Professional Documents
Culture Documents
ROC110 Broch PDF
ROC110 Broch PDF
EXTRUSIONS
• Sign Frame & Architectural Systems
• Kits
• Components
B
ELECTRICAL
• Ballasts
• Lamps
• Fixtures
C
• Electrical Hardware
SUBSTRATES
• Aluminum Sheet
• Foam Boards
• Plastics D
• Composites
GRAPHICS
• Computerized Sign Making Equipment
• Consumables
• Digital Imaging Films E
HARDWARE
• Fasteners
• Tools
• Fabrication Equipment F
LAMINATING
• Wide Format Films
• Mounting Supplies
• Laminating Equipment G
All rights reserved. No part of this book may be reproduced in any form or by any means, including electronic, photocopying or recording, or by any information storage or
dissemination system, without written permission of the publisher. Manufactured in the United States of America. Copyright © 2009 Interstate Electric Co., Inc.
A-1
LIGHTING COMPONENTS ELECTRONIC HO & SLIMLINE SIGN BALLASTS
Sign Supplies
Lighting Components electronic energy efficient sign ballasts are light weight and offer full light output while saving energy and increasing the life of lamps and ballast.
Advantages include 40% less power consumption than comparable magnetic ballasts and very low starting temperature (-30°F) along with the lowest case operating
temperature. Total harmonic distortion is less then 10%, with low in-rush current for optimal system performance and an extra flexible voltage regulation, operating
at line voltages between 70V - 135V. Can be used for either HO (800mA) or Slimline (425mA) lamps. Also equipped with red and blue 11' leads. Wiring for these
ballasts are simpler, with half the connections used with old-style magnetic ballasts. Lamps are parallel wired, therefore if one burns out the others continue to operate.
4 year warranty.
£Óä6ÊÊUÊÊxäÉÈäâÊÊUÊÊ`Û`Õ>ÞÊ Ýi`ÊÊUÊÊÎäcÊ°Ê-Ì>ÀÌÊ/i«°ÊÊUÊÊ
>ÃÃÊ*
Catalog Total Lamp Max Line Max Input Open Circuit Wiring Case Weight Each
Number Min/Max Footage Current Amps. Watts Volts Diagram Dimensions (Lbs)
One, Two or Three Lamps
LIG-424-13L {¿ÊÌÊÓ{¿Ê £°£Ê £Î{Ê ÈääÊ £Ê Ê x
One, Two, Three or Four Lamps
LIG-1040-14L (1) £ä¿ÊÌÊ{ä¿Ê Ó°{Ê ÎäxÊ ÇxäÊ ÎÊ Ê n
One, Two, Three, Four, Five or Six Lamps
LIG-832-16L n¿ÊÌÊÎÓ¿Ê £°ÇÊ £nÊ ÈääÊ ÓÊ Ê n
Two, Three, Four, Five or Six Lamps
LIG-1048-26L £ä¿ÊÌÊ{n¿Ê Ó°xÊ ÓÓÊ ÇääÊ ÓÊ Ê n
NOTE: (1)
Designed specifically for use with 10' lamps.
Catalog Total Lamp Max Line Max Input Open Circuit Wiring Case Weight Each
Number Min/Max Footage Current Amps. Watts Volts Diagram Dimensions (Lbs)
One, Two or Three Lamps ÊÊ °ÇÊJÊÓän6Ê £{È
LIG-424-13MV {¿ÊÌÊÓ{¿Ê °ÈÊJÊÓ{ä6Ê £{ÈÊ ÈääÊ £Ê Ê x
Ê Ê Ê °xÎÊJÊÓÇÇ6Ê £{È
One, Two, Three or Four Lamps 1.48 @ 208V 332
LIG-104014MV (1) £ä¿ÊÌÊ{ä¿Ê £°ÓÇÊJÊÓ{ä6Ê ÎÎ£Ê nÓxÊ ÎÊ Ê n
1.1 @ 277V 329
One, Two, Three, Four, Five or Six Lamps £°äxÊJÊÓän6Ê Ó£ÈÊ
LIG-832-16MV n¿ÊÌÊÎÓ¿Ê °ÊJÊÓ{ä6Ê Ó£ÈÊ nääÊ ÓÊ Ê n
Ê Ê Ê °nÊJÊÓÇÇ6Ê Ó£È
Two, Three, Four, Five or Six Lamps ÊÊ £°x£ÊJÊÓän6Ê Î£È
LIG-104826MV £ä¿ÊÌÊ{n¿Ê °ÊJÊÓ{ä6Ê Î£ÎÊ nÓxÊ ÓÊ Ê n
.99 @ 277V 313
NOTE: (1)
Designed specifically for use with 10' lamps.
Case
Dimensions
Lighting Components Diag. 1
Mounting
Length Length Width Height
A 11-1/8 10-1/2 3 1-3/4 Optional Lead Cover
B 13-3/4 13-3/16 3 2-1/2 TP5 Lighting Components Diag. 2
Lighting Components Diag. 3
One Lamp
256-148-800 (1) 2' to 5'-4" 0.55 400 1 A 8
One or Two Lamps
256-248-800 4' to 8' .90 400 1 or 2 A 8
256-272-800 4' to 12' 1.35 500 1 or 2 A 8
Two Lamps
256-296-800Ê £Ó¿ÊÌÊ£È¿Ê £°näÊ xääÊ £ÊÀÊÓÊ Ê ££
One, Two or Three Lamps
256-348-800 4' to 12' 1.35 500 1, 3 or 8 A 8
256-396-800 10' to 24' 2.70 720 1, 3 or 8 C 14
Two or Three Lamps
256-372-800 £Ó¿ÊÌÊ£n¿Ê Ó°ääÊ xäÊ ÎÊÀÊnÊ Ê £Ó
256-3120-800Ê £È¿ÊÌÊÎä¿Ê ΰxäÊ nnxÊ ÎÊÀÊnÊ Ê £È
One, Two, Three or Four Lamps
256-464-800Ê £ä¿ÊÌÊÓÓ¿Ê Ó°{äÊ ÈnäÊ £]Ê{]ÊÈÊÀÊÊ
Ê £{
256-472-800Ê £ä¿ÊÌÊÓ{¿Ê Ó°ÇäÊ ÇÓäÊ £]Ê{]ÊÈÊÀÊÊ
Ê £{
One, Two, Three or Four Lamps
256-448-800Ê n¿ÊÌÊ£È¿Ê £°äÊ xäÊ £]Ê{]ÊÈÊÀÊÊ Ê £Ó
256-484-800Ê £È¿ÊÌÊÓn¿Ê ΰxäÊ xäÊ {]ÊÈÊÀÊÊ Ê £È
256-496-800Ê £È¿ÊÌÊÎÓ¿Ê Î°xäÊ xäÊ {]ÊÈÊÀÊÊ Ê £È
256-1588 (277V)Ê Óä¿ÊÌÊÎÓ¿Ê £°ÇäÊ ääÊ {]ÊÈÊÀÊÊ Ê £È
256-4120-800Ê Óä¿ÊÌÊ{ä¿Ê {°{äÊ ÇÓäÊ {]ÊÈÊÀÊÊ Ê £n
One, Two, Three, Four, Five or Six Lamps
256-648-800Ê £ä¿ÊÌÊÓÈ¿Ê Î°ääÊ nÓxÊ x]ÊÇÊÀÊ£äÊ Ê £È
256-672-800Ê Óä¿ÊÌÊÎÈ¿Ê {°ÎäÊ ÇÓäÊ x]ÊÇÊÀÊ£äÊ Ê £n
256-696-800 20' to 48' 5.00 720 5, 7 or 10 D 18
,iÛiÀÃi`ÊÌiÃÊ`V>ÌiÊivviÀÿÃʸ }Ê-iÛi¸ÊL>>ÃÌÃÊÜ
V
Ê>VV`>ÌiÊi>ÀÞÊiÛiÀÞÊÃ}Ê>««V>Ì°
NOTE: (1) 0°F minimum start temperature for 5' and 5'-4" lamps.
Magnetek Magnetek
Magnetek Magnetek
Diag. 9 Diag. 10
Diag. 7 Diag. 8
Sign Supplies
For high output 800mA lamps. Filled with "Solid-Fil" for reliable performance in the
most adverse conditions.
ÓäcÊ°Ê-Ì>ÀÌÊ/i«°ÊUÊ/
iÀ>ÞÊ*ÀÌiVÌi`ÊUÊ
>ÃÃÊ*
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Total Lamp Max Line Open Circuit Wiring Case Weight Each
Number Min/Max Footage Current Amps. Volts Diagram Dimensions (Lbs.)
One, Two Lamps
ASB-41212TP 4' to 12' 1.48 480 21, 39 A 12
Two, Three, Four Lamps
ASB-62024TP È¿ÊÌÊÓä¿Ê Ó°xÈÊ xäÊ x]Ên]Ê£ÎÊ Ê £Ó
ASB-122424TP £Ó¿ÊÌÊÓ{¿Ê Ó°ÇäÊ ÇnxÊ Ç]Ê]Ê£ÎÊ Ê £{
ASB-204024TP 20' (1) to 40' (1)Ê {°ääÊ ÈääÊ x]Ê]Ê£ÎÊ
Ê Ó£
Four, Five, Six Lamps
ASB-124046TP 12' (2) to 40' (2)Ê Î°äÊ ÈääÊ £{]Ê£x]Ê£Ê
Ê Ó£
ASB-244846TP 24' (3) to 48' (3) 5.19 700 14, 15, 19 C 21
NOTE:
(1)
Ê/Ì>Ê>«Êi}Ì
ÊvÊi>V
ÊVÀVÕÌÊ®Ê>`Ê ®ÊÕÃÌÊÌÊLiÊiÃÃÊÌ
>Ê£äÊvÌ°ÊÀÊÀiÊÌ
>ÊÓäÊvÌ°ÊÊ
ÀVÕÌÊ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊ£]ÊÓ°ÊÊ
ÀVÕÌÊ ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊÎ]Ê{°ÊÊ-iiÊÜÀ}Ê`>}À>î°
(2)
Ê/Ì>Ê>«Êi}Ì
ÊvÊi>V
ÊVÀVÕÌÊ®Ê>`Ê ®ÊÕÃÌÊÌÊLiÊiÃÃÊÌ
>ÊÈÊvÌ°ÊÀÊÀiÊÌ
>ÊÓäÊvÌ°ÊÊ
ÀVÕÌÊ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊ£]ÊÓ]ÊΰÊÊ
ÀVÕÌÊ ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊ{]Êx]ÊÈ°ÊÊ-iiÊÜÀ}Ê`>}À>î°
(3)
Ê/Ì>Ê>«Êi}Ì
ÊvÊi>V
ÊVÀVÕÌÊ®Ê>`Ê ®ÊÕÃÌÊÌÊLiÊiÃÃÊÌ
>Ê£ÓÊvÌ°ÊÀÊÀiÊÌ
>ÊÓ{ÊvÌ°ÊÊ
ÀVÕÌÊ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊ£]ÊÓ]ÊΰÊÊ
ÀVÕÌÊ ®ÊÃÊV«ÀÃi`ÊvÊ>«ÃÊ{]Êx]ÊÈ°ÊÊ-iiÊÜÀ}Ê`>}À>î°
Case
Dimensions
For high output 800mA lamps. For use with a high output rated flasher.
ÓäcÊ°Ê-Ì>ÀÌÊ/i«°
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Jefferson Universal Total Lamp Line Current Open Circuit Wiring Case Dimensions Weight Each
Cat. No. Cat. No. Min/Max Footage Amps. Volts Diagram ÀÊ*>}iÊ
£® (Lbs.)
Sign Supplies
Designed to withstand direct exposure to rain and snow. Encased in a round aluminum can and supplied with
ÕÌ}ÊLÀ>ViÌ°ÊÊÊÎÉ{£{ÊÌ
Ài>`i`Ê««iÊÃÊ«ÀÛ`i`Ê>ÌÊi`ÊÜ
iÀiÊÜÀ}ÊiÝÃÌð
ÓäcÊ°Ê-Ì>ÀÌÊ/i«°
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Lamp Type Line Current Open Circuit Wiring Case Weight Each
Number Min/Max Footage Amps. Volts Diagram Dimensions (Lbs.)
One Lamp
WPR481LHÊ ÞÊ£Ê"ÊUÊnääÊ>«Ê £°ÓäÊ {ÎäÊ {äÊ
Ê £Î
4' to 8'
One or Two Lamps
WPR490XLH (1)Ê ÞÊ£ÊÀÊÓÊ"ÊUÊnääÊ>«ÃÊ £°ÈäÊ {°ÈxÊ {£Ê
Ê £Ó°n
4' to 12'
Two Lamps
WPR480XLHRÊ ÞÊÓÊ"ÊUÊnääÊ>«ÃÊ £°xÊ xÎäÊ {£Ê
Ê £Ó
£Ó¿ÊÌʣȿ
WPR931Ê ÞÊÓÊ6"ÊUÊ£xääÊ>«ÃÊ °xäÊ xÎäÊ {£Ê Ê £n°Ç
£Ó¿ÊÌʣȿ
NOTE: (1)
>ÌÊLiÊÕÃi`ÊÜÌ
Ê£ÉÓ{]ÊÎÈÊÀÊ{Ó/£ÓÊ>«°
E
Sign Supplies
SIGN BALLAST
Cross Reference Chart
ÀÊ
}
ÊÕÌ«ÕÌÊnääÊ>«ÃÊUÊ£Óä6ÊUÊÈäâ
Total Lamp
Min/Max Footage FRANCE ADVANCE ALLANSON SLI/POWERLIGHTING JEFFERSON UNIVERSAL
Ê £ÉÓ¿ÊÌÊx¿Ê{¸Ê - - - - 256-148 (1) 51609XRTC
Ê £É{¿ÊÌÊn¿Ê - - - - 256-248 (1) 51742
(1)
Ê £É{¿ÊÌÊ£Ó¿Ê 268D ASB0412-12TP - V12L4-12 256-272 51601XLHRTCP
NOTE: (1)
ÊÞÊivviÀÃÊL>>ÃÌÊÜÌ
Ê>ÊÃÕvwÝÊvʸäää¸]ʸ£ää¸]ʸÈää¸ÊÀʸnää¸Ê>ÞÊLiÊÕÃi`ÊÊÃÌÊ>««V>Ìð
Sign Supplies
>`>>Ê >iÀÊ ÃÊ >Ê «ÀiVÃÊ >`iÊ ÛÞÊ «À`ÕVÌÊ ÜÌ
Ê VÃÃÌiÌÞÊ ÃÌ
Ê
Ì
iÀÜi`i`Ê
iÃ]ÊÌ«Ê>`ÊLÌÌ°ÊÊÌÊvi>ÌÕÀiÃÊ`ÕLiÊ}ÀiÌÃÊ>ÌÊÓ¿ÊÌiÀÛ>ðÊÊ
This enables the material to be split between the grommets thus leaving a grommet
at all four corners of the desired banner. Sold by the 24 yard roll.
Also available in yellow, red, blue, black and green.
Catalog Put
Number Color Width Weight Up
BAN-02-1122 7
ÌiÊ ÓÓ¸Ê ££°xÊâ°Ê £
BAN-02-1134 7
ÌiÊ Î{¸Ê ££°xÊâ°Ê £
BAN-02-1146 7
ÌiÊ {È¸Ê ££°xÊâ°Ê £
BAN-02-1422 7
ÌiÊ ÓÓ¸Ê £{Êâ°Ê £
BAN-02-1434 7
ÌiÊ Î{¸Ê £{Êâ°Ê £
BAN-02-1446 7
ÌiÊ {È¸Ê £{Êâ°Ê £
Sign Supplies
We offer a variety of industry related publications. All softcover editions.
Catalog
Number Description
SIG-48 iÊ/iV
µÕiÃÊÊÓÎÎÊ*>}iÃÊǸݣ丮
SIG-137 ¿äÓÊ-}ÜÀÌiÀÃÊ*ÀV}ÊÕ`iÊÊ{{Ê*>}iÃÊθÝx¸®
SIG-170 ¿äÓÊ
ÕÃÌÊ
iVÌÀVÊ-}Ê*ÀV}ÊÕ`iÊÊxÓÊ*>}iÃÊn°x¸Ý££¸®
SIG-171 ¿äÓÊ iÊ*ÀViÊÕ`iÊÊ{äÊ*>}iÃÊn°x¸Ý££¸®
SIG-175 ¿äÓÊ
«ÕÌiÀÊÀ>«
VÃÊ*ÀV}ÊÕ`iÊÊ{nÊ*>}iÃÊθÝx¸®
SIG-182 ¿äÓÊ-VÀii«ÀÌiÀÃÊ*ÀV}ÊÕ`iÊÊÎÈÊ*>}iÃÊθÝx¸®
SIG-197 ¿äÓÊ-}Ê
ÌÀ>VÌÀÊ*ÀV}ÊÕ`iÊÊ££nÊ*>}iÃÊn°x¸Ý££¸®
INT-NE-BOOK iÊ>`Ê
`Ê
>Ì
`iÊ}
Ì}ÊÊÓÎÊ*>}iÃÊn°x¸Ý££¸®
Catalog Put
Number Description Length Height Width Up
INT-1TO-18 -}iÊ/«"vvÊ £n¸Ê Ç¸Ê Ç¸Ê £ÓÉÇÓ
INT-1SO-24 -}iÊ/«Ê>`Ê-`i"vvÊ ÓÎÎÉn¸Ê Ç¸Ê Ç¸Ê Óx
INT-1TO-24 -}iÊ/«"vvÊ ÓÎÎÉn¸Ê Ç¸Ê Ç¸Ê Óx
INT-2SO-36 ÕLiÊ/«Ê>`Ê-`i"vvÊ ÎxÎÉn¸Ê n¸Ê Ç¸Ê Óx
INT-2TO-36 ÕLiÊ/«"vvÊ ÎxÎÉn¸Ê n¸Ê Ç¸Ê Óx
INT-3TO-21 -}iÊ£ÓäÊÊ/«"vvÊ Ó££ÉÓ¸Ê £Ó¸Ê n¸Ê Óx
Top-Off Style Transformer Box
BLOCKOUT BRUSHES
For applying blockout paint to neon tubing and for other utility uses.
Catalog Put
Number Description Width Up
SOL-7764-1/2 >VÊ ÞÊ ÀÃÌiÊ ÀÕÃ
Ê £ÉÓ¸Ê £Ó
SOL-7764-3/4 >VÊ ÞÊ ÀÃÌiÊ ÀÕÃ
Ê ÎÉ{¸Ê £Ó
A variety of buffing compounds are available for use with many types of materials. Call for more information.
ELECTRODE BUTTONS
Electrode buttons provide enlarged contact surface.
Catalog Put
Number Description Up
STA-15B £xÊÊ À>ÃÃÊ
iVÌÀ`iÊ ÕÌÌÃÊ £ääÉ£
Electrode Button
Shown on Electrode
ELECTRODE CAPS
Electrode caps provide a capped contact surface. Electrode Saver caps are
used on electrodes that have had the electrode wires broken off. The wire
mesh within the electrode cap will provide an effective electrical contact to
the broken off wire stub. Available in 15mm only.
Catalog
Number Description Dia. Length (1)
STA-12C À>ÃÃÊ
>«ÊÜÉÀvÌÊiÃÊ £ÓÊÊ xÉn¸
STA-12LC À>ÃÃÊ
>«ÊÜÉÀvÌÊiÃÊ £ÓÊÊ £¸ Caps
STA-15C À>ÃÃÊ
>«ÊÜÉÀvÌÊiÃÊ £xÊÊ xÉn¸
STA-15LC À>ÃÃÊ
>«ÊÜÉÀvÌÊiÃÊ £xÊÊ £¸
EGL-19C À>ÃÃÊ
>«ÊÜÉÀvÌÊiÃÊ £ÊÊ £¸
ROS-15 Electrode Saver Cap 15 mm -
(2)
MAS-QEC-12
««iÀÊ
>«ÊÜÉÀvÌÊiÃÊ £ÓÊÊ £¸
MAS-QEC-13 (2)
««iÀÊ
>«ÊÜÉÀvÌÊiÃÊ £ÎÊÊ £¸
MAS-QEC-15 (2)
««iÀÊ
>«ÊÜÉÀvÌÊiÃÊ £xÊÊ ££Én¸
NOTE: (1) Approximate length. (2)
ÀÊÕÃiÊÜÌ
Ê>ÃÌiÊ+ÕV-ÛiÀÊiiVÌÀ`ið
ROS-15
Shown in use on Electrode
/-Ê",Ê*-/
-
Sign Supplies
IPS-3: Non-flammable, water thin, very fast-setting solvent cement for acrylics. Also Catalog Put
Number Description Mfgr. Up
bonds styrene, butyrate and polycarbonate to themselves. Will not bond to cross-linked
>VÀÞVðÊÊÌ>ÊL`Ê`iÛi«ÃÊÜÌ
ÊÕÌiÃÊ>`ÊÀi>V
iÃÊVÀi>Ãi`ÊÃÌÀi}Ì
ÊÀ>«`Þ°ÊÊ IPS-3G ÀÊVÀÞVÃÊ *-Ê >
Humid conditions during application may cause a whitish (blushing) joint. IPS-4G ÀÊVÀÞVÃ]Ê ÕÌÞÀ>ÌiÃ]Ê-ÌÞÀiiÊEÊ*ÞV>ÀL>ÌiÃÊ *-Ê >
IPS-16G ÀÊVÀÞVÃ]Ê ÕÌÞÀ>ÌiÃ]Ê-ÌÞÀiiÊEÊ*ÞV>ÀL>ÌiÃÊ *-Ê >
IPS-4: Non-flammable, water thin, moderately fast-setting solvent cement for
acrylics. Also bonds styrene, butyrate and polycarbonate to themselves. Will not bond IPS-16T ÀÊVÀÞVÃ]Ê ÕÌÞÀ>ÌiÃ]Ê-ÌÞÀiiÊEÊ*ÞV>ÀL>ÌiÃÊ *-Ê xÊâ°Ê/ÕLi
ÌÊVÀÃÃi`Ê>VÀÞVðÊÊÌ>ÊL`Ê`iÛi«ÃÊ`iÀ>ÌiÞÊv>ÃÌÊ>`ÊÀi>V
iÃÊvÕÊÃÌÀi}Ì
Ê IPS-40P ÀÊVÀÞVÃ]Ê
ÌV°Ê *-Ê *Ì
within hours. Creates a high strength bond to acrylics, styrenes, butyrates but creates
50 ml.
a low strength bond to polycarbonates. Humid conditions during application may cause IPS-55 ÀÊ*ÞV>ÀL>ÌiÃ]Ê -Ê>`Ê ÕÌÞÀ>ÌiÃÊ *-Ê Õ>Ê
>ÀÌ°
LÕÃ
}ÊiÃÃÊiÞÊÌ
>Ê*-ή° ÊÊ Ê Ê ÜÉââi
IPS-16: Fast-drying, high-strength acrylic cement. Also bonds styrene, butyrate, 50 ml.
IPS-58 ÀÊ*ÞV>ÀL>ÌiÃ]Ê -Ê>`Ê ÕÌÞÀ>ÌiÃÊÊ>ÃÌÊ-iÌÊ *-Ê Õ>Ê
>ÀÌ°
polycarbonate and other plastics and porous surfaces. Will not bond to crossed-linked ÊÊ Ê Ê ÜÉââi
acrylics. Has a medium viscosity which forms a quick initial bond to facilitate handling.
50 ml.
Ì>ÊL`Ê`iÛi«ÃÊÀ>«`ÞÊ>`ÊÀi>V
iÃÊvÕÊÃÌÀi}Ì
ÊÜÌ
Ê
ÕÀðÊÊ/
ÃÊViiÌÊVÀi>ÌiÃÊ IPS-56 ÀÊ-}Ê>]Ê*6
]ÊÕ°Ê>`Ê-ÌiiÊ *-Ê Õ>Ê
>ÀÌ°
a low strength bond to polycarbonates. ÊÊ Ê Ê ÜÉââi
IPS-40: Two-part, reactive, high-strength cement for bonding acrylics to each other IPS-1802G ÀÊVÀÞVÃ]Ê -]Ê ÕÌÞÀ>ÌiÃ]Ê*6
Ê>`Ê-ÌÞÀiiÊ *-Ê >
>`ÊÌÊ«ÞiÃÌiÀ]ÊLÕÌÞÀ>Ìi]Ê*6
]ÊÃÌÞÀii]ÊÜ`]ÊiÌV°ÊÊiiÌÃÊÊ-«iV IPS-2007G ÀÊ*6
Ê *-Ê >
nxÇÈÊ/Þ«iÊ° IPS-4007G (1)
ÀÊ -]Ê-ÌÀ>Ê *-Ê >
IPS-55: VOC-free, clear, two-part, reactive, urethane-based adhesive for bonding CYR-117G For Acrylics Cyro Gallon
«ÞV>ÀL>Ìi]ÊLÕÌÞÀ>Ìi]Ê -Ê>`Ê*
/°ÊÊ,iVi`i`ÊvÀÊL`}ÊLÕÌÞÀ>ÌiÊÌÀÊÌÊ INT-CB-Q
>iÊ ` +Õ>ÀÌ
polycarbonate faces in channel letter manufacture. Excellent UV light resistance. Forms INT-CB-G
>iÊ `Ê Ê >
>Ê
}
ÊÃÌÀi}Ì
ÊL`Ê>ÌÊÀÊÌi«iÀ>ÌÕÀiÊÊ>ÊviÜÊ
ÕÀðÊÊ*>V>}i`ÊÊ>Ê£\£]ÊxäÊ NOTE: (1)
ÊÜÊ6"
ÊÛiÀÃÊvÊ*-£ääÇ°
V>ÀÌÀ`}i°ÊÊ-«iV>ÊÝ}ÊââiÊVÕ`i`°ÊÊiÃ}i`ÊvÀÊÕÃiÊÊÌ
iÊ*-1 xäÊ`ëiÃiÀÊ
}Õ°ÊÊ i>`ÊVÕÀiÊÃÊ££ÉÓ¸ÊÌÊÓÊ
ÕÀð
IPS-1802: i`ÕÃiÌÌ}]Ê}
ÌL`i`ÊViiÌÊvÀÊL`}Ê>VÀÞV]ÊÃÌÞÀii]ÊÀ}`Ê
*6
]Ê -Ê>`ÊLÕÌÞÀ>ÌiÊÌÊÌ
iÃiÛiÃÊ>`ÊÌÊi>V
ÊÌ
iÀ°ÊÊÌ>ÊL`Ê`iÛi«ÃÊÜÌ
Ê>Ê
few hours and reaches high strength in 24 to 48 hours gradually increasing for several
weeks.
IPS-2007: 7>ÌiÀÊÌ
]ÊÛiÀÞÊv>ÃÌÊÃiÌÌ}ÊÃÛiÌÊViiÌÊvÀÊL`}Ê*6
]Êv>i`Ê
*6
Ê>`ÊÞ`iÝÊÌÊÌ
iÃiÛiÃÊ>`ÊÌÊi>V
ÊÌ
iÀ°
IPS-4007: ÊÜÊ6"
ÊÛiÀÃÊvÊ*-£ääÇ°ÊÊÊVi>À]ÊÌ
L`i`]ÊÛiÀÞÊv>ÃÌÊÃiÌÌ}Ê
ViiÌÊvÀÊL`}ÊÀ}`ÊÛÞ]Êv>i`Ê*6
]Ê-ÌÀ>Ê>`ÊÞ`iÝ°
CYR-117: A clear acrylic cement that is free of Dichloromethane. Does not cause
VÀ>â}ÊÀÊLÕÃ
}ÊÜ
iÊÕÃi`Ê>ÃÊÀiVi`i`°
INT -CB:
>iÊ `ÊÃÊ>ÊÊi«>ÀÌ]ʵÕVÊÃiÌÌ}]Ê
}
ÊÃÌÀi}Ì
Ê>`
iÃÛi°Ê
Especially useful in bonding letter trim (cellulose acetate butyrate) to polycarbonate.
ÃÊL`ÃÊ>VÀÞVÊ>`Ê`wi`Ê>VÀÞVÊÌÊ«ÞV>ÀL>Ìi°Ê1ÃiÊ>Ê9*{Ê>««V>ÌÀÊÌÊ
>««Þ°Ê iÊÃÕÀiÊÃÕÀv>ViÃÊÌÊLiÊL`i`Ê>ÀiÊVi>Ê>`ÊÃÌ
°Ê-
ivÊviÊÃÊÈÊÌ
ÃÊÀÊ
more when kept at 35°F to 85°F conditions.
IPS-55, IPS-56, IPS-58 IPS-16T
PLASTIC CLEANERS
/ "\Ê1Ãi`ÊÌÊVi>Ê>Ài>ÃÊvÊ>VÀÞVÊÃ
iiÌðÊÊ ÌÊvÀÊÕÃiÊÊ
ÊÀÊLÕÌÞÀ>ÌiÊ
sheet. Catalog Put
*-xÇ\ÊÊ>Ê«ÕÀ«ÃiÊ«>ÃÌVÊVi>iÀÊÃÕÌ>LiÊvÀÊÕÃiÊÊ>VÀÞVÃ]Ê«ÞV>ÀL>ÌiÃ]Ê Number Description Mfgr. Up
ÛÞÃ]Ê -Ê>`ÊÃÌÞÀii°ÊÊi«ÃÊ`Ãë>ÌiÊÃÌ>ÌVÊV
>À}iÊ>`Êi>ÛiÃÊ>ÊÃÕÀv>ViÊVi>ÀÊ INT-013G iÌ
>Ê Ê >
of residue. Ê /ä£ÎÊ iÌ
>Ê Ê xÊ>
-*
\Ê
i>ÃÊi>ÀÞÊiÛiÀÞÊÌÞ«iÊvÊ«>ÃÌVÊÜÌ
ÕÌÊ`>>}}ÊÀÊ`ÃÃÛ}Ê IPS-57AG *>ÃÌVÊ
i>iÀÊ *-Ê >
the plastic itself. Leaves a protective anti-static wax coating that keeps the sign Ê-*
Ê ÀÌiÊ*>ÃÌVÊ
i>iÀÊ -Ê >
Ê-**
Ê ÀÌiÊ*Ài«>ÌÊ
i>iÀÊ -Ê >
cleaner longer. Does not contain harmful chemicals.
-**
\Ê
i>iÀÊvÀÊ«>ÃÌVÊ«ÀÀÊÌÊ«>Ì}°ÊÊ,iÛiÃÊÃÌ>ÌV]ÊÜ>Ý]Ê`ÕÃÌÊ>`Ê
other foreign matter to facilitate good paint adhesion. Does not contain harmful
chemicals.
Sign Supplies
Lord acrylic adhesives are versatile and ideal for use with a wide range of materials, including minimally prepared or unprepared metal surfaces. Lord 400 Series acrylic
adhesives carry the distinction of bonding the largest variety of metals in the world. Lord acrylic adhesives are not limited to metal applications; they also bond plastics
>`ÊViÀ>VÃ]ÊÌ
iÀ«>ÃÌVÃÊiÊ«Þ«À«ÞiiÊ>`Ê -Ê>`ÊÌ
iÀÃiÌÃÊiÊwLiÀ}>ÃÃ]ÊÃ
iiÌÊ`i`ÊV«Õ`ÃÊ-
®Ê>`ÊwLiÀÊÀivÀVi`Ê«>ÃÌVÃÊ,*®°ÊÊÀ`Ê>VÀÞVÊ
adhesives resist severe environmental conditions and bond with minimal surface preparation. Oily metal alloys bond with little preparation. Other advantages are fast
cure at room temperature, easy to use with convenient no-mix feature and meets VOC regulations. Lord acrylic adhesives are two-part systems that use accelerators to
cure. Consult the Lord Adhesives Selection Guide at the bottom of this page for product specifications and applications.
Lord 400 Series acrylic adhesives offer extremely high impact and peel strength. They bond minimally prepared metals and plastics and achieve high shear strengths.
They also provide excellent environmental and chemical resistance.
Lord two-part urethane adhesives provide superior bonds with minimal surface preparation for today's high-performance thermosets and thermoplastics. They offer
«ÀiÀiÃÃÊ>`
iÃÊvÀÊÃ
iiÌÊ`i`ÊV«Õ`ÃÊ-
®Ê>`Ê>ÀiÊ`i>ÊvÀÊ«Ài«>Ài`ÊiÌ>Ã]ÊÀÕLLiÀÊ>`ÊwLiÀÊÀivÀVi`Ê«>ÃÌVðÊÊÀ`ÊÕÀiÌ
>iÊ>`
iÃÛiÃÊVÕÀiÊ>ÌÊÀÊ
temperature and can also be accelerated with heat. They bring excellent structural integrity to assemblies made of plastic, metal, foams and elastomers. Lord urethane
adhesives provide outstanding hot strength to 250°F (121°C), are environmentally friendly and require no special pumping equipment.
ÊÀ`Ê>`
iÃÛiÊ«À`ÕVÌÃÊ>ÀiÊi«ÌÊÊÕÀÊiÝVÕÃÛiÊV>ÌiÊVÌÀi`Ê""ÊÀÊÌÊ>ÃÃÕÀiʵÕ>ÌÞÊ>`Ê«ÌÕÊÃ
ivÊvi°ÊÊ>ÞÊÌ
iÀÊ>`
iÃÛiÃÊ>`Ê>VViiÀ>ÌÀÃÊ>ÀiÊ
>ÃÊ>Û>>Li°ÊÊ*>Vi`Ê£ÓÊ«iÀÊV>Ãi°
Catalog Cement
Number Type Size
LOR-40319-50 Acrylic Adhesive 50ml Cartridge
50ml Cartridge LOR-40319-CX Acrylic Adhesive 380ml Cartridge
LOR-40619-50 Acrylic Adhesive 50ml Cartridge
LOR-40619-CX Acrylic Adhesive 380ml Cartridge
LOR-41019-CX Acrylic Adhesive 380ml Cartridge
380ml Cartridge LOR-7542AB50 Urethane Adhesive 50ml Cartridge
LOR-7550AC50 Urethane Adhesive 50ml Cartridge
LOR-32032250 Epoxy 50ml Cartridge
LOR-320322CX Epoxy 380ml Cartridge
LORD-PAK DISPENSING SYSTEMS & ACCESSORIES
",*ÊxäÊ>`
iÃÛiÊ`ëiÃ}ÊÃÞÃÌiÊVÃÃÌÃÊvÊ>Ê
>`
i`]ÊÌÜV«iÌÊ>`
iÃÛiÊ`ëiÃiÀ]Ê>Ê`Õ>L>ÀÀiÊV>ÀÌÀ`}iÊ>`Ê>Ê`ëÃ>LiÊÃÌ>ÌVÊÝiÀ°ÊÊ`i>ÊvÀÊ
off-site repair and assembly. A durable, portable and well-balanced dispensing gun for production situations that do not require application of long beads of material.
An easy, efficient and economical alternative to manual proportioning and mixing of half pints and quarts.
",* CX 380ml adhesive dispensing system consists of a coaxial cartridge with an inner wall separating the two components, a manual dispensing gun, retaining
ÕÌÊ>`Ê`ëÃ>LiÊÃÌ>ÌVÊÝiÀ°ÊÊ`i>ÊvÀÊwi`ÊÀi«>ÀðÊÊÊ«iÕ>ÌVÊÛiÀÃÊvÀÊ«À`ÕVÌÊÃÌÕ>ÌÃÊÃÊ>ÃÊ>Û>>Li°
Catalog
Number Description
LOR-GUN-50Ê xäÊëiÃiÀÊÜÉÊ*Õ}iÀÊ(1)
LOR-GUN-CX 380ml Dispenser
LOR-PL-41Ê {\£Ê,>ÌÊ*Õ}iÀÊvÀÊxäÊëiÃiÀÊÊ(2)
LOR-TIP-50Ê xäÊëÃ>LiÊ-Ì>ÌVÊÝ}Ê/« Mixing Tips LOR-GUN-50
LOR-TIP-CXÊ ÎnäÊëÃ>LiÊ£É{¸Ê-Ì>ÌVÊÝ}Ê/«
LOR-TIP-CX38Ê ÎnäÊÎÉn¸ÊëÃ>LiÊ£ÉÓ¸Ê-Ì>ÌVÊÝ}Ê/«
NOTE:........... (1)Ê1ÃiÊÜÌ
Ê",*{£Ê*Õ}iÀ°ÊÊ(2) Other ratios also available.
Designed for large dial outdoor clocks up to 48". The long arbor helps prevent shadows in
Õ>Ìi`ÊÃ}ÃÊÀÊVVðÊÊ>Õ>ÊÃiÌÊÛiiÌÃÊ>ÀiÊÃiÌÊLÞÊ>Õ>ÞÊÛ}ÊÌ
iÊ
>`ÃÊÌÊ
the correct time. Remote set movements have a separate setting motor to move the hands
fast forward which is activated by a remote momentary contact switch or the A970 indoor
ÀiÌiÊÃÜÌV
°ÊÊ££ä6ÊUÊÈäâ
/
iÊÓää1 ÊÃiÌÊvÊ
ÕLÃÊ>`>«ÌÃÊÞÕÀÊVÕÃÌÊ
>`ÃÊÌÊÌ
iÊ>ÀLÀÊÃ
>vÌðÊÊ>`ÃÊ>ÀiÊ>Û>>LiÊ
ÊÃiÛiÀ>ÊÃÌÞiÃÊvÀÊiÀV>Ê/iÊEÊ-}>Ê>`ÊÜ
iÊÕÃi`]ÊÊ
ÕLÊÃiÌÊÃÊiViÃÃ>ÀÞ°
Catalog
Number Description A B C
AME-H200M4 >Õ>Ê
VÊÛiiÌÊ {£ÉÓ¸Ê ÎÎÉ{¸Ê θ
AME-H200R4 ,iÌiÊ
VÊÛiiÌÊ {£ÉÓ¸Ê ÎÎÉ{¸Ê θ
AME-H200HUB ÕLÊ-iÌÊvÀÊÓääÊÛiiÌÊ Ê Ê
AME-A970 `ÀÊ,iÌiÊ-iÌÊ-ÜÌV
Ê Ê Ê
,
Ê/1
Ê--Ê
Crackle tube neon creates a dynamic effect similar to fast arcs of
electricity or lightning contained within the walls of the glass tube.
Along with special pumping procedures, the glass fills described
below are used inside the tube to obstruct the common flow of
the electrical arc to create this striking effect.
---ÊVÃÃÌÃÊvÊÃ>ÊLÀiÊ«iViÃÊvÊ{Ê"°°ÊÌ
Ü>Ê
Ã`>ÊiÊ}>ÃÃÊÊÛ>ÀÞ}ÊÎÉn¸ÊÌÊ£¸Êi}Ì
ðÊÊÕÊi}Ì
ÊÃÌVÃÊ
also available.
££ä£äÓÊ>ÀiÊÎÊ"°°ÊÃ`ÊLÀÃV>ÌiÊ}>ÃÃÊLi>`ðÊÊ i>`ÃÊ
give a uniformed look to a crackle tube piece. 2mm through
ÈÊLi>`ÃÊ>ÀiÊ>Û>>Li°
Catalog Put
Number Description Up
ABS-GLASS {Ê>ÃÃÊ*iViÃÊ £ÊL°
CG-1101-02 ÎÊ>ÃÃÊ i>`ÃÊ £ÊL°Ê
(12,500)
EDGEMATE EDGING
Edgemate edging is a .017 thick polyester laminate edging pre-coated with either a pressure sensitive
ÀÊ
}
Êëii`Ê
i>Ì>VÌÛ>Ìi`Ê}Õi°ÊÊÌÃÊ`ÕÀ>LÌÞÊ>iÃÊÌÊ`i>ÊvÀÊi`}iÃÊvÊL>À`ÃÊÌ
>ÌÊ>ÀiÊÃÕLiVÌÊÌÊ
wear. Other edging styles, widths and colors available. Sold by the roll.
The EDG-Z1523 hand iron is also available for applying heat activated edging to smaller parts.
Ê
>Ì>}Ê Ê Ê 7`Ì
Ê /
ViÃÃÊ *ÕÌ
Number Description Color (Inches) (Inches) Up
EDG-D3160.50 *ÀiÃÃÕÀiÊ-iÃÌÛiÊ
`}}Ê >VÊ £ÉÓÊ °ä£ÇÊ Óxä¿
EDG-D3160-1 *ÀiÃÃÕÀiÊ-iÃÌÛiÊ
`}}Ê >VÊ £Ê °ä£ÇÊ Óxä¿
EDG-D3170.50 *ÀiÃÃÕÀiÊ-iÃÌÛiÊ
`}}Ê 7
ÌiÊ £ÉÓÊ °ä£ÇÊ Óxä¿
EDG-D4160.50 i>ÌÊVÌÛ>Ìi`Ê
`}}Ê >VÊ £ÉÓÊ °ä£ÇÊ ÎÎο
EDG-D4160.75 i>ÌÊVÌÛ>Ìi`Ê
`}}Ê >VÊ ÎÉ{Ê °ä£ÇÊ ÎÎο
EDG-D4160187 i>ÌÊVÌÛ>Ìi`Ê
`}}Ê >VÊ ÎÉ£ÈÊ °ä£ÇÊ ÎÎο
EDG-Z1523
EDG-D4170.50 i>ÌÊVÌÛ>Ìi`Ê
`}}Ê 7
ÌiÊ £ÉÓÊ °ä£ÇÊ ÎÎο
EDG-D4170.75 i>ÌÊVÌÛ>Ìi`Ê
`}}Ê 7
ÌiÊ ÎÉ{Ê °ä£ÇÊ ÎÎο
EDG-Z1523 >`ÊÀÊ««V>ÌÀÊvÀÊi>ÌÊVÌÛ>Ìi`Ê
`}}
Sign Supplies
Ê
>`ÞÊiÊÌÕL}ÊVÕÌÌiÀÊÜ
V
Ê>iÃÊÌÃÊVÕÌÊÊÇÊÃiV`ðÊÊ`i>Ê
Ü
iÊ>}Ê>ÊÕLiÀÊvÊVÕÌðÊÊÌÊViÃÊÜÌ
ÊVÕÌÌ}Ê«ÃÊvÀÊ££]Ê
12mm, 13mm, 15mm and 20mm glass. Will not leave rough edges
as caused by dull files.
Catalog
Number Description
KIT-KGC Electric Glass Cutter
KIT-KCH Cutter Head Only
KIT-KWL-* ,i«>ViiÌÊ«Ã]ÊxÉ*}°
Ordering Information
KIT-KWL-*: Substitute "*" suffix with loop size desired.
Replacement loops available in the following sizes:
8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 15mm,
18mm, 20mm and 25mm.
8
Ê
/
Ê-
/
>}ÕÊ>}iÌVÊyiÝLiÊÃ
iiÌ}ÊÃÊ`ÕÀ>LiÊ>`ÊiVV>°ÊÊÌÊVÌ>ÃÊÊ
«>ÃÌVâiÀÃÊ>`ÊÜÊÌÊ`ÀÞÊÕÌÊ>`ÊVÀ>V°ÊÊÕiÊÌÊ>Ê
}
ÊÌiÃÌÞÊÕÌ«iÊ
magnetic arrangement, it produces superior holding power on most metallic
surfaces. Die cutting and knife cutting produce clean results easily. These features
make this product excellent for advertising specialties, automobile and architectural
Ã}>}iÊ>}Ê>ÞÊÌ
iÀÊÕÃiðÊ-ÕÌ>LiÊvÀÊÕÌ`ÀÊÕÃi°ÊÊ"Ì
iÀÊÃâiÃ]ÊVÀÃÊ
and types available upon request.
Catalog Put
Number Dimensions Color Up
MAG-10M Ó{¸ÊÝÊ£ä¿ÊÝÊ°äÎäÊ >ÌÌiÊ7
ÌiÊ £Ê,
MAG-25M Ó{¸ÊÝÊÓx¿ÊÝÊ°äÎäÊÊ >ÌÌiÊ7
ÌiÊ £Ê,
MAG-50M Ó{¸ÊÝÊxä¿ÊÝÊ°äÎäÊ >ÌÌiÊ7
ÌiÊ £Ê,
MAG-10G 24" x 10' x .030 Gloss White 1 Roll
MAG-25G 24" x 25' x .030 Gloss White 1 Roll
MAG-50G 24" x 50' x .030 Gloss White 1 Roll
MAG-10BLKM Ó{¸ÊÝÊ£ä¿ÊÝÊ°äÎäÊ >ÌÌiÊ >VÊ £Ê,
EGL electrodes have consistently raised industry standards for reliability and performance since the introduction in 1930. Along with the quality these electrodes are
known for, there have been improvements made on various models such as; heavier gauge, solid nickel, corrosion-proof, seven-strand lead wires. Thicker tubulation
walls for easier, stronger, tip-offs. Stronger inner lead wires are used to keep shell centered in the tube and reduce vibration. State-of-the-art inverter welding provides
superior shell support and conductivity. After forming, shells receive proprietary nickel plating for uniform, non-porous coverage. Electrodes are fully annealed to relieve
stress, preventing cracking. Thicker shell walls heat up evenly, eliminating hot spots promoting uniform conversion of emission coating. Newly developed emission
coating is measured precisely for each shell ensuring that all shells "come up" evenly during bombardment. EGL electrodes also feature a patented ceramic collar which
centers the shell in the tube, eliminating side ignition, sputtering and blackening. 100% American made.
Catalog Number Glass Dimensions Shell Dimensions mA Reference
Non-Tubulated Tubulated Diameter Length Diameter Length Rating Notes Catalog Number
07-DL T07-DL nÊ £°Óx¸Ê ÎÉ£È¸Ê ÎÉn¸Ê ÓäÊ Ê 8S
07-DL-MICA T07-DL-MICA nÊ £°Óx¸Ê ÎÉ£È¸Ê ÎÉn¸Ê ÓäÊ Ê 07-DL-MICA
12C-DS T12C-DS £äÊ Ó¸Ê £É{¸Ê ÎÉ{¸Ê ÓäÎäÊ Ê 10S
9CMCPR-DS T9CMCPR-DS £ÓÊ Ó¸Ê xÉ£È¸Ê ÎÉ{¸Ê ÎäÊ
]Ê Ê 12CM
9C-DS T9C-DS £ÓÊ Ó°x¸Ê xÉ£È¸Ê ££É£È¸Ê ÎäÊ Ê 12L
13SHORT-DS T13SHORT-DSÊ £ÎÊ Ó¸Ê ÎÉn¸Ê É£È¸Ê ÎäÊ Ê 13S
9CCPR-DS T9CCPR-DSÊ £ÎÊ Ó°x¸Ê xÉ£È¸Ê ££É£È¸Ê Îä{xÊ
]Ê Ê 13CL
8CCSPR-DS T8CCSPR-DS £xÊ Ó¸Ê ÎÉn¸Ê É£È¸Ê Îä{xÊ
Ê 15CS
8CMCPR-DS T8CMCPR-DSÊ £xÊ Ó°ÎÇx¸Ê ÎÉn¸Ê £¸Ê ÎäÈäÊ
]Ê Ê 15CM
15CL T15CLÊ £xÊ Ó°nÇx¸Ê ÎÉn¸Ê ££É{¸Ê näÊ
]Ê Ê 15CL
15CL-25/8 T15CL-25/8Ê £xÊ Ó°ÈÓx¸Ê ÎÉn¸Ê ££É{¸Ê näÊ
]Ê Ê 15CL-25/8
19CC-DS T19CC-DSÊ £Ê Ó°nÇx¸Ê £ÉÓ¸Ê ££É{¸Ê £Óä£näÊ
Ê 19CM
19LCC-DS T19LCC-DSÊ £Ê ΰ£Óx¸Ê £ÉÓ¸Ê £É£È¸Ê ÓääÊ
Ê 19CL
HIMA800-DS THIMA800-DSÊ £Ê Ó°nÇx¸Ê £ÉÓ¸Ê ÇÉn¸Ê ÎääÈääÊ IÊ HIMA800-DS
NOTE:ÊÊ
ÊrÊ
iÀ>VÊ
>ÀÊÊÊÊÊÊÊÊ ÊrÊ ÊV>ÊÊÊÊÊÊÊÊIÊrÊ"Ê
MASONLITE ELECTRODES
ÊÀ`iÀÊÌÊ>V
iÛiÊÌ
iÊ
}
iÃÌʵÕ>ÌÞ]Ê>ÃÌiÊiiVÌÀ`iÃÊ>ÀiÊ`ii«Ê`À>ÜÊvÀÊ«ÕÀiÊÃvÌÊÀÊ>`ÊViÊ«>Ìi`ÊÊ>Ê`i`V>Ìi`Ê«>ÌÊvÀʵÕ>ÌÞÊVÌÀÊ>`ÊÌÊ«ÀiÛiÌÊ
contamination. Follwing the plating, shells are heated to high temperatures in a vacuum chamber to remove any additional gasses or volatile contaminants which
may have been trapped in the metal. Without this process, impurities could remain in the shell which could shorten the life of the tube. The lead wires are high
quality stranded nickel for added flexibility and corrosion resistance.
>ÃÌiÊ+ÕVÃÛiÀ™ electrodes eliminate the need for free mercury in the workroom. The consistent dose is encapsulated in the electrode, no special handling
ÀiµÕÀi`°ÊÊ/Ài>ÌÊÌ
iÊiiVÌÀ`iÊ>ÃÊ>ÊVÛiÌ>ÊÌÕLÕ>Ìi`ÊiiVÌÀ`i°ÊÊ7i`ÊÊÌ
iÊÌÕLiÊ>`Ê«ÀViÃÃÊ>ÃÊÀ>°ÊÊiÀVÕÀÞÊÃÊ`ëiÃi`ÊÌÊÌÕLiÊ>ÌÊÌ
iÊi`ÊvÊÌ
iÊ
«Õ«}ÉLL>À`}Ê«ÀViÃðÊÊ/
iÊÌÕLiÊV>ÊLiÊÃi>i`ÊvvÊ>`ÊÛi`ÊÌÊÌ
iÊ>}i}ÊÌ>LiÊLivÀiÊÌ
iÊiÀVÕÀÞÊÃÊ`ëiÃi`ÊÌ
ÕÃÊÀÛ}Ê«À`ÕVÌÛÌÞ°ÊÊëiÃiÊ
Ü
iÊVÛiiÌ]ÊiÛiÊ`>ÞÃÊ>ÌiÀ°ÊÊÊÌ
>ÌÊÃÊÀiµÕÀi`ÊÌÊÀii>ÃiÊÌ
iÊiÀVÕÀÞÊÌÊÌ
iÊÌÕLiÊÃÊ>ÊÌÀ>ÃvÀiÀÊvÊÈäÊ°
7
iÊÕÃ}Ê+ÕV-ÛiÀ™ÊÊiiVÌÀ`iÃ]ÊÕÃiÊÌ
iÊÃ>iÊÌÞ«iÊvÊÃÌ>`>À`Ê>ÃÌiÊÌÕLÕ>Ìi`ÊiiVÌÀ`iÊÌÊV«iÌiÊÌ
iÊ«>À°
Ê /ÕLÕ>Ìi`Ê /ÕLÕ>Ìi`Ê +ÕVÃÛiÀÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊ>ÃÃÊiÃÃÊÊ Ê Ê
Catalog Number Catalog Number Catalog Number Diameter Length Rating Notes
MAS-8/15 MAS-8/15TÊ Ê nÊ £xÉn¸Ê £äÓäÊ --
MAS-10/20C MAS-10/20CT - 10mm 2" 15-25 C
MAS-12/30C MAS-12/30CTÊ Ê £ÓÊ Ó£ÉÓ¸Ê ÓxxäÊ
NOTE:ÊÊ
ÊrÊ
iÀ>VÊ
>ÀÊÊÊÊÊÊ--ÊrÊ-Ì>iÃÃÊ-ÌiiÊ-
iÊÊÊÊÊ ÊrÊ ÊV>
Sign Supplies
Eurocom EGL Masonlite Voltarc
Part Number Part Number Part Number Part Number
- 07-DL-MICA 8/15 -
- 12C-DS 10/20 10V20
50R 9CCPR-DS 12/30C or 13/30C 13V30
30R 9CMCPR-DS 13/25C 13SV3021/4
- 8CS-DS 15/25 -
45R 8CMCPR-DS 15/30C 15V45
- 8C-DS 15/50 -
80R 15CL 15/50C 15V80
75R 3CS-DS 18/60C -
150R 19CC-DS 18/120C 19V120
250R 19LCC-DS 18/250C -
120R - 18/100C -
NOTE:Ê ÀÊÌÕLÕ>Ìi`\Ê
ÕÀVÊ>``ÊÃÕvwÝʸ*¸]Ê
Ê>``Ê«ÀiwÝʸ/¸]
Ê >ÃÌiÊ>``ÊÃÕvwÝʸ/¸]Ê6Ì>ÀVÊ>``ÊÃÕvwÝʸ/¸°
GTO CABLE
/"ÊÃÊ}>ÃÊÌÕLiÊÃ}Ê>`ÊÊLÕÀiÀÊ}ÌÊV>LiÊÕ«ÊÌÊ£x]äääÊÛÌðÊÊ/"£x*£äÊ
}À>ÞÊÊ-Õ«iÀiÝÊÃÊ«>LiÊ>`ÊÃÌÀ«ÃÊi>ÃÞ°ÊÊ/"£x-68Êi>ÌiÃÊÌ
iÊii`Ê
for GTO sleeving or covering in neon installations due to a built-in integral sleeve
`iÃ}°ÊÊ*>V>}i`ÊÊ`ëiÃiÀÊLÝiðÊÊ/"£ä/
Ê>`Ê/"£x/
ÊÃÊ>ÊiÝÌÀiiÞÊ
flexible, durable and reliable GTO cable suitable for any installation including metallic
V`ÕÌ°ÊÊÌÊÃÊ«iÀÛÕÃÊÌÊ16]ÊâiÊ>`ÊÃÕ}
ÌÊÜÌ
Ê>Êvië>ÊvÊÓäÊÞi>ÀÃÊ
ÀÊÀi°ÊÊ*>V>}i`ÊÊÀiið
Catalog Trade Max Temp Wire Gauge Rating O.D. Put Min.
Number Name °C Color AWG Volts Mfgr. Inches Up Order
GTO15PAI-OP /Õv`iÊ `iÊiÝÊ £äxÊ >VÊ £{Ê £x]äääÊ *>}iÊ °Ó{ÎÊ Óxä¿Ê xä¿
GTO15PAI-10 Ê-Õ«iÀiÝÊ £äxÊ À>ÞÊ £{Ê £x]äääÊ *>}iÊ °ÓxäÊ Óxä¿Ê xä¿
GTO15TECW250 Silitherm Silicone 150 White (1) 14 15,000 Tecnolux .350 250' 250' Roll (2)
GTO10PAI-01 /Õv`iÊ £äxÊ >VÊ £nÊ £ä]äääÊ *>}iÊ °£näÊ Óxä¿Ê Óxä¿
GTO10TECW250 Silitherm Silicone 150 White (1) 18 10,000 Tecnolux .290 250' 250' Roll (2)
GTO15WES-01 iÝÊ £äxÊ >VÊ £{Ê £x]äääÊ 7iÃÌÀÊ °Ó{xÊ Óxä¿Ê xä¿
GTO15WES-02 Hi-Flex 105 White 14 15,000 Westrim .245 250' 50'
GTO15WES-10 Hi-Flex 105 Gray 14 15,000 Westrim .245 250' 50'
GTO15SLVX-01 -iiÛi8Ê £äxÊ >VÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
GTO15SLVX-02 -iiÛi8Ê £äxÊ 7
ÌiÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
GTO15SLVX-10 -iiÛi8Ê £äxÊ À>ÞÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
NOTE: (1)
ÊÃÊ>Û>>LiÊÊ >VÊ>`ÊÀ>Þ°ÊÊ
ÕÃÌÊVÀÃÊ>Û>>LiÊÜÌ
ʵÕ>ÌÌÞÊÀ`iÀðÊÊÊ(2) Also available in 100' reels.
,
Ê
"**
,Ê7,
ÊUÊ/
Ê7,
ÓÓ ,
£ÉÓÓ ,
ÊÃ`ÊLÞÊÌ
iÊ«Õ`]Ê£Ó ,
xääÊLÞÊÌ
iÊvÌ°Ê£Êëʰ
Catalog Wire Gauge Put
Number Description AWG Up
22BARE-1 -vÌÊ >ÀiÊ-`Ê
««iÀÊ7ÀiÊ ÓÓÊ £ÊL°Ê-«
22BARE-9 -vÌÊ >ÀiÊ-`Ê
««iÀÊ7ÀiÊ ÓÓÊ ÊL°Ê-«
12BARE-500 -`Ê
««iÀÊ `Ê7ÀiÊ £ÓÊ xää¿Ê-«
," Ê-ÊUÊ°¯Ê*1,
ÀÊÜÛÌ>}iÊyÕÀiÃViÌÊÌÕLiÃÊ>`ÊyÕÀiÃViÌÊ>«Ã°ÊÊiÀVÕÀÞÊÀiµÕÀi`°ÊÊ ÌÊÀiVi`i`Ê
for outdoor use.
Catalog Volume Container Voltarc 2.6 Liter .8/1.25 Liter
Number Description (Liters) Type Mfg.
>ÃÃÊ>Ã >ÃÃÊ>Ã
EGL-ARGON Argon 1.25 Glass EGL
VOL-ARGON Argon 0.8 Glass Voltarc
VOL-ARGON-2.6 À}Ê Ó°ÈÊ >ÃÃÊ 6Ì>ÀV
EGL-ARGON-25 Argon 25 Disposable Tank EGL
TRA-93999 Argon 100 Tank Transco
1
Ê-ÊUÊ°¯Ê*1,
For warmer climates. Used in clear or fluorescent-coated tubing with added mercury.
Catalog Volume Container
Number Description (Liters) Type Mfg.
EGL-BLUE ÕiÊ £°ÓxÊ >ÃÃÊ
VOL-1050 ÕiÊ ä°nÊ >ÃÃÊ 6Ì>ÀV
EGL-BLUE-2.6 ÕiÊ Ó°ÈxÊ >ÃÃÊ
VOL-1050-2.6 ÕiÊ Ó°ÈÊ >ÃÃÊ 6Ì>ÀV
EGL-BLUE-25 ÕiÊ ÓxÊ Ã«Ã>LiÊ/>Ê
"Ê7
/
,Ê-ÊUÊ°¯Ê*1,
iÃÌÊvÀÊ>ÊÜi>Ì
iÀÊ>««V>ÌÃ]ÊvÀÊÃÕLâiÀÊÌÊÌÀ«V>ÊÀi}ðÊÊ/
iÊ
}
iÀÊ«iÀViÌ>}iÊ
vÊ iÊ «ÀÛ`iÃÊ Ì
iÊ
i>ÌÊ iViÃÃ>ÀÞÊ ÌÊ V«iÌiÞÊ Û>«ÀâiÊ iÀVÕÀÞÊ Õ`iÀÊ V`Ê Üi>Ì
iÀÊ
V`ÌðÊÊiÀVÕÀÞÊÀiµÕÀi`° EGL 25 Liter EGL 2.65 Liter
Metal Tank >ÃÃÊ>Ã
Catalog Volume Container
Number Description (Liters) Type Mfg.
EGL-K4 ÕiÊ £°ÓxÊ >ÃÃÊ
VOL-1051 ÕiÊ ä°nÊ >ÃÃÊ 6Ì>ÀV
EGL-K4-2.6 ÕiÊ Ó°ÈxÊ >ÃÃÊ
VOL-1051-2.6 ÕiÊ Ó°ÈÊ >ÃÃÊ 6Ì>ÀV
1\Ê For clear glass tubes, giving a pale flesh-pink color or
EGL-K4-25 ÕiÊ ÓxÊ Ã«Ã>LiÊ/>Ê
Ü
iÊÕÃ}ÊÛV>Ìi`ÊÌÕL}]Ê>ÊÜ>ÀÊ}`ÊÌi°ÊÊÕÃÌÊLiÊ
ÕÃi`Ê>ÌÊ>ÊÜiÀÊ«ÀiÃÃÕÀiÊÌ
>ÊÀ>Ê{ÈÊÌÞ«V>Þ®°
-*
/9Ê-ÊUÊ°¯Ê*1,
,9*/" \ÊÊÊV>Ìi`Ê}>ÃÃ]ÊÀÞ«ÌÊÀ®Ê
>ÃÊÕV
ÊÌ
iÊÃ>iÊ
ivviVÌÊ>ÃÊÀ}°ÊÊÊVi>ÀÊ}>ÃÃ]ÊÌ
iÊVÀÊVÕ`ÊLiÊLiÃÌÊ`iÃVÀLi`Ê
Catalog Volume Container as pale platinum. Should not be filled to pressures higher than
Number Description (Liters) Type Mfg. 12mm because of the tendency to develop linear discharge.
VOL-HELIUM Helium 0.8 Glass Voltarc
VOL-HELIUM-2.6 iÕÊ Ó°ÈÊ >ÃÃÊ 6Ì>ÀV
8
" \ÊÊ8iÊ8i®ÊÃÊÃ>ÀÊÌÊÀÞ«ÌÊÊVÀ]ÊLÕÌÊ«ÀV«>ÞÊ
EGL-HELIUM-25 Helium 25 Disposable Tank EGL used in special effects for liner discharge or for high-pressure flash
EGL-KRYPTON ÀÞ«ÌÊ £°ÓxÊ >ÃÃÊ
tubes. This is a relatively high-resistance gas.
EGL-XENON Xenon 1.25 Glass EGL
Sign Supplies
Tecnolux 12 liter aluminum gas cylinders are fully compatible with Eurocom and other European
gas transfer systems at an economical price. Cylinders are disposable and require no deposit.
A wide variety of gasses are available.
Townsend 8 liter gas cylinders fit all gas transfer systems on Townsend manifolds only.
Catalog Volume Container
Number Description (Liters) Type Mfg.
TEC-NEON-12 Neon 12 Disposable Tank Tecnolux
TEC-ARGON-12 Argon 12 Disposable Tank Tecnolux
TEC-H-12 H Gas (1) 12 Disposable Tank Tecnolux
TEC-80/20-12 nä¯ÊÀ}ÉÓä¯Ê iÊ £ÓÊ Ã«Ã>LiÊ/>Ê /iVÕÝ
TOW-NEON-8 Neon 8 Cylinder Townsend
TOW-BLUE-8 À}É iÊÝÊ nÊ
Þ`iÀÊ /ÜÃi`
NOTE: (1) Çx¯Ê iÉÓx¯ÊÀ}]ÊV`ÊÜi>Ì
iÀÊÝ°
Tecnolux Gas Cylinders
-Ê/, -
,Ê-9-/
-
Ê>ÃÃiL}Ê>ÊÌÌ>ÞÊÌi}À>Ìi`ÊiÊv>LÀV>ÌÊv>VÌÞ]Ê>Ê}>ÃÊÌÀ>ÃviÀÊÃÞÃÌiÊÃÊ>ÊiÞÊiiiÌ°ÊÊ-«ÞÊi>Ì}ÊÃÞÃÌiÊÃ
ÕÌ`ÜÃÊvÀÊy>ÃÊÀi«>ViiÌÃÊÜÊ
justify investing in a system. Gas bottled in cylinders maintains its highest purity. Liter for liter, costs are reduced by purchasing gas in bulk. Since the tanks are capable
vÊLi}Êwi`ÊÌÊ>ÊÕV
Ê
}
iÀÊ«ÀiÃÃÕÀiÊÌ
>Ê}>ÃÃÊy>ÃÃ]Ê£ää¯ÊvÊÌ
iÊ}>ÃÊÛÕiÊÜÊLiÊÕÃi`ÊÀ>Ì
iÀÊÌ
>Ê>««ÀÝ>ÌiÞÊnä¯ÊÜ
iÊÕÌâ}Ê}>ÃÃÊy>ÃðÊÊ"ViÊ>Ê
system is installed, no gas losses are incurred when changing glass flasks with small, immeasurable volumes of remaining gases. No labor charges are incurred for the
time taken to change replacement flasks. For example, one 25 liter cylinder will eliminate 25 bottle changes. A system can hold 100% of its gases indefinitely, unlike
glass stopcocks which cannot prevent seepage for long periods of time.
TRANSCO SYSTEM: Ê/
iÊ
i>ÀÌÊvÊÌ
iÊ/À>ÃVÊ}>ÃÊÌÀ>ÃviÀÊÃÞÃÌi]Ê/,È{xÇÊÃÊÌ
iÊ`iÊ*/ÊÌÜÃÌ>}iÊVÞ`iÀÊÀi}Õ>ÌÀ°ÊÊ/
iÃiÊ
}
Ê«ÕÀÌÞÊÓÃÌ>}iÊ
regulators are recommended for noncorrosive pure gases and mixtures in applications where constant delivery pressures regardless of fluctuations in tank pressure is
required. The materials of construction will not contaminate the gas stream and the regulators are highly resistant to inboard diffusion of atmospheric contaminants.
A diffusion resistant diaphragm valve is installed in the outlet. These regulators are recommended for the control of high purity carrier gases and are able to withstand
vacuums generated during purging operations. The regulator connects to the manifold system via a 30" stainless steel flex bellows hose, glass adaptor flange, centering
"À}Ê>`ÊV>«°ÊÊ/
ÃÊÃÞÃÌiÊV>ÊLiÊ«ÕÀV
>Ãi`ÊÌÊLiÊÕÃi`ÊÜÌ
Ê
ÊÓxÊÌiÀÊ}>ÃÊÌ>ÃÊ
Êx{ä®ÊÀÊ/À>ÃVÊ£ääÊÌiÀÊ}>ÃÊÌ>ÃÊ
Êxnä®°ÊÊ*i>ÃiÊëiVvÞÊ>ÌÊÌiÊ
of ordering.
EGL SYSTEM: The installation and use of the EGL custom-made gas transfer system provides uninterrupted flow of pure gasses. This system employs a precision-
made filling valve which eliminates the use of two glass stopcocks and is virtually maintenance-free. Clean gas flow is guaranteed as compared to the old double-stopcock
system which requires constant lubrication and occasionally invites leakage of air into the glass flasks. No entrapped grease vapors are automatically pushed into the
iÊÌÕLiÃÊÜ
iÊ}>ÃÃÊÃÌ«VVÃÊ>ÀiÊÕÃi`°ÊÊ>`iÊÜÌ
ÊÃÌ>iÃÃÊÃÌiiÊ
>À`Ü>ÀiÊ>`ÊÌÕL}°
TECNOLUX SYSTEM: Ê/
iÊ/
£äÓÊÃÊ>ÊiVV>Ê>`Êi>ÃÞÊÌÊÕÃiÊÌÀ>ÃviÀÊÃÞÃÌiÊvÀÊ£ÓÊÌiÀÊVÞ`iÀðÊÊÌÃÊ>`>«ÌiÀÊÃVÀiÜÃÊÌÊÌ
iÊVÞ`iÀÊ>`ÊwÌÃÊ
ÌÊÌ
iÊV«ÀiÃÃÊwÌÌ}Ê>`>«ÌiÀ]Ê/
ä£]Ê>ÊÌÜÃ`i`Ê}>ÃÃÊ>`ÊÀ}ÊV«ÀiÃÃÊwÌÌ}ÊÀÊV>Ê>ÃÊLiÊ>ÌÌ>V
i`ÊÌÊÈÊÌÕL}ÊÊ>v`ÊÕÃ}ÊÃÕ««i`Ê
6ÌÊÌÕL}°ÊÊ
>V
ÊÕÌÊÃÊ
iÕÊi>ÊÌiÃÌi`°ÊÊ
Þ`iÀÊV>«Ê>`ÊÕÌ}Ê
>À`Ü>ÀiÊVÕ`i`°ÊÊ`i>ÊvÀÊ>}ÊViVÌÃÊLiÌÜiiÊ}>ÃÊÌÀ>ÃviÀÊÃÞÃÌiÊ iÜÃÊ
Ãi]Ê>v`Ê>`ÉÀÊiÊÕÌðÊÊ/
£ÓÊÃÊ>Ê£Ó¸Ê*/
Ê/iyÊ iÜÃÊ
ÃiÊÜ
V
ÊÃÊ`i>ÊvÀÊ>}ÊyiÝLiÊViVÌÃÊLiÌÜiiÊ>v`Ê>`Ê}>ÃÊÌÀ>ÃviÀÊ
system or between manifold and neon units. Can be used anywhere a small, flexible, high-vacuum connection is needed. TEC-CFC is a Teflon compression fitting cap
which eliminates the risks of melting compression fitting caps when tipping off from bellows hose or manifold. CFC caps are rated for 500°F continuous use and make
ideal fittings for attaching neon units to compression fittings.
Catalog
Number Description Mfg.
TRA-96457 ¸*/¸Ê,i}Õ>ÌÀÊÌÊvÀÊ£Ê/>Ê /À>ÃV
EGL-GTS Gas Transfer System for 1 Tank EGL
TEC-GA102 >ÃÊiÌiÀ}Ê6>ÛiÊ>ÃÃiLÞÊÜÉÊÕÌ}Ê
>«ÊvÀÊ£Ê/>Ê /iVÕÝ
/
ä£ Compression Fitting Adapter Tecnolux
TEC-BH-12 £Ó¸Ê iÜÃÊÃi]Ê/iyÊ /iVÕÝ
/
Teflon Compression Fitting Cap Tecnolux
TEC-GA102 TRA-96457
EGL-GTS
-
ÜÊ>ÌÌ>V
i`ÊÌÊ>Ê
ÊÓxÊÌiÀÊÌ>
(sold separately)
i>ÀÊi>`Ê}>ÃÃÊÌÕL}ÊÃÊ«ÀiÃÌÀ>}
Ìii`Ê>`Ê>i>i`°ÊÊ/ÌiÊ*>VÊÃÊÃ`ÊÊ
bulk packaging (one pack minimum order). Heavy wall glass is normally used as
follows; 15HW for sleeving GTO cable, 19HW for sleeving 12mm electrodes and
24HW for sleeving 15mm electrodes. Sold by the pound in 4' lengths.
Catalog Size Weight/Case
Number O.D. ft./lb. (Lbs.)
CLR-5 5mm 37 50
CLR-6 ÈÊ ÓxÊ xä
CLR-7 7mm 19 50
CLR-8 8mm 18 50
CLR-9 Ê £ÈÊ xä
CLR-10 10mm 14 50
CLR-12 12mm 11 50
CLR-13 13mm 10 50
CLR-15 15mm 9 50
CLR-18 18mm 7 40
CLR-20 ÓäÊ ÈÊ Îx
CLR-25 25mm 5 30
CLR-9-TOTE ÊÊ/ÌiÊ*>VÊ £ÈÊ £ÓxäÊ««ÀÝ°
CLR-10-TOTE £äÊÊ/ÌiÊ*>VÊ £Ê ££xäÊ««ÀÝ°
CLR-12-TOTE £ÓÊÊ/ÌiÊ*>VÊ ££Ê £äääÊ««ÀÝ°
CLR-13-TOTE £ÎÊÊ/ÌiÊ*>VÊ £äÊ £ÎxäÊ««ÀÝ°
CLR-15-TOTE £xÊÊ/ÌiÊ*>VÊ Ê ££xäÊ««ÀÝ°
CLR-15HW 15mm Heavy Wall 4 50
CLR-19HW 19mm Heavy Wall 4 40
CLR-24HW 24mm Heavy Wall 3 30
,Ê
,
Ê--Ê/1
Lead-free glass tubing is a new alternative to lead glass tubing. Works easily by itself
and splices well with lead glass tubing. Sold by the pound in 59" (5') lengths.
Tec-Tube is a lead-free tubulation glass with a wider O.D. (5.75mm) than typical
tubulation glass. Available in 4.37" lengths with fire polished ends. Sold by the
«Õ`°ÊÊÓ{ÈäÊ«iViÃÊ«iÀÊLÝ°
Catalog Size Weight/Case
Number O.D. ft./lb. (Lbs.)
Ê /
,£äÊ 10mm 15.93 50
Ê /
,£ÓÊ 12mm 12.98 50
Ê /
,£ÎÊ 13mm 12 50
Ê /
,£xÊ 15mm 10.23 50
TEC-TUBE 5.75mm - 28
Sign Supplies
Voltarc Technologies proprietary Color Guard™ process insures uniform coating thickness along the length of the tube as well as batch-to-batch color consistency. Exacting
quality control checks in each phase of production guarantees quality and reliability for which Voltarc has been renowned.
Single coated (standard) lead glass tubing is available in a wide range of colors. Double coated tubing was originated to provide the richest, deepest shades of color
LÌ>>Li°ÊÊÌÊÃÊLiÃÌÊÕÃi`ÊvÀÊLÀ`iÀÃÊ>`ÊÃÜii«}ÊVÕÀÛiÃÊÜ
iÀiÊÌ
iÊLÀ>ViÊvÊVÀÊV>ÊVÀi>ÌiÊ>Ê>ÌÌiÌÊ}iÌÌ}Ê>`Ê`Þ>VÊVÌÀ>ÃÌÊÜÌ
ÊÌ
iÀÊÃ}ÊiiiÌðÊÊ
Tight bends are not recommended because bends can cause the coating to "thin-out" at these points.
Catalog Color Color Color VViÌÊ /À*
ë
ÀÊ ÃiÀiÃÊ V>Ìi`Ê ÌÕL}Ê «ÀÛ`iÃÊ
}
Ê ÕiÊ
Number Name w/Argon/Mercury w/Neon output with superior lumen maintenance and color rendering.
VViÌÊ/À*
ë
ÀÊ7
ÌiÃ
Accent incandescent provides the warmest golden color that
VOL-INCAN-* VViÌÊV>`iÃViÌÊ Ó{ää0ÊÊÊÊ
,\ÊÇÈ°xÊ * (1) lighting designers and specifiers are looking for. Accent Vanilla
VOL-AV-* Accent Vanilla 28000ÊÊÊÊ
,\Ên{Ê * (1) achieves custom architectural cold cathode light with a previously
VOL-A30-* Accent 30 30000ÊÊÊÊ
,\Ên{Ê * (1) unattainable, soft "incandescent look" and superior color rendering
VOL-A35-* Accent 35 35000ÊÊÊÊ
,\ÊnxÊ * (1) by comparison to ordinary cold cathode or fluorescent tubes. Accent
VOL-SL65-* -Ì>ÀÌiÊ/ÀÈxääÊ Èxää0ÊÊÊÊ
,\Ên{Ê * (1)
30 is the ultimate warm white for sign and lighting applications.
(1)
VOL-ARWH-* Artic White 8300 83000ÊÊÊÊ
,\Ênx°xÊ * Truly a warm, long lasting tri-phosphor blend. Accent 35 is a
Whites perfect mid-range warm white specially formulated to achieve
VOL-8300-* nÎääÊ À}
ÌÊ7
ÌiÊ À}
ÌiÃÌÊ ÕiÃÌÊ7
ÌiÊ À}
ÌÊ/>}iÀi >ÊVÀÊÜÌ
ÊÕÃÌÊÌ
iÊÀ}
ÌÊ-ÊvÊVÀÊÀi`iÀ}ÊLÀ}
ÌiÃÃÊ>`Ê
VOL-6500-* ÈxääÊ-ÜÊ7
ÌiÊ -ÜÊ7
ÌiÊ />}iÀi Ü>ÀÌ
°ÊÊ-Ì>À}
ÌÊ/,ÈxääÊÜ>ÃÊ`iÃ}i`ÊÜÌ
Ê>ÊÈxää0 iÛÊ
VOL-4500-* 4500 White Cool White Tangerine temperature that has become the standard of high performance
VOL-3500-* 3500 White Warm Tone Tangerine illumination phosphors. Arctic White 8300 is the bluest of the tri-
VOL-3000-* 3000 White Warm White Tangerine «
ë
ÀÊÜ
ÌiðÊÊ*iÀviVÌÊvÀÊÃ}Ê>`ÊV
>iÊiÌÌiÀÊÕ>ÌÊ
VOL-PINK-* *Ê7
ÌiÊ *Ê7
ÌiÊ *>iÊ"À>}i (1) when the intention is to accent bright blue white light. 8' lengths
Standard Colors also available in 18, 20 and 25mm diameters.
VOL-GREEN-* Green Green Amber
VOL-AQUA-* µÕ>>ÀiÊ ,V
Ê ÕiÊÀiiÊ ii«Ê*i>V
Sold by the pound in 4' lengths.
VOL-TURQ-* /ÕÀµÕÃiÊ /ÕÀµÕÃiÊ *i>V
VOL-LAVNDR* >Ûi`iÀÊ >Ûi`iÀÊ >`>ÀÊ"À>}i
VOL-PURP-* *ÕÀ«iÊ *ÕÀ«iÊ >}iÌ> (1)
(1)
VOL-MCROSE* iÀVÕÀÞÊ,ÃiÊ À}
ÌÊ,ÃiÊ
VOL-BLUE-* ÕiÊ ÕiÊ ,Ãi
VOL-TEAL-* /i>Ê /i>Ê }
ÌÊ*i>V
VOL-ULTBL-* (4) 1ÌÀ>Ê ÕiÊ À}
ÌÊ ÕiÊ À}
ÌÊ,Ãi
VOL-SPKBL-* -«>À}Ê ÕiÊ À}
ÌiÃÌÊ Õi (5) Soft Rose
VOL-PP-* *>À>`ÃiÊ*Ê *Ê * (1)
(4)
Double Coated Colors
VOL-NEOBL-* iÊ ÕiÊ ii«Ê ÕiÊ >ÕÛi
VOL-NEORBY-* Neo Ruby Violet Ruby
VOL-CLGD2-*
i>ÀÊ`ÊÊ `Ê LiÀ
VOL-VEPGRN* Veep Green Lime Green Yellow-Orange
VOL-CLBRYL*
i>ÀÊ ÀÌiÊ9iÜÊ À}
ÌÊ9iÜÊ À}
ÌÊ"À>}i
(1)
Ê 6"IÊ >iÃÌVÊ`Ê
}}Ê9Ê9iÜÊ
(1)
Ê 6"",IÊ >iÃÌVÊ"À>}iÊ ,V
Ê
ÌÀÕÃÊ"À>}iÊ
Specialty
VOL-BLKBL-15 (2) >V}
ÌÊ ÕiÊ >V}
ÌÊ ÕiÊ
VOL-SDI-* (3) -Ê ,i«À}À>«
VÊ ÕiÊ (1)
Ordering Information
VOL-H5100-* x£ääÊ iÃ}Ê7
ÌiÊ />}iÀi
VOL-RDRD-* (3) Red Red Red Red Items with "*" suffix indicates O.D., substitute mm size desired.
NOTE: (1)
Not recommended (2) Available in 15mm only, sold by the stick (3)
Limited availability Most colors available in 8mm to 25mm diameter.
(4)
Tight bends are not recommended (5) Resists mercury staining
ÀÃÊÌÞ«V>ÞÊÃÌVi`ÊÊ£ä]Ê£Ó]Ê£ÎÊ>`Ê£xÊ`>iÌiÀ°
7
ÌiÃÊ>ÀiÊÃÌi`ÊÊÀ`iÀÊvÀÊViÃÌÊLÕÃ
®ÊÌÊÜ>ÀiÃÌÊ«Ã
®ÊÜ
iÊÕÃ}Ê>À}ÉiÀVÕÀÞ° -iÊVÀÃÊÃÌVi`ÊÊn]ÊÊ>`Ê£nÊ`>iÌiÀ°
Whites are listed in order from brightest orange to palest orange when using neon.
6"/,
Ê*
ÊEÊ""/
Ê
,/
Diameter
5mm 8mm 9mm 10mm 11mm 12mm 13mm 15mm 18mm 20mm 25mm
Ê iiÌÊ*iÀÊ*Õ` Ê £n°ÓÊ £ÈÊ £{°ÓÊ £Ó°ÓÊ ££°ÎÊ £ä°xÊ n°xÊ Ç°ÎÊ È°ÎÊ {°n
Ê *Õ`ÃÊ*iÀÊ
>Ãi 25 25 25 25 25 25 25 25 20 19 15
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
A-22
EGL COATED GLASS SIGN TUBING
Sign Supplies
EGL's proprietary phosphor coatings dramatically improve adhesion, uniformity, brightness and color stability. This coating virtually eliminates flaking, color wash-out
and darkening of bends and splices even in shades of blue. All tubing is individually straightened, fire-polished, washed and dried using EGL's special Sani-Dry™ process
ÌÊi>ÌiÊÀiÃ`ÕiÊVÌ>>Ì°ÊÊÌÊÃÊÌ
iÊV>Ìi`]ÊL>i`Ê>`Ê>i>i`]ÊÀi`ÕV}Ê}>ÃÃÊÃÌÀiÃÃÊ>`ÊÃÌÀ>°
Single coated (standard) lead glass tubing is available in a wide range of colors. Double coated tubing was originated to provide the richest, deepest shades of color
LÌ>>Li°ÊÊÌÊÃÊLiÃÌÊÕÃi`ÊvÀÊLÀ`iÀÃÊ>`ÊÃÜii«}ÊVÕÀÛiÃÊÜ
iÀiÊÌ
iÊLÀ>ViÊvÊVÀÊV>ÊVÀi>ÌiÊ>Ê>ÌÌiÌÊ}iÌÌ}Ê>`Ê`Þ>VÊVÌÀ>ÃÌÊÜÌ
ÊÌ
iÀÊÃ}ÊiiiÌðÊÊ
Tight bends are not recommended for double coated tubing because tight bends can cause the coating to "thin-out" at these points.
°°ÊiÃ}iÀÊ-iÀiÃÊV>Ìi`ÊÌÕL}ÊÃÊ>Ê}>ÃÃÊÌÕL}ÊvÀÊiÊv>LÀV>ÌÊëiVwV>ÞÊ`iÃ}i`ÊÌÊ«À`ÕViÊÃÕ«iÀÀÊÕ>ÌÊÊV
>iÊiÌÌiÀðÊÊ Ài>Ì
ÀÕ}
ÊÀiÃi>ÀV
Ê
in phosphor development has revealed "rare-earth" chemicals. This discovery led to the creation of phosphor coatings which emit extremely narrow bands of light. EGL
has combined rare-earth technology with experience formulating high-performance phosphor coatings. The result is a new generation of exotic neon colors simply called
Rare-earths and a line of high-output whites called C.L. Designer Series. C.L. Designer and Rare-earth tubing deliver unprecedented intensity and durability. They provide
Ì
iÊ«iÀviVÌÊ}
ÌÊÃÕÀViÊvÀÊV
>iÊiÌÌiÀÊÕ>ÌÊÜ
iÀiÊ«>ÃÌVÊv>ViÃÊV>ÊÀi`ÕViÊÌ
iÊ}
ÌÊÕÌ«ÕÌÊvÊÃÌ>`>À`ÊÌÕL}ÊLÞÊ>ÃÊÕV
Ê>ÃÊÈ䯰ÊÊ iÊ>`ÊV`ÊV>Ì
`iÊ
tubes made with C.L. Designer and Rare-earth tubing resist staining and output depreciation over the long-term as well as exhibit exceptional color stability.
Sold by the pound in 4' lengths.
Catalog Color Color Color
Number Name w/Argon/Mercury w/Neon
}
Ê"ÕÌ«ÕÌÊ/À*
ë
ÀÊ7
ÌiÃ
EGL-CL24-* C.L. Designer 24
EGL-CL28-* C.L. Designer 28 Ordering Information
EGL-CL30-* C.L. Designer 30 Items with "*" suffix indicates O.D., substitute mm size desired.
EGL-CL35-* C.L. Designer 35 *À`ÕViÃÊVÀÃÊÊÀ`iÀÊ
EGL-CL41-* C.L. Designer 41 from warmest (pinkish) Most colors available in 7mm to 18mm diameter.
EGL-CL45-* C.L. Designer 45 to coolest (bluish).
EGL-CL65-*
°°ÊiÃ}iÀÊÈx
ÀÃÊÌÞ«V>ÞÊÃÌVi`ÊÊ£ä]Ê£Ó]Ê£ÎÊ>`Ê£xÊ`>iÌiÀ°
EGL-CL71-* C.L. Designer 71
EGL-CL83-* C.L. Designer 83
Whites
EGL-6500H-* ÈxääÊ"Ê ÊÊÊÊÊÊÊÊÊÊÊÊ
EGL-6500-* ÈxääÊ-ÜÊ7
ÌiÊ ÊÊÊÊÊÊÊÊÊÊÊÊÊ
*À`ÕViÃÊVÀÃÊÊÀ`iÀÊ *À`ÕViÃÊVÀÃÊÊ
EGL-4500-* 4500 White from coolest (bluish) to varying shades of pink.
EGL-V4500-* V4500 White
EGL-3500-* 3500 White warmest (pinkish).
