Shock-proof safety gauges with free lift .............................................................................................................................. 6
Gauges with a scale partition of 0,01 mm and large-scale metering range ........................................................................ 7
Small gauges with scale partition of 0,01 mm..................................................................................................................... 8
Dial bench gauges and indicating callipers with a scale partition of 0,001 mm and of 0,002 mm...................................... 9
Scale partition for inched gauges........................................................................................................................................ 10
Digital gauges ..................................................................................................................................................................... 11
Accessories for gauges....................................................................................................................................................... 12
Standard gauge slides ........................................................................................................................................................ 13
Lever gauges according to DIN 2270.................................................................................................................................. 14
Accessories for lever gauges.............................................................................................................................................. 15
Depth metering gauges....................................................................................................................................................... 16
Thickness metering gauges ................................................................................................................................................ 17
Tyre engraving metering devices........................................................................................................................................ 18
Electrically operated gauges............................................................................................................................................... 19
Hardness testing gauge Shore A ........................................................................................................................................ 20
Metering stands and metering tables.................................................................................................................................. 21
Concentricity metering devices ........................................................................................................................................... 22
Meteor C – inexpensive standard-gauges of 0,01 mm scale partition ................................................................................ 23
Hand gauges for tensile force and for pressure force ......................................................................................................... 24
WB 32 – Measuring gauge for tooth angles and height difference ..................................................................................... 25
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Precision gauges and accessories Constructive features and dimensioned sketches
DIAL GAUGES INSTRUMENTS
RAMBOLD - Precision gauges have ■ The gauges and indicating calipers ■ The gauge slides can be exchan-
successfully fulfilled the high require- generally are inserted at the standar- ged at any time and can be replaced
ments of precision gauges for 50 years dized clamping shank with a diameter with special gauge slides with connec-
now. Excellent metering characteris- of 8h6. This clamping shank has been ting thread M 2,5.
tics, solid manufacturing and extraor- manufactured of stainless steel, is ■ Smooth running, easy to read and
dinary durability in appropriate use hardened and microfinished. virtually constant measuring pressure
distinguish the metering instruments ■ The location hole measures 8H7 in guarantee rational and accurate mete-
described in this catalogue. diameter. On request the gauges can ring at any time.
be equipped with a rear chucking bolt. This catalogue can only give an over-
Metering instruments and indicating ■ The gauges and metering instru- view of our versatile wide range of
calipers are linear indicating measu- ments either are tested according to manufacturing. Please feel free to ask
ring instruments which use a mecha- the respective DIN standard applicable for your specific kind of gauges and
nical system to transmit the spindle or according to strict in-house stan- metering instruments. We will find a
path to a pointer. The pointer move- dards and offer an utmost of accuracy solution for your metering requir
ment can be read from a regularly and security. ments. We offer custom models as
partitioned stroke scale. well as repair service. Constructive
■ The spindle has been manufactured
of stainless steel, is grinded and adjustments and design modifications
Lever gauges are equipped with due to technical developments are
angle-movable gauge slides. The microfinished.
reserved. Offers are subject to our
gauge slide excursion also is transmit- ■ In the initial position the pointers General Terms of Delivery.
ted via a mechanical system to a poin- are set to zero. So the metering device
ter which moves in front of a regularly will be under normal engagement
partitioned stroke scale. conditions in the zero position and
metering can directly be carried out.
The following constructive features ■ The tolerance marks are for accu-
are to be especially emphasized: rate setting of the desired dimensions.
■ All gauges are equipped with an If requested the gauges can also be
extraordinary solid metal metering delivered without tolerance marks.
housing for the smooth running Standard splash-proof gauges are not
metering device. equipped with tolerance marks.
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 1
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Dimensioned sketches for gauges and indicating calipers
Housing
Tolerance marks to be set
mm-display
Pointer
Stroke scale
Clamping
Measuring Bolts
Measuring use
Table of sizes and technical data for metric gauges
DIAL GAUGES INSTRUMENTS
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 2
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Table of sizes and technical data for metric gauges
Type Ud. Sheet Sketch Value of Dimensions in mm
Metering
scale
No. No. No. range
partition
mm mm A B C D E F G H
M04/9 ST 45 6 ±0,45 58 113,5 8,2 54,0 23,5 9,0 22,5 12,0
M02/3 STW 46 6 ±0,2 45 96,0 8,7 38,5 21,2 7,0 14,5 3,5
M04/3 STW 47 6 ±0,4 45 96,0 8,7 21,2 14,5 3,5
M02/49 STW 48 6 ±0,24 60 132,0 10,5 26,5 20,0 11,0
M04/9 STW 49 6 ±0,45 60 113,5 10,5 26,5 20,0 11,0
M2/30 50 7 30 58 138,5 8,2 23,5 22,5 32,5
M2/30 ST 51 7 30 58 138,5 8,2 23,5 22,5 32,5
M2/30/80 52 7 30 80 147,5 10,0 54,0 26,2 31,5 32,0
M2/30/80 ST 53 7 30 80 147,5 10,0 26,2 31,5 32,0
M2/30/100 54 7 30 100 155,5 10,8 27,0 9,0 39,5 32,5
M2/50 55 7 50 58 179,0 8,2 23,8 20,0 51,5
M2/50 ST 56 7 50 58 179,0 8,2 23,8 20,0 51,5
M2/50/80 57 7 50 80 147,5 10,0 59,0 26,2 31,5 52,0
M2/50/80 ST 58 7 50 80 147,5 10,0 26,2 31,5 52,0
M2/50/100 59 7 50 100 197,0 10,8 27,0 36,8 50,5
M2/80 60 7 80 58 312,0 10,0 59,0 26,2 55,0 85,0
M2/100 *) 61 7 100 58 382,0 8,2 59,0 25,5 8,5 70,5 106,0
M2/30 W 62 7 30 60 175,0 10,5 54,0 26,2 16,5 32,5
M2/30 STW 63 7 30 60 175,0 10,5 54,0 26,2 9,0 16,5 32,5
M2/50 W 64 7 0,01 50 60 236,0 10,5 59,0 26,2 18,5 50,5
M2/50 STW 65 7 50 60 236,0 10,5 59,0 26,2 18,5 50,5
MU 28 66 8 3 28 54,0 5,3 22,0 17,3 5,5 13,0 5,5
MU 32 67 8 3 32 66,0 6,3 30,0 18,8 6,5 15,0 5,0
M4 68 8 3,5 40 72,0 7,6 38,5 20,0 14,5 4,0
M4/1 69 8 3,5 40 72,0 7,6 38,5 20,0 14,5 4,0
M4ST 70 8 3,5 40 72,0 7,6 38,5 20,0 14,5 4,0
M4/5 71 8 5 40 73,5 7,6 38,5 20,0 7,0 14,5 6,0
METEOR P40 72 8 5 40 78,0 6,8 37,0 20,5 16,0 7,5
M4/5 ST 73 8 5 40 73,5 7,6 38,5 20,0 14,5 6,0
M4/5/1 74 8 5 40 73,5 7,6 38,5 20,0 14,5 6,0
M4/5 RA 75 8 5 40 66,0 6,8 37,0 19,7 16,5 8,0
M4/6 RAEX 76 8 6 40 54,5 7,0 36,0 25,0 9,5 6,5
MU 28 W 78 8 3 28 68,5 5,3 22,0 17,3 5,6 8,9 3,5
M4W 79 8 3,5 45 95,0 8,6 38,5 21,0 15,0 3,5
M4 STW 80 8 3,5 45 95,0 8,6 38,5 21,0 7,0 15,0 3,5
M4/5 W 81 8 5 45 96,5 8,6 38,5 21,0 15,0 5,5
M4/5 STW 82 8 5 45 96,5 8,6 38,5 21,0 15,0 5,5
FM4/05 83 9 1 40 80,0 6,8 37,0 20,5 15,5 8,0
FM4/05 ST 84 9 0,002 1 40 80,0 6,8 37,0 20,5 15,5 8,0
FM10/05 85 9 1 58 112,0 7,8 52,0 22,5 7,5 22,0 14,0
FM4/10 86 9 1 40 80,0 6,8 37,0 21,6 15,5 8,0
FM4/10 ST 89 9 1 40 80,0 6,8 37,0 21,6 15,5 8,0
HFM4/10 ST 90 9 1 40 77,0 6,8 37,0 21,6 15,5 8,0
FM10/1 ST 91 9 1 58 93,0 8,7 54,0 23,5 32,0 1,5
FM10/2 92 9 0,001 2 58 105,0 8,7 54,0 23,5 22,5 12,0
FM10/2/80 93 9 2 80 114,5 10,2 54,0 26,2 31,5 12,5
FM10/5 94 9 5 58 105,0 8,7 54,0 23,5 9,0 22,5 11,5
FM10/2 W 95 9 2 60 132,0 10,2 54,0 26,2 20,0 11,0
HFM10/1 ST 96 9 1 58 111,5 8,0 52,0 25,0 22,0 15,0
FM01/2 ST 97 9 ±0,09 58 105,0 8,7 54,0 23,5 22,5 9,5
FZ05/2 98 9 0,002 0,2 62 108,0 53,0 18,0 33,0
FZ10/1 99 9 0,001 0,1 62 108,0 53,0 18,0 33,0
*) Clamping shank diameter Ø 10h6
Technical modifications due to development reserved.