EGL-E3000-* Warm White
EGL-H37-* *Ê ÊÊÊÊÊÊÊÊÊÊÊÊÊÊ
Standard Colors
EGL-GREEN-* Green Green Amber
EGL-E20-*
ÓäÊ/ÕÀµÕÃiÊ ÕÃ
Ê/ÕÀµÕÃiÊ *i>V
Ê*
EGL-AQUA-*
ӣʵÕ>Ê /ÕÀµÕÃiÊ *i>V
EGL-E12-*
£ÓÊ/ÕÀµÕÃiÊ ÀiiÃ
Ê/ÕÀµÕÃiÊ *i>V
EGL-SECRS-* -i>VÀiÃÌÊ ->ÌÕÀ>Ìi`Ê ÕÃ
ÊÀiiÊ ->ÌÕÀ>Ìi`Ê"À>}i
EGL-AZURE-* âÕÀiÊ ->ÌÕÀ>Ìi`ÊÀiiÃ
Ê ÕiÊ ->ÌÕÀ>Ìi`Ê"À>}i
EGL-VIOLET* 6iÌÊÊ(5)Ê ÕÃ
Ê*ÕÀ«iÊ ÌÊ* (1)
EGL-PURP-* *ÕÀ«iÊ *ÕÀ«iÊ ÌÊ* (1)
EGL-CORPK-*
À>Ê*Ê *Ê ,Ãi
Ê
"IÊ >}Ê ->ÌÕÀ>Ìi`Ê>}iÌ>Ê ->ÌÕÀ>Ìi`Ê"À>}i
EGL-BLUE-* ÕiÊ ÕiÊ ,Ãi
EGL-HORBL-* ÀâÊ ÕiÊ 6LÀ>ÌÊ Õi (2) Rose (1)
EGL-TRGRN-* Tropic Green Vivid Green Orange
Double Coated Colors (4)
EGL-NEOBL-* iÊ ÕiÊÊ ii«Ê ÕiÊ >ÕÛi
EGL-CLGD3-*
i>ÀÊ`ÊÊ `iÊ9iÜÊ />}iÀi
NOTE: (1)
Not recommended (2) Resists darkening (3)ÊÊ/À*
ë
ÀÊVÀ
(4)
Tight bends are not recommended (5)Ê>ÌV
iÃÊ6Ì>ÀVÊ*ÕÀ«i°
Ê*
ÊEÊ""/
Ê
,/
Diameter
8mm 9mm 10mm 11mm 12mm 13mm 15mm 18mm
Ê ÛiÀ>}iÊiiÌÊ*iÀÊ*Õ`Ê £nÊ £ÈÊ £ÎÊ £ÓÊ ££Ê £äÊ n°xÊ Ç°£
Ê *Õ`ÃÊ*iÀÊ
>ÃiÊ ÓxÊ ÓxÊ ÓxÊ ÓxÊ ÓxÊ ÓxÊ ÓxÊ Óä
Sign Supplies
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÊ>Ê>ÕÌ
Àâi`Ê`ÃÌÀLÕÌÀÊvÀÊ/iVÕÝÊ1ÌÀ>Ê
i>ÒÊV>Ìi`Ê
ÌÕL}°ÊÊ>`iÊÜÌ
Êi>`vÀiiÊ}>ÃðÊÊ-`ÊLÞÊÌ
iÊ«Õ`ÊÊx¸Êx¿®Êi}Ì
ðÊÊ-ÌVi`Ê
ÊÌi`ÊÃâiÃÊ>`ÊÊÛLÀ>ÌÊVÀÃÊÃÕV
Ê>Ã\
-ʸ ,/
¸Ê
"/
Ê--Ê- Ê/1
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÊ>Ê>ÕÌ
Àâi`Ê`ÃÌÀLÕÌÀÊvÀÊ ÀÌiÊÌÕL}°
Selected colors stocked, other colors available upon request.
iÊÃ}ÃÊ>`iÊÜÌ
Ê/iVÕÝÊVÀi`Ê}>ÃÃÊÌÕL}Ê>iÊ>Ê«ÜiÀvÕÊ«>VÌ°ÊÊ>`iÊÊ6iVi]ÊÌ>Þ]ÊÌ
iʫ
ë
ÀÃÊÕÃi`ÊÊV>Ìi`ÊÛiÀÃÃÊVÃÃÌÊvÊÌ
iÊ
}
iÃÌÊ
quality blends and in certain cases, "rare earth" phosphors. Each tube of coated glass is individually sealed to preserve the purity of the phosphors. State-of-the-art
equipment creates a uniformity in color and dimensions that cannot be achieved by manual production. Tube ends are fire-polished. Glass is sturdy but pliable under
heating conditions and specially prepared to reduce stress and breakage. Sold by the 59" (5') stick.
Catalog Color
Number Color Number Note Ordering Information
TEC-RR-C-* Ruby Red Neon, Coated 118 1 Items with "*" suffix indicates O.D.,
TEC-RA-* Ruby Red Argon, Coated 18 2 substitute mm size desired.
TEC-RR-UC-* Ruby Red, Un-Coated 118U
TEC-NG-C-* Novial Gold, Coated 17 Available in 6mm to 25mm diameter.
TEC-NG117-* Gold, Coated 117
ÀÃÊÌÞ«V>ÞÊÃÌVi`ÊÊÈÊÌ
ÀÕ}
TEC-LY-* Lemon Yellow, Coated 32 15mm diameters.
TEC-NG-UC-* Novial Gold, Un-Coated 17U
TEC-CB-C-*
L>ÌÊ Õi]Ê
>Ìi`Ê £ÈÊ
TEC-CB-UC-*
L>ÌÊ Õi]Ê1
>Ìi`Ê £È1
TEC-PUR-C-* *ÕÀ«i]Ê
>Ìi`Ê ÓÓÊ 3 /
"18Ê*
]Ê""/
ÊEÊ7
/-Ê
TEC-EG-C-* Emerald Green, Coated 35
TEC-EG-UC-* Emerald Green, Un-Coated 35U Ê >iÌiÀÊÊ ««ÀÝ°ÊÊ7Ì°Ê 7>Ê/
ViÃÃÊ iiÌÊ*iÀÊ /ÕLiÃÊ*iÀ
(mm) (Lbs.) (mm) Pound Box
TEC-CO-C-*
ÌÀÕÃÊ"À>}i]Ê
>Ìi`Ê ÓÈ
TEC-CO-UC-*
ÌÀÕÃÊ"À>}i]Ê1
>Ìi`Ê ÓÈ1 20 ä°È{äÊ £°ÓxÊ Ç°ÈäÊ £Ç
TEC-AM-C-* Aquamarine, Coated 38 18 0.572 1.25 8.50 19
TEC-AM-UC-* Aquamarine, Un-Coated 38U 15 0.470 1.25 10.73 24
13 0.401 1.25 11.00 28
TEC-LG-C-* Lite Green, Coated 20
12 ä°ÎÈÇÊ £°ÓxÊ £Î°{£Ê Îä
TEC-LG-UC-* Lite Green, Un-Coated 20U
10 ä°ÓÊ £°ÓxÊ £È°x{Ê ÎÇ
TEC-BLKBL-* >V}
ÌÊ Õi]Ê
>Ìi`Ê £Ê 4 9 ä°ÓÈxÊ £°ÓxÊ £°äÊ {Ó
NOTE:( 1)
Should be used with Neon Gas. (2)
Ê-
Õ`ÊLiÊÕÃi`ÊÜÌ
ÊÀ}ÉiÀVÕÀÞ° 8 ä°ÓÎ£Ê £°ÓxÊ Ó£°{ÈÊ {n
(3) (4) È ä°£ÎÇÊ £°ääÊ ÎÈ°Ó£Ê n£
Ê
L>ÌÊ ÕiÊ}>ÃÃÊV>Ìi`Ê*ÕÀ«i° Also available un-coated.
17Ê*
ÊEÊ""/
Ê
,/
AW-AM-C-* Aquamarine, Coated
AW-AM-UC-* Aquamarine, Uncoated Diameter
10mm 12mm 15mm
NOTE: (1)
Novial Gold glass coated Apple Green.
(2)
Ê ÀÊ ÕiÊ}>ÃÃÊV>Ìi`Ê*ÕÀ«i° Ê ÛiÀ>}iÊiiÌÊ*iÀÊ*Õ`Ê £ÈÊ £{Ê £ä
(3)
No longer available uncoated.
(4)
Orange glass coated Tangerine.
INTERSTATE ELECTRIC CO., INC.
9ATES !VE #OMMERCE #! s 0ROCYON ,AS 6EGAS .6 s 'OODYEAR 2D "ENICIA #!
A-25
EGL 8' COLD CATHODE LAMP TUBING
Sign Supplies
Large diameter glass available in 18, 20 and 25mm diameters,
8' in length. EGL manufactures cold cathode tubing in a variety
of colors from tri-phosphor whites to the classic colors they've
made for years. Custom color blending is available. Rush
orders are usually accepted and delivered in a timely manner.
Sold by the stick.
Shown are just a few colors typically requested by customers.
Other colors available upon request in case quantity.
Catalog Color Qty.
Number Name Per Case
EGL-2400-825 Ó{ääcÊ7
Ìi (1) 24
EGL-2800-825 ÓnääcÊ7
Ìi (1) 24
EGL-3KTC-825 ÎäääcÊ7
Ìi (1) 24
EGL-4100-825 {£ääcÊ7
Ìi (1) 24
EGL-65K-825 ÈxääcÊ7
Ìi (1) 24
EGL-WW-825 3000 Warm White 24
EGL-3500-825 3500 White 24
EGL-4500-825 4500 White 24
EGL-6500-825 ÈxääÊ-Ü
ÌiÊ Ó{
EGL-E40-825 ÕiÊ Ó{
EGL-HORBL825 ÀâÊ ÕiÊ Ó{
NOTE:............................................... (1)ÊÊ/À*
ë
ÀÊVÀ°
EGL-100S
EGL-100ST
HYD-500T HYD-3A
,"--, -
Sign Supplies
Crossfires listed are for natural gas. Artificial gas versions are available. Hyde crossfires are equipped with
a ball joint at the base of each tip for greater flame precision.
ÊvviÀÃÊÌÜÊÌÞ«iÃÊvÊV>ÊwÀiðÊÊ/
iÊ /ÇÊ«ÀÛ`iÃÊ>ÊviÃ
>«i`Êy>iÊ`i>ÊvÀÊëV}]ÊÜÌ
ÊÃÕvwViÌÊ
heat for bending glass 15mm or less. The S21 provides a broad high-heat flame hotter than 5 point crossfires
but more diffused, therefore better for bending than splicing. S21 is also available in an artificial gas version.
Hyde versions also available.
Catalog Gas
Number Description Type Mfg. Note
9
x Ê xÊ*ÌÊ
ÀÃÃwÀiÊ >ÌÕÀ>Ê Þ`iÊ £
Çä
Ê xÊ*ÌÊ
ÀÃÃwÀiÊ >ÌÕÀ>Ê
Ê Ó
9
Ç Ê ÇÊ*ÌÊ
ÀÃÃwÀiÊ >ÌÕÀ>Ê Þ`iÊ £
EGL-BMT-7
>ÊÀi]Êvi-
>«i`Ê>iÊ >ÌÕÀ>ÉÀÌwV>Ê
Ê Î
EGL-S21-N
>ÊÀi]Ê À>`Ê}
i>ÌÊ>iÊ >ÌÕÀ>Ê
Ê Î
9
/ Ê ,i«>ViiÌÊ ÕÀiÀÊ/«ÊvÀÊ>ÊÞ`iÊ >ÌÕÀ>Ê
ÀÃÃwÀiÃÊ >ÌÕÀ>Ê Þ`i
9
/Ê ,i«>ViiÌÊ ÕÀiÀÊ/«ÊvÀÊ>ÊÞ`iÊÀÌwV>Ê
ÀÃÃwÀiÃÊ ÀÌwV>Ê Þ`i
9
Ê ,i«>ViiÌÊ >ÊÌÊvÀÊ>ÊÞ`iÊ
ÀÃÃwÀiÃÊ Ê Þ`i
EGL-BMT7-TIP ,i«>ViiÌÊ ÕÀiÀÊ/«ÊvÀÊ
/ÇÊ
>ÊÀiÊ >ÌÕÀ>ÉÀÌwV>Ê
EGL-S21N-TIP ,i«>ViiÌÊ ÕÀiÀÊ/«ÊvÀÊ
-Ó£ Ê
>ÊÀiÊ >ÌÕÀ>Ê
NOTE: (1)
VÕ`iÃÊLÕÀiÀÃ]ÊÃ`iÊ««iÃÊ
*®]ÊÃ`}ÊL>ÃiÊ
- ®]Ê««iÊ>ÀÊV>ÃÌ}ÃÊ
Ó®Ê>`ÊÃ`}ÊLiV
ÊÕÌÊ
£®°
(2)
VÕ`iÃÊLÕÀiÀÃ]ÊÃ`iÊ««iÃ]ÊÃ`}ÊL>Ãi]Ê/ëÌÌiÀÊ>`ÊVÀÃÃwÀiÊÝiÀÊÜÌ
ÊÛ>Ûið 9
x
(3)
VÕ`iÃÊLÕÀiÀÃ]ÊÃ`iÊ««iÃ]ÊÃ`}ÊL>Ãi]Ê/ëÌÌiÀÊ>`Ê>««À«À>ÌiÊÝiÀÊÜÌ
ÊÛ>Ûið 9
Ç
S21N-TIP BMT7-TIP
EGL-BMT-7
EGL-S21
,"--,
Ê
"*"
/-
Catalog
Number Description
76Ê
ÀÃÃwÀiÊÝiÀÊÜÌ
Ê6>ÛiÃ
9
Ê
ÀÃÃwÀiÊÝiÀÊÜÌ
ÕÌÊ6>ÛiÃ
HYD-1288 £ÉÓ¸Ê ii`iÊ6>Ûi
HYD-101M ÝiÀÊvÀÊ"LÃiÌiÊ9£ä£Ê
>ÊÀi
76 HYD-1288 9
HYD-101M
,LLÊLÕÀiÀÃÊ>ÀiÊÕÌâi`ÊvÀÊVÀi>Ì}ÊÃÜii«}ÊVÕÀÛiÊivviVÌÃÊ>`ÊÃVÀ«ÌÌÞ«iÊ
lettering for neon signs. All models equipped with a control slide to adjust flame
length. Also available in artificial gas versions. Replacement screens, slides and
parts also available. Call for information.
Catalog Gas
«iÌiÊȸÊÀʣȸÊ,LLÊ ÕÀiÀ
Number Dimensions Type Mfg. Shown with economizer
and bench flange/pipe adapter
HYD-RB-06HN ȸÊ-«iV>ÌÞÊ,LLÊ ÕÀiÀÊi>`Ê >ÌÕÀ>Ê Þ`i mounted to floor stand
HYD-RB-16HN £È¸Ê,LLÊ ÕÀiÀÊi>`Ê >ÌÕÀ>Ê Þ`i
HYD-RB-24HN Ó{¸Ê,LLÊ ÕÀiÀÊi>`Ê >ÌÕÀ>Ê Þ`i
,Ê-*
/" -Ê",Ê
Ê
Ê
+1*
/ Hand Torches Using Natural Gas
3A .35 38 4.0 5.5
Chart below is for natural gas. All gas supplies and systems should be installed 500T .35 37 5.0 4
and checked by a licenced gas fitter for safety purposes. ÀÌwV>Ê>ÃÊ,LLÊ ÕÀiÀÃ
Burner CFH Gas CFH Air CFM Air Ê £È¸Ê Ó°äÊ £]££xÊ È°äÊ {n
Type Btu cubic ft./hr. cubic ft./hr. cubic ft./min. Ê Ó{¸Ê Ó°äÊ £]ÓääÊ È°äÊ xÓ
Sign Supplies
The impeller blades passing the inlet port draw air or other gases into the blower.
The impeller blades then by centrifugal action accelerate the air outward and
forward. Here the "regenerative" principle takes effect as the air is turned back
by the annular shaped housing to the base of the following blades where it is
again hurled outward. Each "regeneration" imparts more pressure to the air.
When the air reaches the stripper section at the outlet (the stripper is the part
of the blower located between the inlet and the outlet in which the annulus is
Ài`ÕVi`ÊÊÃâiÊÌÊwÌÊVÃiÞÊÌÊÌ
iÊÃ`iÃÊ>`ÊÌ«ÃÊvÊÌ
iÊ«iiÀÊL>`iîÊÌ
iÊ>ÀÊ
is "stripped" from the impeller and diverted out of the blower. The pressures
or vacuums generated by the one or two spinning, non-contacting, oil-free
impellers are equal to those obtained by many larger multi-stage or positive
displacement blowers.
Catalog
Number Description
ROT-DR454R58 ÜiÀÊÜÉÌÀ]Ê-}iÊ*
>Ãi]Ê££xÓÎä6]ÊxäÉÈäÊâ
ROT-DR454R72 ÜiÀÊÜÉÌÀ]Ê/
ÀiiÊ*
>Ãi]ÊÓÎä{Èä6]ÊxäÉÈäÊâ
ROT-516489 ÌiÀÊÃÃiLÞ]Ê£°x¸Ê */®
ROT-515092 *ÀiÃÃÕÀiÊ,iivÊ6>Ûi
ROT-515132 Replacement Filter Element
"7
,Ê-*
/" -
Model DR454R58 DR454R72
*>ÀÌÊ ° äÎÈnxÈ äÎÈnxx
ÌÀÊ
VÃÕÀiÊ/Þ«i TEFC TEFC
ÌÀÊÀÃi«ÜiÀ 1.5 1.5
Voltage (1) ££xÉÓÎä ÓÎäÉ{Èä
*
>Ãi 1 3
ÀiµÕiVÞÊâ®Ê(1) Èä Èä
ÃÕ>ÌÊ
>ÃÃÊ(2) F F
Ê,>Ìi`ÊÌÀÊ«Ã £Ç°ÇÉn°nx {°xÉÓ°Óx
Service Factor 1.15 1.15
Locked Rotor Amps ÈÉ{n ÎÓÉ£È
>Ý°Ê ÜiÀÊ«Ã £n°É°{ {°nÉÓ°{
,iVi`i`Ê
Ê-Ì>ÀÌiÀÊ-âi £Éä ääÉää
7i}
ÌÊLÃÉ}® nÇÉÎ ÇÎÉÎÎ
>Ý°Ê*ÀiÃÃÕÀi°ÊvÊÜ>ÌiÀ ÈxÉxÓ ÈxÉxÓ
>Ý°Ê-ÕVÌ°ÊvÊÜ>ÌiÀ xÉ{x xÉ{x
°ÊÜ*ÀiÃÃÕÀi-
äÉä äÉä
°ÊÜ-ÕVÌ-
äÉä äÉä
NOTE: (1) All 3 phase motors are factory tested and certified to operate on 200-
ÓÎäÉ{ÈäÊ 6
ÎÊ «
ÈäÊ âÊ >`Ê ÓÓäÓ{äÉÎnä{£xÊ 6
ÎÊ «
xäÊ â°Ê Ê Ê £Ê «
>ÃiÊ
ÌÀÃÊ>ÀiÊv>VÌÀÞÊÌiÃÌi`Ê>`ÊViÀÌwi`ÊÌÊ«iÀ>ÌiÊÊ££xÉÓÎä6
£Ê«
ÈäÊâÊ>`Ê
ÓÓäÓ{äÊ6
£Ê«
xäÊâ°
(2)
Ê >ÝÕÊ «iÀ>Ì}Ê Ìi«iÀ>ÌÕÀiÃ\Ê ÌÀÊ Ü`}Ê Ìi«iÀ>ÌÕÀiÊ Ü`}Ê ÀÃiÊ
«ÕÃÊ>LiÌ®ÊÃ
Õ`ÊÌÊiÝVii`Ê£{äc
ÊvÀÊ
>ÃÃÊÊÃÕ>ÌÊÀÊ££äc
ÊvÀÊ
>ÃÃÊ Ê
ÃÕ>Ì°ÊÊ ÜiÀÊÕÌiÌÊ>ÀÊÌi«iÀ>ÌÕÀiÊÃ
Õ`ÊÌÊiÝVii`Ê£{äc
Ê>ÀÊÌi«iÀ>ÌÕÀiÊ
rise plus ambient).
*>iÊÕÌÊ
ÕÃ}ÃÊ>ÀiÊ>ÊÃ>viÊiÌ
`ÊvÀÊ>}ÊiÊiiVÌÀ`iÊViVÌÃÊÊÀ>ViÜ>ÞðÊÊÕÃ}ÃÊÜÌ
Ê«ÀiwÝÊ-/Ê>ÀiÊ ÀÃV>ÌiÊ
i>ÌÊÀiÃÃÌ>ÌÊVi>ÀÊ}>ÃðÊÊ
Housings with prefix TRA use white high alumina porcelain ceramic. 7500V rated.
/,ÓÊ
ÕÃ}ÃÊ>ÀiÊ«iÀviVÌÊvÀÊÕÃiÊÊV
>iÊiÌÌiÀÃÊÜÌ
Ê
ÕÃ}ÊÌÀ>ÃvÀiÀÃÊÌÊVvÀÊÌÊ1ӣȣÊÀiµÕÀiiÌðÊÊÇxää6ÊÀ>Ìi`°
TRA-1019 is the same white porcelain housing used in housing transformers. Wire terminal included. 5000V rated.
Catalog Panel Hole Overall Housing Case
Number Description Size Length Opening Qty.
STA-100 >À}i]Ê
Ãi`Ê £ÎÉ{¸Ê ÎxÉn¸Ê ÇÉn¸Ê xä
TRA-TC100 >À}i]Ê
Ãi`Ê £ÎÉ{¸Ê ÎxÉn¸Ê ÇÉn¸Ê xä
STA-200 ->]Ê
Ãi`Ê £xÉ£È¸Ê Î£ÉÓ¸Ê ÇÉn¸Ê xä
TRA-TC200 ->]Ê
Ãi`Ê £°£{¸Ê ΰ{È¸Ê °nÇ¸Ê xä
STA-100 TRA-1019 STA-200P STA-200
STA-200P ->]Ê-
ÀÌ]Ê
Ãi`Ê £xÉ£È¸Ê Ó£ÉÓ¸Ê ÇÉn¸Ê £ää TRA-TC100 TRA-TC50 TRA-TC200
TRA-TC50 Small, Short, Closed 1.14" 2.55" .87" 50
STA-300 "«iÊ ££ÉÓ¸Ê Î¸Ê ££Én¸Ê £ää
STA-300P "«iÊÜÉ*}Ì>Êi>`Ê ££ÉÓ¸Ê Î¸Ê ££Én¸Ê £ää
TRA-D2 *ÀVi>ÊÜÉÓÊ
Ì>VÌÊ-«À}ÃÊ Ê Ê Ê xä
TRA-D2-SP *ÀVi>ÊÜÉ£Ê
Ì>VÌÊ-«À}Ê Ê Ê Ê xä
TRA-1019 *ÀVi>ÊÃÕ>ÌÀÊ ££É{¸Ê Ó£ÉÓ¸Ê £¸Ê xä STA-300P STA-300 TRA-D2
Sign Supplies
The through-wall type housing is the best way to penetrate walls with neon tubing. Available with a threaded bushing to enable easy installation in a handy box or a
coupling for direct attachment to your rigid or flexible connector on the rear of the housing. 1-2-3 spring connector facilitates an easy make up for the GTO cable. On
ÃÌÊ`Û`Õ>ÊiÌÌiÀÃÊ>`iÊvÊiÌ>ÊV
>i]Ê>Ê£ÎÉn¸Ê
iÊÃÊ`Ài`ÊÀÊ«ÕV
i`ÊÊÌ
iÊL>VÊvÊÌ
iÊiÌÌiÀ°ÊÊÌÌ>V
Ê/"ÊV>LiÊÌÊ£ÓÎÊëÀ}ÊViVÌÀÊ>`Ê«ÕÃ
ÊV>LiÊ
Ì
ÀÕ}
Ê
ÕÃ}°ÊÊÀÊ>Ê££ÉÓ¸Ê
iÊÊÌ
iÊÃÕÀv>ViÊÌ
iÊiÌÌiÀÃÊ>ÀiÊÌÊLiÊÕÌi`ÊÕ«Ê>`Ê>ÌÌ>V
ÊiÌÌiÀ°ÊÊ*ÊVÃÃÌÃÊvÊ>Ê*Ê
ÕÃ}ÊV«iÌiÊÜÌ
Ê>ÊLÕÌÊvÀÌÊ
ÕÌ}Ê«>Ìi°ÊÊ*Ê}>ÃÃÊ
ÕÃ}ÃÊvi>ÌÕÀiÊ>ÊÃViÊ«Õ}ÊÃiÀÌÊÌÊ«ÀÌiVÌÊ>`Ê«ÀiÛiÌÊv>ÕÀiÃÊvÊ/"ÊV>LiÊ>ÌÊÌ
iÊÀi>ÀÊvÊÌ
iÊÌ
ÀÕ}
Ü>Ê
ÕÃ}°
Catalog Put
Number Description Up
*Ê *Ê>ÃÃÊÕÃ}ÊÜÉi>iÊÕLÊ Óx ÕÃ}ÊÜÉi>iÊÕL
TRA-TC2000B /
ÓäääÊ7
ÌiÊ*ÀVi>ÊÕÃ}ÊÜÉi>iÊÕLÊ Óx
PKM *Ê>ÃÃÊÕÃ}ÊÜÉ>iÊÕLÊ Óx
TRA-TC2000A /
ÓäääÊ7
ÌiÊ*ÀVi>ÊÕÃ}ÊÜÉ>iÊÕLÊ Óx
*Ê *ÊÕÃ}ÊÜÌ
Ê"i*iViÊ-
iÊ>`Ê>}iÊ
LÊ Óx ÕÃ}ÊÜÉ>iÊÕL
--",
-Ê",Ê/,"17Ê"1- -
ÊÌ
ÀÕ}
Ü>Ê
ÕÃ}ÊV>ÊLiÊÃÌ>i`ÊÕÌÃ`i°ÊÊ ÞÊ«>V}Ê>ÊV>«ÊÛiÀÊÌ¿ÃÊ
end, it's protected from rain, snow, dust and bugs allowing for many outdoor
>««V>ÌðÊÊ Ì
ÊV>«ÃÊÃÌi`ÊLiÜÊ>ÀiÊÌiÀV
>}i>Li°
Catalog Put PK-AC
Number Description Up TRA-2000CAP PK-CAP
,
*
/Ê*,/-Ê",Ê/,"17Ê"1- -
Catalog Put
Number Description Up
PK-I >ÃÃÊÃiÀÌÊ"ÞÊ Óx
PK-123
iVÌÀÊ-«À}Ê ÕÌÌÊÃÃiLÞÊ £ää
PK-SRC Strain Relief Clip 100 PK-SRC PK-123
PK-G Gasket Only 1
iVÌÀLÌÃÊ*>ÃÃÌ
ÀÕÊ>ÃÃiLiÃÊV>ÊLiÊÕÃi`ÊÌÊ«ÀÌiVÌÊÌ
iÊ«>ÃÃ>}iÊvÊ/"ÊV>LiÊÌ
ÀÕ}
ÊÜ>Ã]ÊVi}Ã]ÊÀ>ViÜ>ÞÃ]ÊV
>iÊiÌÌiÀÃÊ>`ÊÃ}ÊiVÃÕÀiðÊÊÀÊÕÃiÊÜÌ
Ê
iÊÌÀ>ÃvÀiÀÊÃiV`>ÀÞÊVÀVÕÌÊ
}
ÊÛÌ>}iÊÜÀ}ÊÊ`ÀÞÊÀÊ`>«ÊV>ÌðÊÊ*>ÃÃÌ
ÀÕÊÃÌ>ÃÊÊ>ÊÇÉn¸Ê
i°
>V
Ê*>ÃÃÌ
ÀÕÊ>ÃÃiLÞÊVÃÃÌÃÊvÊ>ÊÌ
Ài>`i`Ê£ÉÓ¸Ê>ÕÕÊV`ÕÌÊ«iViÊ>ÌÊëiVwi`Êi}Ì
]ÊvÕÀÊVÕÌÃ]ÊÌÜÊ«>ÃÌVÊLÕÃ
}ÃÊ>`ÊiÊÃi>}ÊLÕÃ
}°ÊÊÀÕ`Ê
À}ÊÃ`ÊÃi«>À>ÌiÞ°ÊÊ/
iÊ£¸Ê*>ÃÃÌ
ÀÕÊ*/£Ê
>ÃÊÞÊÌÜÊVÕÌÃ]ÊiÊ«>ÃÌVÊLÕÃ
}Ê>`ÊiÊÃi>}ÊLÕÃ
}Ê«iÀÊÕÌ°
/
iÊ
, ,Ê*>ÃÃÌ
ÀÕÊ}ÀÕ`ÊÀ}Ê«ÀÛ`iÃÊ>Ê}ÀÕ`ÊL`}Ê«ÌÊvÀÊÌ
iÊ*>ÃÃÌ
ÀÕÊ>ÃÃiLÞ°ÊÊ
-
£ÓÉ-
ÎnÊÃÌÀ>}
ÌÊ*>ÃÃÌ
ÀÕÊvi>iÊViVÌÀÃÊ>ÀiÊÕÃi`ÊÌÊ
ViVÌÊyiÝLiÊiÌ>ÊV`ÕÌÊÌÊÌ
iÊ*>ÃÃÌ
ÀÕÊV`ÕÌ°ÊÊ>`iÊvÊ`iÊV>ÃÌÊâVÊÜÌ
Êvi>iÊ£ÉÓ¸ÊÀÊÎÉn¸Ê */ÊÌ
Ài>`ÃÊÊiÊÃ`iÊ>`Ê>Ê
<" ÊÌÜÃÌÊ>`>«ÌiÀÊÊ
Ì
iÊÌ
iÀ°ÊÊ/
iÊ
ä
£ÓÊÃÊ>ÊäcÊ£ÉÓ¸Ê */Ê*>ÃÃÌ
ÀÕÊViVÌÀ°ÊÊ
-,*/Ê«ÀÛ`iÃÊ>ÊÃÌÕÀiÊÃi>ÊÌ
>ÌÊ«ÀiÛiÌÃÊÜ>ÌiÀÊvÀÊiÌiÀ}ÊÌ
ÀÕ}
ÊÌ
iÊL>VÊvÊ>ÊÃ}Ê
iVÃÕÀiÊÜ
iÀiÊÌ
iÊ*>ÃÃÌ
ÀÕÊiÌiÀð
"Ì
iÀÊ*>ÃÃÌ
ÀÕÊi}Ì
ÃÊ>`Êwi`ÊVÕÌÊÌÃÊ>ÃÊ>Û>>Li°ÊÊÕÊÀ`iÀÊÃÊ«ÕÌÊիʵÕ>ÌÌÞ°
Catalog Put
Number Description Up
ELE-PT1 £¸Ê*>ÃÃÌ
ÀÕÊÌÊ xä
ELE-PT2 Ó¸Ê*>ÃÃÌ
ÀÕÊÌÊ Óx
ELE-PT4 {¸Ê*>ÃÃÌ
ÀÕÊÌÊ £ä
ELE-PT6 ȸÊ*>ÃÃÌ
ÀÕÊÌÊ £ä
ELE-PT8 n¸Ê*>ÃÃÌ
ÀÕÊÌÊ £ä
ELE-PT10 £ä¸Ê*>ÃÃÌ
ÀÕÊÌÊ £ä
ELE-PT12 £Ó¸Ê*>ÃÃÌ
ÀÕÊÌÊ £ä
ELE-RNGR *>ÃÃÌ
ÀÕÊÀÕ`Ê,}Ê
-
£ÓÊ ££ÉÓ¸ÊÊ-ÌÀ>}
ÌÊi>iÊ
iVÌÀ
-
ÎnÊ ÎÉn¸ÊÊ-ÌÀ>}
ÌÊi>iÊ
iVÌÀ
ä
£ÓÊ £ÉÓ¸ÊÊäcÊi>iÊ
iVÌÀ
ELE-SRPT *>ÃÃÌ
ÀÕÊ-i>}Ê,}
Sign Supplies
EGL cold cathode lamp housing terminals are UL-approved.
Single (feed) terminals and double (intermediate) terminals
are offered in surface-mount configurations with side access
ports as well as recess-mount configurations with bottom access
«ÀÌÃ]Ê vÀÊ ÀÕÌ}Ê
}
Ê ÛÌ>}iÊ vii`Ê ÜÀiÃÊ Õ«Ê ÌÊ É£È¸Ê Ê
`>iÌiÀ°ÊÊÕÃ}ÃÊ>ÀiÊvÊÜ
ÌiÊ}>âi`Ê«ÀVi>ÊViÀ>VÊ>`Ê
>ÀiÊiµÕ««i`ÊÜÌ
ÊëÀ}ÊLÀâiÊ>«ÊVÌ>VÌÃÊÌÊ>VV`>ÌiÊ
right angle 19mm brass capped electrodes of cold cathode
lamps in 25, 20 and 18mm diameters.
Catalog
Number Description
EGL-211R Recessed Housing
EGL-211RT Recessed Housing, Terminal End
EGL-211S -ÕÀv>ViÊÕÌÊÕÃ}
EGL-211ST -ÕÀv>ViÊÕÌÊÕÃ}]Ê/iÀ>Ê
`
"Ê
/"
Ê
Ê,
*/
Ê--
9
-
,ÊÃÊ>ÊÕÌ`ÀiVÌ>Êvii`ÊÀiVi«Ì>ViÊvÀÊV`ÊV>Ì
`iÊ}
Ì}°ÊÊÌÊVÃÃÌÃÊvÊ
an uneven dual bored ceramic housing. Dual spring inside connects electrode and GTO
wires. All wiring is fully contained inside the housing. Has a bonding wire attachment
LiÌÜiiÊÌ
iÊL>ÃiÊ>`ÊÌ
iÊL`}ÊÜi`}i°ÊÊ
>ÊLiÊV«iÌi`ÊÜÌ
Ê -
*
Ê
`ÕÌÊ
*Õ}ÊÃÃiLÞ°ÊÊ1ÊÃÌi`ÊvÀÊÕÃiÊ`ÀÃÊ>`ÊÊ`>«ÊV>Ìð
Catalog Put
Number Description Up
Ê -
DIMENSIONS
-
,
Overall Large Small Center to Shown in use
Dimensions Opening Opening Center
ÊÓxÉn¸ÊÝÊ££ÉÓ¸ÊÝÊÓÎÉ{¸Ê £¸Ê°°Ê ÇÉn¸Ê°°Ê £ÎÉn¸
-Ê`iÊÓÓÊy>Ã
iÀÃÊ>ÀiÊ>ÊÀi>LiÊ>`ÊiVV>ÊÜ>ÞÊÌÊ>``Êvv]Ê>ÌiÀ>Ì}ÊÀÊVÀÊV
>}}ÊivviVÌÃÊÌÊ>ÊÃ}ÊÀÊÌ
iÀÊ`iÛVi°ÊÊ
Ì>VÌÃÊ>ÀiÊÀ>Ìi`ÊÌÊ
>`iÊ£xÊ>«Ã°ÊÊ`iÊÓÓÊ
}
ÊÕÌ«ÕÌÊy>Ã
iÀÃÊ>ÀiÊVÃÌÀÕVÌi`ÊÜÌ
ÊiÝÌÀ>ÊÃÕ>ÌÊ>`Ê>ÊVÀi>Ãi`Ê«ÌÊ«i}Ê
ÌÊâiÊ>ÀV}ÊÜ
iÊÕÃi`ÊÊ
}
ÊÌ>Ê`À>ÜÊ>««V>ÌÃÊÃÕV
Ê>ÃÊy>Ã
}ÊL>>ÃÌðÊÊÊ«>ÀÌÃÊ>ÀiÊÀi«>Vi>Li°
`iÊ£Êy>Ã
iÀÃÊ>ÀiÊÌ
iÊÃÌÊL>ÃVÊ>Û>>Li°ÊÊ>Ã
iÀÃÊ>ÀiÊ«ÜiÀi`ÊLÞÊ>ÊÃÞV
ÀÕÃÊÌÀÊÌ
>ÌÊ`ÀÛiÃÊ£ÊÀÊÓÊV>ÃÊ£ÓÊÀ«°ÊÊ-Ì>`>À`Ê
µÕ>ÀÌiÀɵÕ>ÀÌiÀÊV>ÊVÕÌÊÞi`ÃÊÓ{ÊvvÊy>Ã
iÃÊ«iÀÊÕÌi°ÊÊ"Ì
iÀÊV>ÃÊ>Û>>LiÊÕ«ÊÀiµÕiÃÌ°
££x6ÊUÊxäÉÈäâ
Catalog Cam Flashes/ Model 22
Number Circuits Action Cut cct/min.
Ê-ÓÓä£Ê £Ê ""vvÊ xäÉxäÊ-ÞV
ÀÕÃÊ ÓäÎä
Ê-ÓÓä£"Ê £Ê ""vvÊ xäÉxäÊ-ÞV
ÀÕÃÊ ÓäÎä DIMENSIONS
Ê-ÓÓäÓÊ ÓÊ ""vvÊ xäÉxäÊ-ÞV
ÀÕÃÊ ÓäÎä
Model Weight
Ê-ÓÓÓÊ ÓÊ ÌiÀ>ÌiÊ xäÉxäÊÌiÀ>Ì}Ê ÓäÎä Number Dimensions (Lbs.)
Ê-£ä£Ê £Ê ""vvÊ +Õ>ÀÌiÀÉ+Õ>ÀÌiÀÊ Ó{ 22 5" x 4.5" x 3" 3
Ê-£äÓÊ ÓÊ ""vvÊ +Õ>ÀÌiÀÉ+Õ>ÀÌiÀÊ Ó{ 1 3.5" x 4" x 3" 2 Model 1
-Ê ",
,Ê
-
,-ÊEÊ-
//",-
`iÊÎÎÊV
>ÃiÀÃÊ>ÀiÊÃÌÊVÞÊÕÃi`ÊÊy>Ã
}ÊV>`iÃViÌÊLÕLÊÃ}ÃÊÜ
iÀiʸ`>ÀÊëÌøÊV
>ÃiÊ>ÀÕ`Ê>ÊLÀ`iÀÊÀÊ
Ü
iÀiÊ`ÀiVÌ>ÊÌÊÃÊVÀ«À>Ìi`ÊÌÊ>Êwi`ÊvÊLÕLðÊÊÌÊV>ÊLiÊÕÃi`ÊÌÊV
>ÃiÊi]ÊÌ
Õ}
ÊÌÊÕÃÌÊLiÊVÀ«À>Ìi`ÊÊÌ
iÊ
«À>ÀÞÊÃ`iÊvÊ>ÞÊÌÀ>ÃvÀiÀðÊÊ-«ii`ÊV>ÊLiÊwi`Ê>`ÕÃÌi`ÊÕÃ}Ê>ÊÃVÀiÜÊ`ÀÛiÀ°ÊÊÊ«>ÀÌÃÊ>ÀiÊÀi«>Vi>Li°ÊÊ`iÊÎÎÊV
>ÃiÀÃÊ
are ruggedly constructed to provide years of smooth, quiet, trouble free service. Contacts are rated to handle 10 amps each and
are accessible for easy replacement. Available with 3, 4 or 5 circuits. Larger chasers available by special order.
`iÊÈÈÊV
>ÃiÀÃÊ>ÀiÊ}iiÀ>ÞÊÕÃi`ÊÌÊVÀi>ÌiÊ>ÊÃVÌ>Ì}ÊÀʸÌÜ}¸Ê>VÌÊÊwi`ÃÊvÊy>Ã
}ÊLÕLðÊÊ
>ÃiÀÃÊV>Ê>ÃÊLiÊ
wired to create a chasing action. These units are constructed of very heavy duty materials to stand up under constant use with
i>ÛÞÊ>`ðÊÊÊ«>ÀÌÃÊ>ÀiÊÀi«>Vi>Li°ÊÊ/
iÊy>Ã
}Êëii`ÊvÊÌ
iÊ`iÊÈÈÊV>ÊLiÊwi`Ê>`ÕÃÌi`ÊÕÃ}Ê>ÊÃVÀiÜÊ`ÀÛiÀ°ÊÊ>Ã
iÀÊÃÊ Model 33
supplied with a shade on each motor and as shades are removed the flashing speed decreases. When operating with shades on 4 Circuit
{ÎäÊy>Ã
iÃÊ«iÀÊVÀVÕÌÊ«iÀÊÕÌi®ÊÌ
iÊVÌ>VÌÃÊÊ>Ê`iÊÈÈÊÕÌÃÊ>ÀiÊÀ>Ìi`Ê>ÌÊ£Ó°xÊ>«ÃÊi>V
°ÊÊ7
iÊ«iÀ>Ì}ÊÜÌ
ÊÃ
>`iÃÊ
off (250 flashes per circuit per minute) the contacts on the 3 and 4 point units are rated at 20 amps each, while the contacts on
Ì
iÊxÊ>`ÊÈÊ«ÌÊÕÌÃÊ>ÀiÊÀ>Ìi`Ê>ÌʣǰxÊ>«ÃÊi>V
°
££x6ÊUÊxäÉÈäâ
Catalog Flashes/
Number Circuits cct/min. Action DIMENSIONS
Ê-ÎÎ
ÎÊ 3 210-270 Chase Model Weight
Ê-ÎÎ
{Ê 4 210-270 Chase Number Dimensions (Lbs.)
Ê-ÎÎ
xÊ xÊ £äÓ£xÊ >À`iÀÊ
>ÃiÀ
Ê-ÎÎ
ÈÊ ÈÊ Ó£äÓxäÊ >À`iÀÊ
>ÃiÀ 33-C3, C4 È°x¸ÊÝÊx¸ÊÝÊ{°Çx¸Ê x
33-C5 n¸ÊÝÊx¸ÊÝÊ{°Çx¸Ê È Model 66
Ê-ÈÈ
ÎÊ 3 250-420 High Speed Chase Ê ÎÎ
È 8" x 5" x 5" 7 4 Circuit
Ê-ÈÈ
{Ê 4 250-420 High Speed Chase
Ê ÈÈ
Î]Ê
{ ǸÊÝÊȸÊÝÊ{¸Ê Ç
Ê-ÈÈ
xÊ 5 250-420 Scintillate Ê ÈÈ
x]Ê
È 7.25" x 9" x 4" 10
Ê-ÈÈ
ÈÊ ÈÊ Óxä{ÓäÊ -VÌ>Ìi
-ÊÊ6"/
Ê /",-
`iÊxxÊ>>ÌÀÃÊ>ÀiÊëiVwV>ÞÊ`iÃ}i`ÊÌÊ`ÃÌÀLÕÌiÊÌ
iÊÃiV`>ÀÞÊÛÌ>}iÊvÊ>ÊiÊÌÀ>ÃvÀiÀ°ÊÊ1ÌÊ
will handle from 7,500 to 15, 000 volts and distribute this high voltage to up to 8 circuits from a single
transformer. For this reason the model 55 is referred to as a "neon animator". Secondary current is 30mA.
Speed can be adjusted from 35 to 300 circuit flashes per minute. All parts are replaceable.
££x6ÊUÊxäÉÈäâ
Catalog DIMENSIONS
Number Contacts Circuits
Ê-xx{Ê 4 2 or 4 Model Weight
Ê-xxÈÊ ÈÊ Ó]ÊÎÊÀÊÈ Number Dimensions (Lbs.)
Model 55
Ê-xxnÊ 8 8 55 È°x¸ÊÝÊ{°x¸ÊÝÊÇ°ÎÇx¸Ê Ç
Sign Supplies
`iÊÎÎÊëiiÀÃÊ>ÀiÊ`iÃ}i`ÊvÀÊ>««V>ÌÃÊÜ
iÀiÊiiVÌÀVÊVÀVÕÌÃÊ>ÀiÊÌÊLiÊy>Ã
i`ÊÊVÕÃÌÊÃiµÕiViÃÊÃÕV
Ê>ÃÊÜÌ
Êëi}ÊÀÊÌ
iÀÊ>>Ì°ÊÊ6>À>LiÊÊLÌ
ÊVÞViÊ
speed and cam cut. Spellers are some of the most versatile sign controllers available. Flashing sequence on each speller is custom made to customer specifications. Units can
be built with as few as one circuit or as many as necessary to accommodate the requested flashing sequence. Neon can be controlled by installing the speller on the primary
Ã`iÊvÊÌÀ>ÃvÀiÀðÊÊ
>V
ÊVÌ>VÌÊÃÊÀ>Ìi`ÊÌÊ
>`iÊ£xÊ>«Ã°ÊÊ*i>ÃiÊëiVvÞÊÃiµÕiViÊ>ÌÊÌiÊvÊÀ`iÀ°ÊÊÕÃiÊÃiµÕiViÊÃÊÃiµÕiViÊ£°
££x6ÊUÊxäÉÈäâ
Catalog Seconds
Number Speed /Cycle Ordering Information
Ê-ÎÎ-ÊIÊÊ Fast 2-8 Substitute "*" with the number of circuits desired.
Ê-ÎÎ-ÊIÊÊ Êi`ÕÊ {Óä i.e. FMS-33-S4F = 4 circuit, fast speed speller.
Ê-ÎÎ-ÊIÊ-Ê Slow 8-40
Ê-ÎÎ-ÊIÊ8-Ê Extra Slow 18-90 Not all speeds are available in every circuit configuration.
1
Ê",Ê
" -/,1
/ Ê-*
,Ê-
+1
The most requested and used sequences are shown below. Almost any desired sequence can be constructed. "Cycle" refers to the time required for the flashing action
to go through its complete performance and start to repeat. "Time of Cycle" is expressed in seconds. "Circuit" refers to the current controlled by one cam and one set
of contact points. The time on for a circuit is indicated by an "X" in the box, time off is indicated by a blank box.
1 X X X X X X 1 X X X X X 1 X
2 X
Repeat
Circuit
2 X X X X
Repeat
2 X X X X X
Circuit
Repeat
Circuit
3 X X X X 3 X X X 3 X
4 X X X 4 X X 4 X
5 X X 5 X 5 X
SEQUENCE 1 SEQUENCE 2 SEQUENCE 3
1 on, 2 on, 3 on, 4 on, 5 on, 1 on, 2 on, 3 on, 4 on, 5 on, 1 on, 1 off/2 on, 2 off/3 on, 3 off/4 on,
all off, all on, all off, repeat. all off, repeat. 4 off/5 on, 5 off, repeat.
1 X 1 X X X X X X X X X X X
2 X 2 X X X X X X X X X
Repeat
Circuit
Repeat
Circuit
3 X 3 X X X X X X X
4 X 4 X X X X X
5 X 5 X X X
SEQUENCE 4 6 X
1 on, 1 off/minimum off, 2 on, 2 off/minimum off, 3 on, SEQUENCE 5
3 off/minimum off, 4 on, 4 off/minimum off, Wipe on and wipe off lighting effect,
5 on, 5 off/minimum off, repeat. all off, repeat.
*ÀiwÝÊ«>ÀÌÊÕLiÀÊÜÌ
ʸ-¸ÊvÀÊV>Ì>}ÊÕLiÀ°
Insulating Block: BY Coil 115V. 60 Hz.: AA-1
ÃÕ>Ì}Ê/ÕLi\ÊÊ 8£ Core: AZ
Screws: 8-32 x 1 Rd. Hd. Brass Washer: 8-32
Washer: 10-32 Internal External Lock -VÀiÜ\ÊÊnÎÓÊÝÊÎÉnÊÊ°Ê`°
Cup Washer: 10-32
VViÌÀVÊÃÃiLÞÊÈÈ
Î\ÊÊ
7Î
Insulator Head
Ì>VÌÊ V]ÊÛ>Li\ÊÊ
VViÌÀVÊÃÃiLÞÊÈÈ
{\ÊÊ
7{
4 Circuit: DI-4
Screw: 5-40 x 1/8 Rd. Hd. Brass
VViÌÀVÊÃÃiLÞÊÈÈ
x\ÊÊ
7xÈ
6 Circuit: DI-6
Bearing Shields: ET
Center Post: DL 8 Circuit: DI-8
Û>LiÊ
Ì>VÌÃ 1/4 Bearing, Upper: ER
Screw 10-24 x 3/4 Rd. Hd. SS. `ÕÃÌ>Li\ÊÊ
Bearing Cap: BL-2
Nut: 8-32 Brass
Speed Nut: 10-24 SS. `ÕÃÌ>LiÊ
Ì>VÌÊ"Þ\ÊÊ
iÌÊ7>Ã
iÀ\ÊÊ -
Cup Washer: No. 10
LiÀÊ7>Ã
iÀ\Ê °Ê8
Outer Post: DK
ÃÕ>Ì}Ê V]Ê1««iÀ\ÊÊ
Ó
Gasket: DH Rotor Arm
ÃÕ>Ì}Ê V]ÊÜiÀ\ÊÊ
£
4 Circuit: DV-1
Ì>VÌÊ À>ViÌÊÃÃiLÞ ÃÕ>Ì}Ê/ÕLi\ÊÊ 8Ó
6 Circuit: DV-2
Stationary: EI Insulating Washer: EL
8 Circuit: DV-3
-VÀiÜ\ÊÊnÎÓÊÝÊxÉnÊ°Ê`°Ê--° Screws: 8-32 x 3/16 Rd. Hd. Screw: 10-32 x 1-1/8 Rd. Hd. Brass
-VÀiÜ\ÊÊnÎÓÊÝÊ£É{ÊÌ°Ê`°Ê--°
Washer: No. 8 SS. 10-32 Washer internal-external lock
Spring Washer: BQ 10-32 Cup Washer
,ÌÀÊ*ÃÌ\ÊÊ
Bushing: DU Nut: 6-32 SS.
Speed Nut: 8-32 SS.
>}iÌÊÃÃiLÞ\ÊÊ /Î Coil 115V. 60 Hz Long Leads: ES-1 Insulator Block: BY
Disk: AG-2
Coil 115V. 60 Hz Short Leads: ES-2 Screws: 10-32 x 1-3/8 Rd. Hd. Brass
-VÀiÜ\ÊÊ{{äÊÝÊÎÉnÊ°Ê`°Ê--°
Core: AZ
Screws: 8-32 x 3/8 Rd. Hd. ÃÊ>`ÊÕL\ÊÊÎ
Upper Bearing: DQ Coil: DW -VÀiÜ\ÊÊnÎÓÊÝÊÎÉ£ÈÊ°Ê`°
Core: DO *iÊ*iViÊÃÃiLÞ\ÊÊ 7Î
Disk Shaft: EO
-VÀiÜ\ÊÊnÎÓÊÝÊÎÉnÊÌ°Ê`° Rear Bearing 1/4: BK-1
Shaft: DS Lower Bearing: DR
Bearing Cap: BL-3
Sign Supplies
Rocox variable speed solid state flashers are totally silent in operation with easy speed
control making Rocox flashers ideal for indoor or outdoor operation. Flashers come
encased in a weatherproof "bell" box making it unnecessary to enclose in another box.
-«ii`ÊÀ>}iÊÃÊxäÈääÊy>Ã
iÃÊ«iÀÊVÀVÕÌÊ«iÀÊÕÌi°ÊÊ ÌÊÌÊLiÊÕÃi`ÊÊVÕVÌÊ
with flashing ballasts. When flashing transformers, a Rocox snubber is needed for each
transformer. A Rocox snubber is built into all 1 and 2 circuit models. Available in voltage
ranges from 24V on up and also in 20 amp versions.
££x6ÊUÊxäÉÈäâ
Catalog Amps
Number Circuits /Circuit Watts
ROC-110 1 10 1,150
ROC-210 2 10 1,150
10 Amp. Unit 20 Amp. Unit
ROCOX SOLID STATE CHASERS
Rocox solid state chasers include the same features as the flashers above with the
following additions; Chasers are fast enough so that 1 on, 2 or 3 off, look as good or
LiÌÌiÀÊÌ
>ÊÎÊ]Ê£ÊvvÊÜ
V
Ê`iÛiÀÃÊ>ÊiiVÌÀVÌÞÊÃ>Û}ÃÊvÊxä¯ÊÌÊÈx¯°ÊÊ/ÊÀi«>ViÊ
a mechanical chaser, no wiring changes are needed. Spellers are also available in any
number of circuits. DIMENSIONS
££x6ÊUÊxäÉÈäâ
Description Dimensions
Catalog Amps
Number Circuits /Circuit Watts Ê£äÊ«Ê>Ã
iÀÃ]Ê
>ÃiÀÃ]Ê->ÛiÊ {£ÉÓ¸ÊÝÊΣÉÓ¸
ÊÓäÊ«Ê>Ã
iÀÃÊ>`Ê
>ÃiÀÃÊ {£ÉÓ¸ÊÝÊx£ÉÓ¸
ROC-310 3 10 1,150
ROC-320 3 20 2,300
ROC-410 4 10 1,150
ROC-420 4 20 2,300
ROCOX ACCESSORIES
The ROC-120-S slave is for loads greater then 20 amps per circuit. To be used with a
Rocox flasher or chaser. The flasher or chaser controls the action of the lights driven
by either the flasher or chaser and the slave unit. The slave's power line comes from
a separate circuit thus preventing overloading the flasher or chaser and circuit breaker.
Enclosed in a weatherproof "bell "box. When flashing transformers, a Rocox snubber is ROC-120-S
needed for each transformer. A Rocox snubber is built into all 1 and 2 circuit models.
££x6ÊUÊxäÉÈäâ
Catalog Amps
Number Circuits /Circuit Watts
ROC-120-S 1 20 2,300
ROC-SNUB Snubber - -
-iiiiÊ6ÊÃÊÌ
iÊÕÌ>ÌiÊyiÝLiÊÃÕLÃÌÀ>ÌiÊvÀÊÌÀ>ÃÕViÌÊÃ}Ê>««V>ÌðÊÊÌÊ
can be decorated with self-adhesive film, spray paint, screen printing, digital
«ÀÌ}Ê>`Ê
i>ÌÊÌÀ>ÃviÀÊ>ÌiÀ>ðÊÌÊ
>ÃÊiÝViiÌÊ16Ê«ÀÌiVÌ]ÊwÀiÊÀiÌ>À`>ÌÊ
«À«iÀÌiÃÊ>`Ê>Ì`iÜÊ>``ÌÛiðÊÊ*ÀÌ>LiÊÊLÌ
ÊÃ`iÃÊÜÌ
ÊLÀ>ÌÊVÀðÊÊ
/
iÊÌ«V>ÌÊvÀÊ-iiiiÊ6Ê>ÃÊVÀi>ÃiÃÊÌ
iÊ«À`ÕVÌ¿ÃÊviÊë>Ê>`Ê}ÛiÃÊÌÊ
excellent receptivity with self-adhesive film.
Available in roll widths shown below without seams eliminating cutting loss and
weak seams. Sold by the foot.
Catalog Description Put Up
Number /Width Roll
SEE-4-3.5 7
ÌiÊ-iiiiÊ6]ÊÎ¿È¸Ê £È{¿
SEE-4-4.5 7
ÌiÊ-iiiiÊ6]Ê{¿È¸Ê £È{¿
SEE-4-5.5 7
ÌiÊ-iiiiÊ6]Êx¿È¸Ê £È{¿
SEE-4-6.5 7
ÌiÊ-iiiiÊ6]ÊÈ¿È¸Ê £È{¿
SEE-4-7.5 7
ÌiÊ-iiiiÊ6]ÊÇ¿È¸Ê £È{¿
SEE-4-8.5 7
ÌiÊ-iiiiÊ6]Ên¿È¸Ê £È{¿
SEE-4-10.5 7
ÌiÊ-iiiiÊ6]Ê£ä¿È¸Ê £È{¿
SEE-4-12.5 7
ÌiÊ-iiiiÊ6]Ê£Ó¿È¸Ê £È{¿
SEE-4-16.33 7
ÌiÊ-iiiiÊ6]ʣȿ{¸Ê £È{¿
," É- /
Ê
8
Ê
Ê-1 -/,/
ÀÉ-}ÌiV
Ê>Õv>VÌÕÀiÃÊ
}
ʵÕ>ÌÞÊyiÝLiÊv>ViÊ>ÌiÀ>ðÊÊ 8ÊÃiÀiÃÊÃÊ
top-coated to accept vinyl applications. Custom cut and seamed faces are available
and delivered in a timely manner. Available upon request.
""
9Ê
8
Ê6 9Ê
-
Cooley manufactures high quality flexible faced materials for backlit signs and
awnings and a full spectrum of products including reinforced polymer membranes,
banner and billboard material, decorating products and many more related products
for the sign making, outdoor advertising and point-of-purchase markets.
Coolthaane
Þ ÀÌiÊ-{ÓÊ7
ÌiÊ-}Ê
iÞ ÀÌi iLÀ>i
ÕÃÌÊ
Ài`Ê
Þ ÀÌi First Face 4-in-1
Þ ÀÌiÊ
iÞÊ>}V
Þ ÀÌiÊÌi
iÞÊ
i>}Ê*À`ÕVÌÃ
Custom Striping Coolmask
Sign Supplies
Caps are used to insulate connections between the electrode and GTO cable.
Room for GTO cable return provided. Sleeves are used to insulate connections
between two back-to-back electrodes. Tapered sleeves are used to insulate
connections between the electrode and GTO cable.
Catalog Put
Number Description Color Up
Cap 12 - 15mm Tapered Sleeve
DIV-C-10 10mm Cap Gray 25
DIV-C-12 12mm Cap Gray 25
DIV-C-12B £ÓÊ
>«Ê >VÊ Óx
DIV-C-13 13mm Cap Gray 25
DIV-C-15 15mm Cap Gray 25
DIV-C-15B £xÊ
>«Ê >VÊ Óx
DIV-C-D 15mm Double Cap Gray 25
DIV-S-12 12mm Straight Sleeve Gray 25
DIV-S-13 13mm Straight Sleeve Gray 25
DIV-S-15 15mm Straight Sleeve Gray 25 Straight Sleeve ÕLiÊ
>«
DIV-102-SS 12-15mm Tapered Sleeve Gray 25
/, -
"Ê-"/Ê-
"
Ê/*
,
Ê
/,"
Ê -1/",-
Catalog Put
Number Description Color Up
TRA-75-12-01 £ÓÊ-vÌÊ-ViÊ/>«iÀi`Ê-iiÛiÊ >VÊ £ää
TRA-75-12-10 12mm Soft Silicone Tapered Sleeve Gray 100
TRA-75-15-01 £xÊ-vÌÊ-ViÊ/>«iÀi`Ê-iiÛiÊ >VÊ £ää Soft Silicone Tapered Sleeve
TRA-75-15-10 15mm Soft Silicone Tapered Sleeve Gray 100
Sign Supplies
Flex-LEDs are a 12VDC low voltage, flexible, monochromatic, LED strip designed
specifically for illuminating channel or back-lit letters and logos. Also well suited
for linear lighting strips, architectural coves, display cases or other applications
where an energy efficient light source is required.
Flex-LEDs have a 1.5" bend radius. Strips can be cut into 3" sections along dotted
lines found on strip. A jumper socket is located approximately every 3" and can
be used to “jump” power to and from each piece or strip.
Catalog Put iÝ
Ê-ÌÀ«
Number Description Watts/Ft Up
-6
, Clear Red Flex-LED 12" Strip 1.5 10
-6
7 White Flex-LED 12" Strip 2.8 10
-6
Amber Flex-LED 12" Strip 1.5 10
-6
Ê ÕiÊiÝ
Ê£Ó¸Ê-ÌÀ«Ê Ó°nÊ £ä
-6
Green Flex-LED 12" Strip 2.8 10 Õ«iÀÊ
>Li
-6
, Ruby Red Flex-LED 12" Strip 1.5 10
--",
-
ÕÌ}ÊV«ÃÊÃ`ÊÊVÀiiÌÃÊvÊÎä° PCB Length 12" (305 mm)
Ê *
Ê/
ViÃÃÊ ä°äÎǸÊä°{Ê®
SUPERVISION
8
Ê
"Ê/- Optical Data 100° Beam Spread
Catalog Put Environmental Specs. -65°F to 130°F, 0-100% Humidity (No Direct Rain)
Number Description Up
SV-EVSKÊ -Ì>ÀÌiÀÊÌÊÜÉ£äÊ
i>ÀÊ,i`Ê
8
Ê-ÌÀ«ÃÊ £ Lamp Life 100,000 Hours: Red, Clear Red, Orange, Amber
SV-EVRKÊ ,>LÜÊ-Ì>ÀÌiÀÊÌÊÜÉÇÊvviÀiÌÊ
ÀÊ-ÌÀ«ÃÊ £ Ê ÊÊ Èä]äääÊÕÀÃ\Ê7
Ìi\ÊÀii]ʵÕ>]Ê Õi]Ê7
Ìi
*iÀ}
ÌÊÜÊÛÌ>}iÊ£Ó6
Ê
ÊÃÞÃÌiÃÊ>ÀiÊÃÕÌ>LiÊvÀÊ`ÀÊ>`ÊÕÌ`ÀÊ>««V>ÌðÊÊÊÃÞÃÌiÊ`ÕiÃÊ>ÀiÊV>Ìi`ÊÜÌ
Ê>ÊÃViÊVvÀ>ÊV>Ì}ÊÜ
V
Ê>`ÃÊ
in protection when exposed to high humidity or other harsh environments. Through enhanced protection with improved resistance to UV light in an exposed application
V>Ì}Ê`iÃÊÌÊ>vviVÌÊ}
ÌÊÕÌ«ÕÌ°ÊÊÛ>>LiÊÊÃiÛiÀ>ÊVw}ÕÀ>ÌÃ\
Catalog Color/Wavelength Volt Current Power Dimenssions (Inch) Put
ÀiVÌÊ}
ÌÊÊÇxä®\ÊÊxÊÌÊÊ
ÃÊ`i«i`}Ê
Number Module Type Name nm (Vdc) (Amp) (Watt) Length Width Height Up on color) mounted on an 8.4" elongated
printed circuit board with soldered leads.
PER-750-R630Ê ÀiVÌÊ}
Ì]ÊxÊ
Ê ,ÕLÞÊ,i`Ê ÈÎäÊ £ÓÊ ä°äxÊ ä°ÈÊ n°{Ê ä°xÊ ä°£xÊ Óää
PER-750-R615Ê ÀiVÌÊ}
Ì]ÊxÊ
Ê
i>ÀÊ,i`Ê È£xÊ £ÓÊ ä°äxÊ ä°ÈÊ n°{Ê ä°xÊ ä°£xÊ Óää *ÀiÜÀi`]Ê Ã«>Vi`Ê Î¸Ê >«>ÀÌÊ ÜÌ
Ê «Ài>««i`Ê
PER-750-A590Ê ÀiVÌÊ}
Ì]ÊxÊ
Ê LiÀÊ xnäÊ £ÓÊ ä°äxÊ ä°ÈÊ n°{Ê ä°xÊ ä°£xÊ Óää «ÀiÃÃÕÀiÃiÃÌÛiÊ 6 Ê Ì>«iÊ vÀÊ i>ÃiÊ Ê
PER-750-G525Ê ÀiVÌÊ}
Ì]ÊÊ
Ê ,ÕLÞÊ,i`Ê xÓxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ n°{Ê ä°xÊ ä°£xÊ Óää installation and retrofit applications.
PER-750-B470Ê ÀiVÌÊ}
Ì]ÊÊ
Ê ÕiÊ {ÇäÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ n°{Ê ä°xÊ ä°£xÊ Óää
PER-750-W9Ê ÀiVÌÊ}
Ì]ÊÊ
Ê 7
ÌiÊ {ÇxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ n°{Ê ä°xÊ ä°£xÊ Óää ÊÀiVÌÊ}
ÌÊÇÈäÉÇÈx®\ÊÊÓÊÌÊ{Ê
ÃÊ
(1)
PER-760-R630 Ê ÊÀiVÌÊ}
Ì]ÊÓÊ
Ê ,ÕLÞÊ,i`Ê ÈÎäÊ xÊ ä°äxÊ ä°ÓxÊ Ó°ÇÊ ä°xÊ ä°£xÊ Óää
(depending on color) mounted on a 2.7"
PER-760-G525Ê ÊÀiVÌÊ}
Ì]ÊÎÊ
Ê ÀiiÊ xÓxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ Ó°ÇÊ ä°xÊ ä°£xÊ Óää or 3.8" elongated printed circuit board with
PER-760-B470Ê ÊÀiVÌÊ}
Ì]ÊÎÊ
Ê ÕiÊ {ÇäÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ Ó°ÇÊ ä°xÊ ä°£xÊ Óää Ã`iÀi`Êi>`ðÊÊ*ÀiÜÀi`]Êë>Vi`ÊθÊ>«>ÀÌÊÜÌ
Ê
PER-760-W9Ê ÊÀiVÌÊ}
Ì]ÊÎÊ
Ê 7
ÌiÊ {ÇxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ Ó°ÇÊ ä°xÊ ä°£xÊ Óää «Ài>««i`Ê«ÀiÃÃÕÀiÊÃiÃÌÛiÊ6 ÊÌ>«iÊvÀÊi>ÃiÊ
PER-765-R630Ê ÊÀiVÌÊ}
Ì]Ê{Ê
Ê ,ÕLÞÊ,i`Ê ÈÎäÊ £ÓÊ ä°äxÊ ä°ÈÊ Î°nÊ ä°xÊ ä°£xÊ Óää in installation and retrofit applications.
PER-765-R615Ê ÊÀiVÌÊ}
Ì]Ê{Ê
Ê
i>ÀÊ,i`Ê È£xÊ £ÓÊ ä°äxÊ ä°ÈÊ Î°nÊ ä°xÊ ä°£xÊ Óää
PER-765-A590Ê ÊÀiVÌÊ}
Ì]Ê{Ê
Ê LiÀÊ xäÊ £ÓÊ ä°äxÊ ä°ÈÊ Î°nÊ ä°xÊ ä°£xÊ Óää ,iyiVÌÊ}
ÌÊÇäÓÉÇÓÓ®\ÊÊÊxÊ
Ê>ÃÃiLÞÊ
PER-703-R630Ê -`iÊ}
Ì]ÊxÊ
Ê ,ÕLÞÊ,i`Ê ÈÎäÊ £ÓÊ ä°äxÊ ä°ÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää mounted on a 1.25" x 1.25" printed circuit
PER-703-R615Ê -`iÊ}
Ì]ÊxÊ
Ê
i>ÀÊ,i`Ê È£xÊ £ÓÊ ä°äxÊ ä°ÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää L>À`ÊÜÌ
ÊÃ`iÀi`Êi>`ðÊÊ*ÀiÜÀi`]Êë>Vi`Ê
PER-703-A590Ê -`iÊ}
Ì]ÊxÊ
Ê LiÀÊ xnäÊ £ÓÊ ä°äxÊ ä°ÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää ȸÊ>«>ÀÌÊÜÌ
Ê«Ài>««i`Ê«ÀiÃÃÕÀiÊÃiÃÌÛiÊ6 Ê
PER-722-WÊ ,iyiVÌÊ}
Ì]ÊxÊ
Ê 7
ÌiÊ {ÇxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää Ì>«iÊvÀÊÀiÌÀwÌÊ>««V>ÌðÊÊ>ÞÊLiÊÃÌ>i`Ê
PER-722-BÊ ,iyiVÌÊ}
Ì]ÊxÊ
Ê ÕiÊ {ÇäÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää in channel letters with returns as shallow as 2"
PER-722-GÊ ,iyiVÌÊ}
Ì]ÊxÊ
Ê ÀiiÊ xÓxÊ £ÓÊ ä°äÎÊ ä°ÎÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää >`Ê>ÀÀÜÊ>ÃÊ£ÉÓ¸°
PER-702-AÊ ,iyiVÌÊ}
Ì]ÊxÊ
Ê LiÀÊ xnäÊ £ÓÊ ä°äxÊ ä°ÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää
PER-702-RÊ ,iyiVÌÊ}
Ì]ÊxÊ
Ê
i>ÀÊ,i`Ê È£xÊ £ÓÊ ä°äxÊ ä°ÈÊ £°£ÓxÊ £°ÓxÊ ä°£xÊ Óää -`iÊ}
ÌÊÇäή\ÊÊÊxÊ
Ê>ÃÃiLÞÊÕÌi`Ê
(1)
"/
\ 5 Volt system requiring a 20-5D converter. on a 1.25" x 1.25" printed circuit board with
Ã`iÀi`Ê i>`Ã°Ê Ê *ÀiÊ ÜÀi`]Ê Ã«>Vi`Ê È¸Ê >«>ÀÌÊ
ÜÌ
Ê«Ài>««i`Ê«ÀiÃÃÕÀiÊÃiÃÌÛiÊ6 ÊÌ>«iÊ
vÀÊÀiÌÀwÌÊ>««V>ÌðÊÊ>ÞÊLiÊÃÌ>i`ÊÊ
channel letters with returns as shallow as 2"
Direct Light Module >`Ê>ÀÀÜÊ>ÃÊ£ÉÓ¸°ÊÊ"ViÊ>««i`ÊÌÊÌ
iÊÀiÌÕÀÊ
of a letter, LEDs glow against the opposing
wall of return.
Mini Direct Light Module
Typical Connection
Sign Supplies
*>ÃVÊ«>ÃÌVÊÌÀÊÃÊ«À`ÕVi`ÊvÀÊ>ÊViÕÃiÊ>ViÌ>ÌiÊLÕÌÞÀ>ÌiÊ
®Ê Jewelite® is a foil laminated in pigmented, color stable butyrate. The
with a metal foil embedded into the trim producing an adhesion with lip portion is filled to give rigidity. Form fits to any style letter. Sold
the plastic material by special process. The result is a brilliant finish in 150' flat dispenser reels. 1" and 2" trim is also supplied in 10'
Ì
>Ì¿ÃÊi>ÃÞÊÌÊVÕÌÊ>`ÊViiÌ°ÊÊ*>ÃVÌÀÊ
>ÃÊ>Ê«iʸ¸ÊVÀÃÃÊÃiVÌÊ lengths, 100' per bundle. Sold by the foot.
>}ÊÌÊyiÝLi°ÊÊÌÊV>ÊLiÊVÕÌÊÜÌ
ÊÃÌ>`>À`Ê
>`ÊÃ
i>ÀÃÊÀÊ«ÀÕ}Ê iÜiÌiÊ ¸¸Ê ÌÀÊ
>ÃÊ Ì
iÊ Ã>iÊ V
>À>VÌiÀÃÌVÃÊ >ÃÊ *>ÃVÌÀÊ iÌÌiÀÊ
Ã
i>ÀðÊÊÀÊvÀ}Ê>}iÃ]Ê>Ê
>`ÊÌV
iÀÊÀÊÌ
iÊ
ÊÜÊVÕÌÊ ÌÀ°ÊÊ-Õ««i`ÊÊ£Èx¿ÊÀðÊÊ-`ÊLÞÊÌ
iÊvÌ°ÊÊ"Ì
iÀÊVÀÃÊ>ÃÊ
Ì
iÊ«ÊvÊÌ
iÊÌÀÊÌÊ>iÊ>ÊÃÌ
ÊVÀiÀ°ÊÊ-Õ««i`ÊÊ£Èx¿ÊÀÃÊ available.
to facilitate continuous mounting without splices and without waste.
Rolls can be stacked for easy storage. 1" trim in 10' lengths also Catalog Put
available in bundles of 200'. Sold by the foot. Number Color Size Up
Roll
*>ÃVÌÀÊÉʸ¸Ê/À
iÜiÌi Dispenser Reel
/
iÊ
ʸViÀ¸ÊiÌÌiÀÊÌÀÊÌÊÃÊÛiÀÞÊÕÃivÕÊvÀÊÌV
}ÊÌÀÊi`ÃÊÌÊ>ÜÊ>ÊÃÌ
]ÊÕvÀÊLi`°ÊÊ,i`iÃ}i`ÊL>`iÊ>`Ê
anvil allows a strong, dependable cut.
Wagner powerful handle magnets are ideal for holding Jewelite trim and other letter trim in position during assembly. Available in
xÊÃÌÞiÃÊÜ
V
ÊÀi`ÕViÊ>ÃÃiLÞÊÌiÊÊÌ
iÊÃ
«°ÊÊ*iÀ>iÌÊ>}iÌÃÊ}Õ>À>Ìii`°
Catalog Dimensions (Inches)
Number Description Length Ext. Side Lt. Width Magnet Ht. Handle Ht. Total Ht.
AME-NIC Letter Trim Tool - - - - - -
WAG-25# >}iÌÊÜÉÓxÊLðÊ*ÕÊ-ÌÀi}Ì
1 - 3/4 1 1 2
WAG-50# >}iÌÊÜÉxäÊLðÊ*ÕÊ-ÌÀi}Ì
2 - 3/4 1 1 2
WAG-HMC503 >}iÌÊÜÉxäÊLðÊ*ÕÊ-ÌÀi}Ì
]Ê"iÊ
ÝÌi`i`Ê-`i 3-3/8 1 3/4 1 1 2
WAG-HMC503B >}iÌÊÜÉxäÊLðÊ*ÕÊ-ÌÀi}Ì
]Ê"iÊ
ÝÌi`i`Ê-`i 3-1/2 1-1/4 3/4 1 1 2
WAG-HMC504 >}iÌÊÜÉxäÊLðÊ*ÕÊ-ÌÀi}Ì
]Ê/ÜÊ
ÝÌi`i`Ê-`ià 4 1 3/4 1 1 2
AME-NIC
Ê/Ê
Ê
//
,-ÊEÊ 1
,-
Sign Supplies
Change-Ad flat changeable letters have the characters screened on to clear plastic
L>V}ÀÕ`ðÊÊiÌÌiÀÊÃÌÞiÃÊ>Û>>LiÊ>ÀiÊ`iÀ]ÊÊ>`Ê°ÊÊÊV
>À>VÌiÀÃÊ>ÀiÊ
Ì
iÊÃ>iÊ>ÃÊÊLÕÌÊ>ÀiÊÃVÀiii`ÊÌÊ}ÛiÊ>ÊÌ
Àii`iÃ>ÊivviVÌ°ÊÊÛiÊÌ
i>ÌiÀÊ
rating symbols as well as custom word plates are also available. Letters are screened
onto acrylic unless polycarbonate or DR backgrounds are specified. Standard colors
ÃÌi`ÊLiÜ°ÊÊ
ÕÃÌÊVÀÃÊ>ÀiÊ>Û>>LiÊÊ>ÊÃÌÞiðÊÊÊ`iÀÊ
`iÃi`ÊÃÌÞiÊÃÊ
>Û>>LiÊÊÌi`ÊÃâiðÊÊ>ÃÊ«ÀV}ÊÕiÀ>ÃÊ>`ÊÜÀ`«>ÌiÃÊ>ÀiÊ>ÃÊ>Û>>Li°
Catalog Description Standard Styles
Number /Width Colors Modern AD ADM
/
ViÃÃÊvÊ«>ÃÌV\
2" to 10" = .080 12" and up = .100
Also available in .125
ADM Style
Ordering Information
Items with "*" suffix indicates length in feet.
Substitute 8, 10 or 12.
Ê Ê/À>VÊ-«>V}Ê
>ÀÌÊ
Letter Size Visible Opening
Ê ÓÊ Ê Ó£É{¸
Ê ÎÊ Ê Î£É{¸ CHA-RIVET
Ê {Ê Ê {£É{¸
Ê ÈÊ Ê È£É{¸
Ê nÊ Ê £É{¸
Ê £äÊ Ê £££É{¸
Ê £ÓÊ Ê £Î£É{¸
Ê £xÊ Ê £È£É{¸
Ê £ÇÊ Ê £n£É{¸
Ê
Ê
//
,-Ê" /Ê-/
Sign Supplies
Listed are standard font sets of characters. Custom fonts are also available.
"
,
Ê" /Ê(Letters & Numerals Included)
//
,Ê" /Ê(Letters Only)
Total Number of Characters in Set Total Number of Characters in Set
Letter 100 150 200 250 300 350 400 450 500 550 600 Letter 100 150 200 250 300 350 400 450 500 550 600
Wagner Zip-Change® letters are flat, changeable and self spacing. Letters are screened
onto clear acrylic unless high impact is specified. Available in Half-Tone or Solid Stroke
ÃÌÞiðÊÊ Ì
Ê>ÀiÊ>Û>>LiÊÊV`iÃi`ÊÛiÀÃÃÊÜ
V
Ê«iÀÌÊÎä¯ÊÀiÊiÌÌiÀÃÊÊ
>ÊÃ}ÊV«>Ài`ÊÌÊÃÌ>`>À`ÊÜ`Ì
°ÊÊÛiÊÌ
i>ÌiÀÊÀ>Ì}ÊÃÞLÃÊ>ÃÊÜiÊ>ÃÊVÕÃÌÊ
word plates are also available. Word plates of most common commercial words and
>LLÀiÛ>ÌÃÊ>ÀiÊÀi>`ÞÊ>Û>>Li°ÊÊ-Ì>`>À`ÊVÀÃÊ>`ÊÃâiÃÊ>ÀiÊÃÌi`°ÊÊ
ÕÃÌÊVÀÃÊ
>`ÊÃâiÃÊ>ÀiÊ>Û>>LiÊ>ÃÊÜiÊ>ÃÊ}>ÃÊ«ÀV}ÊÕiÀ>ÃÊ>`ÊÜÀ`Ê«>Ìið
Catalog Description Standard Styles
Number /Width Colors >v/iÊ -`Ê-ÌÀiÊ Ê >v/iÊ
`°Ê -`Ê-ÌÀiÊ
`°
Half-Tone Solid Stroke Solid Stroke
Red, (2) Condensed
ZIP-4 4" Character Letter X X - -
ZIP-6 ȸÊ
>À>VÌiÀÊiÌÌiÀÊ >V]
Ê 8Ê 8Ê (2) X (1)
X (1)
7
,Ê<*Ê
ÊEÊ
-" Ê
//
,-Ê" /Ê-/
Listed are standard font sets of characters. Custom fonts are also available.
"
,
Ê" /Ê(Letters and Numerals Included)
//
,Ê" /Ê(Letters Only)
Total Number of Characters in Set Total Number of Characters in Set
Letter 100 150 200 250 300 350 400 450 500 550 600 Letter 100 150 200 250 300 350 400 450 500 550 600
Sign Supplies
7>}iÀÊ<«ÊÌÀ>VÊÃÊ>Õv>VÌÕÀi`ÊvÀÊ,Ê>VÀÞV°ÊÊÌÊV>ÊLiÊ
installed with nylon rivets or plastic cement. Available in 8',
10' and 12' lengths. Sold by the foot.
Change-Ad letter changers are stocked but various Wagner letter
changers are also available by special order. Letter Changer
Nylon rivets are recommended for fastening track to sign faces.
To fasten track to .125 background, drill .191 diameter hole. To
fasten track to .250 background, drill .219 diameter hole.
iÌÌiÀÊ-ÌÀ>}iÊ
>LiÌ
Convenient, lightweight and portable letter storage cabinets keep
iÌÌiÀÃÊÃ>viÊ>`ÊÀ}>âi`ÊÜ
iÊÌÀ>ëÀÌ}ÊÀÊÜ
iÊÌÊÊÕÃi°
Catalog
Number Description
ZIP-531
ZIP-PT- * Zip Clear Top Track
ZIP-PB- * <«Ê
i>ÀÊ ÌÌÊ/À>V Ê Ê/À>VÊ-«>V}Ê
>ÀÌÊ
ZIP-PM- * <«Ê
i>ÀÊÕÌÕ>Ê/À>V Letter Size Visible Opening
CHA-612 iÌÌiÀÊ
>}iÀÊÜÉÈ¿£Ó¿Ê*i Ê ÎÊ Ê Î£É{¸
CHA-618 iÌÌiÀÊ
>}iÀÊÜÉÈ¿£n¿Ê*i Ê {Ê Ê {£É{¸
CHA-824 iÌÌiÀÊ
>}iÀÊÜÉn¿Ó{¿Ê*i Ê ÈÊ Ê È£É{¸
ZIP-531 Large Nylon Rivet Ê nÊ Ê £É{¸
Ê £äÊ Ê £££É{¸
ZIP-46CAB -ÌÀ>}iÊ
>LiÌÊvÀÊÎääÊÊ{¸ÊÌÊȸÊiÌÌiÀÃ Ê £ÓÊ Ê £Î£É{¸
ZIP-8CAB Storage Cabinet for 300 8" Letters Ê £xÊ Ê £È£É{¸ Ordering Information
ZIP-10CAB Storage Cabinet for 300 10" Letters Ê £ÇÊ Ê £n£É{¸
Items with "*" suffix indicates length in feet.
Substitute 8, 10 or 12.
ACCESSORIES
Wagner dimensional changeable letters have slots which engage
with plasti-bar clear high impact acrylic track. Track eliminates
any chance of the letters shifting. Characters are available in
red or black.
VÀi>ÃiÊÌ
iÊivviVÌÛiiÃÃÊvÊiÛiÀÞÊV
>}i>LiÊV«ÞÊL>À`Ê>`Ê Close-up of how letter
marquee with long lasting Wagner letters. Continued product >ÌÌ>V
iÃÊÌÊÌÀ>V
improvement has resulted in a thicker, more brilliant, changeable
letter. To attract even more attention to your copy board display,
ÕÃiÊ `vviÀiÌÊ VÀÊ >`Ê ÃâiÊ VL>ÌÃ°Ê Ê *ÀViÃÊ ÀÊ «À`ÕVÌÊ
>iÃÊVÕ`ÊLiÊÊiÊVÀÊ>`ÊÃâi]ÊÜ
iÊÌ
iÊL>>ViÊvÊÌ
iÊ
copy is in another.
/
iÊL>VÊiÌÌiÀÊÊ>ÊÃâiÃÊÃÊÀiÊÌ
>Ê`ÕÀ>Li]ÊÌ¿ÃÊÕÃÌÊ>LÕÌÊ
«ÃÃLiÊÌÊLÀi>°ÊÊ/
iÊ{¸]Êȸ]Ên¸Ê>`Ê£ä¸Ê>ÀiÊ}Õ>À>Ìii`Ê
for 3 years. No other changeable letters available are as sturdy
or as easily readable because of the deep return or wide stroke
and matte finish of the standard Wagner letter. Letter Changer Lengths
Pole Length To Reach
>Õv>VÌÕÀi`ÊvÀÊÕÌ`ÀÊ}À>`i]Ê
}
Ê«>VÌÊ«>ÃÌV]ÊiÌÌiÀÃÊ ÈÊiiÌ 11 Feet
>ÀiÊ>Û>>LiÊÊ{¸]Êȸ]Ên¸]Ê£ä¸Ê>`ʣǸÊ
i}
Ìð 8 Feet 13 Feet
Letter changers use a mechanical grip to hold letters. 10 Feet 14 Feet
12 Feet 15 Feet
77n
Ê
`ÃÊ ÎääÊ Ê È¸Ê ÀÊ ÓxäÊ Ê n¸Ê ÀÊ £ä¸Ê 7>}iÀÊ 14 Feet £ÈÊiiÌ
`iÃ>ÊiÌÌiÀÃÊÊwÛiÊÃ
iÛiðÊÊi>ÃÕÀiÃÊ{Ó¸ÊÝÊ{Ó¸ÊÝÊ£Î¸Ê £ÈÊiiÌ 18 Feet
and weighs 40 pounds.
Catalog
Number Description
WAG-4-* 4" Dimensional Letter Slotted Letter Changer
WAG-6-* È¸Ê iÃ>ÊiÌÌiÀ
WAG-8-* 8" Dimensional Letter
WAG-10-* 10" Dimensional Letter
WAG-17-* 17" Dimensional Letter
Ordering Information
WAG-P-8 8' Clear Track
Items with "*" suffix indicates color.
WAG-P-10 10' Clear Track
-ÕLÃÌÌÕÌiÊ ÊvÀÊ >V]Ê,ÊvÀÊ,i`°
WAG-SLC-** Slotted Letter Changer
Items with "**" suffix indicates pole length in feet.
WAG-W-8CAB Storage Cabinet for Dimensional Letters
Substitute 6, 8, 10, 12, 14, 16.
ABC
6
/
É
,ÊUÊ
ÊUÊ
//
,-ÊEÊ
--", -
Sign Supplies
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÊ>Ê>ÕÌ
Àâi`Ê`ÃÌÀLÕÌÀÊvÊ>ÊiÊiÌÌiÀÃÊ>`Ê>VViÃÃÀiðÊÊ
Available upon request. Within the complete line of Change-Ad and Wagner letters
and accessories we already offer, any item is readily available.
ABC
Standard
Material / Finishes Description
#10 Satin Brite Aluminum Faces are belt polished to a fine satin finish.
Sides are sandblasted and finished with two
coats of high grade clear lacquer coating.
#20 Acrylic Baked Enamel Two heavy coats of high grade acrylic urethane
ÊÊ i>i°ÊÊ >i`Ê>ÌÊÓääc°
ABC
#30 Satin Alumilite Faces and sides are belt polished to a fine satin
finish then completed with a patented clear
ÊÊ >`âi`ÊwÃ
°
{äÊ
Ài`Ê`VÊÃ
iÃÊ Same as #30 Satin Alumilite except finish
ÊÊ ÌÊLiÊ>VÀ]ÊÕÀ>`VÊÀÊ*iÀ>`VÊÊ}
Ì]
ÊÊ i`ÕÊÀÊ>ÀÊ Àâi]Ê`Ê>`Ê >V°
ÊÊ "/
\ Although anodic finishes
are very durable, variation in color may exist.
#50 Satin Bronze or Yellow Brass Faces are belt polished to a fine satin finish.
Sides are sandblasted and finished with two
coats of high grade clear lacquer coating.
#60 Oxidize Bronze iÌÌiÀÃÊ>ÀiÊÌ
iÊÃ>iÊ>ÃÊxäÊ->ÌÊ Àâi
ÊÊ LÕÌÊ>ÀiÊV
iV>ÞÊÝ`âi`ÊÌÊ>Ê`>À
statuary color, hand rubbed and protected
with two coats of high grade clear lacquer.
/
iÊ/À>ÃVÊ1ÌÀ>Ê6>VÊxÊiÊ«Õ«}ÊÃÞÃÌiÊÃÊ>Ê>Ê*ÞÀiÝÊ}>ÃÃÊ>v`ÊÜ
iÀiÊÌ
iÊ«iÀ>ÌÀÊV>Ê«Õ«ÊvÀÊiÌ
iÀÊÌ
iÊÀ}
ÌÊ>`ÉÀÊivÌÊÃ`i°ÊÊÊ*ÞÀiÝÊ}>ÃÃÊÃÊiÌÀiÞÊ
oven annealed to ensure a stress free glass system with good durability. The modular design is simple to assemble and operate. Uses high vacuum greaseless stopcocks
and o-ring connectors for easy installation. Choice of gas flask or tank connectors. Supplied with 0-40 torr positive pressure gauge. Trap arm has a built-in main stopcock
which allows the manifold to be kept under vacuum even while sealing on neon units prior to processing. Supplied with two Alta Robbins valves for gas metering.
Ordering Information
/,16
x/,Ê1ÌÀ>Ê6>VÊxÊL>ÃiÊÃÞÃÌiÊÃ
ÜÊVÃÃÌÃÊvÊ>Ê>Ê*ÞÀiÝÊ}>ÃÃÊL`Þ]ÊÌÀÀÊ}>Õ}iÊEÊ>LÌÞÊÌÊwÊvvÊvÊiÊÃ`i°ÊÊ*i>ÃiÊëiVvÞÊÀ}
ÌÊÀÊivÌÊ>ÌÊÌiÊvÊÀ`iÀ°
/,
ÊÃÊ>ÊÊiViÃÃ>ÀÞÊViVÌÀÊÌÊvÀÊViVÌ}Ê}>ÃÃÊ}>ÃÊy>ÃÃÊÌÊÌ
iÊÃÞÃÌi°
TRA-96460 Special filling unit is a gas filling connector which enables you to pump up to two tubes simultaneously without the trouble of welding the tubulation.