Gauges with scale partition of 0, 1 mm
DIAL GAUGES INSTRUMENTS
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 3
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Gauges with scale partition of 0,1 mm
Type No. Metering range Glass ring diameter Number of pointers Metering range per Stroke scale
pointer rotation partition
M5 1 5 40 1 5 0-5
M5/10 2 10 40 1 10
M10 a 3 10 58 1 10
M1 0/80 a 4 10 80 1 10
M10/100 a 5 10 100 1 10
M10 b 6 20 58 2 10
M1 0/80 b 7 20 80 2 10
M10/100 b 8 20 100 2 10 0-10
M10 c 9 30 58 2 10
M1 0/80 c 10 30 80 2 10
M10/100 c 11 30 100 2 10
M10 d 12 50 58 2 10
M1 0/80 d 13 50 80 2 10
M10/100 d 14 50 100 2 10
M20 15 20 58 1 20 0-20
All dimensions in
Dimensions according to table of sizes
mm
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 4
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Standard- and large-scale gauges with
scale partition of 0,01 mm and of 0,005 mm
scale partition 0,01 mm
Glass ring
Type No. Metering Number of Metering range per Stroke scale Shock-proof
diameter
range Pointers pointer rotation partition
M1 16 58 1
M1 STO 17 58 1
M2 18 58 2
METEOR P 19 58 2
M2 STO 20 58 2
M2K 21 58 2
M2 STK 22 10 58 2 1 0-100
M6 23 80 2
M6 K 24 80 2
M6ST 25 80 2
M7 26 100 2
M7K 27 100 2
M8 28 112 2
M9 29 120 2
M3 30 5 58 2 0,5 0-50
Splash-proof model, with non-rotable glass ring, without tolerance marks
M1 STOW 31 10 60 1 1 0-100
M2W 32 10 60 2 1
With rear drive ( EX = excentric arrangement of the feeler bar)
M2/5 RA 33 5 58 2 1 0-100
M2 RAEX 34 6 58 2 1
Scale partition 0,005 mm
M3/1 35 5 58 2 0,5 0-50
All dimensions in mm Dimensions according to the table of sizes
In the case of the shock-proof models the metering gearing is protected against damages caused by
shocks of the feeling bar to guarantee the accuracy in metering.
The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing
against oil and splash-water.
If required the gauges optionally can be equipped at a surplus price with tolerance marks.
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 5
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Shock-proof precision gauges of the new generation
Type No. Metering Glass ring Number of Metering range Stroke scale Metering pressure Shock-
range diameter pointers per partition cN proof
Pointer rotation
M2 ST 36 10 58 80
M2 ST-MD 40 37 10 58 2 1 0-100 40
M2 ST-MD 20 38 10 58 20 **)
Splash-proof model with fixed glass ring, without tolerance marks
M2 STW 39 10 60 2 1 0-100 80
Options:
- Metering pressure exceeding 80 cN
- Metering pressure 18 cN, with ball bearing travelled spindle – model with only one pointer
- Metal glass ring
- Bocked pointer fine adjustment
- Special clock faces, custom imprint
- Rear chucking bolt E
- Setting of maximum pointer
- Magnetic rear
In case of the shock-proof models the metering gearing is protected against damages caused by shocks to the spindle to guarantee the
accuracy in metering.
The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally
equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment
provides a very effective sealing against oil and splash-water. If required the gauges optionally can be equipped price with tolerance marks
(to be charged). Almost all types can also be delivered in inch dimensions.
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 6
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Shock-proof safety gauges with free lift
Metering Glass ring Number of Stroke scale
Type No. Scale partition Free lift Shock-proof
range diameter pointers partition
M02/3 ST 42 0,01 ±0,2 40 1 4,5 20-0-20
M04/3 ST 43 0,01 ±0,4 40 1 4,5 40-0-40
M08/9 ST 40 0,02 ±0,8 58 1 9 80-0-80
M02/49 ST 44 0,01 ±0,24 58 1 3 24-0-24
M04/9 ST 45 0,01 ±0,45 58 1 9 45-0-45
FM01/2 ST 97 0,001 ±0,09 58 1 2,5 90-0-90
Splash-proof model with fixed glass ring, without tolerance marks
M02/3 STW 46 0,01 ±0,2 45 1 4,5 20-0-20
M04/3 STW 47 0,01 ±0,4 45 1 4,5 40-0-40
M08/9 STW 41 0,02 ±0,8 60 1 9 80-0-80
M02/49 STW 48 0,01 ±0,24 60 1 3 24-0-24
M04/9 STW 49 0,01 ±0,45 60 1 9 45-0-45
In case of the shock-proof models the the metering gearing is protected against damages caused by shocks of the feeling bar to
guarantee the accuracy in metering.
The metering range is limited to less than a complete pointer rotation in order to avoid erronneous readings.
This guarantees SAFETY in all metering proceedings.
Because of the extended free lift inserting of samples can be handled very easily.
The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and
splash-water.
If required the gauges optionally can be equipped at a surplus price price with tolerance marks.
Figure
minimized
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 7
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Gauges with scale partition of 0,01 mm
and large-scale metering range
Metering Number of Metering range per Stroke scale
Type No. Glass ring diameter Shock-proof
range pointers pointer rotation partition
M2/30 50 30 58
M2/30 ST 51 30 58
M2/30/80 52 30 80
M2/30/80 ST 53 30 80
M2/30/100 54 30 100
M2/50 55 50 58
M2/50 ST 56 50 58 2 1 0-100
M2/50/80 57 50 80
M2/50/80 ST 58 50 80
M2/50/100 59 50 100
M2/80 60 80 58
M2/100 ✹) 61 100 58
Splash-proof model with fixed glass ring, without tolerance marks
M2/30 W 62 30 60
M2/30 STW 63 30 60 2 1 0-100
M2/50 W 64 50 60
M2/50 STW 65 50 60
In case of the shock-proof models the metering gearing is protected against damages caused by shocks of the feeling bar to guarantee
the accuracy in metering.
The splash-proof gauges are equipped with a stripping device preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and
splash-water.
If required the gauges optionally can be equipped at a surplus price with tolerance marks.
Almost all types can also be supplied in inch dimensions.
Custom-made models are manufactured according to drawings and requirements.
Small gauges with scale partition of 0,01 mm
DIAL GAUGES INSTRUMENTS
By their compact construction these ➤ Stroke scale rotable, tolerance marks to be set
small gauges are especially suited for ➤ Gauge slide M 2,5 exchangeable
metering in limited spaces and for
➤ On request: Without tolerance marks, rear chuckbolt
integration into measuring devices,
tools and machines. ➤ Clamping shank madeof stainless steel, hardened and precision-finished
➤ Spindle made of stainless steel, microfinished
➤ German precision
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 8
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Small gauges with scale partition of 0,01 mm
Metering Glass ring Number of Metering range per Stroke scale
Type No Shock-proof
range diameter pointers pointer rotation partition
MU28 66 3 28
MU32 67 3 32 0,5 0-50
M4 68 3,5 40
M4/1 69 3,5 40 1 0-100
M4 ST 70 3,5 40 2
M4/5 71 5 40 0,5 0-50
METEOR P40 72 5 40
M4/5 ST 73 5 40
M4/5/1 74 5 40 1 0-100
With rear drive (EX = eccentric arrangement of the feeling bar)
M4/5 RA 75 5 40 2 0,5 0-50
M4/6 RAEX 76 6 40 2 1 0-100
Splash-proof model, with fixed glass ring, without tolerance marks
MU28 W 78 3 28
M4W 79 3,5 45
M4 STW 80 3,5 45 2 0,5 0-50
M4/5 W 81 5 45
M4/5 STW 82 5 45
METEOR P40 : Gauge model at a favourable price but nevertheless an accurately working model
In case of the shock-proof models the metering gearing is protected against damages caused by shocks of the spindle to guarantee the
high accuracy in metering.
The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and
splash-water.
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 9
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Dial bench gauges and indicating calipers with scale
partition of 0,001 mm and 0,002 mm
Metering Glassring Number of Metering range per Stroke scale
Type No. Shock-proof
range diameter pointers pointer rotation partition
Dial bench gauges with scale partition of 0,002 mm
FM4/05 83 1 40 0-100-0
FM4/05 ST 84 1 40 2 0,2 0-100-0
FM10/05 85 2 58 0-100
Dial bench gauges with scale partition of 0,001 mm
FM4/10 86 1 40 0,2 0-100-0
FM4/10 ST 89 1 40 0,2 0-100-0
HFM4/10 ST 90 1 40 0,1 0-100
FM10/1 ST 91 1 58 0,2 0-100-0
FM10/2 92 2 58 2 0,2 0-100-0
FM10/2/80 93 2 80 0,2 0-100-0
FM10/5 94 5 58 0,2 0-100-0
FM10/2 W 95 2 60 0,2 0-100-0
HFM10/1 ST 96 1 58 0,1 0-100
FM01/2 ST 97 ±0,09 58 1 90-0-90
Fine pointer 0,002 mm scale partition DIN 879
FZ05/2 98 0,2 1 25-0-25
Indicating calipers with scale partition of 0,001 mm according to DIN 879
FZ10/1 99 0,1 1 50-0-50
All dimensions in mm Dimensions according to table of sizes
ST : Shock-proof Clamping shank- Ø 8h6
W : Splash-proof model with fixed glass ring, without tolerance marks
In the case of the shock-proof models the metering gearing is protected against damages caused by shocks of the spindle to guarantee the
accuracy in metering.
The splash-proof dial bench gauges are equipped with a bellow preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and
splash-water.
FM : Dial bench gauges of the series FM work with a toothed gearing which guarantees high accuracy and high durability.
In spite of the high resolution metering ranges up to 5 mm can be offered.
HFM : Dial bench gauges of he series HFM are manufactures with a metering device operating with lever transmission. This increases again
the accuracy compares to traditional dial bench gauges, so that is was possible to nearly cut in half the deviation range fe and the
range of metering value reversal fu.
FZ : Indicating calipers metering according to DIN 879 show an utmost of accuracy with limited metering range and correspond to the high
DIN requirements.
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 10
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Inch-Dial Gauges
Typ Skale Metering Glasring Number of Metering range per Stroke scale Remarks
partition range diameter Pointers Pointer rotation partition
inch inch inch inch
Z4 .001 .140 1.575 2 .020 0-20 ST, W
Z4/5 .001 .200 1.575 2 .020 0-20 ST, W
Z1 .001 .400 2.283 1 .040 0-40 ST, W
Z2 .001 .400 2.283 2 .040 0-40 ST, W
Z6 .001 .400 3.150 2 .040 0-40 ST, W
Z1/1 .001 .400 2.283 1 .100 0-100 ST, W, F
Z2/1 .001 .400 2.283 2 .100 0-100 ST, W, F
METEOR PZ .001 .400 2.283 2 .100 0-100
Z1/2 .001 .400 2.283 1 .050 0-50 W
Z2/2 .0005 .400 2.283 2 .050 0-100 W
Z2/30 .001 1.200 2.283 2 .040 0-40
Z2/30-80 .001 1.200 3.150 2 .040 0-40
Z2/50 .001 2.000 2.283 2 .040 0-40
Z2/50-80 .001 2.000 3.150 2 .040 0-40
Z2/1/30 .001 1.200 2.283 2 .100 0-100
Z2/1/30-80 .001 1.200 3.150 2 .100 0-100
Z2/1/50 .001 2.000 2.283 2 .100 0-100
Z2/1/50-80 .001 2.000 3.150 2 .100 0-100
The comments marked accordingly under measuring gauges are also available
in the following versions are available at extra price:
F : Fine adjustmen t (only in combination with shock -proof).