Simply tighten the cap around the tubulation glass.
Catalog
Number Description
TRA-UVAC5ATR >v`Ê1ÌÀ>Ê6>VÊxÊ >ÃiÊ-ÞÃÌiÊÜÉ/ÀÀÊ>Õ}i
/,
Ê
iVÌÀÊÌÊvÀÊ>ÃÃÊ>ÃÊ>ÃÃ Ultra Vac 5A
Manifold System
TRA-96460 Special Filling Unit
Options
Substitute the TRA-Y-CONN "Y" glass connector in place of the TRA-96460 special filling unit. Pump up to two tubes simultaneously with the need to weld the tubulation.
-ÕLÃÌÌÕÌiÊÌÜÊ/,È{xÇÊ}>ÃÊÌÀ>ÃviÀÊÌ>ÊÃÞÃÌiÃÊÊ«>ViÊvÊÌ
iÊ/,È{äÓÉÈ{££Ê}>ÃÊy>ÃÊViVÌÀÊÌ°ÊÊ/
ÃÊÃÞÃÌiÊi>LiÃÊÞÕÊÌÊÕÃiÊÓxÊÌiÀÊ
Ê}>ÃÊÌ>ÃÊÀÊ£ääÊÌiÀÊ
/À>ÃVÊ}>ÃÊÌ>ÃÊÜÌ
ÊÞÕÀÊÃÞÃÌi°ÊÊ*i>ÃiÊëiVvÞÊÜ
V
ÊÌ>ÊÃâiÊÃÊÌi`i`ÊÌÊLiÊÕÃi`Ê>ÌÊÌiÊvÊÀ`iÀ°
``Ê>ÊiÝÌÀ>ÊÌÀ>«Ê>ÀÊ/,È{Ó{ÊÌÊÞÕÀÊÃÞÃÌiÊÌÊ>iÊ«ÀViÃÃ}Ê«ÃÃLiÊÊLÌ
ÊÃ`iÃÊvÊÞÕÀÊ>v`°ÊÊÊ>``Ì>ÊëiV>Êw}ÊÕÌÊÀʸ9¸Ê}>ÃÃÊViVÌÀÊÜÊLiÊiViÃ-
sary as well.
Catalog
Number Description
TRA-Y-CONN "Y" Glass Connector
TRA-96457 Gas Transfer Tank System
TRA-96424 Extra Trap Arm
Recommended Equipment
TRA-96444 diffusion pump is the most effective method of achieving high-speed pumping below one micron.
Alcatel ALC-UM2015 is an extremely high performance vacuum pump rated at 300 liters per minute. Made for high production neon shops. An ALC-UM2010 pump rated at 200 liters per
minute is also available.
/,nÓ{{äÊ£x6Ê L>À`iÀÊ>`ÊÌ
iÊ/,nÓxÓxÊÃÕ«iÀV
iÊ
>ÃÊ>Ê}`ÊÛÌ>}iÊV>«>VÌÞÊvÀÊÃÌÊ«À`ÕVÌÊÜÀÊ>`Ê>ÊiiVÌÀVÊÀÌ>ÀÞÊ`>ÊÛ>À>VÉV
iÊvÀÊÀiÊ>VVÕÀ>ÌiÊLL>À`-
iÌ°ÊÊ/,nÓ{{xÊÓÓ6ÊLL>À`iÀÊ>`Ê/,nÓxÎäÊÀÌ>ÀÞÊ`>ÊÛ>À>VÉV
iÊÃÊ>Û>>LiÊ>ÃÊÜiÊvÀÊÃ
«ÃÊLL>À`}Ê}iÀÊi}Ì
ÃÊvÊÌÕL}ÊÀÊÜÌ
Ê>ÊL}}iÀÊ"°°Ê`>iÌiÀ°ÊÊÊÛ>À>VÃÊ
sold separately.
Catalog
Number Description
TRA-98040 vvÕÃÊ*Õ«ÊÃÃiLÞ
ALC-UM2015 V>ÌiÊÎääÊ*Ê*Õ«
TRA-82440 £xÊ6Ê L>À`iÀ
TRA-82525 Superchoke DC Controlled Reactance Choke
TRA-84530 Variac only for Superchoke
TRA-84559 ä£äääÊÊ*>iÊÕÌÊiÌiÀ Diffusion Pump
TRA-84542 }Ì>ÊvÀ>Ài`Ê/i«iÀ>ÌÕÀiÊ>Õ}i
TRA-96484 6>VÕÕÊ>Õ}i]Ê££äääÊVÀà Vacuum Pump
Sign Supplies
Cap #18 Threads
MercurÞÊÌiÀÊ
iiÌ
TRA-96427
O-Ring #9 Quad TRA-95826
TRA-96018 Cap #9 Threads
TRA-96429 O-Ring #18 Threads
TRA-96013
TRA-96469
-«iV>Ê}Ê1Ì
(Not shown)
O-Ring #7 Threads TRA-96011
Cap #7 Threads TRA-96407
Ê8U6
Ê86xäÊ
" Ê "Ê-9-/
-
Sign Supplies
¿ÃÊ>ÝU6>VÊ86xäÊiÊ«Õ«}ÊÃÞÃÌiÊÃÊ>`iÊÜÌ
ÊÃ
ÀÌÊi}Ì
ÃÊvÊ
i>ÛÞÊÜ>Ê
50mm diameter borosilicate tubing and welded into a compact configuration which has the
fewest possible number of connections, then annealed to remove strain. The result is a strong
assembly that provides high flow rates, maximum vacuum integrity, minimal gas waste and
easy interior access for cleaning. The two 25mm diameter main stopcocks are large providing
high pumping rates. Uses high vacuum greaseless stopcocks eliminating the contamination
problems associated with lead glass stopcocks found on home made systems.
Cat. No. Cat. No.
Description £Óä6ÊUÊÈäâ (2)Ê ÓÓä6ÊUÊxäâ (2)
System IÊVÕ`iÃ\Ê ÀÃV>ÌiÊ}>ÃÃÊ>v`ÊV«iÌiÊÜÌ
ÃÌÕÀ`ÞÊL>Ãi]Êä{äÊ
}ÉÌÀÀÊwÊ}>Õ}i]Ê
}
ÞÊ>VVÕÀ>Ìi
Û>VÕÕÊ}>Õ}iÊV«iÌiÊÜÌ
Ê}>Õ}iÊ>`>«ÌiÀÉÃÌ«VV]ÊiÜÞ
designed oil diffusion pump (for maximum pumping performance)
complete with heater and all necessary mounting hardware.
Complete system for gas flasks EGL-716000 EGL-716005
Complete system for gas tanks (1) EGL-716010 EGL-716015
System IIÊVÕ`iÃ\Ê->iÊ>ÃÊ-ÞÃÌiÊ]ÊVÕ`}Ê-iÀiÃÊÇäÊÀ
equivalent vacuum pump with stainless steel flex hose and adapter.
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊy>ÃÃÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716025 EGL-716026
Complete system for gas tanks (1)ÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716027 EGL-716028 Standard Maxi-Vac MXV-50 manifold
System IIIÊVÕ`iÃ\Ê->iÊ>ÃÊ-ÞÃÌiÊ]ÊVÕ`}ÊV
ViÊvÊ6 On mounting base with torr gauge, "Y" fitting,
LL>À`iÀÊEÊÛ>À>LiÊÕÌ«ÕÌÊÌÀ>ÃvÀiÀÊV
iÊEÊ>«Ê}>Õ}i° V«iÌiÊÜÌ
ÊÃÌ«VV]Ê>ÀÊ>`ÌÌ>ViÊÛ>ÛiÊ>`ÊÌÜÊ,LLÃÊÛ>Ûið
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊy>ÃÃÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716050 EGL-716051
>`ÊÇ°x6ÊLL>À`iÀÊ>`ÊV
i°
Complete system for gas tanks (1)ÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716052 EGL-716053
>`ÊÇ°x6ÊLL>À`iÀÊ>`ÊV
i°
(3)
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊy>ÃÃÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716075
>`Ê£Ó°x6ÊLL>À`iÀÊ>`ÊV
i° Series A70
Complete system for gas tanks (1)ÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ EGL-716077 (3) Vacuum Pump Specifications
«Õ«Ê>`Ê£Ó°x6ÊLL>À`iÀÊ>`ÊV
i°
ÀiiÊ>ÀÊë>ViiÌ]Ê
ÊÉ°®Ê Ç°äÊ£x®
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊy>ÃÃÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716060 EGL-716061 Ê "Ê
>«>VÌÞÊ £Ê+Õ>ÀÌ
>`Ê£x6ÊLL>À`iÀÊ>`ÊV
i° ÌÀÊ,>Ì}Ê
«ÉÀ«®Ê £ÉÓÊÊ£nää
Complete system for gas tanks (1)ÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716062 EGL-716063 Approximate Weight 55 Lbs.
>`Ê£x6ÊLL>À`iÀÊ>`ÊV
i°
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊy>ÃÃÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716078 (3) 2-stage rotary vane pump which reaches an ultimate vacuum of 1x10-4mbr
>`ÊÓÓ6ÊLL>À`iÀÊ>`ÊV
i° >`Ê
>ÛiÊ-"ÓxÊy>}iÃÊÊiÌÃÊ>`ÊÕÌiÌÃ]ÊVÕ`}Ê>ÌÃÕVL>VÊ
Û>ÛiÃÊ>`ÊÃÊiµÕ««i`ÊÜÌ
Ê*iÕÀ«Êy>}iÃ]Ê
ÃiÊ««i]ÊViÌiÀ}ÊÀ}]Ê
Complete system for gas tanks (1)ÊÜÉ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«Ê EGL-716080 (3)
o-ring and clamp.
>`ÊÓÓ6ÊLL>À`iÀÊ>`ÊV
i°
System IVÊvÀÊ}>ÃÊÌ>ÃÊÞ®ÊVÕ`iÃ\Ê->iÊ>ÃÊ-ÞÃÌiÊ]
plus second Series A70 or equivalent vacuum pump with
stainless steel flexible hose and adapter, two gas tanks systems,
EGL digital temperature gauge, set of replacement "O" rings,
additional 50cc bottle of clear diffusion pump oil, and 100 pairs
vÊn
Ê*,
1Ê*1-ÊiiVÌÀ`ið
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊÌ>ÃÊÜÉÓÊ-iÀiÃÊÇäÊ EGL-716102 EGL-716103
Û>VÕÕÊ«Õ«ÃÊ>`ÊÇ°x6ÊLL>À`iÀÊ>`ÊV
i°
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊÌ>ÃÊÜÉÓÊ-iÀiÃÊÇäÊ EGL-716142 EGL-716143
Û>VÕÕÊ«Õ«ÃÊ>`Ê£Ó°x6ÊLL>À`iÀÊ>`ÊV
i°
«iÌiÊÃÞÃÌiÊvÀÊ}>ÃÊÌ>ÃÊÜÉÓÊ-iÀiÃÊÇäÊ EGL-716162 EGL-716163
Û>VÕÕÊ«Õ«ÃÊ>`Ê£x6ÊLL>À`iÀÊ>`ÊV
i°
(3)
Complete system for gas tanks ÜÉÓÊ-iÀiÃÊÇäÊÛ>VÕÕÊ«Õ«ÃÊ EGL-716164
>`ÊÓÓ6ÊLL>À`iÀÊ>`ÊV
i°
NOTE: (1)Ê>ÃÊÌÀ>ÃviÀÊÃÞÃÌiÃÊVÕ`i`ÊÜÌ
ÊÃÞÃÌiÊ6ÊÞ°ÊÊ(2) 120V refers to all electrical components
except bombarders and chokes (both are 220V primary). (3)Ê ÌÊ>Û>>LiÊvÀÊÓÓä6Éxäâ°
Sign Supplies
A diffusion pump is the most effective method of achieving high-speed
pumping below one micron. Transco's TRA-98040 diffusion pump
VÃÃÌÃÊvÊ>Ê*ÞÀiÝÊ}>ÃÃÊL`ÞÊV«iÌiÊÜÌ
Ê
i>ÌiÀ]Ê>Ìi]ÊÕÌ}Ê
hardware and a 50cc bottle of clear diffusion pump oil. Uses o-ring
Ì
Ài>`i`ÊViVÌÀÃÊÌÊ>ÜÊi>`Ê}>ÃÃÊÌÊ*ÞÀiÝÊ}>ÃÃÊViVÌ°
/,È{n{Ê/iiÛ>VÊ ÓÊÛ>VÕÕÊ}>Õ}iÊ
>ÃÊ>ÊÀi>`}ÊÃV>iÊvÊ£ÊÌÊ
1000 microns. Additionally, the scale includes a red line indicator
which represents 10 (0.01 microns). This gauge offers anti-flashback
V>«>LÌiÃÊLÞÊÌÃÊÕµÕiÊ}ÀÕ`}Êvi>ÌÕÀi°ÊÊÌÊ>ÃÊViÃÊwÌÌi`ÊÜÌ
Ê
>ÊwÌiÀÉÃiÃÀÊVL>ÌÊ`iÃ}i`ÊÌÊÌÀ>«ÊÕÌÊÃ`Ê«>ÀÌViÃÊ>`Ê
condensable gases which may enter the sensor tube and contaminate
the element. The Televac vacuum gauge can be installed on all Ultra-Vac
manifold systems and can be installed on most other manifold systems
(optional adaptor required).
/,È{xxÊ/À>ÃVÊ-6-ÊV>«ÃÕiÊÛ>VÕÕÊ}>Õ}iÊÌÀÀ®ÊÃÊ>ÊiV
>V>Ê
}>Õ}iÊ `iÃ}i`Ê ÌÊ i>ÃÕÀiÊ vÀÊ {äÊ ÌÊ äÊ ÌÀÀ°Ê Ê ÌÊ ÃÊ vÊ ÀÕ}}i`Ê Diffusion Pump
construction suitable for direct or panel mounting and is independent of TRA-98040
barometric pressure. Within the gauge is an evacuated and hermetically
sealed aneroid capsule. Variation of pressure causes deformation
of the capsule and this movement is transferred to the pointer by a
mechanical linkage with a jeweled movement. The pointer indicates
the pressure on a linearly divided scale unaffected by any external
>Ìë
iÀVÊ«ÀiÃÃÕÀi°ÊÊ iV>ÕÃiÊÌ
iÊ}>Õ}iÊ}ÛiÃÊ>Ê`ÀiVÌÊi>ÃÕÀiiÌÊ
of the pressure, it is also unaffected by the composition of the gas used
(i.e., argon, neon, helium, etc.). These features make it much more
>VVÕÀ>ÌiÊÌ
>Ê>ÊÊVÛiÌ>ÊÊ>iÌiÀ°ÊÊiÀVÕÀÞÊÌÕLiÊÀi«>ÀÃÊ
>ÀiÊÌÊÀiVi`i`ÊÊÃÞÃÌiÃÊÕÃ}ÊÌ
ÃÊ}>Õ}i°ÊÊÕÌi`ÊÊ>Ê
stand for ease of installation on a Transco Ultra-Vac manifold or can Vacuum Gauge
be installed on any existing manifold. TRA-96484
Ì
Ê Ì
iÊ
<1
Ê >`Ê Ì
iÊ 9 *Ê >ÀiÊ }>ÃÊ «ÀiÃÃÕÀiÊ Ê
manometers. Gauges give readings of rare gas pressures during the
filling stage of neon processing by the movement of oil in the tube.
9 *ÊÃÊÃÕ««i`ÊÜÌ
Ê>Êw}ÕÀ}ÊÃV>iÊ>`ÊÌ
iÊÀiµÕÀi`Ê>ÕÌÊvÊ
Ài`ÊLÕÌÞÊ«
Ì
>>ÌiÊ°ÊÊ ÀÃV>ÌiÊ}>ÃÃÜÀÊÃÊÕÌi`ÊÊ>ÊÜ`Ê
stand. EGL-EZGAUGE uses a greaseless stopcock and is improved with
borosilicate glasswork that is securely mounted to a rugged stand for
easy attachment to the manifold. Connection is made with a glass
compression fitting that accommodates 12-15mm tubing. Gauge
is suppled with a calibrated scale and required amount of red butyl
phthalate oil.
Catalog Oil Manometer
Number Description Mfg.
TRA-98040 vvÕÃÊ*Õ«Ê-ÞÃÌiÊ /À>ÃV
TRA-96484 6>VÕÕÊ>Õ}i]Ê££äääÊVÀÃÊ /À>ÃV
TRA-96455 0-40 Torr Gauge Transco
EGL-EZGAUGE "Ê>iÌiÀÊ
HYD-BPG "Ê>iÌiÀÊ 6Ì>ÀV
Torr Gauge
TRA-96455
Shown Mounted
Sign Supplies
A breaker bar is put into the inner sealed open end sleeve of a
glass gas flask. When contacted with a magnet, it breaks the
glass seal allowing gas to flow.
Catalog
Number Description
TRA-96454 Ài>iÀÊ >À
MAG-HS8078 ÀÃiÊ-
iÊ>}iÌ
,
1,9ÊUÊg
The finest mercury for use in neon tube fabrication. Triple distilled
to remove all impurities. Supplied in poly-coated glass bottles to
protect against leakage in case of glass fracture.
Sold in 1 pound bottles.
Catalog
Number Description
INT-MERCURY /À«iÊÃÌi`ÊiÀVÕÀÞ]Ê£ÊL°Ê ÌÌi
,
1,9Ê-
/9Ê
--",
-
iÀVÕÀÞÊëÊÌÊÃÊiVV>Ê>`ÊVÌ>ÃÊiÛiÀÞÌ
}Êii`i`ÊÌÊ
>`iÊÃ>ÊiÀVÕÀÞÊVi>Õ«ÃÊÊ>Ê«ÀÌ>LiÊV«>VÌÊÃâi°ÊÊÌÊ
includes one Hg Absorb™ jar, two Hg Absorb™ sponges and one
500g container of Hg Absorb™ powder. Cleans up approximately
1 lb. of spilled mercury.
Catalog
Number Description
INT-MSK iÀVÕÀÞÊ-«ÊÌ
Mercury Spill Kit
MICA
Used for insulating purposes around electrodes during
bombarding.
Catalog
Number Description
MIC-2.5X4 V>]Ê««ÀÝ>ÌiÞÊÓ°x¸ÊÝÊ{¸
CABLE SUPPORTS
Used to run GTO-15 cable in neon installations and provide a wire standoff distance
in accordance with the National Electric Code (NEC).
Catalog Put Weight/100
Number Description Length Up (Lbs.)
WES-CSMS 7
ÌiÊ*ÀVi>]Ê>V
iÊ-VÀiÜÊÕÌi`Ê ÓÊÊ£ÉÓ¸Ê £ääÊ £Ç
TEST CLIPS
nsulators sold separately.
Catalog Clip Jaw Put
Number Description Length Opening Up
SEL-SC27-BX /iÃÌÊ
«Ê ÓÊÊÇÉ£È¸Ê xÉn¸Ê £ä
SEL-SC29B-BX ÃÕ>ÌÀÊvÀÊÓÇÊ >VÊ Ê Ê £ä
SEL-SC29R-BX ÃÕ>ÌÀÊvÀÊÓÇÊ,i`Ê Ê Ê £ä SEL-SC27 SEL-SC45
SEL-SC45-BX *iiÊ7iiÊ/iÃÌÊ
«Ê £ÊÊ£ÉÓ¸Ê xÉ£È¸Ê £ä Shown with Insulator Shown with Insulator
SEL-SC47B-BX ÃÕ>ÌÀÊvÀÊ{xÊ >VÊ Ê Ê £ä
SEL-SC47R-BX ÃÕ>ÌÀÊvÀÊ{xÊ,i`Ê Ê Ê £ä
SEL-SC48B-BX }>ÌÀÊ/iÃÌÊ
«Ê Ó¸Ê £ÉÓ¸Ê £ä
SEL-SC49B-BX ÃÕ>ÌÀÊvÀÊ{nÊ >VÊ Ê Ê £ä
SEL-SC49R-BX ÃÕ>ÌÀÊvÀÊ{nÊ,i`Ê Ê Ê £ä
SEL-SC85-BX
ÀV`iÊ/iÃÌÊ
«Ê ÓÊÊ£Én¸Ê xÉ£È¸Ê £ä SEL-SC48B SEL-SC85
SEL-SC87B-BX ÃÕ>ÌÀÊvÀÊnxÊ >VÊ Ê Ê £ä
SEL-SC87R-BX ÃÕ>ÌÀÊvÀÊnxÊ,i`Ê Ê Ê £ä Shown with Insulator Shown with Insulator
Sign Supplies
These high vacuum stopcocks are suitable for the requirements of
iÊÃ}Ê«Õ«}ÊÃÞÃÌiðÊÊ>`iÊvÊi>`Ê}>ÃðÊ
Ài>ÃiiÃÃÊÃÌ«VVÃÊ>`iÊvÊÃ`>}>ÃÃÊÀÊ*ÞÀiÝÊ>`Ê>VViÃÃÀiÃÊÊ
available upon request.
EGL Hyde
Catalog Number Catalog Number Dimension
EGL-2MM HYD-2MMSLGÊ ÓÊ Ài
EGL-4MM HYD-4MMSLGÊ {Ê Ài
EGL-6MM HYD-6MMSLGÊ ÈÊ Ài
EGL-8MM HYD-8MMSLGÊ nÊ Ài
EGL-10MM HYD-10MMSLGÊ £äÊ Ài
1Ãi`ÊÊÌ
iÊiÊ«ÀViÃÃ}ÊÃÌ>}iÊvÀÊLL>À`}ÊÌÕLiðÊÊÛ>>LiÊÊ>Ê£x6ÊÛiÀÃÊÜ
V
ÊÃÊ
ÃÕÌ>LiÊvÀÊÃÌÊ>««V>ÌðÊÊÊÓÓ6ÊÛiÀÃÊÜ
V
ÊÜÊ
>`iÊ}iÀÊi}Ì
ÃÊ>`Ê>À}iÊ`>iÌiÀÊ
tubing is also available. Superchokes are controlled by an electric rotary dial variac which provides a
`i}ÀiiÊvÊVÌÀÊÛiÀÊÌ
iÊ}>ÃÃÊ>`ÊÌi«iÀ>ÌÕÀiÊiÛiÀÊLivÀiÊ>ÌÌ>>LiÊLÞÊÃ`iL>ÀÊV
iðÊÊÌiÃÊ
ÃÌi`Ê>ÀiÊÈäâ°ÊÊÃÊ>Û>>LiÊÊxäâÊÛiÀÃð
Catalog Line
Number Description Rating Pri. V. Sec. V. Amp.
TRA-82440 L>À`iÀÊ £x6Ê ÓÓäÓÎäÊ Ó{]äääÊ ä
TRA-82525 Superchoke Reactance Choke (1)Ê Ê ä£ÎäÉÓÓäÓÎäÊ Ê x
TRA-82445 L>À`iÀÊ ÓÓ6Ê ÓÓäÓÎäÊ Ó{]äääÊ £Óä L>À`iÀ
TRA-82530 Superchoke Reactance Choke (1)Ê Ê ä£ÎäÉÓÓäÓÎäÊ Ê x
TRA-84530 Electric Rotary Variac for Superchoke 120 - 10
NOTE: (1)
Electric rotary variac sold separately.
Superchoke
With electric rotary variac
Wiring Diagram
ÀÊÃÌ>}ÊÌ
iÊÃÕ«iÀV
iÊLL>À`iÀÊVÌÀÊV
i
WARNING
Not following the wiring diagram may negate warranty.
Sign Supplies
V>ÌiÊ
}
ÊÛ>VÕÕÊ«Õ«ÃÊVLiÊÛ>ÌÛiÊ`iÃ}ÊÜÌ
Ê>LÃÕÌiÊÀi>LÌÞ°ÊÊ>V
}Ê
>`ÊV>ÃÌ}ʵÕ>ÌÞÊVLi`ÊÜÌ
Ê«ÀiVÃÊÌiÀ>ViÃÊ>`Ê>Ê«Ìâi`ÊÕLÀV>ÌÊ
system explains the extremely high performance of Alcatel pumps for applications
which require pumping stability or whenever low ultimate vacuum is desired. Other
advantages are; an efficient, reliable anti-suckback system in the case of a power failure
ÀÊ«Õ«ÊÃ
ÕÌ`Ü]Êi>Ì}
ÌÊV>Ã}Ê>`ÊÃ
>vÌ°ÊÊ*Õ«ÃÊ>ÃÊvi>ÌÕÀiÊÌ
iʵÕiÌiÃÌ]Ê
high performance ventilation system to ensure efficient cooling of the pump with a
minimum of vibration. These pumps can be assembled and disassembled quickly, with
no special tooling required for maintenance and serviceability. Simply follow the steps
of the technical manual supplied with each pump. To facilitate maintenance actions
or routine inspection, the vertical oil sight and the plugs for filling and draining are
VÛiiÌÞÊÛÃLi]ÊV>Ìi`Ê>`Ê>VViÃÃLiÊÊÌ
iÊvÀÌÊvÊÌ
iÊÊV>Ã}°ÊÊ*Õ}ÃÊ>ÀiÊ
made of plastic to prevent burned fingers and filling plug is surrounded by a receptacle
`iÃ}i`ÊÌÊ>VÌÊ>ÃÊ>ÊvÕiÊ«ÀiÛiÌ}ÊyÕ`Êë>}i°ÊÊ>ÞÊ>VViÃÃÀiÃÊ>ÀiÊ>Û>>LiÊ
for Alcatel pumps.
For over 50 years HyVac has been associated with quality products and dependable
service among the vacuum industry. The HyVac 7 is a belt driven, 2 stage pump designed
for economy and durability. Large pump oil reservoirs coupled with relatively slow
«Õ«ÊÀÌÀÊëii`ÃÊiÃÕÀiÃÊ}Ê>`ÊÌÀÕLiÊvÀiiÊ«iÀ>Ì°ÊÊ*Õ«ÃÊ>ÀiÊÕÌi`ÊÊ>Ê
rectangular steel base plate and furnished with a v-belt and belt guard which completely
encloses the belt and pulleys. Supplied with an initial supply of oil, with one extra quart.
"Ì
iÀÊÃâiÃ]ÊÛÌ>}iÃÊ>`Ê>VViÃÃÀiÃÊ>ÀiÊ>ÃÊ>Û>>Li°
Catalog
Number Description Voltage Mfg.
ALC-UM2010 6>VÕÕÊ*Õ«]ÊÓääÊÌiÀÃÊ*iÀÉ°Ê ££xÉÓÎä6ÊxäÉÈäâÊ V>Ìi
ALC-UM2015 6>VÕÕÊ*Õ«]ÊÎääÊÌiÀÃÊ*iÀÉ°Ê ££xÉÓÎä6ÊxäÉÈäâÊ V>Ìi
HYV-91506001 6>VÕÕÊ*Õ«]ʸÞÛ>VÊǸ]Ê£ÉÓÊ«Ê ££x6ÊÈäâÊ ÞÛ>V
ALC-UM2010 ALC-UM2015
Technical Characteristics Unit 50 Hz 60 Hz Technical Characteristics Unit 50 Hz 60 Hz
Free-air displacement m3É
ÊVv®Ê °ÇÊ ££°ÈÊÈ°n® Free-air displacement m3É
ÊVv®Ê £xÊ £nÊ£ä°È®
Ê *iÕÀ«Ê«Õ«}Êëii`Ê 3É
ÊVv®Ê n°xÊ £ä°ÓÊÈ°ä® Ê *iÕÀ«Ê«Õ«}Êëii`Ê 3É
ÊVv®Ê £Ó°xÊ £xÊn°n®Ê
< < < <
Ê 1Ì>ÌiÊ«ÀiÃÃÕÀi\ÊÊÊ>ÀÊiVÌÊ«>ÀÌ>®Ê L>ÀÊ 10 -4 10 -4 Ê 1Ì>ÌiÊ«ÀiÃÃÕÀi\ÊÊÊ>ÀÊiVÌÊ«>ÀÌ>®Ê L>ÀÊ 10 -4 10 -4
< < < <
no air injection (total) mbar 2 x 10 -3 2 x 10 -3 no air injection (total) mbar 1.5 x 10 -3 1.5 x 10 -3
with air injection (total) mbar 10 -2 10 -2 with air injection (total) mbar 10 -2 10 -2
Ê iÌÊ>`ÊiÝ
>ÕÃÌÊy>}iÃÊ 7Ê ÓxÊ Óx Ê iÌÊ>`ÊiÝ
>ÕÃÌÊy>}iÃÊ 7Ê ÓxÊ Óx
Ê >Ý°Ê«iÀÃÃLiÊÜ>ÌiÀÊÛ>«ÀÊ«ÀiÃÃÕÀiÊ L>ÀÊ ÓäÊ £x Ê >Ý°Ê«iÀÃÃLiÊÜ>ÌiÀÊÛ>«ÀÊ«ÀiÃÃÕÀiÊ L>ÀÊ £ÓÊ £ä
Ê 7>ÌiÀÊÛ>«ÀÊ>LÃÀ«ÌÊV>«>VÌÞÊ }É
Ê £ÎäÊ £ää Ê 7>ÌiÀÊÛ>«ÀÊ>LÃÀ«ÌÊV>«>VÌÞÊ }É
Ê ££äÊ £ää
Ê 7i}
ÌÊ}ÊLÃ®Ê Ó{Êx{®Ê Óx°ÓÊxx® Ê 7i}
ÌÊ }ÊLÃ®Ê Óx°xÊÈΰx®Ê Îä°ÎÊÈÇ®
Ê ÌÀÊ 7Ê°*®Ê ä°ÎÇxÊ ä°xÊ£ÉÓ® Ê ÌÀÊ 7Ê°*®Ê ä°xÊ ä°ÈÊÎÉ{®
Ê "ÊV>«>VÌÞÊ Ê ä°xÊ ä°x Ê "ÊV>«>VÌÞÊ Ê ä°xÊ ä°x
Recommended oil (standard condition) Alcatel 100 Alcatel 100 Recommended oil (standard condition) Alcatel 100 Alcatel 100
Ê ÃiÊiÛiÊ>ÃÊ«iÀÊ«iÕÀ«®Ê ` Ê x£Ê xÎ Ê ÃiÊiÛiÊ>ÃÊ«iÀÊ«iÕÀ«®Ê ` Ê xÓÊ xx
HYVAC 7
-«iVwV>ÌÃ
Number of Stages 2
1Ì>ÌiÊ6>VÕÕ]ÊVÀÃÊvÊ}Ê ä°£
Free Air Capacity
Ê ÉÊÊ ÇÊ
ft3ÉÊ Ó°Ç
"ÊÀiµÕÀiiÌÊvÀÊiÊw}ÊÊ ££ÉÓÊ+Õ>ÀÌÃ
Sign Supplies
>ÌÌ
iÜÃÊ £È«>ViÊ `iÕÝiÊ Ý}Ê ÃÞÃÌiÊ Ì>iÃÊ Õ«Ê Catalog Number
ÞÊÃiÛiÊõ°ÊvÌ°ÊLiV>ÕÃiÊÌÊÕÃiÃÊÞÊ£ÈÊL>ÃiÊVÀÃÊ VOC Satin Gloss VOC Full Gloss Non-VOC Satin Gloss Non- VOC Full Gloss Description
ÌÊi>ÃÞÊ>ÌV
ÊÌ
iÊiÌÀiÊ*Ê 1
™ color system 7
ÌiÊ >Ãi
SV-202G VOC-202G MAP-N202G MAP-SOA-202G
or just about any other popular design system colors SV-911G VOC-911G MAP-N911G MAP-SOA-911G 6iÌÊ >Ãi
VÕ`}Ê*-]ÊÃÌ>`>À`ÊÛÞÊ>`Ê«>ÃÌV°ÊÊ1Ã}ÊÞÊ SV-912G VOC-912G MAP-N912G MAP-SOA-912G >ÀÊ >Ãi
£ÈÊ L>ÃiÊ VÀÃÊ Ài`ÕViÃÊ ÛiÌÀÞ°Ê Ê À}}Ê iÝ>VÌÊ SV-913G VOC-913G MAP-N913G MAP-SOA-913G >}iÌ>Ê >Ãi
color matching in-house allows you to mix the precise SV-914G VOC-914G MAP-N914G MAP-SOA-914G >ÀÊ,i`Ê >Ãi
amount as needed. Left-overs and unnecessary gallon SV-915G VOC-915G MAP-N915G MAP-SOA-915G ,i`Ê"Ý`iÊ >Ãi
orders are eliminated. Deluxe mixing station comes SV-917G VOC-917G MAP-N917G MAP-SOA-917G 9iÜÊ"Ý`iÊ >Ãi
complete with electronic timer and stainless steel work SV-920G VOC-920G MAP-N920G MAP-SOA-920G ÕiÊ >Ãi
shelf. Accessories include a sensitive Sartorius scale, a SV-921G VOC-921G MAP-N921G MAP-SOA-921G ÀiiÊ >Ãi
paint shaker, and unique agitator lids for easy mixing, SV-922G VOC-922G MAP-N922G MAP-SOA-922G ÕÀÌÊ1LiÀÊ >Ãi
SV-923G VOC-923G MAP-N923G MAP-SOA-923G >VÊ >Ãi
measuring and pouring. MAP-N925G iÜÊ ÕiÊ >Ãi
SV-925G VOC-925G MAP-SOA-925G
The NUANCE™ color system is the most sophisticated SV-930G VOC-930G MAP-N930G MAP-SOA-930G }
ÌÊ,i`Ê >Ãi
color selection system available. This system helps SV-931G VOC-931G MAP-N931G MAP-SOA-931G Transparent Red Oxide
you simplify and control color and gloss levels. Each of SV-932G VOC-932G MAP-N932G MAP-SOA-932G Transparent Yellow Oxide
the 858 colors are even marked with a light reflective SV-940G VOC-940G MAP-N94OG MAP-SOA-94OG ,i`Ê9iÜÊ >Ãi
SV-942G VOC-942G MAP-N942G MAP-SOA-942G ÀiiÊ9iÜÊ >Ãi
value. The base colors, formula books which provide SV-947G VOC-947G MAP-N947G MAP-SOA-947G -V>ÀiÌÊ >Ãi
the mixing proportions by weight, color selector fans, SV-951G VOC-951G MAP-N951G MAP-SOA-951G i`ÕÊ-ÛiÀÊiÌ>V
a designer's album and an artist's file kit to present SV-952G VOC-952G MAP-N952G MAP-SOA-952G -«>ÀiÊ-ÛiÀÊiÌ>V
the color choices make up this system. SV-953G VOC-953G MAP-N953G MAP-SOA-953G -Õ«iÀÊ-«>ÀiÊ-ÛiÀÊiÌ>V
VOC base colors should be used in almost all locations as SV-954G VOC-954G MAP-N954G MAP-SOA-954G iÊ-ÛiÀÊiÌ>V
colors will meet the air quality standard of 2.8 pounds MAP-SOA-950G ÃÃÊ`wiÀ
VOC per gallon. The non-VOC base colors are available SV-228G Satin Clear Top-Coat
for those areas without environmental VOC restrictions.
Sold by the gallon.
This is a practical and reasonably priced system to install in
the shop allowing one to mix and match custom colors CATALYST
thereby offering a larger choice.
Catalog
MIXING SYSTEMS & ACCESSORIES Number Description
SV-283-320G
>Ì>ÞÃÌÊvÀÊ6"
Ê->ÌÊ*>ÌÃ]Ê>
Catalog SV-283-320Q
>Ì>ÞÃÌÊvÀÊ6"
Ê->ÌÊ*>ÌÃ]Ê+Õ>ÀÌ
Number Description
VOC-283-800G
>Ì>ÞÃÌÊvÀÊÃÃÊ*>ÌÃ]Ê>
MAT-60213 £ÈÊ*>ViÊÝ}Ê-ÞÃÌi VOC-283-800Q
>Ì>ÞÃÌÊvÀÊÃÃÊ*>ÌÃ]Ê+Õ>ÀÌ
MAT-604013 ÎÓÊ*>ViÊÝ}Ê-ÞÃÌi
MAT-639104 Ý}Ê`
/*-Çää£8- iÌÌiÀÊ/i`Ê-V>i
MAT-NCS Nuance Color Selector
MAT-DA Nuance Designer File Case
MAT-NCB Õ>ViÊ
ÀÊ
/* >«ÊÌiÀÝÊÀÕ>Ê
MAT-DAR Designer File Replacement Card
VOC paint is a high solid 2 component acrylic polyurethane. When blended in accordance with instructions, Catalog
it has less than 2.8 pounds VOC per gallon. This unique formulation contains all needed U.V. inhibitors and Number Description
anti-oxidants yet meets the air quality standard of 2.8 pounds maximum allowable VOC per gallon. Colors VOC-281-228G Satin Clear
available in gallon containers. VOC-281-312G i`ÕÊ Àâi
ÝÊÎÊ«>ÀÌÃÊVÀÊÀÊVi>ÀÊÜÌ
ʣʫ>ÀÌÊ6"
ÓnÎnääÊV>Ì>ÞÃÌÊ>`Ê>``Ê6"
Ónx£näÊiÝi«ÌÊÀi`ÕViÀÊ>ÃÊiViÃÃ>ÀÞÊ VOC-281-313G >ÀÊ Àâi
to control viscosity and pot life. No more than 1 quart of exempt reducer may be added per gallon in locations VOC-281-314G Old Copper
Ü
iÀiÊÌ
iÊ>ÝÕÊ>Ü>LiÊ6"
ÊÃÊÓ°nÊ«Õ`ÃÊ«iÀÊ}>°ÊÊÊV>ÌÃÊÜ
iÀiÊÌ
iÊ>ÝÕÊ>Ü>LiÊ VOC-281-335G `VÊ >V
VOC-281-342G ÀÕÃ
i`ÊÕÕ
6"
ÊÃÊΰxÊ«Õ`ÃÊ«iÀÊ}>Ê>ÞÊ«À>VÌV>Ê>ÕÌÊvÊiÝi«ÌÊÀi`ÕViÀÊ>ÞÊLiÊÕÃi`°ÊÊ*ÌÊviÊV>ÊÛ>ÀÞÊvÀÊ VOC-282-202G Natural White
15 minutes to 3 hours depending on temperature and amount of reduction. Adding reducer and lowering VOC-282-204G ÃÃÊ >V
temperature increase pot life. The mixture will be close to ideal spray consistency. VOC-282-208G Clear Gloss
Normal spray paint application equipment can be used, however any aluminum components that contact the paint VOC-282-212G Scarlet Red
VOC-282-214G iÝV>Ê,i`
should be replaced with parts made of steel or stainless steel since the exempt reducer reacts with aluminum and VOC-282-215G ÕÀ}Õ`ÞÊ>À
can cause corrosion. Do not force dry. VOC paints are reactive with atmospheric moisture so it is important to keep VOC-282-216G Nipon Orange
Ì
iÊV>ÃÊÌ}
ÌÞÊVÃi`ÊLiÌÜiiÊÕÃi°ÊÊ/ÀÞÊÌÊÕÃiÊÌ
iÃiÊ«>ÌÃÊÜÌ
ÊÈÊÌ
ÃÊvÊÌ>Ê«i}° VOC-282-217G Citrus Yellow
*Ç{ÇÎ{ÊiÌ>Ê«ÀiÌÀi>ÌiÌÉ>VÌÛ>ÌÀÊÃÊvÀÊÕÃiÊÊVi>]Ê`i}Ài>Ãi`ÊL>ÀiÊÃÌiiÊ>`Ê>ÕÕÊÞ°ÊÊ VOC-282-218G Sundance Yellow
VOC-282-219G
>«ÀÊ Õi
ÌÊ«ÀÛ`iÃÊiÝViiÌÊ>`
iÃÊ>`Ê>``Ì>ÊÀÕÃÌÊ«ÀÌiVÌÊvÊÌ
iÊ«ÀÌiVÌÛiÊV>Ì}ÊÃÊ`>>}i`°ÊÊ/
iÊÌÜÊ VOC-282-222G Emerald Green
V«iÌÃÊ>ÀiÊÝi`Ê£\£ÊÌÊ>iÊ>Ê>ÕÌÊÌ
>ÌÊV>ÊLiÊÕÃi`ÊÊnÊ
ÕÀðÊÊ-«À>ÞÊ>ÊvÕÊÜiÌÊV>ÌÊLÕÌÊÌÊ>Ê VOC-282-224G ,V
Ê ÀÜ
i>ÛÞÊi°ÊÊÃ
ÊV>ÌÊV>ÊLiÊ>««i`ÊÊÓäÊÌÊÎäÊÕÌiðÊÊ iÊÃÕÀiÊÌÊÜ>ÌÊÓ{Ê
ÕÀÃÊLivÀiÊ>Ã}°ÊÊÃ
Ê VOC-282-233G ÀiÊ Õi
V>ÌÊÕÃÌÊLiÊ>««i`ÊLivÀiÊiÝ«Ã}ÊÌ
iÊiÌ>Ê«ÀiÌÀi>ÌiÌÊÌÊÜi>Ì
iÀ°ÊÊ/
iÊ ,
"ÊÃÞÃÌiÊÃÊ>ÊÌ>ÀÃ
Ê VOC-282-245G >}iÌ>
«ÀÌiVÌÊvÀÊLÀ>ÃÃ]ÊLÀâiÊ>`ÊV««iÀ°ÊÊ*Ç{ÇÎÇÊ ,
"Ê«ÀiÌÀi>ÌiÌÊÃÊ>««i`ÊÛiÀÊ*Ç{ÇÎ{ÉÇÎxÊ VOC-282-246G Violet toner
vÜi`ÊLÞÊ6"
ÓnÓÓÈäÊ ,
"ÊVi>À° VOC-282-254G -V
Ê ÕÃÊ9iÜ
VOC-282-256G Rampart Orange
VOC colors have a high gloss finish. Wait 24 hours before judging the gloss level. Add VOC-287-750 exempt VOC-282-259G Federal Green
y>ÌÌi}Ê«>ÃÌiÊÌÊÌ
iÊV>Ì>Þâi`ÊVÀÊÌÊÜiÀÊÌ
iÊ}ÃÃÊiÛi°ÊÊ>ÌÌi}Ê«>ÃÌiÊÃÊÌÊÀiVi`i`ÊvÀÊÌ
iÊ VOC-282-260G À>VÊ
i>À
VOC-281 metallic colors since these colors are manufactured with a low gloss. VOC-286-253G Copper
VOC-286-258G Tucson Gold
VOC-285-900 and VOC 285-101 reducers are not normally used in locations with a 2.8 VOC standard, however, VOC-286-400G À>ÌÊ`
>ÞÊLiÊÕÃi`ÊÊÃ>ʵÕ>ÌÌiÃÊiÃÃÊÌ
>Ê£ÉÓÊ«ÌÊ«iÀÊ}>®ÊÌÊÀiÌ>À`Ê`ÀÞ}Ê>`ÊÃÛiÊ«ÀLiÃÊÃÕV
Ê>ÃÊ VOC-286-401G âÌiVÊ`
"orange peel" and short pot life. VOC-286-402G âÌiVÊ
««iÀ
*ÓÇ{änÉäÊÃÊ>ÊÜ
ÌiÊi«ÝÞÊ«ÀiÀÊÃÞÃÌiÊÜ
V
ÊÃÊÕÃivÕÊvÀÊwÃ
}ÊÌ
iÊÃ`iÊvÊÃ}ÊV>LiÌðÊÊ VOC-274-685G *ÀiÀÊvÀÊÕÕÉ-Ìii
ÝÊÎÊ«>ÀÌÃÊ«ÀiÀÊÌʣʫ>ÀÌÊ
>À`iiÀÊ>`Ê>``Ê>««ÀÝ>ÌiÞÊÓx¯Ê6"
Ónx£näÊiÝi«ÌÊÀi`ÕViÀÊÌÊ>V
iÛiÊ VOC-274-686Q >À`iiÀÊvÀÊ6"
ÓÇ{Ènx
spray consistency and to prolong drying. VOC-283-800* Catalyst
VOC-285-101G Slow Reducer
Small quantities of VOC-281-342 brushed aluminum can be added to give a metallic appearance to other colors. VOC-285-180* Exempt Reducer
VOC-285-900G* Reducer
*Ç{ÇnäÉÇn£Ê
}
ÊLÕ`ÊiÌV
}ÊwiÀÊÃÞÃÌiÊÃÊ>Ê«ÀiÀÉÃÕÀv>ViÊiÌ>Ê«ÀiÌÀi>ÌiÌÊ«ÀÛ`}ÊÃÕ«iÀÀÊ VOC-287-113G Suede Additive
«>ÌÊ>`
iÃÊ>`ÊVÀÀÃÊÀiÃÃÌ>ViÊÜÌ
Êw}Ê«À«iÀÌiðÊÊÌÊV>ÊLiÊÃ>`i`Ê>`ÊÌ«V>Ìi`Ê>vÌiÀÊ£xÊÌÊÎäÊ VOC-287-437P High Solids Accelerator
ÕÌiÃÊ>ÌÊÇäcÊ°ÊÊÝʣʫ>ÀÌÊ>VÌÛ>ÌÀÊÌʣʫ>ÀÌÊwiÀ°ÊÊ
Ãi`Ê«ÌÊviÊÜ
iÊÝi`ÊÃÊÕ«ÊÌÊ£{Ê`>Þð VOC-287-484P High Solids Turbo Enhancer
VOC-287-750G
Ýi«ÌÊ>ÌÌi}Ê*>ÃÌi
VOC-287-950G }
Ê-«ii`Ê>ÌÌi}Ê*>ÃÌi
MAP-74-734G iÌ>Ê*ÀiÌÀi>ÌiÌ
MAP-74-735G VÌÛ>ÌÀÊvÀÊ*Ç{ÇÎ{
MAP-74-737Q À>VÊ*ÀiÌÀi>ÌiÌ
MAP-74-760G *ÀiÀÊvÀÊ*/ÊiÀ
Ordering Information MAP-74-766G */ÊVÌÛ>ÌÀÊvÀÊ*Ç{ÇÈä
MAP-74-777G
Ýi«ÌÊ`
iÃÛiÊ/iÊ `
ÌiÃÊÜÌ
ʸ¸ÊÃÕvwÝÊ`V>ÌiÃÊ}>]ʸ+¸Ê`V>ÌiÃʵÕ>ÀÌ]ʸ*¸Ê`V>ÌiÃÊ«Ì° MAP-74-780G }
Ê Õ`Ê
ÌV
}ÊiÀ
-ÕLÃÌÌÕÌiʸI¸ÊÃÕvwÝÊÜÌ
Ê>ʸ¸ÊvÀÊ}>ÊÀʸ+¸ÊvÀʵÕ>ÀÌ° MAP-74-781G VÌÛ>ÌÀÊvÀÊ*Ç{Çnä
MAP-74-793G -«À>ÞL`Ê*ÀiÀ
MAP-274-228G 7
ÌiÊ*ÀiÀ
MAP-274-229Q >À`iÀÊvÀÊ*ÓÇ{ÓÓn
MAP-274-908G 7
ÌiÊ
«ÝÞÊ*ÀiÀ
MAP-274-909Q >À`iiÀÊvÀÊ*ÓÇ{än
Sign Supplies
*Ê«>ÌÊÃÊ>ÊÓÊ«>ÀÌÊ>VÀÞVÊ«ÞÕÀiÌ
>iÊ«>ÌÊÃÞÃÌiÊvÀÊÕÃiÊÊV>ÌÃÊÜÌ
ÕÌÊ6"
ÊiÛÀiÌ>ÊÀiÃÌÀVÌðÊÊ Catalog
Coverage is approximately 400 square feet per gallon at a 2.0 mil dry film thickness. Number Description
Ýʣʫ>ÀÌÊ*{ÎÓÇäÊV>Ì>ÞÃÌÊÜÌ
ÊÎÊ«>ÀÌÃÊ«>Ì°ÊÊ*ÌÊviÊÃÊ>««ÀÝ>ÌiÞÊnÊ
ÕÀÃÊ>ÌÊÇäc°Ê1«ÊÌÊ£x¯Ê MAP-41-312G i`ÕÊ Àâi
*{xÓäÎÊÀi`ÕViÀÊ>ÞÊLiÊ>``i`ÊÌÊÀi>V
Ê`iÃÀi`ÊëÀ>ÞÊVÃÃÌiVÞ°ÊÊ1ÃiÊ*{xÓ££ÊÃÜÊLÀÕÃ
ÉëÀ>ÞÊ MAP-41-313G >ÀÊ Àâi
Ài`ÕViÀÊÜÌ
ÊÌ
iÊ>`VÊVÀðÊÊÌÊV>Ê>ÃÊLiÊÕÃi`ÊvÊ`ÀÞÊÛiÀëÀ>ÞÊÃÊ>Ê«ÀLi° MAP-41-314G Old Copper
MAP-41-335G `VÊ >V
*ÊVÀÃÊiÝVi«ÌÊiÌ>VîÊ
>ÛiÊ>Ê
}
Ê}ÃÃÊwÃ
°ÊÊ/Êy>ÌÌiÊÌ
iÊ}ÃÃ]Ê>``Ê*{ÇnnnÊy>ÌÌi}Ê MAP-41-342G ÀÕÃ
i`ÊÕÕ
paste. MAP-42-202G Natural White
*ÓÇ{änÉäÊÃÊ>ÊÜ
ÌiÊi«ÝÞÊ«ÀiÀÊÃÞÃÌiÊÜ
V
ÊÃÊÕÃivÕÊvÀÊÌ
iÊÜ
ÌiÊÃ`iÊwÃ
ÊvÊÃ}ÊV>LiÌðÊÊ MAP-42-204G ÃÃÊ >V
ÝÊÎÊ«>ÀÌÃÊ«ÀiÀÊÌʣʫ>ÀÌÊ
>À`iiÀÊ>`Ê>``Ê>««ÀÝ>ÌiÞÊÓx¯ÊÊ*{xääÊÀi`ÕViÀÊÌÊ>V
iÛiÊëÀ>ÞÊ MAP-42-208G Gloss Clear
MAP-42-215G ÕÀ}Õ`Þ
consistency. MAP-42-228G Satin Clear
*Ç{ÇnäÉÇn£Ê
}
ÊLÕ`ÊiÌV
}ÊwiÀÊÃÞÃÌiÊÃÊ>Ê«ÀiÀÉÃÕÀv>ViÀÊiÌ>Ê«ÀiÌÀi>ÌiÌÊÃÞÃÌiÊ«ÀÛ`}Ê MAP-42-260G À>VÊ
i>À
ÃÕ«iÀÀÊ«>ÌÊ>`
iÃÊ>`ÊVÀÀÃÊÀiÃÃÌ>ViÊÜÌ
Êw}Ê«À«iÀÌiðÊÊÌÊV>ÊLiÊÃ>`i`Ê>`ÊÌ«V>Ìi`Ê>vÌiÀÊ MAP-42-900G >ÌÌiÊ
i>À
£xÊÌÊÎäÊÕÌiÃÊ>ÌÊÇäc°ÊÊÝÊ£\£Ê>VÌÛ>ÌÀÊ>`ÊwiÀ°ÊÊ
Ãi`Ê«ÌÊviÊ>vÌiÀÊÝ}ÊÃÊÕ«ÊÌÊ£{Ê`>Þð MAP-43-270* Universal Catalyst
MAP-43-621Q ÀÕÃ
}Ê
>Ì>ÞÃÌ
/
iÊ ,
"ÊÃÞÃÌiÊÃÊÌ>ÀÃ
Ê«ÀÌiVÌÊvÀÊLÀ>ÃÃ]ÊLÀâiÊ>`ÊV««iÀ°ÊÊÀÃÌÊÜ«iÊÃÕÀv>ViÊÜÌ
Ê*Ç{ÇÎÇÊ ,
"Ê MAP-43-999* Slow Catalyst
«ÀiÌÀi>ÌiÌÊvÀÊVi>}É`i}Ài>Ã}]Ê>««ÞÊ*Ç{ÇÎÊëÀ>ÞÊL`ÊvÜi`ÊLÞÊ*{ÓÓÈäÊ ,
"ÊVi>À° MAP-45-203G Spray Reducer
MAP-45-211* ÀÕÃ
É-«À>ÞÊ,i`ÕViÀ
MAP-46-253G Copper
MAP-46-258G Tucson Gold
MAP-46-400G À>ÌÊ`
MAP-46-401G âÌiVÊ`
MAP-46-402G âÌiVÊ
««iÀ
MAP-45-251* ,iÌ>À`iÀÉ,i`ÕViÀ
MAP-47-333Q Anti-Cratering Solution
Ordering Information MAP-47-888* >ÌÌi}Ê*>ÃÌi
ÌiÃÊÜÌ
ʸ¸ÊÃÕvwÝÊ`V>ÌiÃÊ}>]ʸ+¸Ê`V>ÌiÃʵÕ>ÀÌ° MAP-47-444Q ÀÕÃ
}É,}Ê``ÌÛi
MAP-47-474Q Flex Additive
Substitute "*" suffix with container size desired. MAP-74-102G Converter
MAP-74-103G Slow Converter
MAP-74-737Q À>VÊ*ÀiÌÀi>ÌiÌ
MAP-74-780G }
Ê Õ`Ê
ÌV
}ÊiÀ
MAP-74-781G VÌÛ>ÌÀÊvÀÊ*Ç{Çnä
MAP-74-793G -«À>ÞÊ `
MAP-274-908G 7
ÌiÊ
«ÝÞÊ*ÀiÀ
MAP-274-909Q >À`iiÀÊvÀÊ*Ç{än
Number Description
-«À>Þ>ÌÊ>VÀÞÊ{ääÊÃiÀiÃÊ«>ÌÊÃÊvÀÊ>VÀÞV]Ê«ÞV>ÀL>Ìi]Ê -]ÊÃÌÞÀiiÊ>`Ê,]ÊÊLÀ>ÌÊ«iÀ>iÌÊVÀÃÊ
with smooth translucency for illuminated signs. SPR-403W* White
SPR-404W* 7
ÌiÊ Õi7
Ìi®
*>ÌÃÊ>ÀiÊi>`vÀiiÊÕiÃÃÊÌ
iÀÜÃiÊÌi`°ÊÊi>`vÀiiÊ«>ÌÃÊ>ÀiÊ>`>ÌÀÞÊÊ
>vÀ>° SPR-409I* ÛÀÞ
SPR-412Y* ÕÌÌiÀVÕ«Ê(1)
*>ÌÃÊ>ÀiÊÃÕ««i`Ê>ÃÊVViÌÀ>ÌiÃÊ>`ÊÀiµÕÀiÊ`ÕÌÊvÀÊëÀ>Þ}°ÊÊ1Ãiʣʫ>ÀÌÊ«>ÌÊÌÊ£ÊÌÊÓÊ«>ÀÌÃÊÌ
iÀ°ÊÊ SPR-413Y* Daffodil (1)
*À«iÀÊÌ
}ÊÜÊ}ÛiÊ«À«iÀÊVÀÊÌiÃÌÞÊÊ{ÊÌÊxÊ«>ÃÃiÃÊvÊÌ
iÊëÀ>ÞÊ}Õ°ÊÊÓäx/ÊÌ
iÀÊÃÊÕÃi`ÊÜÌ
Ê>Ê SPR-415Y* Lemon Yellow (4-Color) (1)
Ì
iÊ>LÛiÊiÌi`Ê«>ÃÌVÃÊÊÀ>ÊÌi«iÀ>ÌÕÀiÊ>`Ê
Õ`ÌÞ°ÊÊÓ£x/ÊÃÊÕÃi`ÊÜÌ
Ê>Ê«>ÃÌVÃÊÊ
ÌÊ>`ÉÀÊ SPR-421OR* *Õ«Ê(1)
humid conditions. Lower cost thinners 200T (medium) and 201T (fast for cold conditions) are available for SPR-432R* *iÀ>iÌÊ,i`
use with acrylics only. SPR-437R* Unique Red (1)
SPR-447G (2) Unique Red
i>ÀÊ}ÃÃÊ>`ÊVi>ÀÊ>ÌÌiÊ>ÀiÊÝi`ÊÊÌÊÀi`ÕViÊVÀÊÌiÃÌÞ°ÊÊ
i>ÀÊ}ÃÃÊÜÉ16Ê>`ÊVi>ÀÊ>ÌÌiÊÜÉ16Ê SPR-438R* Dark Red (1)
>ÀiÊÕÃi`ÊÛiÀÊiÝÌiÀÀÊ«>ÃÌVÃÊÌÊ`i>ÞÊÞiÜ}°ÊÊ>ÌÌiÊVi>ÀÃÊÃ
Õ`ÊÌÊLiÊÕÃi`ÊÊÌ
iÊwÀÃÌÊÃÕÀv>Vi° SPR-448G (2) Dark Red
Lacryl series 400 is not a VOC compliant coating. SPR-449G (2) Flame Red
SPR-443R* Deep Red
SPR-440M* >}iÌ>
SPR-452BR* *>iÊ ÀÜ
SPR-457BR* ii«Ê ÀÜ
SPR-460B* `}
ÌÊ Õi
Ordering Information SPR-461B* "Vi>Ê Õi
SPR-462B*
>ÀLLi>Ê ÕiÊ{
À®
-ÕLÃÌÌÕÌiʸI¸ÊÃÕvwÝÊÜÌ
ÊVÌ>iÀÊÃâi°Êʸ+¸Ê`V>ÌiÃʵÕ>ÀÌ]ʸ¸Ê`V>ÌiÃÊ}>° SPR-463BG (2) À}
ÌÊ Õi
SPR-470G* Fir Green
SPR-471G* Shamrock Green
SPR-480BK* >VÊ{
À®
SPR-481BK* >VÊ>ÌÌi
SPR-490CL* Clear Gloss
SPR-491CL*
i>ÀÊ>ÌÌi
SPR-498SG* -ÛiÀÊÀ>ÞÊ VÕÌ®
NOTE: (1)
Contains lead.
(2)
Available in gallons only.
Catalog
SPRAYLAT SERIES 20 LACRYL METAL PAINT Number Description
Spraylat Lacryl Series 20 paint is an automotive quality, one-component, acrylic lacquer available in twelve SPR-20-01G Gloss White
ÃÌVÊVÀðÊÊÌÊ>««iÃÊi>ÃÞÊ>`Ê`ÀiÃÊÊÌÜiÌÞÊÕÌiðÊÊ/
iÊwÃ
ÊÃÊ`ÕÀ>LiÊ>`Êv>`iÊÀiÃÃÌ>Ì°ÊÊ7
iÊ SPR-20-313G ΣÎÊÕÀ>`VÊ ÀâiÊ(1)
ÕÃi`ÊÊVÕVÌÊÜÌ
Ê>VÀÞÊ-iÀiÃÊÓäÉÎäÊ7>Ã
Ê*ÀiÀ]Ê-iÀiÃÊÓäÊÜÊ«ÀÛ`iÊÌ
iÊ
}
iÃÌʵÕ>ÌÞÊÀiÃÊ>`Ê SPR-20-313EG ΣÎ
ÊÕÀ>`VÊ ÀâiÊ(1)
«}iÌ°ÊÊ-iÀiÃÊÓäÊiiÌÃÊÀ`ÊÌÀÃÊ>`ÊiiÀ>ÊÌÀÃÊiÝÌiÀÀÊ>VµÕiÀÊëiVwV>ÌðÊÊÌÊÃÊÀiVi`i`Ê SPR-20-80G ÃÃÊ >V
that series 20 colors be reduced up to 20% with 200-T, 201-T Toluene or Xylene; however, reduction will
depend on color. Other colors also available. NOTE: (1)
Contains lead.
Sign Supplies
Number Color
Grip-Flex colors are pure acrylic, translucent, fade resistant and meet ecology requirements. For use on acrylic,
«ÞV>ÀL>Ìi]Ê,]ÊÃÌÞÀii]Ê -]ÊÊ>`ÊyiÝLiÊÛÞ°ÊÊÀ«iÝÊVÀÃÊ>ÞÊLiÊÌiÀÝi`]ÊÕÃi`Ê>ÃÊÌÌÃÊÀÊ £,äÓ£äÈI Cool White
iÝÌi`i`ÊÜÌ
ÊVi>ÀÊÌÊVÀi>ÃiÊÌÀ>ë>ÀiVÞÊÜÌ
ÕÌÊv>`}°ÊÌi`i`ÊvÀÊëÀ>ÞÊ>««V>Ì° £,äÓ£äÈ/I ÕiÊ7
Ìi
£,"Ó££äI }
ÊÌiÃiÞÊ7
Ìi
£,"Ó£äÈ]ÊÊ£,äÓ£äÈ/ÊÊ>`Ê£,äÓ£xÇÊ>ÀiÊ`ÕLiÊVViÌÀ>Ìi`ÊÜ
ÌiÃÊÜ
V
ÊÕÃÌÊLiÊÀi`ÕVi`ʣʫ>ÀÌÊ £,äÓ£xÇI Soft White
paint to 2 parts thinner. All spray colors will normally require 25% to 50% reduction with the correct spray thinner. £,"Ó£näI ÛÀÞ
Viscosity should be checked. Thinner should be added slowly. Ó,äÓΣäI Earth Yellow
Ó,äÓÎÓxI Golden Yellow
10AFR-02200 or 10AFR-02201 may be added to decrease the pigment density and color intensity. 02200 will Ó,äÓÎÓÈI Lemon Yellow
increase the gloss level and 02201 will decrease it. Ó,äÓÎ{ÈI Spring Yellow
Î,äÓxääI >}iÌ>
Ý}ÊÃ
Õ`ÊLiÊ`iÊÜÌ
ÊV«iÌÊÌi«iÀ>ÌÕÀiÃÊ>LÛiÊxäc° Î,äÓxÓÎI >ÀÊ(1)
Î,äÓxÓxI Radiant Red
Î,äÓxÎxI Unique Red
10AFR-02285 is used as an overcoat to provide extra abrasion resistance where necessary. Î,äÓxnÎI Earth Red (1)
10AFR-02201 matte clear should be thoroughly agitated to disperse the heavy solids before use. Whitens after 1 Î,äÓxn{I Cherry Red
Î,äÓxnxI Flame Red
to 2 years when used outdoors. Î,äÓxxI À}
ÌÊ-V>ÀiÌ
T2003 thinner reduces spray Grip-Flex in warm climates. Use with all above noted plastics. {,äÓääI >V
x,äÓΣ£I *««ÞÊ"À>}i
T2004 fast thinner is to reduce spray Grip-Flex in cold or temperate climates and can be used with all above mentioned x,äÓΣxI Citrus Orange
plastics. T2001 fast thinner cannot be used with polycarbonates and is not approved for use in ecologically sensitive x,äÓÎxÇI Sunset Orange
locations. È,äÓÈ£ÎI >ÀÊ ÀÜ
È,äÓÈ{ÓI
>ÀÌ
Ê ÀÜ
/£ääÎÊÌ
iÀÉÀiÌ>À`iÀÊÀi`ÕViÃÊ>`ÊÃÜÃÊÌ
iÊ`ÀÞ}ÊvÊÃVÀii}ÊÀ«iÝ°ÊÊÀÊÕÃiÊÜÌ
Ê>Ê>LÛiÊiÌi`Ê Ç,äÓÇääI Erin Green
plastics. Ç,äÓÇÓäI Hunter Green
n,äÓ{äÎI
>«Ê Õi
/£ää{ÊÌ
iÀÉÀiÌ>À`iÀÊÀi`ÕViÃÊ>`Ê`À>ÃÌV>ÞÊÃÜÃÊÌ
iÊ`ÀÞ}ÊvÊÃVÀii}ÊÀ«iÝ°ÊÊ1ÃivÕÊvÀÊ
ÌÊV>ÌiÃÊ>`Ê n,äÓ{ΣI ,Þ>Ê*ÕÀ«iÊ(1)
large surface areas. For use with all above noted plastics. n,äÓ{ÇäI ,i}>Ê Õi
n,äÓ{näI >ÀV
Ê Õi
/£ääÇÊ>``ÌÛiÊ«ÀÛiÃÊiÛi}]ÊÃÌ«ÃÊLÕLL}Ê>`ÊâiÃÊÌÌ}ÊvÊÃVÀii}ÊÀ«iÝ°ÊÊ1ÃiÊë>À}Þ°ÊÊÀÊ ,äÓnÎnI Aluminum (#2010)
use with all of the above mentioned plastics. £ä,äÓÓääI Clear
£ä,äÓÓä£I >ÌÌiÊ
i>À
T4000 removes Grip-Flex paint from polycarbonate. £ä,äÓÓÈÈI Solar Clear
£ä,äÓÓnxI Tough Coat Clear
£äΣäxäÊ>ÞÊLiÊÝi`Ê£\£ÊÜÌ
ÊëÀ>ÞÊÀ«iÝÊÌÊ«À`ÕViÊ>ÊëÀ>ÞÊÛÃVÃÌÞ]ÊwÃ
ÊvÀÊ>««V>ÌÊÌÊiÌ>ðÊÊ £Ó,äÓÎnÎI `ÊiÌ>V
ÝÊ£\£ÊÜÌ
ÊÃVÀiiÊÀ«iÝÊ>`Ê/£ääÎÊÌ
iÀÊ>``i`ÊÌÊ>`ÕÃÌÊÌÊÌ
iÊ`iÃÀi`ÊÃVÀii}ÊÛÃVÃÌÞ° £Ó,äÓÈÎÓI i`ÕÊ ÀâiÊΣӮ
£Ó,äÓÈÎÎI >ÀÊ ÀâiÊΣή
£Ó,äÓÈ{£I >ÀÊ ÀâiÊΣÎ
®
NOTE: (1)
Special order.
Catalog
Number Description
T2003** Spray Thinner
T2004** Fast Spray Thinner
T2001** Fast Spray Thinner (1)
T1003*** -VÀiiÊ/
iÀÉ,iÌ>À`iÀ
T1004*** Super Retarder
Ordering Information T1007*** Trouble Free Additive
-ÕLÃÌÌÕÌiÊ>Ê>ÃÌiÀÃÊÃÕvwÝiÃÊÜÌ
ÊVÌ>iÀÊÃâiÊ`iÃÀi`\ T4000** ,iÛiÀÊvÀÊ*ÞV>ÀL>Ìi
"L" indicates liter, "G" indicates gallon, "F" indicates 5 gallon pail and "D" indicates 55 gallon drum. 10AHK-31050**
i>ÀÊiÌ>Ê``ÌÛi
Items with "**" suffix indicates items that are not available in liter size. NOTE: (1)
Not for polycarbonate.
Items with "***" suffix indicates items that are only available in 1 gallon and 5 gallon sizes.
iÌ>iÝÊ>VÀÞVÊi>iÃÊ>ÀiÊv>ÃÌÊ`ÀÞ}]Ê`ÕÀ>LiÊ>`Êv>`iÊÀiÃÃÌ>ÌÊwÃ
ÊV>ÌÃÊvÀÊÃÌiiÊ>`Ê>ÕÕ°ÊÊ
Catalog
*>ÌÃÊ>ÀiÊÌÊLiÊÕÃi`ÊÛiÀÊÌ
iÊ>««À«À>ÌiÊ«ÀiÀÊ>ÃÊ`iÃVÀLi`ÊLiÜ°ÊÊÌÊÃÊ«ÀÌ>ÌÊÌ
>ÌÊÌ
iÊiÌ>ÊÃÕÀv>ViÊ Number Description
to be coated is rust and oil free as well as solvent cleaned. Top-coats dry to the touch in 30 minutes and
>V
iÛiÊ>ÝÕÊ
>À`iÃÃÊÊÓ{Ê
ÕÀðÊiÌ>iÝÊÃ
Õ`Ê«ÀÛ`iÊ>ÊÃ>ÌÃv>VÌÀÞÊiÝÌiÀÀÊwÃ
ÊvÀÊÎÊÌÊ 12ALK-31047G `ÊiÌ>V
12ALK-31051G i`ÕÊ ÀâiÊiÌ>VÊÕÀ°ÊΣӮ
5 years on a properly prepared surface. 12ALK-31052G >ÀÊ ÀâiÊiÌ>VÊÕÀ°ÊΣή
To thin use T2003 reducer when temperature is above 70°F and T2001 when temperature is below 12ALK-31053G >ÀÊ ÀâiÊiÌ>VÊÕÀ°ÊΣÎ
®
70°F. 9ALK-31048G ÕÕÊiÌ>VÊÕÀ°ÊÓä£ä®
4ALK-31049G >ÌÊ >VÊÎä¯ÊÃî
{Σä{Êy>ÌÊL>VÊÃÊ>Êv>ÃÌÊ`ÀÞ}]ÊÎä¯Ê}ÃÃ]Ê`ÕÀ>LiÊwÃ
ÊvÀÊ«>Ì}ÊÃ}ÊV>LiÌÃÊ>`Ê«ið 10AHK-31050G
i>ÀÊiÌ>Ê``ÌÛi
£Î£ä{ÈÊÃÊ>Ê}`Ê}iiÀ>Ê«ÕÀ«ÃiÊÜ
ÌiÊ«ÀiÀÊvÀÊÃÌiiÊ>`Ê>ÕÕ°ÊÊÌÊ>ÞÊ>ÃÊLiÊÕÃi`Ê>ÃÊ>Ê 1ALK-31046G 7
ÌiÊ*ÀiÀÉ/«
>Ì
white top-coat inside sign cabinets. T2003G Spray Thinner
T2001G Fast Spray Thinner
iÌ>iÝÊ>ÞÊLiÊvÀVi`Ê`Ài`ÊÀÊL>i`ÊÌÊ«ÀÛiÊ
>À`iÃÃÊ>`Ê`ÕÀ>LÌÞ°
Ordering Information
Suffix indicates container size, "G" indicates gallon, "L" indicates liter.
Other sizes may be available.
Sign Supplies
Number Description
Grip-Gard is a 2 part, fast drying, high gloss coating that provides superior coverage plus excellent weather
ÀiÃÃÌ>Vi°ÊÊÌÊÃÊÃÕÌ>LiÊvÀÊÕÃiÊÊÃÌii]Ê}>Û>âi`ÊÃÌii]Ê>ÕÕ]ÊwLiÀ}>ÃÃ]Ê
>À`L>À`Ê>`Ê«ÞÜ`°ÊÊ 12ALU-43312G i`ÕÊ ÀâiÊÕÀ°ÊΣӮ
£-"/Ê1",
-
/Ê* /- Catalog Catalog
Number Description Number Description
Semi-transparent oil based paints brush easily, have
"
Óää+ Fluorescent Chartreuse "
ÓäÈ+ ÕÀiÃViÌÊ*
good adhesion, are fast drying and have sparkling color "
+ Fluorescent Yellow Orange "
Óän+ ÕÀiÃViÌÊ Õi
clarity. For interior or exterior application by brush, roller "
ÓäÓ+ Fluorescent Orange "
Óä+ Fluorescent Green
ÀÊëÀ>Þ°ÊÊÛ>>LiÊʵÕ>ÀÌÊÃâiÊVÌ>iÀð "
ÓäÎ+ Fluorescent Red Orange "
ÓÓä+ UV Top Coat
"
Óä{+ Fluorescent Red
Sign Supplies
Chromatic Ronan
Ì
Ê
À>ÌVÊ>`Ê,>ÊÕÌ`ÀÊLÕiÌÊVÀÃÊ«ÀÛ`iÊÌ
iÊwiÃÌÊÊ>Ê
}
Ê}ÃÃ]ʵÕVÊ`ÀÞ}]ʵÕ>ÌÞÊ
CHR-21* RON-21* >V
enamel. Dries to a tough, weather resistant, porcelain-like finish which is free from brush marks, laps and
,Ó£I ," Ó£I >ÌÊ >V
imperfections. For use on outdoor advertising bulletin boards, metal highway signs, all types of wood and CHR-100* RON-100* Vermillion
>ÃÌiÊL>À`]ÊiÌ>ÊÃÌÀÕVÌÕÀiÃ]ÊiÌV°ÊiÀ>ÊëÀÌÃÊÃÊÌ
iÊÀiVi`i`ÊÃÛiÌ° CHR-101* RON-101* White
," "Êv>ÃÌ`ÀÞÊLVÕÌÊÜ
ÌiÊ}ÛiÃÊiÝViiÌÊiV>ÌÊVÛiÀ>}iÊÌÊLÃVÕÀiÊ`ÊÕÜ>Ìi`ÊiÌÌiÀ}°ÊÊ
,£ä£I ," £ä£I Flat White
>ÞÊLiÊÌÌi`ÊÜÌ
ÊÕÛiÀÃ>ÊÌÌ}ÊVÀð CHR-102* RON-102* Fire Red
CHR-103* RON-103* Aluminum
," -
ÊÃ}ÊwÃ
}ÊVi>ÀÊ}ÛiÃÊ>ÞÊÃÕÀv>ViÊ>Ê
>À`ÊiÝÌÀ>Ê`ÕÀ>LiÊwÃ
°ÊÊ>ÞÊLiÊëÀ>Þi`ÊÀÊLÀÕÃ
i`Ê CHR-104* RON-104*
À}
ÌÊ,i`
on. CHR-105* RON-105*
Ì>ÌÊ-ÛiÀ
CHR-106* RON-106*
," +£ä£ÊµÕV`ÀÞÊL>V}ÀÕ`Êi>iÊÃÊ>Ê
}
Ê}ÃÃ]Ê`ÕÀ>LiÊi>iÊëiV>ÞÊvÀÕ>Ìi`ÊvÀÊL>V}ÀÕ`Ê CHR-107* RON-107* Carmine
ÜÀ°ÊÊÌÃÊv>ÃÌÊ`ÀÞ}Êi`ÃÊÌÃivÊÌÊëÀ>ÞÊ>««V>ÌÊvÀÊ«À`ÕVÌÊÜÀ°ÊÊ>ÞÊ>ÃÊLiÊLÀÕÃ
i`ÊÀÊÀi`Ê CHR-108* RON-108* Ì>ÌÊ`
on. CHR-114* RON-114* >À
CHR-116* RON-116* i`ÕÊ ÀÜ
," *,Ê*ÀiÊÃÊ>ÊÜ
ÌiÊÌiÀÀÉiÝÌiÀÀÊÜ>ÌiÀÊL>Ãi`Ê>VÀÞVÊ«ÀiÀÊÜÌ
ÊÃÕ«iÀÀÊÃÌ>ÊLV}Ê>`Ê CHR-124* RON-124* ÛÀÞ
VÀÀÃÊ
LÌ}Ê«À«iÀÌiðÊÊÌÊ
>ÃÊiÝViiÌÊ>`
iÃÊÌÊÜ`]Ê>ÕÕ]ÊÛÞ]Ê}>Û>âi`]ÊVVÀiÌi]Ê CHR-130* RON-130* i`ÕÊ"À>}i
plaster, glass, sheetrock and Signfoam. Top-coats can usually be applied in 1 hour. CHR-132* RON-132* *ÀÀÃiÊ9iÜ
All other Chromatic products also available. CHR-134* RON-134* Lemon Yellow
CHR-140* RON-140* Chrome Yellow
CHR-142* RON-142* Light Green
CHR-144* RON-144*
Emerald Green
Ordering Information CHR-148* RON-148*
i`ÕÊÀii
ÌiÃÊÜÌ
ʸ¸ÊÊÃÕvwÝÊ`V>ÌiÃÊ}>]ʸ+¸Ê`V>ÌiÃʵÕ>ÀÌ° CHR-150* RON-150*
CHR-152* RON-152* Dark Green
Substitute "*" suffix with container size desired. CHR-154* RON-154* ÕiÀii
CHR-156* RON-156* }
ÌÊ Õi
CHR-158* RON-158* *ÀViÃÃÊ Õi
CHR-162* RON-162* À>ÌÊ Õi
CHR-166* RON-166* >ÀÊ Õi
CHR-180* RON-180* *ÕÀ«i
>}iÌ>
Light Gray
," /+ >ÌÌi}Ê*>ÃÌi]Ê+Õ>ÀÌ
RON-PRAMETG 7
ÌiÊ6ÞÊ*ÀiÀ]Ê>
RON-QDHHG White Hi-Hide, Gallon
RON-BSTWPG 7
ÌiÊ-Ì/ÌiÊ*ÀiÀ]Ê>
," "I >ÃÌ`ÀÞÊ VÕÌÊ7
Ìi
," -
I Sign Finishing Clear
RON-QD101G +ÕVÀÞÊ7
ÌiÊ >V}ÀÕ`Ê
>i]Ê>°
RON-PRAL*
*ÀiÊ*ÀiÀ
Ordering Information
Substitute "*" suffix with container size desired:
¸¸ÊÊ`V>ÌiÃÊ}>]ʸ+¸Ê`V>ÌiÃʵÕ>ÀÌ°
Tex-Cote® textured coatings provide long life protection and decoration approximating a "stucco" finish to most exterior or interior surfaces. There are separate types
for pressure spray application and for roll-on application. Water based Tex-Cote® has high adhesion and flexibility and is used over wood surfaces and in module type
construction. Estimated coverage is 45 sq. ft. per gallon for 2 coats. Drying times are 48 hours to touch, 24 hours between coats, and 2-3 weeks for final cure. Stir
thoroughly before using. Oil based Tex-Cote® is suitable for almost any substrate in almost any climate and is available upon special order.
Coarse texture, which approximates stucco is normally used in the sign industry. Extra coarse and fine textures are also available. Tex-Cote® is stocked in 5 gallon pails
>`ÊÃÊ>Û>>LiÊÊÎäÊ}>Ê`ÀÕðÊÊiÀ>ÊëÀÌÃÊVi>ÊÕ«ÊÜiÌÊÊL>Ãi`Ê>ÌiÀ>Ê>`ÊÜ>ÌiÀÊVi>ÃÊÕ«ÊÜiÌÊÜ>ÌiÀÊL>Ãi`Ê>ÌiÀ>°Ê1ÃiÊ
ÊvÀÊ`ÀÞÊÊÀÊÜ>ÌiÀÊL>Ãi`Ê
material.
Catalog
Number Description
/
8Èää
*Ó -«À>Þ]Ê*>ÀÊ7
Ìi]Ê7>ÌiÀÊ >Ãi]Ê
>ÀÃi
/
8Èää8
*Ó -«À>Þ]Ê*>ÀÊ7
Ìi]Ê7>ÌiÀÊ >Ãi]Ê
ÝÌÀ>Ê
>ÀÃi
/
8Èää*Ó -«À>Þ]Ê*>ÀÊ7
Ìi]Ê7>ÌiÀÊ >Ãi]Êi
/
8,Èää*Ó ,]Ê*>ÀÊ7
Ìi]Ê7>ÌiÀÊ >Ãi]Ê
>ÀÃi
/
8,Èää Ó ,]Ê >Û>Ê7
Ìi]Ê7>ÌiÀÊ >Ãi]Ê
>ÀÃi
9Ê
""
¿-Ê*1,*"-
Ê- Ê*,
,
Jay Cooke's all-purpose water based sign primer provides the best possible undercoat for a beautiful finish on all wood suitable for sign panel construction, any density
vÊv>É-}v>]Ê"Ê«ÞÜ`]Ê]Ê*6
ÊÀÊÌ
iÀÊ«ÀÕÃÊÃÕÀv>ViÃÊ>`ÊiÌ>Ê>ÃÊÜiÊ>ÃÊÃ>`L>ÃÌi`ÊÃÕÀv>ViðÊÊÌÊÃÊ`ÀiÃÃ]ÊÃ>`ÃÊLi>ÕÌvÕÞ]ÊVi>ÃÊÜÌ
ÊÜ>ÌiÀÊ
and dries in 30 minutes. Offers superb adhesion to either latex or enamel top-coats.
Catalog
Number Description
,
*+ *ÕÀ«ÃiÊ-}Ê*ÀiÀ]Ê+Õ>ÀÌ
,
* *ÕÀ«ÃiÊ-}Ê*ÀiÀ]Ê>
Sign Supplies
*ÀiwÃ
i`Ê
}
ʵÕ>ÌÞÊ>ÕÕÊV°ÊÊ"Ì
iÀÊ}>Õ}iÃ]ÊVÀÃÊ>`ÊÃâiÃÊ>ÀiÊ>ÃÊ>Û>>Li°ÊÊ
Custom colors available upon request.
Catalog Put
Number Color Gauge Width Up
ALL-040-01 ,>ÛiÊ >VÊ °ä{äÊ x°Î¸Ê xää¿
ALL-040-01A ,>ÛiÊ >VÊ °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-040-02 *>ÀÊ7
ÌiÊ °ä{äÊ x°Î¸Ê xää¿
ALL-040-02A *>ÀÊ7
ÌiÊ °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-040-21 ÀâiÊ °ä{äÊ x°Î¸Ê xää¿
ALL-040-21A ÀâiÊ °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-040-603 Hunter Red .040 5.3" 500'
ALL-040-603A Hunter Red .040 5.3" 270'
ALL-040-BGA À}
ÌÊ`Ê`âi`Ê °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-040-HBA iÀÊ ÕiÊ °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-040-MB >ÌÌiÊ >VÊ °ä{äÊ x°Î¸Ê xää¿
ALL-040-MBA >ÌÌiÊ >VÊ °ä{äÊ x°Î¸Ê ÓÇä¿
ALL-8040-01 ,>ÛiÊ >VÊ °ä{äÊ n¸Ê xää¿
ALL-8040-02 *>ÀÊ7
ÌiÊ °ä{äÊ n¸Ê xää¿
ALL-8040-02A *>ÀÊ7
ÌiÊ °ä{äÊ n¸Ê ÓÇä¿
ALL-8040-21 ÀâiÊ °ä{äÊ n¸Ê xää¿
ÕiÊV>ÀLÊ«>«iÀÊÃÊÕÃi`ÊÌÊÌÀ>ÃviÀÊ«>ÌÌiÀÃÊÌÊÜÀ°ÊÊ*ÀiÕÊ}À>`iÊVÀ«À>ÌiÃÊ
an extra heavy ink on to a thicker kraft backing.
Catalog
Number Description
K-50-07 ÕiÊ
>ÀLÊ*>«iÀ
WES-CP-07 ÕiÊ*ÀiÕÊÀ>`iÊ
>ÀLÊ*>«iÀ
MASKING PAPER
Application tape is economical and works well for most masking purposes. Refer
to Application Tape in the Graphics section.
PATTERN PAPER
White meatwrap commonly referred to as "butcher paper" is a high quality 50#
base paper for patterns.
,£ä{Ê«>ÌÌiÀÊ«>«iÀÊ
>ÃÊ>Ê£¸Ê}À`ÊÜÌ
Ê£É{¸Ê«ÌÊ«ÌÃÊÊÇäÊÀ>vÌÊ«>«iÀ°
3050 series white pattern paper is a perforated 20# paper for use in computer
driven plotters.
3000 series white pattern paper is a non perforated 20# paper for use in computer
driven friction plotters.
Catalog Put
Number Description Up
18/50 £n¸Ê7
ÌiÊi>ÌÜÀ>«Ê ££ää¿Ê,
24/50 Ó{¸Ê7
ÌiÊi>ÌÜÀ>«Ê ££ää¿Ê,
36/50 ÎȸÊ7
ÌiÊi>ÌÜÀ>«Ê ££ää¿Ê,
48/50 {n¸Ê7
ÌiÊi>ÌÜÀ>«Ê ££ää¿Ê,
60/50 Èä¸Ê7
ÌiÊi>ÌÜÀ>«Ê ££ää¿Ê,
BAR-104 {n¸ÊÀ>vÌÊ*>«iÀÊÜÉÀ`Ê*>ÌÌiÀÊ ÎÎä¿Ê,
3050-1550-02 £x¸Ê7
ÌiÊ*iÀvÀ>Ìi`Ê*>«iÀÊ xää¿Ê,
3050-1930-02 £¸Ê7
ÌiÊ*iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3050-3030-02 Îä¸Ê7
ÌiÊ*iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3000-2430-02 Ó{¸Ê7
ÌiÊ *iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3000-3030-02 Îä¸Ê7
ÌiÊ *iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3000-3630-02 ÎȸÊ7
ÌiÊ *iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3000-3930-02 θÊ7
ÌiÊ *iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
3000-4830-02 {n¸Ê7
ÌiÊ *iÀvÀ>Ìi`Ê*>«iÀÊ Îää¿Ê,
Sign Supplies
Stabilo grease pencils write well on glass and plastic. The graphite pencil will not
melt and is used by glassblowers to mark bends in neon tubing. Also has many
other uses in the shop.
,Ç{xÊV>ÀiÊÀi`Ê«iVÊ>iÃÊ>Êi>ÃÞÊÌÊÀi>`Ê>ÀÊÊÃ
iiÌÊiÌ>°
Listo grease marking pencils are for general purpose marking. Consists of a
iV
>V>Ê
`iÀÊÜÌ
Ê«ViÌÊV«°ÊÊ>À}Êi>`ÊÀiwÃÊViÊÈÊi>`ÃÊ«iÀÊ«>V>}i°ÊÊ
Lead refills sold in package quantities.
POUNCE WHEELS
>`iÊvÊ}
ÌÊÜi}
ÌÊ>ÕÕ°
Catalog Teeth
Number Dimensions Per Inch
GRI-10 £É{¸Ê>iÌiÀÊ £x
GRI-12 ÇɣȸÊ>iÌiÀÊ £x
-Ê
/,"Ê*"1
ÊÌ
iÊ>ÌiÊ£xä¿ÃÊ-ÊLi}>Ê`iÛi«iÌÊÜÀÊÊ>ÊiiVÌÀVÊ«ÕViÊ>V
iÊ
designed to eliminate the drudgery of hand pouncing sign patterns. The Electro
*ÕViÊÜ>ÃÊwÀÃÌÊÌÀ`ÕVi`ÊÌÊÃ}Ê>iÀÃÊʣȣ°ÊÊ-ViÊÌ
>ÌÊÌiÊÌÊ
>ÃÊLiViÊ
one of the most widely used labor saving tools in the industry.