ST : shock-proof
The metering gearing is protected against damages caused by shocks of the feeling bar to guarantee
the accuracy in metering.
W : Splash-proof
The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing.
These gauges are additionally equipped with an upper protecting cap and a rear sealing.
Together with the special non -rotable glass ring without tolerance marks this equipment provides a very effective sealing
against oil and splash -water.
If required the gauges optionally can be equipped at a surplus price with tolerance marks.
All Inch-Gauges are delivered with standard Schaft - Ø .315" (8 mm) and button thread M2,5.
Digital gauges
➤ Digital gauges with data port at favourable prices ➤ Favourable construction dimensions allow use
➤ Solid metering instruments, easy to operate even in limited spaces
➤ Equipped with all important features and functions ➤ Off-line power supply at extraordinary low energy
➤ Capacitive metering system consumption
➤ Error-free reading of metering values ➤ Stainless clamping shank, hardened and grounded
➤ Gauge slides exchangeable, thread M 2,5
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 11
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Digital gauges
DG 100 DG 1000 DG 1000/25
Value of figure steps 0,01 mm 0,001 mm / .00005“ 0,001 mm / .00005“
Metering range 12,5 mm 25 mm / 1/2“ 25 mm / 1“
Indication LCD digital
Figure height 6 mm 6 mm 8,5 mm
Traversing speed 1,5 m/sec
Operating temperature +5°C bis +40°C
Battery lithium 3V
Battery life apprx. 4.000 h
Data port opto RS 232
Clamping shank 8h6
Feeling bar hardened stainless steel
Gauge slide M 2,5
Functions setting to sero setting to zero setting to zero
change-over mm/inch change-over mm/inch change-over mm/inch
hold hold hold
change-over of the counting device
data transmission data transmission data transmission
REF I, REF II REF I, REF II REF I, REF II
PRESET
Accuracy 15μ 8μ 5μ
Repeatability 3μ (±2s) 2μ (±2s) 2μ (±2s)
Options
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 12
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Accessories for gauges
D : Wire ventilation
E : Rear chuck bolt
G : Glass ring fixing device ( for diameters of 40 and 58 mm)
H : Ventilation lever
M : Magnetic rear (equipped with permanent magnent with high adhesive force)
SZ : Maximum indicatoring device (for diameters of 58 and 80 mm)
Flat metal rear
Reversed spring tension
Feeling bar brake
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 13
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Standard gauge slides M 2,5 Ø 4 mm
Lever gauges DIN 2270
DIAL GAUGES INSTRUMENTS
➤ These length measurement devices with ➤ Parallism, measuring of shape and position deviation
angle-movable gauge slide transmit the excursion like concentricity or surface eveness can easily and
of this gauge slide via a mechanical system to the quickly be carried out, thus in a cost effective way
pointer ➤ The gauges are handy to use and can also be
➤ These gauges are used e.g. in tool manufacturing, applied in limited spaces
in workshops and in checking applications
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 14
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Lever gauges according to DIN 2270
Type Scale Metering Glass ring Stroke scale Length of the
partition range diameter partition feeler
DIN 2270 Form A
1-32 A 0,01 0,8 32 0-40-0 12
1-40 A 0,01 0,8 40 0-40-0 12
1-32 AL 0,01 0,5 32 0-25-0 35
1-40 AL 0,01 0,5 40 0-25-0 35
4-32 A 0,002 0,2 32 0-100-0 12
4-40 A 0,002 0,2 40 0-1k00-0 12
DIN 2270 Form B
2-32 B 0,01 0,8 32 0-40-0 12
2-40 B 0,01 0,8 40 0-40-0 12
2-32 BL 0,01 0,5 32 0-25-0 35
2-40 BL 0,01 0,5 40 0-25-0 35
5-32 B 0,002 0,2 32 0-100-0 12
5-40 B 0,002 0,2 40 0-100-0 12
DIN 2270 Form C
3-32 C 0,01 0,8 32 0-40-0 12
3-40 C 0,01 0,8 40 0-40-0 12
3-32 CL 0,01 0,5 32 0-25-0 35
3-40 CL 0,01 0,5 40 0-25-0 35
6-32 C 0,002 0,2 32 0-100-0 12
6-40 C 0,002 0,2 40 0-100-0 12
All dimensions in mm Dimensions according to table of sizes
These devices distinguish themselves by a high sensitiveness and accuracy together with solid construction and indifference to shocks.
Automatic switching over of the metering direction. Error-free reading because the rotation direction always is the same for all forms.
The housings are equipped with 3 milled dovetail guidances for inserting the clamping shank.