Save time and money by simply drawing with this electric pencil rather than using
«ÕViÊÜ
iiðÊÊ
Àë]ÊVi>Ê
iÃÊvÊÛ>ÀÕÃÊÃâiÃÊV>ÊLiÊi>ÃÞÊ«ÕVi`ÊÊiÊ
ÀÊ>ÞÊÃ
iiÌÃÊvÊ«>«iÀÊLÞÊëÞÊ>`ÕÃÌ}ÊÌ
iÊÛÌ>}iÊ`>°ÊÊ >VÊÃ>`}ÊÃÊÊ
}iÀÊiViÃÃ>ÀÞÊLiV>ÕÃiÊÌ
iÊ
iVÌÀÊ*ÕViÊvÀÃÊ
iÃÊLÞÊ>VÌÕ>ÞÊi>Ì}Ê
ÕÜ>Ìi`Ê>ÌiÀ>ÊÀ>Ì
iÀÊÌ
>ÊÕÃÌÊ«ÕÃ
}ÊÌÊÕÌÊvÊÌ
iÊÜ>Þ°ÊÊ*>ÌÌiÀÃÊ>ÃÌÊ}iÀÊ
LiV>ÕÃiÊ
iÃÊ>`iÊÜÌ
ÊÌ
iÊ
iVÌÀÊ*ÕViÊ>ÀiÊÀiÊÀiÃÃÌ>ÌÊÌÊÌi>À}ÊÌ
>Ê
conventionally pounced holes.
/
iÊ
iVÌÀÊ*ÕViÊViÃÊV«iÌiÊÜÌ
Ê>ÊÃÌ>`>À`Ê£äÊvÌÊ«ÕViÊVÀ`Ê>`Ê>Ê
`âiÊÀi«>ViiÌÊii`ið
Catalog
Number Description
Ê -
*-, -iÀÊ
iVÌÀÊ*ÕVi
Ê -
*, *ÕViÊ ii`iÃ]Ê*>V>}iÊvÊ£Ó
Ê -
*
", Replacement Cord
À`ÊVÌÀÊÊ}iiÀ>ÊÜÊÀi`ÕViÊÌ
iÊVÃÌÊ>`ÊvÀiµÕiVÞÊvÊiÝÌiÀÀÊ>Ìi>ViÊÌÊLÕ`}ÃÊ>`ÊÃÌÀÕVÌÕÀið
Spaces and surfaces below remain cleaner longer, therefore remain attractive and inviting.
BBG-REPELLER
BBG-2 BBG-1
Top and side profiles Top and side profiles
BIRD REPELLENTS
Ý>ÌiÊÃÌ>iÃÃÊÃÌiiÊii`iÊÃÌÀ«ÃÊ>ÀiÊ>ÊivviVÌÛiÊ>`Ê«iÀ>iÌÊÃÞÃÌiÊvÊLÀ`ÊVÌÀ°ÊÊ*À«iÀÞÊÃÌ>i`]Ê«ÀiÛiÌÃÊÌ
iÊÀÃÌ}Ê>`ÊiÃÌ}ÊvÊ«iÃÌviÀÕÃÊLÀ`ðÊÊ
À`ÃÊ>Û`Ê>}
Ì}ÊÊ Ý>ÌiÊvÀÊÌ
iÊÃ>iÊÀi>ÃÊÌ
>ÌÊ«i«iÊ>Û`ÊÃÌi««}ÊÊÌ>VðÊÊ Ý>ÌiÊÃÊÌÊiÌ
>]ÊLÕÌÊiÝÌÀiiÞÊivviVÌÛi°ÊÊÌÊV>ÊLiÊÃÕVViÃÃvÕÞÊÃÌ>i`Ê
Ê>ÞÊÃ
>«iÃÊ>`ÊÃÕÀv>ViÊ>ÌiÀ>ðÊÊÛ>>LiÊÊ{¿ÊÃÌÀ«Ã]ÊÎÎÉ{¸ÊÜ`iÊLÞÊ{¿Ê
}
°ÊÊ£ÓäÊÃÌ>iÃÃÊÃÌiiÊii`iÃ
>À«Ê«ÌÃÊ«iÀÊvÌÊÜi`i`ÊÌÊ>Ê£É{¸ÊyiÝLiÊL>ÃiÊ
strip in a 180 degree radius. Sold by the foot.
/>}ivÌÊÃÊ>ÊÃvÌÊÃÌVÞÊVi>ÀÊV«Õ`°ÊÊÌÊÀi«iÃÊLÀ`ÃÊÜÌ
ÕÌÊ
>ÀÊLÞÊëÞÊ`ÃVÕÀ>}}ÊLÀ`ÃÊvÀÊÀÃÌ}°ÊÊÛ>>LiÊÊ>ÊVÛiiÌÊ£äÊâ°ÊV>ÕÊÌÕLi°
Catalog Put
Number Description Up Mfgr.
NIXALITE Stainless Steel Spike System 4' Strip Nixalite
TAN-97010 ,i«iiÌÊ £äÊâ°Ê/ÕLiÊ />}ivÌ Nixalite
Tanglefoot
3M ADHESIVE TAPES
Sign Supplies
ÓÎ{ÊÃÊ>Ê
}
ʵÕ>ÌÞ]Ê}iiÀ>Ê«ÕÀ«ÃiÊ>Ã}ÊÌ>«i°
{ääÊ`ÕLiÊv>ViÊÌÃÃÕiÊÌ>«iÊ
>ÃÊÌ
iÊ«À«iÀÊÌ>VÊvÀÊ
`}ÊÃÌ>VÃÊvÊ«>ÃÌVÊÌ}iÌ
iÀÊÜ
iÊVÕÌÌ}Ê`iÌV>ÊV
>À>VÌiÀÃÊÀÊÃ
>«ið
Èää]ÊÈ£äÊÃÊ>Ê
}
ʵÕ>ÌÞÊVi«
>iÊÌ>«i°
nnÊ«ÀiÕÊ}À>`iÊw>iÌÊÌ>«iÊ
>ÃÊ>ÊÛiÀÞÊ
}
ÊÃ
i>ÀÊ>`ÊÌi>ÀÊÃÌÀi}Ì
°ÊÊ}ÊÌÃÊ>ÞÊÕÃiÃ]ÊÌÊÃÊÕÃi`ÊÌÊ
`Ê«>ÃÌVÊÃ
iiÌÃÊÌ}iÌ
iÀÊÜ
iÊLÕÌÌViiÌ}Êi`}ið
ÎÎÓÊ`ÕVÌÊÌ>«iÊÃÊ>ÊÃÛiÀ}À>ÞÊ«>ÃÌVÊV>Ìi`ÊVÌÌÊÌ>«i°ÊÊ1Ãi`ÊÌÊ«ÀiÛiÌÊ}
ÌÊi>ÃÊvÀÊiÃÃÊÌ
>Ê«iÀviVÌÊÌÃÊÊÃ}ÊV>LiÌð
Catalog Put
Number Description Dimensions Up
MMM-234-1/2 >Ã}Ê/>«iÊ £ÉÓ¸ÊÝÊÈäÊ9`Ê £nÉÇÓ
MMM-234-3/4 >Ã}Ê/>«iÊ ÎÉ{¸ÊÝÊÈäÊ9`Ê £ÓÉ{n
MMM-234-1 >Ã}Ê/>«iÊ £¸ÊÝÊÈäÊ9`Ê ÉÎÈ
MMM-234-1.5 >Ã}Ê/>«iÊ ££ÉÓ¸ÊÝÊÈäÊ9`Ê ÈÉÓ{
MMM-234-2 >Ã}Ê/>«iÊ Ó¸ÊÝÊÈäÊ9`Ê ÈÉÓ{
MMM-400-1/2 ÕLiÊ>ViÊ/ÃÃÕiÊ/>«iÊ £ÉÓ¸ÊÝÊÎÈÊ9`Ê £ÓÉÇÓ
MMM-400-3/4 ÕLiÊ>ViÊ/ÃÃÕiÊ/>«iÊ ÎÉ{¸ÊÝÊÎÈÊ9`Ê £ÓÉ{n
MMM-610-1
i«
>iÊ/>«iÊ £¸ÊÝÊÓxÓ¸Ê £ÓÉÎÈ
MMM-600-2
i«
>iÊ/>«iÊ Ó¸ÊÝÊÓxÓ¸Ê £ÓÉÓ{
MMM-898-3/4 >iÌÊ/>«iÊ ÎÉ{¸ÊÝÊÈäÊ9`Ê £ÓÉ{n
MMM-898-1 >iÌÊ/>«iÊ £¸ÊÝÊÈäÊ9`Ê £ÓÉÎÈ
MMM-3939-2 ÕVÌÊ/>«iÊ Ó¸ÊÝÊÈäÊ9`Ê £ÓÉÓ{
Sign Supplies
ÓÇÇ6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Case Weight
Number Voltage mA Amp Amps. L W H Mounting Type (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
7B15N3-CB £x]äääÊ ÎäÊ {xäÊ £°ÈÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
7B12N3-CB £Ó]äääÊ ÎäÊ ÎÈäÊ £°ÎÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
7B09N3-CB ]äääÊ ÎäÊ ÓÇäÊ £°äÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
7B75N3-CB Ç]xääÊ ÎäÊ ÓÓxÊ °näÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
7B06N3-C (1) È]äääÊ ÎäÊ £näÊ °ÈäÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
7B05N3-C (1) x]äääÊ ÎäÊ £xäÊ °xäÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
7B15N6-CB £x]äääÊ ÈäÊ ääÊ Î°ÓxÊ £äÎÉnÊ x£É£ÈÊ x£ÎÉ£ÈÊ ££ÇÉnÊÝÊÎÊ
Ê ÎÈ
7B12N6-CB £Ó]äääÊ ÈäÊ ÇÓäÊ Ó°ÈÊ £äÎÉnÊ x£É£ÈÊ x£ÎÉ£ÈÊ ££ÇÉnÊÝÊÎÊ
Ê ÎÈ
7B09N6-CB ]äääÊ ÈäÊ x{äÊ £°xÊ £äÎÉnÊ x£É£ÈÊ xÊ ££ÇÉnÊÝÊÎÊ
Ê ÎÓ
7B75N6-CB Ç]xääÊ ÈäÊ {xäÊ £°ÈÊ £äÎÉnÊ x£É£ÈÊ xÊ ££ÇÉnÊÝÊÎÊ
Ê ÎÓ
7B06N6-CB È]äääÊ ÈäÊ ÎÈäÊ £°ÎÊ ÎÉ£ÈÊ {xÉ£ÈÊ x£É{Ê £ä££É£ÈÊÝÊÎÊ
Ê ÓÎ
7B05N6-CB x]äääÊ ÈäÊ ÎääÊ £°£Ê ÎÉ£ÈÊ {xÉ£ÈÊ x£É{Ê £ä££É£ÈÊÝÊÎÊ
Ê ÓÎ
NOTE: (1)
Ê1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
«iÃÊÜÌ
Ê1ÊӣȣÊ>`Ê¿ÈÊ >Ì>Ê
iVÌÀVÊ
`i°ÊÊ-ivVÌ>i`ÊÜÌ
Ê`ÃViVÌÊÃÜÌV
°ÊÊ-iÌÀÞÊ-iÀiÃÊ«ÌÌ}ÊV«Õ`Ê«ÀÛ`iÃÊ`ÀiVÌÊV}ÊvÊÌÀ>ÃvÀiÀÊ
}iiÀ>Ìi`Ê
i>ÌÊÌÊÌ
iÊÃÕÀÀÕ`}ʸvÀii>À¸ÊiÛÀiÌ°ÊÊ/À>ÃvÀiÀÊV>ÊLiÊÕÌi`ÊiÌ
iÀÊ
ÀâÌ>ÞÊÀÊÛiÀÌV>ÞÊÌÊwÌÊÕÌ}ÊÀiµÕÀiiÌÃÊÕiÊÌ>Àwi`Ê
ÕÌÃÊÜ
V
ÊV>ÊÞÊLiÊÕÌi`Ê
ÀâÌ>ÞÊÀÊÌ
iÊÜ>ÀÀ>ÌÞÊ>ÞÊLiÊÛ`i`°ÊÊi>ÌÕÀiÃÊLÞ«>ÃÃÊÃÜÌV
ÊvÀÊi>ÃÞÊÌÀÕLiÃ
Ì}]Ê
Ê`>}ÃÃÊ`V>ÌÀÊ>`ÊÃÊy>Ã
>Li]Ê
`>LiÊ>`Ê
>ÃÊ>Ê
}
ÊÀiÃÃÌ>ViÊÌÊÃiÊÀÊÃÕÀ}iÊÊÌ
iÊ«À>ÀÞÊi°ÊÊ/«Ê>`Êi`Ê«>iÃÊ>ÀiÊÀiÛ>LiÊvÀÊi>ÃÞÊÜÀ}Ê>VViÃðÊÊVÕÌÃÊ>ÀiÊ«ÀÛ`i`ÊvÀÊLÌ
Ê
ÃÌ>`>À`ÊV`ÕÌÊ>`ÊÌ
iÊvvÊÃÜÌV
°ÊÊ
>ÃÞÊÌÊÕÃiÊÃivÃÌÀ}ÊV>ÀÀÞÊ
>`iÊ«ÀÛ`i`°ÊÊ>ÞÊ>ÃÊLiÊ>Û>>LiÊÜÌ
ÕÌÊLÞ«>ÃÃÊÃÜÌV
°
£Óä6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
4B15N3-EB £x]äääÊ ÎäÊ {xäÊ Î°nÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B12N3-EB £Ó]äääÊ ÎäÊ ÎÈäÊ Î°äÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B10N3-EB £ä]xääÊ ÎäÊ Î£xÊ Ó°ÈxÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B09N3-EB ]äääÊ ÎäÊ ÓÇäÊ Ó°ÎÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
4B75N3-EB Ç]xääÊ ÎäÊ ÓÓxÊ £°Ê £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
4B06N3-E (1) È]äääÊ ÎäÊ £näÊ £°xÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
4B05N3-E (1) x]äääÊ ÎäÊ £xäÊ £°ÎÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
Ê }
Ê*ÜiÀÊ>VÌÀ
4B15H3-EB £x]äääÊ ÎäÊ ÓxÓÊ Ó°£Ê £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B12H3-EB £Ó]äääÊ ÎäÊ Óä{Ê £°ÇÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B10H3-EB £ä]xääÊ ÎäÊ £Ç{Ê £°{xÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
4B09H3-EB ]äääÊ ÎäÊ £xÈÊ £°ÎÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
4B75H3-EB Ç]xääÊ ÎäÊ £ÓäÊ £°äÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
4B06H3-E (1) È]äääÊ ÎäÊ xÊ °nÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
4B05H3-E (1) x]äääÊ ÎäÊ näÊ °ÇÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
NOTE: (1)
Ê1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
ÓÇÇ6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
7B15N3-EB £x]äääÊ ÎäÊ {xäÊ £°ÈÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
7B12N3-EB £Ó]äääÊ ÎäÊ ÎÈäÊ £°ÎÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
7B10N3-EB £ä]xääÊ ÎäÊ Î£xÊ £°£xÊ £äÇÉnÊ {££ÉÎÓÊ Ç£É£ÈÊ ££ÎÉ{ÊÝÊÓÊ ÓÈ
7B09N3-EB ]äääÊ ÎäÊ ÓÇäÊ £°äÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
7B75N3-EB Ç]xääÊ ÎäÊ ÓÓxÊ ä°nÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £n
7B06N3-E (1) È]äääÊ ÎäÊ £näÊ ä°ÈÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
7B05N3-E (1) x]äääÊ ÎäÊ £xäÊ ä°xÊ £äÇÉnÊ ÎxÉnÊ ÈxÉ£ÈÊ ££ÎÉ{ÊÝÊÓÊ £È
NOTE: (1)
Ê1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
Sign Supplies
1ÊӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°
£Óä6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting Housing (lbs.)
4B09N3-H ]äääÊ ÎäÊ ÓÇäÊ Ó°ÎÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Î
4B75N3-H Ç]xääÊ ÎäÊ ÓÓxÊ £°Ê nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Î
4B06N3-H È]äääÊ ÎäÊ £näÊ £°xÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Ó
4B05N3-H x]äääÊ ÎäÊ £xäÊ £°ÎÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Ó
ÓÇÇ6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting Housing (lbs.)
7B09N3-H ]äääÊ ÎäÊ ÓÇäÊ £°äÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Î
7B75N3-H Ç]xääÊ ÎäÊ ÓÓxÊ ä°nÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Î
7B06N3-H È]äääÊ ÎäÊ £näÊ ä°ÈÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Ó
7B05N3-H x]äääÊ ÎäÊ £xäÊ ä°xÊ nxÉnÊ ÎxÉnÊ ÎÇÉ£ÈÊ £É{ÊÝÊÓÊ £ÎÉ{Ê £Ó
- 9"É
*Ê "1- ÊUÊ"1/"",Ê " 7
/
,*,""
1ÊӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°
£Óä6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting Housing (lbs.)
4B05N3-M x]äääÊ ÎäÊ £xäÊ £°ÎÊ x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
4B04N3-M {]äääÊ ÎäÊ £ÓäÊ £°äÊ x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
4B03N3-M Î]äääÊ ÎäÊ xÊ ä°nÊ x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
ÓÇÇ6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Weight
Number Voltage mA Amp Amps. L W H Mounting Housing (lbs.)
7B05N3-M x]äääÊ ÎäÊ £xäÊ °x{Ê x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
7B04N3-M {]äääÊ ÎäÊ £ÓäÊ °{ÎÊ x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
7B03N3-M Î]äääÊ ÎäÊ xÊ °Î{Ê x£ÎÉ£ÈÊ Î£É£ÈÊ Î£ÉnÊ ÈxÉ£ÈÊÝÊÓÊ ££ÉÓÊ Ç
*ÊÌÀ>ÃvÀiÀÃÊ
>ÛiÊÊ>ë
>ÌÊw]ÊÃÌi>`Ê>ÊÌ
iÀÃiÌÌ}ÊV«Õ`Ê«ÞiÃÌiÀÊÀiÃÊw®ÊÜ
V
ÊÜÊÌÊ
i>Ì]ÊÃvÌiÊÀÊyÜÊ>ÌÊiiÛ>Ìi`ÊÌi«iÀ>ÌÕÀiðÊÊ
V>Ãi`Ê
in a one-piece, seamless deep drawn can and pre-engineered to perform well under less than ideal conditions such as poorly ventilated areas, long runs of GTO-15 and
iÌ>ÊV`ÕÌ°ÊÊ`Ê«ÌÊ}ÀÕ`Ê>`ÊL>>Vi`ÊÃiV`>ÀÞ°Ê
Ý«ÀÌÊ`iÃÊ>ÀiÊÌÊ1ÊÃÌi`°ÊÊ"Ì
iÀÊÛ>À>ÌÃÊ>ÃÊ>Û>>Li°
£ää6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Case Weight
Number Voltage mA Amp Amps. L W H Mounting Type (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
EX100B15N £x]äääÊ ÎäÊ {xäÊ Î°nÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
EX100B12N £Ó]äääÊ ÎäÊ ÎÈäÊ Î°äÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
EX100B09N ]äääÊ ÎäÊ ÓÇäÊ Ó°ÎÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX100B75N Ç]xääÊ ÎäÊ ÓÓxÊ £°Ê n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX100B06N È]äääÊ ÎäÊ £näÊ £°xÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
EX100B05N x]äääÊ ÎäÊ £xäÊ £°ÎÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
ÓÓä6ÊUÊxäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Case Weight
Number Voltage mA Amp Amps. L W H Mounting Type (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
EX220A15N £x]äääÊ ÎäÊ {xäÊ Ó°äÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê Ó{
EX220A12N £Ó]äääÊ ÎäÊ ÎÈäÊ £°ÈÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
EX220A09N ]äääÊ ÎäÊ ÓÇäÊ £°ÓÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX220A75N Ç]xääÊ ÎäÊ ÓÓxÊ £°äÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX220A06N È]äääÊ ÎäÊ £näÊ ä°nÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê £Ó
EX220A05N x]äääÊ ÎäÊ £xäÊ ä°ÇÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
EX220A04N {]äääÊ ÎäÊ £ÓäÊ ä°xxÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££Ê
EX220A03N Î]äääÊ ÎäÊ äÊ ä°{Ê n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
ÓÓä6ÊUÊÈäâÊUÊ`Ê*ÌÊÀÕ`ÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Volt Input Dimensions (Inches) Case Weight
Number Voltage mA Amp Amps. L W H Mounting Type (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
EX220B15N £x]äääÊ ÎäÊ {xäÊ Ó°äÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
EX220B12N £Ó]äääÊ ÎäÊ ÎÈäÊ £°ÈÊ £É£ÈÊ {ÎÉ£ÈÊ xÎÉ£ÈÊ ££É£ÈÊÝÊÓÊ Ê ÓÓ
EX220B09N ]äääÊ ÎäÊ ÓÇäÊ £°ÓÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX220B75N Ç]xääÊ ÎäÊ ÓÓxÊ £°äÊ n£É{Ê ÎxÉnÊ ÎÇÉnÊ nÎÉ{ÊÝÊÓÊ Ê £Î
EX220B06N È]äääÊ ÎäÊ £näÊ ä°nÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê £Ó
EX220B05N x]äääÊ ÎäÊ £xäÊ ä°ÇÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
EX220B04N {]äääÊ ÎäÊ £ÓäÊ ä°xxÊ n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
EX220B03N Î]äääÊ ÎäÊ äÊ ä°{Ê n£É{Ê ÎxÉnÊ Î£É{Ê nÎÉ{ÊÝÊÓÊ Ê ££
Sign Supplies
TRANSFORMER RATINGS APPROXIMATE FEET OF TUBING OPERATED
Based on Average Grade of Tubing
Open-Circuit Short-Circuit Approximate Clear or Fluorescent Red Neon Clear or Fluorescent Mercury Filled Tubes, All Colors.
Secondary Secondary Watts
Voltage Current Consumption TUBE SIZE, MILLIMETERS TUBE SIZE, MILLIMETERS
(Volts) (mA)
25 22 20 18 15 14 13 12 11 10 9 25 22 20 18 15 14 13 12 11 10 9
15,000 ÎäÊ Ó{ÎÊ £äÓÊ nxÊ ÇnÊ ÇÓÊ ÈäÊ x{Ê xäÊ {ÈÊ {ÎÊ {äÊ ÎnÊ £ÓäÊ £ääÊ äÊ näÊ ÇÓÊ ÈxÊ ÈäÊ xxÊ x£Ê {nÊ {x
12,000 ÎäÊ £{Ê ÇÊ ÈÇÊ È£Ê xxÊ {ÈÊ {ÓÊ ÎnÊ ÎxÊ ÎÎÊ Î£Ê ÓnÊ xÊ ÇÊ ÇäÊ ÈÓÊ xxÊ xäÊ {ÈÊ {ÓÊ ÎÊ ÎÇÊ Î{
10,500 ÎäÊ £ÇäÊ ÇÎÊ ÈÓÊ xxÊ {nÊ ÎÊ ÎÈÊ Î{Ê Î£Ê ÓnÊ ÓxÊ ÓÓÊ nnÊ ÇÎÊ ÈÎÊ x{Ê {nÊ {ÎÊ {äÊ ÎÇÊ ÎÎÊ ÎäÊ ÓÇ
9,000 ÎäÊ £{ÈÊ ÈÇÊ xÇÊ {nÊ {äÊ ÎÎÊ ÎäÊ ÓnÊ ÓÈÊ Ó{Ê ÓÎÊ Ó£Ê näÊ ÈÇÊ xxÊ {xÊ {äÊ ÎÈÊ ÎÎÊ Î£Ê ÓÊ ÓnÊ Óx
7,500 ÎäÊ £ÓÓÊ x£Ê {£Ê Î{Ê ÓnÊ ÓÇÊ ÓxÊ ÓÎÊ ÓÓÊ ÓäÊ £Ê £nÊ È£Ê {nÊ ÎÊ ÎxÊ ÎÎÊ ÎäÊ ÓnÊ ÓÈÊ Ó{Ê ÓÎÊ Ó£
È]äää ÎäÊ ÇÊ {äÊ Î{Ê ÓnÊ Ó{Ê ÓÓÊ Ó£Ê £Ê £nÊ £ÈÊ £xÊ £{Ê {nÊ {äÊ ÎÓÊ ÓÊ ÓÇÊ ÓxÊ ÓÎÊ Ó£Ê £Ê £nÊ £Ç
5,000 ÎäÊ n£Ê ÎÎÊ ÓnÊ ÓÎÊ ÓäÊ £nÊ £ÇÊ £xÊ £{Ê £ÎÊ £ÎÊ £ÓÊ {äÊ ÎÎÊ ÓÇÊ Ó{Ê ÓÓÊ ÓäÊ £nÊ £ÇÊ £ÈÊ £xÊ £{
4,000 ÎäÊ ÈxÊ ÓÇÊ ÓÎÊ £Ê £ÇÊ £xÊ £ÎÊ £ÎÊ £ÓÊ ££Ê £äÊ Ê ÎÓÊ ÓÇÊ ÓÓÊ ÓäÊ £nÊ £ÈÊ £xÊ £{Ê £ÎÊ £ÓÊ ££
3,000 ÎäÊ {Ê £ÇÊ £{Ê £ÓÊ ££Ê ££Ê £äÊ Ê nÊ nÊ nÊ ÇÊ ÓÓÊ £nÊ £ÈÊ £{Ê £ÎÊ £ÓÊ ££Ê £äÊ Ê Ê n
Ê,iVi`i`Ê>ÃÊ*ÀiÃÃÕÀi]ÊÉ}Ê ÈÊÊ ÇÊ nÊ nÊ Ê £äÊ £äÊ ££Ê £ÓÊ £ÎÊ £xÊ ÈÊ ÇÊ nÊ nÊ Ê £äÊ £äÊ ££Ê £ÓÊ £ÎÊ £x
«iÃÊÜÌ
Ê1ÊӣȣÊ>`Ê¿ÈÊ >Ì>Ê
iVÌÀVÊ
`i°ÊÊ
µÕ««i`ÊÜÌ
ÊÌÀÕLiÊÃ
Ì}ÊLÞ«>ÃÃÊÃÜÌV
Ê>`ÊVÀÊV
À>ÌVʸ/À
¸ÊÃiÃÀÊ>«Ê`V>ÌÀ°ÊÊ*ÞÒÊ
transformers have no asphalt fill, instead a thermosetting compound (epoxy resin fill) which will not heat, soften nor flow at elevated temperatures. Encased in a
one-piece, seamless deep drawn can and pre-engineered to perform well under less than ideal conditions such as poorly ventilated areas, long runs of GTO-15 and
iÌ>ÊV`ÕÌ°ÊÊ`Ê«ÌÊ}ÀÕ`Ê>`ÊL>>Vi`ÊÃiV`>ÀÞ°ÊÊ}
Ê«ÜiÀÊv>VÌÀÊÛiÀÃÃÊ>ÃÊ>Û>>Li°Ê
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Input Dimensions (Inches) Weight
Number Voltage mA Watts Amps. L W H Mounting (lbs.)
À>Ê*ÜiÀÊ>VÌÀ
NT1512N3G £x]äääÊ ÎäÊ Ó{ÎÊ Î°Ç£Ê £äÇÉnÊ {ÎÉnÊ x£ÉÓÊ ££ÎÉ{ÊÝÊÓ£ÉÓÊ ÓÈ
NT1212N3G £Ó]äääÊ ÎäÊ £{Ê Ó°näÊ £äÇÉnÊ {ÎÉnÊ x£ÉÓÊ ££ÎÉ{ÊÝÊÓ£ÉÓÊ Ó{
NT912N3G ]äääÊ ÎäÊ £{ÈÊ Ó°£ÈÊ ÇÉnÊ ÎxÉnÊ ÎÇÉnÊ £äÎÉ{ÊÝÊÓÊ £È
NT7512N3G Ç]xääÊ ÎäÊ £ÓÓÊ £°ÇäÊ ÇÉnÊ ÎxÉnÊ ÎÇÉnÊ £äÎÉ{ÊÝÊÓÊ £x
NT612N3G(1) È]äääÊ ÎäÊ ÇÊ £°Î{Ê nxÉ£ÈÊ Î£xÉ£ÈÊ Î£ÉÓÊ ÇxÉ£ÈÊÝÊÓÊ ££
NT512N3G(1) x]äääÊ ÎäÊ n£Ê £°ÓäÊ nxÉ£ÈÊ Î£xÉ£ÈÊ Î£ÉÓÊ ÇxÉ£ÈÊÝÊÓÊ £ä
T412 (1),(2) {]äääÊ ÎäÊ ÈxÊ £°£äÊ ÇÎÉ{Ê Î£É{Ê ÓÎÉ{Ê nÎÉ{ÊÝÊÓÊ
T312 (1),(2) Î]äääÊ ÎäÊ {Ê °nÎÊ ÇÎÉ{Ê Î£É{Ê ÓÎÉ{Ê nÎÉ{ÊÝÊÓÊ n
S1512G(2) £x]äääÊ ÈäÊ {nÈÊ n°ÓxÊ ££ÎÉ{Ê {ÎÉ{Ê È£ÉÓÊ £ÓÎÉ{ÊÝÊÓ£ÉÓÊ {£
S1212G(2) £Ó]äääÊ ÈäÊ ÎnÊ È°ÈäÊ £äÎÉ{Ê {£É{Ê xÎÉ{Ê ££ÎÉ{ÊÝÊÊÓ£ÉÓÊ ÎÎ
S912G(2) ]äääÊ ÈäÊ ÓÓÊ {°xÊ £äÎÉ{Ê {£ÉnÊ xÎÉ{Ê ££ÎÉ{ÊÝÊÊÓ£ÉÓÊ Ón
S7512G(2) Ç]xääÊ ÈäÊ Ó{ÎÊ {°£ÎÊ £äÊ {£ÉnÊ x£É{Ê ££ÊÝÊÓ£ÉÓÊ ÓÎ
S612G(2) È]äääÊ ÈäÊ £{Ê Î°ÎäÊ £äÊ {£ÉnÊ {ÎÉ{Ê ££ÊÝÊÓ£ÉÓÊ Ó£
S512G(2) x]äääÊ ÈäÊ £ÈÓÊ Ó°ÇxÊ Ê Î£ÉÓÊ ÎxÉnÊ £äÊÝÊÓÊ £n
S412G(2) {]äääÊ ÈäÊ £ÎäÊ Ó°ÓäÊ Ê Î£ÉÓÊ ÎxÉnÊ £äÊÝÊÓÊ £È
NOTE: (1)
1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°ÊÊ(2) Asphalt Filled
ÓÇÇ6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Input Dimensions (Inches) Weight
Number Voltage mA Watts Amps. L W H Mounting (lbs.)
À>Ê*ÜiÀÊ>VÌÀ
NT1527N3G £x]äääÊ ÎäÊ Ó{ÎÊ £°xÊ £äÇÉnÊ {ÎÉnÊ x£ÉÓÊ ££ÎÉ{ÊÝÊÓ£ÉÓÊ ÓÈ
NT1227N3G £Ó]äääÊ ÎäÊ £{Ê £°£{Ê £äÇÉnÊ {ÎÉnÊ x£ÉÓÊ ££ÎÉ{ÊÝÊÓ£ÉÓÊ Ó{
NT927N3G ]äääÊ ÎäÊ £{ÈÊ ä°nÈÊ ÇÉnÊ ÎxÉnÊ ÎÇÉnÊ £äÎÉ{ÊÝÊÓÊ £È
NT7527N3G Ç]xääÊ ÎäÊ £ÓÓÊ ä°ÇÊ ÇÉnÊ ÎxÉnÊ ÎÇÉnÊ £äÎÉ{ÊÝÊÓÊ £x
NT627N3G (1) È]äääÊ ÎäÊ ÇÊ ä°xÇÊ nxÉ£ÈÊ Î£xÉ£ÈÊ Î£ÉÓÊ ÇxÉ£ÈÊÝÊÓÊ ££
NT527N3G (1) x]äääÊ ÎäÊ n£Ê ä°{Ê nxÉ£ÈÊ Î£xÉ£ÈÊ Î£ÉÓÊ ÇxÉ£ÈÊÝÊÓÊ £ä
T427 (1),(2) {]äääÊ ÎäÊ ÈxÊ ä°{ÇÊ ÇÎÉ{Ê Î£É{Ê ÓÎÉ{Ê nÎÉ{ÊÝÊÓÊ
T327 (1),(2) Î]äääÊ ÎäÊ {Ê ä°ÎÈÊ ÇÎÉ{Ê Î£É{Ê ÓÎÉ{Ê nÎÉ{ÊÝÊÓÊ n
S1527G(2) £x]äääÊ ÈäÊ {nÈÊ Î°xnÊ ££ÎÉ{Ê {ÎÉ{Ê È£ÉÓÊ £ÓÎÉ{ÊÝÊÓ£ÉÓÊ {£
S1227G(2) £Ó]äääÊ ÈäÊ ÎnÊ Ó°nÈÊ £äÎÉ{Ê {£É{Ê xÎÉ{Ê ££ÎÉ{ÊÝÊÊÓ£ÉÓÊ ÎÎ
S927G(2) ]äääÊ ÈäÊ ÓÓÊ Ó°£xÊ £äÎÉ{Ê {£ÉnÊ xÎÉ{Ê ££ÎÉ{ÊÝÊÊÓ£ÉÓÊ Ón
S7527G(2) Ç]xääÊ ÈäÊ Ó{ÎÊ £°ÇnÊ £äÊ {£ÉnÊ x£É{Ê ££ÊÝÊÓ£ÉÓÊ ÓÎ
S627G(2) È]äääÊ ÈäÊ £{Ê £°{ÎÊ £äÊ {£ÉnÊ {ÎÉ{Ê ££ÊÝÊÓ£ÉÓÊ Ó£
S527G(2) x]äääÊ ÈäÊ £ÈÓÊ £°£Ê Ê Î£ÉÓÊ ÎxÉnÊ £äÊÝÊÓÊ £n
S427G(2) {]äääÊ ÈäÊ £ÎäÊ ä°ÈÊ Ê Î£ÉÓÊ ÎxÉnÊ £äÊÝÊÓÊ £È
NOTE: (1)
1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°ÊÊ(2) Asphalt Filled
Sign Supplies
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Input Dimensions (Inches) Weight
Number Voltage mA Watts Amps. L W H Mounting (lbs.)
À>Ê*ÜiÀÊ>VÌÀ
PNT1512N3G £x]äääÊ ÎäÊ Ó{ÎÊ Î°Ç£Ê £äÎÉ{Ê {£É{Ê ÇÊ ££ÎÉ{ÊÝÊÓÊ Ó{
PNT1212N3G £Ó]äääÊ ÎäÊ £{Ê Ó°näÊ £äÎÉ{Ê {£É{Ê ÇÊ ££ÎÉ{ÊÝÊÓÊ ÓÎ
PNT912N3G ]äääÊ ÎäÊ £{ÈÊ Ó°£ÈÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £x
PNT712N3G Ç]xääÊ ÎäÊ £ÓÓÊ £°ÇäÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
PNT612N3G (1) È]äääÊ ÎäÊ ÇÊ £°Î{Ê £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
PNT512N3G (1) x]äääÊ ÎäÊ n£Ê £°ÓäÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
NOTE: (1)
1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
ÓÇÇ6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Current Input Dimensions (Inches) Weight
Number Voltage mA Watts Amps. L W H Mounting (lbs.)
À>Ê*ÜiÀÊ>VÌÀ
PNT1527N3G £x]äääÊ ÎäÊ Ó{ÎÊ £°xÊ £äÎÉ{Ê {£É{Ê ÇÊ ££ÎÉ{ÊÝÊÓÊ Ó{
PNT1227N3G £Ó]äääÊ ÎäÊ £{Ê £°£{Ê £äÎÉ{Ê {£É{Ê ÇÊ ££ÎÉ{ÊÝÊÓÊ ÓÎ
PNT927N3G ]äääÊ ÎäÊ £{ÈÊ ä°nÈÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £x
PNT727N3G Ç]xääÊ ÎäÊ £ÓÓÊ ä°ÇÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
PNT627N3G (1) È]äääÊ ÎäÊ ÇÊ ä°xÇÊ £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
PNT527N3G (1) x]äääÊ ÎäÊ n£Ê ä°{Ê £äÎÉ{Ê ÎxÉnÊ È£É{Ê ££ÎÉ{ÊÝÊÓÊ £{
NOTE: (1)
1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
1ӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°
ÈäâÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Number Line Amp Dimensions (Inches) Weight
Sec. V mA VA
120V 277V 120V 277V Overall Length Width Height Mounting Housing (lbs.)
À>Ê*ÜiÀÊ>VÌÀ
T1512PB T1527PBÊ £x]äääÊ ÎäÊ {xäÊ {°£ÎÊ £°ÇnÊ £££ÉÓÊ £äÊ {ÇÉnÊ ÎÇÉnÊ £ä£ÎÉ£ÈÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ Ó£
T1212PB T1227PBÊ £Ó]äääÊ ÎäÊ ÎÈäÊ Î°ÎÊ £°{ÎÊ £££ÉÓÊ £äÊ {ÇÉnÊ ÎÇÉnÊ £ä£ÎÉ£ÈÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ £
T912PB T927PBÊ ]äääÊ ÎäÊ ÓÇäÊ Ó°{nÊ £°äÇÊ £äÊ nÎÉ{Ê ÎxÉnÊ Î£É{Ê ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê £Î
T7512PB T7527PBÊ Ç]xääÊ ÎäÊ ÓÓxÊ Ó°äÈÊ ä°nÊ £äÊ nÎÉ{Ê ÎxÉnÊ Î£É{Ê ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê ££
T612PB T627PBÊ È]äääÊ ÎäÊ £näÊ £°ÈxÊ ä°ÇÓÊ £äÊ nÎÉ{Ê ÎÎÉnÊ ÎÊ ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê £ä
T512PB T527PBÊ x]äääÊ ÎäÊ £xäÊ £°ÎnÊ ä°xÊ £äÊ nÎÉ{Ê ÎÎÉnÊ ÎÊ ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê
T412PB T427PBÊ {]äääÊ ÎäÊ £ÓäÊ £°£Ê ä°{nÊ £äÊ nÎÉ{Ê ÎÎÉnÊ ÎÊ ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê
T312PB T327PBÊ Î]äääÊ ÎäÊ äÊ ä°nÎÊ ä°ÎÈÊ £äÊ nÎÉ{Ê ÎÎÉnÊ ÎÊ ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê n
S1512PB S1527PBÊ £x]äääÊ ÈäÊ ääÊ n°ÓxÊ Î°xnÊ £Î£É{Ê ££ÎÉ{Ê È£ÉnÊ {£ÎÉ£ÈÊ £ÓxÉnÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ În
S1212PB S1227PBÊ £Ó]äääÊ ÈäÊ ÇÓäÊ È°ÈÊ Ó°nÈÊ £Ó£É{Ê £äÎÉ{Ê xÎÉnÊ {ÎÉ£ÈÊ ££É£ÈÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ Îä
S912PB S927PBÊ ]äääÊ ÈäÊ x{äÊ {°xÊ Ó°£xÊ £Ó£É{Ê £äÎÉ{Ê xÎÉnÊ {ÎÉ£ÈÊ ££É£ÈÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ ÓÈ
S7512PB S7527PBÊ Ç]xääÊ ÈäÊ {xäÊ {°£ÎÊ £°ÇnÊ £££É{Ê £äÊ ÎÎÉ{Ê Î£É{Ê £ä££É£ÈÊÝÊÓÊ £ÎÉ{Ê £È
S612PB S627PBÊ È]äääÊ ÈäÊ ÎÈäÊ Î°ÎÊ £°{ÎÊ £££É{Ê £äÊ ÎÎÉ{Ê Î£É{Ê £ä££É£ÈÊÝÊÓÊ £ÎÉ{Ê £x
S512PB S527PBÊ x]äääÊ ÈäÊ ÎääÊ Ó°ÇxÊ £°£Ê £äÊ nÎÉ{Ê Î££É£ÈÊ Î£É{Ê ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê £Î
S412PB S427PBÊ {]äääÊ ÈäÊ Ó{äÊ Ó°ÓÊ ä°ÈÊ £äÊ nÎÉ{Ê Î££É£ÈÊ Î£É{Ê ÇÉ£ÈÊÝÊÓÊ £ÎÉ{Ê £Ó
S312PB S327PBÊ Î]äääÊ ÈäÊ £näÊ £°ÈxÊ ä°ÇÓÊ £äÊ nÎÉ{Ê ÎÎÉnÊ ÎÊ ÎÉnÊÝÊÓÊ £ÎÉ{Ê £ä
}
Ê*ÜiÀÊ>VÌÀ
T1512PBH T1527PBHÊ £x]äääÊ ÎäÊ Ó{ÎÊ Ó°£ÎÊ ä°ÓÊ £Ó£ÉÓÊ ££Ê {ÇÉnÊ ÎÎÉ{Ê ££ÇÉnÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ Ó£
T1212PBH T1227PBHÊ £Ó]äääÊ ÎäÊ £{Ê £°ÇÊ ä°Ç{Ê £Ó£ÉÓÊ ££Ê {ÇÉnÊ ÎÎÉ{Ê ££ÇÉnÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ £
T912PBH T927PBHÊ ]äääÊ ÎäÊ £{ÈÊ £°ÓnÊ ä°xÈÊ £££ÉÓÊ £ä£É{Ê ÎÎÉ{Ê Î£É{Ê £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £Î
T7512PBH T7527PBHÊ Ç]xääÊ ÎäÊ £ÓÓÊ £°äÇÊ ä°{ÈÊ £££ÉÓÊ £ä£É{Ê ÎÎÉ{Ê Î£É{Ê £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £Ó
T612PBH T627PBHÊ È]äääÊ ÎäÊ ÇÊ ä°nxÊ ä°ÎÇÊ £££ÉÓÊ £ä£É{Ê Î£ÉÓÊ ÎÊ £äÇÉnÊÝÊÓÊ £ÎÉ{Ê ££
T512PBH T527PBHÊ x]äääÊ ÎäÊ n£Ê ä°Ç£Ê ä°ÎäÊ £££ÉÓÊ £ä£É{Ê Î£ÉÓÊ ÎÊ £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £ä
T412PBH T427PBHÊ {]äääÊ ÎäÊ ÈxÊ ä°xÇÊ ä°Ó{Ê £££ÉÓÊ £ä£É{Ê ÎÎÉnÊ ÎÊ £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £ä
T312PBH T327PBHÊ Î]äääÊ ÎäÊ {Ê ä°{ÎÊ ä°£Ê £££ÉÓÊ £ä£É{Ê ÎÎÉnÊ ÓÇÉnÊ £äÇÉnÊÝÊÓÊ £ÎÉ{Ê
S1512PBH S1527PBHÊ £x]äääÊ ÈäÊ {nÈÊ {°ÓxÊ £°n{Ê £{£É{Ê £ÓÎÉ{Ê ÈÊ {ÎÉ{Ê £Î£ÉÓÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ {Î
S1212PBH S1227PBHÊ £Ó]äääÊ ÈäÊ ÎnÊ Î°{Ê £°{ÇÊ £Î£É{Ê ££ÎÉ{Ê x£ÉÓÊ {£É{Ê £Ó£ÉÓÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ Î£
S912PBH S927PBHÊ ]äääÊ ÈäÊ ÓÓÊ Ó°xÈÊ £°£äÊ £Î£É{Ê ££ÎÉ{Ê x£ÉÓÊ {£É{Ê £Ó£ÉÓÊÝÊÓ£ÉÓÊ Ó£ÉÓÊ ÓÈ
S7512PBH S7527PBHÊ Ç]xääÊ ÈäÊ Ó{ÎÊ Ó°£ÎÊ ä°ÓÊ £ÓÎÉ{Ê £££ÉÓÊ ÎÎÉ{Ê Î£É{Ê £Ó£É{ÊÝÊÓÊ £ÎÉ{Ê £Ç
S612PBH S627PBHÊ È]äääÊ ÈäÊ £{Ê £°ÇÊ ä°Ç{Ê £ÓÎÉ{Ê £££ÉÓÊ ÎÎÉ{Ê Î£É{Ê £Ó£É{ÊÝÊÓÊ £ÎÉ{Ê £Ç
S512PBH S527PBHÊ x]äääÊ ÈäÊ £ÈÓÊ £°{ÓÊ ä°È£Ê £££ÉÓÊ £ä£É{Ê ÎÎÉ{Ê Î£É{Ê £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £{
S412PBH S427PBHÊ {]äääÊ ÈäÊ £ÎäÊ £°£{Ê ä°{Ê £££ÉÓÊ £ä£É{Ê ÎÎÉ{Ê Î£É{Ê £äÇÉnÊÝÊÓÊ £ÎÉ{Ê £Î
S312PBH S327PBHÊ Î]äääÊ ÈäÊ ÇÊ ä°nxÊ ä°ÎÇÊ £££ÉÓÊ £ä£É{Ê ÎÎÉnÊ ÎÊ £äÇÉnÊÝÊÓÊ £ÎÉ{Ê ££
Sign Supplies
1ӣȣÊV«>Ì°ÊÊÊÌiÀ>ÊÕÌ°ÊÊ-iV`>ÀÞÊi`«ÌÊ}ÀÕ`i`ÊÌÊV>Ãi°
ÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Number Line Amp Dimensions (Inches) Weight
Sec. V mA VA
120V 277V 120V 277V Length Width Height Mounting Housing (Lbs.)
T612PR T627PRÊ È]äääÊ ÎäÊ £näÊ £°ÈxÊ ä°ÇÓÊ ÈÎÉnÊ ÎÉ£ÈÊ ÓÎÉ{Ê ÈÇÉnÊÝÊ£ÎÉ{Ê ££ÉÓÊ n
T512PR T527PRÊ x]äääÊ ÎäÊ £xäÊ £°ÎnÊ ä°xÊ ÈÎÉnÊ ÎÉ£ÈÊ ÓÎÉ{Ê ÈÇÉnÊÝÊ£ÎÉ{Ê ££ÉÓÊ n
T412PR T427PRÊ {]äääÊ ÎäÊ £ÓäÊ £°£Ê ä°{nÊ ÈÎÉnÊ ÎÉ£ÈÊ ÓÎÉ{Ê ÈÇÉnÊÝÊ£ÎÉ{Ê ££ÉÓÊ Ç
T312PR T327PRÊ Î]äääÊ ÎäÊ äÊ ä°nÎÊ ä°ÎÈÊ ÈÎÉnÊ ÎÉ£ÈÊ ÓÎÉ{Ê ÈÇÉnÊÝÊ£ÎÉ{Ê ££ÉÓÊ Ç
PR Series
/, -
"Ê*/Ê"1- Ê/, -",
,-
1ӣȣÊV«>Ì°ÊÊÊÌiÀ>ÊÕÌ°ÊÊ-iV`>ÀÞÊi`«ÌÊ}ÀÕ`i`ÊÌÊV>Ãi°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amp Length Width Height Mounting Housing (Lbs.)
T512PT x]äääÊ ÓxÊ £xäÊ £°ÎÊ xÎÉ{Ê ÓÇÉnÊ ÓÇÉnÊ È£É{ÊÝÊÓÊ ££ÉÓÊ È°xä
T412PT {]äääÊ ÎäÊ £xäÊ £°ÎÊ xÎÉ{Ê ÓÇÉnÊ ÓÇÉnÊ È£É{ÊÝÊÓÊ ££ÉÓÊ È°Óx
T312PT Î]äääÊ ÎäÊ äÊ °Ê xÎÉ{Ê ÓÇÉnÊ ÓÇÉnÊ È£É{ÊÝÊÓÊ ££ÉÓÊ È°Óx
PT Series
/, -
"Ê,
6-
Ê1 "1-Ê/1
Ê""/
Ê
,/
Sign Supplies
1ӣȣÊEÊ
ÊÈääÊV«>Ì°ÊÊ/Ü«>ÀÌÊi«ÝÞÊwÊÜÌ
Ê}À>Õ>ÀÊÃV>ÊvÀÊViÀÊ«iÀ>Ì°Ê
µÕ««i`ÊÜÌ
ÊÌÀÕLiÊÃ
Ì}ÊLÞ«>ÃÃʺÃÜiÀ»ÊLÕÌÌ°ÊÊ
>ÊLiÊÕÃi`ÊÜÌ
Ê
y>Ã
iÀÃ]Ê>>ÌÀÃÊ>`Ê`iÀðÊÊi>ÌÕÀiÃÊÃiV`>ÀÞÊ}ÀÕ`Êv>ÕÌÊ«ÀÌiVÌÊÊ`«ÌÊÀiÌÕÀi`ÊEÊVÛiÌ>ÊÃiÀiÃÊÜÀ}Ê>««V>ÌðÊ
>ÊLiÊVÛiÀÌi`ÊÌÊ
}
Ê
«ÜiÀÊv>VÌÀÊ*®ÊÜ
iÊÕÃi`ÊÜÌ
ÊÌ
iÊ>««À«À>ÌiÊ*ÜiÀÊ>VÌÀÊ
ÀÀiVÌÊ`ÕiÊ*
®ÊvÕ`ÊiÃÜ
iÀiÊÊÌ
ÃÊÃiVÌ°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amps Overall (A) Length Width Height ML MW Fig (lbs)
15030-OG £x]äääÊ ÎäÊ {xäÊ Î°Ê £Ó£É{Ê £äÊ {£É{Ê xÎÉ{Ê £££ÉnÊ ÎÊ £Ê ÓÇ
12030-OG £Ó]äääÊ ÎäÊ ÎÈäÊ Î°ÓÊ £Ó£É{Ê £äÊ {£É{Ê xÎÉ{Ê £££ÉnÊ ÎÊ £Ê ÓÈ
10530-OG £ä]xääÊ ÎäÊ Î£xÊ Ó°Ê £Ó£É{Ê £äÊ {£É{Ê xÎÉ{Ê £££ÉnÊ ÎÊ £Ê Óx
9030-OG ]äääÊ ÎäÊ ÓÇäÊ Ó°{Ê Ê Ç£É{Ê Î££É£ÈÊ xÎÉÎÓÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ £{°x
7530-OG Ç]xääÊ ÎäÊ ÓÓxÊ Ó°äÊ Ê Ç£É{Ê Î££É£ÈÊ xÎÉÎÓÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ £Î°x
6030-O (1) È]äääÊ ÎäÊ £näÊ £°ÈÊ Ê Ç£É{Ê ÎÇÉnÊ ÎÎÉnÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ £ä
5030-O (1) x]äääÊ ÎäÊ £xäÊ £°ÎÊ Ê Ç£É{Ê ÎÇÉnÊ ÎÎÉnÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ £ä
4030-O (1) {]äääÊ ÎäÊ £ÓäÊ £°£Ê Ê Ç£É{Ê ÎÇÉnÊ ÎÎÉnÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ
3030-O (1) Î]äääÊ ÎäÊ äÊ ä°nÊ Ê Ç£É{Ê ÎÇÉnÊ ÎÎÉnÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ
15060-OG £x]äääÊ ÈäÊ ääÊ È°nÊ £ÎÊ £äÎÉ{Ê x£ÉÓÊ ÈxÉnÊ ££ÇÉnÊ ÎÊ £Ê {Ó
12060-OG £Ó]äääÊ ÈäÊ ÇÓäÊ x°xÊ £ÎÊ £äÎÉ{Ê x£ÉÓÊ ÈxÉnÊ ££ÇÉnÊ ÎÊ £Ê {£
9060-OG ]äääÊ ÈäÊ x{äÊ {°ÇÊ £ÎÊ £äÎÉ{Ê x£ÉÓÊ ÈxÉnÊ ££ÇÉnÊ ÎÊ £Ê Σ
7560-OG Ç]xääÊ ÈäÊ {xäÊ Î°Ê £Ó£É{Ê £äÊ {£É{Ê xÎÉ{Ê £££ÉnÊ ÎÊ £Ê Ó{
6060-OG È]äääÊ ÈäÊ ÎÈäÊ Î°ÓÊ £Ó£É{Ê £äÊ {£É{Ê xÎÉ{Ê £££ÉnÊ ÎÊ £Ê ÓÎ
5060-OG x]äääÊ ÈäÊ ÎääÊ Ó°ÈÊ Ê Ç£É{Ê Î££É£ÈÊ xÎÉÎÓÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ Ó£
4060-OG {]äääÊ ÈäÊ Ó{äÊ Ó°£Ê Ê Ç£É{Ê Î££É£ÈÊ xÎÉÎÓÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ £Ó
3060-OG Î]äääÊ ÈäÊ £näÊ £°ÈÊ Ê Ç£É{Ê Î££É£ÈÊ xÎÉÎÓÊ Ç£xÉ£ÈÊ ÓxÉnÊ ÓÊ ££
NOTE: (1)
Ê1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
iÃÃÊ}°Ê£ iÃÃÊ}°ÊÓ
/"7 Ê1, Ê6
,-"1 /Ê
" Ê- Ê/, -",
,-ÊUÊ
"-
ÊUÊ " 7
/
,*,"" actown
Sign Supplies
1ӣȣÊEÊ
ÊÈääÊV«>Ì°ÊÊ/Ü«>ÀÌÊi«ÝÞÊwÊÜÌ
Ê}À>Õ>ÀÊÃV>ÊvÀÊViÀÊ«iÀ>Ì°Ê
µÕ««i`ÊÜÌ
ÊÌÀÕLiÊÃ
Ì}ÊLÞ«>ÃÃʺÃÜiÀ»ÊLÕÌÌ°Ê
>ÊLiÊÕÃi`ÊÜÌ
Ê
y>Ã
iÀÃ]Ê>>ÌÀÃÊ>`Ê`iÀðÊÊi>ÌÕÀiÃÊÃiV`>ÀÞÊ}ÀÕ`Êv>ÕÌÊ«ÀÌiVÌÊÊ`«ÌÊÀiÌÕÀi`ÊEÊVÛiÌ>ÊÃiÀiÃÊÜÀ}Ê>««V>ÌðÊÊ
>Ê>ÃÊLiÊÕÌi`ÊÊ
any direction and features keyhole mounting holes for simple installation. Complete with mounted on-off rocker switch in sturdy case with handle. Can be converted
ÌÊ
}
Ê«ÜiÀÊv>VÌÀÊ*®ÊÜ
iÊÕÃi`ÊÜÌ
ÊÌ
iÊ>««À«À>ÌiÊ*ÜiÀÊ>VÌÀÊ
ÀÀiVÌÊ`ÕiÊ*
®ÊvÕ`ÊiÃÜ
iÀiÊÊÌ
ÃÊÃiVÌ°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amps Overall (A) Length Width Height ML MW (lbs)
15030-VMG £x]äääÊ ÎäÊ {xäÊ Î°Ê £ÓÊ £äÊ xÎÉ{Ê Ç£É{Ê ££Ê ÎÊ -29
12030-VMG £Ó]äääÊ ÎäÊ ÎÈäÊ Î°ÓÊ £ÓÊ £äÊ xÎÉ{Ê Ç£É{Ê ££Ê ÎÊ -27
10530-VMG £ä]xääÊ ÎäÊ Î£xÊ Ó°Ê £ÓÊ £äÊ xÎÉ{Ê Ç£É{Ê ££Ê ÎÊ -25
9030-VMG ]äääÊ ÎäÊ ÓÇäÊ Ó°{Ê £ä£É{Ê nÊ {£ÉnÊ Ç£É{Ê n£xÉ£ÈÊ Ó£É{Ê -15
7530-VMG Ç]xääÊ ÎäÊ ÓÓxÊ Ó°äÊ £ä£É{Ê nÊ {£ÉnÊ Ç£É{Ê n£xÉ£ÈÊ Ó£É{Ê -14
6030-VM (1) È]äääÊ ÎäÊ £näÊ £°ÈÊ £ä£É{Ê nÊ {£ÉnÊ È£ÉnÊ n£xÉ£ÈÊ Ó£É{Ê £Ó
5030-VM (1) x]äääÊ ÎäÊ £xäÊ £°ÎÊ £ä£É{Ê nÊ {£ÉnÊ È£ÉnÊ n£xÉ£ÈÊ Ó£É{Ê £Ó
4030-VM (1) {]äääÊ ÎäÊ £ÓäÊ £°£Ê £ä£É{Ê nÊ {£ÉnÊ È£ÉnÊ n£xÉ£ÈÊ Ó£É{Ê ££
3030-VM (1) Î]äääÊ ÎäÊ äÊ ä°nÊ £ä£É{Ê nÊ {£ÉnÊ È£ÉnÊ n£xÉ£ÈÊ Ó£É{Ê ££
15060-VMG £x]äääÊ ÈäÊ ääÊ È°nÊ £ÓÊ £äÊ xÎÉ{Ê ÎÉnÊ ££Ê ÎÊ -44
12060-VMG £Ó]äääÊ ÈäÊ ÇÓäÊ x°xÊ £ÓÊ £äÊ xÎÉ{Ê nÎÉ{Ê ££Ê ÎÊ -38
9060-VMG ]äääÊ ÈäÊ x{äÊ {°ÇÊ £ÓÊ £äÊ xÎÉ{Ê nÎÉ{Ê ££Ê ÎÊ -32
7560-VMG Ç]xääÊ ÈäÊ {xäÊ Î°Ê £ÓÊ £äÊ xÎÉ{Ê Ç£É{Ê ££Ê ÎÊ -29
6060-VMG È]äääÊ ÈäÊ ÎÈäÊ Î°ÓÊ £ÓÊ £äÊ xÎÉ{Ê Ç£É{Ê ££Ê ÎÊ -27
5060-VMG x]äääÊ ÈäÊ ÎääÊ Ó°ÈÊ £ä£É{Ê nÊ {Ê Ç£É{Ê n£xÉ£ÈÊ Ó£É{Ê -£È
4060-VMG {]äääÊ ÈäÊ Ó{äÊ Ó°£Ê £ä£É{Ê nÊ {Ê Ç£É{Ê n£xÉ£ÈÊ Ó£É{Ê -15
3060-VMG Î]äääÊ ÈäÊ £näÊ £°ÈÊ £ä£É{Ê nÊ {Ê Ç£É{Ê n£xÉ£ÈÊ Ó£É{Ê -14
NOTE: (1)
Ê1ӣȣÊÃÌi`ÊÜÌ
ÕÌÊ-iV`>ÀÞÊÀÕ`Ê>ÕÌÊ*ÀÌiVÌ°
Case Dimensions
INTERSTATE ELECTRIC CO., INC.
9ATES !VE #OMMERCE #! s 0ROCYON ,AS 6EGAS .6 s 'OODYEAR 2D "ENICIA #!
A-91
/"7 Ê*Ê"1- Ê/, -",
,- actown
Sign Supplies
1ӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°ÊÊi>ÌÕÀiÃÊ>ÊÌÜ«>ÀÌÊi«ÝÞÊwÊVÀ«À>Ì}Ê}À>Õ>ÀÊÃV>ÊvÀÊViÀÊ«iÀ>Ì°ÊÊÊvÕÞÊiVÃi`ʸ*
¸ÊÛiÀÃÊÃÊ>ÃÊ
>Û>>LiÊÊÎä°ÊÊ``ÊÃÕvwÝʸ
¸ÊÌÊV>Ì>}ÊÕLiÀ°ÊÊ
>ÊLiÊVÛiÀÌi`ÊÌÊ
}
Ê«ÜiÀÊv>VÌÀÊ*®ÊÜ
iÊÕÃi`ÊÜÌ
ÊÌ
iÊ>««À«À>ÌiÊ*ÜiÀÊ>VÌÀÊ
ÀÀiVÌÊ`ÕiÊ
*
®ÊvÕ`ÊiÃÜ
iÀiÊÊÌ
ÃÊÃiVÌ°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amps Overall (A) Length Width Height ML MW B C (lbs)
9030-PK ]äääÊ ÎäÊ ÓÇäÊ Ó°{Ê £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £Î
7530-PK Ç]xääÊ ÎäÊ ÓÓxÊ Ó°äÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £Ó
6030-PK È]äääÊ ÎäÊ £näÊ £°ÈÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ ££
5030-PK x]äääÊ ÎäÊ £xäÊ £°ÎÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £ä
4030-PK {]äääÊ ÎäÊ £ÓäÊ £°£Ê £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £ä
3030-PK Î]äääÊ ÎäÊ äÊ ä°nÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉnÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £ä
9060-PK ]äääÊ ÈäÊ x{äÊ {°ÇÊ £{Ê £Ó£É{Ê Î£xÉ£ÈÊ Î£ÉÓÊ £Î£ÉnÊ ÓÊ £ÎÉ{Ê £ÎÉ{Ê Ó{
7560-PK Ç]xääÊ ÈäÊ {xäÊ Î°Ê £{Ê £Ó£É{Ê Î£xÉ£ÈÊ Î£ÉÓÊ £Î£ÉnÊ ÓÊ £ÎÉ{Ê £ÎÉ{Ê ÓÓ
6060-PK È]äääÊ ÈäÊ ÎÈäÊ Î°ÓÊ £{Ê £Ó£É{Ê Î£xÉ£ÈÊ Î£ÉÓÊ £Î£ÉnÊ ÓÊ £ÎÉ{Ê £ÎÉ{Ê Óä
5060-PK x]äääÊ ÈäÊ ÎääÊ Ó°ÈÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉÓÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £{
4060-PK {]äääÊ ÈäÊ Ó{äÊ Ó°£Ê £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉÓÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ £Î
3060-PK Î]äääÊ ÈäÊ £näÊ £°ÈÊ £ä£ÉnÊ nÎÉnÊ Î£xÉ£ÈÊ Î£ÉÓÊ £É{Ê ÓÊ £ÎÉ{Ê £É£ÈÊ ££
Case Dimensions
1ӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°ÊÊ->iÊvi>ÌÕÀiÃÊ>ÃÊ*ÊÌÞ«iÊLÕÌÊÜÌ
Ê>``i`ÊÜÊ«ÀwiÊ`iÃ}°ÊÊÎȸÊi>`ÃÊ>`Ê}>Û>âi`ÊV`ÕÌÊViVÌÀÊ««i]ÊÜ
V
Ê
iÃÕÀiÃÊiÝViiÌÊÊ
Ê}ÀÕ`ÊÜÌ
ÕÌÊ>ÊÌ
À`ÊÜÀi°ÊÊ
>ÊLiÊVÛiÀÌi`ÊÌÊ
}
Ê«ÜiÀÊv>VÌÀÊ*®ÊÜ
iÊÕÃi`ÊÜÌ
ÊÌ
iÊ>««À«À>ÌiÊ*ÜiÀÊ>VÌÀÊ
ÀÀiVÌÊ`ÕiÊ*
®Ê
found elswhere in this section.
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amps Overall (A) Length Width Heigth ML MW B C (lbs)
5030-MPK x]äääÊ ÎäÊ £ÈäÊ £°ÎÊ ÇÊ x£ÎÉ£ÈÊ ÎÊ Ó£xÉ£ÈÊ ÈxÉ£ÈÊ ÓÊ ££ÉÓÊ ££É{Ê Ç
4030-MPK {]äääÊ ÎäÊ £ÎäÊ £°£Ê ÇÊ x£ÎÉ£ÈÊ ÎÊ Ó£xÉ£ÈÊ ÈxÉ£ÈÊ ÓÊ ££ÉÓÊ ££É{Ê Ç
3030-MPK Î]äääÊ ÎäÊ £ääÊ ä°nÊ ÇÊ x£ÎÉ£ÈÊ ÎÊ Ó£xÉ£ÈÊ ÈxÉ£ÈÊ ÓÊ ££ÉÓÊ ££É{Ê Ç
/"7 Ê *Ê
Ê"1- Ê/, -",
,-
1ӣȣÊV«>Ì°ÊÊÀÊÌiÀ>ÊÕÌ}°ÊÊ->iÊvi>ÌÕÀiÃÊ>ÃÊ*ÊÌÀ>ÃvÀiÀðÊÊ
>ÊLiÊVÛiÀÌi`ÊÌÊ
}
Ê«ÜiÀÊv>VÌÀÊ*®ÊÜ
iÊÕÃi`ÊÜÌ
ÊÌ
iÊ>««À«À>ÌiÊ
*ÜiÀÊ>VÌÀÊ
ÀÀiVÌÊ`ÕiÊ*
®ÊvÕ`ÊiÃÜ
iÀiÊÊÌ
ÃÊÃiVÌ°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions Weight
Number Volts mA V.A. Amps Overall (A) Length Width Height ML MW B C (lbs)
5030-EMPK x]äääÊ ÎäÊ £ÈäÊ £°ÎÊ nÊ ÈÎÉ{Ê ÎÊ Ó£xÉ£ÈÊ ÇxÉ£ÈÊ ÓÊ ££ÉÓÊ ÓÊ n
4030-EMPK {]äääÊ ÎäÊ £ÎäÊ £°£Ê nÊ ÈÎÉ{Ê ÎÊ Ó£xÉ£ÈÊ ÇxÉ£ÈÊ ÓÊ ££ÉÓÊ ÓÊ Ç
3030-EMPK Î]äääÊ ÎäÊ £ääÊ ä°nÊ nÊ ÈÎÉ{Ê ÎÊ Ó£xÉ£ÈÊ ÇxÉ£ÈÊ ÓÊ ££ÉÓÊ ÓÊ Ç
Sign Supplies
"Ì
iÀÊÃâiÃÊ>ÞÊ>ÃÊLiÊ>Û>>Li°
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Dimensions (Inches) Weight
Number Volts mA VA Amps Length Width Height ML MW (lbs)
6520-C È]xääÊ ÓäÊ £ÎäÊ £°£Ê {ÎÉ{Ê ÓÎÉ{Ê Î££É£ÈÊ {£É{Ê ££xÉ£ÈÊ x
5020-C x]äääÊ ÓäÊ £ääÊ £°äÊ {ÎÉ{Ê ÓxÉnÊ Î££É£ÈÊ {£É{Ê £ÎÉ{Ê {
5010-C x]äääÊ £äÊ xäÊ ä°xÊ {ÎÉ{Ê ÓÎÉnÊ ÎxÉnÊ {£É{Ê £ÎÉ{Ê Î
4030-C {]äääÊ ÎäÊ £ÓäÊ £°£Ê {ÎÉ{Ê ÓÎÉ{Ê Î££É£ÈÊ {£É{Ê ££xÉ£ÈÊ {
4020-C {]äääÊ ÓäÊ näÊ ä°ÇÊ {ÎÉ{Ê ÓxÉnÊ Î££É£ÈÊ {£É{Ê £ÎÉ{Ê {
3508-C Î]xääÊ nÊ ÎäÊ ä°ÎÊ ÎÇÉnÊ ÓÊ ÎÊ ÎxÉnÊ £xÉnÊ Ó
3025-C Î]äääÊ ÓxÊ ÇxÊ ä°ÇÊ {ÎÉ{Ê ÓxÉnÊ Î££É£ÈÊ {£É{Ê £ÎÉ{Ê {
2030-C Ó]äääÊ ÎäÊ ÈäÊ ä°xÊ {££É£ÈÊ ÓÎÉnÊ ÎÎÉ£ÈÊ ÎÊ £££É£ÈÊ Î
Case Dimensions
/"7 Ê "",Ê /
Ê-*9Ê/, -",
,-
ÊÛiÀÞÊÃ>]Ê}
ÌÊÜi}
ÌÊ>}iÌVÊiÊÌÀ>ÃvÀiÀ°ÊÊ`i>ÊvÀÊ`ë>ÞÃ]ÊÃÌÀiÊ
headers or any low voltage indoor application.
£Óä6ÊUÊÈäâÊUÊ À>Ê*ÜiÀÊ>VÌÀÊUÊ`Û`Õ>ÞÊ Ýi`
Catalog Secondary Primary Input Primary Dimensions (Inches) Weight
Number Volts mA VA Amps Conn. Length Width Height M (oz)
3008-L Î]äääÊ nÊ Ó{Ê ä°ÓÊ £Ó¸Êi>`ÃÊ ÎÊ £ÇÉ£äÊ Ó£É{Ê ÎÓÉxÊ Óä
3008-C Î]äääÊ nÊ Ó{Ê ä°ÓÊ È¿ÊiÊ
À`ÊÜÉ-ÜÌV
Ê ÎÊ £ÇÉ£äÊ Ó£É{Ê ÎÓÉxÊ Óä
Case Dimensions
VÌÜÊ *
Ê `ÕiÃÊ >ÀiÊ >Û>>LiÊ Ê wvÌiiÊ `iÃÊ Ü
V
Ê VÛiÀÌÊ >Ê VÌÜÊ
ÌÀ>ÃvÀiÀÃÊÌÊ}
Ê*ÜiÀÊ>VÌÀÊ*®ÊÕÌðÊÊ*
Ê`ÕiÃÊ>ÀiÊÃi«>À>ÌiÊÕÌÃÊ
from the transformer and allow for simple wiring and installation in all orientations.
*
Ê`ÕiÃÊÜÊ>ÃÊÀi`ÕViÊVÕÀÀiÌÊvÀÊVÌÜÊLÀ>`ÊÌÀ>ÃvÀiÀð
iÌ>ʸ¸
*
ÊiÃÃ
Sign Supplies
A portable, heavy duty unit which tests operating current, flicker, sign input voltage
>`Ê>ÊÌiÃÌÃÊÌ
>ÌÊ>ÀiÊ*
ÒÊV«>ÌLi°
SPECIFICATIONS
>iÌiÀÊäÇä®Ê´Ê£¯Ê ¸«ÕÌÊ6Ì>}iÉ6>À>VÊ6Ì>}i¸Ê-ÜÌV
,-Ê6ÌiÌiÀÊä£xä6
®Ê´Ê£¯Ê /"ÊÜÌ
ÊÃ
i`i`Ê>}>ÌÀÊV«ÃÊ Ê
/"7 Ê1 "1-Ê/1
Ê""/
Ê
,/ NOTES:
Actown recommends conducting a flicker test at input voltage of 90 VAC or less All footage is based on average grade of tubing.
>`Ê>ÊÊÌiÃÌ\Ê«iÀ>Ì}ÊVÕÀÀiÌÊ>ÌÊnx¯ÊvÊÃ
ÀÌÊVÀVÕÌÊVÕÀÀiÌÊvÀÊiÊ>`Ê Deduct approximately one (1) foot from the figures below for each pair of electrodes.
80% for mercury filled tubes. Add 10% to the recommended gas pressure measured in mm of Hg when the length of
tube is less than 10'.
/À>ÃvÀiÀÊ-«iVwV>ÌÃ ««ÀÝ>ÌiÊ ÕLiÀÊvÊiiÌÊvÊ/ÕL}Ê"«iÀ>Ìi`
«ÕÌÊ«Ã «ÕÌÊ«Ã Clear or Flourecent Red iÀVÕÀÞÊi`Ê/ÕLi]Ê
i>ÀÊÀÊÕÀiViÌ Secondary
Short (120 VAC) (277 VAC) (also recommended for neon Flouresent Gold) All Colors, All Enclosed Applications
Secondary Circuit Voltage
Voltage Current With With /ÕLiÊÃâiÊÊiÌiÀÃ /ÕLiÊÃâiÊÊiÌiÀÃ V
V (mA) Std. *
Std. *
`Õi `Õi 18 15 14 13 12 11 10 9 18 15 14 13 12 11 10 9
Ê ÈäÊ È°nÊ Î°ÓxÊ Ó°Ê £°ÎÓ Ê ÇÓÊ ÈäÊ x{Ê xäÊ {xÊ {äÊ ÎÈÊ ÎÓÊ näÊ ÇÓÊ È{Ê ÈäÊ xxÊ {nÊ {{Ê Î
15,000 Ê ÎäÊ Î°Ê £°ÇäÊ £°{Ê °nÈ Ê ÇÓÊ ÈäÊ x{Ê xäÊ {xÊ {äÊ ÎÈÊ ÎÓÊ näÊ ÇÓÊ È{Ê ÈäÊ xxÊ {nÊ {{Ê Î 15,000
25 2.9 1.50 - - Ê ÇÓÊ ÈäÊ x{Ê xäÊ {xÊ {äÊ ÎÈÊ ÎÓÊ näÊ ÇÓÊ È{Ê ÈäÊ xxÊ {nÊ {{Ê Î
Ê ÈäÊ x°xÊ Ó°xxÊ Ó°{Ê £°£Ó Ê xxÊ {xÊ {ÓÊ ÎÊ ÎxÊ ÎÓÊ ÓÊ ÓÈÊ ÈÓÊ xxÊ xäÊ {ÈÊ {ÓÊ ÎnÊ ÎxÊ Î£
12,000 12,000
Ê ÎäÊ Î°ÓÊ £°{äÊ £°ÓÊ ä°È Ê xxÊ {xÊ {ÓÊ ÎÊ ÎxÊ ÎÓÊ ÓÊ ÓÈÊ ÈÓÊ xxÊ xäÊ {ÈÊ {ÓÊ ÎnÊ ÎxÊ Î£
Ê ÈäÊ {°ÇÊ Ó°ääÊ £°ÇÊ ä°ÇÇ Ê {äÊ ÎÎÊ ÎäÊ ÓÊ ÓÈÊ Ó{Ê Ó£Ê £nÊ {xÊ {äÊ ÎÈÊ ÎÎÊ Î£Ê ÓnÊ ÓxÊ ÓÓ
9,000 Ê ÎäÊ Ó°{Ê £°ÓäÊ ä°Ê ä°{È Ê {äÊ ÎÎÊ ÎäÊ ÓÊ ÓÈÊ Ó{Ê Ó£Ê £nÊ {xÊ {äÊ ÎÈÊ ÎÎÊ Î£Ê ÓnÊ ÓxÊ ÓÓ 9,000
Ê ÓxÊ £°ÈÊ ä°nxÊ Ê Ê {äÊ ÎÎÊ ÎäÊ ÓÊ ÓÈÊ Ó{Ê Ó£Ê £nÊ {xÊ {äÊ ÎÈÊ ÎÎÊ Î£Ê ÓnÊ ÓxÊ ÓÓ
Ê ÈäÊ Î°Ê £°näÊ £°xÊ ä°Èä Ê ÓnÊ ÓÈÊ Ó{Ê ÓÓÊ Ó£Ê £Ê £ÇÊ £xÊ ÎxÊ Î£Ê ÓnÊ ÓÇÊ ÓxÊ ÓÎÊ ÓäÊ £n
7,500 30 2.0 0.95 0.7 0.34 Ê ÓnÊ ÓÈÊ Ó{Ê ÓÓÊ Ó£Ê £Ê £ÇÊ £xÊ ÎxÊ Î£Ê ÓnÊ ÓÇÊ ÓxÊ ÓÎÊ ÓäÊ £n 7,500
25 1.4 - - - Ê ÓnÊ ÓÈÊ Ó{Ê ÓÓÊ Ó£Ê £Ê £ÇÊ £xÊ ÎxÊ Î£Ê ÓnÊ ÓÇÊ ÓxÊ ÓÎÊ ÓäÊ £n
6,500 20 1.1 - - - Ê ÓxÊ ÓÎÊ Ó£Ê ÓäÊ £nÊ £ÇÊ £xÊ £ÎÊ ÎäÊ ÓÈÊ ÓxÊ ÓÎÊ Ó£Ê ÓäÊ £nÊ £È 6,500
Ê ÈäÊ Î°ÓÊ £°{äÊ £°ÓÊ ä°{n Ê ÓÎÊ ÓäÊ £Ê £nÊ £ÈÊ £xÊ £ÎÊ £ÓÊ ÓnÊ Ó{Ê ÓÎÊ Ó£Ê £Ê £nÊ £ÈÊ £{
6,000 6,000
Ê ÎäÊ £°ÈÊ ä°Ç{Ê ä°ÇÊ ä°Îä Ê ÓÎÊ ÓäÊ £Ê £nÊ £ÈÊ £xÊ £ÎÊ £ÓÊ ÓnÊ Ó{Ê ÓÎÊ Ó£Ê £Ê £nÊ £ÈÊ £{
Ê ÈäÊ Ó°ÈÊ £°ÎxÊ £°äÊ ä°{x Ê £Ê £ÇÊ £ÈÊ £xÊ £ÓÊ ££Ê £äÊ nÊ ÓÎÊ ÓäÊ £Ê £ÈÊ £xÊ £ÎÊ £ÓÊ £ä
Ê ÎäÊ £°ÎÊ ä°ÈnÊ ä°xÊ ä°Ó£ Ê £Ê £ÇÊ £ÈÊ £xÊ £ÓÊ ££Ê £äÊ nÊ ÓÎÊ ÓäÊ £Ê £ÈÊ £xÊ £ÎÊ £ÓÊ £ä
5,000 5,000
20 1.0 - - - Ê £ÇÊ £xÊ £ÎÊ £ÎÊ ££Ê Ê nÊ ÇÊ ÓÓÊ £nÊ £ÈÊ £xÊ £ÎÊ £ÓÊ ££Ê
10 0.5 - - - Ê £ÈÊ £ÎÊ £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ ÓÓÊ £nÊ £ÈÊ £xÊ £ÎÊ £ÓÊ ££Ê
Ê ÈäÊ Ó°£Ê ä°xÊ ä°Ê ä°Îx Ê £ÈÊ £ÎÊ £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ £Ê £ÈÊ £{Ê £ÎÊ £ÓÊ £äÊ Ê n
4,000 30 1.1 0.54 0.4 0.20 Ê £ÈÊ £ÎÊ £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ £Ê £ÈÊ £{Ê £ÎÊ £ÓÊ £äÊ Ê n 4,000
20 0.7 - - - Ê £ÎÊ ££Ê £äÊ £äÊ Ê nÊ ÇÊ ÈÊ £ÈÊ £ÎÊ £ÓÊ £ÓÊ ££Ê Ê nÊ ÇÊ
3,500 8 0.3 - - - Ê ££Ê Ê Ê nÊ ÇÊ ÈÊ ÈÊ xÊ £ÈÊ £ÎÊ £ÓÊ £ÓÊ ££Ê Ê nÊ Ç 3,500
Ê ÈäÊ £°ÈÊ ä°ÇäÊ ä°ÈÊ ä°Óx Ê ££Ê £äÊ Ê Ê nÊ ÇÊ ÈÊ xÊ £{Ê £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ ÈÊ
30 0.8 0.45 0.3 0.14 Ê ££Ê £äÊ Ê Ê nÊ ÇÊ ÈÊ xÊ £{Ê £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ È
3,000 25 0.7 - - - Ê ££Ê Ê nÊ nÊ ÇÊ ÈÊ ÈÊ xÊ £{Ê £ÓÊ ££Ê £äÊ Ê nÊ ÇÊ È 3,000
8 0.2 - - - Ê ££Ê Ê nÊ nÊ ÇÊ ÈÊ ÈÊ xÊ £ÓÊ £äÊ Ê Ê nÊ ÇÊ ÈÊ x
2,000 30 0.5 - - - Ê ÇÊ ÇÊ ÈÊ ÈÊ xÊ xÊ {Ê {Ê Ê Ê nÊ nÊ ÇÊ ÈÊ xÊ x 2,000
Recommended gas pressure in mm of Hg 8 9 10 10 11 12 13 15 8 9 10 10 11 12 13 15
iÃ}i`ÊÌÊiiÌÊLÌ
Ê1ÊӣȣÊ>`Ê1ÊxäÈÊÃÌ>`>À`ðÊÊ
«iÃÊÜÌ
Ê¿ÈÊ >Ì>Ê
iVÌÀVÊ
`iÊÜÌ
ÕÌÊ>``Ì>Êv>ÕÌ«ÀÌiVÌÊVÀVÕÌÀÞ°ÊÊ}
Ê«>VÌÀiÃÃÌ>ÌÊ
primary bushing made of Ryton™. Versatile and economical. Eliminates unnecessary service calls (nuisance tripping). Designed for mid-point wired applications.
`i>ÊvÀÊLÌ
Ê`ÀÊ>`ÊÕÌ`ÀÊÃÌ>>Ìð
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`ÊUÊ
ÀVÕÌÊ/Þ«i\Ê`Ê*ÌÊÃ>Ìi`Ê*®
Catalog Secondary VA Line Input Circuit Case Dimensions (Inches) Weight
Number Voltage Current (mA) Rating Current (Amps) Watts Type A B C D E F G H (lbs.)
Ê À>Ê*ÜiÀÊ>VÌÀ
M15030I120N-T £x]äääÊ ÎäÊ {xäÊ Î°ÇxÊ ÓÎ{Ê *Ê £Î£ÉÎÓÊ {xÉ£ÈÊ x£ÉÓÊ n££É£ÈÊ ££É£ÈÊ ÎÎÉ£ÈÊ £ä££É£ÈÊ ÇÉ£ÈÝxÉnÊ Ó{
M12030I120N-T £Ó]äääÊ ÎäÊ ÎÈäÊ Î°ääÊ £nÇÊ *Ê £Î£ÉÎÓÊ {xÉ£ÈÊ x£ÉÓÊ n££É£ÈÊ ££É£ÈÊ ÎÎÉ£ÈÊ £ä££É£ÈÊ ÇÉ£ÈÝxÉnÊ ÓÎ
M9030I120N-T ]äääÊ ÎäÊ ÓÇäÊ Ó°ÓxÊ £{äÊ *Ê £Î£ÉÎÓÊ {xÉ£ÈÊ x£ÉÓÊ n££É£ÈÊ ££É£ÈÊ ÎÎÉ£ÈÊ £ä££É£ÈÊ ÇÉ£ÈÝxÉnÊ Óä
Case Dimensions
/
Ê-"/
Ê
- Ê
" Ê- Ê/, -",
,-Ê"1/"",Ê " 7
/
,*,""
iÃ}i`ÊÌÊiiÌÊLÌ
Ê1ÊӣȣÊ>`Ê1ÊxäÈÊÃÌ>`>À`ðÊÊ
«iÃÊÜÌ
Ê¿ÈÊ >Ì>Ê
iVÌÀVÊ
`iÊÜÌ
ÕÌÊ>``Ì>Êv>ÕÌ«ÀÌiVÌÊVÀVÕÌÀÞ°ÊÊi>ÌÕÀiÃÊ>ÊÜÊ«ÀwiÊ
`iÃ}ÊvÀÊÀiÊÕÌ}Ê«ÌðÊÊ}
Ê«>VÌÀiÃÃÌ>ÌÊ«À>ÀÞÊLÕÃ
}Ê>`iÊvÊ,ÞÌÒ°ÊÊ`i>ÊvÀÊLÌ
Ê`ÀÊ>`ÊÕÌ`ÀÊÃÌ>>Ìð
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`ÊUÊ
ÀVÕÌÊ/Þ«i\ÊÃ>Ìi`Ê-"®
Catalog Secondary VA Line Input Circuit Case Dimensions (Inches) Weight
Number Voltage Current (mA) Rating Current (Amps) Watts Type A B C D E F G H (lbs.)
Ê ÜÊ*ÀwiÊUÊ À>Ê*ÜiÀÊ>VÌÀ
M7530I120N-C Ç]xääÊ ÎäÊ ÓÓxÊ £°nnÊ ££ÇÊ -"Ê £ä££É£ÈÊ {Ê ÎÎÉnÊ ÇÎÉnÊ nÎÉnÊ ÎÎÉ£ÈÊ ÎÉnÊ ÇÉ£ÈÝxÉnÊ ££
M6030I120N-C È]äääÊ ÎäÊ £näÊ £°xäÊ {Ê -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ ££
M5030I120N-C x]äääÊ ÎäÊ £xäÊ £°ÓxÊ ÇnÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
M4030I120N-C {]äääÊ ÎäÊ £ÎäÊ £°änÊ ÈnÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
M3030I120N-C Î]äääÊ ÎäÊ £ääÊ ä°nÎÊ xÓÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
ÓÇÇ6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`ÊUÊ
ÀVÕÌÊ/Þ«i\ÊÃ>Ìi`Ê-"®
Catalog Secondary VA Line Input Circuit Case Dimensions (Inches) Weight
Number Voltage Current (mA) Rating Current (Amps) Watts Type A B C D E F G H (lbs.)
Ê ÜÊ*ÀwiÊUÊ À>Ê*ÜiÀÊ>VÌÀ
M7530I277N-C Ç]xääÊ ÎäÊ ÓÓxÊ ä°n£Ê ££ÇÊ -"Ê £ä££É£ÈÊ {Ê ÎÎÉnÊ ÇÎÉnÊ nÎÉnÊ ÎÎÉ£ÈÊ ÎÉnÊ ÇÉ£ÈÝxÉnÊ ££
M6030I277N-C È]äääÊ ÎäÊ £näÊ ä°ÈxÊ {Ê -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ ££
M5030I277N-C x]äääÊ ÎäÊ £xäÊ ä°x{Ê ÇnÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
M4030I277N-C {]äääÊ ÎäÊ £ÎäÊ ä°{ÇÊ ÈnÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
M3030I277N-C Î]äääÊ ÎäÊ £ääÊ ä°ÎÈÊ xÓÊ -"Ê £ä£É£ÈÊ {Ê ÎÎÉnÊ ÈÎÉ{Ê ÇÎÉ{Ê ÎÎÉ£ÈÊ nÎÉ{Ê ÇÉ£ÈÝxÉnÊ £ä
Case Dimensions
Sign Supplies
1ӣȣÊV«>Ì°ÊÊ iÊÌÕL}ʸ«Õ}øÊ`ÀiVÌÞÊÌÊÌÀ>ÃvÀiÀ°ÊÊ
>ÌiÃÊÌ
iÊii`ÊvÀÊ/"ÊÜÀiÊViVÌðÊÊiÃ}i`ÊÌÊwÌÊÊÌ}
ÌʵÕ>ÀÌiÀðÊÊ
ÕÌÃÊÃ`iÊwÝi`ÊiÊÃ}ðÊÊ`i>ÊvÀÊ`Û`Õ>ÊV
>iÊiÌÌiÀð
£Óä6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`ÊUÊ
ÀVÕÌÊ/Þ«iÃ\Ê`Ê*ÌÊÀÕ`Ê*®]Ê`Ê*ÌÊÀÕ`Ê1 >>Vi`Ê*1 ®]Ê
`ÊÀÕ`Ê
®
Catalog Secondary VA Line Input Circuit Case Dimensions (Inches) Weight
Number Voltage Current (mA) Rating Current (Amps) Watts Type A B C D L S (lbs.)