Standard accessory : 1 gauge slide with hard alloy ball Ø 2 mm, 1 key for replacing the gauge slide
1 clamping shank Ø 8h6, case
Accessories for lever gauges
DIAL GAUGES INSTRUMENTS
Clamping shank - Ø
SZ 4
4
All dimensions in mm
SZ 8
8
FHME 2 2 X -
FHME 3 3 X -
FHME 2-R 2 - X
FHME 2-L 2 X -
FHME 1-L 1 X -
FHME 3-L 3 X -
FHME 2-LR 2 - X
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 15
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Sketches for lever gauges
Form Dimension All dimensions in mm
A, B, C D 32,0 40,0
A, B, C E 5,6 6,0
A, B, C L 12 oder 35
A G 7,1 7,5
B H 69,5 73,5
B G 7,7 8,1
C G 7,5 7,9
➤ These devices are used for metering depths, e.g. ➤ High durability by rugged construction and solid
hole depths or groove depths as well as for testing manufacturing
surfaces ➤ The metering bridges are hardened,
➤ The metering depth can be extended as far as gunmetal-finished and fine lobated
needed with a toothed rack extension in steps ➤ On request mat chromium plated metering bridges
of 10 mm can be supplied at a surplus price
➤ Convenient pointer home position bys the rotably ➤ The gauge slide M 2,5 can be replaced by any other
knurled glass ring resp. the button for setting to form depending on the application
zero
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 16
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Depth metering gauges
Depth metering bridges without gauge
Type Length L Width Model
TM48 50 16 B
TM48 50 16 MC
TM48 80 16 B
TM48 80 16 MC
TM48 100 16 B
TM48 100 16 MC
TM48 150 20 B
Depth metering devices with gauge
Type Length L Model Scale partition Figure step Metering range
M2 - TM80 80 B 0,01 10
M2/30 - TM80 80 B 0,01 30
DG100 -TM80 80 B 0,01 12,5
DG1000 -TM80 80 B 0,001 12,5
All dimensions in mm
➤ These thickness gauging devices are especially ➤ Convenient pointer home position bys the rotably
suited for quick and reliable metering of the most knurled glass ring
various materials like cardboard, paper, felt, rubber, ➤ High durability by rugged construction and solid
leather, glass, film, plastics or plywood manufacturing
➤ These thickness gauging devices can be universally ➤ In finding solutions for your metering applications
applied because they are supplied as handy, small you are supported by a wide range of standard
models which can be used manually but also devices
stationarily
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 17
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Depth metering gauges
Type Scale Metering range Metering range of the Shackle depth Feeler forms
partition with gauge shackle
mm mm without gauge mm
mm Standard On request
Without gauge, insert 8H7
SM 12 5 15 30
SM 15 10 10 30
SM 18 10 20 60
SM 20 10 20 70
SM 50-35 10 45 35
SM 50-70 10 45 70
FB 150 10 20 150
FB 200 10 20 200
FB 300 10 30 300
FB 400 10 30 400
With mounted gauge
DMG10 0,1 10 15 W X,Y,Z
DMG 10/2 0,1 20 15 W X,Y,Z
DMG 11 0,1 10 50 A B,C,D,E
DMG 11 H
With ventilating 0,1 10 50 A B,C,D,E
lever
DMG 11/ 20 0,1 20 50 A B,C,D,E
DMG 11/ 30 0,1 30 50 A B,C,D,E
DMG 11/ 50 0,1 50 50 A B,C,D,E
DMG 11/100 0,1 30 100 A B,C,D, E
DMG 11/200 0,1 30 200 A B,C,D, E
DMG 11/300 0,1 30 300 A B,C,D, E
DMG 11/400 0,1 30 400 A B,C,D, E
DMG 20 0,01 8 12 W Z
DMG 21 0,01 10 18 W X,Y,Z
DMG 22 0,01 10 45 W X,Y,Z
DMG 23 0,01 10 50 A B,C,D,E
DMG 23 H
With ventilating 0,01 10 50 A B,C,D,E
lever
DMG 24 0,01 5 50 Rollers with lateral plates
DMG 24 OS 0,01 5 50 Rollers without lateral plates
DMG 25 0,01 10 100 A B,C,D,E
DMG 26 0,01 10 200 A B,C,D,E
DMG 27 0,01 30 200 A B,C,D,E
DMG 28 0,01 10 400 A B,C,D,E
On request the thickness metering gauges SM and FB can be equipped with suitables gauges.
When ordering please indicate the feeler form desired as otherwise the device will be supplied with the standard feelers.
According to the German StVZO pneumatic tyres of motor vehicles and trailers
must show over the entire extend of the entire width tread groves or indents
with a depth of at least 1,6 mm.
➤ The tyre checker for testing the tyre tread grooves of passenger cars and trucks
➤ Easy to handle
➤ Direct result reading
➤ Safety for you and your car
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 18
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Tyre engraving metering devices
Scale partition
Type Metering range Glass ring diameter
(reading possibility)
RT 10 0,1 10 58
RT 25 0,1 25 58
RT 30 0,1 30 58
All dimensions in mm
Electric operated gauges
DIAL GAUGES INSTRUMENTS
➤ Extraordinary solid housing as protection for the ➤ Spindle made of stainless steel superfinished
smooth running metering device ➤ The rotable stroke scale allows for setting to zero at
➤ Connecting dimensions according to DIN 878 any pointer position
➤ Electric limit contacts can be set covering the entire ➤ Gauge slide M 2,5 exchangeable
metering range ➤ On request: Rear chucking bolt
➤ Control port
➤ Shank made of stainless steel, hardened and
superfinished
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 19
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Elektronic operated gauges
Metering range per Stroke scale
Type Metering range Glass ring diameter Number of pointers
pointer rotation partition
Scale partition 0,1 mm
M10 el 10 58 1 10 0-10
M10/80 el 10 80 1 10 0-10
Scale partition 0,01 mm
M2 el 10 58
M2 el W 10 60
M2 el K 10 58
M6 el 10 80 2 1 0-100
M6 el W 10 80
M6 el K 10 80
M7 el ST 10 100
Scale partition 0,001 mm
M2/10 el 2 58
M2/10/80 el 2 80 2 1 0-100-0
M2/10/5 el 5 58
The adjustable contact path corresponds to the respective metering range of the gauge.
Options:
- angeflanschte signal indicator „S“
- floating relay contact for el-gauges (1 Wechsler)
Dimensioned
sketch
Hardness testing gauge Shore A
DIAL GAUGES INSTRUMENTS
➤ Pocket size precision hardness testing gauge ➤ Handy but stable construction by taking over the
MUS 221 for determining the Shore-A-Hardness modules of the most proven RAMBOLD-precision
DIN 53505 gauges
➤ For testing samples and manufactured articels made ➤ Direct reading of the shore hardness on the stroke
of soft rubber, caoutchouc, soft plastics and similar scale
plastics ➤ Supply with case and checking bridge
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 20
www.rambold-messgeraete.de • info@rambold-messgeraete.de
The RAMBOLD – hardness testing gauge MUS 221 is a handy, pocket-size precision gauge for determining the
Shore A – hardness according to DIN 53 505. It is used for testing of samples and manufactured articels made of soft rubber, caoutchouc, soft
plastics and similar plastics.
The nickel-plated, solid yellow brass housing with an outside diameter of 58 mm was taken over from the well-known and well-proven
RAMBOLD – precision gauges.
The penetrating stamp has been realized in form of a truncated cone.
In an unloaded condition the penetrating stamp stands out by 2,50 mm from the supporting surface of the hardness testing gauge.
Via a ball-bearing shaft it is connected to a metering spring. When placing the gauge onto the sample to be tested the penetrating stamp will
be pushed until the resistance force of the sample to be tested has been balanced with the reacting force.
The path gone by the penetrating stamp is proportional to the Shore hardness and is transmitted
via a metering gauge with pointer to a centesimal round stroke scale which
directly shows the Shore hardness.
During the testing procedure the hardness gauge is pressed in a vibrationless way with the prescribed pressing force of 12,5 N against
the sample to be tested until the supporting surface closely fits.
Three seconds after the supporting surface has touched the sample to be tested the hardness can be read from the gauge.
In the case of samples with distinct flow properties the hardness can also be read after a longer pressing time.
Shore Path of the Spring resistance F
hardness penetrating stamp mN
Shore A ± 40
0 2,5 ± 0,02 550
10 1300
20 2050
30 2805
40 3555
linear
50 4305
characteristic curve
60 5060
70 5810
80 6560
90 7310
100 0 8065
a Ø(3,00±0,10) mm
b Ø(1,25±0,15) mm
c (2,5±0,02) mm
d (0,79±0,01) mm
r (0,10±0,01) mm
f Ø(18,0±0,50) mm
Metering stands and metering tables
DIAL GAUGES INSTRUMENTS
➤ The metering stands and metering tables have been developped for universal
use in workshop and checking applications
➤ High durability by rugged construction and solid manufacturing
➤ Can be assembled with any gauge of the comprehensive RAMBOLD range of
metering gauges
➤ A wide-range of serial devices helps you to find a solution for your metering
application
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 21
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Metering stands and metering tables
Metering stands
Characteristics MST 1 MST 2 MST 3 MST 5 MST 6 MST 7 MST 8 IFH WMG
Hight of the stand column
with base plate 140 200 280
mm
Overall height mm 60 310 230 360
Ø Stand column mm 8 12 12 16 22
Ø Lateral arm mm 8 12 10 16 16
Range mm 100 150 260 150 180 150 50
Dimension base plate Fuß
Ø 46 Ø 40 Ø 55 65X48 65X48 50X70 60X250
mm
Adhesive force apprx. N 130 60 120 800 800 250
Weight kg 0,2 0,6 1,0 1,8 1,4 2,3 5,5 0,2 0,4
Metering range mm 10
Remarks P P F,P E,F,H,S E,F,S E,F,S F,NM,S
E: Magnet to be swtiched on/off
F: Fine adjustment
H: hydraulic clamping
NM: non-magnetic base plate, grounded on all sides
P: Permanent magnet
S: Prismatic bottom
IFH: This device is used for checking threaded holes on turning lathes and machine tools. Thanks to the small
lever gauge also threaded holes up to 60 mm depth can be metered. The device can be inserted at the
inserting spigot 8h6.
WMG: This device is used for quick and accurate metering of tube sheets.