Ê ÜÊ*ÀwiÊUÊ À>Ê*ÜiÀÊ>VÌÀ
M1530G120NPK £x]äääÊ ÎäÊ {xäÊ Î°ÇxÊ ÓÎ{Ê *Ê £££ÉÓÊ x£É{Ê {ÎÉ£ÈÊ £äÊ £äxÉnÊ ££É£ÈÊ Ó{
M1230G120NPK £Ó]äääÊ ÎäÊ ÎÈäÊ Î°ääÊ £nÇÊ *Ê £££ÉÓÊ x£É{Ê {ÎÉ£ÈÊ £äÊ £äxÉnÊ ££É£ÈÊ ÓÎ
M9030G120NPK ]äääÊ ÎäÊ ÓÇäÊ Ó°ÓxÊ £{äÊ *1 Ê £ä£ÉnÊ Î££É£ÈÊ Î£ÉnÊ nxÉnÊ £É{Ê ££ÉÎÓÊ £Ó
M7530G120NPK Ç]xääÊ ÎäÊ ÓÓxÊ £°nnÊ ££ÇÊ *1 Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê £Ó
M6030G120NPK È]äääÊ ÎäÊ £näÊ £°xäÊ {Ê *1 Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê ££
M5030G120NPK x]äääÊ ÎäÊ £ÈäÊ £°ÎÎÊ nÎÊ *1 Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê ££
M4030G120NPK {]äääÊ ÎäÊ £{äÊ £°£ÇÊ ÇÎÊ
Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê £ä
M3030G120NPK Î]äääÊ ÎäÊ £ääÊ ä°nÎÊ xÓÊ
Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê
M9060G120NPK ]äääÊ ÈäÊ x{äÊ {°xäÊ Ón£Ê *Ê £{£ÉnÊ ÎÇÉ£ÈÊ ÎxÉ£ÈÊ £ÓxÉnÊ £Î£É{Ê ÓÇÉ£ÈÊ Óä
M7560G120NPK Ç]xääÊ ÈäÊ {xäÊ Î°ÇxÊ ÓÎ{Ê *Ê £{£ÉnÊ ÎÇÉ£ÈÊ ÎxÉ£ÈÊ £ÓxÉnÊ £Î£É{Ê ÓÇÉ£ÈÊ Óä
M6060G120NPK È]äääÊ ÈäÊ ÎÈäÊ Î°ääÊ £nÇÊ *Ê £{£ÉnÊ ÎÇÉ£ÈÊ ÎxÉ£ÈÊ £ÓxÉnÊ £Î£É{Ê ÓÇÉ£ÈÊ £n
M5060G120NPK x]äääÊ ÈäÊ ÎääÊ Ó°xäÊ £xÈÊ *1 Ê £ä£ÉnÊ Î££É£ÈÊ Î£ÉnÊ nxÉnÊ £É{Ê ££ÉÎÓÊ £x
M4060G120NPK {]äääÊ ÈäÊ ÓÈäÊ Ó°£ÇÊ £ÎxÊ *1 Ê £ä£ÉnÊ Î££É£ÈÊ Î£ÉnÊ nxÉnÊ £É{Ê ££ÉÎÓÊ £Ó
M3060G120NPK Î]äääÊ ÈäÊ £näÊ £°xäÊ {Ê
Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê ££
Ê
«>VÌÊÜÊ*ÀwiÊUÊ À>Ê*ÜiÀÊ>VÌÀ
M530G120NPKC x]äääÊ ÎäÊ £ÈäÊ £°ÎÎÊ nÎÊ
Ê Ç£É£ÈÊ ÎxÉ£ÈÊ Ó£ÎÉ£ÈÊ xÓ£ÉÎÓÊ ÈÇÉ£ÈÊ ÇÉnÊ È
M430G120NPKC {]äääÊ ÎäÊ £{äÊ £°£ÇÊ ÇÎÊ
Ê Ç£É£ÈÊ ÎxÉ£ÈÊ Ó£ÎÉ£ÈÊ xÓ£ÉÎÓÊ ÈÇÉ£ÈÊ ÇÉnÊ È
M330G120NPKC Î]äääÊ ÎäÊ £ääÊ ä°nÎÊ xÓÊ
Ê Ç£É£ÈÊ ÎxÉ£ÈÊ Ó£ÎÉ£ÈÊ xÓ£ÉÎÓÊ ÈÇÉ£ÈÊ ÇÉnÊ È
ÓÇÇ6ÊUÊÈäâÊUÊ`Û`Õ>ÞÊ Ýi`ÊUÊ
ÀVÕÌÊ/Þ«iÃ\Ê`Ê*ÌÊÀÕ`Ê*®]Ê`Ê*ÌÊÀÕ`Ê1 >>Vi`Ê*1 ®]Ê
`ÊÀÕ`Ê
®
Catalog Secondary VA Line Input Circuit Case Dimensions (Inches) Weight
Number Voltage Current (mA) Rating Current (Amps) Watts Type A B C D L S (lbs.)
ÊÜÊ*ÀwiÊUÊ À>Ê*ÜiÀÊ>VÌÀ
M1530G277NPK £x]äääÊ ÎäÊ {xäÊ £°ÈÓÊ ÓÎ{Ê *Ê £££ÉÓÊ x£É{Ê {ÎÉ£ÈÊ £äÊ £äxÉnÊ ££É£ÈÊ Ó{
M1230G277NPK £Ó]äääÊ ÎäÊ ÎÈäÊ £°ÎäÊ £nÇÊ *Ê £££ÉÓÊ x£É{Ê {ÎÉ£ÈÊ £äÊ £äxÉnÊ ££É£ÈÊ ÓÎ
M4030G277NPK {]äääÊ ÎäÊ £{äÊ ä°xäÊ ÇÎÊ
Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê £ä
M3030G277NPK Î]äääÊ ÎäÊ £ääÊ ä°ÎÈÊ xÓÊ
Ê £äxÉnÊ ÎxÉnÊ ÓÓÉÎÓÊ £É{Ê ÎÉ{Ê £Ê
M9060G277NPK ]äääÊ ÈäÊ x{äÊ £°xÊ Ón£Ê *Ê £{£ÉnÊ ÎÇÉ£ÈÊ ÎxÉ£ÈÊ £ÓxÉnÊ £Î£É{Ê ÓÇÉ£ÈÊ Óä
M6060G277NPK È]äääÊ ÈäÊ ÎÈäÊ £°ÎäÊ £nÇÊ *Ê £{£ÉnÊ ÎÇÉ£ÈÊ ÎxÉ£ÈÊ £ÓxÉnÊ £Î£É{Ê ÓÇÉ£ÈÊ £n
M5060G277NPK x]äääÊ ÈäÊ ÎääÊ £°änÊ £xÈÊ *1 Ê £ä£ÉnÊ Î££É£ÈÊ Î£ÉnÊ nxÉnÊ £É{Ê ££ÉÎÓÊ £x
ÜÊ*ÀwiÊ/À>ÃvÀiÀ
«>VÌÊÜÊ*ÀwiÊ/À>ÃvÀiÀ
1ÃiÊÌ
ÃÊÕÕÃÊ/ÕLiÊÌ>}iÊ
>ÀÌÊ>ÃÊ>Ê}Õ`i°ÊÊÀiÊ With Power Off: 4. Connect the tube load in series with the trans-
>VVÕÀ>ÌiÊ>`}ÊÃÊLÌ>i`ÊLÞÊV`ÕVÌ}ÊÌ
iʯÊÊ-
ÀÌÊ former high voltage terminals.
ÀVÕÌÊÌiÃÌ°ÊÊ/
iÊ°-°
°Ê/iÃÌÊV>ÊLiÊ«iÀvÀi`ÊÜÌ
ÊÀÊ 1. Connect the input leads and voltmeter to the
ÜÌ
ÕÌÊÌ
iÊÕÃiÊvÊ>Ê*ÜiÀÃÌ>Ì]Ê«ÀiviÀ>LÞÊÜÌ
° transformer primary terminals.
"/
\Êi`ÕVÌÊ>««ÀÝ>ÌiÞÊ£ÊvÌÊvÀÊÌ
iÊw}ÕÀiÃÊ 2. Connect the milliamp meter to the transformer
LiÜÊvÀÊi>V
Ê«>ÀÊvÊiiVÌÀ`iðÊÊÀÊ>««ÀÝ>ÌiÊ high voltage terminals.
6Ì«iÀiÊ À>Ì}ÃÊ vÊ }
Ê *ÜiÀÊ >VÌÀÊ ÌÞ«iÊ
transformers, multiply the listed Volt-Amperes
LÞÊxx¯° 5. (1)Ê*Õ}ÊÊÌ
iÊ«ÕÌÊVÀ`ÆÊ>`ÕÃÌÊ«ÜiÀÃÌ>ÌÊvÀ
120 volts and read LOAD mA on milliamp meter.
WARNING:Ê*ÌiÌ>ÞÊ
>â>À`ÕÃÊ
}
ÊÛÌ>}iÊV>Ê
be present. Testing, handling or servicing should be È°Ê
>VÕ>ÌiÊvÀÊ*iÀViÌÊvÊ-
ÀÌÊ
ÀVÕÌ°
done only by qualified personnel. Load mA
3. (1)Ê*Õ}ÊÌ
iÊ«ÕÌÊVÀ`ÊÌÊ>Ê£ÓäÊÛÌÊÀiVi«Ì>Vi A. ¯Ê°-°
°Ê=
Short Circuit mA
(100)
*ÀVi`ÕÀiÊvÀʯʰ-°
°Ê iÊ/À>ÃvÀiÀÊ>`}\ or adjust powerstat to read 120 volts on the
(1)
Ý>«i\
Ê "/
\Ê/
ÃÊ`iÃVÀ«ÌÊÃÊvÀÊ>ÊÌÀ>ÃvÀiÀÊÜÌ
Ê volt-meter. Read the SHORT CIRCUIT mA on Load mA = 24
rated input voltage of 120. Refer to the nameplate the milliamp meter and disconnect input plug. Short Circuit mA =30
of the transformer being tested and use input voltage 24
¯Ê°-°
°Ê= (100) = 80
shown. 30
B. *À«iÀʯʰ-°
°Ê,>}iÃ
ÀÊ>``Ì>ÊvÀ>ÌÊV>Ê
/
Ê>ÌÊnää®Ê
/
ÊÈÓ{ÈÎnή ÇÇ°xÊÌÊnÓ°x¯Ê`ÀÊÀÊ"ÕÌ`ÀÊ
VÃi`®
82.5 to 85% (Cold Wi>Ì
iÀÊÊiÀVÕÀy filled tubing)
Sign Supplies
6iÌiÝÊÃivÊ>`ÕÃÌ}ÊiiVÌÀVÊ«ÜiÀÊÃÕ««iÃÊ>ÀiÊ1ÊӣȣÊV«>Ì°ÊÊi>ÌÕÀiÃʸiiÀ>ÌʸÊVÀVÕÌÀÞÊvÀÊ«ÌÕÊÃ>viÌÞÊ>`Ê«iÀvÀ>Vi°ÊʸiiÀ>ÌʸÊVÀVÕÌÀÞÊ
features include, open short and ground fault circuit protection, anti-migration circuitry, line and load regulation for consistent mA output, maximum overload protection
and "sort start technology" (SST) which virtually eliminates nuisance tripping upon start-up. Can be flashed. Requires no special tube processing.
ÊÕÌÃÊ>ÀiÊÃÕ««i`ÊÜÌ
ÊLÕÌÊ/"Ê}ÀiÌÃÊvÀÊ>ÌÌ>V
}Ê/"ÊÃiiÛ}]Ê>Ê£ä¿]ÊÎÜÀiÊ«ÜiÀÊVÀ`]Ê}ÀÕ`i`ÊÕÌ}ÊvÌÊ>`ÊÉvvÊÃÜÌV
°
Ê`iÃ]ÊiÝVi«ÌÊ6/{äÎä£Óä]Ê>ÀiÊ>Û>>LiÊÊ>ÊÓ{ä6Ê«À>ÀÞÊÛiÀðÊÊ]äää6ÊÃiV`>ÀÞÊÛiÀÃÊ>ÃÊ>Û>>LiÊÜÌ
Ê>ÊLÕÌÊÎÊiÛiÊ£ää¯ÉÈx¯É{x¯®Ê`}Ê
ÃÜÌV
°ÊÊ£Ó]äää6ÊÃiV`>ÀÞÊÛiÀÃÊ>Û>>LiÊÜÌ
Ê>ÊÓÊiÛiÊ£ää¯ÉÈx¯®Ê`}ÊÌ}}i°
Catalog Max Line
Number Sec. V. mA Volts Hz
VT4030-120 {]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT6030-120 È]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT9030-120 ]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT12030-120 £Ó]äääÊ ÎäÊ £ÓäÊ xäÉÈä VT6030 VT9030 VT12030
6
/
8Ê
/,"
Ê
Ê
//
,Ê/, -",
,-
6iÌiÝÊ1ÊӣȣÊV«>ÌÊiiVÌÀVÊV
>iÊiÌÌiÀÊÌÀ>ÃvÀiÀÃÊÕÌÊ`ÀiVÌÞÊÃ`iÊÌ
iÊiÌ>ÊiÌÌiÀÊÀÊÜÀiÜ>ÞÊi>Ì}Ê
ÕÃ}Ê>`Ê
ÕÃ}Ê
transformer usage and simplifies tube bending. These lightweight transformers reduce bracing needs, draw less current and eliminate the necessity of
ÀiÌiÊÜÀ}Ê>`ÉÀÊÀ>ViÜ>Þð
6iÌiÝÊÃiv>`ÕÃÌ}ÊV
>iÊiÌÌiÀʸiiÀ>ÌʸÊÌiV
}ÞÊvi>ÌÕÀiÃÊ«i]ÊÃ
ÀÌÊ>`Ê}ÀÕ`Êv>ÕÌÊ«ÀÌiVÌ]Ê>VÌÛiÊ>Ì}À>ÌÊVÀVÕÌÀÞ]Ê>ÝÕÊ
overload protection and broad operating temperature of -30°F to 122°F without de-rating. Requires no special tube processing.
ÊÕÌÃÊÃÕ««i`ÊÜÌ
ÊLÕÌÊ/"Ê}ÀiÌÃÊvÀÊ>ÌÌ>V
}Ê/"ÊÃiiÛ}]Ê£ÉÓ¸ÊV`ÕÌÊwÌÌ}ÊvÀÊ
>À`ÊÜÀ}]Ê}ÀÕ`i`ÊÕÌ}ÊvÌÊ>`ÊÃÕ««i`ÊÊ
white casing which eliminates shadows inside letter.
Catalog Max Line
Number Sec. V. mA Volts Hz
VT4030CL-120 (1) {]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT6030CL-120 (2) È]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT9030CL-120 (3) ]äääÊ ÎäÊ £ÓäÊ xäÉÈä
VT6060CL-120 È]äääÊ ÈäÊ £ÓäÊ xäÉÈä
VT9060CL-120 (1) ]äääÊ ÈäÊ £ÓäÊ xäÉÈä VT6030CL VT9030CL
NOTE: (1)
Also available in 277V primary version.
(2)
Also available in 240V primary version.
(3)
Also available in 240V and 277V primary versions.
Case Dimensions
VT5520-120 6/xxÓä£Óä
Catalog Number A B C D E Wt. 6/xxÓä£Óä
VT4030 5.5" 1.8" 1.25" 4.5" 0.9" 11oz
VT6030 6.5" 2.05" 1.45" 6.0" 1.03" 24oz
VT9030 6.5" 3.04" 1.51" 6.0" 1.52" 32oz
VT12030 6.5" 3.05" 2.0" 6.0" 1.52" 32oz
VT4030CL 5.5" 1.75" 1.25" 4.5" 0.9" 11oz
VT6030CL 7.3" 1.96" 1.45" 6.5" 0.94" 23oz
VT6060CL 6.65" 3.13" 1.55" 6.13" 1.55" 34oz
4
VT9030CL 6.65" 3.13" 1.55" 6.13" 1.55" 34oz
VT5520-120 4.90" 1.50" .90" 4.50" 0.75" 14oz
6/xxÓä£Óä 4.90" 1.50" .90" 4.50" 0.75" 7oz
6/xxÓä£Óä 4.90" 1.50" .90" 4.50" 0.75" 7oz
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
A-100
/, -"/
Ê
/,"
Ê/, -",
,-
Sign Supplies
Transfotec offers the most complete product line available to satisfy most lighting and signage needs through reliable solid state technology. TFT electronic
ÌÀ>ÃvÀiÀÃÊ>ÀiÊÃivÊ>`ÕÃÌ}ÊÌÊÌ
iÊi}Ì
ÊvÊÌÕLiÊÕÃi`ÊÊÕ®ÊÜÌ
ÕÌÊiÀVÕÀÞÊ}À>Ì°ÊÊ"Ì
iÀÊvi>ÌÕÀiÃÊVÕ`iÆÊ
}
Ê«ÜiÀÊv>VÌÀÉÜÊ«ÕÌÊVÕÀÀiÌ]Ê
V«>VÌÊÃâi]ÊLÀ}
Ì]ʵÕiÌÊÜÌ
ÊÕvÀÉyViÀvÀiiÊÌiÃÌÞ°ÊÊÌiÃÊÜÌ
Ê>ÊV>Ì>}ÊÕLiÀÊ«ÀiwÝÊ//*Ê`V>ÌiÊÌ
iÊ*>ÌÕÊ-iÀiÃÊÜ
V
ÊV«iÃÊÜÌ
ÊÃiV`>ÀÞÊ
}ÀÕ`Êv>ÕÌÊ«ÀÌiVÌÊÀiµÕÀiiÌÃÊÊ1ӣȣ°ÊÊ-iiÊÀ>Ì}ÊVÕÊLiÜÊvÀÊÀiÊvÀ>Ì°ÊÊ"Ì
iÀÊ`iÃÊ>ÃÊ>Û>>Li°
All transformers supplied with switch and cordset.
Catalog Max Line Overall Dimensions
Number Sec. V. mA Volts Hz Rating Fig. L x W x H (Inches)
Ê//*£ÓÎä £Ó]äääÊ ÎäÊ £ÓäÊ ÈäÊ 1Ó£È£Ê Ê {°nxÊÝÊΰ£ÊÝÊ£°n }°Ê
Ê//*£äÎä £ä]äääÊ ÎäÊ £ÓäÊ ÈäÊ 1Ó£È£Ê Ê {°n£ÊÝÊÎÊÝÊ£°ÈÓ
Ê//*Îä ]äääÊ ÎäÊ £ÓäÊ ÈäÊ 1Ó£È£Ê Ê {°nxÊÝÊΰ£ÊÝÊ£°n
Ê//*xÓä x]äääÊ ÓäÊ £ÓäÊ xäÉÈäÊ 1Ó£È£Ê Ê ÎxÉnÊÝÊÓÎÉnÊÝÊ£
Ê//äÎxäää x]äääÊ ÓäÊ £ÓäÊ ÈäÊ 1Ê Ê Î°ÈÓÊÝÊÓÊÝÊ°nÇ
Ê//äÓÓÎäää Î]äääÊ ÓäÊ £ÓäÊ ÈäÊ 1Ê Ê Î°ÈÓÊÝÊ£°xxÊÝÊ°nÇ
Ê//äÈ
äää (1) ]äääÊ ÎäÊ ÓÎäÊ xäÉÈäÊ Ê Ê {°n£ÊÝÊÎÊÝÊ£°ÈÓ
}°Ê
NOTE: (1)
Not UL listed.
/, -"/
Ê
/,"
Ê ÊEÊ- Ê/, -",
,-
Along with the features described above, the following are available with optional dimming and two different flashing features as shown below.Complies with secondary
}ÀÕ`Êv>ÕÌÊ«ÀÌiVÌÊÀiµÕÀiiÌÃÊÊ1ӣȣ°
Ordering Information
Catalog Max Line Overall Dimensions
Number Sec. V. mA Volts Hz Rating Fig. L x W x H (Inches) Items with "*" suffix indicates type of
(2)
dimming or flashing feature.
Ê //*£äÎäÎÊ £ä]äääÊ ÎäÊ £ÓäÊ ÈäÊ 1ÊÓ£È£Ê Ê {°n£ÊÝÊÎÊÝÊ£°ÈÓ
Ê //*£ÓÎäI £Ó]äääÊ ÎäÊ £ÓäÊ ÈäÊ 1ÊÓ£È£Ê Ê {°nxÊÝÊΰ£ÊÝÊ£°n "1" = Flashing, 2 level brightness, high-low.
"2" = Flashing, On-Off.
NOTE: (2)
Dimming feature only.
"3" = Dimming.
/, -"/
Ê
/,"
Ê-*
/9Ê/, -",
,-
ÊV«>VÌÊ}
ÌÊÜi}
ÌÊL>ÃiÊvÀÊiÊÃVÕ«ÌÕÀiðÊÊÌ¿ÃÊL>VÊ -Ê«>ÃÌV®ÊiVÃÕÀiÊVÌ>ÃÊ>Ê//äÎxäääÊÌÀ>ÃvÀiÀÊx]äää6ÊÓä®°ÊÊ
«iÌiÊÜÌ
ÊÃÜÌV
Ê>`Ê
cordset.
Catalog Max Line Overall Dimensions
Number Sec. V. mA Description Volts Hz Rating Fig. L x W x H (Inches)
Ê // -
äÎ x]äääÊ ÓäÊ >VÊë>ÞÊ >ÃiÊ Ê£ÓäÊ ÈäÊ 1Ê
Ê È°{ÊÝÊ{°xÊÝÊΰ{ }°Ê
VOLTARC VOLTRONIXÊ
/,"
Ê/, -",
,-
6ÌÀÝÊiiVÌÀVÊ«ÜiÀÊÃÕ««ÞÊÃÊ>ÊLÀ}
Ì]ÊÎx]Ê
}
Ê«ÜiÀÊv>VÌÀ]ÊÃivÊ>`ÕÃÌ}ÊÓ]äää6ÊÊ]äää6®Ê1ӣȣÊV«>ÌÊÌÀ>ÃvÀiÀÊÜÌ
ÊLÕÌÊ-iV`>ÀÞÊÀÕ`Ê
>ÕÌÊ*ÀÌiVÌ°ÊÊi>ÌÕÀiÃÊVÕ`iÊÜÊ
>ÀVÊ`ÃÌÀÌÊÜÌ
ÊÃ
ÀÌÊVÀVÕÌ]Ê«iÊVÀVÕÌÊ>`ÊLÀiÊÌÕLiÊ«ÀÌiVÌ°ÊÊ
>ÊLiÊÕÌi`ÊÊiÌ>ÊÃÕÀv>ViÃÊÜÌ
ÊÊÕÌÕ>ÊÊ
interference between two units and is flicker free with no mercury migration. Supplied with switch and cordset. Weighs 2.1 lbs.
Catalog Max Line Overall Dimensions
Number Sec. V. mA Volts Hz L x W x H (Inches)
VOLTRONIX ]äääÊ ÎxÊ Ê£ÓäÊ ÈäÊ Ç°£ÓxÊÝÊÓ°ÈÓxÊÝÊÓ
/, -"/
Ê"
/"*1-Ê
Ê
//
,Ê-9-/
Sign Supplies
/
iÊ//Ê"VÌ«ÕÃÊ
>iÊiÌÌiÀÊ-ÞÃÌiÊÃÊ`iÃ}i`ÊÌÊi>ÌiÊiÝÃÌ}ÊÃÌ>>ÌÊVÃÌÀ>ÌÃÊ>`ÊÌ
iÀivÀiÊÀi`ÕViÊ>LÀÊÌÊ>ÊÕ°ÊÊÌÊ>ÃÊVÀi>ÃiÃÊÃ>viÌÞÊLÞÊ
i>Ì}Ê
}
ÊÛÌ>}iÊÌ
ÀÕ}
ÊÌ
iÊÜ>ÊÃÌÀÕVÌÕÀiÊ>`ÊÃÊ1ӣȣÊV«>Ì°ÊÊÌÊÃÊV«Ãi`ÊvÊ>Ê>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊ>`Ê}
Ê6Ì>}iÊ`ÕiðÊÊ
VÃ}Ê>ÊÌ
iÊiiVÌÀVÊ
V«iÌÃÊÀiµÕÀi`ÊÌÊVÛiÀÌÊÌ
iÊV}ÊiÊvÊ£Óä6ÊÈäâÊÌÊ>ÊÌi`ÊÛÌ>}iÊ>`Ê
}
ÊvÀiµÕiVÞÊ
ÊVÕÀÀiÌÊÃÕÀVi]ÊÌ
iÊ>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊÃÊÕÃi`ÊÌÊÃÕ««ÞÊ
Ì
iÊ}
Ê6Ì>}iÊ`ÕiÃ]ÊÜ
V
ÊÊÌÕÀÊ«ÜiÀÊÌ
iÊiÊÌÕLiðÊÊ/
iÃiÊ}
Ê6Ì>}iÊ`ÕiÃÊiVÃiÊ>ÊÌÀ>ÃvÀiÀÊÌ
>ÌÊVÀi>ÃiÃÊÌ
iÊV}ÊÛÌ>}iÊÌÊ>Ê>ÝÕÊ
of 2000V at 30mA.
Ì
ÊÌ
iÊ>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊ>`ÊÌ
iÊ}
Ê6Ì>}iÊ`ÕiÊ>ÞÊLiÊÕÃi`ÊvÀÊ`ÀÊÀÊÕÌ`À]ÊÜi>Ì
iÀ«ÀvÊ>««V>ÌðÊÊÃÊÀiµÕÀi`ÊvÀÊÕÌ`ÀÊ>««V>ÌÃ]ÊÌ
iÊ
>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊÕÃÌÊLiÊ«>Vi`ÊÊ>ÊÃi«>À>ÌiÊÜi>Ì
iÀ«ÀvÊiVÃÕÀi°ÊÊÃÊvÀÊÌ
iÊ}
Ê6Ì>}iÊ`Õi]ÊÌÊÕÃÌÊLiÊV>Ìi`ÊÃ`iÊ>ÊiVÃi`ÊiÌÌiÀ°
Safety features include no high voltage through wall structure, maximum voltage of 2000Vrms between any electrode and chassis ground. Also, automatic shut off
during ground fault, broken tube and loading overload condition and LED indication of fault condition with diagnostic feature for troubleshooting purposes.
//"
//
ÊÕÃÌÊLiÊÕÃi`ÊÜÌ
ÊiÊ>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊ*-®Ê>`Ê>ÊÕÊvÊÌ
ÀiiÊÈäÊ}
Ê6Ì>}iÊ`ÕiÃÊ6È®°ÊÊ*ÀÛ`i`ÊÜÌ
Ê>ÊÎÊ«ÃÌÊÃÜÌV
Ê
ÌÊVÌÀÊÌ
iÊÕÌ«ÕÌÊVÕÀÀiÌ°ÊÊ-ÜÌV
Ê«ÃÌÃÊ>ÀiÊ1/"]ÊÎäÊ>`ÊÈä°ÊÊÊÌ
iÊÎäÊ>`ÊÈäÊ«ÃÌ]ÊÌ
iÊÌi«iÀ>ÌÕÀiÊÃiÃÀÊ`iÃÊÌÊÜÀÊ>`ÊÌ
iÊÕÌ«ÕÌÊ
VÕÀÀiÌÊÃÊ>VVÀ`}ÊÌÊÌ
iÊÃÜÌV
°ÊÊÊ1/"Ê`i]ÊÌ
iÊ/
ÊÜÊÃÜÌV
ÊÌ
iÊVÕÀÀiÌÊ>ÌÊÌ
iÊÌÕLiÃÊ>ÌÊÈäÊÜ
iÊÌ
iÊÌi«iÀ>ÌÕÀiÊÃiÃÀÊÀi>V
iÃÊxc
ÊÀÊLiÜ°ÊÊ/
iÊ
VÕÀÀiÌÊÊÌ
iÊÌÕLiÃÊÜÊÀi>Ê>ÌÊÈäÊÕÌÊÌ
iÊÌi«iÀ>ÌÕÀiÊÃiÃÀÊÀi>V
iÃÊ£äc
ÊLivÀiÊÃÜÌV
}ÊÌÊL>VÊÌÊÎä°ÊÊ/
ÃÊÌi«iÀ>ÌÕÀiÊ
ÞÃÌiÀÃÃÊÃÊLÕÌÊÌÊ>Û`Ê
unstable condition near the switch point.
Catalog Overall Dimensions Master
Number Description L x W x H (Inches) Power Supply
Ê//"
/*- >ÃÌiÀÊ*ÜiÀÊ-Õ««Þ (1) ÊÊÊÇ°xÊÝÊÈ°nxÊÝÊÓ°xx
//"
/6Î }
Ê6Ì>}iÊ`Õi]ÊÎäÊ Î°£ÎÊÝÊ£°ÈÎÊÝÊ£ High Voltage
//"
/6È }
Ê6Ì>}iÊ`Õi]ÊÈäÊ Î°£ÎÊÝÊ£°ÈÎÊÝÊ£ Module
Ê//"
//
ÜÊ/i«Ê
ÌÀÊ`ÕiÊ Ç°xÊÝÊÈ°nxÊÝÊÓ°xx
NOTE: (1)
Ê>ÃÌiÀÊ*ÜiÀÊ-Õ««ÞÊÃÊÀ>Ìi`Ê£ä{cÊ>Ý°
NOTE:Ê Ê 7Ì
Ê >Ê Vw}ÕÀ>ÌÊ vÊ iÃÃÊ Ì
>Ê £äÊ °6°Ê `ÕiÃ]Ê Ì
iÊ
maximum loading of the system is determined by the number of modules
Li}ÊÕÃi`Ê>`ÊÌ
iÊ>ÝÕÊ>`}ÊvÊÌ
iÊ°6°Ê`Õi°
IÊÀ}ÊÉÊiÀVÕÀÞÊwi`ÊÌÕLiÃÊ
>ÛiÊÛiÀÞÊÜÊLÀ}
ÌiÃÃÊ>ÌÊÜÊÌi«iÀ>ÌÕÀi]Ê
ÈäÊ°6°Ê`ÕiÃÊ>ÀiÊÀiVi`i`ÊvÀÊÌ
ÃÊÌÞ«iÊvÊ>««V>Ì°ÊÊ
>V
Ê
electrode pair is equivalent to one foot of tube length.
Catalog
Number Description
EGL-NDC iÊë>ÞÊ
>ÃiÊÜÉ
Ê>ÃÃ
EGL-CL-CASE iÊë>ÞÊ
>ÃiÊÜÉ
Ê
ÊiÃ}iÀÊ-iÀiÃÊ>ÃÃ
WHO-NSC iÊë>ÞÊ
>ÃiÊÜÉ6Ì>ÀVÊ>ÃÃ WHO-NSC
*"
Ê
-
Sign pole flanges integrate a smaller pole into a larger one.
Ã`iÊy>}iÊë>ViÃÊÌ
iÊÌÜÊ«iÃÊ>`ÊV>«Êy>}iÊ«ÃÌÃÊÌ
iÊ Cap
inside pole height relative to the outside pole. Two inside flanges >}i
>ÀiÊÀ>ÞÊÕÃi`°ÊÊ>}iÃÊ>ÀiÊÎÉn¸ÊÌÊ£ÉÓ¸ÊÌ
VÊ`i«i`}Ê
ÊÃâi°ÊÊÛ>>LiÊÕ«ÊÀiµÕiÃÌ°
2nd
Inside
>}i
Inside
>}i
Sign Supplies
Dynapc rotating units are reliable and designed to combat the three key elements which discourage rotating sign usage; wind, weather and wear. Dynapac's patented
torque relief mechanism and rigid bearing assembly absorb all the wind load on the revolving sign by slipping harmlessly and transferring bending load to the sign pole
eliminating costly rotator damage. Dynapac's weather-shielded water-proof bearings, shafts and housing are protected from all forms of intense weather. Torque relief
mechanism is self-adjusting which compensates for wear.
ÊÕÌÃÊÃÌi`ÊLiÜÊVÕ`iÊÓÊVÀVÕÌÊÎÀ}®ÊViVÌÀÊÀ}Ê>`ÊLÀÕÃ
Ê>ÃÃiLÞ°ÊÊÌÊÃÊÀiVi`i`ÊÌ
>ÌÊ>ÊiÕÌÀ>ÊVÀVÕÌÊLiÊ>``i`ÊvÀÊi>V
ÊÌÜÊ£xÊ>«Ê
ÌÊVÀVÕÌðÊÊ
Û>>LiÊÜÌ
ÊÓÊÌÊÊÀ}ðÊÊ£xÊ>«ÃÊ«iÀÊÀ}ÊV>«>VÌÞ°ÊÊ-«iV>Ê,*Ê>Û>>LiÊÕ«ÊÀiµÕiÃÌ°ÊÊi>ÌÊÌÀi>Ìi`ÊÕÌ}ÊLÌÃÊ>`ÊVÕÌÃÊvÕÀÃ
i`°
Catalog Model Specifications Dimensions (Inches)
Number Number Max. Weight >Ý°Ê/ÀµÕi
Capacity lb. Capacity ft./lb.
Max. Shear
Load lb.
Max. Bearing Bearing Shaft
Load ft./lb. Diameter In.
Motor
Hp.
RPM
Standard
Approx.
Shipping Wt. A B C D E F G H
DYN-H-20 ÓäÊÜÉÀ>iÊ ÎÓäÊ ÓäÊ {näÊ £äää £°ÎÇxÊ £É£ÓÊ x£ÉÓ Î£Ê £ÎÊ {ÎÉ{Ê £ÉnÊ Dia.
Ó Ê ÊÊ ÊÊ ÎÉ{Ê £Ó
Sq.
9 ÓxÊ ÓxÊÜÉÀ>iÊ xääÊ ÇäÊ £änäÊ £äää £°ÎÇxÊ £É{Ê È nÇÊ £ÇÊ n£ÉÓÊ ÎÉ£ÈÊ {ÎÉ{ Ê Êx£ÉnÊ £ÉÓÊÊ £ÓÊ £{
9 ÎÈÊ ÎÈÊÜÉÀ>iÊ ÇÓäÊ ÇäÊ £{ÇäÊ £Óää £°ÇÇ£Ê £É{Ê È Ê £nÊ n£ÉÓÊ £É{Ê Ç Sq.Ê ÊÇÊ xÉnÊ £xÊ £n£ÉÓ
9 näÊ näÊÜÉÀ>iÊ ÓäääÊ ÇäÊ Ó£ääÊ Ó{x £°ÇäÊ £É{Ê È £Î£Ê ÓÓÊ £ÉÓÊ ÎÉnÊ xÎÉ{ Dia.Ê {ÎÉ{Ê ÇÉ£ÈÊ £È£É{Ê £n£Én
9 £ääÊ £ääÊÜÉÀ>iÊ Î£ÓäÊ ÇäÊ Ó£ääÊ ÎÎää £°ÈnÊ £É{Ê È £{{Ê ÓÓÊ £ÉÓÊ ÎÉnÊ n Sq.Ê nÊ ÎÉ{Ê £È£É{Ê Óä
9 ÓääÊ ÓääÊÜÉÀ>iÊ {ÓääÊ ÇäÊ Ó£ääÊ äää Ó°ÇxäÊ £É{Ê È £{Ê ÓÓÊ £ÉÓÊ £ÉÓÊ £ä Dia.Ê nÊ ÎÉ{Ê £È£ÉÓÊ Óä£ÉÓ
DYN-K-36 ÎÈÊÜÉÀ>iÊ ÇÓäÊ £xäÊ £{ÇäÊ £Óää £°ÇÇ£Ê £É{Ê È £äxÊ £nÊ n£ÉÓÊ £É{Ê Ç Sq.Ê ÇÊ xÉnÊ £xÊ £n£ÉÓ
DYN-K-80 näÊÜÉÀ>iÊ ÓäääÊ £xäÊ Ó{ÎäÊ Ó{x £°ÇäÊ £É{Ê È £ÎÇÊ ÓÓÊ £ÉÓÊ ÎÉnÊ xÎÉ{ Dia.Ê {ÎÉ{Ê ÇÉ£ÈÊ £È£É{Ê £n£Én
DYN-K-100 £ääÊÜÉÀ>iÊ Î£ÓäÊ £xäÊ În{äÊ ÎÎää £°ÈnÊ £É{Ê È £xäÊ ÓÓÊ £ÉÓÊ ÎÉnÊ n Sq.Ê nÊ ÎÉ{Ê £È£É{Ê Óä
DYN-K-200 ÓääÊÜÉÀ>iÊ {ÓääÊ £xäÊ {xääÊ äää Ó°ÇxäÊ £É{Ê È ÓääÊ ÓÓÊ £ÉÓÊ £ÉÓÊ £ä Dia.Ê nÊ ÎÉ{Ê £È£ÉÓÊ Óä£ÉÓ
DYN-L-100 £ääÊÜÉÀ>iÊ Î£ÓäÊ ÎÇxÊ {ÈnäÊ ÎÎää £°ÈnÊ ÎÉ{Ê { ÓääÊ ÓÇÊ ££Ê ÎÉnÊ n Sq.Ê nÊ ÎÉ{Ê £È£É{Ê Óä
DYN-L-200 ÓääÊÜÉÀ>iÊ {ÓääÊ ÎÇxÊ ÇxääÊ äää Ó°ÇxäÊ ÎÉ{Ê { ÓxÓÊ ÓÇÊ ££Ê £ÉÓÊ £ä Dia.Ê nÊ ÎÉ{Ê £È£ÉÓÊ Óä£ÉÓ
DYN-L-350 ÎxäÊÜÉÀ>iÊ n{ääÊ ÎÇxÊ äääÊ £äää ΰÎÇxÊ ÎÉ{Ê { {ÓxÊ ÓÇÊ ££Ê ÎÉ{Ê £{ Dia.Ê ££Ê £Ê ££ÉÓÊ Óx£ÉÓ
DYN-L-200C Óää
ÊÜÉÀ>iÊ {ÓääÊ ÈxäÊ ÇxääÊ äää Ó°ÇxäÊ ÎÉ{Ê Ó {ääÊ ÎÊ £ÎÊ £ÉÓÊ £ä Dia.Ê nÊ ÎÉ{Ê £È£ÉÓÊ Óä£ÉÓ
DYN-L-350C Îxä
ÊÜÉÀ>iÊ n{ääÊ ÈxäÊ äääÊ £äää ΰÎÇxÊ ÎÉ{Ê Ó xääÊ ÎÊ £ÎÊ ÎÉ{Ê £{ Dia.Ê ££Ê £Ê ££ÉÓÊ ÓÓ£ÉÓ
,Ì>ÌÀÊÜÌ ÊÀ>i
,Ì>ÌÀÊ`iÃ}>ÌÃÊÊÃâ}ÊV
>ÀÌÃÊÌ>iÊÌÊVÃ`iÀ>ÌÊÃ
i>ÀÊ>`Ê
bending load based on 100 mph wind loading with a 3 to 1 safety
v>VÌÀ]ÊÜi}
ÌÊvÊÃ}ÊL>Ãi`ÊÊÓäÊLðʫiÀÊõ°ÊvÌ°Ê>`ÊÌÀµÕiÊL>Ãi`ÊÊ
rotator clutch allowing sign to stall in 30 to 40 mph winds. Dynapac
units are listed with UL and Canadian Standards Association. Sternly
ÌiÃÌi`ÊvÀÊÃÌÀi}Ì
ÊLÞÊ>Ê>Ì>ÞÊÜÊÌiÃÌ}Ê>LÀ>ÌÀÞÊ>`ÊiiÌÊ
ÀiµÕÀiiÌÃÊvÊ>ÞÊÀÕ}}i`ÊÕÃi°
Þ>«>VÊÀÌ>ÌÀÊÃâ}Ê>`ÊÀ`iÀ}ÊÃÌÀÕVÌÃÊvÀÊõÕ>ÀiÊ>`ÊÀiVÌ>}Õ>ÀÃ
>«i`ÊÃ}Ã\
Step 1: Choose desired installation from Fig. I, II, III, IV and V.
Step 2: Use appropriate sizing chart and find width of sign in feet (across top of chart), then come down column to height of sign in feet (down
Ã`iÊvÊV
>ÀÌ®Ê>`ÊÀi>`ÊÀÌ>ÌÀÊ`iÊÊ>««À«À>ÌiÊõÕ>Ài°
-Ìi«ÊÎ\ÊÊiÌiÀiÊiiVÌÀV>Ê>`ÊLÞÊw}ÕÀ}ÊiÊViVÌÀÊÀ}ÊvÀÊi>V
Ê£xÊ>«ÃÊÀiµÕÀi`°ÊÊÃÊ>``ÊiÊiÕÌÀ>ÊViVÌÀÊÀ}ÊvÀÊi>V
ÊÌÜÊ£xÊ
amp hot rings. (3-ring collector ring and brush assembly supplied as standard.)
Step 4: Determine what accessories are needed for proper installation.
}°Ê
Rotator inside sign above centerline with frame
}°Ê
Rotator on top of sign
}°Ê
Rotator in "C" frame from side support
Sign Supplies
}°Ê6
Rotator with frame outside and under sign,
frame stationary
}°Ê6
Rotator with frame outside and under sign,
frame rotates with sign
>ÌV
}Ê«>ÌiÃÊ>ÀiÊy>ÌÊÃÌiiÊVÀVÕ>ÀÊ«>ÌiÃ]Ê`Ài`ÊÌÊ>ÌV
ÊÌ
iÊVÀÀië`}Ê
iÃÊÊÌ
iÊÀÌ>Ì}ÊÕÌÊÌÕÀÌ>Li°ÊÊ
>ÊLiÊ
conveniently welded to the supporting sign pole or the sign itself, thus simplifying the rotator attachment.
-«iV>ÊÃâiÃÊ>`iÊÕ«ÊÀiµÕiÃÌ°
Catalog Number Weight
Number Description A B C D E of Holes (lbs.)
DYN-637-148 >ÌV
}Ê*>Ìi]ÊÈ£É{¸Ê>°]ÊÓä]ÊÓx®Ê È£É{Ê £ÉÓÊ x£ÉnÊ É£ÈÊ ££ÉnÊ {Ê Ç
DYN-637-149 >ÌV
}Ê*>Ìi]ʸÊ>°]ÊÎÈÊ-iÀiÃ®Ê Ê £ÉÓÊ ÇÊ ££É£ÈÊ ££ÉnÊ {Ê ££
DYN-637-159 >ÌV
}Ê*>Ìi]Ê£ä¸Ê>°]ÊnäÊ-iÀiÃ®Ê £äÊ xÉnÊ {ÎÉ{Ê £ÉÓÊ ££ÉnÊ xÊ £È
DYN-637-150 >ÌV
}Ê*>Ìi]Ê£ä¸Ê>°]Ê£ääÊ>`ÊÓääÊ-iÀiÃ®Ê £äÊ xÉnÊ nÊ £ÎÉ£ÈÊ ££ÉnÊ {Ê £È
DYN-637-151 >ÌV
}Ê*>Ìi]Ê£{¸Ê>°]ÊÎxäÊ-iÀiÃ®Ê £{Ê ÎÉ{Ê ££Ê ££É£ÈÊ ££ÉÓÊ {Ê În
Sign Supplies
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÌVÃÊ>ÊÜ`iÊÛ>ÀiÌÞÊvÊÌÕL}Ê>`Ê
ÃiÊvÀÊÌ
iÊLi`}Ê>`Ê
«ÀViÃÃ}ÊÃÌ>}iÃÊÊiÊÌÕLiÊv>LÀV>Ì°ÊÊÌiÃÊÜÌ
Ê>ʸ9¸Ê«ÀiwÝÊ>ÀiÊ>LiÀÊ
ÃÕÀ}V>Ê>ÌiÝÊÌÕL}°ÊÊÌiÃÊÜÌ
Ê>ʸ ¸ÊÊ«ÀiwÝÊ>ÀiÊÀi`Ê}ÕÊÀÕLLiÀ°ÊÊ/,È{änÊ
is black Viton tubing.
Catalog Put
Number I.D. Wall Application Up
HYG-00577 £Én¸Ê ÎÉÈ{¸Ê ÜÊÃiÊ £¿É£ää¿
HYG-00604 £É{¸Ê £Én¸Ê >`Ê/ÀV
Ê £¿É£ää¿
HYG-00613 xÉ£È¸Ê ÎÉÎÓ¸Ê
ÀÃÃÊÀiÊ £¿Éxä¿
HYG-00622 ÎÉn¸Ê ÎÉÎÓ¸Ê
ÀÃÃÊÀiÊ £¿Éxä¿
HYG-00637 £ÉÓ¸Ê £Én¸Ê ,LLÊ ÕÀiÀÊ £¿Éxä¿
HYD-12066 xÉn¸Ê ÎÉn¸Ê iÊ*Õ«Ê £¿
LAB-R8200-14 £É{¸Ê ÎÉ£È¸Ê *À>Ê>Õ}iÊ £¿
LAB-R8200-25 ÇÉ£È¸Ê xÉ£È¸Ê }
Ê6>VÕÕÊÃiÊ £¿
LAB-8200-29 ÇÉn¸Ê ÎÉn¸Ê V>ÌiÊ*Õ«ÃÊ £¿
LAB-R8250-7 £Én¸Ê £Én¸Ê }
Ê6>VÕÕÊ/ÕLÕ>ÌÊ £¿
TRA-96408 £Én¸Ê £Én¸Ê }
Ê6>VÕÕÊ/ÕLÕ>ÌÊ £¿ÉÓx¿
DYNAPAC TURNTABLES
Þ>«>VÊ`iÃÊÓÊ>`Ê{Ê>ÀiÊV«>VÌÊÞiÌÊ«ÜiÀvÕÊ
rotators. The torque relief mechanism slips harmlessly under
load to provide a unique safety feature. Extreme versatility
allows installation on ceiling, floor, wall or inside mount.
Þ>«>VÊ`iÃÊ,ÎääÊ>`Ê,ÈääÊÌÕÀÌ>LiÃÊ>ÀiÊ`iÃ}i`Ê
with reliability, stability and ruggedness in mind. Reliability is Ê,Ì>ÌÀÉ/ÕÀÌ>Li
built in with precision nylon tapered roller wheels that provide
a quiet rolling surface on a machined race. A safety torque
relief clutch provides assurance that the turntable will slip
under overloaded conditions, rather than create a dangerous
motor burnout. The three-wire grounded, switched input cord
>iÃÊÃÌ>>ÌÊëiÊ>`Êi>ÃÞ°ÊÊ/
iÊÃâ>LiÊ£x¸ÊÌÕÀÌ>LiÊ
provides a stable mounting surface that gives action attraction
to any display need.
Catalog
Number Description ,Ê/ÕÀÌ>Li
DYN-IG-2.5 £xäÊL°Ê
>«>VÌÞÊ,Ì>ÌÀÉ/ÕÀÌ>Li
DYN-IG-4 ÎääÊL°Ê
>«>VÌÞÊ,Ì>ÌÀÉ/ÕÀÌ>Li
DYN-IR-300 300 lb. Capacity Turntable
DYN-IR-600 ÈääÊL°Ê
>«>VÌÞÊ/ÕÀÌ>Li
-*
/" Ê
,/Ê",ÊDYNAPAC TURNTABLES
Model Weight RPM's Safety Main Overall Bolt
Number Capacity Available Electrical Clutch Bearings Drive Size Pattern
IG-2 £xäÊLðÊÊ £]ÊÓÊ-Ì>`>À`®]ÊÈÊ £äÊ>ÌÊ££ä6Ê -Ì>`>À`Êi>ÌÕÀiÊ Ê Ê È°Çx¸ÝÊ7ΰn¸ÝÊÈ°x¸
IG-4 ÎääÊLðÊÊ £]ÊÓÊ-Ì>`>À`®]ÊÎÊ £äÊ>ÌÊ££ä6Ê -Ì>`>À`Êi>ÌÕÀiÊ -i>i`Ê >Ê -«Ê/}Ê iÌÊ °x¸ÝÊ7ΰx¸ÝÊ°Óx¸
{]ÊxÊÀÊÈÊ ÎÊ,}Ê
iVÌÀÊ,}®Ê Ê Ê Ê Ê
IR-300 ÎääÊLðÊÊ £]ÊÓÊ-Ì>`>À`®]ÊÎÊ £äÊ>ÌÊ££ä6Ê -Ì>`>À`Êi>ÌÕÀiÊ ÎÊ-i>i`Ê >Ê -«Ê/}Ê iÌÊ i}
ÌÊÈxÉn¸Ê -ÝÊÎÉn¸Ê
{]ÊxÊÀÊÈÊ ÓÊ,}Ê
iVÌÀÊ,}®Ê Ê Ê Ê >iÌiÀÊ£x¸Ê Ê£Ó£ÉÓ¸Ê °
°
IR-600 ÈääÊLðÊÊ £]ÊÓÊ-Ì>`>À`®]ÊÎÊ £äÊ>ÌÊ££ä6Ê -Ì>`>À`Êi>ÌÕÀiÊ ÈÊ-i>i`Ê >Ê ,Õ}}i`Ê-«ÕÀÊi>ÀÊ i}
ÌÈxÉn¸Ê -ÝÊÎÉn¸Ê
{]ÊxÊÀÊÈÊ ÓÊ,}Ê
iVÌÀÊ,}®Ê Ê Ê Ê >iÌiÀ£x¸Ê Ê£Ó£ÉÓ¸Ê °
°
NOTE:ÊÊ>À}iÀÊV>«>VÌÞÊÕÌÃ]ÊëiV>ÊÌ]ÊÌ
iÀÊ,*ÃÊ>`Êëii`ÊVÌÀÃÊ>Û>>LiÊÕ«ÊÀiµÕiÃÌ°
SignComp extrusions and accessories offer a cost effective system for creating cabinets for rigid or flexible faced signs. Extrusions are available in stock lengths or in pre-cut
kits. The following pages show these extrusions, give specifications and illustrations for different frame and retainer combinations and provide fabrication information.
Pre-cut kits are available for most cabinets sizes, refer to page B-9 for ordering and application guidelines.
Catalog
Number Description/Application Finish Length Cross Section Assembly
Extrusions
Wide Sign Cabinet Body
SIC-2005 Use for Double-Faced Signs of 15" to 17-3/4" depth Mill 24' - 5"
Size typically limited by the ability and difficulty
to open and support hinged sign face for servicing
SIC-2055 Hingeable 1-1/2" Retainer for Rigid Faces Mill 24' - 5"
SIC-2045 Hingeable 2-1/4" Retainer for Rigid Faces Mill 24' - 5"
SIC-2065 Hingeable Dual Frame Retainer for Rigid or Flexible Faces Mill 24' - 5"
SIC-2075 Hingeable 2-1/4" Dual Frame Cover for Rigid or Flexible Faces Mill 24' - 5"
SIC-2085 Hingeable Tension Frame for Flexible Faces Mill 24' - 5"
SIC-2095 Bleed Tension Frame Cover for Flexible Faces Mill 24' - 5"
SIC-2084 1-1/2" Tension Frame Cover for Flexible Faces Mill 24' - 5"
SIC-2138 2" Divider Bar for Rigid Faces Mill 24' - 5"
SIC-2128 2-3/4" Divider Bar for Rigid Faces Mill 24' - 5"
SIC-2142 2-1/2" Dual Divider Bar for Rigid or Flexible Faces Mill 24' - 5"
SIC-2146 Dual Divider Bar Cover for Rigid or Flexible Faces Mill 24' - 5"
SIC-1671 6" Radius Extrusion, Quarter Round End Mill 24' - 2"
SIC-1672 6" Radius Extrusion, Quarter Round Pole Cover Mill 24' - 2"
Extrusions
SIC-1673 8-1/2" Radius Extrusion, 3-Part End Mill 24' - 2"
SIC-2105 Bleed Retro Frame for Flexible Faces Mill 24' - 5"
SIC-2122 Bleed Retro Frame Cover for Flexible Faces Mill 24' - 5"
SIC-2112 2" Retro Frame for Flexible Faces Mill 24' - 5"
SIC-2115 2-3/8" Retro Frame Cover for Flexible Faces Mill 24' - 5"
SIC-2092 Bleed Fascia Frame for Flexible Faces Mill 24' - 5"
SIC-2094 1-1/2" Fascia Frame for Flexible Faces Mill 24' - 5"
SIC-4560 1-1/2" Single Face Body Retainer Corner for Rigid Faces Mill 9" Radius
4 Piece Kit
SIC-4530 1-1/2" Medium Body Retainer Corner for Rigid Faces Mill 9" Radius
4 Piece Kit
SIC-4500 1-1/2" Wide Body Retainer Corner for Rigid Faces Mill 9" Radius
4 Piece Kit
Tension Clip
SIC-5360 Place clips 1-1/2" in from the edge of face material. For faces larger than 10', add 1/4" per 5 feet.
For SIC-2065, SIC-2112 or SIC-2094, space clips 6" on center.
For SIC-2085, SIC-2105, SIC-2092 or SIC-2142, space clips 5" on center.
SIC-5305 À>iÊ
ÀiÀÊ}i]Ê£ÎÉ{¸ÊÝÊ£ÎÉ{¸ÊÝÊ£É{¸ÊÊUÊÊ££É£È¸
SIC-5300 Û`iÀÊ
ÀiÀÊ}i]Ê£ÎÉ{¸ÊÝÊ£ÎÉ{¸ÊÝÊ£É{¸ÊÊUÊÊ££É£È¸ÊÜÉ ÌV
iÃ
SIC-5170 }iÊ-VÀiÜÊUÊ/ÊÃÌ>]Ê«Ài`ÀÊÎÉn¸Ê
iÃÊÌ
ÀÕ}
ÊÌ
iÊÀiÌ>iÀÊ>}ÊÌ«]ÊÎȸÊÊViÌiÀ
1/4" x 1/2" Stainless Allen Head
SIC-5180
ÃÕÀiÊ-VÀiÜÊUÊÃÌ>Ê>}ÊÃ`iÃÊ>`ÊLÌÌ]Ê{n¸ÊÊViÌiÀ
1/4" x 3/4" Stainless Machine Screw
ÛiÀÊ-VÀiÜÊUÊÃÌ>ÊÎȸÊÊViÌiÀ
SIC-5195Ê ££ÉÓ¸Ê,iÌ>iÀÊ-VÀiÜÊUÊÓÊ«iÀÊL>VÊVÀiÀÊiÞ
#8 x 1/4" Stainless Panhead SMS
ÀiÀÊ}iÊ-VÀiÜÊUÊÃÌ>ÊÓÊ«iÀÊÀiÌ>iÀÊVÀiÀ]Ê{Ê«iÀÊL`ÞÊVÀiÀ
Ê Ê >>ÃÌÊ À>ViÌÊ-VÀiÜÊUÊÃÌ>ÊÓÊ«iÀÊL>>ÃÌÊLÀ>ViÌ
SIC-5218Ê À>iÊ À>ViÊ-VÀiÜÊUÊÃÌ>ʣʫiÀÊvÀ>iÊLÀ>Vi
Ê Ê ,>`ÕÃÊ
ÀiÀÊ-VÀiÜÊUÊÃÌ>Ê{Ê«iÀÊVÀiÀ
#10 x 1/2" Stainless Hex Washer Tapping Screw - Type A
SIC-5290 ,>ViÜ>ÞÊ
ÛiÀÊ-VÀiÜÊUÊÃÌ>ÊÓ{¸ÊÊViÌiÀ
#8 x 1/2" Coated Hex Washer Slotted Screw - Type A
Extrusions
SIC-2056 1-3/8" Molding Mill 24' - 5"
1-3/8" Molding
2-1/4" Retainer
2-1/4" Retainer
Extrusions
Hingeable Retainer Extrusions for Rigid Plastic Faces
Õ>ÊÀ>iÊUÊ*>ÀÌÊÓäÈx Ó£É{¸Ê,iÌ>iÀÊUÊ*>ÀÌÊÓä{x ££ÉÓ¸Ê,iÌ>iÀÊUÊ*>ÀÌÊÓäxx
Ó£É{¸ÊÕ>ÊÀ>iÊ
ÛiÀÊUÊ*>ÀÌÊÓäÇx
Radius Extrusions
n£ÉÓ¸Ê,>`ÕÃÊÎÊ*>ÀÌÊ
`ÊUÊ*>ÀÌÊ£ÈÇΠȸÊ,>`ÕÃÊ+Õ>ÀÌiÀÊ,Õ`Ê
`ÊUÊ*>ÀÌÊ£ÈÇ£ ȸÊ,>`ÕÃÊ+Õ>ÀÌiÀÊ,Õ`Ê*iÊ
ÛiÀÊUÊ*>ÀÌÊ£ÈÇÓ
Ó¸Ê,iÌÀÊÀ>iÊUÊ*>ÀÌÊÓ££Ó ii`Ê,iÌÀÊÀ>iÊUÊ*>ÀÌÊÓ£äx
ÓÎÉn¸Ê,iÌÀÊÀ>iÊ
ÛiÀÊUÊ*>ÀÌÊÓ££x ii`Ê,iÌÀÊÀ>iÊ
ÛiÀÊUÊ*>ÀÌÊÓ£ÓÓ
££ÉÓ¸Ê>ÃV>ÊÀ>iÊUÊ*>ÀÌÊÓä{
Extrusions
a. Use 3" x 3" square or 3" round steel pipe with SIC-2015 medium body.
b. Use up to 4" x 6" steel tube with SIC-2005 wide body.
4. Flexible vinyl fabric requirements:
a. For SIC-2065 dual frame, SIC-2112 2" retro frame & SIC-2094 1-1/2" fascia frame:
Add 1-1/2" of face material on all four sides to the outside dimension of the assembled frame.
(Add a total of 3" of face material to both the height and width of the assembled frame.)
b. For SIC-2142 dual divider:
Measure from the center of the dual divider and add 1-1/2" of face material to all four sides.
(Add a total of 3" of face material to both the height and width of the assembled frame. Measure from the center of the dual divider.)
c. For SIC-2085 tension frame, SIC-2105 bleed retro frame & SIC-2092 bleed fascia frame:
Add 3" of face material on all four sides to the outside dimension of the assembled frame.
(Add a total of 6" of face material to both the height and width of the assembled frame.)
5. Compression bracing for flexible vinyl faces:
a. For SIC-2065 dual frame, SIC-2085 tension frame & SIC-2142 dual divider:
Place a vertical frame brace/frame support tube assembly approximately every 36" on center.
Cut and insert horizontal pieces of frame support tube approximately every 36" in between the vertical assemblies.
b. For retro frames:
Where the retro frame is carrying the compression load, placement of the frame brace/frame support tube assembly is as per dual frame, tension frame and dual divider.
6. Wind bracing for rigid plastic faces:
a. For SIC-2045 2-1/4" retainer & SIC-2065 dual frame:
The frame brace/frame support tube assembly may be used to tie the top retainer to the bottom retainer for large hingeable face applications.
b. For SIC-2128 2-3/4" divider & SIC-2138 2" divider:
Place a minimum of one vertical frame brace/frame support tube assembly in the center of each 12' span. (12' span, on assembly - 18' span, two assemblies.)
c. Place the frame brace/frame support tube assemblies directly between parallel lamps, but not directly in front of parallel steel support structures.
Frame brace/frame support tube assemblies that are perpendicular to lamps will not cast shadows.
7. Kit ordering:
Please supply the following information when ordering kits:
Date required
Overall kit size (height and width) Add in flex sign cabinet kit:
Number of kits "W" Included in rigid sign cabinet kit: Tension clips
Body extrusions Cut to size and mitred body extrusion Frame braces
Retainer extrusions Cut to size and mitred retainers
Single face or double face All fasteners except raceway cover screws
All body and frame corner angles
Finish (mill or otherwise) All corner keys
Face type (rigid or flexible) Ballast bracket (s)
Raceway necessary? (yes or no)
"H" "W"
"H"
Catalog Stock
Number Description/Application Finish Length Mfgr. Cross Section Assembly
1-3/4"
INT-WW Wireway with Snap Cover Mill 25' (1) -
1-7/8"
Border Frame
MRW-PF14 Fits .375" Thick Faces Mill 24' - 3" MRW
Recessed flange allows invisible fastening to wall
Border Frame
MRW-PF75 Fits .177" Thick Faces Mill 24' - 3" MRW
Recessed flange allows invisible fastening to wall
Extrusions
McGill has improved the standard shapes used by the sign industry for many years. Designed with additional wall
thickness for 3/16" thick corner angles. "F" retainers are soft aluminum, easily formed by hand around rounded or
irregular shapes. Additional shapes available upon request.
Catalog
Number Description Finish Length Illustration
SIGNCOMP
Aluminum Architectural Systems
-
,
-Ê£ÊUÊ£Én¸Ê1 1Ê
Ê Ê*"-/Ê-9-/
Available either in stock lengths or in cut-to-size kits which include extrusions, caps and screws.
Assembly components are also available separately. Removable caps allow faces to slide out
from post for easy sign changing. Slotting the post accommodates custom face heights.
Catalog Cross
Number Description Finish Length Section Removable Caps on Posts
-
,
-ÊÓÊUÊÓ¸Ê*"-/ÊEÊ*
Ê-9-/
Available in stock lengths or in cut-to-size kits which include extrusions, caps and screws.
Components are also available separately. Removable caps allow reveal to slide out for easy
sign changing. By selecting the appropriate post grooves, reveal can be positioned 3/8" or
Extrusions
SIC-1120 Bleed Body Mill 24' - 2" Removable Caps on Posts SIC-1100 Square Post with
Shown with SIC-1200 reveal SIC-1200 Reveal and
Slide Body below body space SIC-1120 Bleed Body
SIC-1110 Top body can be removed Mill 24' - 2" Shown with fixed faces attached
for face change
SIC-5260 Square Cap, 0" Tab
SIC-5261 Square Cap, 3/8" Tab Mill -
SIC-5262 Square Cap, 3/4" Tab
Cap Screw
SIC-5040 #10 x 1/2" Stainless Phil. - -
Countersunk Screw - Type A
Reveal to Body Screw
SIC-5220 #10 x 3/4 Stainless Hex Washer - -
Tapping Screw - Type A
Ordering Information
Kits contain: posts, reveals, bodies, caps, corner angles and screws.
Please supply the following information when ordering pre-cut kits:
Post length (include section below grade/foundation).
Body type (bleed or slide).
Body overall height (H) and width (W).
Extrusions
Catalog Cross
Number Description Finish Length Section
-
,
-ÊÎÊUÊΣÉ{¸Ê*"-/ÊEÊ*
Ê-9-/
Available in stock lengths or in cut-to-size kits which include extrusions,
caps and screws. Assembly components are also available separately.
Removable caps allow reveal to slide out from post for easy sign changing.
By selecting the appropriate post grooves and cap, reveal can be positioned
Extrusions
3/8" or 3/4" away from post or directly against post. SIC-1220 Post
Removable caps on post shown with
with installation of SIC-1200 Reveal
SIC-1200 Reveal
Catalog Cross and SIC-1260 Slide Body
below reveal space
Number Description Finish Length Section into SIC-1220 Rectangular Post
SIC-1235 3-1/4" Square Post Mill 24' - 0" SIC-1200 3 Position Reveal (1) Mill 24' - 0"
w/Radius Edges
SIC-5000 Radius Cap, 0" Tab SIC-1270 3-1/4" Bleed Body Mill 24' - 2"
SIC-5002 Radius Cap, 3/8" Tab Mill -
SIC-5004 Radius Cap, 3/4" Tab
SIC-5010 Rectangular Cap, 0" Tab SIC-1280 3-1/4", 1/4 Round Body Mill 24' - 2"
SIC-5012 Rectangular Cap, 3/8" Tab Mill -
SIC-5014 Rectangular Cap, 3/4" Tab 3-1/4" Slide Body
SIC-5015 Triangular Cap, 0" Tab SIC-1260 Top Body can be removed Mill 24' - 2"
for face change
SIC-5016 Triangular Cap, 3/8" Tab Mill -
SIC-5017 Triangular Cap, 3/4" Tab
SIC-5335 Corner Angle Mill -
SIC-5405 Square Cap, 0" Tab
SIC-5406 Square Cap, 3/8" Tab Mill -
SIC-5407 Square Cap, 3/4" Tab Reveal To Body Screw
SIC-5220 #10 x 3/4" Stainless Hex - -
SIC-5006 Rec. w/Radius Cap, 0" Tab Tapping Screw - Type A
SIC-5007 Rec. w/Radius Cap, 3/8" Tab Mill -
SIC-5008 Rec. w/Radius Cap, 3/4" Tab Slide Body Corner Screw
SIC-5240 #10 x 3/4" Stainless Phil. - -
SIC-5400 Tri. w/Radius Cap, 0" Tab Countersunk Thread Cutting Screw
SIC-5401 Tri. w/Radius Cap, 3/8" Tab Mill - NOTE: (1) Also used in Series 2.
SIC-5402 Tri. w/Radius Cap, 3/4" Tab
SIC-5410 Sq. w/Radius Cap, 0" Tab
SIC-5411 Sq. w/Radius Cap, 3/8" Tab Mill - Ordering Information
SIC-5412 Sq. w/Radius Cap, 3/4" Tab Kits contain posts, reveals, bodies, corner angles, caps and screws.
Cap Screw Please supply the following information when ordering pre-cut kits:
SIC-5040 #10 x 1/2" Stainless Phil. - -
Countersunk Screw - Type A Post length (include section below grade/foundation).
Post shape (square, round, etc.).
Body type (bleed or slide).
Body overall height (H) and width (W) of copy area.
Extrusions
SIC-1500 7" Radius Post Mill 24' - 0" SIC-1550 Reveal
Typical Series 7 architectural sign radius below reveal space
posts have been tack-welded
SIC-1510 7" Rectangular Post Mill 24' - 0"
below the copy board
SIC-1520 7" Rectangular Post Mill 24' - 0"
w/Radius Edges
-
,
-Ê£ÓÊUÊ /
, 9Ê1 /
Ê
/Ê-9-/
-
Available in stock lengths or in cut-to-size kits. Assembly components are also available separately.
Optional SIC-1671 6" radius ends can also be added.
Catalog Cross
Number Description Finish Length Section SIC-1612 Hinge Body
Extrusions
SIC-1690 Access Frame Mill 24' - 2" SIC-1624 SIC-1690 Access Frame and SIC-1632
Slide Retainer SIC-1694 Slide Cover Bleed Retainer
Hinge Screw
SIC-5280 #10 x 5/8" Stainless - - SIC-1671 6" Radius End
Allen Head shown mounted on SIC-1612 Hinge Body
with SIC-1632 Bleed Retainers
SIC-5220 Corner Angle Screw - -
#10 x 3/4" Stainless Hex
Countersunk Screw - Type A
Ordering Information
Kits contains body and retainer extrusions, corner angles and keys, screws and ballast brackets.
Please supply the following information when ordering pre-cut kits:
Body overall height (H) and width (W).
Cabinet type (single face or double face).
Type of retainers (if any).
Which side(s) will use access frame and slide cover.
MONOLITHIC EDGES
Can be used as structural edge elements for monument and architectural sign projects.
Catalog Cross
Number Description Finish Length Section
Extrusions
SIC-1890 3" Radius Edge, 90° Mill 24' - 0" SIC-1880 SIC-1890 SIC-3000
2" Radius Edge 3" Radius Edge Sharp Edge
SIC-1924 1 Part 12" Double Face Sign Cabinet Body Mill 24' - 5"
SIC-1929 2 Part 12" Double Face Sign Cabinet Body Mill 24' - 5"
SIC-1923 1 Part 9" Double Face Sign Cabinet Body Mill 24' - 5"
SIC-1928 2 Part 9" Double Face Sign Cabinet Body Mill 24' - 5"
SIC-1922 1 Part 8" Single Face Sign Cabinet Body Mill 24' - 5"
SIC-1927 2 Part 8" Single Face Sign Cabinet Body Mill 24' - 5"
Extrusions
SIC-1980 1 Piece Transformer Raceway Mill 24' - 2"
Catalog
Number Description/Application Finish Length Illustrations
Extrusions
SIC-5971 1 Part 2 Part 9" Body or S/F Body Ballast Pan Mill -
4-5/8" x 24" x .080
SIC-5088 1 Part 2 Part 9" Body or S/F Body Raceway Cover Mill -
Electrical
7xn/
*Ê £ÓäÊ }
Ê °näÊ äÊ äcÊ Ê Ê £äÊÊ {Ó°ä
xÓ/
*Ê Ó{äÊ }
Ê °{äÊ äÊ ³xäcÊ Ê Ê £äÊ Î{°x
{{Î-/
* ÓÇÇÊ }
Ê °ÎÎÊ nÇÊ ³xäcÊ Ê £äÊ Î{°Î
{ä/£ÓÉ,-Ê xäÓ/
*Ê(1) £ÓäÊ }
Ê °nxÊ nÊ ³xäcÊÊ ÊÊ ÊÊ ÈÊ Î°ä
ÊÊ}®Ê ÈÇn/
*Ê(1) ÓÇÇÊ }
Ê °ÎÇÊ £ääÊ ³xäcÊÊ ÊÊ ÊÊ ÈÊ {ä°Ó
(1)
,iÛiÀÃi`ÊÌiÃÊ`V>ÌiÊ7>ÌÌÊ,i`ÕViÀÊL>>ÃÌÃÊÊ "/
\ Ê,>«`ÊÃÌ>ÀÌÊ`}ÊL>>ÃÌÊÌÊLiÊÕÃi`ÊÊVÕVÌÊÜÌ
Ê«À«iÀÊVÌÀÊ`iÛVi°
"iÊ>«
Ê £{/£ÓÊÀÊ£x/nÊÀÊ x{È /
*Ê £ÓäÊ ÜÊ °ÈäÊ ÓÈÊ ³xäcÊ Ê ÓäÊ În°ä
Ê £x/£ÓÊÀÊÓä/£ÓÊ xÈx/
*Ê £ÓäÊ }
Ê °ÓnÊ ÎÓÊ ³xäcÊ Ê £äÊ Î£°ä
xÈÓ/
*Ê ÓÇÇÊ }
Ê °£ÓÊ ÎÓÊ ³xäcÊ Ê £äÊ Î£°ä
/ÜÊ>«Ã
Ê £{/£ÓÊÀÊ£x/nÊÀÊ {{Ç
,/
*ÊÊ £ÓäÊ ÜÊ °ÈÓÊ {ÓÊ ³xäcÊ Ê £äÊ Ón°ä
Ê £x/£ÓÊÀÊÓä/£ÓÊ xÈ{/
*ÊÊ £ÓäÊ }
Ê °{nÊ xnÊ ³xäcÊ Ê £äÊ Î£°ä
xx{/
*Ê ÓÇÇÊ }
Ê °ÓäÊ xnÊ ³xäcÊ Ê £äÊ Îx°ä
Ê £x/nÊÀÊ£x/£ÓÊÀÊ {{Ç,/
*Ê £ÓäÊ ÜÊ °xxÊ {ÎÊ ³xäcÊ Ê ÓäÊ {°ä
F20T12
"iÊ>«
Ê {/xÊ x{nÓ (1) £ÓäÊ ÜÊ °£ÎÊ ³xäcÊ Ê {äÊ Ón°ä
(1)
Ê È/xÊÀÊn/xÊ x{Ó £ÓäÊ ÜÊ °£ÈÊ ³xäcÊ Ê {äÊ Ón°ä
(1)
Ê £{]Ê£x]ÊÓä/£ÓÊÀÊ£x/nÊ ÓääÓ £ÓäÊ ÜÊ °ÎxÊ ³xäcÊ Ê {äÊ ÓÈ°ä
(1)
Ê Óx/£ÓÊ Î{äÓ £ÓäÊ ÜÊ °{äÊ ³xäcÊ Ê {äÊ Îä°ä
Ê Îä/nÊÀÊ ÓäÓ /
*Ê £ÓäÊ ÜÊ °ÈÇÊ ³xäcÊ Ê ÓäÊ În°ä
F40T12 ÊÊÊÊÓäÓ- /
* (2) £ÓäÊ ÜÊ °ÈÇÊ ³xäcÊ Ê ÓäÊ În°ä
/ÜÊ>«Ã
F40T12 Óäx/
*Ê £ÓäÊ }
Ê °nxÊ ³xäcÊ Ê £äÊ În°ä
NOTE: (1) (2)
ÀiÊEÊVÊL>>ÃÌðÊÊÊ 7Ì
ÊLÕÌÊÃÌ>ÀÌiÀ°
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
C-2
/
ÊUÊ1 6
,-Ê-
Ê8/1,
Ê -/-
ÈäâÊUÊ
iVÌÀ>}iÌVÊUÊ}
Ê*ÜiÀÊ>VÌÀ
Lamp Catalog Line Line Current Input Watts Min. Start Reduced Wattage CBM ty. Weight/Carton
Type Number olts Amps. ANSI Temperature Lamps Certified Per Carton (Lbs.)
"iÊ>«ÊUÊ{Óx
Ê Ó{/£ÓÊÀÊ xÎ/
*Ê £ÓäÊ °ÈäÊ ÈäÊ äcÊÊ Ê Ê £äÊ {È°È
Ê ÎÈ/£ÓÊÀÊ xΣ/
*ÊÊ ÓÇÇÊ °Ó{Ê ÈäÊ äcÊÊ Ê Ê £äÊ {x°
Ê {Ó/£ÓÊÀÊ
Ê {n/£ÓÊ
Ê Èä/£ÓÊÀÊ nÇx/
*Ê £ÓäÊ °xÓÊ ÈäÊ äcÊÊ ÊÊ ÊÊ £äÊ ÎÇ°ä
F64T12
ÇÓ/£ÓÊÀÊ nÓÓ ,/
*Ê £ÓäÊ °nxÊ £ääÊ äcÊÊ ÈÊ {È°x
n{/£ÓÊÀÊ nÓn ,/
*Ê ÓÇÇÊ °ÎÊ £ääÊ äcÊÊ ÈÊÊ {È°ä
È/£ÓÊ
/ÜÊ>«ÃÊUÊ{Óx
Ó{/£ÓÊÀÊ Ó£Î/
*Ê £ÓäÊ °näÊ xÊ ³xäcÊÊ Ê ÈÊ Îx°ä
Electrical
ÎÈ/£ÓÊÀÊ Ó£Ó/
*Ê £ÓäÊ °nÊ £ä{ÊÊ äcÊ Ê Ê {Ê x£°ä
{Ó/£ÓÊÀÊ xÎÓ ,/
*Ê ÓÇÇÊ °ÎxÊ ÇÊ ³ÎÓcÊ Ê ÈÊ {È°x
{n/£ÓÊ
Èä/£ÓÊÀÊ nn£ ,/
*Ê £ÓäÊ £°äxÊ ££nÊ äcÊ Ê Ê ÈÊ {Ó°ä
F64T12
ÇÓ/£ÓÊÀ näÈ-/
* £ÓäÊ £°äxÊ £ÓÓÊ ³xäcÊ Ê ÈÊ {n°Ó
n{/£ÓÊÀÊ nän ,/
*Ê ÓÓäÊ °ÇxÊ £ÎÓÊ äcÊ Ê ÈÊ {n°ä
È/£ÓÊ nÓÇ-/
* ÓÇÇÊ °{ÈÊ £ÓÓÊ ³xäcÊ Ê ÈÊ {n°n
"iÊ>«ÊUÊÓää
F42T6 n{Î/
*Ê £ÓäÊ °ÎÓÊ ÎÇÊ äcÊÊ ÊÊ ÊÊ £äÊ {Ó°x
ÊÊÈ{/ÈÊÀÊ n££/
*Ê £ÓäÊ °xäÊ xÓÊ äcÊÊ ÊÊ ÊÊ £äÊ {{°£
Ê ÇÓ/nÊ nä£/
*Ê £ÓäÊ °xxÊ xxÊ äcÊÊ ÊÊ ÊÊ £äÊ Î°ä
Ê È/nÊ nä£/
*Ê £ÓäÊ °ÈäÊ ÈÇÊ äcÊÊ ÊÊ ÊÊ £äÊ {£°ä
/ÜÊ>«ÃÊUÊÓää
F42T6 nǣ-/
*Ê £ÓäÊ °ÈxÊ ÇÓÊ äcÊÊ ÊÊ ÊÊ ÈÊ {{°ä
Ê È{/ÈÊÀÊ nÓx ,/
*Ê £ÓäÊ °äÊ nÊ ³xäcÊÊ ÊÊ ÊÊ ÈÊ {{°ä
Ê ÇÓ/nÊ n£ä/
*Ê £ÓäÊ °xÊ £äxÊ äcÊÊ ÊÊ ÊÊ {Ê x£°ä
ÊÊÈ/nÊ nÓx ,/
*Ê £ÓäÊ £°ääÊ £ÓxÊ ³xäcÊÊ ÊÊ ÊÊ ÈÊ {x°ä
,iÛiÀÃi`ÊÌiÃÊ`V>ÌiÊ7>ÌÌÊ,i`ÕViÀÊL>>ÃÌÃ
"iÊ>«
Ê {nÊ {/
*Ê £ÓäÊ £°ÓäÊ £ÎnÊ ÓäcÊÊ Ê Ê £äÊ xÎ
(1)
Ê ÇÓÊÌÊ x£-/
* £ÓäÊ £°näÊ £näÊ ÓäcÊ Ê Ê ÈÊ x
Ê ÈÊ x£-/
* (1)Ê £ÓäÊ Ó°ääÊ ÓÎxÊ ÓäcÊ ÊÊ ÊÊ ÈÊ xn
/ÜÊ>«Ã
{nÊÌÊÇÓÊ Èä6/
*Ê £ÓäÊ Ó°ÈäÊ ÎääÊ ÓäcÊ 4 64
Îä/
* (1) £ÓäÊ Î°ÓäÊ Î{äÊ ÓäcÊ Ê Ê {Ê ÈÎ
Ê ÇÓÊÌÊÈÊ ÎÈ8/
*Ê Ó{äÊ £°äÊ ÎÈäÊ ÓäcÊ Ê Ê ÎÊ ÈÎ
ÎÇ/
* (1) ÓÇÇÊ £°ÓxÊ Î{xÊ ÓäcÊ Ê Ê {Ê xn
/
ÀiiÊ>«Ã
{nÊÌÊÈÊ Î/
*Ê £ÓäÊ {°ääÊ xÎäÊ ÓäcÊ Ê ÎÊ ÈÎ
Ê ÇÓÊÌÊÈÊ ÎÎ/
*Ê £ÓäÊ {°näÊ ÇxäÊ ÓäcÊ Ê Ê ÎÊ ÈÎ
NOTE: (1)
>ÌÊLiÊÕÃi`ÊÜÌ
Ê/£äÊ>«Ã°
INTERSTATE ELECTRIC CO., INC.
9ATES !VE #OMMERCE #! s 0ROCYON ,AS 6EGAS .6 s 'OODYEAR 2D "ENICIA #!
C-3
/
ÊUÊ1 6
,-Ê"Ê8/1,
Ê -/-
ÀÊ
}
ÊÕÌ«ÕÌÊnääÊ>«Ã°
ÈäâÊUÊ
iVÌÀ>}iÌVÊUÊ}
Ê*ÜiÀÊ>VÌÀ
Lamp Catalog Line Line Current Input Watts Min. Start Reduced Wattage CBM ty. Weight/Carton
Type Number olts Amps. ANSI Temperature Lamps Certified Per Carton (Lbs.)
"iÊ>«
Ê Ó{/£ÓÉ"ÊÀÊ {n/
*Ê £ÓäÊ °näÊ £Ê ÓäcÊ Ê Ê ÈÊ {È°ä
Ê ÎÈ/£ÓÉ"ÊÀÊ {n£/
*Ê(2) £ÓäÊ °nÇÊ nxÊ ÓäcÊÊ Ê Ê {Ê {x°ä
Ê {Ó/£ÓÉ"ÊÀÊ {ä8/
*Ê(3) £ÓäÊÊ Ê°nÈÊ xÊ ÓäcÊÊ Ê Ê {Ê {ä°äÊ
Ê {n/£ÓÉ"Ê ÈÓn/
*Ê(4) ÓÇÇÊÊ °ÎxÊ xÊÊ ÓäcÊ Ê Ê ÈÊÊ {Ç°äÊ
Ê Èä/£ÓÉ"ÊÀÊ {n£/
*Ê £ÓäÊ £°äxÊ ££äÊ ÓäcÊÊ ÊÊ ÊÊ {Ê {x°ä
Ê È{/£ÓÉ"Ê {ä8/
*Ê(3)Ê £ÓäÊ £°ääÊÊ ££äÊ ÓäcÊ ÊÊ ÊÊ {Ê {ä°äÊ
ÇÓ/£ÓÉ"ÊÀÊ {nÎ/
*Ê £ÓäÊ £°ÓäÊ £ÎxÊ ³xäcÊÊ ÈÊ {°ä
Ê n{/£ÓÉ"ÊÀÊ {n£/
*Ê £ÓäÊ £°ÓäÊ £{äÊ ÓäcÊ {ÊÊ {x°ä
È/£ÓÉ"Ê {ä8/
*Ê(3) £ÓäÊÊ £°ÓäÊÊ £ÎxÊÊ ÓäcÊÊ {ÊÊ {ä°äÊ
{nÓ/
*Ê ÓÇÇÊ °xäÊ £ÎxÊ ³xäcÊ ÈÊÊ {°x
{£8/
*Ê(5) ÓÇÇÊÊ °xxÊÊ £ÎxÊ ÓäcÊÊ {ÊÊ {Ó°äÊ
Electrical
/ÜÊ>«Ã
Ó{/£ÓÉ"ÊÀÊ ÈÓä/
*Ê £ÓäÊ £°ÓxÊ £{xÊ ³xäcÊÊ Ê ÈÊ {Ç°ä
ÎÈ/£ÓÉ"ÊÀÊ {ä8/
*Ê(3) £ÓäÊ £°{äÊ £{xÊ ÓäcÊ Ê Ê {Ê {ä°ä
Ê {Ó/£ÓÉ"ÊÀÊ ÈÓÇ/
*Ê ÓÇÇÊ °xÎÊ £{xÊ ³xäcÊÊ Ê Ê ÈÊ {n°ä
Ê {n/£ÓÉ"Ê {£8/
*Ê(5) ÓÇÇÊ °È£Ê £{xÊ ÓäcÊ Ê {Ê {Ó°ä
ÊÊÊÊ ÈÓn/
*Ê(4) ÓÇÇÊÊ °{ÎÊÊ £ÓäÊÊ ÓäcÊÊ Ê ÈÊÊ {Ç°äÊ
Èä/£ÓÉ"ÊÀÊ {ä8/
*Ê(3) £ÓäÊ £°ÈäÊ £näÊ ÓäcÊ Ê Ê {Ê {ä°ä
Ê È{/£ÓÉ"Ê {£8/
*Ê(5)Ê ÓÇÇÊÊ °ÇäÊÊ £näÊ ÓäcÊÊ Ê ÊÊ {Ê {Ó°äÊ
Ê ÇÓ/£ÓÉ"ÊÀÊ {nä8/
*Ê(1)Ê £ÓäÊ Ó°£äÊ ÓxÇÊ ÓäcÊ Ê {ÊÊ În°
Ê n{/£ÓÉ"ÊÀÊ {nä-/
*Ê(1)Ê £ÓäÊ Ó°£äÊ ÓÎÇÊ ÓäcÊ Ê {Ê {n°n
Ê È/£ÓÉ"Ê {nÇ8/
*Ê(1)Ê ÓÇÇÊ °nÇÊ ÓxÇÊ ÓäcÊ ÊÊ {Ê {x°ä
{nÇ-/
*Ê(1)Ê ÓÇÇÊ °nÇÊ ÓÎÇÊ ÓäcÊ ÊÊ {Ê {°È
{£8/
*Ê(6)Ê ÓÇÇÊ °ÇäÊ £äÊ ÓäcÊ ÊÊ ÊÊ {Ê {Ó°ä
,iÛiÀÃi`ÊÌiÃÊ`V>ÌiÊ7>ÌÌÊ,i`ÕViÀÊL>>ÃÌð
NOTE: (1)1Ãi`ÊÊ>ÞÊÌÜÊ>«ÊVL>ÌÊvÊÃÌi`Ê>«Ã°
(2)
>ÌÊLiÊÕÃi`ÊÜÌ
Ê£ÉÓ{]ÊÎÈÊÀÊ{Ó/£Ó"Ê>«°
(3)
1Ãi`ÊÊ>ÞÊiÊÀÊÌÜÊ>«ÊVL>ÌÊÜÌ
Ê>ÊÌÌ>Ê>ÝÕÊ>«Êi}Ì
ÊvÊ£ÓÊviiÌÊÀÊ>ÊÕÊvÊ{ÊviiÌ°ÊÊ
>ÌÊLiÊÕÃi`ÊÜÌ
Ê£ÉÓ{]ÊÎÈÊÀÊ{Ó/£Ó"Ê>«°
(4)
1Ãi`ÊÊ>ÞÊiÊÀÊÌÜÊ>«ÊVL>ÌÊÜÌ
Ê>ÊÌÌ>Ê>ÝÕÊ>«Êi}Ì
ÊvÊÈÊviiÌÊÀÊ>ÊÕÊvÊÎÊviiÌ°ÊÊ
>ÌÊLiÊÕÃi`ÊÜÌ
Ê£ÉÓ{]Ê{ÓÊÀÊ{n/£Ó"Ê>«°
(5)
1Ãi`ÊÊ>ÞÊÌÜÊ>«ÊVL>ÌÊÜÌ
Ê>ÊÌÌ>Ê>ÝÕÊ>«Êi}Ì
ÊvÊ£ÓÊviiÌÊÀÊ>ÊÕÊvÊÈÊviiÌ°ÊÊ
>ÌÊLiÊÕÃi`ÊÜÌ
ÊÓÉÓ{/£Ó"Ê>«Ã°
(6)
>ÌÊLiÊÕÃi`ÊÜÌ
ÊÓÉn{ÊÀÊÈ/£Ó"Ê>«Ã°
"À`iÀ}ÊvÀ>Ì
All ballasts available: For encased ballast add "«iÊ
ÀiÊEÊ
ÊÊ >>ÃÌ
V>Ãi`Ê >>ÃÌ
suffix "P", open core coil without mounting feet With Mounting Feet
"F1P", open core coil with mounting feet "F2P".