Metering tables
Characteristics SM 25 SM 30 SM 40 SM 40-Q SM 50-Q-HG
Overall height mm 150 200 200 200 320
Metering range mm 40 100 100 100 180
Range mm 25 49 49 100 200
Length of lateral column mm 120 230
Dimensions metering surface mm Ø 20 Ø 50 60X68 60X68 150X200
Table size mm 260X150
Column diameter mm 22 22 22 35
Weight kg 1,2 2,3 3,2 3,5 9
Remarks L L L L,Q HG,Q
All metering stands and metering tables as a standard are supplied without metering gauge.
The location hole for the metering gauge is 8H7.
Custom-made models are manufactured according to drawings and requirements.
Concentricity metering devices
DIAL GAUGES INSTRUMENTS
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 22
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Concentricity metering devices
RPG
Characteristics 44/1-50 44/1-75 44/2-50 44/2-75 44/3 45 46-50 46-75 47
Maximum center distance mm 200 200 350 350 450 40
Height of centers mm 50 75 50 75 100 50 75
Length/width of
350/11 0 350/11 0 500/110 500/110 700/180 200/110 200/110
the base plate mm
Eveness of the base plate DIN 876/1 DIN 876/1
Groove width 10H7 10H7
Degree of accuracy 1
Lifting of the movable point
8
mm
Overall height with stand mm 260 260 260 260 320 200 260 260
Weight kg 8,0 9,0 11,0 12,0 35,0 2,8 4,5 5,5 1,8
Clamping range mm
Metering range mm
Distance of knurled nut –
0-20
metering axis mm
Metering range vertical mm 100
Metering range horizontal mm 40 60
Range mm 50
Range horizontal
50
Metering shackle
Clearance of the
50
horizontal metering shackle mm
Remarks P P R, S R, S S
P : Fitted prism in the case of tailstocks with 75 mm height of centers for inserting non-centered workpieces and longer parts, supporting
range in the prism 5-20mm
R : Concentricity accuracy of the sleeve 0,005 mm + tolerance of the collet chuck.
S : Supply without collet chuck
Collet chucks F10 are available with threaded holes measuring 3,0 bis 7,0 mm, smaller threaded holes can be realized on request
All concentricity metering devices as a standard are supplied without metering gauge.
The gauge location hole is ist 8H7.
Custom-made models are manufactured according to drawings and requirements
Meteor C - Standard gauges with a scale partition of 0,01 mm at favourable prices
DIAL GAUGES INSTRUMENTS
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 23
www.rambold-messgeraete.de • info@rambold-messgeraete.de
METEOR C - Standard gauges with scale partition
of 0,01 mm at favourable prices
Glass ring Number of Metering range per Stroke scale
Type Metering range Shock-proof
diameter pointers pointer rotation partition
METEOR CG 10 58 2 1 0-100
METEOR CST
METEOR CSTG
All dimensions in mm
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 24
www.rambold-messgeraete.de • info@rambold-messgeraete.de
Hand gauges for tensile force and for pressure force
Type Metering range Stroke scale partition Remarks
Tensile force (filementtesting device)
FPR 4 0-4 N 0,1N H
FPR 15 0- 15 N 0,2N H
FPR 40 0-40N 1,ON H
Tensile force and pressure force
FPRlD 4 0-4 N 0,1N D,X
FPR/D 15 0- 15 N 0,2N D,X
D : At a surplus price the devices can be equipped with rear knuckle ring, with spigot
or with threaded holes for fixing
H : With crowned handle
X : Can be supplied either with filement testing device or with hang-up ring
TECHNICAL DATA
• Measure range up to 2400 mm of circular saw blade
diameters, for tooth pitch 3... 70 mm
(Standard version 0 ... 70 mm)
• Stroke 6 mm, for difference measurement
• Measuring surface hardened, ground and hard-chromed
• Steel parts platet to prevent rust and tarnish
• Cylindrical way polished, in self-lubricating, wear-proof
bushings
• Guidance ratio 3xD
• Housing material special precision cast aluminium, sand
blastet, coatet with a neutral preservative.
Schutzanstrich
• Angle scale aluminium, black anodized, engraved gra-
duations
• Special dial gauge graduation 1/100 mm or 1/1000 Zoll
• Lens system multielement, with 7 fold magnification,
free of distortion
• Vision field of the 18 mm, chromatically corrected
magnifying glass
• Weight 520 g (standard version)
585 g (universal / universal Z version)
• Dimensions 115 x 105 x 67 mm
GENERAL INFORMATION
Please observe the notes in these operating instructions, in order
that the device will function perfectly and remain operable for a long
time.
• Immediately after receipt of the goods that the measuring
instrument not damaged and the ordered accessories are
present.
• Use the measuring instrument only intended.
• Note the fact that the dial gauge has special translation and
therefore only for circular saw blades can be used.
• Make sure during the measurements that the hair cross plate will
not damage. If necessary it is available as spare part.
Tooth height differential
measurement
Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63
www.rambold-messgeraete.de • info@rambold-messgeraete.de
25
TOOTH GEOMETRY FOR CIRCULAR N V
SAW BLADES T
h
Use of proper tooth geometry assures long α b t
blade life and maximum cutting efficiency. 45°
S
The diagramm indicates the normal tooth γ
geometry for circular saw blades.
N V N V