"-,Ê-96 Ê
/,"
Ê -/-
"VÌÀÊ/nÊ-ÞÃÌiÃ
À>Ê}
ÌÊ"ÕÌ«ÕÌ\Ê 1«ÊÌÊ{ä¯ÊiiÀ}ÞÊÃ>Û}ÃÊÛiÀÊ{ä/£Ó]Ê>}iÌVÊÃÞÃÌiÃÊÜÌ
ÊV«>À>LiÊ}
ÌÊÕÌ«ÕÌ°
}
Ê}
ÌÊ"ÕÌ«ÕÌ\Ê 1«ÊÌÊÎίÊÀiÊ}
ÌÊÕÌ«ÕÌÊÌ
>ÊÃÌ>`>À`ÊiiVÌÀVÊ/nÊÃÞÃÌiÃÊvÀÊ
}
Ê}
ÌÊÕÌ«ÕÌÊ>««V>ÌðÊ
ÜÊ*ÜiÀ\Ê 1«ÊÌÊ£x¯ÊiiÀ}ÞÊÃ>Û}ÃÊÛiÀÊÃÌ>`>À`ÊiiVÌÀVÊ/nÊÃÞÃÌiÃ]ÊÕ«ÊÌÊÎä¯ÊÛiÀÊÎ{/£ÓÊ>}iÌVÊÃÞÃÌið
}
ÌÊÌÊ/n\Ê 1«ÊÌÊÎä¯ÊiiÀ}ÞÊÃ>Û}ÃÊÛiÀÊÈ/£ÓÊ>}iÌVÊÃÞÃÌið
-iÊ/£ÓÊ>`Ê/£ÓÉ"Ê-ÞÃÌiÃ
-ÞÃÌiÊÈÊ>`ÊÈÉ"\Ê 1«ÊÌÊ£x¯ÊiiÀ}ÞÊÃ>Û}ÃÊÛiÀÊÃÌ>`>À`Ê>}iÌVÊÃÞÃÌið
«>VÌÊÕÀiÃViÌÊ//xÊ-ÞÃÌiÃ
//xÊÃÌ>ÌÊ-Ì>ÀÌ\Ê Ê Ê "ÛiÀÊÎä¯ÊÀiÊÕiÊÕÌ«ÕÌÊÌ
>ÊÎ{7Ê/£ÓÊÃÞÃÌiðÊÊ
Ì>ÃÊ+1
-
-
Êi`ÊvÊ>«ÊviÊÃiÃ}ÊÌiV
}Þ°
//xÊ*À}À>i`Ê,>«`Ê-Ì>ÀÌ\Ê "ÛiÀÊÓä¯ÊÀiÊÕiÊÕÌ«ÕÌÊÌ
>ÊÎ{7Ê/£ÓÊÃÞÃÌiðÊÊ
Ì>ÃÊ+1
-
-
Êi`ÊvÊ>«ÊviÊÃiÃ}ÊÌiV
}Þ°
Catalog rdering Number Lamp Line Ballast ty. Weight/Carton
Number Abbreviation of Lamps (1) Type olts Factor Per Carton (Lbs.)
À>Ê}
ÌÊ"ÕÌ«ÕÌ
49911Ê +/£8ÎÓÉ£Óä--
£Ê ÊÊ £ÓäÊ °äÊ £äÊ £È
49912Ê +/£8ÎÓÉÓÇÇ--
£Ê "ÎÓ]Ê"£Ç]Ê"Óx]Ê"{äÊ ÓÇÇÊ °äÊ £äÊ £È
49913Ê +/Ó8ÎÓÉ£Óä--
ÓÊ -ÌÀ>}
ÌÊ/nÊ>«ÃÊ £ÓäÊ °äÊ £äÊ £ÈÊ
49914Ê +/Ó8ÎÓÉÓÇÇ--
Ê Ó ÀÊ ÓÇÇÊ °äÊ £äÊ £È
49515Ê +/Î8ÎÓÉ£Óä- ÎÊ "£È]Ê "Ó{]Ê "Σ]Ê äÎÓÊ £ÓäÊ °äÊ £äÊ ÓnÊ
49516Ê +/Î8ÎÓÉÓÇÇ-Ê Î ¸1¸Ê-
>«i`Ê/nÊ>«ÃÊ ÓÇÇÊ °äÊ £äÊ Ón
49517Ê +/{8ÎÓÉ£Óä-Ê { ÊÊ £ÓäÊ °äÊ £äÊ Ón
49518Ê +/{8ÎÓÉÓÇÇ-Ê { ÃÌ>ÌÊ-Ì>ÀÌÊÊ ÓÇÇÊ °äÊ £äÊ Ón
}
Ê}
ÌÊ"ÕÌ«ÕÌÊ Ê Ê äÎÓ
49523Ê +/Ó8ÎÓÉ£Óä*1-Ê Ó -ÌÀ>}
ÌÊ/nÊ>«ÃÊ £ÓäÊ £°ÓäÊ £äÊ Ón
49524Ê +/Ó8ÎÓÉÓÇÇ*1-Ê Ó ÀÊ ÓÇÇÊ £°ÓäÊ £äÊ Ón
49525Ê +/Î8ÎÓÉ£Óä*1-Ê Î "Σ]Ê "ÎÓÊ £ÓäÊ £°£nÊ £äÊ ÓnÊ
49526Ê +/Î8ÎÓÉÓÇÇ*1-Ê Î ¸1¸Ê-
>«i`Ê/nÊ>«ÃÊ ÓÇÇÊ £°£nÊ £äÊ Ón
NOTE: (1)
Ê >>ÃÌÃÊV>ÊLiÊ`ÜÜÀi`ÊiÊ>«ÊLÞÊV>««}Ê>ÞÊÕÕÃi`ÊLÕiÊi>`°
Electrical
49882Ê +/Ó8ÈÉÓÇÇ-Ê Ó /£ÓÊ>«Ã]ÊÃÌ>ÌÊ-Ì>ÀÌÊ ÓÇÇÊ °nnÊ £äÊ Îx
-iÊ/£ÓÊ"
49883Ê +/Ó8ÈÉ£Óä"Ê Ó È]Ê{n]ÊÈä]ÊÇÓ]n{Ê £ÓäÊ °nnÊ £äÊ Îx
49884Ê +/Ó8ÈÉÓÇÇ"Ê Ó /£ÓÊ"Ê>«Ã]Ê,>«`Ê-Ì>ÀÌÊ ÓÇÇÊ °nnÊ £äÊ Îx
«>VÌÊÕÀiÃViÌÊ//x
49641Ê +/£8{äÉ£ÓäÊ £ /{äÊÊ £ÓäÊ °ÈÊ £äÊ Ón
49642Ê +/£8{äÉÓÇÇÊ £ {ä7Ê/xÊ>«ÃÊ ÓÇÇÊ °ÈÊ £äÊ Ón
49643Ê +/Ó8{äÉ£ÓäÊ Ó +1
-
Ê £ÓäÊ °ÈÊ £äÊ Ón
49644Ê +/Ó8{äÉÓÇÇÊ Ó
`ÊvÊ>«ÊviÊ ÓÇÇÊ °ÈÊ £äÊ Ón
49645Ê +/Î8{äÉ£ÓäÊ Î -
ÕÌÊÜÊ
ÀVÕÌÀÞÊ £ÓäÊ °ÈÊ £äÊ Ón
49646Ê +/Î8{äÉÓÇÇÊ Î ÃÌ>ÌÊ-Ì>ÀÌÊ ÓÇÇÊ °ÈÊ £äÊ Ón
*iÌÀÊ/xÊ*ÀÃÌ>ÀÌ®
49681 +/£8ÓnÉ£Óä*- £Ê *Ón]Ê*Ó£]Ê*£{]Ê*ÎxÊ £ÓäÊ £°ääÊ ÓäÊ Óx
49682 +/£8ÓnÉÓÇÇ*- £Ê Ón7Ê/xÊ>«Ê ÓÇÇÊ £°ääÊ ÓäÊ Óx
49683 +/Ó8ÓnÉ£Óä*- ÓÊ //xÊ £ÓäÊ £°ääÊ ÓäÊ Óx
49684 +/Ó8ÓnÉÓÇÇ*- ÓÊ *À}À>i`Ê,>«`Ê-Ì>ÀÌÊ ÓÇÇÊ £°ääÊ ÓäÊ Óx
*iÌÀÊ/xÊ"Ê*ÀÃÌ>ÀÌ®
49651 +/£8x{É£Óä*" £Ê *x{/x"]Ê/xx]Ê*
xxÊ £ÓäÊ £°ääÊ ÓäÊ Óä
49652 +/£8x{ÉÓÇÇ*" £Ê x{7ÊÀÊxx7Ê/xÊ>«Ê ÓÇÇÊ £°ääÊ ÓäÊ Óä
49653 +/Ó8x{É£Óä*" ÓÊ /x"Ê £ÓäÊ £°ääÊ ÓäÊ Óä
49654 +/Ó8x{ÉÓÇÇ*" ÓÊ *À}À>i`Ê,>«`Ê-Ì>ÀÌÊ ÓÇÇÊ £°ääÊ ÓäÊ Óä
NOTE: (1)
Ê >>ÃÌÃÊV>ÊLiÊ`ÜÜÀi`ÊiÊ>«ÊLÞÊV>««}Ê>ÞÊÕÕÃi`ÊLÕiÊi>`°
³ÉÚÊ
/
Ê/\ ÜÊ>ÀVÊÃÌÀÌ\Ê iÃÃÊÌ
>ÊÓä¯Ê/ 6Ì>}iÊ,>}i\Ê £ä¯ÊvÊ,>Ìi`Ê«ÕÌÊ6Ì>}i
«ÕÌÊÀiµÕiVÞ\Ê xäÉÈäâ *ÜiÀÊ>VÌÀ\Ê Ài>ÌiÀÊÌ
>Êǯ -Õ`Ê,>Ì}\Ê
>ÃÃÊ
6
Ê8/1,
Ê -/-
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÊ>Ê>ÕÌ
Àâi`Ê`ÃÌÀLÕÌÀÊvÀÊ`Û>ViÊwÝÌÕÀiÊL>>ÃÌð
-iiVÌi`Ê`iÃÊÃÌVi`]ÊÌ
iÀÊ`iÃÊ>Û>>LiÊÕ«ÊÀiµÕiÃÌ°
Replacement Kit Line Max. Line Input Capacitor Specifications Separate Capacitor Separate Ignitor Weight
Catalog Number oltage Amps. Watts MFD AC Catalog No. Catalog No. (Lbs.)
"iÊxäÊ7>ÌÌÊ-ÈnÊ*-Ê>«
12310-95-5 £ÓäÊÀÊÊ £°Ó{Ê È{Ê xÊ ÎääÊ ääx£{ÈÈ *-£xäÎÊ x°ä
Ê -xä/
Îxää®Ê ÓänÊÀÊ °xÊ
Ó{äÊÀÊ °xäÊ Ê Ê
ÊÊ ÓÇÇÊ °{{
"iÊÇäÊ7>ÌÌÊ-ÈÓÊ*-Ê>«
12310-153-5 £ÓäÊÀÊ £°{äÊ {Ê ÇÊ ÎääÊ ääx£{£ä *-£xäÎÊ x°ä
Ê -Çä/
Îxää®Ê ÓänÊÀÊ °nÎÊ
Ó{äÊÀÊ °ÇÓÊ
ÓÇÇÊ °ÈÓÊ
"iÊ£ääÊ7>ÌÌÊ-x{Ê*-Ê>«
Ê £ÓÎΣä1xää (1) £ÓäÊ Ó°äÊ ££xÊ £äÊ ÎääÊ ääx£{£Î *-£xäÎÊ È°x
12310-90-5 £ÓäÊÀÊ Ó°ÓäÊ £ÓnÊ £äÊ ÎääÊ ääx£{£Î *-£xäÎÊ È°x
Ê -£ää/
Îxää®Ê ÓänÊÀÊ £°{äÊ
Ó{äÊÀÊ £°£äÊ
ÓÇÇÊ °xÊ
"iÊ£xäÊ7>ÌÌÊ-xxÊ*-Ê>«
12310-165-5 £ÓäÊÀÊ Î°ääÊ £nnÊ £{Ê ÎääÊ ääx£{£x *-£xäÎÊ n°ä
Ê -£xä/
Îxää®Ê ÓänÊÀÊ £°ÈxÊ
Ó{äÊÀÊ £°{xÊ
ÓÇÇÊ £°Óx
Ê £ÓΣä£Èä-xÊ {näÊ °ÇÓÊ £nnÊ £{Ê ÎääÊ ääx£{£x *-£xäÎÊ £ä°ä
"iÊÓxäÊ7>ÌÌÊ-xäÊ*-Ê>«
Ê £ÓÎäÓ-xÊ £ÓäÊÀÊ Ó°xäÊ ÓxÊ ÎxÊ ÎääÊ ääx£{Ó£ *-{ääÎÊ ££°x
Ê -Óxä/
{xää®Ê ÓänÊÀÊ £°{ÎÊ
Ó{äÊÀÊ £°ÓxÊ
ÓÇÇÊ £°£ä
Ê £ÓÎäÎÓ-xÊ {näÊ °ÈxÊ ÎääÊ ÎxÊ ÎääÊ ääx£{Ó£ *-{ääÎÊ ££°x
Ê -Óxä{n/
{xää®Ê
"iÊ{ääÊ7>ÌÌÊ-x£Ê*-Ê>«
Ê £ÓÎäÎ1xÊ £ÓäÊÀÊÊ Î°äÊ {ÈxÊ xÈÊ Ó{äÊ ääx£x{ *-{ääÎÊ £x°x
Ê -{ää/
{xää®Ê ÓänÊÀÊ Ó°ÓxÊ
Ó{äÊÀÊ £°xÊ
ÓÇÇÊ £°Çä
Ê £ÓÎäÎÎ-xÊ {näÊ £°ääÊ {ÈxÊ {nÊ ÎääÊ ääx£{ÓÓ *-{ääÎÊ £È°x
Ê -{ää{n/
xxää®Ê
"iÊ£äääÊ7>ÌÌÊ-xÓÊ*-Ê>«
Ê £ÓÎäÇ-xÊ £ÓäÊÀÊ °xÊ ££ääÊ ÓÈÊ xÓxÊ ääxÓÇÇÈ *-£äää{ Ê ÓÇ°x
Ê -£äää/
xxää®Ê ÓänÊÀÊ x°xÊ
Ó{äÊÀÊ {°nÊ
ÓÇÇÊ {°£
Ê £ÓÎäxÇ-xÊ {näÊ Ó°{Ê ££ääÊ ÓÈÊ xÓxÊ ääxÓÇÇÈ *-£äää{ Ê ÓÇ°x
Ê -£äää{n/
xxää®
NOTE: -ÕLÃÌÌÕÌiÊÃÕvwÝʸxää¸ÊÀʸx¸ÊÜÌ
Ê>ʸÇää¸ÊvÀÊ>ÊVÀiÊEÊVÊÌÊÜÌ
ÊwÝi`ÊÕÌ}ÊviiÌ°ÊÊÊÊÊÊÊÊÊÊÊ(1)7Ì
ÕÌÊÕÌ}ÊLÀ>ViÌð
INTERSTATE ELECTRIC CO., INC.
9ATES !VE #OMMERCE #! s 0ROCYON ,AS 6EGAS .6 s 'OODYEAR 2D "ENICIA #!
C-7
/
ÊUÊ1 6
,-ÊÊ
",
ÊEÊ
"Ê -/Ê,
*
/Ê/-
ÀÊiÌ>Ê>`iÊ>«Ã°ÊÊ
>Ê>ÃÊLiÊÕÃi`ÊÜÌ
ÊiÀVÕÀÞÊÛ>«ÀÊ>«ÃÊ>ÃÊ`V>Ìi`°
ÌÃÊVÌ>\Ê
ÀiÊEÊV]ÊV>«>VÌÀ]Ê}ÌÀÊ>ÃÊÀiµÕÀi`®Ê>`ÊÃiÌÊvÊ>`ÕÃÌ>LiÊÕÌ}ÊviiÌ°
>«>VÌÀÃÊ>`Ê}ÌÀÃÊ>Û>>LiÊÕ`iÀÊÃi«>À>ÌiÊV>Ì>}ÊÕLiÀð
ÈäâÊUÊÓäcÊ°Ê-Ì>ÀÌÊ/i«°ÊUÊ`Û`Õ>ÞÊ Ýi`
Replacement Kit Line Max. Line Input Capacitor Specifications Separate Capacitor Separate Ignitor Kit Weight
Catalog Number oltage Amps. Watts MFD AC Catalog No. Catalog No. (Lbs.)
"iÊÇäÊ7>ÌÌÊnxÊiÌ>Ê>`iÊ>«
11310-281-5 £ÓäÊÀÊÊ £°ÇäÊ xÊ nÊ ÎääÊ ääx£{££ ÇäÎ Ê {°Óx
ÓänÊÀÊ £°ä{Ê
Ó{äÊÀÊ °nÇÊ Ê Ê
ÊÊ ÓÇÇÊ °Çn
"iÊÇäÊ7>ÌÌÊnÊÀÊ"iÊÇxÊ7>ÌÌÊ£ä£ÊiÌ>Ê>`iÊ>«
11310-510-5 £ÓäÊÀÊ £°ÇäÊ xÊ nÊ ÎääÊ ääx£{££ £ääÎÊ {°Óx
Ê Çä/
Îxää®Ê ÓänÊÀÊ £°ä{Ê
Ó{äÊÀÊ °nÇÊ
ÓÇÇÊ °ÇnÊ
Electrical
"iÊ£ääÊ7>ÌÌÊäÊÀÊ"iÊ£ääÊ7>ÌÌÊÓÊiÌ>Ê>`iÊ>«
11310-90-5 £ÓäÊÀÊ Ó°ÎäÊ £ÎäÊ £äÊ ÎääÊ ääx£{£Î £ääÎÊ È°Óx
Ê £ää/
Îxää®Ê ÓänÊÀÊ £°ÎäÊ
Ó{äÊÀÊ £°£äÊ
ÓÇÇÊ °x
"iÊ£xäÊ7>ÌÌÊn£ÊiÌ>Ê>`iÊ>«
11310-177-5 £ÓäÊÀÊ Î°ÎÓÊ £nxÊ £ÈÊ ÎääÊ ääx£{n ÇäÎ Ê Ç°Óx
ÓänÊÀÊ £°ÎÊ
Ó{äÊÀÊ £°ÈÈÊ
ÓÇÇÊ £°{nÊ
"iÊ£ÇxÊ7>ÌÌÊxÇÊÀÊ"iÊ£ÇxÊ7>ÌÌÊ£äÊiÌ>Ê>`iÊÀÊÎÊiÀVÕÀÞÊ>«
Ê ££Î䣣,ÇääÊ(1) £ÓäÊ £°näÊ Ó£äÊ £äÊ {ääÊ ääx££n{ Ê ÌÊ,iµÕÀi` È°Çx
1130-31-5 {näÊ °x£Ê Ó£äÊ £äÊ {ääÊ ääx££n{ Ê ÌÊ,iµÕÀi` n°Óx
Ê £Çx{n/
Îxää®
Ê ££Îä£,xÊ £ÓäÊÀÊ £°näÊ Ó£äÊ £äÊ {ääÊ ääx££n{ Ê ÌÊ,iµÕÀi` È°Çx
Ê £Çx/
Îxää®Ê ÓänÊÀÊ £°£äÊ
Ó{äÊÀÊ °äÊ
ÓÇÇÊ °ÇnÊ
"iÊÓxäÊ7>ÌÌÊxnÊÀÊ"iÊÓxäÊ7>ÌÌÊ£äÎÊiÌ>Ê>`iÊÀÊÎÇÊiÀVÕÀÞÊ>«
1130-92-5 £ÓäÊÀÊÊ Ó°ÈäÊ Ó{Ê £xÊ {ääÊ ääx££nx Ê ÌÊ,iµÕÀi`
Ê Óxä/
Îxää®Ê ÓänÊÀÊ £°xnÊ
Ó{äÊÀÊ £°ÎäÊ
ÓÇÇÊ £°£ÓÊ
Ê ££ÎäÎÓ,xÊ {näÊ °ÇäÊ ÓÎÊ £xÊ {ääÊ ääx££nx Ê ÌÊ,iµÕÀi` °Çx
Ê Óxä{n/
{xää®Ê
"iÊ{ääÊ7>ÌÌÊxÊiÌ>Ê>`iÊÀÊ"iÊÎÎÊiÀVÕÀÞÊ>«
Ê ££ÎäÎÎ,xÊ {näÊ £°ääÊ {ÈxÊ Ó{Ê {ääÊ ääxÓÈÈ{ Ê ÌÊ,iµÕÀi` £Ó°Çx
Ê {ää{n/
{xää®Ê
Ê ££ÎäÎ,xÊ £ÓäÊÀÊ {°ääÊ {xxÊ Ó{Ê {ääÊ ääxÓÈÈ{ Ê ÌÊ,iµÕÀi` £Ó°Çx
Ê {ää/
{xää®Ê ÓänÊÀÊ Ó°ÎäÊ
Ó{äÊÀÊ Ó°ääÊ
ÓÇÇÊ £°ÇäÊ
"iÊ£äääÊ7>ÌÌÊ{ÇÊiÌ>Ê>`iÊÀÊ"iÊÎÈÊiÀVÕÀÞÊ>«
1130-57-5 {näÊ Ó°ÎäÊ £änäÊ Ó{Ê {näÊ ääxÓÇÇ Ê ÌÊ,iµÕÀi` 24
Ê £äää{n/
xxää®Ê
1130-97-5 £ÓäÊÀÊ °ÓäÊ £änäÊ Ó{Ê {näÊ ääxÓÇÇ Ê ÌÊ,iµÕÀi` 24
Ê £äää/
xxää®Ê ÓänÊÀÊ x°ÎäÊ
Ó{äÊÀÊ {°ÈäÊ
ÓÇÇÊ {°ääÊ
"iÊ£xääÊ7>ÌÌÊ{nÊiÌ>Ê>`iÊ>«
Ê ££ÎäÈ,xÊ {näÊ Î°xäÊ £È£äÊ ÎÓÊ xÓxÊ ääx£{Ç{ Ê ÌÊ,iµÕÀi` Ó°x
Ê £xää{n/
xxää®
Ê ££Îä,xÊ £ÓäÊÀÊ £{°ääÊ £È£äÊ ÎÓÊ xÓxÊ ääx£{Ç{ Ê ÌÊ,iµÕÀi` Ó°x
Ê £xää/
xxää®Ê ÓänÊÀÊ n°ääÊ
Ó{äÊÀÊ Ç°ääÊ
ÓÇÇÊ È°ää
NOTE: (1)
µÕ««i`ÊÜÌ
ÊwÝi`ÊÕÌ}ÊviiÌ°
Replacement Kit Line Max. Line Input Capacitor Specifications Separate Capacitor Kit Weight
Catalog Number oltage Amps. Watts MFD AC Catalog No. (Lbs.)
"iÊ£ääÊ7>ÌÌÊÎnÊiÀVÕÀÞÊ>«
Ê £äÎää,xÊ £ÓäÊÀÊÊ £°äxÊ £ÓxÊ £äÊ ÎääÊ ääx£{£Î 4
ÓänÊÀÊ °ÈäÊ
Ó{äÊÀÊ °xÓÊ Ê Ê
Ê Ê ÓÇÇÊ °{x
"iÊ£ÇxÊ7>ÌÌÊÎÊiÀVÕÀÞÊ>«
1030-91-5 £ÓäÊÀÊ £°näÊ ÓäxÊ £Ç°xÊ ÎääÊ ääx£{£Ç Ê x°Óx
ÓänÊÀÊ £°£äÊ
Electrical
Ó{äÊÀÊ °äÊ
ÓÇÇÊ °ÇnÊ
"iÊÓxäÊ7>ÌÌÊÎÇÊiÀVÕÀÞÊ>«
1030-92-5 £ÓäÊÀÊ Ó°xäÊ ÓnxÊ ÓÓ°xÊ ÎääÊ ääx£{£ Ê È°Çx
Ê Óxä/
Îxää®Ê ÓänÊÀÊ £°xäÊ
Ó{äÊÀÊ £°ÓxÊ
ÓÇÇÊ £°£ä
"iÊ{ääÊ7>ÌÌÊÎÎÊiÀVÕÀÞÊ>«
1030-33-5 {näÊ °ÇÊ {x{Ê ÎxÊ ÎääÊ ääx£{Ó£ Ê °ÈÎ
Ê {ää{n/
xxää®Ê
1030-93-5 £ÓäÊÀÊ Î°näÊ {x{Ê ÎxÊ ÎääÊ ääx£{Ó£ Ê °ÈÎ
ÓänÊÀÊ Ó°ÓäÊ
Ó{äÊÀÊ £°äÊ
ÓÇÇÊ £°ÈxÊ
"iÊ£äääÊ7>ÌÌÊÎÈÊiÀVÕÀÞÊ>«
1030-57-5 {näÊ Ó°ÎäÊ £äÇxÊ Ó{Ê {näÊ ääxÓÇÇ Ê £°x
Ê £äää{n/
xxää®
1030-97-5 £ÓäÊÀÊ °ÓäÊ £äÇxÊ Ó{Ê {näÊ ääxÓÇÇ Ê £°x
ÓänÊÀÊ x°ÎäÊ
Ó{äÊÀÊ {°ÈäÊ
ÓÇÇÊ {°ääÊ
/ÜÊ{ääÊ7>ÌÌÊÎÎÊiÀVÕÀÞÊ>«Ã
2030-13-5 £ÓäÊ Ç°xäÊ nnäÊ £ÈÊ xÓxÊ ääx£nÎ Ê £°x
2030-17-5 ÓÇÇÊ Î°ÓxÊ nnäÊ £ÈÊ xÓxÊ ääx£nÎ Ê £°x
2030-33-5 {näÊ £°xÊ nnäÊ £ÈÊ xÓxÊ ääx£nÎ Ê £°x
6
Ê /",-
Û>>LiÊ >ÃÊ `ÀiVÌÊ Ài«>ViiÌÃÊ vÀÊ ÃiÀÛViÊ ÜÀ°Ê Ê -
Õ`Ê ÌÊ LiÊ ÕÃi`Ê ÜÌ
Ê
>}iÌiÉ1ÛiÀÃ>ÊL>>ÃÌð
Catalog Lamp Lamp
Number Type Watts
"i]Ê/Ü]Ê/
Àii]ÊÕÀ]ÊÛiÊÀÊ-ÝÊ>«Ã
Ê xx£{Ê *-Ê ÎxÊÌÊ£xäÊ
Ê xä£{Ê *-Ê ÓääÊÌÊ{ää
Ê xÎÎ{Ê *-Ê Îxä
Ê xÇ£xÊ *-Ê £]äää
Electrical
xäÊ ££Ó£äÓÎÈ
/
Ê £ÓäÊÀÊ °È{Ê ÇäÊ ÓäcÊ {Ê {{
Ê ££äÊ Ê ÓÇÇÊ °Èx
70 ££Ó£äxäÈ
/
Ê £ÓäÊÀÊ °ÇnÊ äÊ ÓäcÊ {Ê {{
Ê nÊ Ê ÓÇÇÊ °ä
100 ££Ó£äÓÎ
/
Ê £ÓäÊÀÊ Ó°ÓäÊ £ÓxÊ ÓäcÊ {Ê {{
Ê äÊ Ê ÓÇÇÊ £°ää
£ÇxÊ £££äÓ{x-
/
Ê £ÓäÊÀÊ £°ÇxÊ ÓäxÊ ÓäcÊ {Ê xÈ
Ê xÇÊÀÊÎÊ Ê ÓÇÇÊ °Çx
ÓxäÊ £££äÓ{È
/
Ê £ÓäÊÀÊ Ó°xÊ ÓxÊ ÓäcÊ {Ê Çä
Ê xnÊÀÊÎÇÊ Ê ÓÇÇÊ £°£
400 £££äÓ{Ç-
/
Ê £ÓäÊÀÊ Î°Ê {ÈäÊ ÓäcÊ ÎÊ È
Ê xÊÀÊÎÎÊ Ê ÓÇÇÊ £°Ç
400 ££££Ó{Ç-
/
Ê £ÓäÊÀÊ Î°Ê {ÈäÊ ÓäcÊ {Ê xÈ
Ê xÊÀÊÎÎÊ Ê ÓÇÇÊ £°Ç
"iÊ>«ÊUÊiÀVÕÀÞ
xäÊ £ä£äÓÎÈ,
/
Ê £ÓäÊÀÊ °ÈäÊ ÈnÊ ÓäcÊ {Ê ÎÈ
Ê {ÈÊ Ê ÓÇÇÊ °Ó{
ÇxÊ £ä£äÓÎn
/
Ê £ÓäÊÀÊ °nÓÊ äÊ ÓäcÊ {Ê În
Ê {ÎÊ Ê ÓÇÇÊ °Îx
100 £ä£äÓÎ,
/
Ê £ÓäÊÀÊ £°äxÊ £ÓäÊ ÓäcÊ {Ê Î
Ê ÎnÊ Ê ÓÇÇÊ °{x
£ÇxÊ £ä£äÓ{x
/
Ê £ÓäÊÀÊ £°ÇäÊ £nÊ ÓäcÊ {Ê {x
Ê ÎÊ Ê ÓÇÇÊ °Çä
ÓxäÊ £ä£äÓ{È
/
Ê £ÓäÊÀÊ Ó°{äÊ ÓnxÊ ÓäcÊ {Ê xn
Ê ÎÇÊ Ê ÓÇÇÊ £°äx
400 £ä£äÓ{Ç-
/
Ê £ÓäÊÀÊ Î°näÊ {xäÊ ÓäcÊ {Ê Ç{
Ê ÎÎÊ Ê ÓÇÇÊ £°Èx
--",
-Ê",Ê
-
ÊEÊ*"//
Ê -/-
>>ÃÌ
Catalog Shown with splice box
Number Description and mounting brackets attached
Ê - {Ê -«ViÊ Ý
Ê Ó £Ê ÕÌ}Ê À>ViÌÃÊ-iÌÊvÊÓ®
Ê /*xÊ i>`Ê7ÀiÊVÛiÀÃ - {
Ó £
/*x
Lamp niversal Line Max. Line Input Case Case Weight Each
Watts/Type Number oltage Current Amps. Watts Length Diameter (Lbs.)
Ê "iÊ{ääÊ 7*££ÎäÎÊ £ÓäÊÀÊ {°ääÊ {xxÊ Ç¸Ê ÈÊ£ÉÓ¸Ê Î£Ê
Ê xÊÀÊÎÎÊ Ê ÓänÊÀÊ Ó°Îä
Ê Ê Ê Ó{äÊÀÊ Ó°ää
Ê Ê Ê ÓÇÇÊ £°Çä
Ê /ÜÊ{ääÊ 7*Ó£ÎäÇÎÊ £ÓäÊÀÊ n°ääÊ £äÊ ££ÊÎÉn¸Ê ÈÊ£ÉÓ¸Ê xä
Ê xÊÀÊÎÎÊ Ê Ó{äÊ {°ää
Ê /ÜÊ{ääÊ 7*Ó£Îä£ÇÊ ÓÇÇÊÀÊ Î°{äÊ £äÊ ££ÊÎÉn¸Ê ÈÊ£ÉÓ¸Ê xä
Ê xÊÀÊÎÎÊ Ê {näÊ Ó°ää
Non-PCB Capacitor
Catalog utput Current Watts Max Input Nom. pen Wiring Dimensions (Inches) Dry Film il Filled Weight
Number olts Type Input Current Circuit . Dia. Fig. A B Mfd Min olts Dia (In.) Ht (In.) val (In.) Ht (In.) (lbs.)
Ê£nÊ7>ÌÌÊ*-Ê>«
71A0201 £ÓäÊ 8 *Ê Î£Ê £°£äÊ Î£xÊ Ê £Ê ä°ÇäÊ Ó°£Ê Ê Ê Ê Ê Ê Ê Ó°x
Ê 8*
Ê Î£ÊÊ ä°äÊ ÊΣxÊ ÊÊ £ÊÊ ä°ÇäÊÊ Ó°£ÊÊ Óä°äÊ £ÓäÊ £°ÓxÊ Ó°ÇxÊ Ê Ê Î°ä
71A0280 £ÓäÉÓÇÇÊ 8 *Ê ÎäÊ ä°nÉä°{ÎÊ Î£xÊ +Ê £Ê £°ääÊ Ó°{Ê Ê Ê Ê Ê Ê Ê {°ä
Ê 8*
Ê ÎäÊ ä°äÉä°{äÊ ÊΣxÊ +Ê £Ê £°ääÊÊ ÊÓ°{Ê x°äÊ ÓxäÊ £°ÓxÊ Ó°ÇxÊ Ê Ê {°x
ÊÎxÊÀÊxxÊ7>ÌÌÊ*-Ê>«
71A0450 £ÓäÉÓ{äÊ 8*
Ê ÈäÉnäÊ Ó°xäÉ£°ÓxÊ {näÊ +Ê £Ê Ó°ÓxÊ Î°xÊ £{Ê Ó{äÊ £°xäÊ Ó°ÇxÊ Ê Ê n°ä
ÊÇ£ä{ä £ÓäÉÓÓäÊ 8*Ê ÈäÉnäÊ Ó°xäÉ£°{äÊ {näÊ +Ê £Ê Ó°ÓxÊ Î°xÊ £{Ê Ó{äÊ £°xäÊ Ó°ÇxÊ Ê Ê n°ä
Electrical
71A0410 ÓänÊ 8*Ê ÈäÉnäÊ £°{xÊ {näÊ +Ê £Ê Ó°ÓxÊ Î°xÊ £{Ê Ó{äÊ £°xäÊ Ó°ÇxÊ Ê Ê n°ä
71A0430 ÓÇÇÊ 8*Ê ÈäÉnäÊ £°£äÊ {näÊ +Ê £Ê Ó°ÓxÊ Î°xÊ £{Ê Ó{äÊ £°xäÊ Ó°ÇxÊ Ê Ê n°ä
71A0440 {näÊ ,*
Ê ÈäÉnäÊ ä°ÈäÊ {näÊ
Ê £Ê Ó°ääÊ Î°ÎÊ Î°ÎÊ {näÊ Ê Ê £°ÓxÊ Ó°ÈxÊ Ç°ä
ÊäÊ7>ÌÌÊ*-Ê>«
71A0550 £ÓäÉÓ{äÊ 8*
Ê £ÓxÊ {°äÉÓ°äÊ xääÊ +Ê ÓÊ £°ÇxÊ Î°ÎÊ £Ç°xÊ ÓnäÊ £°xäÊ Î°ÈxÊ Ê Ê ££
ÊÇ£äxä £ÓÇÉÓÓäÊ 8*Ê £ÓxÊ Î°ÉÓ°ÓxÊ xääÊ +Ê ÓÊ £°ÇxÊ Î°ÎÊ £Ç°xÊ ÓnäÊ £°xäÊ Î°ÈxÊ Ê Ê ££
71A0560 ÓänÉÓÇÇÊ 8*Ê £ÓxÊ Ó°ÎÉ£°ÇÊ xääÊ +Ê ÓÊ £°ÇxÊ Î°ÎÊ £Ç°xÊ ÓnäÊ £°xäÊ Î°ÈxÊ Ê Ê ££
71A0540 {näÊ ,*
Ê £ÓxÊ ä°äÊ {näÊ
Ê ÓÊ £°ÇxÊ Î°ÎÊ x°äÊ {näÊ Ê Ê £°ÓxÊ Ó°ÈxÊ ££
Ê£ÎxÊÀÊ£näÊ7>ÌÌÊ*-Ê>«
71A0750 £ÓäÉÓ{äÊ 8*
Ê £ÇnÉÓÓäÊ x°ÓÉÓ°ÈÊ ÈnäÊ +Ê ÎÊ Ó°{äÊ {°äÊ £È°äÊ ÎÎäÊ Ê Ê £°xäÊ Î°ÈxÊ £È°n
ÊÇ£äÇä £ÓÇÉÓÓäÊ 8*
Ê £ÇnÉÓÓäÊ x°äÉÓ°nÊ ÈnäÊ +Ê ÎÊ Ó°{äÊ {°äÊ £È°äÊ ÎÎäÊ Ê Ê £°xäÊ Î°ÈxÊ £È°n
71A0760 ÓänÉÓÇÇÊ 8*
Ê £ÇnÉÓÓäÊ Ó°ÉÓ°ÎÊ ÈnäÊ +Ê ÎÊ Ó°{äÊ {°äÊ £È°äÊ ÎÎäÊ Ê Ê £°xäÊ Î°ÈxÊ £È°n
71A0740 {näÊ ,*
Ê £ÇnÉÓÓäÊ £°ÎäÊ ÈnäÊ
Ê ÎÊ Ó°{äÊ {°äÊ £È°äÊ ÎÎäÊ Ê Ê £°xäÊ Î°ÈxÊ £È°n
NOTE: ÀÊ8Ê>`Ê,ÊVÀVÕÌÃ]Êw}ÕÀiÊÊ
}
iÃÌÊvÊÃÌ>ÀÌ}]Ê«iÀ>Ì}ÊÀÊ«iÊVÀVÕÌÊVÕÀÀiÌ°
,
/Ê
-" -
Ballast
Dimensions Fig. L W M S
Ê £Ê x°£Ê £°ääÊ {°xäÊ ä°Óx
Ê ÓÊ È°xÊ £°ÓxÊ x°ÇxÊ ä°Ón
Ê ÎÊ Ç°nÊ Ó°ÇxÊ È°£ÎÊ ä°Óx
}°Ê£ }°ÊÓ }°ÊÎ
ÊxäÊ7>ÌÌÊ-ÈnÊ*-Ê>«
Ç£Çnä£ää£
£ÓäÉÓÇÇÊ 8*Ê ÈÈÊ £°äÉä°xÊ £ÓxÊ Ê £Ê £°äÊ Ó°ÓÊ x°äÊ ÎääÊ £°ÓxÊ Ó°äÊ Ê Ê Î°x
ÊÇäÊ7>ÌÌÊ-ÈÓÊ*-Ê>«
ÊÇ£ÇÇ£ää£
£ÓäÉÓänÉÊ 8*Ê £Ê £°{Éä°ÉÊ £ÓäÊ Ê £Ê £°xÊ Î°£Ê ÇÊ ÎääÊ £°ÓxÊ Ó°äÊ Ê Ê x°x
Ó{äÉÓÇÇÊ Ê Ê ä°nÉä°ÇÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
£ääÊ7>ÌÌÊ-x{Ê*-Ê>«
Electrical
ÊÇ£näÇ£ää£
£ÓäÉÓänÉÊ 8*Ê £ÎäÊ Ó°ÓÉ£°ÎÉÊ £ÓäÊ Ê £Ê Ó°äÊ Î°ÈÊ £äÊ ÓnäÊ £°xäÊ Ó°äÊ Ê Ê Ç°x
Ó{äÉÓÇÇÊ Ê Ê £°£Éä°Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Ê£xäÊ7>ÌÌÊ-xxÊ*-Ê>«
ÊÇ£n£ÇÓää£
£ÓäÉÓänÉÊ 8*Ê £nnÊ Ó°nÉ£°ÈÉÊ £ÓäÊ Ê £Ê Ó°xÊ Î°nÊ £{Ê ÓnäÊ £°xäÊ Ó°äÊ Ê Ê Ç°x
Ó{äÉÓÇÇÊ Ê Ê £°{É£°ÎÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
ÊÇ£n£{Óää£
{näÊ 8*Ê £nnÊ ä°ÇÊ £ÓäÊ Ê £Ê ΰäÊ {°ÎÊ £{Ê ÓnäÊ £°xäÊ Ó°äÊ Ê Ê °ä
ÓxäÊ7>ÌÌÊ-xäÊ*-Ê>«
ÊÇ£nÓÇ£ää£
£ÓäÉÓänÉÊ
7Ê ÓxÊ Ó°xÉ£°xÉÊ £nxÊ Ê ÓÊ £°nÊ Î°xÊ ÎxÊ Ó{äÊ £°ÇxÊ Î°ÇxÊ Ê Ê ££°ä
Ó{äÉÓÇÇÊ Ê Ê £°ÎÉ£°£Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
ÊÇ£nÓ{£ää£
{näÊ
7Ê Î£äÊ ä°ÇÊ £nxÊ Ê ÓÊ £°nÊ Î°xÊ ÎxÊ Ó{äÊ £°ÇxÊ Î°ÇxÊ Ê Ê ££°ä
Ê{ääÊ7>ÌÌÊ-x£Ê*-Ê>«
ÊÇ£n{ÇÎää£
£ÓäÉÓänÉÊ
7Ê {È{Ê Î°nÉÓ°ÓÉÊ £äÊ Ê ÓÊ Ó°ÎÊ {°äÊ xxÊ Ó{äÊ £°ÇxÊ x°£xÊ Ê Ê £Î°x
Ê Ê Ó{äÉÓÇÇÊ Ê Ê £°É£°ÇÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Ç£n{{Îää£
{näÊ
7Ê {È{Ê £°äÊ £äÊ Ê ÓÊ Ó°ÈÊ {°ÎÊ xxÊ Ó{äÊ £°ÇxÊ x°£xÊ Ê Ê £x°ä
Ê£äääÊ7>ÌÌÊ-xÓÊ*-Ê>«
71A8773-001 (1)
£ÓäÉÓänÉÊ
7Ê ££ääÊ °xÉx°xÉÊ {ÎxÊ Ê n>Ê Î°nÊ x°nÊ ÓÈÊ xÓxÊ Ê Ê £°ÇxÊ x°ÓxÊ Ón°ä
Ó{äÉÓÇÇÊ Ê Ê {°nÉ{°ÓÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
71A8743-001 (1)
{näÊ
7Ê ££ääÊ Ó°nÊ {ÎxÊ Ê n>Ê Î°nÊ x°nÊ ÓÈÊ xÓxÊ Ê Ê £°ÇxÊ x°ÓxÊ Ón°ä
NOTE: ÊÊÕÃiÊxx£{Ê}ÌÀ°ÊÊ
µÕ««i`ÊÜÌ
Ê>Ê>ÕÌÀiÃiÌÊÌ
iÀ>Ê«ÀÌiVÌÀÊÌÊ«ÀiÛiÌÊ}ÌÀÊvÀÊÛiÀ
i>Ì}ÊÊÌ
iÊiÛiÌÊvÊ>«Êv>ÕÀi°
(1)
ÇäÊ7>ÌÌÊnÊi`ÕÊ >Ãi®ÊÀÊ£{ÎÊÊ>«
ÊÇ£xÓÓää£Ê(1)
£ÓäÉÓänÉÊ 8*Ê äÊ £°É£°äÉÊ ÓxxÊ Ê £Ê £°xÊ Ó°nÊ n°äÊ ÓnäÊ £°ÓxÊ Ó°äÊ Ê Ê x°ä
Ó{äÉÓÇÇÊ Ê Ê ä°Éä°nÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
£ääÊ7>ÌÌÊäÊÀÊ£{äÊÊÊ>«
ÊÇ£xÎäää£Ê(1)
£ÓäÉÓänÉÊ 8*Ê £ÓÊ Ó°ÈÉ£°xÉÊ ÓnäÊ Ê £Ê £°xÊ Ó°Ê £ÓÊ ÓnäÊ £°xäÊ Ó°äÊ Ê Ê x°x
Ó{äÉÓÇÇÊ Ê Ê £°ÎÉ£°ÓÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Electrical
£ÇxÊ7>ÌÌÊxÇÊÀÊÎÆÊÀÊ£xäÊ7>ÌÌÊ£äÇÊÊ>«
Ç£xxÇäää£
£ÓäÉÓänÉÊ
7Ê Ó£äÊ £°nÉ£°£ÉÊ ÎäxÊ Ê £Ê Ó°xÊ Î°ÇÊ £äÊ {ääÊ £°xäÊ Î°ÇxÊ Ê Ê È°n
Ó{äÉÓÇÇÊ Ê Ê ä°Éä°nÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Ç£xx{äää£
{näÊ
7Ê Ó£äÊ ä°xÊ ÎäxÊ Ê £Ê Ó°xÊ {äÊ £äÊ {ääÊ £°xäÊ Î°ÇxÊ Ê Ê n°x
ÓxäÊ7>ÌÌÊxnÊÀÊÎÇÊÊ>«
ÊÇ£xÇÇäää£
£ÓäÉÓänÉÊ
7Ê ÓxÊ Ó°xÉ£°{ÉÊ ÎääÊ Ê ÓÊ £°xÊ Î°äÊ £xÊ {ääÊ £°ÇxÊ Î°ÇxÊ Ê Ê °ä
Ó{äÉÓÇÇÊ Ê Ê £°ÎÉ£°£Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
ÊÇ£xÇ{äää£
{näÊ
7Ê ÓxÊ ä°ÇÊ Î£xÊ Ê ÓÊ £°ÇÊ Î°£Ê £xÊ {ääÊ £°ÇxÊ Î°ÇxÊ Ê Ê £ä°ä
Ê{ääÊ7>ÌÌÊxÊÀÊÎÎÊÊ>«
ÊÇ£ÈäÇ£ää£
£ÓäÉÓänÉÊ
7Ê {xnÊ {°äÉÓ°ÎÉÊ ÎääÊ Ê ÓÊ Ó°ÓÊ {°äÊ Ó{Ê {ääÊ £°ÇxÊ x°£xÊ Ê Ê ££°x
Ê Ê Ó{äÉÓÇÇÊ Ê Ê Ó°äÉ£°ÇÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Ç£Èä{£ää£
{näÊ
7Ê {ÈÓÊ £°äÊ ÎääÊ Ê ÓÊ Ó°ÓÊ {°äÊ Ó{Ê {ääÊ £°ÇxÊ x°£xÊ Ê Ê £Ó°ä
Ê£äääÊ7>ÌÌÊ{ÇÊÀÊÎÈÊÊ>«
71A6572-001 (3)
£ÓäÉÓänÉÊ
7Ê £änäÊ °äÉx°ÓÉÊ {ÎäÊ Ê nÊ Ó°nÊ {°xÊ Ó{Ê {näÊ Ê Ê £°ÇxÊ Î°äÊ Ó£°ä
Ê Ê Ó{äÉÓÇÇÊ Ê Ê {°xÉΰ
71A6542-001 (3)
Ê Ê {näÊ
7Ê £änäÊ Ó°ÓÊ {ÎäÊ Ê nÊ Ó°nÊ {°xÊ Ó{Ê {näÊ Ê Ê £°ÇxÊ Î°äÊ Ó£°ä
£xääÊ7>ÌÌÊ{nÊÊ>«
71A6772-001 (3)
£ÓäÉÓänÉÊ
7Ê £ÈäxÊ £Î°xÉÇ°nÉÊ {xäÊ Ê n>Ê {°£Ê È°£Ê ÎÓÊ xÓxÊ Ê Ê Ó°ääÊ Î°äÊ Îä°ä
Ó{äÉÓÇÇÊ Ê Ê È°nÉx°Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
71A5540-001 (3)
{näÊ
7Ê £ÈÓxÊ Î°{Ê {xäÊ Ê n>Ê {°ÓÊ È°ÓÊ ÎÓÊ xÓxÊ Ê Ê Ó°ääÊ Î°äÊ Î£°ä
NOTE: (1)
Ê1ÃiÃÊxÎÎ{Ê}ÌÀ°ÊÊ (3)Ê1Ê
>ÃÃÊ ÊÓääcÊ
°
Ê£ääÊ7>ÌÌÊÎnÊ6Ê>«
Ç£ÓxÇ£ää£
£ÓäÉÓänÉÊ
7Ê £ÓxÊ £°£Éä°ÈÉÊ ÓxäÊ Ê £Ê £°xÊ Ó°nÊ £äÊ ÓnäÊ £°xäÊ Ó°äÊ Ê Ê x°ä
Ê Ê Ó{äÉÓÇÇÊ Ê Ê ä°ÈÉä°x
£ÇxÊ7>ÌÌÊÎÊ6Ê>«
ÊÇ£ÎäÇÓää£
£ÓäÉÓänÉÊ
7Ê ÓäxÊ £°É£°£ÉÊ Ó£xÊ Ê £Ê £°nÊ Ó°Ê £Ç°xÊ Ó{äÊ £°xäÊ Î°ÇxÊ Ê Ê x°ä
Ó{äÉÓÇÇÊ Ê Ê £°äÉä°
Electrical
Ç£Îä{Óää£
{näÊ
7Ê ÓääÊ ä°xÊ Ó{äÊ Ê £Ê £°nÊ Ó°Ê £Ç°xÊ Ó{äÊ £°xäÊ Î°ÇxÊ Ê Ê x°x
ÓxäÊ7>ÌÌÊÎÇÊ6Ê>«
ÊÇ£ÎxÇÓää£
£ÓäÉÓänÉÊ
7Ê ÓnxÊ Ó°xÉ£°{ÉÊ ÓxäÊ Ê £Ê Ó°xÊ Î°ÇÊ ÓÓ°xÊ ÓnäÊ £°ÇxÊ Î°ÇxÊ Ê Ê Ç°x
Ó{äÉÓÇÇÊ Ê Ê £°ÎÉ£°£
Ç£Îx{Óää£
{näÊ
7Ê ÓnxÊ ä°ÇÊ ÓxäÊ Ê £Ê Ó°ÎÊ Î°{Ê ÓÓ°xÊ ÓnäÊ £°ÇxÊ Î°ÇxÊ Ê Ê Ç°ä
{ääÊ7>ÌÌÊÎÎÊ6Ê>«
ÊÇ£{äÇ£ää£
£ÓäÉÓänÉÊ
7Ê {x{Ê Î°ÉÓ°ÓÉÊ Ó{xÊ Ê ÓÊ £°nÊ Î°ÎÊ ÎxÊ Ó{äÊ £°ÇxÊ x°£xÊ Ê Ê £ä°x
Ó{äÉÓÇÇÊ Ê Ê Ó°äÉ£°ÇÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
Ç£{ä{£ää£
{näÊ
7Ê {x{Ê £°äÊ Ó{xÊ Ê ÓÊ £°ÇÊ Î°ÓÊ ÎxÊ Ó{äÊ £°ÇxÊ x°£xÊ Ê Ê £ä°ä
£äääÊ7>ÌÌÊÎÈÊ6Ê>«
71A5070-001
£ÓäÉÓänÉÊ
7Ê £äÇxÊ °nÉx°ÈÉÊ {ÓxÊ Ê nÊ Ó°Ê {°nÊ Ó{Ê {xäÊ Ê Ê £°ÇxÊ Î°äÊ Óx°ä
Ó{äÉÓÇÇÊ Ê Ê {°É{°ÎÊ Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê Ê
71A5040-001
{näÊ
7Ê £änäÊ Ó°ÎÊ {ÓxÊ Ê nÊ Ó°Ê {°nÊ Ó{Ê {xäÊ Ê Ê £°ÇxÊ Î°äÊ Óx°ä
,
/Ê
-" -
Ballast
Dimensions Fig. L W M S
Ê £Ê x°£Ê £°ääÊ {°xäÊ ä°Óx
Ê ÓÊ È°xÊ £°ÓxÊ x°ÇxÊ ä°Ón
Ê nÊ Ç°nÊ Ó°ÇxÊ È°£ÎÊ ä°Óx
/
ÃÊ V«>ÌÊ vÊ vÀ>ÌÊ ÃÊ «ÀiÃiÌi`Ê ÞÊ vÀÊ Ì
iÊ Ì
iÃiÊV>ÃiÃÊÌ
iÊVÌÀ>VÌÀÊÕÃÌÊÀiÌÕÀÊÌ
iÊL>>ÃÌÃÊ`ÀiVÌÞÊÌÊ>}i/iÊvÀÊLÌ
ÊÌ
iÊ
VÛiiViÊ vÊ ÕÀÊ VÕÃÌiÀÃ]Ê >`Ê ÌÊ >ÃÊ >Ê ÃÌ>ÌiiÌÊ ÀÊ >Ü>ViÊ>`ÊÌ
iÊÀi«>ViiÌÊÕÌ°ÊÊ*i>ÃiÊV>Ê>}i/iÊ>ÌÊ£nää -/ÊÌÊ
>vwÀ>ÌÊvÊÌ
iÊ>Õv>VÌÕÀiÀÃÊÜ>ÀÀ>ÌÞÊ«ViðÊÊ7>ÀÀ>ÌiÃÊÊ >ÀÀ>}iÊvÀÊÀi«>ViiÌÊ>`Ê>LÀÊ>ÕÌ
Àâ>ÌÊ`ÀiVÌÞÊvÀÊ>}i/i°ÊÊÌiÀÃÌ>ÌiÊ
>ÀiÊ vviÀi`Ê LÞÊ Ì
iÊ >Õv>VÌÕÀiÀÃ]Ê ÌÊ LÞÊ ÌiÀÃÌ>ÌiÊ
iVÌÀVÊ ÃÊÌÊÛÛi`ÊÊÌ
iÃiÊ>LÀÊ>Ü>ViÊ>`ÊiÝV
>}iÊÃÌÕ>Ìð
ÌiÀÃÌ>Ìi®]Ê >`Ê ÌiÀÃÌ>ÌiÊ ÃÊ Ê Ê Ü>ÞÊ ÀiëÃLiÊ vÀÊ Ì
iÊ
«iÀvÀ>ViÊÀÊÃÕÌ>LÌÞÊvÊ>ÞÊÜ>ÀÀ>ÌÞ°ÊÊÊÌiÀÃÌ>Ìi¿ÃÊÀiÊ >}i/i¿ÃÊ/iV
V>Ê
}iiÀ}Ê-iÀÛViÊ/
-®Ê«À}À>Ê>««iÃÊÌÊ1ÛiÀÃ>Ê>`Ê
ÊÌ
iÊÜ>ÀÀ>ÌÞÊ«ÀViÃÃÊÃÊÞÊÌÊv>VÌ>ÌiÊL>>ÃÌÊiÝV
>}iÃÊ /À>`ÊiiVÌÀVÊL>>ÃÌðÊÊ/
-Ê«ÀÛ`iÃÊÌiV
V>Ê>`ÊÜ>ÀÀ>ÌÞÊÃÕ««ÀÌ°ÊÊ
ÌÀ>VÌÀÃÊ
vÀÊÌ
iÊVÛiiViÊvÊÌ
iÊVÌÀ>VÌÀÊ>`ÊÌ
iÊ>Õv>VÌÕÀiÀ°ÊÊ/
iÊ ÕÃÌÊÀiÌÕÀÊÌ
iÊL>>ÃÌÊ`ÀiVÌÞÊÌÊ>}i/iÊvÀÊLÌ
ÊÊÀi«>ViiÌÊ>`Ê«ÃÃLiÊ
vÕÊ ÃÌ>ÌiiÌÃÊ vÊ Ì
iÊ Ü>ÀÀ>ÌiÃÊ V>Ê ÕÃÕ>ÞÊ LiÊ vÕ`Ê Ê Ì
iÊ >LÀÊ>Ü>Vi°ÊÊ*i>ÃiÊV>Ê>}i/iÊ>ÌÊ£nää -/Ê>`Ê>ÃÊvÀÊ/
-ÊÌÊ
>Õv>VÌÕÀiÀÃÊëiVwVÊ«À`ÕVÌÊÊV>Ì>}ðÊÊ/iÀÃÊ>`ÊV`ÌÃÊ >ÀÀ>}iÊvÀÊÀi«>ViiÌÊ>`Ê>LÀÊ>ÕÌ
Àâ>ÌÊ`ÀiVÌÞÊvÀÊ>}i/i°ÊÊÌiÀÃÌ>ÌiÊ
vÊÌ
iÊÜ>ÀÀ>ÌiÃÊ>ÀiÊÃÕLiVÌÊÌÊV
>}iÊÜÌ
ÕÌÊÌVi°ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊ ÃÊÌÊÛÛi`ÊÊÌ
iÃiÊ>LÀÊ>Ü>ViÊ>`ÊiÝV
>}iÊÃÌÕ>ÌðÊÊÞÊvÊÌ
iÃiÊ
iiVÌÀVÊL>>ÃÌÃÊÀiÌÕÀi`ÊÌÊÌiÀÃÌ>ÌiÊvÀÊÀi«>ViiÌÊÞÊÜÊLiÊvÀÜ>À`i`Ê
ÌiÀÃÌ>ÌiÊ
iVÌÀVÊÃÊ>ÊÜ>ÀÀ>ÌÞÊÃiÀÛViÊÃÌ>ÌÊvÀÊÃÌÊvÊÌ
iÊL>>ÃÌÃÊÃ
ÜÊÊ ÌÊ>}i/iÊvÀÊÌiÃÌ}Ê>`Ê>««ÀÛ>°ÊÊ,i«>ViiÌÃÊV>ÊLiÊ}ÛiÊÞÊ>vÌiÀÊ
Electrical
Ì
ÃÊV>Ì>}Ê>`ÊÃÊ>ÕÌ
Àâi`ÊÌÊ}ÛiÊ>ÊivÀiÊiÝV
>}iÊvÀÊ`iviVÌÛiÊL>>ÃÌÃÊ >}i/iÊ>««ÀÛ>°ÊÊ >>ÃÌÃÊÌ
>ÌÊÌiÃÌÊ}`ÊÜÊLiÊÀiÌÕÀi`°ÊÊÊÊÊÊÊÊ
ÃÌÊ Õ`iÀÊ Ü>ÀÀ>ÌÞ°Ê Ê ÌiÀÃÌ>ÌiÊ V>Ê ÕÃÕ>ÞÊ }ÛiÊ ÛiÀÌ
iVÕÌiÀÊ iÝV
>}iðÊÊ
ÜiÛiÀ]ÊÃiÊ>Õv>VÌÕÀiÀÃ]ÊvÀÊÃiÊ«À`ÕVÌÊiÃ]ÊvÀÊ«>ÀÌVÕ>ÀÊÃÌ>>ÌÃÊ Î°ÊÊ
/
ÊUÊ1 6
,-Ê°°°Ê -/-ÊÊ>ÀiÊÜ>ÀÀ>Ìi`ÊvÀÊÓÊÞi>ÀÃÊvÀÊ
ÀʵÕ>ÌÌiÃ]ÊÀiµÕÀiÊÌ
iÊ`ÊL>>ÃÌÃÊÌÊLiÊÀiÌÕÀi`ÊvÀÊÌiÃÌ}ÊÀÊiÛ>Õ>ÌÊLivÀiÊ `>ÌiÊvÊ>Õv>VÌÕÀiÊ>`Ê
>ÛiÊ>Ê`>ÌiÊV`iÊÃÌ>«i`ÊÊÌ
iÊL>>ÃÌ°ÊÊ/
iÊ`>ÌiÊV`iÊ
>ÊiÝV
>}iÊV>ÊLiÊ}Ûi°ÊÊ-iÊ>Õv>VÌÕÀiÀÃÊÀiÌÕÀÊL>>ÃÌÃÊÌ
>ÌÊÌiÃÌÊ}`Ê vÀÊÊVÀiÊ>`ÊVÊL>>ÃÌÃÊÃÊ«ÀiwÝi`ÊÜÌ
ÊÌ
iÊi>}iÃÃÊiÌÌiÀʸ ¸°ÊÊ/
iÊ`>ÌiÊ
À>Ì
iÀÊÌ
>Ê«ÀÛ`iÊ>ÊiÝV
>}i°Ê V`iÊ`V>ÌiÃÊÌ
iÊÌ
Ê>`ÊÞi>ÀÊvÊ>Õv>VÌÕÀiÀ°ÊÊ
Ý>«i\ÊÊ xÊ`iÌiÃÊ
Ì
iÊÞi>ÀÊ£xÊ>`ÊÌ
iÊÌ
Ê«ÀÆÊÊ ÈÊ`iÌiÃÊ£È]Ê"VÌLiÀ°ÊÊ/
iÊ`>ÌiÊ
ÃÌÊL>>ÃÌÊ>Õv>VÌÕÀiÀÃÊÜ>ÀÀ>ÌÞÊÌ
iÀÊ«À`ÕVÌÃÊ>}>ÃÌÊv>ÕÀiÊ`ÕiÊÌÊ`iviVÌÃÊ V`iÊvÀÊiV>Ãi`Ê>`Ê«ÌÌi`ÊL>>ÃÌÃÊ>ÀiÊ`vviÀiÌ°ÊÊ/
iÊÞi>ÀÊvÊ>Õv>VÌÕÀiÊÃÊ
Ê >ÌiÀ>Ê ÀÊ ÜÀ>Ã
«Ê vÊ Ì
iÊ L>>ÃÌÃÊ
>ÛiÊ LiiÊ ÃÌ>i`Ê >`Ê «iÀ>Ìi`Ê «ÀiVi`i`Ê ÜÌ
Ê >Ê iÌÌiÀÊ `V>Ì}Ê Ì
iÊ Ì
Ê vÊ >Õv>VÌÕÀi°Ê Ê
Ý>«i\Ê Ê xÊ
Ê>VVÀ`>ViÊÜÌ
ÊÌ
iÊ>««V>LiÊ«ÀÛÃÃÊvÊÌ
iÊ >Ì>Ê
iVÌÀVÊ
`iÊ>`Ê `iÌiÃÊ>Õ>ÀÞ]Ê£x°ÊÊÊ
Ì
iÊ1`iÀÜÀÌiÀÃÊ>LÀ>ÌÀiÃÊÃÌ>`>À`ÃÊvÀÊÃ>viÌÞ°ÊÊÃÌÊ>ÃÊÀiµÕÀiÊÌ
>ÌÊÌ
iÊ
L>>ÃÌÃÊ
>ÛiÊLiiÊ}ÀÕ`i`Ê>`ÊÕÃÌÊÌÊ
>ÛiÊLiiÊÃÕLiVÌi`ÊÌÊ>LÀ>Ê {°ÊÊ"-,-96 Ê"-®Ê+1
/,"
Ê
/,"
Ê8/1,
Ê -/-Ê>ÀiÊ
ÃÌÀiÃÃiÃÊVÕ`}ÊLi}Ê«iÀ>Ìi`Ê>ÌÊÌi«iÀ>ÌÕÀiÃÊÊiÝViÃÃÊvÊäÊ`i}ÀiiÃÊ
°ÊÊ Ü>ÀÀ>Ìi`ÊÌÊÌ
iÊ«ÕÀV
>ÃiÀÊvÀÊÕ«ÊÌÊÈäÊÌ
ÃÊÊ>Ê"ÃÀ>Ê>««ÀÛi`ÊÃÌ>>Ì°ÊÊÊ
/
iÊ>Õv>VÌÕÀiÀÃ]ÊÊ}iiÀ>]ÊÃÌ>ÌiÊÌ
>ÌÊÌ
iÀÊ>LÌÞÊÊ>ÞÊV>ÊvÊ>ÞÊ`Ê ÃiÀ>ÊÕLiÀÊÃÊÃÌ>«i`ÊÊÌ
iÊi`ÊvÊÌ
iÊL>>ÃÌÊÜ
V
ÊVÌ>ÃÊÌ
iÊÞi>ÀÊ>`ÊÜiiÊ
Ã
>ÊÊÊV>ÃiÊiÝVii`ÊÌ
iÊVÃÌÊvÊÌ
iÊL>>ÃÌÊÜ
V
Ê}ÛiÃÊÀÃiÊÌÊÌ
iÊV>°Ê/
iÞÊ vÊ>Õv>VÌÕÀiÊÊÌ
iÊwÀÃÌÊvÕÀÊ`}ÌðÊÊ
Ý>«i\ÊÊx{£äxÎn-ÓÊ`iÌiÃÊ£x]Ê{£ÃÌÊ
>iÊÊV>Ê>ÃÊÌÊÌ
iÊÃÕÌ>LÌÞÊvÊÌ
iÀÊ«À`ÕVÌÃÊ>`ÊÀiÃiÀÛiÊÌ
iÊÀ}
ÌÊÌÊLiÊ Üii°ÊÊ
ÌÀ>VÌÀÃÊVÌi«>Ì}Ê>Ê"-ÊL>>ÃÌÊÃÌ>>ÌÊÃ
Õ`ÊVÌ>VÌÊÌiÀÃÌ>ÌiÊ
Ì
iÊÃiÊÕ`}iÊvÊÌ
iÊL>>ÃÌÊÃÊÊv>VÌÊ`iviVÌÛi°ÊÊ-iÊëiVwVÊÜ>ÀÀ>ÌÞʵÕ>vÞ}Ê ÀÊ«
iÊ"-Ê>ÌÊ£nää/ 1 ÊÌÊ`iÌiÀiÊÌ
iÊÜ>ÀÀ>ÌÞÊ«iÀ`Ê>Üi`ÊvÀÊÌ
>ÌÊ
>`Ê
>`}ÊV`ÌÃÊ>ÀiÊ}ÛiÊLiÜ° ÃÌ>>Ì°ÊÊÊ/
iÊ«iÀ`ÊÜÊ`i«i`ÊÊ«iÀ>Ì}ÊV`Ìð
ÛiÀÊUÊ,>Ãi`Ê£É{¸
Ê ,
nÈäÊ >Ê £ääÊ ££
Ê ,
nÈÎÊ -}iÊ,iVi«Ì>ViÊ ÓxÊ £ä
Ê ,
nÈ£Ê 7Ì
Ê£ÉÓ¸ÊVÕÌÊ ÓxÊ ££ ,
nÈ{
Ê ,
nÈ{Ê Õ«iÝÊÕÃ
Ê,iVi«Ì>ViÊ £ääÊ ,
nȣ
Ê ,
nÈxÊ "iÊ/}}iÊ-ÜÌV
Ê £ääÊ £ä
,
nÈÎ
,
nÈä ,
nÈx
ÛiÀÊUÊ,>Ãi`Ê£É{¸
Ê ,
ÇxÓÊ >Ì]ÊL>Ê £ääÊ Î£
Ê ,
ÇxÈÊ
iÌiÀÊL>i`ÊÜÌ
ÊÌ>««i`Êi>ÀÃÊÊ xäÊ Ó{
Ê ,
ÇxÎÊ >ÌÊÜÌ
Ê£ÉÓ¸ÊVÕÌÊ xäÊ Î£
,
ÇxÓ ,
ÇxÈ ,
ÇxÎ
ÛiÀÊUÊ,>Ãi`Ê£É{¸
Ê ,
ÇÓÓÊ >Ì]ÊL>Ê xäÊ ÓÈ ,
ÇÓÓ ,
ÇÓ{
Ê ,
ÇÓ{Ê >ÌÊÜÌ
Ê£ÉÓ¸ÊVÕÌÊ xäÊ ÓÇ
Electrical
ΣÉÓ¸Ê"
/" Ê-/
Ê "8
-ÊEÊ
"6
,-
>Û>âi`Ê-ÌiiÊUÊ 7i>Ì
iÀ«Àv
Catalog Knockouts Standard Weight/100
Number Each Side Each End Bottom Package (Lbs.)
ÝÊUÊ££ÉÓ¸Êii« ,
££ä ,
ÇÓÓ
Ê ,
££äÊ £ÊqÊ£ÉÓÊ £ÊqÊ£ÉÓÊ £ÊqÊ£ÉÓÊ xäÊ {Ó
ÛiÀÊUÊ,>Ãi`Ê£É{¸
Ê ,
ÇÓÓÊ >Ì]ÊL>Ê £ääÊ £n
Ê ,
ÇÓ{Ê >ÌÊÜÌ
Ê£ÉÓ¸ÊVÕÌÊ ÓxÊ £n
Ê ,
ÇÎ£Ê Õ«iÝÊ,iVi«Ì>ViÊ xäÊ £n
,
ÇÓ{ ,
ÇΣ
"iÊÊ>}Ê
ÛiÀ
xÎÎxä
x£ÇÎä
x£Çxä
Ê
x£ÇÎäÊ >Ê À>ÞÊ £ääÊ Ç
Ê
xÇ£ÓxÊ Õ«iÝÊ,iVi«Ì>Vi]ÊÊ-ivÊVÃ}Ê`Ê À>ÞÊ ÓxÊ {x
Ê
x£xxäÊ -}iÊ,iVi«Ì°]ÊÊ-ivÊ
ðÊ`]ÊÊ6iÀÌ°ÊÕÌÊ À>ÞÊ ÓxÊ ÎÓ
Ê 1Îä{näÊ 7Ì
Ê-ÜÌV
]Ê-}iÊ*i]Ê£äÉ£Óx6Ê À>ÞÊ ÓxÊ {Î
Ê 1Îä{nÓÊ 7Ì
Ê-ÜÌV
]Ê-}iÊ*i]ÊÓäÉ£ÓäÓÇÇ6Ê À>ÞÊ ÓxÊ xä
Ê 1Îä{nÈÊ 7Ì
Ê-ÜÌV
]ÊÕLiÊ*i]ÊÓäÉ£ÓäÓÇÇ6Ê À>ÞÊ ÓxÊ Èä
1Îä{nä]
/ÜÊÊ>}Ê
ÛiÀ
x£xxä
xÇ£Óx 1Îä{nÓ]Ê1Îä{nÈ
Ê
x£ÇxäÊ >Ê À>ÞÊ ÓxÊ £x
*-/
Ê7*/
-
Catalog Put
Electrical
" 1/Ê
,-
Catalog se Put Weight
Number Description Handle p (Lbs.)
Ê/"£nÇä£Ê ÊÊ i`iÀÊvÀÊ£ÉÓ¸Ê
/Ê /"£nÇ£Ê £Ê {°£
Ê/"£nÇäÓÊ ÊÊ i`iÀÊvÀÊÎÉ{¸Ê
/]Ê£ÉÓ¸Ê,}`Ê /"£nÇ£Ê £Ê {°Ó
Ê/"£nÇäÎÊ ÊÊ i`iÀÊvÀÊ£¸Ê
/]ÊÎÉ{¸Ê,}`Ê /"£nÇÓäÊ £Ê È°x
>`i
Ê/"£nÇ£Ê ÊÊ i`iÀÊ>`iÊÎÉ{¸ÊÝÊÎn¸Ê Ê £Ê Î°È i`iÀ
Ê/"£nÇÓäÊ ÊÊ i`iÀÊ>`iÊ£¸ÊÝÊ{{¸Ê Ê £Ê È°ä
,
1/Ê ,
,-
Catalog Put
Number Description p
-++"££xÊÊÊÊÊÊÊÊÊÊ-}iÊ*i]Ê£x]Ê£ÓäÉÓ{ä6
]Ê£Ê-«>ViÊ,iµÕÀi`Ê £
-++"£ÓäÊÊÊÊÊÊÊÊÊÊ-}iÊ*i]ÊÓä]Ê£ÓäÉÓ{ä6
]Ê£Ê-«>ViÊ,iµÕÀi`Ê £
-++"£ÎäÊÊÊÊÊÊÊÊÊÊ-}iÊ*i]ÊÎä]Ê£ÓäÉÓ{ä6
]Ê£Ê-«>ViÊ,iµÕÀi`Ê £
-1/
Ê 1- -
Catalog Put
Number Description Color .D. I.D. Mfgr. p
EAG-28 *>ÃÌVÊÜÌ
ÊVÕÌÊ >VÊ £ÉÓÊ"Ê £ÉÓÊ
>}iÊ xä
EAG-77 ,ÕLLiÀÊ->«Ê >VÊ £ÉÓÊ"Ê £ÉÓÊ
>}iÊ xä
EAG-28 EAG-77
Ê1 nÇxÊ *>ÃÌVÊ->«Ê >VÊ £ÉÓÊ"Ê Ê iÞVÊ xää
Ê1 £äääÊ *>ÃÌVÊ->«Ê >VÊ ÎÉ{Ê"Ê Ê iÞVÊ xää
Ê- ÓxäÓÊ *>ÃÌVÊ->«Ê >VÊ °Óxä¸Ê £ÉnÊ iÞVÊ xää
Ê- ÎÇx{Ê *>ÃÌVÊ->«Ê >VÊ °ÎÓx¸Ê £É{Ê iÞVÊ xää
Ê- xääÈÊ *>ÃÌVÊ->«Ê >VÊ °xää¸Ê ÎÉnÊ iÞVÊ xää
Ê- ÈÓxnÊ *>ÃÌVÊ->«Ê >VÊ °ÈÓx¸Ê £ÉÓÊ iÞVÊ xää
Ê- ÇxänÊ *>ÃÌVÊ->«Ê >VÊ °Çxä¸Ê £ÉÓÊ iÞVÊ xää - Ê ÕÃ
}
1 Ê ÕÃ
}
Ê- nÇx££Ê *>ÃÌVÊ->«Ê >VÊ £ÉÓÊ"Ê ££É£ÈÊ iÞVÊ xää
Ê- £äää£ÓÊ *>ÃÌVÊ->«Ê >VÊ ÎÉ{Ê"Ê ÎÉ{Ê iÞVÊ Óxä
-/, Ê,
Ê 1- -
>VÊ`i`ÊÞ°
£äxc
°Ê>Ý°Ê/i«°
9,Ó
Catalog Cable Cable (A) Min. (B) No (C) Max. (D) Body Put
Number Type Conductors Hole Dia. Rotation Thickness Length p
Ê -,Ó*{Ê -*/£Ê £nÉÓÊ °ÎÇxÊ °Î{xÊ °äÈÓÊ °{äÈÊ £ää
Ê -,Î*{Ê -*/£Ê £nÉÓÊ °{ÎÇÊ °ÎäÊ °ä{äÊ °{äÈÊ £ää
Ê -,È*{Ê -]Ê-/ÊEÊ-"Ê £nÉÓÊ °ÈÓxÊ °xxäÊ °£ÓxÊ ÎÇÉÈ{Ê £ää
Ê -,È Î{Ê -]Ê-/ÊEÊ-"Ê £ÈÉÓ]Ê£nÉÎ]Ê£{ÉÓ]Ê °ÈÓxÊ °xxäÊ °äÈÓÊ ÎÇÉÈ{Ê £ää
£ÈÉÎÊÀÊ£nÉ{
Ê -,È*Î{Ê ÊÊ £ÈÉÓ]Ê£nÉÎ]Ê£{ÉÓ]Ê °ÈÓxÊ °xxäÊ °£ÓxÊ ÎÇÉÈ{Ê £ää
Ê -,n*ÓÊ -ÊEÊ-/Ê £{ÉÓ]Ê£{ÉÎÊÀÊ£ÓÉÓÊ °nÇxÊ °n{äÊ °£ÓxÊ x£ÉÈ{Ê £ää
Ê
9,ÓÊ `ÕÃÌ>LiÊ>`Ê*iÀÃÊvÀÊiÞVÊ-ÌÀ>Ê,iivÊ ÕÃ
}ÃÊÌ
>ÌÊ>ÃÃiLiÊÌÊ
iÃÊÕ«ÊÌÊÇÉn¸Ê>iÌiÀ°
-1/
Ê
Ê 1- - 1/
/,
ÀÊ«ÀÌiVÌ}Ê>`ÊÃÕ>Ì}Ê/"£xÊV>LiÊ«>ÃÃ}ÊÌ
ÀÕ}
Ê«>iðÊÊ -
- "ÊV>ÃÊ
Electrical
LÕÃ
}ÊÃÊ>ÊÃÊ«ÀwiÊLÀÃV>ÌiÊ}>ÃÃÊLÕÃ
}ÊÌ
>ÌÊ>ÞÊLiÊÕÃi`ÊÌÊ«>ÃÃÊ/"ÊV>Li]Ê/"Ê
>`Ê/"ÊVÛiÀÊÜ
iÊÕÃi`ÊÊ`ÀÞÊÀÊ`>«ÊV>ÌðÊÊ7
iÊÕÃi`Ê>ÃÊ>ÊiÊ
ÕÃ}ÊÌÊ>ÞÊLiÊ
ÕÃi`ÊÊÜiÌÊV>ÌðÊÊ
>ÃÊLÕÃ
}ÊÜÊ>VV`>ÌiÊÕ«ÊÌÊ>Ê£xÊiiVÌÀ`i°ÊÊ,iµÕÀiÃÊ
£¸Ê`Ài`Ê
i°ÊÊÎÉ{¸ÊiiVÌÀ`iÊ«i}°ÊÊ1Ê,iV}âi`Ê1,®ÊvÀÊ`ÀÞÊV>Ìð
Catalog Fits Put
Number Description Color pening Length Mfgr. p
1ÓäÊ >âi`Ê*ÀVi>ÊÜÉVÀ}Ê 7
ÌiÊ £ÉÓÊ"Ê ££Én¸Ê ÕÌÊ £ää
1Óä£Ê -«À}ÊvÀÊ1ÓäÊ Ê Ê Ê ÕÌÊ £ää
1ÎäÊ >âi`Ê*ÀVi>ÊÜÉVÀ}Ê 7
ÌiÊ ÎÉ{Ê"Ê £xÉ£È¸Ê ÕÌÊ £ää 1Óä
-£nÊ >ÃÃÊÜÉ-«À}V«ÊEÊ7>Ã
iÀÊ
i>ÀÊ ÎÉ{¸Ê {¸Ê -Ê £ää 7
- 1£ÉÓ 1Îä -
- "
-£n7- ,i«>ViiÌÊ7>Ã
iÀÊvÀÊ-£nÊ ÊÊ Ê Ê -Ê £ää
-£n
* ,i«>ViiÌÊ
«ÊvÀÊ-£nÊ ÊÊ Ê Ê -Ê £ää
-
- "Ê >ÃÃÊÜÉiÌ>ÊiÀÀÕiÊ
i>ÀÊ £¸Ê Ê LÃÊ Óx
-£n
7
- 1£ÉÓÊ 1>âi`Ê*ÀVi>ÊÜÉVÕÌÊ 7
ÌiÊ £ÉÓÊ"Ê Ê 7iÃÌÀÊ £ää
+1
"
/Ê/,"17Ê
Ê -1/",-
ÀÊ«ÀÌiVÌ}Ê>`ÊÃÕ>Ì}Ê/"£xÊV>LiÊ«>ÃÃ}ÊÌ
ÀÕ}
ÊÜ>ðÊÊ >VÊÌ
iÀ«>ÃÌV°ÊÊ,iviÀÊÌÊ
iÝLiÊ
`ÕÌÊÃiVÌÊvÀÊÎÉn¸ÊiÌ>VÊÀiiwi`ÊyiÝ°
Catalog Put
Number Description p
Ê 6£ä£Ê Ó¸Ê+ÕV
iVÌÊ ÕÃ
}Ê £ää +ÕV
iVÌÊ ÕÃ
}
Ê 6£ä£ Ê {¸Ê+ÕV
iVÌÊ ÕÃ
}Ê xä
Ê 6£ä£
Ê È¸Ê+ÕV
iVÌÊ ÕÃ
}Ê xä
Ê 6£ä£Ê n¸Ê+ÕV
iVÌÊ ÕÃ
}Ê xä
Ê 6£ä£
Ê +ÕV
iVÌÊ£ÉÓ¸Ê-«>ViÀÊ £ää £ÉÓ¸Ê-«>ViÀ ÎÉn¸ÊÀiiwi`Ê
Õ«}
Ê 6£ä£Ê +ÕV
iVÌÊÎÉn¸ÊÀiiwi`Ê
Õ«}Ê £ää
/
-/Ê
*-
ÃÕ>ÌÀÃÊÃ`ÊÃi«>À>ÌiÞ°
Ê
>Ì>}Ê ÊÊÊ
«Ê >ÜÊ *ÕÌ
Number Description Length pening p
Ê -
-
ÓÇ 8Ê /iÃÌÊ
«Ê ÓÊÊÇÉ£È¸Ê xÉn¸Ê £ä
Ê -
-
Ó 8Ê ÃÕ>ÌÀÊvÀÊÓÇÊ >VÊ Ê Ê £ä
Ê -
-
Ó, 8Ê ÃÕ>ÌÀÊvÀÊÓÇÊ,i`Ê Ê Ê £ä -
-
ÓÇ -
-
{x
Ê -
-
{x 8Ê *iiÊ7iiÊ/iÃÌÊ
«Ê £ÊÊ£ÉÓ¸Ê xÉ£È¸Ê £ä Shown with Insulator Shown with Insulator
Ê -
-
{Ç 8Ê ÃÕ>ÌÀÊvÀÊ{xÊ >VÊ Ê Ê £ä
Ê -
-
{Ç, 8Ê ÃÕ>ÌÀÊvÀÊ{xÊ,i`Ê Ê Ê £ä
Ê -
-
{n 8Ê }>ÌÀÊ/iÃÌÊ
«Ê Ó¸Ê £ÉÓ¸Ê £ä
Ê -
-
{ 8Ê ÃÕ>ÌÀÊvÀÊ{nÊ >VÊ Ê Ê £ä
Ê -
-
{, 8Ê ÃÕ>ÌÀÊvÀÊ{nÊ,i`Ê Ê Ê £ä
Ê -
-
nx 8Ê
ÀV`iÊ/iÃÌÊ
«Ê ÓÊÊ£Én¸Ê xÉ£È¸Ê £ä
Ê -
-
nÇ 8Ê ÃÕ>ÌÀÊvÀÊnxÊ >VÊ Ê Ê £ä -
-
{n -
-
nx
Ê -
-
nÇ, 8Ê ÃÕ>ÌÀÊvÀÊnxÊ,i`Ê Ê Ê £ä Shown with Insulator Shown with Insulator
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
C-20
Ê/
-
>ÌÕÀ>ÊVÀ°ÊÊ>ÞÊÌ
iÀÊÃâiÃÊ>`ÊVÀÃÊ>ÃÊ>Û>>Li°
Catalog Max. Put
Number Description Color Length Bundle p
Ê
£xÈäÊ *>Êi>`Ê ÞÊ>ÌÕÀiÊ
>LiÊ/iÊ >ÌÕÀ>Ê {¸Ê ÇÉn¸Ê £ää
9" Ê
*-
7Ì
Ê
iÊvÀÊ£äÊÃVÀiÜ°ÊÊ >ÌÕÀ>ÊVÀ°
{äcÊÌÊ£ÇÈcÊ
Catalog Dimensions Put
Number D W E p
Ê /"£Ó£ä{Ê £É{¸Ê ÎÉn¸Ê £ÎÉÎÓ¸Ê £ää
Ê /"£Ó£äxÊ xÉ£È¸Ê ÎÉn¸Ê ÓÉÈ{¸Ê £ää
Ê /"£Ó£äÈÊ ÎÉn¸Ê ÎÉn¸Ê £xÉÎÓ¸Ê £ää
Ê /"£Ó£änÊ £ÉÓ¸Ê ÎÉn¸Ê ÎxÉÈ{¸Ê £ää
Electrical
Ê-1**",/-
1Ãi`ÊÌÊÀÕÊ/"£xÊV>LiÊÊiÊÃÌ>>ÌÃÊ>`Ê«ÀÛ`iÊ>ÊÜÀiÊÃÌ>`vvÊ`ÃÌ>ViÊ
Ê>VVÀ`>ViÊÜÌ
ÊÌ
iÊ >Ì>Ê
iVÌÀVÊ
`iÊ
®°
Catalog Put Weight/100
Number Description Length p (Lbs.)
Ê 7
-
--Ê 7
ÌiÊ*ÀVi>]Ê>V
iÊ-VÀiÜÊÕÌi`Ê ÓÊÊ£ÉÓ¸Ê £ääÊ £Ç
/,
Ê
"
/",Ê "
-]Ê*1-ÊEÊ"1/
/-
Catalog Put
Number Description Color Configuration NEMA Rating Mfgr. p
EAG-84 äcÊ,ÕLLiÀÊ*Õ}Ê >VÊ ÓÊ*i]ÊÓÊ7ÀiÊ ££x*Ê £xÉ£Óx6Ê
>}iÊ Óx
Ê
6xÓÈÈ Ê ÞÊ*Õ}Ê 7
ÌiÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x*Ê £xÉ£Óx6Ê iÛÌÊ £ä
Ê
6xÓÈ Ê ÞÊ
iVÌÀÊ `ÞÊ 7
ÌiÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x,Ê £xÉ£Óx6Ê iÛÌÊ £ä
Ê
6££ÎÊ ,ÕLLiÀÊ*Õ}Ê >VÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x*Ê £xÉ£Óx6Ê iÛÌÊ £ä
Ê
6x£x
,Ê ,ÕLLiÀÊ
iVÌÀÊ `ÞÊ >VÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x,Ê £xÉ£Óx6Ê iÛÌÊ £ä
Ê
6xÎÓä
*Ê Õ«iÝÊ,iVi«Ì>ViÊ(1)Ê ÛÀÞÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x,Ê £xÉ£Óx6Ê iÛÌÊ £ä
1ÓÓÇ Ê *
iVÊ->«Ê"ÕÌiÌÊ >VÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê x£x,Ê £xÉ£Óx6Ê Õ>Ê £ääÉxää
6xÎÈÓÊ Õ«iÝÊ,iVi«Ì>ViÊ(2)Ê ÛÀÞÊ ÓÊ*i]ÊÎÊ7Ài]Ê1ÀÕ`Ê xÓä,Ê ÓäÉ£Óx6Ê iÛÌÊ £ä
EAG-2473 ÀÀi`Ê ÞÊ/ÜÃÌVÊ*Õ}Ê 9iÜÊ ÓÊ*i]ÊÎÊ7Ài]ÊÀÕ`i`Ê x£x*Ê £xÉ£Óx6Ê
>}iÊ £ä
EAG-2493 ÀÀi`Ê ÞÊ/ÜÃÌVÊ `ÞÊ 9iÜÊ ÓÊ*i]ÊÎÊ7Ài]ÊÀÕ`i`Ê x£x,Ê £xÉ£Óx6Ê
>}iÊ £ä
NOTE: (1) *ÕÃ
Ê>`Ê-`iÊ7Ài`°ÊÊ(2)Ê >VÊ>`Ê-`iÊ7Ài`°
6xÓÈÈ
EAG-84
6xÓÈ
6xÎÓä
*
6xÎÈÓ
1ÓÓÇ
6££Î
6x£x
, EAG-2473 EAG-2493
/Ê
" 1/Ê/1 Ê
1//
,
-ÕÌ>LiÊvÀÊVÕÌÌ}Ê
/ÊV`ÕÌÊÌÊ££Én¸Ê"°°ÊÊ"iÊë>ÀiÊVÕÌÌ}ÊÜ
iiÊVÕ`i`°
Catalog
Number Description Mfgr.
Ê */
£äääÊ /ÕL}Ê
ÕÌÌ}Ê/Ê «iÀ>Ê
Ê *Çxä£xÊ ,i«>ViiÌÊ
ÕÌÌiÀÊ7
iiÊ «iÀ>
Electrical
,Ê
" 1/
>Û>âi`ÊÃÌiiÊÜÌ
ÊVÕ«}ÊÊiÊi`°ÊÊ-`ÊLÞÊÌ
iÊvÌÊÊ£ä¿Êi}Ì
ð
Catalog Threads Feet Weight/100 Ft.
Number .D. I.D. Per Inch Per Bundle (Lbs.)
Ê ,£ÉÓÊ °n{äÊ °ÈÓÓÊ £{Ê £ääÊ nä°Î
Ê ,ÎÉ{Ê £°äxäÊ °nÓ{Ê £{Ê xäÊ £äÈ°{
Ê ,£Ê £°Î£xÊ £°ä{Ê ££°xÊ xäÊ £x{°{
,Ê
" 1/Ê **
-
}
Ê+Õ>ÌÞÊUÊ>Û>âi`Ê-Ìii
Catalog Put Weight/100
Number Conduit Size Length p (Lbs.)
Ê *
£ÉÓ8
"Ê £ÉÓÊ £¸Ê ÓxÊ È
Ê *
£ÉÓ8£°xÊ £ÉÓÊ £°x¸Ê ÓxÊ n
Ê *
£ÉÓ8ÓÊ £ÉÓÊ Ó¸Ê ÓxÊ £Ó
Ê *
£ÉÓ8Ó°xÊ £ÉÓÊ Ó°x¸Ê ÓxÊ £x
Ê *
£ÉÓ8ÎÊ £ÉÓÊ Î¸Ê ÓxÊ £
Ê *
£ÉÓ8ΰxÊ £ÉÓÊ Î°x¸Ê ÓxÊ ÓÓ
Ê *
£ÉÓ8{Ê £ÉÓÊ {¸Ê ÓxÊ ÓÈ
Ê *
£ÉÓ8xÊ £ÉÓÊ x¸Ê ÓxÊ ÎÎ
Ê *
£ÉÓ8ÈÊ £ÉÓÊ È¸Ê ÓxÊ {ä
Ê *
£ÉÓ8nÊ £ÉÓÊ n¸Ê ÓxÊ x{
Ê *
ÎÉ{8
"Ê ÎÉ{Ê £¸Ê ÓxÊ
8
Ê
" 1/
Catalog Conduit Min. Bend Put Weight/100 Ft.
Number Size Description Radius p (Lbs.)
8ÎÉnÊ ÎÉnÊ ÕÕÊiÝÊ Ó¸Ê £ää¿Ê Ç°ä
8£ÉÓÊ £ÉÓÊ ÕÕÊiÝÊ Î¸Ê £ää¿Ê °x
8ÎÉ{Ê ÎÉ{Ê ÕÕÊiÝÊ {¸Ê £ää¿Ê £Î°x
-* ÎÉnÊ ÎÉnÊ iÌ>VÊÀiiwi`]Ê£äÊ Ó¸Ê xä¿Ê x°ä
/ÎÉnÊ ÎÉnÊ µÕ`Ê/}
ÌÊiÝÊ {¸Ê £ää¿Ê Ó£°ä
/£ÉÓÊ £ÉÓÊ µÕ`Ê/}
ÌÊiÝÊ È°x¸Ê £ää¿Ê ÓÓ°ä µÕ`Ê/}
ÌÊiÝ ÕÕÊiÝ iÌ>VÊÀiiwi`
1 1Ê
" 1/Ê "
-ÊUÊ
" 1
/-
iÊV>ÃÌÊV««iÀvÀiiÊ>ÕÕ°ÊÊÀÊÕÃiÊÜÌ
ÊÀ}`Ê>`ÊÌiÀi`>ÌiÊV`ÕÌ°
ÛiÀÃÊ>`Ê}>ÃiÌÃÊÃ`ÊÃi«>À>ÌiÞÊiÝVi«ÌÊvÀÊ-/
xääÉx䣰
Catalog Put Weight/100
Number Size Description Mfgr. p (Lbs.)
-/
£ääÊ £ÉÓÊ "ÕÌÊ,}
ÌÊ `ÞÊ -Ìi«
iÃÊ £äÊ Îΰä
-/
£ä£Ê ÎÉ{Ê "ÕÌÊ,}
ÌÊ `ÞÊ -Ìi«
iÃÊ £äÊ {Ç°ä -/
£ää -/
Óää
Electrical
" 1/Ê 1- -
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
ÈÎ£Ê £ÉÓÊ
`Ê ÕÃ
}Ê ÀÉ<VÊ«>Ìi`Ê ,i}>Ê £ääÊ Î°ä
,
ÈÎÓÊ ÎÉ{Ê
`Ê ÕÃ
}Ê ÀÉ<VÊ«>Ìi`Ê ,i}>Ê xäÊ {°ä
,
Î£Ê £ÉÓÊ ÃÕ>Ìi`Ê
`Ê ÕÃ
}Ê *>ÃÌVÊ ,i}>Ê £ääÊ £°ä
,
ÎÓÊ ÎÉ{Ê ÃÕ>Ìi`Ê
`Ê ÕÃ
}Ê *>ÃÌVÊ ,i}>Ê £ääÊ £°ä
`Ê ÕÃ
} ÃÕ>Ìi`Ê
`Ê ÕÃ
} ,i`ÕV}Ê ÕÃ
}
,
n{ä£Ê ÎÉ{ÊÌÊ£ÉÓÊ ,i`ÕV}Ê ÕÃ
}Ê ÀÉ<VÊ«>Ìi`Ê ,i}>Ê £ääÊ {°ä
,
n{äÓÊ £ÊÌÊ£ÉÓÊ ,i`ÕV}Ê ÕÃ
}Ê ÀÉ<VÊ«>Ìi`Ê ,i}>Ê xäÊ £Ó°ä
,
n{äÎÊ £ÊÌÊÎÉ{Ê ,i`ÕV}Ê ÕÃ
}Ê ÀÉ<VÊ«>Ìi`Ê ,i}>Ê xäÊ Ç°ä
/Ê
"
/",-
iVÌÀÃÊ>ÀiÊViiÌÊÌ}
Ì°Ê
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
Èä£Ê £ÉÓÊ
«ÀiÃÃÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê xäÊ x°ä
,
ÈäÓÊ ÎÉ{Ê
«ÀiÃÃÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ {°ä
,
Çä£Ê £ÉÓÊ -iÌÊ-VÀiÜÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê xäÊ È°{
,
ÇäÓÊ ÎÉ{Ê -iÌÊ-VÀiÜÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ £ä°{ ,
銣 ,
Çä£ ,
ÓäÇÓ
,
ÓäÇÓÊ £ÉÓÊ äcÊ
«ÀiÃÃÊ >i>LiÊÀÊ ,>VÊ ÓxÊ £n°£
8Ê
"
/",-
ÌiÃÊÜÌ
ÊÃÕvwÝʸ-/¸Ê>ÀiÊ->«/ÌiÊViVÌÀÃÊ>`Ê`ÊÌÊii`ÊVÕÌðÊÊ"£nnnÉ£nnÊvi>ÌÕÀiÃÊ
>ÊLÕÌÊ}ÀÕ`ÊV>«°ÊÊÃÕ>Ìi`ÊÛiÀÃÃÊ>ÞÊ>ÃÊLiÊ>Û>>Li°
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
ÈÇ£Ê ÎÉnÊ -ÌÀ>}
Ì]Ê-VÀiÜÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ x°Ç
Electrical
,ÎnÊ ÎÉnÊ -ÌÀ>}
Ì]Ê-VÀiÜÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ xäÊ x°Ç ,
ÈÇÓ
În
,
ÈÇÓÊ £ÉÓÊ -ÌÀ>}
Ì]Ê
<Ê"Ê-VÀiÜ®Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ x°x ,În ,În-/
xä
,
ÈÇÎÊ ÎÉ{Ê -ÌÀ>}
Ì]Ê
<Ê"Ê-VÀiÜ®Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ n°Ó
,În-/Ê ÎÉnÊ -ÌÀ>}
Ì]Ê-VÀiÜ]Ê->«/ÌiÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ xäÊ È°ä
,xä-/Ê £ÉÓÊ -ÌÀ>}
Ì]Ê-VÀiÜ]Ê->«/ÌiÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ xäÊ È°ä
,
È{ÎÊ ÎÉnÊ äcÊ
>«Ê/Þ«iÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ °n
,
È{{Ê £ÉÓÊ äcÊ
>«Ê/Þ«iÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ £Î°È ,
È{Î ,
ÈÇÓ
,
È{xÊ ÎÉ{Ê äcÊ
>«Ê/Þ«iÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ ÓÓ°ä
,
ÈÇÓÊ £ÉÓÊ äcÊ
<Ê"Ê-VÀiÜ]Ê>i®Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ £È°ä
ÎnÊ ÎÉnÊ {xcÊ
>«Ê/Þ«iÊ >i>LiÊÀÊ i`iÞÊ xäÊ ££°ä
xäÊ £ÉÓÊ {xcÊ
>«Ê/Þ«iÊ >i>LiÊÀÊ i`iÞÊ ÓxÊ Ó£°ä
"£nnnÊ £ÉÓÊ -VÀiÜÊÜÉÀÕ`Ê
>«Ê iÊ
>ÃÌÊ<VÊ ÊÊ ÓxÊ £°ä "£nnn "£nn
"£nnÊ £ÉÓÊ äcÊ-VÀiÜÊÜÉÀÕ`Ê
>«Ê iÊ
>ÃÌÊ<VÊ Ê ÓxÊ Ó£°n Shown with ground Shown with ground
,
Èx{Ê £ÉÓÊ -iÌÊ-VÀiÜÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ {°Î wire attached. wire attached.
+1Ê//Ê
8Ê
"
/",-
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
Î{äÓÊ £ÉÓÊ -ÌÀ>}
ÌÊ >i>LiÊÀÊ ,>VÊ ÓxÊ £Ç°ä
,
Î{äÎÊ ÎÉ{Ê -ÌÀ>}
ÌÊ >i>LiÊÀÊ ,>VÊ ÓxÊ Óä°{
,
Î{äÓ ,
Î{ÓÓ
,
Î{Ó£Ê ÎÉnÊ äcÊ >i>LiÊÀÊ ,>VÊ ÓxÊ ÓÓ°n
,
Î{ÓÓÊ £ÉÓÊ äcÊ >i>LiÊÀÊ ,>VÊ ÓxÊ Óΰ{
,
Î{ÓÎÊ ÎÉ{Ê äcÊ >i>LiÊÀÊ ,>VÊ £äÊ ÎÈ°
,/ÎnÊ ÎÉnÊ -ÌÀ>}
ÌÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ ÓxÊ £{°ä
,/xäÊ £ÉÓÊ -ÌÀ>}
ÌÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ ÓxÊ £Ç°n ,/xä ,äxä
,äxäÊ £ÉÓÊ äcÊ iÊ
>ÃÌÊ<VÊ À}ÌÊ £äÊ Ón°x
"
/",Ê",Ê,"
8ÊEÊ
",-
/Ê
Catalog Put Weight/100
Number Size Made of Mfgr. p (Lbs.)
,
ÈÈÓÎÊ ÎÉnÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ x
,Ê
"1* -
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
*
,
£ÉÓÊ £ÉÓÊ /
Ài>`i`Ê,}`,}`Ê >Û°Ê-ÌiiÊ *V>Ê £ääÊ £{
*
,
ÎÉ{Ê ÎÉ{Ê /
Ài>`i`Ê,}`,}`Ê >Û°Ê-ÌiiÊ *V>Ê £ääÊ Óä
Electrical
,
£nÓÓÊ £ÉÓÊ /
Ài>`iÃÃÊ,}`,}`Ê >°ÊÀÊ ,>VÊ ÓxÊ ÓÈ
,
£nÓÎÊ ÎÉ{Ê /
Ài>`iÃÃÊ,}`,}`Ê >°ÊÀÊ ,>VÊ ÓxÊ {Ó
*
,
£ÉÓ ,
£nÓÓ /
*£ä£
/
*£ä£Ê £ÉÓÊ -
ÀÌÊ/
Ài>`i`Ê,}`,}`Ê >Û°Ê-ÌiiÊ ÊÊ £ääÊ {°n
8Ê
"1* -
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
ÈÇÈÊ £ÉÓÊ -VÀiÜÊiÝiÝÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ {°x
,
ÈÇÇÊ ÎÉ{Ê -VÀiÜÊiÝiÝÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ È°ä
" 1/Ê **
-
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
,
Ç£Ê £ÉÓÊ
>ÃiÊ ««iÊ£ÉÓ¸Ê}Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ Î°Ó
,
£Ç£Ê £ÉÓÊ
>ÃiÊ ««iÊ£¸Ê}Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ x°£
,
ÇÓÊ ÎÉ{Ê
>ÃiÊ ««iÊ£ÉÓ¸Ê}Ê iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ x°£
,
Ç£ ,
£Ç£ ,
ÈÈ£
,
ÈÈ£Ê £ÉÓÊ "vvÃiÌÊ ««iÊÎÉ{¸Ê"vvÃiÌÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê ÓxÊ £Ó°n
" 1/Ê"
1/-
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
Ê -/
£ÎÓÊ £ÉÓÊ VÕÌÊ -Ìii]Ê<VÊ*>Ìi`Ê °Ê-Ìi«
iÃÊ £ääÊ £
Ê -/
£ÎÎÊ ÎÉ{Ê VÕÌÊ -Ìii]Ê<VÊ*>Ìi`Ê °Ê-Ìi«
iÃÊ £ääÊ Ó
"7-
Catalog Made Put Weight/100
Number Size Description of Mfgr. p (Lbs.)
Ê,
ÓÈxÓÊ £ÉÓÊ *ÕÊ
ÀiÀÊ
LÜÊ iÊ
>ÃÌÊ<VÊ ,i}>Ê £ääÊ ÓÇ
" 1/Ê-/,*-
Catalog Made Put Weight/100
Number Size Description of p (Lbs.)
Ê ,
ÓänÓÊ £ÉÓÊ "iÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ Ó°Ç
Ê ,
ÓänÎÊ ÎÉ{Ê "iÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ xäÊ Ó°n
Electrical
Ê ,
Óän{Ê £Ê "iÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ xäÊ Ç°Ç
Ê ,
ÓäÓÊ £ÉÓÊ /ÜÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ ÓääÊ Ó°Î
Ê ,
ÓäÎÊ ÎÉ{Ê /ÜÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ Î°ä
Ê ,
Óä{Ê £Ê /ÜÊiÊ
/Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ x°Ç
Ê ,
£ÎÎÓÊ £ÉÓÊ "iÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ {°{ "iÊiÊ
/É,}`Ê /ÜÊiÊ
/É,}`Ê
Ê ,
£ÎÎÎÊ ÎÉ{Ê "iÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ x°n -ÌÀ>« -ÌÀ>«
Ê ,
£ÎÎ{Ê £Ê "iÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ xäÊ Ç°£
Ê ,
ÓÓÎÓÊ £ÉÓÊ /ÜÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ ÓääÊ £°
Ê ,
ÓÓÎÎÊ ÎÉ{Ê /ÜÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ ÓääÊ Ó°n
Ê ,
ÓÓÎ{Ê £Ê /ÜÊiÊ,}`Ê-ÌÀ>«Ê -ÌiiÊ £ääÊ Î°È
1
/-
-i>ÃÊ>ÀÕ`ÊÕVÌÊLÝiÃ]Êy>Ã
}ÃÊ>`ÊVÕÌiÃÃÊÌ
iÀÊ>««V>ÌðÊÊ
>ÃÞÊvÀÃÊ>ÀÕ`Ê
ÀÀi}Õ>ÀÊÃÕÀv>ViÃÊ>`ÊVw}ÕÀ>ÌðÊÊ
ÕÌÃÊ>`ÊÌÀÃÊi>ÃÞ°ÊÊ}
ÞÊÀiÃÃÌ>ÌÊÌÊVÀ>V}]Ê`ÀÞ}Ê
>`ÊÃ
À}°ÊÊÀ>ÞÊÊVÀ]ÊV>ÊLiÊ«>Ìi`Êi`>ÌiÞÊ>vÌiÀÊ>««V>Ì°
Catalog Put
Number Description p
Ê 1
/-
£Ê -i>}Ê
«Õ`Ê £ÊL°Ê-Õ}
Ê 1
/-
xÊ -i>}Ê
«Õ`Ê xÊL°Ê-Õ}
,"1 Ê
6
-
Catalog Trade Wire Put Weight/100
Number Size Description se Mfgr. p (Lbs.)
,
ÇxÊ ÊÊ ÀÕ`}Ê
«]ÊÀiiÊ £ÓÊÊ£{Ê ,>VÊ xäÊ £°ä
,
n££Ê £ÉÓÊÌÊ££É{ÊÊÀÕ`}Ê
>«Ê >ÀiÊ
««iÀÊ ,i}>Ê ÓäÊ Î°x
/"£££ä{Ê(1) £äÎÓ8ÎÉnÊ ÀÕ`}Ê-VÀiÜ]ÊÀiiÊ(2)Ê Ê /E Ê £ääÊ Ê
,
Çx /"£££ä{
NOTE: (1)
Ê ÌÊ1°°ÊÃÌi`° (2)
Ê/>«ÃÊÌÃÊÜÊÌ
Ài>`ð ,
n££
-"
",-
/-
7Ì
Ê`i`Ê«Õ}Êi`°ÊÊ"Ì
iÀÊÛ>ÀiÌiÃÊ>ÃÊ>Û>>Li°
iwÌÃ\
-*/£\Ê ÊÌ
iÀ«>ÃÌV]Ê«>À>i>ViÌi`]ÊÌÜV`ÕVÌÀÊ}
ÌÊ`ÕÌÞÊVÀ`ÊvÀÊ«i`>ÌÊÀÊ«ÀÌ>LiÊÕÃiÊÊ`>«ÊV>ÌðÊÎää6ÉÈäc
°
-/\Ê ÕÀÊ
>À`ÊÃiÀÛViÊÌ
iÀ«>ÃÌVÊÀÊ«>ÃÌVÊ>ViÌÊÎää6É£äxc
°
Catalog Put
Number Type Conductors Length Color Rating Mfgr. p
,ä{xÈÊ -*/£Ê £nÉÓÊ È¿Ê 7
ÌiÊ Îää6ÉÈäc
Ê
>ÀÊ £ää -*/£
*Ê/-
«Ê}
ÌÃÊ>ÀiÊÛ>LiÊÜÊÛÌ>}iÊÃViÌÃÊ>`ÊLÕLÃÊ`iÃ}i`ÊÌÊLiÊë>Vi`Ê>ÃÊ`iÃÀi`ÊÊ
7£ä£Ê£nÉÓÊ-*/£ÊVÀ`°ÊÊÊ>ÝÕÊvÊ££äÊÓ{6ÊLÕLÃÊ>ÞÊLiÊÕÃi`Ê«iÀÊÃ}iÊ£nÉÓÊ-*/£Ê
VÀVÕÌ°ÊÊ1ÃiÊ>ÊÓ{ÊÛÌÊÃÌi«`ÜÊÌÀ>ÃvÀiÀÊvÀÊÌ
iÊ«ÜiÀÊÃÕ««Þ]Ê>Ü}Ê£°£ÊÜ>ÌÌÊÕÌ«ÕÌÊV>«>VÌÞÊ
«iÀÊLÕL°ÊÊ
Ý>«i\ÊÊÊÓxä7ÊÌÀ>ÃvÀiÀÊÜÊ«ÜiÀÊÓÓxÊLÕLðÊÊ/
iÊÃ>«ÊÕÌ}ÊÀ}ÊëÃÊÛiÀÊ
Ì
iÊL>ÀÀiÊvÊÌ
iÊÃViÌÊ>`ÊÜÊÃiVÕÀiÊÌÊÌÊÌ
Ê«>iðÊÊ>ÞÊÌ
iÀÊ>VViÃÃÀiÃÊ>ÃÊ>Û>>Li°
Catalog Put
Number Description p
Ê
Ó{ääÊ -ViÌÊ>`ÊÓ{ÊÛÌÊVi>ÀÊLÕLÊ £ääÉ£]äää
Ê
,,Ê ->«ÊÕÌ}ÊÀ}Ê £ääÉ£]äää
Ó{ää
,,
-
/Ê
,-
"Ì
iÀÊÛ>À>ÌÃÊ>`ÊLÀ>`ÃÊ>ÃÊ>Û>>Li°
Electrical
Catalog Put
Number Description Rating Color p
6ÈÈääÊ ,Ì>ÀÞ]Ê-*]ÊÜÌ
Ê*ÕÃ
Ê-ÜÌV
Ê Èää7É£Óä6Ê ÛÀÞÊLÊ £
6È£xääÊ ,Ì>ÀÞ]Ê-*Ê £xää7É£Óä6Ê ÛÀÞÊLÊ Ó
,"
ÓäÊ ,Ì>ÀÞ]Ê-*Ê ÓäÉ£Óä6Ê Ê £
,"
7Ê 7>ÛiÊiÀÊ(1)Ê £äÉ£Óä6Ê Ê £
6È£xää
6ÈÈää
NOTE: (1)Êi>ÀÞÊÛiÃÊÌ
iÊ}
ÌÊvÀÊ}ÜÊÌÊvÕÊ}ÜÊÊ£äÊÌÊÓäÊÃiV`ÃÊ`i«i`}ÊÊVÞViÊÃiÌÌ}°
ÊÊÊÊÊÊÊÊÊÊÊÊÊÃÊ
>ÃÊ>ÕÌÉ>Õ>ÊÃiiVÌÊÃÜÌV
°
,"
Óä ,"
7
" Ê
,-
ÌÊvÀÊÕÃiÊÜÌ
Ê}
Ê*ÜiÀÊ>VÌÀÊ*®ÊÌÀ>ÃvÀiÀð
ÛiÀÃwi`Ê `iÀÃÊ
>ÛiÊ LÕÌÊ À>`Ê ÌiÀviÀiViÊ wÌiÀÃÊ >`Ê «ÕÃ
Ê vvÊ ÃÜÌV
iÃ°Ê Ê Û`Ê
Õ`iÀ>`}°
Ê`iÀÊV>Ê`ÊÃiÛiÀ>ÊÌÀ>ÃvÀiÀÃÊÃÊ}Ê>ÃÊÌ
iÊ`iÀÊÀ>Ì}ÊÃÊÌÊiÝVii`i`ÊLÕÌÊÌÊ>ÞÊ
ÌÊLiÊivviVÌÛiÊÜÌ
ÊÌÀ>ÃvÀiÀÃÊÀ>Ìi`ÊiÃÃÊÌ
>Êx]äääÊÛÌðÊi`ÊÌÀÊi>LiÃÊÌ
iÊÕÃiÀÊÌÊÃiÌÊ
Ì
iÊÜÊvÊÌ
iÊ`}ÊÀ>}i°
Catalog Put
Number Description Mounting Rating Trim Mfgr. p
6
xÊ(1) ,Ì>ÀÞÊ £Ê>}Ê x°ÓÉ£Óä6Ê i`Ê`ÕÃÌÊ ÛiÀÃwi`Ê £
6
x*Ê ,Ì>ÀÞ]Ê*Õ}Ê *Õ}Ê {°ÓÉ£Óä6Ê iÊ ÛiÀÃwi`Ê £
6
£ä ,Ì>ÀÞÊ £Ê>}Ê n°{É£Óä6Ê i`Ê`ÕÃÌÊ ÛiÀÃwi`Ê £
6
£xÊ ,Ì>ÀÞÊ ÓÊ>}Ê £Ó°xÉ£Óä6Ê i`Ê`ÕÃÌÊ ÛiÀÃwi`Ê £
,"
ÓäÊ ,Ì>ÀÞÊ 1ÛiÀÃ>Ê ÓäÉ£Óä6Ê i`Ê`ÕÃÌÊ ,VÝÊ £ 6
x* ,"
Óä
NOTE: (1)
Ê-ÌÀ>«ÕÌ°ÊÊ7>«>ÌiÊÌÊVÕ`i`°
/
,-Ê",Ê /
,
,
iÊÃ}ÃÊV>ÊV>ÕÃiÊÌiÀviÀiViÊÊÌÜÊÜ>ÞðÊ-}ÃÊV>ÊÀ>`>ÌiÊiiVÌÀ>}iÌVÊiiÀ}ÞÊ
Ü
V
ÊÌ
iÊÀiViÛiÀÊ«VÃÊÕ«Ê>ÃÊÕÜ>Ìi`ÊÃ}>°ÊÊ-}ÃÊV>Ê>ÃÊ«ÕÌÊiiVÌÀV>ÊÌiÀviÀiViÊL>VÊ
ÌÊÌ
iÊiÊÜ
V
Ê>ÃÊ«ÜiÀÃÊÌ
iÊÀiViÛiÀ°ÊÊvÊÌ
iÊÀ>`>Ìi`ÊÌÞ«iÊvÊÌiÀviÀiViÊViÃÊ`ÀiVÌÞÊ
vÀÊÌ
iÊ
}
ÊÛÌ>}iÊV«iÌÃÊvÊÌ
iÊÃ}]ÊÌÌiÊV>ÊLiÊ`iÊÌÊi>ÌiÊÌ°ÊÊÜiÛiÀ]Ê
vÊÌ
iÊÀ>`>Ìi`ÊÌiÀviÀiViÊÃÊV>ÕÃi`ÊLÞÊy>Ã
}ÊÀÊ>>Ì}ÊÌ
iÊÃiVÊ`>ÀÞÊÛÌ>}iÊvÊÌ
iÊ
ÌÀ>ÃvÀiÀ]ÊÌ
iÊÇnÇxÊ
}
ÊÌiÃÊV
iÊÜÊvÌiÊÃÕ««ÀiÃÃÊÌ
>ÌÊÌiÀviÀiVi°ÊvÊÌ
iÊ
ÌiÀviÀiViÊÃÊLi}Êvi`ÊL>VÊÌÊÌ
iÊi]ÊÌ
iÊÇnä{ÊV>«>VÌÀÊ>`ÊÌ
iÊÇnÓxÊ>ÀiÊ
vÌiÊivviVÌÛi°
Catalog Put
Number Description Mfgr. p
Ê Çnä{Ê
>«>VÌÀ]ÊÓÉÓÓä6Ê °7°ÊiÀÊ £
Ê ÇnÇxÊ }
Ê6Ì>}iÊ
iÊÊ£x]äää6É£ää>Ê °7°ÊiÀÊ £
Ê ÇnÓxÊ ÓÊi>V
ÊÜ`}®ÊÕ>ÊiÊ
iÊ °7°ÊiÀÊ £
Çnä{ ÇnÇx
Ê ÇnÓÈÊ xÊ-}iÊiÊ
iÊ °7°ÊiÀÊ £
ÜÊ/iÃÊ iÊÌiÀÊ
ÀVÕÌ }
Ê/iÃÊ iÊÌiÀÊ
ÀVÕÌÃ
Electrical
-
£ÇÓ££9Ê -
£ÇÓÊ "iÊÇÓ/£ÓÊ -Ê ÇÓÊ nÊ Ê iiÀ>Ê*ÕÀ«ÃiÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
ÓÇÓ£Ó9Ê -
ÓÇÓÊ /ÜÊÇÓ/£ÓÊ -Ê ÇÓÊ {Ê Ê iiÀ>Ê*ÕÀ«ÃiÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
£È££9Ê -
£ÈÊ "iÊÈ/£ÓÊ -Ê ÈÊ nÊ Ê iiÀ>Ê*ÕÀ«ÃiÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
ÓÈ£Ó9Ê -
ÓÈ
- Ê /ÜÊÈ/£ÓÊ -Ê ÈÊ {Ê
iÀ}ÞÊ->ÛiÀÊ iiÀ>Ê*ÕÀ«ÃiÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
ÓÈä£ Ó9Ê(1)Ê -
Ó{n"Ê /ÜÊ{n/£Ó"Ê "Ê {nÊ xÊ Ê *ÀiÕÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
£nx£ £9Ê(1)Ê -
£ÇÓ"Ê "iÊÇÓ/£Ó"Ê "Ê ÇÓÊ ÈÊ Ê *ÀiÕÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
Ónx£ Ó9Ê(1)Ê -
ÓÇÓ"Ê /ÜÊÇÓ/£Ó"Ê "Ê ÇÓÊ ÇÊ Ê *ÀiÕÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
£x£ £9Ê(1)Ê -
£È"Ê "iÊÈ/£Ó"Ê "Ê ÈÊ ÈÊ Ê *ÀiÕÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
-
Óx£ Ó9Ê(1)Ê -
ÓÈ"Ê /ÜÊÈ/£Ó"Ê "Ê ÈÊ ÇÊ Ê *ÀiÕÊ
ÀiÃViÌÊ 1Ê>«ÊV>Ì
NOTE: (1)
ÊÌÊyÕÃ
ÊÕÌÊ"ÊÕÌðÊÊ"ÊÕÌÃÊÃ
Õ`ÊLiÊÃÕëi`i`Ê>ÊÕÊvÊ££ÉÓ¸ÊvÀÊÃÕÀv>Vi°
}°ÊÎ
}°Ê£ }°ÊÓ
}°Ê{
}°Ê }°Ê£ä
7,*,"1 Ê8/1,
-
,>«`Ê-Ì>ÀÌÊUÊ-i
£Óä6ÊUÊÈäâ
Catalog Lamp Length Ballast
Number Type Circuit (Inches) Fig. Note Mfgr. Approval
/ÓÎ{£xÓ9Ê /ÜÊ{ä/£ÓÊ ,-Ê {nÊ ££Ê
iÀ}ÞÊ->ÛiÀÊ
ÀiÃViÌÊ 1
/{Î{£xn9Ê ÕÀÊ{ä/£ÓÊ ,-Ê {nÊ £ÎÊ
iÀ}ÞÊ->ÛiÀÊ(1)Ê
ÀiÃViÌÊ 1
/ÓÈ£Ó9Ê /ÜÊÈ/£ÓÊ -Ê ÈÊ £ÓÊ
iÀ}ÞÊ->ÛiÀÊ
ÀiÃViÌÊ 1
/Ó{ä
Ê ,i«>ViiÌÊVÀÞVÊiÃÊvÀÊ /Ó{äÊÝÌÕÀiÊ Ê Ê
ÀiÃViÌ
/{{ä
Ê ,i«>ViiÌÊVÀÞVÊiÃÊvÀÊ /{{äÊÝÌÕÀiÊ Ê Ê
ÀiÃViÌ
NOTE: (1)
Ê1ÃiÃÊ/Ü]ÊÓÊ>«Ê >>ÃÌð
Electrical
}°Ê£{ }°Ê£x
,
--
Ê1",
-
/Ê8/1,
-
*ÀiÕÊ}À`ÊÌÀvviÀ°ÊÊÕÃ
ÊÜ
ÌiÊÃÌiiÊÜÌ
ÊLÕÌÊÃiÃVÊÌ>Lð
-Ì>`>À`ÊiÃÊÃÊ>VÀÞVÊ«>ÌÌiÀÊ£ÓÊ>ÃÊÃ
ÜÊLiÜ°ÊÊ"Ì
iÀÊ«>ÌÌiÀÃÊ>Û>>Li°
£Óä6ÊUÊÈäâ
Catalog Lamp Nominal Ballast
Number Type Circuit Length Fig. Note Mfgr. Approval
£{*Ó{ä£Ó
-Ê /ÜÊ{ä/£ÓÊ ,-Ê £¿Ý{¿Ê £ÈÊ
iÀ}ÞÊ->ÛiÀÊ
ÀiÃViÌÊ 1
ÓÓ*{Óä£ÓÊ ÕÀÊÓä/£ÓÊ /-Ê Ó¿ÝÓ¿Ê £ÇÊ Ê
ÀiÃViÌÊ 1
Ó{*Î{"£Ó
-Ê /
ÀiiÊ{ä/£ÓÊ ,-Ê Ó¿Ý{¿Ê £ÇÊ
iÀ}ÞÊ->ÛiÀÊ
ÀiÃViÌÊ 1
Ó{*{{ä£Ó
-Ê ÕÀÊ{ä/£ÓÊ ,-Ê Ó¿Ý{¿Ê £ÇÊ
iÀ}ÞÊ->ÛiÀÊ
ÀiÃViÌÊ 1
Ó{*Î{ä£Ó-"Ê /
ÀiiÊ"ÎÓ/nÊ ,-Ê Ó¿Ý{¿Ê £ÇÊ
iÀ}ÞÊ->ÛiÀ (1)Ê
ÀiÃViÌÊ 1
Ó{*{Î{-xnÊ ÕÀÊä{äÊ ,-Ê Ó¿Ý{¿Ê £ÇÊ
iÀ}ÞÊ->ÛiÀ (1)Ê
ÀiÃViÌÊ 1
NOTE: (1)
iVÌÀVÊiiÀ}ÞÊÃ>Û}ÊL>>ÃÌ°
- ÊEÊ
Ê8/1,
-Ê7/Ê /
,Ê -/
ÀÊÃ}]Êv>V>`iÊÀÊLÕ`}Ê}
Ì}Ê>`ÊëiV>Ê>««V>ÌÃÊÀiµÕÀ}Ê>ÊÜi>Ì
iÀ«ÀvÊ
wÝÌÕÀiÊÜÌ
Ê>ÊÌi}À>ÊL>>ÃÌ°ÊÊ/
iÃiÊÜi>Ì
iÀ«ÀvÊwÝÌÕÀiÃÊ>ÀiÊiµÕ««i`ÊÜÌ
Ê
vÕÞÊ}>ÃiÌi`ÊiÃÊ>`ÊViÊ>ÃÃiLi`°Ê£ÓäÊÛÌ°
Catalog Lamp verall Length
Number Type (Inches)
-£{Ê "iÊ{n/£ÓÊ"ÊÀÊ6"Ê x{
£{nääÊ "iÊ{n/£ÓÉ"Ê x{£Én
£ÈnääÊ "iÊÇÓ/£ÓÉ"Ê Çn£Én
£nnääÊ "iÊÈ/£ÓÉ"Ê £äÓ£Én 8
"8Ê ÕVÌÊLÝÊvÀÊ}Ê ÊwÝÌÕÀiÃÊ
-/"
"Ê+1,/<Ê/Ê""Ê8/1,
-
ÀÊ >««V>ÌÃÊ ÀiµÕÀ}Ê ÌÀÕiÊ VÀÊ Ài`ÌÊ VÕ`}Ê LL>À`Ê }
Ì}]Ê
ëÀÌÃÊwi`Ã]ÊÌi«À>ÀÞÊ}
Ì}Ê>`ÊÃ>viÌÞÊ}
Ì}°ÊÊ£ÉÓ¸Ê *-ÊÌ
Ài>`i`Ê
>ÀÊÕÌ}°ÊÊÃ
i`ÊÊ`>ÀÊLÀâi°
Catalog Lamp Lamp
Number Description Watts Type Included
Ê -/"
+8xääÊ
VÞÊÝÌÕÀiÊ xääÊ xää/Î+Ê 9iÃ
-/"+x£x
Ê -/"+x£xÊ +Õ>ÌÞÊÝÌÕÀiÊ xääÊ xää/Î+Ê 9ià -/"
+8xää
Ê -/"
+8£xääÊ
VÞÊÝÌÕÀiÊ £]äääÉ£]xääÊ £äääÉ£xää/Î+Ê
-/"
+8£xää
Electrical
}°Ê£ }°ÊÓ
-/"
"Ê8Ê""Ê8/1,
-
ÀÊÃiVÕÀÌÞ]ÊÀ>`Ü>Þ]Ê>VViÌ]ÊÀiVÀi>Ì>Ê>`ÊÃ}Ê}
Ì}°ÊÊÕÕÊ
ÕÃ}ÊwÃ
i`ÊLÀâi°ÊÊiÃÊvÀ>iÊÃÊvÕÞÊ}>ÃiÌi`Ê
>`Ê
}i`ÊÌÊL`Þ°ÊÊ/i«iÀi`Ê}>ÃÃÊiðÊÊLÛiÊ>`ÊLiÜÊ
ÀâÌ>Ê>}°ÊÊi>ÛÞÊ`ÕÌÞÊÃÌiiÊÌÀÕÊvÀÊÕÃiÊÜÌ
Ê£ÉÓ¸ÊÀÊ
ÎÉ{¸ÊLÌðÊÊ-Õ««i`ÊÜÌ
ÊÕÌÌ>«Ê£Óä6ÉÓän6ÉÓ{ä6ÉÓÇÇ6ÊL>>ÃÌ°ÊÊ{nä6ÊL>>ÃÌÊ>ÃÊ>Û>>Li°
>«ÊÌÊVÕ`i`°
Catalog Lamp Weight
Number Watts Type Base Ballast Fig. (Lbs.)
Ê}
Ê*ÀiÃÃÕÀiÊ-`Õ
-/"-Óxä8Ê ÓxäÊ /ÓnÉ
£nÊ }ÕÊ
7Ê ÎÊ {Î
-/"-{ää8Ê {ääÊ /ÓnÉ
£nÊ }ÕÊ
7Ê ÎÊ {n
iÌ>Ê>`i
-/"-£ÇxÊ £ÇxÊ
É /ÓnÊ }ÕÊ
7Ê ÎÊ ÓÎ
-/"-ÓxäÊ ÓxäÊ
É /ÓnÊ }ÕÊ
7Ê ÎÊ Îx
-/"-{ää (1) {ääÊ /£nÉ
ÓnÊ }ÕÊ
7Ê ÎÊ {È
>VÌÀÞÊÃÌ>i`Ê"«ÌÃ
- iÊÕÃ}ÊvÀÊ£Óä6Ê>`ÊÓÇÇ6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°Ê
Ê - iÊÕÃ}ÊvÀÊÓän6]ÊÓ{ä6Ê>`Ê{nä6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°
Ê /,É*
Ê /ÜÃÌVÊ*
ÌVÌÀ
i`ÊÃÌ>i`ÊVViÃÃÀiÃ
-/"*£äxÊ Ê ÕÌÌÊ*
ÌVÌÀÊvÀÊÕÌ>ÌVÊÕÃÌ>ÜÊ}
Ì}ÊvÀÊ£Óä6®°
-/"*£äxÊ ÕÌÌÊ*
ÌVÌÀÊvÀÊÕÌ>ÌVÊÕÃÌ>ÜÊ}
Ì}ÊvÀÊÓän6]ÊÓ{ä6ÊÀÊÓÇÇ6®°
-/"1-£äÊ `>«ÌiÀÊvÀÊÓ¸Ê/iÊÕÌ}°
NOTE: (1)
Ê>«ÊVÕ`i`°
}°ÊÎ
Ê -/"1-£ä
/iÊÕÌÊ`>«ÌiÀ
>VÌÀÞÊÃÌ>i`Ê"«ÌÃ
- iÊÕÃ}ÊvÀÊ£Óä6Ê>`ÊÓÇÇ6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°Ê
Ê - iÊÕÃ}ÊvÀÊÓän6]ÊÓ{ä6Ê>`Ê{nä6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°
Ê /,É-
Ê *
ÌVÌÀÊ,iVi«Ì>ViÊ>`Ê-
ÀÌ}Ê
>«°
/,É*
Ê *
ÌVÌÀÊ>`Ê,iVi«Ì>Vi°
* *9
i`ÊÃÌ>i`ÊVViÃÃÀià ÀÊÕÌ 9iÊÕÌ
-/"
££xÓÊ
i>ÀÊ*ÞV>ÀL>ÌiÊ6ÃÀÊ-
i`ðÊ-«>Vi`ÊvÀÊÀÊÜ°
-/"
££x£Ê >VÊÕÕÊ>ÀiÊ-
i`ðÊÕÀÊ-`iÃÊ>ÌÌi°
NOTE: (1)
Ê1ÃiÊÜÌ
Ê-/"
£ÓÊÜ>ÊLÀ>ViÌ°
*7
7>ÊÕÌ
Ê >ÀiÊ-
i`
Four segments for full or partial shading
-/"
£Ó
-/"
"Ê9/
*,"Ê7Ê"1 /
Ê1 ,
-
ÀÊ>VViÌ]ÊÃiVÕÀÌÞ]Ê>Ài>Ê>`Ê«iÀiÌiÀÊ}
Ì}°ÊÊiV>ÃÌÊ>ÕÕÊÕÌ}ÊLÝÊVÌ>ÃÊvÕÀÊ£ÉÓ¸Ê *-Ê
Ì>««i`Ê
iÃÊvÀÊÜÀ}Ê>`ÉÀÊÃÌ>>ÌÊvÊ«
ÌVÌÀ°ÊÊ
«iÌÊVÛiÀÊÃÊ«>VÌÊÀiÃÃÌ>ÌÊ«ÞV>ÀL>ÌiÊ
Ê>Ê`>ÀÊLÀâiÊwÃ
°ÊÊ,iyiVÌÀÉiÃÊÃÊVÃÌÀÕVÌi`ÊvÊiVÌÊ`i`Ê
}
Ê«>VÌÊ>VÀÞV°ÊÊ,iyiVÌÀÊÃÞÃÌiÊÃÊ
Þ`ÀvÀi`Ê>`âi`Ê>ÕÕ°ÊÊ
ÝÌiÀÀÊ
>À`Ü>ÀiÊÃÊÃÌ>iÃÃÊÃÌii°ÊÊ
i>ÀÊi`ÕÊL>ÃiÊ>«ÊVÕ`i`°
Catalog Lamp Weight
Number Watts Type olts Ballast Fig. (Lbs.)
}
Ê*ÀiÃÃÕÀiÊ-`Õ
-/"*-,Çä8Ê ÇäÊ
É £ÇÊ £ÓäÓÇÇÊ 8*Ê {Ê £ä
-/"*,£xä8Ê £xäÊ
É £ÇÊ £ÓäÓÇÇÊ 8*Ê xÊ £Ó
-/"*,Óxä8Ê ÓxäÊ
£nÊ £Óä{näÊ
7Ê*®Ê ÈÊ £
iÌ>Ê>`i
-/"*-,ÇäÊ ÇäÊ
É £ÇÊ £ÓäÓÇÇÊ 8*Ê {Ê £ä }°Ê{ }°Êx
-/"*,£xäÊ £xäÊ
É£ÇÊ £ÓäÓÇÇÊ
7Ê xÊ £Ó
-/"*,£ÇxÊ £ÇxÊ
É£ÇÊ £ÓäÓÇÇÊ
7Ê xÊ £Ó
-/"*,ÓxäÊ ÓxäÊ /ÓnÊ £Óä{näÊ
7Ê*®Ê ÈÊ £
i`ÊÃÌ>i`ÊVViÃÃÀiÃ
-/"*£äxÊ Ê ÕÌÌÊ*
ÌVÌÀÊvÀÊÕÌ>ÌVÊÕÃÌ>ÜÊ}
Ì}ÊvÀÊ£Óä6®°
-/"*£äxÊ Ê ÕÌÌÊ*
ÌVÌÀÊvÀÊÕÌ>ÌVÊÕÃÌ>ÜÊ}
Ì}ÊvÀÊÓÇÇ6®°
}°ÊÈ
-/"*/*Ê Ê/>«iÀ«ÀvÊÌÊÊÓÊiÊ-VÀiÜÃÊÌÊ*ÀiÛiÌÊVViÃÃÊLÞÊÌÀÕ`iÀð
Electrical
-/"
"Ê/7/
,Ê
"*9Ê/-
ÀÊÃiVÕÀÌÞÊ>`ÊÃ>viÌÞÊ}
Ì}ÊÕ`iÀÊV>«iÃ]Êi>ÛiÃ]ÊiVÃi`ÊiÌÀ>ViÊÜ>ÞÃÊÀÊ>}ÊVÛiÀi`Ê
Ü>Ü>ÞðÊÊ*ÞV>ÀL>ÌiÊ
ÕÃ}ÊwÃ
i`ÊÊ>ÀV
ÌiVÌÕÀ>Ê`>ÀÊLÀâi°ÊÊ
>«ÊVÕ`i`°
Catalog Lamp Weight
Number Watts Type Base Ballast olts (Lbs.)
Ê}
Ê*ÀiÃÃÕÀiÊ-`Õ
-/"/
xä 8Ê xäÊ
£ÇÊ i`ÕÊ ,i>VÌÀÊ *®Ê £ÓäÊ È
-/"/
Çä 8Ê ÇäÊ
£ÇÊ i`ÕÊ ,i>VÌÀÊ *®Ê £ÓäÊ È
«>VÌÊÕÀiÃViÌ
-/"/
Ón Ê ÓnÊ *
Ê 8ÎÓ`ÎÊ ,i>VÌÀÊ *®Ê £ÓäÊ x
-/"
"Ê- /1,
Ê
"*9Ê/-
ÀÊÕÌ`ÀÊV>«ÞÊ>`ÊÃvwÌÊ}
Ì}ÊÜÌ
ÊÕÌ}Ê
i}
ÌÃÊvÊ£äÊÌÊÓäÊviiÌÊ
ÃÕV
Ê>ÃÊ}>ÃiÊÃ>`ÃÊ>`Ê`ÀÛiÌ
ÀÕ}
ðÊÊÕÃ}ÊÃÊvÀi`Ê>ÕÕÊwÃ
i`Ê
ÜÌ
ÊÕÀ>«iÝÊÊ«ÞiÃÌiÀÊ«Ü`iÀÊV>Ì°ÊÊÕÕÊiÃÊvÀ>iÊÕÃiÃÊ>ÊvÀ«>ViÊ
}>ÃiÌÊvÀÊ>ÊV«iÌiÊÃi>ÊÌÊÌ
iÊiðÊÊÊVÃi`ÊViÊi«ÀiiÊ}>ÃiÌÊ«ÀÛ`iÃÊ
>ÝÕÊÃi>}ÊLiÌÜiiÊÌ
iÊ
ÕÃ}Ê>`ÊiÃÊ>ÃÃiLÞ°ÊÊ`âi`Ê>ÕÕÊ
ÀiyiVÌÀÊvÀÊ
}
ÊivwViVÞÊÜÌ
Ê
}
Ê«>VÌÊÀiÃÃÌ>ÌÊiVÌÊ`i`Ê>VÀÞVÊ
iðÊÊ-Õ««i`ÊÜÌ
ÊÕÌÌ>«Ê£Óä6ÉÓän6ÉÓ{ä6ÉÓÇÇ6ÊL>>ÃÌ°
>«ÊÌÊVÕ`i`°
Catalog Lamp
Number Watts Type Base Ballast
Ê}
Ê*ÀiÃÃÕÀiÊ-`Õ
-/"-
Óxx8Ê ÓxäÊ
£nÊ }ÕÊ
7
-/"-
{äx8Ê {ääÊ
£nÊ }ÕÊ
7
iÌ>Ê>`i
-/"-
ÓxxÊ ÓxäÊ /ÎÇÊ }ÕÊ
7
-/"-
{äxÊ {ääÊ /ÎÇÊ }ÕÊ
7
>VÌÀÞÊÃÌ>i`Ê"«ÌÃ
- iÊÕÃ}ÊvÀÊ£Óä6Ê>`ÊÓÇÇ6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°Ê
- iÊÕÃ}ÊvÀÊÓän6Ê>`ÊÓ{ä6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°
Ê >VÌÀÞÊ*Ài>«i`
,<Ê ÀâiÊÃ
Ê >ÌÊ/i«iÀi`Ê>ÃÃÊ*ÀÃ>ÌVÊiÃ
Ê-/",
ÎÓxäÊ ÓxäÊ Ón]Ê
i>ÀÊ }ÕÊ *
7Ê Î{
Ê-/",
Î{ääÊ {ääÊ ÎÇ]Ê
i>ÀÊ }ÕÊ *
7Ê ÎÈ
>VÌÀÞÊÃÌ>i`Ê"«ÌÃ
- iÊÕÃ}ÊvÀÊ£Óä6Ê>`ÊÓÇÇ6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°Ê
Ê- iÊÕÃ}ÊvÀÊÓän6]ÊÓ{ä6Ê>`Ê{nä6ÊÌÊ«ÀÌiVÌÊÊVÀVÕÌÀÞ®°
Ê/,É*
Ê /ÜÃÌVÊ*
ÌVÌÀ
Ê*
Ê ÕÌÌÊ/Þ«iÊ*
ÌVÌÀ
i`ÊÃÌ>i`ÊVViÃÃÀiÃ
-/",xxäÊ >ÀiÊ-
i`
-/",xxÓÊ iÝ>Ê6ÃÀ
-/",
£{Ê {¸Ê,Õ`Ê*iÊ`>«ÌiÀ
-/"
"Ê 1-/,Ê-1,
Ê"1 /
Ê8/1,
-
ÀÊÃÕÀv>ViÊÕÌi`Ê`ÕÃÌÀ>Ê>««V>ÌðÊÊiV>ÃÌÊ>ÕÕÊVÃÌÀÕVÌÊ
ÜÌ
Ê«ÀÃ>ÌVÊ}>ÃÃÊ}LiÊÊ`iV>ÃÌÊ>ÕÕÊ}Õ>À`°ÊÊ6
8ÊÕÌÃÊÃÕ««i`ÊÜÌ
Ê
ΣÉÓ¸ÊÀÊ{¸ÊÀÕ`ÊLÝÊvÀÊÃÕÀv>ViÊÕÌ}Ê>`ÊV`ÕÌÊ>VViÃð
678ÊÕÌÃÊÃÕ««i`ÊÜÌ
Ê{¸ÊÀÕ`ÊLÝ°
>«ÊVÕ`i`°
Catalog Lamp Weight
Number Watts Type Base olts Ballast Mounting (Lbs.) 6
8
}
Ê*ÀiÃÃÕÀiÊ-`Õ
-/"6
8xä 8Ê xäÊ
£ÇÊ i`ÕÊ £ÓäÊ ,i>VÌÀÊ *®Ê
i}Ê Ç
-/"678xä 8Ê xäÊ
£ÇÊ i`ÕÊ £ÓäÊ ,i>VÌÀÊ *®Ê 7>Ê Ç
«>VÌÊÕÀiÃViÌ (1)
-/"6
8Ón Ê ÓnÊ *
Ê 8ÎÓ`ÎÊ £ÓäÊ *Ê/À>ðÊ
i}Ê È
-/"678Ón Ê ÓnÊ *
Ê 8ÎÓ`ÎÊ £ÓäÊ *Ê/À>Ã°Ê 7>Ê È
NOTE: (1)
Ê,>Ìi`ÊvÀÊÓäc°
678
Electrical
-/"näÊ7ÀiÊÕ>À` -/"ÓäÇ Ê -/"ÎÎää
Installed on ST -150L fixture
-/"
"Ê6*",//Ê
-
/Ê8/1,
-
ÌÃÊ>ÊÎÊ£ÉÓ¸ÊÀÕ`ÊEÊVÌ>}ÊLÝiÃÊ>`Ê{¸ÊÀÕ`ÊLÝið
Catalog Height Dim.
Number Description Watts (Inches) (Inches)
Ê-/"6£
Ê -ÕÀv>ViÊÕÌÊÝÌÕÀiÊÜÌ
Ê>ÃÃÊLiÊEÊ
>ÃÌÊÕ>À`Ê Ê£ääÊ Ç£ÉÓÊÊ {£É{Ê
Ê-/"6Ó
Ê -ÕÀv>ViÊÕÌÊÝÌÕÀiÊÜÌ
Ê>ÃÃÊLiÊEÊ
>ÃÌÊÕ>À`Ê ÊÓääÊ £É{ÊÊ x£É{Ê
Ê-/"6
£ääÊ
i>ÀÊ>ÃÃÊLiÊ"ÞÊ £ääÊ Ê
Ê-/"6
ÓääÊ
i>ÀÊ>ÃÃÊLiÊ"ÞÊ ÓääÊ Ê
Ê-/"6£Î£Ê
>ÃÌÊÕ>À`Ê"ÞÊvÀÊ£ääÊ7>ÌÌÊÝÌÕÀiÊ-VÀiÜ®
Ê-/"6£ÓÇÊ 7ÀiÊÕ>À`Ê"ÞÊvÀÊ£ääÊ7>ÌÌÊÝÌÕÀiÊ
>«®
Ê-/"6£ÎÓÊ
>ÃÌÊÕ>À`Ê"ÞÊvÀÊÓääÊ7>ÌÌÊÝÌÕÀiÊ-VÀiÜ®
*1Ê1-
-
7iÊvviÀÊ>ÊÜ`iÊÛ>ÀiÌÞÊvÊ«Õ}ÊvÕÃið
Catalog Rating Put
Number Description Amps. p
EAG-690-10 ÕÃi
`Ê*Õ}ÊÕÃiÊ £äÊ xÉ£ää
EAG-690-15 ÕÃi
`Ê*Õ}ÊÕÃiÊ £äÊ xÉ£ää
EAG-690-20 ÕÃi
`Ê*Õ}ÊÕÃiÊ £äÊ xÉ£ää
EAG-690-25 ÕÃi
`Ê*Õ}ÊÕÃiÊ £äÊ xÉ£ää ""
EAG-690-30 ÕÃi
`Ê*Õ}ÊÕÃiÊ £äÊ xÉ£ää Shows K
"7
"6
," Entire K vanishes
nly part of K vanishes
--Ê1-
-
-,Ê}>ÃÃÊvÕÃiÃÊ>ÀiÊÕÃi`ÊvÀÊyÕÀiÃViÌÊwÝÌÕÀiðÊÊ1ÃiÊÜÌ
Ê 1-,ÓÊvÕÃiÊ
`iÀðÊÊ
"Ì
iÀÊÌÞ«iÃÊ>ÃÊ>Û>>Li°
Catalog Rating Put
Number Amps. Mfg. p
"1-,ÓÊ ÓÊ Õ`Ê x
"1-,ÎÊ ÎÊ Õ`Ê x
"1-,{Ê {Ê Õ`Ê x
"1-,xÊ xÊ Õ`Ê x -,Ê>ÃÃÊÕÃi
"1-,£äÊ £äÊ Õ`Ê x
1-,Ó iÊÕÃiÊ`iÀÊvÀÊ-,É,ÊÕÃiÃÊ,>Ìi`ÊÎää6Ê>Ý°Ê ÕÃÃÊ £ä
1-, 1ÛiÀÃ>ÊiÊÕÃiÊ`iÀÊvÀÊÕÃiÃÊ£É{¸Ý££É{¸ÎÓ6Ê>Ý°Ê ÕÃÃÊ £ä
-,Ê>ÃÃÊÕÃiÊ>`Ê
,ÓÊ`iÀ
}
Ê"ÕÌ«ÕÌÊnää -iÊ{Îä
Catalog Per
Number Description (1) Case Catalog Per
Number Description (1) Case
3168-10204Ê £n/£ÓÉ
7É"Ê Ó{
22403Ê Ó{/£ÓÉ
7Ê Îä
25303Ê £n/£ÓÉ- xäÉ"Ê Îä 23618Ê ÎÈ/£ÓÉ
7Ê Îä
25313Ê Ó{/£ÓÉ
7É"Ê Îä 24218Ê {Ó/£ÓÉ
7Ê Îä
25314Ê Ó{/£ÓÉÉ"Ê Îä 24266Ê {Ó/ÈÉ
7Ê Ó{
25312Ê Ó{/£ÓÉ- xäÉ"Ê Îä 24830Ê {n/£ÓÉ
7Ê Îä
25322Ê Îä/£ÓÉ
7É"Ê Îä 26001Ê Èä/£ÓÉ
7Ê Îä
Ê Îä/£Ó"Ê Îä/£ÓÉÉ"Ê £Ó 26403Ê È{/£ÓÉ
7Ê Îä
25333Ê ÎÈ/£ÓÉ
7É"Ê Îä 26466Ê È{/ÈÉ
7Ê Ó{
25332Ê ÎÈ/£ÓÉÉ"Ê Îä 27256Ê ÇÓ/£ÓÉ
7Ê £x
27266Ê
Electrical
25334Ê ÎÈ/£ÓÉ- xäÉ"Ê Îä ÇÓ/nÉ
7Ê Ó{
28417Ê n{/£ÓÉ
7Ê £x
25342Ê {Ó/£ÓÉ
7É"Ê Îä 29815Ê È/£ÓÉ
7É--Ê £x
25343Ê {Ó/£ÓÉÉ"Ê Îä 29807Ê È/£ÓÉ{£Ê £x
25344Ê {Ó/£ÓÉ- xäÉ"Ê Îä 29666Ê È/nÉ
7Ê Ó{
25146Ê {n/£ÓÉ
7É"Ê Îä "/
\ (1)Ê >Êi}Ì
ÊÃÊÃÌ>Ìi`ÊÊÌ
iÊ`iÃVÀ«ÌÆÊ°i°Ê«ÀiwÝʸȸÊÃÊ>VÌÕ>ÞÊȸ°
25150Ê {n/£ÓÉÉ"Ê Îä
25153Ê {n/£ÓÉ- xäÉ"Ê Îä
ÊÊÊÊÊÊÊÊÊÊÊÊVÌÕ>Êi}Ì
ÊvÊ>«Ã]ÊiÝVÕ`}ÊVÌ>VÌÃ]ÊÃÊÎÊ£É{¸ÊiÃî
25147Ê {n/£ÓÉ77É"Ê Îä
25120Ê Èä/£ÓÉÉ"Ê Îä
25126Ê Èä/£ÓÉ
7É"Ê Îä
25119Ê Èä/£ÓÉ- xäÉ"Ê Îä
25352Ê È{/£ÓÉ
7É"Ê Îä
25353Ê È{/£ÓÉÉ"Ê Îä ,>«`Ê-Ì>ÀÌ
25355Ê È{/£ÓÉ- xäÉ"Ê Îä
25176Ê ÇÓ/£ÓÉ
7É"Ê £x Catalog Per
Number Description (2) Case
25189Ê ÇÓ/£ÓÉÉ"Ê £x
25190Ê ÇÓ/£ÓÉ- xäÉ"Ê £x 23451Ê Îä/£ÓÉÎäÉ,-É--Ê Îä
25384Ê n{/£ÓÉ
7É"Ê £x 23485Ê Îä/£ÓÉÎxÉ,-É--Ê Îä
23472Ê Îä/£ÓÉ
7É,-É--Ê Îä
25385Ê n{/£ÓÉÉ"Ê £x 23473Ê Îä/£ÓÉ77É,-É--Ê Îä
25386Ê n{/£ÓÉ- xäÉ"Ê £x 23474Ê Îä/£ÓÉnÎäÉ,-Ê Îä
25134Ê È/£ÓÉ
7É"É
/Ê £x 23139Ê Îä/£ÓÉnÎxÉ,-Ê Îä
25135Ê È/£ÓÉÉ"É
/Ê £x 23484Ê Îä/£ÓÉÎxÉ,-Ê Îä
25010Ê È/£ÓÉ
7É"É--Ê £x 23488Ê Îä/£ÓÉ{£É,-Ê Îä
25164Ê È/£ÓÉ- xäÉ"Ê £x 23476Ê Îä/£ÓÉ
7É,-Ê Îä
25008Ê È/£ÓÉnÎäÉ"É--Ê £x 23482Ê Îä/£ÓÉ77É,-Ê Îä
25024Ê È/£ÓÉÎxÉ"É--ÊÇÎx®Ê £x 23478Ê Îä/£ÓÉÉ,-Ê Îä
25023Ê È/£ÓÉ{£É"É--ÊÇ{£®Ê £x 24589Ê {äÉnÎäÉ--Ê Îä
25011Ê È/£ÓÉ77É"É--Ê £x 24581Ê {äÉnÎxÉ--Ê Îä
25166Ê È/£ÓÉnÎxÉ"Ê £x 24586Ê {äÉn{£É--Ê Îä
25185Ê È/£ÓÉnÈxÉ"Ê £x 24706Ê {äÉnÈxÉ--Ê Îä
25184Ê È/£ÓÉ{£É"Ê £x 24580Ê {äÉÎäÉ--Ê Îä
24585Ê {äÉÎxÉ--Ê Îä
25162Ê È/£ÓÉ É"Ê £x 24593Ê {äÉ{£É--Ê Îä
"/
\ (1)Ê >Êi}Ì
ÊÃÊÃÌ>Ìi`ÊÊÌ
iÊ`iÃVÀ«ÌÆÊ°i°Ê«ÀiwÝʸȸÊÃÊ>VÌÕ>ÞÊȸ° 24594Ê {ä
7É--Ê Îä
24588Ê {ä
78É--Ê Îä
ÊÊÊÊÊÊÊÊÊÊÊÊVÌÕ>Êi}Ì
ÊvÊ>«Ã]ÊiÝVÕ`}ÊVÌ>VÌÃ]ÊÃÊÎÊ£É{¸ÊiÃî 24590Ê {ä7É--Ê Îä
24591Ê {ä7É--Ê Îä
6iÀÞÊ}
Ê"ÕÌ«ÕÌÊ£xää 24595Ê {ä77É--Ê Îä
24322Ê {äÊ £ä
Catalog Per 24673Ê {äÉ"Ê £ä
Number Description (1) Case 24660Ê {ä,"É+É,*Ê È
24671Ê {ä,"É+É7-É,*Ê È
25248Ê {n/£ÓÉ
7É6"Ê Îä 24438Ê {ä Ê Îä
25262Ê Èä/£ÓÉ
7É6"Ê Îä 24441Ê {ä
78Ê Îä
25272Ê ÇÓ/£ÓÉ
7É6"Ê £x 24570Ê {äÉnÈxÊ Îä
25209Ê È/£ÓÉ
7É6"Ê £x 24476Ê {äÉnÎäÊ Îä
25296Ê È/£ÓÉ
7É6"É--Ê £x 24577Ê {äÉnÎxÊ Îä
24578Ê {äÉn{£Ê Îä
NOTE: (1)Ê >Êi}Ì
ÊÃÊÃÌ>Ìi`ÊÊÌ
iÊ`iÃVÀ«ÌÆÊ°i°Ê«ÀiwÝʸȸÊÃÊ>VÌÕ>ÞÊȸ°
ÊÊÊÊÊÊÊÊÊÊÊÊVÌÕ>Êi}Ì
ÊvÊ>«Ã]ÊiÝVÕ`}ÊVÌ>VÌÃ]ÊÃÊÎÊ£É{¸ÊiÃî NOTE: (2)Ê >Êi}Ì
ÊvʸÎä¸ÊÃÊÎȸ]ʸ{ä¸ÊÃÊ{n¸ÊÌÊL>VÊvÊ>«
`iÀð
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
C-40
"-,É-96 Ê1",
-
/Ê*Ê+1
Ê,
,
ÊÊVÌ°
"VÌÀÊ/nÊ-ÌÀ>}
ÌÊ,>«`Ê-Ì>ÀÌ
*Ài
i>Ì ÇääÊ-iÀiÃÊUÊÇxÊ
,
Catalog Nominal Length Per
Number Description (Inches) (1) Case Catalog Nominal Length Per
Number Description (Inches) Case
20416Ê {/xÉ
7Ê ÈÊ Ó{ 21849Ê "£ÇÉÇÎäÊ Ó{Ê Îä
21832Ê "£ÇÉÇÎxÊ Ó{Ê Îä
20616Ê È/xÉ
7Ê Ê Ó{ 21831Ê "£ÇÉÇ{£Ê Ó{Ê Îä
20816Ê n/xÉ
7Ê £ÓÊ Ó{ 21851Ê "ÓxÉÇÎäÊ ÎÈÊ Îä
21817Ê "ÓxÉÇÎxÊ ÎÈÊ Îä
21316Ê £Î/xÉ
7Ê Ó£Ê Ó{ 21829Ê "ÓxÉÇ{£Ê ÎÈÊ Îä
21766Ê £Î/nÉ
7Ê Ó£Ê Ó{ 21852Ê "ÎÓÉÇÎäÊ {nÊ Îä
21997Ê "ÎÓÉÇÎäÉ
"Ê Ó{Ê Îä
21486Ê £{/nÉ
7Ê £xÊ Ó{ 21823Ê "ÎÓÉÇÎxÊ {nÊ Îä
21488Ê £{/nÉÊ £xÊ Ó{ 21998Ê "ÎÓÉÇÎxÉ
"Ê Ó{Ê Îä
21824Ê "ÎÓÉÇ{£Ê {nÊ Îä
21409Ê 21999Ê
Electrical
£{/£ÓÉ
7Ê £xÊ Îä "ÎÓÉÇ{£É
"Ê Ó{Ê Îä
21411Ê £{/£ÓÉÊ £xÊ Îä 21809Ê "ÎÓÉÇxäÊ {nÊ Îä
21435Ê £{/£ÓÉ77Ê £xÊ Îä 21993Ê "ÎÓÉÇÈxÊ Ó{Ê Îä
21961Ê "ÎÓÉ"Ê Ó{Ê Îä
21610Ê £x/nÉnÎäÊ £nÊ Ó{ 21853Ê "{äÉÇÎäÊ ÈäÊ Îä
21616Ê £x/nÉ
7Ê £nÊ Ó{ 21820Ê "{äÉÇÎxÊ ÈäÊ Îä
21600Ê £x/nÉÊ £nÊ Ó{ 21827Ê "{äÉÇ{£Ê ÈäÊ Îä
21642Ê £x/nÉ- xäÊ £nÊ Ó{ 21854Ê "ÈÉÇÎäÊ ÈÊ Ó{
21839Ê "ÈÉÇÎxÊ ÈÊ Ó{
21657Ê £x/nÉ,"É+É,*Ê £nÊ È 21840Ê "ÈÉÇ{£Ê ÈÊ Ó{
21701Ê £x/nÉ77Ê £nÊ Ó{
21532Ê £x/£ÓÉ
7Ê £nÊ Îä
21534Ê £x/£ÓÉÊ £nÊ Îä nääÊ-iÀiÃÊUÊnÓÊ
,
21542Ê £x/£ÓÉ77Ê £nÊ Îä
Catalog Nominal Length Per
23014Ê £n/nÉ
7ÉÉÓ{Ê Ó{Ê Ó{ Number Description (Inches) Case
23027Ê £n/nÉ
7ÉÉÓÈÊ ÓÈÊ Ó{ 21978Ê "£ÇÉnÓÇÊ Ó{Ê Îä
23028Ê £n/nÉ
7ÉÉÓnÊ ÓnÊ Ó{ 21882Ê "£ÇÉnÎäÊ Ó{Ê Îä
23030Ê £n/nÉ
7ÉÉÎäÊ ÎäÊ Ó{ 21883Ê "£ÇÉnÎxÊ Ó{Ê Îä
21884Ê "£ÇÉn{£Ê Ó{Ê Îä
22075Ê Óä/£ÓÉnÎäÊ Ó{Ê Îä 21979Ê "ÓxÉnÓÇÊ ÎÈÊ Îä
22251Ê Óä/£ÓÉÎxÊÇÎx®Ê Ó{Ê Îä 21886Ê "ÓxÉnÎäÊ ÎÈÊ Îä
22255Ê Óä/£ÓÉ{£ÊÇ{£®Ê Ó{Ê Îä 21887Ê "ÓxÉnÎxÊ ÎÈÊ Îä
21888Ê "ÓxÉn{£Ê ÎÈÊ Îä
22078Ê Óä/£ÓÉ
7Ê Ó{Ê Îä
22082Ê Óä/£ÓÉ
78Ê Ó{Ê Îä 21955Ê "ÎÓÉnÓÇÊ {nÊ Îä
21890Ê "ÎÓÉnÎäÊ {nÊ Îä
22083Ê Óä/£ÓÉÊ Ó{Ê Îä 21891Ê "ÎÓÉnÎxÊ {nÊ Îä
22029Ê Óä/£ÓÉ,"É+É,*Ê Ó{Ê È 21892Ê "ÎÓÉn{£Ê {nÊ Îä
22013Ê Óä/£ÓÉ,"É+É7-É,*Ê Ó{Ê È 21980Ê "ÎÓÉnxäÊ {nÊ Îä
22131Ê Óä/£ÓÉ77Ê Ó{Ê Îä 21759Ê "ÎÓÉnÎäÉ8*É
"Ê {nÊ Îä
21763Ê "ÎÓÉnÎxÉ8*É
"Ê {nÊ Îä
22527Ê Óx/£ÓÉ
7ÉÓnÊ ÓnÊ Îä 21767Ê "ÎÓÉn{£É8*É
"Ê {nÊ Îä
22528Ê Óx/£ÓÉ
7ÉÎäÊ ÎäÊ Îä 21893Ê "{äÉnÎäÊ ÈäÊ Îä
22333Ê Óx/£ÓÉ77ÉÎäÊ ÎäÊ Îä 21894Ê "{äÉnÎxÊ ÈäÊ Îä
22529Ê Óx/£ÓÉ
7ÉÎÎÊ ÎÎÊ Îä 21895Ê "{äÉn{£Ê ÈäÊ Îä
21897Ê "ÈÉnÎäÊ ÈÊ Ó{
23116Ê Îä/nÉ
7Ê ÎÈÊ Ó{ 21898Ê "ÈÉnÎxÊ ÈÊ Ó{
23127Ê Îä/nÉ
78Ê ÎÈÊ Ó{ 21899Ê "ÈÉn{£Ê ÈÊ Ó{
23100Ê Îä/nÉÊ ÎÈÊ Ó{ 21795Ê "ÈÉnxäÊ ÈÊ £x
23160Ê Îä/nÉ,"É+É,*Ê ÎÈÊ È
23182Ê Îä/nÉ Ê ÎÈÊ Ó{
23701Ê Îä/nÉ77Ê ÎÈÊ Ó{ ääÊ-iÀiÃÊUÊäÊ
,
Catalog Nominal Length Per
NOTE: (1)
Êi>ÃÕÀi`ÊÌÊL>VÊvÊ>«
`iÀð Number Description (Inches) Case
21868Ê "£{ÉxäÉÓä¸Ê ÓäÊ Îä
21871Ê "£ÇÉxäÉÓ{¸Ê Ó{Ê Îä
21869Ê "Ó£ÉxäÉÎä¸Ê ÎäÊ Îä
21872Ê "ÓxÉxäÉÎÈ¸Ê ÎÈÊ Îä
21870Ê "ÓnÉxäÉ{ä¸Ê {äÊ Îä
21880Ê "ÎÓÉxäÉ{n¸Ê {nÊ Îä
21873Ê "{äÉxäÉÈä¸Ê ÈäÊ Îä
"VÌÀÊ
ÕÀÛ>ÕiÊ,>«`Ê-Ì>ÀÌ
ȸÊ-«>V}ÊUÊÇääÊ-iÀiÃÊUÊÇxÊ
,
Catalog Per
ÀVi
Number Description Case
21967Ê "ÎÓÉÇÎäÉÈÊ £È Catalog utside Dia. Per
21968Ê "ÎÓÉÇÎxÉÈÊ £È Number Description (Inches) Case
21969Ê "ÎÓÉÇ{£ÉÈÊ £È 20156Ê
È/É
7É,-Ê È°xÊ £Ó
21973Ê "ÎÓÉÇxäÉÈÊ £È
20155Ê
È/É77É,-Ê È°xÊ £Ó
20148Ê
n/É
7É,-Ê nÊ £Ó
20080Ê
n/ÉÉ,-Ê nÊ £Ó
"VÌÀÊ
ÕÀÛ>ÕiÊ,>«`Ê-Ì>ÀÌ 20088Ê
n/É77É,-Ê nÊ £Ó
20085Ê
n/ÉÎxä É,-Ê nÊ £Ó
ȸÊ-«>V}ÊUÊnääÊ-iÀiÃÊUÊnÓÊ
, 20142Ê
£Ó/É
7É,-Ê £ÓÊ £Ó
Catalog Per 20030Ê
£Ó/ÉÉ,-Ê £ÓÊ £Ó
Number Description Case 20037Ê
£Ó/É77É,-Ê £ÓÊ £Ó
21970Ê 20132Ê
Electrical
"ÎÓÉnÎäÉÈÊ £È
£È/É
7É,-Ê £ÈÊ £Ó
21971Ê "ÎÓÉnÎxÉÈÊ £È 20057Ê
£È/É77É,-Ê £ÈÊ £Ó
21972Ê "ÎÓÉn{£ÉÈÊ £È 20072Ê
£È/ÉÉ,-Ê £ÈÊ £Ó
21986Ê "ÎÓÉnÎäÉÈÉ8*Ê £È
21984Ê "ÎÓÉnÎxÉÈÉ8*Ê £È
21985Ê "ÎÓÉn{£ÉÈÉ8*Ê £È
"VÌÀÊ
ÕÀÛ>ÕiÊ,>«`Ê-Ì>ÀÌ
£xÉn¸Ê-«>V}ÊUÊnÓÊ
,
ÕÀÛ>ÕiÊ,>«`Ê-Ì>ÀÌ
Catalog Per 1-
>«i`ÊUÊȸÊ-«>V}
Number Description Case Catalog Per
21834Ê "£ÈÉnÎäÊ £x Number Description Case
21835Ê "£ÈÉnÎxÊ £x
21836Ê "£ÈÉn{£Ê £x 24017Ê {äÉnÎäÉÈÊ £Ó
24080Ê {äÉÎäÉÈÊ £Ó
21874Ê "Ó{ÉnÎäÊ £x 24081Ê {äÉÎxÉÈÊ £Ó
21875Ê "Ó{ÉnÎxÊ £x 24082Ê {äÉ{£ÉÈÊ £Ó
21876Ê "Ó{Én{£Ê £x 24004Ê {äÉ
78ÉÈÊ £Ó
21877Ê "ΣÉnÎäÊ £x 24046Ê {äÉ
7ÉÈÉ--Ê £Ó
21878Ê "ΣÉnÎxÊ £x
21879Ê "ΣÉn{£Ê £x 24047Ê {äÉ77ÉÈÉ--Ê £Ó
21819Ê "ΣÉÇxäÊ(1)Ê £x 24063Ê {äÉÎäÉÈÉ--Ê £Ó
24065Ê {äÉÎxÉÈÉ--Ê £Ó
21917Ê "ΣÉnÎäÉ8*Ê £x 24067Ê {äÉ{£ÉÈÉ--Ê £Ó
21919Ê "ΣÉnÎxÉ8*Ê £x 24047Ê {äÉ77ÉÈÉ--Ê £Ó
21926Ê "ΣÉn{£É8*Ê £x 24049Ê {ä7ÉÈÉ--Ê £Ó
NOTE: (1)
ÊÇxÊ
,Ê
*iÌÀÊ/x
Catalog Nominal Length Per
ÕÀÛ>ÕiÊ>«ÃÊ,>«`Ê-Ì>ÀÌ
Number Description (Inches) Case 1-
>«i`ÊUÊÎxÉn¸Ê-«>V}
20810Ê *£{ÉnÎäÊ Ó{Ê {ä Catalog Per
20812Ê *£{ÉnÎxÊ Ó{Ê {ä Number Description Case
20822Ê *£{Én{£Ê Ó{Ê {ä
29034Ê {äÉÎäÉÎÊ £Ó
20823Ê *Ó£ÉnÎäÊ ÎÈÊ {ä 29035Ê {äÉ{£ÉÎÊ £Ó
20832Ê *Ó£ÉnÎxÊ ÎÈÊ {ä
20835Ê *Ó£Én{£Ê ÎÈÊ {ä
20836Ê *ÓnÉnÎäÊ {nÊ {ä
20841Ê *ÓnÉnÎxÊ {nÊ {ä
20842Ê *ÓnÉn{£Ê {nÊ {ä
20843Ê *ÎxÉnÎäÊ ÈäÊ {ä
20844Ê *ÎxÉnÎxÊ ÈäÊ {ä
20845Ê *ÎxÉn{£Ê ÈäÊ {ä
20301Ê
-É,
Ê £ä
20302Ê
-É,
Ê £ä
20331Ê
£Î-ÉnÓÇÊ xä
20283Ê
£Î-ÉnÎäÊ xä
20335Ê
£Î-ÉnÎxÊ xä
20306Ê
£Î-Én{£Ê xä
20309Ê
£Î-ÉnxäÊ xä ÕÕÝÊ
Ê-vÌÊ7
ÌiÊ/À«iÊ
iVÌÀVÊ-iv >>ÃÌi`
«>VÌÊyÕÀiÃViÌÊ>«ÃÊÜÌ
Êi`ÕÊL>ÃiÃÊ>`ÊLÕÌÊL>>ÃÌ°
Catalog Per
Number Description Case
29275
É
ÉnÎäÊÊ£Óä6Ê È
ÕÕÝÊ-É
Ê-}i 29307
£x
ÉnÎäÉ
ÊÊ£Óä6Ê È
ÀÊ`}Ê>`ÊiiVÌÀVÊL>>ÃÌð 29308
Óä
ÉnÎäÉ
ÊÊ£Óä6Ê È
29236
Óä
É
ÉnÎäÊÊ£Óä6Ê È
Catalog Per 29246
Óä
É
ÉnÓÇÊÊ£Óä6Ê È
Number Description Case 29310
ÓÎ
ÉnÎäÉ
ÊÊ£Óä6Ê È
20311Ê
x-É
ÉnÓÇÊ xä 29237
Îä
É
ÉnÎäÉ
ÊÊ£Óä6Ê È
20315Ê
x-É
Én{£Ê xä 29244
Îä
É
ÉnÓÇÊÊ£Óä6Ê È
20312Ê
Ç-É
ÉnÓÇÊ xä 20210
n/ÉnÎäÉ
ÊÊn6Ê È
20316Ê
Ç-É
Én{£Ê xä 20211
n/ÉnÓÇÉ
ÊÊn6Ê È
20313Ê
-É
ÉnÓÇÊ xä
20317Ê
-É
Én{£Ê xä
20314Ê
£Î-É
ÉnÓÇÊ xä
20284Ê
£Î-É
ÉnÎäÊ xä
20318Ê
£Î-É
Én{£Ê xä
,iyiVÌÀÊ
iVÌÀVÊ-iv >>ÃÌi`
«>VÌÊyÕÀiÃViÌÊ>«ÃÊÜÌ
Êi`ÕÊL>ÃiÃÊ>`ÊLÕÌÊL>>ÃÌ°
Catalog Per
ÕÕÝÊÊÕLiÊ*Ài
i>Ì Number Description Case
29298Ê
£x
É,ÎäÉnÎäÉ
Ê È
Catalog Per
Number Description Case 29299Ê
Óä
É,{äÉnÎäÉ
Ê È
20689Ê
ÉnÓÇÊ xä
20783Ê
ÉnÎäÊ xä
20690Ê
ÉnÎxÊ xä
20691Ê
£ÎÉnÓÇÊ xä
20705Ê
£ÎÉnÎäÊ xä
20692Ê
£ÎÉnÎxÊ xä ÕÕÝÊ
ÊLiÊ-
>«i`Ê
iVÌÀVÊ-iv >>ÃÌi`
20708Ê
£ÎÉn{£Ê xä
«>VÌÊyÕÀiÃViÌÊ>«ÃÊÜÌ
Êi`ÕÊL>ÃiÃÊ>`ÊLÕÌÊL>>ÃÌ°
20676Ê
£nÉnÓÇÊ xä
20709Ê
£nÉnÎäÊ xä Catalog Per
20677Ê
£nÉnÎxÊ xä Number Description Case
20678Ê
£nÉn{£Ê xä 29262Ê
£Î
É ÉnÎäÊÊ£Óä6Ê È
20679Ê
ÓÈÉnÓÇÊ xä 29261Ê
£Î
ÉÉnÎäÊÊ£Óä6Ê È
20710Ê
ÓÈÉnÎäÊ xä 29300Ê
£x
ÉÎäÉnÎäÉ
ÊÊ£Óä6Ê È
20680Ê
ÓÈÉnÎxÊ xä
20681Ê
ÓÈÉn{£Ê xä 29301Ê
Óä
É{äÉnÎäÉ
ÊÊ£Óä6Ê È
"-,É-96 Ê1",
-
/Ê*Ê+1
Ê,
,
ÊÊVÌ°
>ViÌi`Ê>«Ã
ÀÊV`ÊÌi«iÀ>ÌÕÀiÊ>««V>Ìð
ÕÕÝÊ
Electrical
20582Ê /ÎÈÉnÎxÊ £ä Catalog Nominal Length Per
20583Ê /ÎÈÉn{£Ê £ä Number Description (Inches) (1) Case
20584Ê /{äÉnÎäÉ,-Ê £ä 20633Ê È/xÉÎxä Ê nÊ Ó{
20585Ê /{äÉnÎxÉ,-Ê £ä
20586Ê /{äÉn{£É,-Ê £ä 20833Ê n/xÉÎxä Ê £ÓÊ Ó{
20590Ê /xxÉnÎäÊ £ä 21623Ê £x/nÉÎxä Ê £nÊ Ó{
20591Ê /xxÉnÎxÊ £ä 22113Ê Óä/£ÓÉÎxä Ê Ó{Ê Ó{
20592Ê /xxÉn{£Ê £ä
23113Ê Îä/nÉÎxä Ê ÎÈÊ Ó{
24922Ê {äÉÎxä Ê {nÊ Îä
NOTE: (1)
Êi>ÃÕÀi`ÊÌÊL>VÊvÊ>«
`iÀð
ÕÕÝÊ
«>VÌÊÕÀiÃViÌÊ>«Ã
>V}
ÌÊ ÕiÊ>«Ã
Catalog Per
Number Description Case Catalog Nominal Length Per
Number Description (Inches) Case
20551Ê
£nÉnÎäÊ £ä
20552Ê
£nÉn{£Ê £ä 20425Ê {/xÉ Ê ÈÊ Ó{
20553Ê
Ó{ÉnÎäÊ £ä 20825Ê n/xÉ Ê £ÓÊ Ó{
20558Ê
Ó{Én{£Ê £ä 21625Ê £x/nÉ Ê £nÊ È
20559Ê
ÎÈÉnÎäÊ £ä 22114Ê Óä/£ÓÉ Ê Ó{Ê È
20560Ê
ÎÈÉn{£Ê £ä
24024Ê {ä É,*Ê {nÊ È
ÕÕÝÊ/Ê/À«iÊ*Ài i>ÌÊ>«Ã
«>VÌÊÕÀiÃViÌÊ>«Ã
Catalog Per -Õ«iÀÊ>âÊ ÕiÊ>«Ã
Number Description Case Catalog Nominal Length Per
20756Ê
£n/ÉnÓÇÊ xä Number Description (Inches) Case
20752Ê
ÓÈ/ÉnÓÇÊ xä 24465Ê {ä/£ÓÉ- ÉÈx7Ê {nÊ Îä
iiÀ>Ê*ÕÀ«ÃiÊUÊi
>«ÃÞÌiÊ`LÀi>ÊUÊ
Catalog Per
Catalog Per Number Description Case
Number Description Case
18907Ê {Ó É
*ÊÊ£Óä6Ê £Ó
10037Ê £x£xÊÊ£Óä6Ê £Óä 18908Ê {Ó É
*ÊÊ£Îä6Ê £Ó
10038Ê £x£xÊÊ£Îä6Ê £Óä
10018Ê £x£xÉ
ÊÊ£Óä6Ê £Óä 18921Ê xÓ É
*ÊÊ£Óä6Ê £Ó
10019Ê £x£xÉ
ÊÊ£Îä6Ê £Óä 18922Ê xÓ É
*ÊÊ£Îä6Ê £Ó
10644Ê ÓxÊÊ£Óä6Ê £Óä 18937Ê ÇÓ É
*ÊÊ£Óä6Ê £Ó
10645Ê ÓxÊÊ£Îä6Ê £Óä 18938Ê ÇÓ É
*ÊÊ£Îä6Ê £Ó
11285Ê ÓxÊÊÓÎä6Ê £Óä 18968Ê xäÉÉ
,9-/ÊÊ£Óä6Ê £Ó
11289Ê ÓxÊÊÓÇÇ6Ê £Óä
10693Ê ÓxÉ
ÊÊ£Óä6Ê £Óä 18960Ê ÈäÉÊÊ£Óä6Ê £Ó
10694Ê ÓxÉ
ÊÊ£Îä6Ê £Óä 18965Ê ÇxÉÊÊ£Óä6Ê £Ó
Electrical
-££ -£{
-ÌÀ>}
ÌÊ-`i`ÊUÊ- /ÕLÕ>ÀÊUÊ/
Catalog Per Catalog Per
Number Description Case Number Description Case
16757Ê Î-ÈÉxÊÊ£Óä6Ê £Óä 18038Ê £x/ÈÊÊ£Îä6Ê Èä
16759Ê Î-ÈÉxÊÊ£Îä6Ê £Óä 18078Ê £x/ÈÊÊ£{x6Ê Èä
16960Ê È-ÈÉ
ÊÊ£Óä6Ê £Óä 18173Ê £x/Ç ÊÊ£Óä6Ê Èä
16927Ê È-ÈÉ
ÊÊ£Ó6Ê £Óä 18185Ê £x/Ç
ÊÊ£Óä6Ê Èä
16929Ê È-ÈÉ
ÊÊÓ{6Ê £Óä 18208Ê £x/Ç
ÊÊ£Óä6Ê Èä
16930Ê È-ÈÉ
ÊÊÎä6Ê £Óä 18501Ê £x/£ä
ÊÊ£Óä6Ê Èä
16938Ê È-ÈÉ
ÊÊ£Îä6Ê £Óä 18128Ê Óx/ÈÊ£ÉÓÊÊ£Îä6Ê Èä
16942Ê È-ÈÉ
ÊÊ£{x6Ê £Óä 18111Ê Óx/ÈÊ£ÉÓÉÊÊ£Îä6Ê Èä
16943Ê È-ÈÉ
ÊÊ£xx6Ê £Óä 18106Ê
Electrical
Óx/ÈÊ£ÉÓÊ
ÊÊ£Îä6Ê Èä
16960Ê È-ÈÉ
ÊÊ£Óä6Ê £Óä 18316Ê Óx/n
ÊÊ£Îä6Ê Èä
17314Ê È-£{ÊÊ££x£Óx6Ê £Óä 18512Ê Óx/£äÊÊ£Îä6Ê Èä
18505Ê Óx/£äÉÊÊ£Îä6Ê Èä
16782Ê È-È
ÊÊ£Óä6Ê £Óä
16784Ê È-È
ÊÊ£Îä6Ê £Óä 18096Ê {ä/È°xÊÊ£Óä6Ê Èä
16790Ê È-È
ÊÊ£{x6Ê £Óä 18652Ê {ä/£äÊÊ£Îä6Ê Èä
18669Ê {ä/£äÉÊÊ£Îä6Ê Èä
19355Ê Ç£ÉÓÊ-ÊÊ£Îä6Ê £Óä
19426Ê Ç£ÉÓÊ-É
ÊÊ££x£Óx6Ê £Óä
19429Ê Ç£ÉÓÊ-É
ÊÊ££x£Óx6Ê £Óä
19432Ê Ç£ÉÓÊ-É
"ÊÊ££x£Óx6Ê £Óä
19423Ê Ç£ÉÓÊ-É
,ÊÊ££x£Óx6Ê £Óä
19420Ê Ç£ÉÓÊ-É
7ÊÊ£Óä6Ê £Óä
16919Ê £ä-££ É
ÊÊ£Îä6Ê £Óä
17406Ê £ä-£{ÊÊ£Óä6Ê £Óä
17450Ê ££-£{ÊÊ£Îä6Ê £Óä
17458Ê ££-£{É
,ÊÊ££x£Óx6Ê £Óä *>ÀÊ,iyiVÌÀÊ>«Ã
17453Ê ££-£{ÉÊÊ£Îä6Ê £Óä
17489Ê ££-£{É/ ÊÊ£Óx£Îä6Ê £Óä Catalog Per
17490Ê ££-£{É/ÊÊ£Óx£Îä6Ê £Óä Number Description Case
17487Ê ££-£{É/,ÊÊ£Óx£Îä6Ê £Óä 13802Ê Èx*,ÉÊÊ£Óä6Ê £x
17488Ê ££-£{É/9ÊÊ£Óx£Îä6Ê £Óä 13805Ê Èx*,ÉÊÊ£Îä6Ê £x
13595Ê {ä-££ ÊÊ£Óä6Ê £Óä 13804Ê Èx*,É-*ÊÊ£Óä6Ê £x
13808Ê Èx*,É-*ÊÊ£Îä6Ê £x
13850Ê Çx*,ÉÎÊÊ£Óä6Ê £Ó
13934Ê £ää*,ÉÉÉ,*ÊÊ£Óä6Ê È
13948Ê £ää*,ÉÉ É,*ÊÊ£Óä6Ê È
13949Ê £ää*,ÉÉÉ,*ÊÊ£Óä6Ê È
13933Ê £ää*,ÉÉ,É,*ÊÊ£Óä6Ê È
13932Ê £ää*,ÉÉ9É,*ÊÊ£Óä6Ê È
13922Ê £xä*,ÎnÉÊÊ£Îä6Ê £x
13921Ê £xä*,ÎnÉ-*ÊÊ£Îä6Ê £x
13848Ê £xä*,ÉÎ-*ÊÊ£Óx£Îä6Ê £Ó
13854Ê £xä*,ÉÎÊÊ£Óx£Îä6Ê £Ó
iÊUÊ
14572Ê £xäÉ£Óä*,ÉÎÉ--ÊÊ£Óä6Ê £x
Catalog Per
Number Description Case 15196Ê Óää*,{ÈÉÎÊÊ£Óx£Îä6Ê £Ó
15193Ê Óää*,{ÈÉÎ -*ÊÊ£Óx£Îä6Ê £Ó
13609Ê Ç
ÇÊÊ£Îä6Ê £Óä 14946Ê Îää*,xÈÉÊÊ£Óx£Îä6Ê £Ó
13629Ê Ç
ÇÉ"ÊÊ£Óä6Ê £Óä 14944Ê Îää*,xÈÉ -*ÊÊ£Óx£Îä6Ê £Ó
13626Ê Ç
ÇÉ,ÊÊ£Óä6Ê £Óä 14945Ê Îää*,xÈÉ7ÊÊ£Óx£Îä6Ê £Ó
13623Ê Ç
ÇÉ7ÊÊ£Óä6Ê £Óä
14934Ê xää*,È{ÉÊÊ£Óä6Ê È
13636Ê £ä
ÇÉ
ÊÊ£Óä6Ê Ó{ä 14937Ê xää*,È{É7ÊÊ£Óx£Îä6Ê È
,]Ê ,
,iyiVÌÀÊ>«Ã £xä
Catalog Per
Number Description Case
14794Ê Îä,ÓäÊÊ£Óä6Ê Èä
14802Ê Îä,ÓäÊÊ£Îä6Ê Èä Èä
iÃÌÀ>
10471Ê {ä£É,ÊÊ£Óä6Ê È
Catalog Per
14819Ê {ä,£{É,*ÊÊ£Óä6Ê È Number Description Case
15102Ê xä
,ÎäÊÊ£Óä6Ê Ó{ 19675Ê ÈäÊÊ£Óx£Îä6Ê Óx
15107Ê xä
,ÎäÊÊ£Îä6Ê Ó{
14831Ê xä,ÓäÊÊ£Óä6Ê Èä 19690Ê £xäÊÊ£Óx£Îä6Ê £È
Electrical
14832Ê xä,ÓäÊÊ£Óx£Îä6Ê Èä
15165Ê Èx ,ÎäÉÊÊ£Óä6Ê Ó{
15160Ê Èx ,ÎäÉÉ,*ÊÊ£Óä6Ê È
15149Ê Èx ,ÎäÉ-*É,*ÊÊ£Óä6Ê È
13129Ê Èx ,ÎäÉÊÊ£Îä6Ê Ó{
15167Ê Èx ,ÎäÉÉ-É,*ÊÊ£Îä6Ê È
15100Ê Çx
,ÎäÊÊ£Óä6Ê Ó{
15101Ê Çx
,ÎäÊÊ£Îä6Ê Ó{
14840Ê Çx,ÓäÉ,*ÊÊ£Óä6Ê Ó{
15126Ê Çx ,ÉÊÊ£Óä6Ê Ó{
15125Ê Çx ,ÉÊÊ£Îä6Ê Ó{
12583Ê Çx£É,ÊÊ£Óä6Ê Ó{
14851Ê £ää ,ÉÊÊ£Óä6Ê Ó{
14847Ê £ää ,ÉÊÊ£Îä6Ê Ó{
12298Ê £ää£É,ÊÊ£Óä6Ê Ó{
14896Ê £Óä ,ÉÉ,*ÊÊ£Óä6Ê È
14899Ê £Óä ,ÉÊÊ£Îä6Ê Ó{
14911Ê £Óä ,É-*ÊÊ£Óä6Ê Ó{
14909Ê £Óä ,É-*ÊÊ£Îä6Ê Ó{
14898Ê £Óä ,É,"ÊÊ£Óä6Ê È
15166Ê £Óä
,{äÊÊ£Óä6Ê Ó{
15168Ê £Óä
,{äÊÊ£Îä6Ê Ó{
14744Ê £Óx,{äÊÊ££x£Óx6Ê Ó{
14745Ê Óxä,{äÉ{ÊÊ££x£Óx6Ê Ó{
14665Ê Óxä,{äÉ£ÊÊ££x£Óx6Ê £Ó
14663Ê Óxä,{äÉ£äÊÊ££x£Óx6Ê £Ó
14661Ê Óxä,ÎnÉÊÊ£Óä£Îä6Ê £Ó
14781Ê Îää,ÉÊÊ£Óx£Îä6Ê Ó{
14796Ê Îää,ÉÎÊÊ£Óä6Ê Ó{
14798Ê Îää,ÉÎÊÊ£Óx£Îä6Ê Ó{
14746Ê ÎÇx ,{äÊÊ£Óä6Ê Ó{
14747Ê ÎÇx,{äÉ£ÊÊ£Óä6Ê Ó{
14837Ê xää,ÉÎÊÊ£Óx£Îä6Ê Ó{
14980Ê xää,xÓÊÊ£Óx£Îä6Ê £Ó
14992Ê Çxä,xÓÊÊ£Óx£Îä6Ê £Ó
iVÀÊUÊ £ä iVÀÊUÊLi
Catalog Per Catalog Per
Number Description Case Number Description Case
13433Ê £x £äÉ ÉÓ*ÊÊ£Óä6Ê £Ó 13616Ê £x£È°x
ÊÊ£Óä£Óx6Ê Ó{
13448Ê £x £ä
É ÉÓ*ÊÊ£Óä6Ê £Ó 13617Ê £x£È°x
É7ÊÊ£Óä£Óx6Ê Ó{
13715Ê £x £äÉ/É ÉÓ*ÊÊ£Óä6Ê £Ó 13709Ê £x£È°x
É{ÊÊ£Óä6Ê Ó{
13438Ê Óx £äÉ ÉÓ*ÊÊ£Óä6Ê £Ó 13704Ê Óx£È°x
É{ÊÊ£Óä6Ê Ó{
13570Ê Óx £ä
É *ÊÊ£Óä6Ê Óää 13703Ê Óx£È°x
É7É{ÊÊ£Óä6Ê Ó{
13452Ê Óx £ä
É ÉÓ*ÊÊ£Óä6Ê £Ó 13618Ê Óx£È°x
ÊÊ£Óä£Óx6Ê Ó{
13316Ê Óx £ä
ÉÉ ÊÊ£Óä6Ê £Ó 14264Ê ÓxÓxÊÊ£Óä£Óx6Ê Ó{
14276Ê ÓxÓxÉ{ÊÊ£Óä6Ê Ó{
Electrical
13737Ê ÎÓ £ä
É
,9-/É,*ÊÊ£Óä6Ê £Ó 14265Ê ÓxÓxÉ7ÊÊ£Óä£Óx6Ê Ó{
13719Ê {ä £äÉ/É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 14277Ê ÓxÓxÉ7É{ÊÊ£Óä6Ê Ó{
13441Ê {ä £äÉ7É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 14404Ê ÓxÎäÉ7É,*ÊÊ£Óä£Îä6Ê Ó{
13720Ê {ä £äÉ7É/É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 14901Ê Óx{äÉ7ÊÊ£Óä£Îä6Ê È
13571Ê {ä £ä
É *ÊÊ£Óä£Óx6Ê Óää 13700Ê {ä£È£ÉÓ
É{ÊÊ£Óä6Ê Ó{
13456Ê {ä £ä
É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 13699Ê {ä£È£ÉÓ
É7É{ÊÊ£Óä6Ê Ó{
13457Ê {ä £ä
É7É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 13702Ê {ä£È£ÉÓ
ÊÊ£Óä£Óx6Ê Ó{
13682Ê {ä £ä
É7É/É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó 14266Ê {äÓxÊÊ£Óä£Óx6Ê Ó{
13442Ê Èä £äÉ ÉÓ*ÊÊ£Óä6Ê £Ó 14287Ê {äÓxÉ7É,*ÊÊ£Óä£Óx6Ê Ó{
13460Ê Èä £ä
É ÉÓ*ÊÊ£Óä6Ê £Ó 14267Ê {äÓxÉ7ÊÊ£Óä£Óx6Ê Ó{
13464Ê Èä £ä
ÉÉ ÉÓ*ÊÊ£Óä6Ê £Ó 14405Ê {äÎäÉ7É,*ÊÊ£Óä6Ê È
13572Ê Èä £ä
É *ÊÊ£Óä£Óx6Ê Óää 14619Ê {ä{äÉ,*ÊÊ£Óä6Ê È
14620Ê {ä{äÉ7É,*ÊÊ£Óä6Ê È
14280Ê ÈäÓxÊÊ£Óä£Îä6Ê Ó{
14261Ê ÈäÓxÉ,*ÊÊ£Óä£Îä6Ê Ó{
14406Ê ÈäÎäÉ7É,*ÊÊ£Óä£Îä6Ê È
14621Ê Èä{äÉ,*ÊÊ£Óä6Ê È
14622Ê Èä{äÉ7É,*ÊÊ£Óä6Ê È
14623Ê £ää{äÉ,*ÊÊ£Óä£Îä6Ê È
14624Ê £ää{äÉ7É,*ÊÊ£Óä6Ê È
14913Ê £xä{äÉ7ÊÊ£Óä£Îä6Ê È
iVÀÊUÊ>i
Catalog Per
Number Description Case
13435Ê £x
É
É ÉÓ*ÊÊÊ£Óä£Óx6Ê £Ó
13806Ê ÓxÊÊ£Óä£Óx6Ê Ó{
13823Ê ÓxÉ
É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó
13821Ê ÓxÉ
É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó iVÀÊUÊViÀ
13974Ê {äÊÊ£Óä£Óx6Ê Ó{ Catalog Per
13986Ê {äÉ
É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó Number Description Case
13985Ê {äÉ
É ÉÓ*ÊÊ£Óä£Óx6Ê £Ó
13496Ê Ó
£äÉ
ÉÉ ÊÊ£Óä6Ê Ó{
13993Ê ÈäÊÊ£Óä£Óx6Ê Ó{ 13497Ê Ó
n
É
ÉÉ ÊÊ£Óä6Ê Ó{
>«ÃÞÌiÊUÊ*>ÀÊ£È
Catalog Per
Number Description Case
>«ÃÞÌiÊUÊ*>ÀÊÎÈ
59030Ê Èä*,£ÈÉ
*É ÊÊ£Óä6Ê £x
59038Ê Èä*,£ÈÉ
*É ÊÊ£Îä6Ê £x Catalog Per
59032Ê Èä*,£ÈÉ
*É -*ÊÊ£Óä6Ê £x Number Description Case
59040Ê Èä*,£ÈÉ
*É -*ÊÊ£Îä6Ê £x 55090Ê ÎÈ*,ÎÈ
*É -*ÊÊ£Ó6Ê £Ó
59034Ê Çx*,£ÈÉ
*É ÊÊ£Óä6Ê £x 55100Ê ÎÈ*,ÎÈ
*É6 -*ÊÊ£Ó6Ê £Ó
59042Ê Çx*,£ÈÉ
*É ÊÊ£Îä6Ê £x 55091Ê ÎÈ*,ÎÈ
*É7ÊÊ£Ó6Ê £Ó
59036Ê Çx*,£ÈÉ
*É -*ÊÊ£Óä6Ê £x
59044Ê Çx*,£ÈÉ
*É -*ÊÊ£Îä6Ê £x
Electrical
>«ÃÞÌiÊUÊ*>ÀÊÓä
Catalog Per
Number Description Case
14464Ê Îx*,ÓäÉ
*É ÊÊ£Óä6Ê £x
>«ÃÞÌiÊUÊ*>ÀÊÎn
14459Ê Îx*,ÓäÉ
*É ÊÊ£Îä6Ê £x
14467Ê Îx*,ÓäÉ
*É -*ÊÊ£Óä6Ê £x Catalog Per
14460Ê Îx*,ÓäÉ
*É -*ÊÊ£Îä6Ê £x Number Description Case
14506Ê Îx*,ÓäÉ
*É7ÊÊ£Óä6Ê £x 14588 {x*,É
*É-*ÉÊÊ£Óä6Ê £x
14461Ê Îx*,ÓäÉ
*É7ÊÊ£Îä6Ê £x 14591 {x*,É
*É-*ÉÊÊ£Îä6Ê £x
14529Ê xä*,ÓäÉ
*É ÊÊ£Îä6Ê £x 14590 {x*,É
*É-*É -*ÊÊ£Óä6Ê £x
14528Ê xä*,ÓäÉ
*É -*ÊÊ£Îä6Ê £x 14593 {x*,É
*É-*É -*ÊÊ£Îä6Ê £x
14589 {x*,É
*É-*É-*ÊÊ£Óä6Ê £x
14592 {x*,É
*É-*É-*ÊÊ£Îä6Ê £x
14010 {x*,É
*É7ÊÊ£Îä6Ê £x
15537 {x*,ÉÉ-*ÉÉ,*ÊÊ£Óä6Ê È
15538 {x*,ÉÉ-*É-*É,*ÊÊ£Óä6Ê È
14468 Èä*,É
*É-*ÉÊÊ£Óä6Ê £x
14448 Èä*,É
*É-*ÉÊÊ£Îä6Ê £x
14469 Èä*,É
*É-*É-*ÊÊ£Óä6Ê £x
>«ÃÞÌiÊUÊ*>ÀÊÎä 14449 Èä*,É
*É-*É-*ÊÊ£Îä6Ê £x
Catalog Per 14513 Çx*,É
*É-*ÉÊÊ£Óä6Ê £x
Number Description Case 14515 Çx*,É
*É-*ÉÊÊ£Îä6Ê £x
14533Ê xä*,ÎäÉ
*ÉÊÊ£Îä6Ê £x 14516 Çx*,É
*É-*É-*ÊÊ£Îä6Ê £x
14527Ê xä*,ÎäÉ
*É ÊÊ£Óä6Ê £x 14514 Çx*,É
*É-*É-*ÊÊ£Óä6Ê £x
14531Ê xä*,ÎäÉ
*É ÊÊ£Îä6Ê £x 14510 Çx*,É
*É-*É7-*ÊÊ£Óä6Ê £x
14526Ê xä*,ÎäÉ
*É -*ÊÊ£Óä6Ê £x 14971 ä*,É
*É-*ÉÓÊÊ£Óä6Ê £x
14530Ê xä*,ÎäÉ
*É -*ÊÊ£Îä6Ê £x 14973 ä*,É
*É-*ÉÓÊÊ£Îä6Ê £x
14478Ê xä*,Îä É
*É -*ÊÊ£Îä6Ê £x 14972 ä*,É
*ÉÓ-*ÊÊ£Óä6Ê £x
14822Ê xä*,Îä É
*É -*ÉÈÊÊ£Óä6Ê È 14632 ä*,É
*É-*ÉÎÊÊ£Óä6Ê £x
14482Ê xä*,Îä É
*É -*ÊÊ£Îä6Ê £x 14630 ä*,É
*É-*ÉÎ-*ÊÊ£Óä6Ê £x
14537Ê xä*,Îä É
*É7ÊÊ£Óä6Ê £x 14579 ä*,É
*É-*ÉÊÊ£Óä6Ê £x
14486Ê xä*,Îä É
*É7ÊÊ£Îä6Ê £x 14577 ä*,É
*É-*ÉÊÊ£Îä6Ê £x
14520Ê xä*,Îä ÉÉ ÊÊ£Óä6Ê £x 14601 ä*,É
*É-*É ÊÊ£Îä6Ê £x
14509Ê xä*,Îä ÉÉ -*ÊÊ£Óä6Ê £x 14586 ä*,É
*É-*É -*ÊÊ£Óä6Ê £x
14536Ê xä*,Îä ÉÉ7ÊÊ£Óä6Ê £Ó 14587 ä*,É
*É-*É -*ÊÊ£Îä6Ê £x
14606Ê Çx*,ÎäÉ
*ÉÊÊ£Óä6Ê £x 14580 ä*,É
*É-*É-*ÊÊ£Óä6Ê £x
14629Ê Çx*,ÎäÉ
*ÉÊÊ£Îä6Ê £x 14578 ä*,É
*É-*É-*ÊÊ£Îä6Ê £x
14603Ê Çx*,ÎäÉ
*É ÊÊ£Óä6Ê £x 14602 ä*,É
*É-*É7ÊÊ£Îä6Ê £x
14627Ê Çx*,ÎäÉ
*É ÊÊ£Îä6Ê £x 14855 £Óä*,É
*É-*ÉÉÎä£Óä6Ê £x
14604Ê Çx*,ÎäÉ
*É -*ÊÊ£Óä6Ê £x 14861 £Óä*,É
*É-*ÉÉÎä£Îä6Ê £x
14628Ê Çx*,ÎäÉ
*É -*ÊÊ£Îä6Ê £x 14856 £Óä*,É
*É-*É -*É£ä£Óä6Ê £x
14769Ê Çx*,Îä É
*É ÊÊ£Óä6Ê £x 14874 £Óä*,É
*É-*É -*É£ä£Îä6Ê £x
14778Ê Çx*,Îä É
*É ÊÊ£Îä6Ê £x 14594 £Óä*,É
*É7£Óä6Ê £x
14777Ê Çx*,Îä É
*É -*ÊÊ£Îä6Ê £x
14768Ê Çx*,Îä É
*É7ÊÊ£Óä6Ê £x
14785Ê Çx*,Îä É
*É7ÊÊ£Îä6Ê £x
Electrical
58748Ê £xä+É
É
ÊÊ£Îä6Ê £Ó
58737Ê £xä+É
Ê
/®ÊÊ£Óä6Ê £Ó
58763Ê Óxä+Ê
-®ÊÊ£Óä6Ê £Ó
58765Ê Óxä+ÊÊÊ£Îä6Ê £Ó
58762Ê Óxä+É
Ê
/®ÊÊ£Óä6Ê £Ó
58764Ê Óxä+É
ÊÊ£Îä6Ê £Ó
58720Ê Óxä+É
É
Ê
--®ÊÊ£Óä6Ê £Ó
58753Ê Óxä+É
Ê
/ ®ÊÊ£Óä6Ê £Ó
58754Ê Óxä+É
ÊÊ£Îä6Ê £Ó
58767Ê xää+Ê
98®ÊÊ£Óä6Ê £Ó /ÀÕÊÊUÊ,££
58766Ê xää+É
Ê
6,®ÊÊ£Óä6Ê £Ó
Catalog Per
58756Ê xää+É
Ê
97®ÊÊ£Îä6Ê £Ó Number Description Case
58769Ê Çxä+É
Ê
9/®ÊÊ£Óä6Ê £Ó
55107Ê Óä,££ÉÎnÉÊ/®ÊÊ£Ó6Ê £ä
55113Ê Îx,££É£äÉ-*Ê/,®ÊÊ£Ó6Ê £ä
55111Ê Îx,££ÉÎnÉÊ/®ÊÊ£Ó6Ê £ä
ÕLiÊ
`ÊUÊ,-
Ê >Ãi
Catalog Per
Number Description Case
58909Ê £ää/Î+É
ÊÊ£Óä6Ê £Ó
58887Ê £ää/Î+É-É
É,*ÊÊ£Óä6Ê È
58915Ê £xä/Î+É
ÊÊ£Óä6Ê £Ó /ÀÕÊÊUÊ,£È
58917Ê Óää/Î+É
ÊÊ£Óä6Ê £Ó Catalog Per
58923Ê Îää/ΰ£x+É
Ê
®ÊÊ£Óä6Ê £Ó Number Description Case
58919Ê Îää/Î+É
É,*Ê
®ÊÊ£Óx6Ê £Ó
58942Ê Îää/{+É
Ê
*®ÊÊ£Óä6Ê £Ó 54201 Ê Óä,£ÈÉ£ÓÉ -*Ê
-8®ÊÊ£Ó6Ê Óä
54200 Ê Óä,£ÈÉÎÈÉÊ ®ÊÊ£Ó6Ê Óä
58936Ê {ää/{+É
Ê
,®ÊÊ£Óä6Ê £Ó
54204 Ê Îx,£ÈÉnÉ -*Ê, ®ÊÊ£Ó6Ê Óä
58883Ê xää/Î+Ê
<®ÊÊ£Óä6Ê £Ó 54203 Ê Îx,£È+É{äÉÊ7®ÊÊ£Ó6Ê Óä
58856Ê xää/Î+É
Ê
®ÊÊ£Óä6Ê £Ó
58902Ê xää/Î+É
ÊÊ£Îä6Ê £Ó 54208 Ê xä,£ÈÉ£ÓÉ -*Ê
8/®ÊÊ£Ó6Ê Óä
54207 Ê xä,£È+É{äÉÊ
8 ®ÊÊ£Ó6Ê Óä
58948Ê £äää/Î+É
ÊÊÓ{ä6Ê £Ó 54205 Ê xä,£È+ÉÓxÉ Ê
8<®ÊÊ£Ó6Ê Óä
58859Ê £xää/Î+É
ÊÊÓän6Ê £Ó 58564 Ê Èx,£ÈÉÊ* ®ÊÊ£Ó6Ê £ä
58857Ê £xää/Î+É
ÊÊÓ{ä6Ê £Ó 58565 Ê Èx,£ÈÉÊ*
É
9®ÊÊ£Ó6Ê £ä
58858Ê £xää/Î+É
ÊÊÓÇÇ6Ê £Ó 58563 Ê Èx,£ÈÉ -*Ê*®ÊÊ£Ó6Ê £ä
>}iÊUÊ/£ä
Catalog Per
Number Description Case ÕÕÊ,iyiVÌÀÊUÊ,Çä
18890Ê Çx/£äÉÊÊ£Óä6Ê £x
Ó°Çx¸Ê`>iÌiÀ°
18891Ê Çx/£äÉÉ
ÊÊ£Óä6Ê £x
Catalog Per
18892Ê £ää/£äÉÊÊ£Óä6Ê £x Number Description Case
18893Ê £ää/£äÉÉ
ÊÊ£Óä6Ê £x
59012Ê Óä,ÇäÉÓxÉÊÊ£Ó6Ê £ä
18894Ê £xä/£äÉÊÊ£Óä6Ê £x 59013Ê Óä,ÇäÉnÉ-*ÊÊ£Ó6Ê £ä
18895Ê £xä/£äÉÉ
ÊÊ£Óä6Ê £x
59016Ê xä,ÇäÉÓxÉ-*ÊÊ£Ó6Ê £ä
18896Ê Óxä/£äÉÊÊ£Óä6Ê £x 59017Ê xä,ÇäÉnÉ-*ÊÊ£Ó6Ê £ä
18897Ê Óxä/£äÉÉ
ÊÊ£Óä6Ê £x
Electrical
ÕÕÊ,iyiVÌÀÊUÊ,£££
{°{¸Ê`>iÌiÀ°
Catalog Per
>À}iÊ*>À Number Description Case
Catalog Per 55114Ê Îx,£££ÉÓxÉÊÊ£Ó6Ê È
Number Description Case 55102Ê Îx,£££É{É--*ÊÊ£Ó6Ê È
56211Ê xää*,xÈ+ÉÊÊ£Óä6Ê £Ó 55103Ê xä,£££ÉÓxÉÊÊ£Ó6Ê È
56210Ê xää*,xÈ+É -*ÊÊ£Óä6Ê £Ó 55104Ê xä,£££ÉnÉ-*ÊÊ£Ó6Ê È
56212Ê xää*,xÈ+É7ÊÊ£Óä6Ê £Ó 55105Ê xä,£££É{É--*ÊÊ£Ó6Ê È
56207Ê £äää*,È{+ÉÊÊ£Óä6Ê È 55123Ê Çx,£££ÉÓxÉÊÊ£Ó6Ê È
56206Ê £äää*,È{+É -*ÊÊ£Óä6Ê È 55125Ê Çx,£££ÉnÉ-*ÊÊ£Ó6Ê È
56208Ê £äää*,È{+É7ÊÊ£Óä6Ê È 55128Ê £ää,£££É{xÉ7ÊÊ£Ó6Ê È
55129Ê £ää,£££ÉnÉ-*ÊÊ£Ó6Ê È
*ÊUÊ-Ì>`>À`Ê
i>À
ÌÊÃÕÌ>LiÊvÀÊÕÃiÊÊ«iÊwÝÌÕÀið
Catalog Per
Number Description Case
58652Ê x/Î+É
ÊÊ£Ó6Ê {ä
58658Ê £ä/Î+É
ÊÊ£Ó6Ê {ä
58661Ê Óä/Î+É
ÊÊ£Ó6Ê {ä
58694Ê Óä/Î+É
É16-ÊÊ£Ó6Ê {ä
58675Ê xä/{+É
ÊÊ£Ó6Ê {ä
58676Ê xä/{+É
É16-ÊÊ£Ó6Ê {ä
58665Ê Çx/{+É,*ÊÊ£Ó6Ê È
58680Ê Çx/{+É
É16-ÊÊ£Ó6Ê {ä
Electrical
64457Ê ÓxäÉ1Ê /ÓnÊ È 64406Ê *£xäÉ
É1É
Ê
£ÇÊ Óä
64474Ê ÓxäÉ1É
/£nÊ
/£nÊ £ä 64402Ê *£xäÉ1É
Ê
£ÇÊ Óä
64490Ê {ääÉ1Ê /ÎÇÊ È 64774Ê *£ÇxÉ
É 1" 9Ê /ÓnÊ È
64492Ê {ääÉ
É1Ê /ÎÇÊ È 64405Ê *ÓxäÉ
É 1" 9Ê /ÓnÊ È
64489Ê {ääÉ
É1É /ÓnÊ /ÓnÊ È 64717Ê *{ääÉ " 9Ê /ÎÇÊ È
64488Ê {ääÉ1É /ÓnÊ /ÓnÊ È 64705Ê *{ääÉ 1" 9Ê /ÎÇÊ È
64470Ê £äääÉ
É1Ê /xÈÊ È 64706Ê *{ääÉ
É 1" 9Ê /ÎÇÊ È
64468Ê £äääÉ1Ê /xÈÊ È 64714Ê *£äääÉ 1" 9Ê /xÈÊ È
64469Ê £äääÉ1É /ÎÇÊ /ÎÇÊ È 64716Ê *£äääÉ
É 1" 9Ê /xÈÊ È
64431Ê £xääÉ 1",Ê /xÈÊ È
Catalog Per
iÌ>>ÀVÊ->vii Number Description Case
-iviÝÌ}ÕÃ
}ÊvÊÕÌiÀÊ>ViÌÊÃÊLÀi° 69510Ê -"8£n7Ê Óx
Catalog Bulb Per 69511Ê -"8Îx7Ê Óx
Number Description Type Case 69512Ê -"8xx7Ê Óx
64707Ê /{ääÉ 1" 9Ê /ÎÇÊ È 69513Ê -"8ä7Ê £Ó
64709Ê /{ääÉ
É 1" 9Ê /ÎÇÊ È 69514Ê -"8£Îx7Ê £Ó
64718Ê /£äääÉ 1" 9Ê /xÈÊ È 69515Ê -"8£nä7Ê
-Ì>`>À`ÊÕ>ÕÝ
}
ÊivwViVÞ]ÊÜÊVÀÊÀi`iÀ}°Ê
1>ÕÝ
Catalog Bulb Per ÕÃÌÊLiÊ«iÀ>Ìi`ÊÊiÀVÕÀÞÊÛ>«ÀÊ>}
Number Description Type Case ÀÊÀi>VÌÀÊL>>ÃÌÃÊÞ°
67500Ê 1ÎxÉ
Ê
£ÇÊ Óä
Catalog Bulb Per
67501Ê 1ÎxÉÉ
Ê
£ÇÊ Óä Number Description Type Case
67510Ê
Electrical
1xäÊ
/ÓΰxÊ Óä
67511Ê 1xäÉÊ
/ÓΰxÊ Óä 67528Ê 18£xäÊ /ÓnÊ £ä
67503Ê 1xäÉÉ
Ê
£ÇÊ Óä 67530Ê 18Ó£xÊ /ÓnÊ £ä
67502Ê 1xäÉ
Ê
£ÇÊ Óä
67531Ê 18ÎÈäÊ /ÎÇÊ £ä
67512Ê 1ÇäÊ
/ÓΰxÊ Óä
67513Ê 1ÇäÉÊ
/ÓΰxÊ Óä 67318Ê 18nnäÊ
ÓxÊ È
67505Ê 1ÇäÉÉ
Ê
£ÇÊ Óä
67504Ê 1ÇäÉ
Ê
£ÇÊ Óä
67514Ê 1£ääÊ
/ÓΰxÊ Óä
67515Ê 1£ääÉÊ
/ÓΰxÊ Óä
67507Ê 1£ääÉÉ
Ê
£ÇÊ Óä
67506Ê 1£ääÉ
Ê
£ÇÊ Óä
67518Ê 1£xäÉ£ääÊ /ÓnÊ £ä -Ì>`>À`ÊiÀVÕÀÞ
67516Ê 1£xäÉxxÊ
/ÓΰxÊ Óä `ÊivwViVÞ]Ê`iÀ>ÌiÊVÀÊÀi`iÀ}°Ê
67517Ê 1£xäÉxxÉÊ
/ÓΰxÊ Óä
67509Ê 1£xäÉxxÉÉ
Ê
£ÇÊ Óä Catalog Bulb Per
67508Ê 1£xäÉxxÉ
Ê
£ÇÊ Óä Number Description Type Case
67576Ê 1ÓääÊ
/£nÊ Óä 69400Ê {xÉ{È{äÉxäÉ8Ê
£ÇÊ Óä
67578Ê 1ÓxäÊ
/£nÊ Óä 69428Ê {Î6ÇxÉ8Ê
£ÇÊ £Ó
67521Ê 1ÓxäÉÊ
/£nÊ £ä
69403Ê În6£ääÉ8Ê
£ÇÊ Óä
67580Ê 1ΣäÊ
/£nÊ Óä 69405Ê În *£ääÉ8Ê ,{äÊ £ä
67533Ê 1{ääÊ
/£nÊ Óä 69407Ê În/£ääÊ
/ÓΰxÊ Óä
67524Ê 1{ääÉÊ /ÎÇÊ £ä 69429Ê În£ääÉ8Ê
/ÓΰxÊ £Ó
68843Ê {{-£ääÉ8Ê *,ÎnÊ £Ó
67614Ê 1ÈääÊ-1*
,Ê /£ÈÊ £ä 68846Ê {{-£ääÉ-Ê *,ÎnÊ £Ó
67547Ê 1ÇxäÊ /ÎÇÊ È 68844Ê {{£ääÊ *,ÎnÊ £Ó
67307Ê 1£äääÊ
ÓxÊ È 69406Ê Î *£ÇxÉ8Ê ,{äÊ £ä
69430Ê Î £ÇxÊ /ÓnÊ £Ó
69431Ê Î
£ÇxÉ8Ê /ÓnÊ £Ó
69447Ê ÎÇ ÓxäÊ /É
ÓnÊ È
69448Ê ÎÇ
ÓxäÉ8Ê /É
ÓnÊ È
Õ>ÕÝÊUÊ-Ì>`LÞ 68893Ê ÎÎ,{ääÊ /£ÈÊ È
ÃÌ>ÌÊÀiÃÌ>ÀÌÊV>«>LÌÞ 69449Ê ÎÎ
{ääÊ /É
ÎÇÊ È
Catalog Bulb Per 69450Ê ÎÎ{ääÉ8Ê /É
ÎÇÊ È
Number Description Type Case 69451Ê ÎÎ/{ääÉ8Ê->vii® (1)Ê /ÎÇÊ È
67540Ê 1ÇäÉ- 9Ê
/ÓΰxÊ Óä 69332Ê Î{7£äääÉ8Ê /xÈÊ È
67542Ê 1£ääÉ- 9Ê
/ÓΰxÊ Óä 69307Ê ÎÈ6£äääÊ /xÈÊ È
69331Ê ÎÈ7£äääÉ8Ê /xÈÊ È
67544Ê 1£xäÉxxÉ- 9Ê
/ÓΰxÊ Óä
NOTE: (1)
-ivÊiÝÌ}ÕÃ
}°
67584Ê 1{ääÉ- 9Ê
/£nÊ Óä
67543Ê 1£äääÉ- 9Ê
/ÓxÊ È
ÕÀiÃViÌÊ>«Ê
ÀÃ ÝÌÕÀiÊ
«>ÀÃÊ>Ì>
Color Correlated Color Rendering {>«ÊwÝÌÕÀiÃÊÜÌ
Ê«>ÃÌVÊið
Color Abbreviation Color Temp. (1) Index (2) Lamp Ballast Relative Light
Ê
«>VÌÊÕÀiÃViÌÊÓÇääÊ nÓÇÊ Ó]ÇääÊ nÓ Type Ballast Factor (1) Watts utput (RL ) (2) RL /W
Ê V>`iÃViÌÊÕÀiÃViÌÊ Ê Ó]ÇxäÊ n
{ä
7Ê -Ì`°Ê>}iÌVÊ °xÊ £Ç{Ê £ääÊ £ää
Ê -vÌÊ7
ÌiÊ -vÌÊ7
ÌiÊ Ó]ääÊ nÓ {äÉ
7É--Ê -Ì`°Ê>}iÌVÊ °äÊ £xxÊ äÊ £ä£
Ê iÕÝiÊ7>ÀÊ7
ÌiÊ 778Ê Ó]xäÊ Ç{ {äÉn{£É--Ê -Ì`°Ê>}iÌVÊ °äÊ £xxÊ xÊ £äÇ
Ê iÃ}iÀʸnää¸ÊÎäääÊ nÎäÊ Î]äääÊ nä {äÉn{£É--*Ê -Ì`°Ê>}iÌVÊ °äÊ £{{Ê ÎÊ ££Î
Ê iÃ}iÀÊÎäääÊ ÎäÊ Î]äääÊ Çä {ä
7Ê
°-°Ê>}iÌVÊ °xÊ £ÈÓÊ £ä£Ê £än
Ê ÌiÀÀÊiÃ}Ê ÎäÊ Î]äääÊ Çä {äÉ
7É--Ê
°-°Ê>}iÌVÊ °nnÊ £ÎÊ nÊ ££ä
Ê 7>ÀÊ7
ÌiÊ 77Ê Î]äääÊ xÓ
{äÉn{£É--Ê
°-°Ê>}iÌVÊ °nnÊ £ÎÊ ÎÊ ££È
Ê "VÌÀ ʸÇää¸ÊÎäääÊ ÇÎäÊ Î]äääÊ Çx
Ê "VÌÀ ʸnää¸ÊÎäääÊ nÎäÊ Î]äääÊ nÓ {äÉn{£É--*Ê
°-°Ê>}iÌVÊ °nnÊ £Î£Ê £Ê £ÓÓ
Ê ÀÕÝ Ê7`iÊ-«iVÌÀÕÊ ,"É7-Ê Î]{ääÊ n {äÉ
7É--Ê
iVÌÀVÊ °ÇxÊ ££Ê nÈÊ £Óx
Ê 7
ÌiÊ 7Ê Î]{xäÊ xÇ {äÉn{£É--Ê
iVÌÀVÊ °ÇxÊ ££Ê ÎÊ £ÎÈ
Electrical
Ê "VÌÀ ʸÇää¸ÊÎxääÊ ÇÎxÊ Î]xääÊ Çx äÎÓÊ"VÌÀ Ê /nÊ>}iÌVÊ °xÊ £ÎÓÊ £ä{Ê £ÎÇ
Ê "VÌÀ ʸnää¸ÊÎxääÊ nÎxÊ Î]xääÊ nÓ
äÎÓÊ"VÌÀ Ê /nÊ
iVÌÀVÊ °ÓÊ £äÈÊ £ä£Ê £ÈÈ
Ê iÃ}iÀʸnää¸ÊÎxääÊ nÎxÊ Î]xääÊ nä
Ê iÃ}iÀÊÎxääÊ ÎxÊ Î]xääÊ Çä NOTE: ÊÊ>Ì>ÊÀ>âi`ÊÌÊL>>ÃÌÊv>VÌÀÃÊÃ
ÜÊÊÌ
ÃÊVÕÊvÀÊ>}iÌVÊL>>ÃÌð
(1)
Ê >ÌÕÀ>Ê7
ÌiÊ Ê Î]ÈääÊ nÈ
Ê "VÌÀ ʸÇää¸Ê{£ääÊ Ç{£Ê {]£ääÊ Çx NOTE: (2)ÊÊ,i>ÌÛiÊ}
ÌÊÕÌ«ÕÌÊ,"®ÊL>Ãi`ÊÊÌ>Ê£ääÊ
ÕÀ®ÊÀ>Ìi`Ê>«ÊÕiÊÕÌ«ÕÌ°
Ê "VÌÀ ʸnää¸Ê{£ääÊ n{£Ê {]£ääÊ nÓ
Ê iÃ}iÀʸnää¸Ê{£ääÊ n{£Ê {]£ääÊ nä
Ê iÃ}iÀÊ{£ääÊ {£Ê {]£ääÊ Çä
Ê iÕÝiÊ
Ê7
ÌiÊ
78Ê {]£ääÊ n
Ê ÌiÊ7
ÌiÊ 7Ê {]£xäÊ {n ÕÀiÃViÌÊ À>`Ê >iÊÕ`i
Ê
Ê7
ÌiÊ
7Ê {]ÓääÊ ÈÓ /
iÃiÊÌ>LiÃÊ>ÀiÊÌi`i`ÊÞÊ>ÃÊ>Ê}Õ`iÊ>`Ê>ÞÊÀi«ÀiÃiÌÊ>Ì
iÀÊ>«Ê
V«>Þ¿ÃÊVÃiÃÌÊiµÕÛ>iÌÊÀ>Ì
iÀÊÌ
>Ê>Ê`iÌV>Ê>ÌV
°
Ê iÃ}Êxä Ê - xäÊ x]äääÊ ä
Ê "VÌÀ ʸÇää¸ÊxäääÊ ÇxäÊ x]äääÊ Çx SRAM
Ê "VÌÀ ʸää¸ÊxäääÊ xäÊ x]äääÊ ä S L ANIA INC. E PHILIPS
Ê >Þ}
ÌÊ Ê È]xääÊ ÇÈ Ê
ÕÀÛ>Õi "1
Ê 1 iÌ
Ê iÃ}iÀʸnää¸ÊÈxääÊ nÈxÊ È]xääÊ nä Ê iÃ}Êxä
À>ÊxäÊ
ÀÌiÊxä
Ê >Þ}
ÌÊiÕÝiÊ 8Ê È]xääÊ nn Ê iÃ}iÀ -iÀià -«iVwV>ÌÊ-iÀiÃÊ -*
Ê-iÀiÃ
Ê iÃ}iÀ ¸nää¸Ê-iÀià -*8Ê 1ÌÀ>Õi
NOTE: (1)
"",Ê/
*
,/1,
ÆÊÊ/
iÊVÀÊÌi«iÀ>ÌÕÀiÊvÊ>Ê}
ÌÊÃÕÀVi]ÊiÝ«ÀiÃÃi`Ê Ê ÕÕÝÊ
«>ÝÒÊ -£nÊ
>ÀÌ
Ê}
Ì
ÊiÛÃÊ®]Ê`iÃVÀLiÃÊÌ
iÊ>««>ÀiÌÊÜ
ÌiiÃÃÊvÊÌ
iÊ>«°ÊÊÜÊVÀÊÌi«iÀ>ÌÕÀiÃÊ>ÀiÊ Ê ÀÕÝ ¸ÀÊ>`Ê-
¸Ê }ÀÌi
¸Ü>À¸ÊÊVÀÊ>`Ê
}
ÊVÀÊÌi«iÀ>ÌÕÀiÃÊ>ÀiʸV¸ÊÊVÀ°ÊÊ/
iÊVÀÊÌi«iÀ>ÌÕÀiÊvÊ Ê ÌiÀÀÊiÃ}ÊÎä®Ê -*ÊÎäÊ -vÌiÊ*>ÃÌiÊÊ-*
ÊÎä®
Ì
iÊ}
ÌÊÃÕÀViÊVÌÀLÕÌiÃÊ}Ài>ÌÞÊÌÊÌ
iÊÛÃÕ>Ê>««i>À>ViÊvÊÌ
iÊ}
Ìi`Êë>Vi° Ê "VÌÀ Ê /ÀiÊ /ÇäÉ/nä
Ê -Õ«iÀ->ÛiÀ Ê 7>ÌÌÃiÀ Ê
V7>ÌÌ
NOTE: (2)
"",Ê,
, Ê
8Ê
,®ÆÊÊ
,]ÊvÀÊä£ää]ÊiÝ«ÀiÃÃiÃÊÌ
iÊ`i}ÀiiÊÌÊ Ê -Õ«iÀ->ÛiÀÊ*ÕÃ Ê 7>ÌÌÃiÀ Ê*ÕÃÊ ÊÊÊÊÊq
Ü
V
ÊVÀÃÊÜÊ>««i>ÀʸÊ>ÌÕÀ>¸ÊÕ`iÀÊÌ
iÊ}
ÌÊÃÕÀViÊLi}ÊÃiiVÌi`°ÊÊ/
iÊ
}
iÀÊÌ
iÊ Ê ÕÕÝÊ-Ê >ÝÒÊ *
,ÊÕLiÀ]ÊÌ
iÊLiÌÌiÀÊÌ
iÊVÀÊÀi`iÀ}Ê«À«iÀÌiÃÊvÊÌ
iÊ}
ÌÊÃÕÀVi°ÊÊ/
iÊVÀÊÀi`iÀ Ê ÕÕÝÊÊ ÕLiÊ >ÝÒÊ *
ÕÀiÃViÌÊ>«Ê
ÀÊ
ÀÃÃÊ,iviÀiVi Ê À>`Ê >iÊÕ`i
SRAM SRAM
S L ANIA INC. E PHILIPS S L ANIA INC. E PHILIPS
Ê Îä -*ÎäÊ -«iVÊÎä Ê Õ>ÕÝ ÕV>ÕÝ Ê
iÀ>>ÕÝ
Ê Îx -*ÎxÊ -«iVÊÎx
Ê Õ>ÕÝ -Ì>`LÞ -Ì>`LÞÊÕV>ÕÝ Ê ÃÌ>ÌÊ,iÃÌÀiÊ
iÀ>>ÕÝ
D41 -*{£Ê -«iVÊ{£
Ê nÎä -*8ÎäÊ Îä1 Ê iÌ>>ÀV ÕÌ6>«À iÌ>Ê>`i
Ê nÎx -*8ÎxÊ Îx1 Ê iÌ>>ÀV *À/iV
*, ÊÊÊÊÊq
Ê n{£ -*8{£Ê {£1 Ê iÌ>>ÀV ->vii ->v/Õ>À` ÊÕÌ6>«À ->viÌÞÊvi}Õ>À`ÊiÌ>Ê>`i
Ê - xä
xäÊ
xä Ê -Õ«iÀÊiÌ>>ÀV }
Ê"ÕÌ«ÕÌÊÕÌ6>«À iÌ>Ê>`i
Ê nÓÇÊ -*8ÓÇÊ ÓÇ Ê 1>ÕÝ
<ÊÕÝ ¸
VÕݸ
Ê 778 -7Ê 778 Ê ÀÌii + /
Ê - xä - Ê
xä Ê + + /
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
,AS 6EGAS &AX s "ENICIA &AX
C-54
6"/,
Ê/1
Ê1*-ÊUÊȸÊ
Ê-*
1>«ÃÊvviÀÊÃiÛiÀ>Ê>`Û>Ì>}iÃÊvÀÊÕ>Ì}ÊiiVÌÀVÊÃ}ÃÊÃÕV
Ê>ÃÊiÃÃÊÀ>ViÜ>ÞÊÜÀ]ÊÛiÀÃ>ÌÌÞÊ
Ê}
Ì}ÊVÀiÀÃÊ>`ÊVÕÀÛiÃ]ÊÃ
ÀÌiÀÊÜÀiÊi}Ì
ÃÊ>`ÊvÌi]ÊviÜiÀÊ>«Ã°
Catalog Height Lamp Weight
Number "A" Watts Lumens Per Case Per Case
Ê /1ÈÓ{
7"Ê £ä°xÊ ÎÈÊ £]ÈääÊ ÈÊ {
Ê /1ÈÓ{"Ê £ä°xÊ ÎÈÊ £]ÎÓnÊ ÈÊ {
Ê /1ÈÎÈ
7"Ê £È°xÊ {nÊ Ó]ÇxäÊ ÈÊ x
Ê /1ÈÎÈ"Ê £È°xÊ {nÊ Ó]ÎääÊ ÈÊ x
Ê /1È{n
7"Ê ÓÓ°xÊ ÈäÊ {]äääÊ ÈÊ Ç
Ê /1È{n"Ê ÓÓ°xÊ ÈäÊ Î]ÎääÊ ÈÊ Ç
Ê /1ÈÈä
7"Ê Ón°xÊ ÇxÊ x]£ÓxÊ ÈÊ
Ê /1ÈÈä"Ê Ón°xÊ ÇxÊ {]ÓxäÊ ÈÊ
Ê /1ÈÇÓ
7"Ê Î{°xÊ nÇÊ È]£ÓxÊ ÈÊ ££
Ê /1ÈÇÓ"Ê Î{°xÊ nÇÊ x]£ääÊ ÈÊ ££
Ê /1Èn{
7"Ê {ä°xÊ £ääÊ Ç]{ääÊ ÈÊ £Ó
Ê /1Èn{"Ê {ä°xÊ £ääÊ È]£xäÊ ÈÊ £Ó
Ê /1ÈÈ
7"Ê {È°xÊ ££ÓÊ n]ÇxäÊ ÈÊ £{
Ê /1ÈÈ"Ê {È°xÊ ££ÓÊ Ç]ÓxäÊ ÈÊ £{
Electrical
Ê /1È£Óä
7"Ê xÇ°äÊ £ÎÓÊ £ä]ÈxäÊ ÈÊ £È
Ê /1È£Óä"Ê xÇ°äÊ £ÎÓÊ n]nääÊ ÈÊ £È
6"/,
Ê/1
Ê1*-ÊUʸÊ
Ê-*
Catalog Height Lamp Weight
Number "A" Watts Lumens Per Case Per Case
Ê /1ÎÈ
7"Ê £x°nÊ {nÊ Ó]ÇxäÊ ÈÊ È
Ê /1ÎÈ"Ê £x°nÊ {nÊ Ó]ÎääÊ ÈÊ È
Ê /1{n
7"Ê Ó£°nÊ ÈäÊ {]äääÊ ÈÊ n
Ê /1{n"Ê Ó£°nÊ ÈäÊ Î]ÎääÊ ÈÊ n
Ê /1Èä
7"Ê ÓÇ°nÊ ÇxÊ x]£ääÊ ÈÊ £ä
Ê /1Èä"Ê ÓÇ°nÊ ÇxÊ {]ÓxäÊ ÈÊ £ä
Ê /1ÇÓ
7"Ê ÎΰnÊ nÇÊ È]£ÓxÊ ÈÊ £Ó
Ê /1ÇÓ"Ê ÎΰnÊ nÇÊ x]£ääÊ ÈÊ £Ó
Ê /1n{
7"Ê Î°nÊ £ääÊ Ç]{ääÊ ÈÊ £Î
Ê /1n{"Ê Î°nÊ £ääÊ È]£xäÊ ÈÊ £Î
Ê /1È
7"Ê {x°nÊ ££ÓÊ n]ÇxäÊ ÈÊ £x
Ê /1È"Ê {x°nÊ ££ÓÊ Ç]ÓxäÊ ÈÊ £x
Ê /1£Óä
7"Ê xÈ°nÊ £ÎÓÊ £ä]ÈxäÊ ÈÊ £n 1>«
Ê /1£Óä"Ê xÈ°nÊ £ÎÓÊ n]nääÊ ÈÊ £n Mounted in
FT 6-H or FT 9-H Base
Electrical
Catalog
Number Description Length
Ê ,"
££{Ê
>}iÀÊvÀÊÃÌÊV>`iÃViÌÊ>«ÃÊÊÊ {¿
Ê ,",ÎnÊ
>}iÀÊvÀÊ i>`i`Ê>ViÊ*,ÎnÊ>«ÃÊÊÊ {¿
Ê ," ,££{Ê(2) V>`iÃViÌÊ>«Ê >ÃiÊ,iÛiÀÊ _
,"
££x
w/,"8{{{ÊÀÊ,"8ÈÈÈ
extension
,",În ,"
££{
,"
££{ ,"
££{ ,",În w/," 8££{ w/," 8££{
Engaging small bulb Engaging large bulb Engaging rim of beaded PAR3 lamp extensions extensions
*Ê-
6
-
/
iÃiÊÌÀ>ë>ÀiÌÊ«ÞV>ÀL>ÌiÊ«>ÃÌVÊ>«ÊÃiiÛiÃÊwÌÊÛiÀÊÌ
iÊ>«ÊÌÊ«ÀiÛiÌÊyÞ}Ê
}>ÃÃÊvÊLÀi>>}iÊVVÕÀðÊÊ-iiÛiÃÊ>ÀiÊ>ÃÊ>ÊiVV>ÊÜ>ÞÊÌÊivviVÌÊVÀi`Ê}
Ì}°ÊÊ
>V
ÊÃiiÛiÊÃÊȸÊ}Ê>`Ê>ÞÊLiÊVÕÌÊÌÊÃâiÊV«iÌiÊÜÌ
ÊÌÜÊi`ÊV>«Ã°ÊÊ>ÞÊLiÊ
ÕÃi`ÊÊ/£ÓÊ"ÊÀÊ6"Ê>«ÃÊÜ
iÊwÌÌi`ÊÜÌ
Ê**-/£ÓÊ
i>ÌÊÃÊÃVÀiiÃÊ>ÌÊ
i>V
Êi`°
Catalog Put
Number Description p
Ê **È
Ê n¿Ê/£ÓÊ
ÀiÃÃÊ>«Ê-iiÛiÊÜÉ
>«ÃÊ Ó{
Ê **È Ê n¿Ê/£ÓÊ ÕiÊ>«Ê-iiÛiÊÜÉ
>«ÃÊ Ó{
Ê **È,Ê n¿Ê/£ÓÊÀiiÊ>«Ê-iiÛiÊÜÉ
>«ÃÊ Ó{
Ê **ÈÊ n¿Ê/£ÓÊ`Ê>«Ê-iiÛiÊÜÉ
>«ÃÊ Ó{
Ê **È,Ê n¿Ê/£ÓÊ,i`Ê>«Ê-iiÛiÊÜÉ
>«ÃÊ Ó{
Ê **/£Ó
Ê
ÝÌÀ>Ê/£ÓÊ
`Ê
>«Ê £
Ê **-/£ÓÊ /£ÓÊi>ÌÊ-Ê-VÀiiÊ £
Ê **È
/nÊ n¿Ê/nÊ
ÀiÃÃÊ>«Ê-iiÛiÊÜÉ
>«ÃÊ {n
Ê **/n
Ê
ÝÌÀ>Ê/nÊ
`Ê
>«Ê Èä
1£x{n£ÊÊ 1£x{nÓ
ÊxnÓ ÕÌÌ"]ʸ¸Ê->«Ê É*ÊÊ -Ê ÓääÊÊ Ê
ÊxnÎ ÕÌÌ"]ʸ¸Ê->«Ê É*ÊÊ /Ê ÓääÊÊ Ê
Ê1£x{n£ /LÃÌi]Ê Ì"]ÊÀâ°Ê
Ì>VÌÊ ÊÊ /Ê ÓxÉÓxä
Ê1£x{nÓ /LÃÌi]Ê Ì"]ÊÀâ°Ê
Ì>VÌÊ ÊÊ -Ê ÓxÉÓxä
Ê1£x{Ç£Ê(2) /LÃÌi]Ê Ì"]Ê}
Ê*ÀwiÊ ÊÊ /Ê ÓxÉÓxä 1£x{Ç£ 1£x{ÇÓ
Ê1£x{ÇÓÊ(2) /LÃÌi]Ê Ì"]Ê}
Ê*ÀwiÊ ÊÊ -Ê ÓxÉÓxä
Ê1x{ä Ê ÕÌÌ"]Ê Ìi`]Ê-VÀiÜ"Ê ÊÊ /Ê ÓxÉÓxä
Ê1x{£ Ê ÕÌÌ"]Ê Ìi`]Ê-VÀiÜ"Ê ÊÊ -Ê ÓxÉÓxä
NOTE: (1)
ÊiÌ>ÊV«°ÊÊÊ(2)Ê}
Ê«ÀwiÊvÀÊ/£ÇÊ>«Ã°
1x{ä 1x{£
1",
-
/Ê- Ê-
Ê*"
,-
,>Ìi`Ê£äää6ÉÈÈä7°ÊÊ7
ÌiÊÊVÀÊÜÌ
ʸ]Ê£n7]Ê7Ê£äää6Êi>`ð
¸¸Ê«>ÌÌiÀÊÌ}ÊvÀʸ¸Ê«>iÊVÕÌÕÌÊÃÊÃ
ÜÊÊ
>À`Ü>ÀiÊÃiVÌÊÕ`iÀÊE Ê*ÕV
Ê/}°
Catalog asket/ Stationary/ Put 1xÎÓ£ 1xÎÓÓ
Number Description Pitch Telescopic p
Ê 1xÎÓ£Ê /LÃÌi]ʸ¸Ê->«Ê É*Ê /Ê ÓxÉÓää
Ê 1xÎÓÓÊ /LÃÌi]ʸ¸Ê->«Ê É*Ê -Ê ÓxÉÓää
1xn{ÊÊ 1xnx
Ê 1xn{Ê ÕÌÌ"]ʸ¸Ê->«Ê É*Ê -Ê ÓxÉÓxä
Ê 1xnxÊ ÕÌÌ"]ʸ¸Ê->«Ê É*Ê /Ê ÓxÉÓxä
Ê 1£xÇxÊ /LÃÌi]Ê ÕÌÌ"Ê É*Ê /Ê ÓxÉÓxä
Ê 1£xÇÈÊ /LÃÌi]Ê ÕÌÌ"Ê É*Ê -Ê ÓxÉÓxä 1£xÇxÊ 1£xÇÈ
Ài`ÊÜ
ÌiÊiÝVi«ÌÊÜ
iÀiÊÌi`ÊUÊ,>Ìi`ÊÈää6ÉÈÈä7ÊiÝVi«ÌÊÜ
iÀiÊÌi`°
Catalog verall Height Lamp Put
Number Description Mounting (Inches) (3) Retention Termination Hardware p
Ê 1£xxäÓä*Ê /LÃÌiÊ ÓäÊ>Õ}iÊ-`i"Ê Ó°£{Ê /ÕÀVÊ +ÕVÜÀiÊ ÈÎÓÊ*>ÕÌÊ £ääÉ£]äää
Ê 1£xx£*Ê /LÃÌiÊ -VÀiÜ"Ê Ó°£{Ê /ÕÀVÊ +ÕVÜÀiÊ ÈÎÓÊ*>ÕÌÊ £ääÉ£]äää
Ê 1£ÈääÓäÊ /LÃÌi]ÊÃViVÌÊ ÓäÊ>Õ}iÊ-`i"Ê £°ÈÇÊ /ÕÀVÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Ê 1£ÈäxÊ ÕÌÌ"Ê À>ViÌÊ Ê /ÜÃÌÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Ê 1£Èäx ,nÊ ÕÌÌ"Ê nÊ À>ViÌÊ Ê /ÜÃÌÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Ê 1£È£xÓäÊ /LÃÌi]ÊvÀʸ1¸Ê>«ÃÊ ÓäÊ>Õ}iÊ-`i"Ê £°È£Ê -ÌÀ>}
ÌÊÃiÀÌÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Ê 1£ÈÇä Ê(1, 2) ÕÌÌ"]Ê>ÌÕÀiÊ/xÊ -VÀiÜ"Ê °ÇÓÊ /ÕÀVÊ È¸Êi>`ÃÊ Ê £ääÉ£]äää
Ê 1£ÈÇä7 ,£Ê(1) ÕÌÌ"]Ê>ÌÕÀiÊ/xÊ £Ê À>ViÌÊ °ÇÓÊ /ÕÀVÊ +ÕVÜÀiÊ Ê £ääÉ£]äää
Ê 1£Ç£äÓä*Ê /LÃÌiÊ ÓäÊ>Õ}iÊ-`i"Ê £°nÊ /ÕÀVÊ +ÕVÜÀiÊ ÈÎÓÊ*>ÕÌÊ £ääÉ£]äää
Ê 1£Ç£Ç
/Ê /LÃÌi]ÊÜ*ÀwiÊ £nÉÓäÊ>Õ}iÊ-`i"Ê £°È£Ê -ÌÀ>}
ÌÊÃiÀÌÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Ê 1£nää
Ê /LÃÌi]ÊÜ*ÀwiÊ £nÉÓäÊ>Õ}iÊ-`i"Ê £°ÈÇÊ -ÌÀ>}
ÌÊÃiÀÌÊ +ÕVÜÀiÊ Ê £ääÉ£]Óxä
Electrical
Ê 1£nä£*Ê /LÃÌi]ÊÜ*ÀwiÊ Ì"Ê £°ÈÇÊ /ÕÀVÊ +ÕVÜÀiÊ ÈÎÓÊ*>ÕÌÊ £ääÉ£]Óxä
Ê 1x{ÓÊ ÕÌÌ"]Ê/iiÃV«VÊ -VÀiÜÃÊ Ê -«À}Ê ¸Êi>`ÃÊ(4)Ê ÈÎÓÊÝÊ£É{Ê-VÀiÜÃÊ £ääÉ£]äää
Ê 1x{ÎÊ ÕÌÌ"]Ê-Ì>Ì>ÀÞÊ -VÀiÜÃÊ Ê -«À}Ê ¸Êi>`ÃÊ(4)Ê ÈÎÓÊÝÊ£É{Ê-VÀiÜÃÊ £ääÉ£]äää
Ê 1xä7Ê ÕÌÌ"Ê -VÀiÜÃÊ Ê /ÜÃÌÊ ¸Êi>`ÃÊ(4)Ê {ÎÈÊÝÊÎÉnÊ-VÀiÜÃÊ £ääÉ£]äää
Ê 1xä7-
Ê ÕÌÌ"Ê -VÀiÜÃÊ Ê /ÜÃÌÊ ¸Êi>`ÃÊ(4)Ê -«À}Ê
«Ê £ääÉ£]äää
Ê 1x£/£ÓÊ ÕÌÌ"]Ê,}
ÌÊ
`]Ê/£ÓÊ À>ViÌÊ Ê -`iÊ
ÌÀÞÊ ¸Êi>`ÃÊ(4)Ê Ê £ääÉ£]äää
Ê 1x£,/£ÓÊ ÕÌÌ"]ÊivÌÊ
`]Ê/£ÓÊ À>ViÌÊ Ê -`iÊ
ÌÀÞÊ ¸Êi>`ÃÊ(4)Ê Ê £ääÉ£]äää
Ê 1x{Ê ÕÌÌ"Ê -VÀiÜ"Ê Ê /ÜÃÌÊ ¸Êi>`ÃÊ(4)Ê Ê ÓxÉÇää
Ê 1x{ ,ÎÊ ÕÌÌ"Ê ÎÊ À>ViÌÊ Ê /ÜÃÌÊ ¸Êi>`ÃÊ(4)Ê Ê £ääÉxää
Ê 1xÈ Ê(2) -Ì>ÀÌiÀÊ-ViÌÊ -VÀiÜ"Ê Ê Ê ¸Êi>`ÃÊ(4)Ê ÈÎÓÊÝÊ£É{Ê-VÀiÜÃÊ £ääÉ£]äää
Ê 1xÇ7Ê -Ì>ÀÌiÀÊ-ViÌÊ -VÀiÜ"Ê Ê Ê ¸Êi>`ÃÊ(4)Ê {ÎÈÊÝÊÎÉnÊ-VÀiÜÃÊ £ääÉxää
Ê 1xÇ Ê(2) -Ì>ÀÌiÀÊ-ViÌÊ -VÀiÜ"Ê Ê Ê ¸Êi>`ÃÊ(4)Ê {ÎÈÊÝÊÎÉn -VÀiÜÃÊ £ääÉxää
Ê 1xÇ -
Ê(2) -Ì>ÀÌiÀÊ-ViÌÊ -
Ê À>ViÌÊ Ê Ê ¸Êi>`ÃÊ(4)Ê ÈÎÓÊÝÊ£É{Ê-VÀiÜÃÊ £ääÉxää
NOTE: (1)
Ê,>Ìi`\ÊÓxä6ÉÇx7°ÊÊÊÊÊ(2)Ê >VÊÊÊÊÊ(3)Ê««i`ÊÌÊÌLÃÌiÊÌÞ«i°ÊÊÊÊÊ(4)Êi>`ÃÊ>ÀiÊ£n7]Ê7ÊÈää6]Ê£äxc
°
6/" Ê1",
-
/Ê8/1,
Ê * Ê*"
,-
7
ÌiÊ>«
`iÀÃÊÀ>Ìi`ÊÈää6ÉÈÈä7°ÊÊ"Ì
iÀÊÌÞ«iÃÊ>ÃÊ>Û>>Li°
Catalog Overall Height Lamp Put
Number Description Mounting (Inches) (1) Retention Termination Hardware Up
Ê
6Îä£7Ê /LÃÌiÊ Ì"Ê Ó°{{Ê /ÜÃÌÊ -VÀiÜÊ/iÀ>ÃÊ ÈÊÊÎÓÝÇÉnÊ-VÀiÜÊ £äÉxä
Ê
6Σ£7Ê /LÃÌiÊ Ì"Ê Ó°{{Ê(2)Ê /ÜÃÌÊ -VÀiÜÊ/iÀ>ÃÊ ÈÊÊÎÓÝÇÉnÊ-VÀiÜÊ £äÉxä
Ê
6Îx (3) ¸Êi>`ÃÊ(4)Ê
Electrical
6/" Ê1",
-
/Ê8/1,
Ê-ÊEÊ"Ê*"
,-
7
ÌiÊ>«
`iÀÃÊÀ>Ìi`ÊÈää6ÉÈÈä7°ÊÊ"Ì
iÀÊÌÞ«iÃÊ>ÃÊ>Û>>Li°
6ÓxÎÈÊÊÊÊÊÊÊ
6ÓxÎÇ
1*Ç-Ó
Electrical
1*Ç 1*£Î 1xx 1*£Î-Ó
Ê*"
,-ÊUÊ"1Ê*"
,-
Catalog Put
Number Body Description Application Base Mounting Termination Rating p
Ê
6nÈÇnÊ *ÀVi>Ê Ê
ÝVi«ÌÊ*-Ê }ÕÊ £É{Ê*-Ê
>«Ê -VÀiÜÊ/iÀ>ÃÊ £]xää7ÉÈÈä6Ê xä
ÊÊ Ê >`Ê-Õ«iÀÊiÌ>>ÀV
(1)
NOTE: Êi>`ÃÊ>ÀiÊ£n7]Ê£äxc
Ê°
6ΣxÓn
6nnä
Electrical
1£Îä / 1£Îä/
-
/Ê* /9*
Ê- Ê*"
,-
iÃ}i`ÊvÀʵÕVÊ«>iÊÕÌ}Ê>`Êv>ÃÌÊÜÀ}ÊvÊÕÌ«iÊ>«
`iÀð
`iÃÊ>`iÊvÊL>VÊ«
iV°ÊÊ/}ÊÃÊÃ
ÜÊÊ
>À`Ü>ÀiÊÃiVÌÊÕ`iÀÊE Ê*ÕV
Ê/}°
Catalog Wire Put
Number Base Mounting Rating Manufacturer Range p EAG-4734-2
EAG-4734-2 i`ÕÊ ->«Ê Èää7ÉÓxä6Ê
>}iÊ £n£ÓÊ-ÌÀ>`i`Ê Óxä
ÇÎÓÎ 1Ê i`ÕÊ ->«Ê Èää7ÉÓxä6Ê
>}iÊ £n£ÓÊ-ÌÀ>`i`Ê Óxä
ÓÓÓxn°Ê i`ÕÊÊ "i>Ê-VÀiÜ,}Ê Èää7ÉÓxä6Ê -Ì>ÌiÊ/Ê £{£ÓÊ-ÌÀ>`i`Ê Óxä
ÇÎÓÎ 1
ÇÎ£Ó 1Ê ÌiÀi`>ÌiÊ -«À}Ê7>Ã
iÀÊ Çx7ÉÓxä6Ê
>}iÊ £n£ÈÊ-ÌÀ>`i`Ê Èää
EAG-731-3 ÌiÀi`>ÌiÊ ->«Ê Çx7ÉÓxä6Ê
>}iÊ £n£ÈÊ-ÌÀ>`i`Ê Èää
Ç{Ó 1Ê
>`i>LÀ>Ê -«À}Ê7>Ã
iÀÊ Çx7É£Óx6Ê
>}iÊ Óä£nÊ-ÌÀ>`i`Ê xää
ÓÓÓxn°
*>iÊ
ÕÌÕÌÃ
,iviÀÊÌÊE Ê*ÕV
Ê/}ÊÊ
>À`Ü>ÀiÊÃiVÌ° EAG-731-3
ÇÎ£Ó 1
EAG-4734-2
ÇÎÓÎ 1
ÓÓÓxn° EAG-731
Ç{Ó 1
Ç{Ó 1
S2-C tooling 211 tooling
/W>ÃÌiÝ
/7Ê-/
8Ê- Ê-"
/Ê-9-/
/7Ê>ÃÌiÝÊ/7Çä£ÇÊi`ÕÊL>ÃiÊÃ}ÊÃViÌÊÃÊ>Ê
}
ʵÕ>ÌÞ]ÊiVV>]Ê
i>ÌÊÃÌ>Lâi`Ê
ÞÊÃViÌÊÌ
>ÌÊV>ÊLiÊÃ>««i`ÊÌÊÌ
iÊÃ}Êi>ÃÞÊÃ>Û}ÊÃÌ>>ÌÊ>`ÊÜÀ}ÊÌi°ÊÊ /7*/""
-ViÌÃÊÀiµÕÀiÊÌ
iÊÕÃiÊvÊ>ÊÃÌ>>ÌÊÌÊÌÊ>ÌÌ>V
ÊÌ
iÊÜÀ}°ÊÊ/ÃÊ>ÀiÊ>Û>>LiÊÊ
>Õ>ÊÀÊ«iÕ>ÌVÊÛiÀÃðÊʸ-Ó
¸Ê«>ÌÌiÀÊÌ}ÊvÀÊ«>iÊVÕÌÕÌÊÃÊÃ
ÜÊÊ
>À`Ü>ÀiÊ
ÃiVÌÊÕ`iÀÊE Ê*ÕV
Ê/}°
Catalog AW Put
Number Description Wire Range p
Ê /7Çä£ÇÊ i`°Ê >ÃiÊ-ViÌÊÈÈä7ÉÓxä6Ê £Ó£nÊ-ÌÀ>`i`Ê {xä /7/""
Ê /7/""Ê >Õ>Ê>`ÊÃÌ>>ÌÊ/Ê Ê £
Ê /7*/""Ê *iÕ>ÌVÊÃÌ>>ÌÊ/Ê Ê £ /7Çä£Ç
*,
-" Ê1/*
Ê*"/"Ê
" /,"-
ÀVÕÌÊÀ>ÞÊVÃi`Ê>ÌÊ}
Ì°
Catalog Load Put
Number Mounting Remarks olts olt/Amps p
*,
£äxÊ ÎÉn£nÊ/
Ài>`i`ÊÕÃ
ÊÕÌÊ Ê £ÓäÊ £]äääÊ £Ó
Threaded Stem Threaded Stem
*,
/£xÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ Ê £ÓäÊ £]nääÊ £Ó w/swivel
*,
/ÎäÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ Ê £ÓäÊ Î]äääÊ £Ó
*,
/£ÈnÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ Ê ÓänÓÇÇÊ £]nääÊ £Ó
*,
/ÎÈnÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ Ê ÓänÓÇÇÊ Î]äääÊ £Ó
*,
-/£xÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊÜÉ-ÜÛiÊ Ê £ÓäÊ £]nääÊ £Ó *,
*ÓÇx Twist Lock
*,
-/£Ê £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊÜÉ-ÜÛiÊ Ê {näÊ £]nääÊ £Ó
*,
*ÓÓÇxÊ /ÜÃÌVÊ /
iÀ>Êi>Þi`Ê,iëÃiÊ £ÓäÊ £]nääÊ £Ó
*,
*ÇÓÇxÊ /ÜÃÌVÊ /
iÀ>Êi>Þi`Ê,iëÃiÊ {näÊ £]nääÊ £Ó
*,
nÈäÊ /ÜÃÌVÊ
VÞÊ+ÕVÊ,iëÃiÊ £äxÓnxÊ £]nääÊ £
*,
ÓÊ /ÜÃÌVÊ ,iVi«Ì>ViÊÜÉ À>ViÌÊ Ê Ê £
*,
Ó *,
£äx
*,
*ÓÇxÊ /ÜÃÌVÊ -
ÀÌ}Ê
>«Ê Ê Ê £
/
,/
Ê*"/"Ê
" /,"-
ÀVÕÌÊÀ>ÞÊVÃi`Ê>ÌÊ}
Ì°
Catalog Loads Watts Loads Amps Put
Number Mounting Tungsten Ballast Tungsten Ballast olts p /{ä /{äÓÓ
/{äÎÎ /{£Ó£É /{£ÓÓ
Ê /{äÓ£Ê ÎÉn£nÊ/
Ài>`i`ÊÕÃ
ÊÕÌÊÊ £]nääÊ £]äääÊ £xÊ n°ÎÊ £ÓäÊ £
/{£ÎÎ
Ê /{äÓÓÊ ÎÉn£nÊ/
Ài>`i`ÊÕÃ
ÊÕÌÊÊ Î]ÈääÊ Ó]äääÊ £xÊ n°ÎÊ Ó{äÊ £
Ê /{äÎÎÊ ÎÉn£nÊ/
Ài>`i`ÊÕÃ
ÊÕÌÊÊ {]£ääÊ Ó]ÎääÊ £xÊ n°ÎÊ ÓÇÇÊ £
Ê /{£Ó£Ê £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ £]nääÊ £]äääÊ £xÊ n°ÎÊ £ÓäÊ £
Ê /{£ÓÓÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ Î]ÈääÊ Ó]äääÊ £xÊ n°ÎÊ Ó{äÊ £
Ê /{£ÎÎÊ £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊ {]£ääÊ Ó]ÎääÊ £xÊ n°ÎÊ ÓÇÇÊ £
Ê /{ÓÓ£Ê £ÉÓ£{Ê/
Ài>`i`Ê-ÌiÊÜÉ-ÜÛiÊ £]nääÊ £]äääÊ £xÊ n°ÎÊ £ÓäÊ £
Ê /{ÎÓ£Ê £Ê>}Ê7i>Ì
iÀÊ*ÀvÊ7>Ê*>ÌiÊ £]nääÊ £]äääÊ £xÊ n°ÎÊ £ÓäÊ £
/{ÓÓ£ /{ÎÓ£
"1/"",Ê-7/
-
ÀÊ`Û`Õ>ÊÃ}Ê«ÜiÀÊVÕÌvv°ÊÊ/,
ÊÃÊ>Ê
i>ÛÞÊ`ÕÌÞÊv>ViÊ«>ÌiÊÜÌ
ÊVÌÌiÀÊ«É«>`VÊ
Electrical
i°ÊÊ
ëiV>ÞÊÕÃivÕÊvÊLÀ`ÃÊ>Àiʸ«iV}¸Ê>ÌÊ>`ÊÌÕÀ}ÊvvÊÌ
iÊÃÜÌV
°
1Îä{näÉÎä{nÓÉÎä{nÈÊ>ÀiÊiÛiÀÊÃÜÌV
ÊVÛiÀÃÊ«Ài>ÃÃiLi`ÊÜÌ
Ê>««À«À>ÌiÊÃÜÌV
°
Catalog Put
Number Description Poles/Throw Rating p
/,7*-7Ê(1) ,ÕLLiÀÊ Ìi`Ê/}}iÊ -*-/Ê ÓäÉ£ÓäÓÇÇ6Ê £äÉ£ää
/, ""/Ê ,i«>ViiÌÊ ÌÊvÀÊ/,7*-7Ê Ê Ê £ää
/,
Ê >À}iÊV}Êv>ViÊ«>ÌiÊ Ê Ê £ää
1Îä{näÊ -ÜÌV
ÊÕÌi`ÊÊ£Ê>}Ê7*Ê
ÛiÀÊ -*-/Ê £äÉ£Óx6Ê Óx
1Îä{nÓÊ -ÜÌV
ÊÕÌi`ÊÊ£Ê>}Ê7*Ê
ÛiÀÊ -*-/Ê ÓäÉ£ÓäÓÇÇ6Ê Óx /,7*-7 1Îä{nä]
1Îä{nÈÊ -ÜÌV
ÊÕÌi`ÊÊ£Ê>}Ê7*Ê
ÛiÀÊ *-/Ê ÓäÉ£ÓäÓÇÇ6Ê Óx 1Îä{nÓ]Ê1Îä{nÈ
(1)
NOTE: Ê
«iÌiÊÜÌ
ÊLÌ]ÊÃÌ>`>À`Êv>ViÊ«>ÌiÊ>`ÊÀiÌ>}ÊÀ}°
**
Ê-7/
-
ÊvÕÊiÊvÊiÛÌÊÌiÃÊ>ÃÊ>Û>>Li°
Catalog Put
Number Description Poles/Throw Rating Termination p
Ê
6£ääÇnÊ *Õ
>Ê -*-/Ê ÎÉ£Óx6]Ê£ÉÓxä6Ê È¸Êi>`ÃÊ(1)Ê £äÉ£ää
Ê
6£ÈnÇxÊ i>ÛÞÊÕÌÞÊ*Õ
>Ê -*-/Ê ÈÉ£Óx6]ÊÎÉÓxä6Ê È¸Êi>`ÃÊ(1)Ê ÓxÉÓxä
Ê
6äxÇÓÊ ,Ì>ÀÞÊ -*-/Ê ÈÉ£Óx6]ÊÎÉÓxä6Ê È¸Êi>`ÃÊ(1)Ê £äÉ£ää
Ê
6xÇ{£Ê i>ÛÞÊÕÌÞÊ/}}iÊ *-/Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6xÇ{{Ê i>ÛÞÊÕÌÞÊ/}}iÊ */Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6xÇä£Ê i>ÛÞÊÕÌÞÊ/}}iÊ -*-/Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -`iÀÊÕ}ÃÊ £äÉ£ää
Ê
6xÇÎ£Ê i>ÛÞÊÕÌÞÊ/}}iÊ -*-/Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6xÇÎÎÊ i>ÛÞÊÕÌÞÊ/}}iÊ -*/Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6xÇÎ{Ê i>ÛÞÊÕÌÞÊ/}}iÊ -*/
"Ê £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6xÇÎxÊ i>ÛÞÊÕÌÞÊ/}}iÊ -*/
"ÊiÌ>ÀÞÊ £xÉ£Óx6]Ê£äÉÓxä6Ê -VÀiÜÊ/iÀ>ÃÊ £äÉ£ää
Ê
6ÇÓäÊ /}}iÊ -*-/Ê ÈÉ£Óx6]ÊÎÉÓxä6Ê È¸Êi>`ÃÊ(1)Ê £äÉ£ää
(1)
NOTE: Êi>`ÃÊ>ÀiÊ£n7]Ê£äxc
°
6£ääÇn
6£ÈnÇx
6äxÇÓ i>ÛÞÊÕÌÞÊ/}}i
6ÇÓä
6
- ££x]Ê
6
- Ó£x]
6
-£ÓäÓ]Ê
6
-ÓÓäÓ]
6xÓÓÈ
6££ä£Ó
6xxxää
6£{x£
*
6
- Σx]Ê
6
- {£x
6
-£Óä
6xÎÎÈ
/,
Ê/*
Catalog Put
Number Description Width Length p
MMM-16720 >VÊ6ÞÊ
iVÌÀV>Ê/>«iÊ ÎÉ{¸Ê ÈÈÊiiÌÊ £äÉ£ää
MMM-16720
,*Ê7,
Ê/
, -
ÕÊÀ`iÀÊÃÊ«ÕÌÕ«Ê>ÕÌ°ÊÊ"Ì
iÀÊÃâiÃÊ>`ÊÃÌÞiÃÊ>ÃÊ>Û>>Li°
Catalog AW Stud Insulated Barrel Put
Number Description Wire Range Size es/No p
Ê ÓxääÓÊ ,}Ê/iÀ>Ê ÓÓ£nÊ n£äÊ Ê £ää
Ê7
-- ÊÊ(1) ,}Ê/iÀ>Ê £È£{Ê n£äÊ Ê Óxä
Ê7
--
Ê(1) ,}Ê/iÀ>Ê £È£{Ê °ÓxäÊ Ê Óää
Ê-/
Ç£Ê ,}Ê/iÀ>Ê £Ó£äÊ °ÓxäÊ Ê £ää
ÊÓxääÓÊ ,}Ê/iÀ>Ê £Ó£äÊ n£äÊ Ê £ää ,}Ê/iÀ> -«>`iÊ/iÀ>
,*Ê
*Ê7,
Ê
"
/",-
*ÕÌÊիʵÕ>ÌÌiÃÊ>ÀiÊ>ÃÊÕÊÀ`iÀʵÕ>ÌÌið
Catalog Put
Number Type Color Permitted Wire Combinations p
-/,
È ÃÕ>Ìi`Ê
À«Ê
i>ÀÊ ÕÊÎÊ£{]ÊÊ>ÝÕÊ{Ê£ÓÊ £ääÉxää
-/7/ÓäääÊÊÊ
À«}Ê*iÀÃÊvÀÊ-/,
ÈÊ Ê £
ÛiiÌÊV«>VÌÊÃ
ÀÌÊ«ViÌÊÃâi°ÊÊVÕ`iÃÊÌiÃÌÊi>`ÃÊ>`ÊL>ÌÌiÀÞ°ÊÊ
ÇÊV>ÀÀÞ}ÊV>ÃiÊÃ`ÊÃi«>À>ÌiÞ°Ê
"Ì
iÀÊ`iÃÊ>ÃÊ>Û>>Li°
Catalog Range
Number Description Amps olts hms
-*
/ÓÈänÊ -->«ÊÉÊ6Ì"
iÌiÀÊ È]Ê£x]ÊÈä]Ê£xä]ÊÎääÊ
Ê £xä]ÊÎää]ÊÈääÊ
]ÊÈäÊ
Ê £]Ê£ä -*
/ÓÈän -+ÈÈ£ä6/£
-*
-*£{äÊ *ViÌÊ-âiÊÕÌiÌiÀÊ x]ÊÓx]ÊÓxäÊÊ £ä]Êxä]ÊÓxä]Êxää]Ê£äääÊ
Ê {]Ê{ä
Ó°x]Ê£ä]Êxä]ÊÓxä]Ê£äääÊ
Electrical
/"£än£ -*
-*£{ä
/Ê
/
,-
/
iÊ-9-ÓäxäÊ>`Ê-ÓäääÊvi>ÌÕÀiÃÊ>Ê£ÉÓ¸Ê`}Ì>Ê`ë>ÞÃÊ>`Ê«À«ÀiÌ>ÀÞÊ-ÞÛ>>Ê
iÉÌiÀÊVL>ÌÊ
Ì
>ÌÊiÃÕÀiÃÊ>VVÕÀ>ÌiÊÀiëÃiÊ>`ÊÃÌ>LÌÞÊÜÌ
ÕÌÊÀiµÕÀ}ÊiÝÌiÀÀÊwÌiÀðÊÊ/
iÊiÝViiÌÊVÀÊÀiëÃiÊvÊ
Ì
ÃÊvi>ÌÕÀiÊ>ÃÃÕÀiÃÊ«ÀiVÃiÊ}
ÌÊi>ÃÕÀiiÌÊÀi}>À`iÃÃÊvÊÌ
iÊ}
Ì¿ÃÊVÀ]Ê>}ÊÌÊ`i>ÊvÀÊÃ>ÀÊiiÀ}Þ]Ê
«>ÌÊ}ÀÜÌ
Ê>`ÊÃ>ÀÊ}
Ì}Ê>««V>Ìð
/
iÊ-9-ÓäxäÊ`vviÀÃÊvÀÊÌ
iÊ-9-ÓäääÊÊÌ
>ÌÊÌÊÜÊÀi>`ÊÊVÀiiÌÃÊvÊä°£ÊvÌV>`iÃÊLiÜÊxäÊ
vÌV>`ið
Catalog Range
Number Description Features Foot Candle Accuracy
-9-Óäää
-9-ÓäääÊ }Ì>Ê}
ÌÊiÌiÀÊÜÉ*ÕV
Ê ,i>`}Ê`]Ê
ÃiÊ
ÀÀiVÌi`Ê ä£Ê x -9-Óäxä GEN-217
-9-ÓäxäÊ }Ì>Ê}
ÌÊiÌiÀÊÜÉ*ÕV
Ê ,i>`}Ê`]Ê
ÃiÊ
ÀÀiVÌi`Ê ä£Ê x
GEN-217 >}Ê}
ÌÊiÌiÀÊ *ViÌÊ-âi]Ê
ÃiÊ
ÀÀiVÌi`Ê xäÉÓxäÉ£äääÊ £ä£x
/
,/
Ê/
Ê-7/
Ê*,/-
Catalog
Number Description olts
Ê /7£xÇä£äÊ ÌÀÊvÀÊ/£ää]Ê/£ÇäÊ-iÀiÃÊ £Óx /7£xÇä£äÊÉÊ /7£xÇΣä
Ê /7£xÇΣäÊ ÌÀÊvÀÊ/£ää]Ê/£ÇäÊ-iÀiÃÊ ÓänÉÓÇÇ nderside iew, Note Pinion Location
Ê /7{ÎäÓäÊ ÌÀÊvÀÊ`Ê/£ää]Ê/£ÇäÊ-iÀiÃÊ £Óx
Ê /7{ÎÎÓäÊ ÌÀÊvÀÊ`Ê/£ää]Ê/£ÇäÊ-iÀiÃÊ ÓänÉÓÇÇ
Ê /£xÈ/£ÇnÊ(1) /À««iÀÊ-iÌÊvÀÊ/£ää]Ê/£ÇäÊ-iÀiÃÊ
Ê /£xÈ/£xÓÊ(1) -««iÀÊ-VÀiÜÊ-iÌÊvÀÊ/£ÇäÊ-iÀiÃÊ
(1) -ÜÌV
ÊÌÀ
NOTE: Ê ÌÊ1Ê,iV}âi`Ê1,®°
Top iew
/7{ÎäÓäÊÉÊ /7{ÎΣä
nderside iew, Note Pinion Location
Electrical
211-071-055 -
i`i`]ÊÃ>Ìi`Ê £°ääÊ Ó{äÉ{näÊ £ÓäÉÓ{äÊ iÊ £££ÉÓÊ x£É£ÈÊ {ÎÉ{Ê Ê Ó{°ä
211-081-055 -
i`i`]ÊÃ>Ìi`Ê £°xäÊ Ó{äÉ{näÊ £ÓäÉÓ{äÊ iÊ £ÎÊ xÇÉnÊ xxÉ£ÈÊ Ê Ón°ä
211-091-055Ê -
i`i`]ÊÃ>Ìi`Ê Ó°ääÊ Ó{äÉ{näÊ £ÓäÉÓ{äÊ iÊ £ÎÊ xÇÉnÊ xxÉ£ÈÊ Ê Î°ä
211-051-208 -
i`i`]ÊÃ>Ìi`Ê °xäÊ ÓänÊ £ÓäÉÓ{äÊ iÊ ÎÉnÊ {ÎÉnÊ {£É£ÈÊ £ä Ê £Î°ä
211-071-208 -
i`i`]ÊÃ>Ìi`Ê £°ääÊ ÓänÊ £ÓäÉÓ{äÊ iÊ £££ÉÓÊ xÇÉnÊ {ÎÉ£ÈÊ £ä Ê Ó{°ä
216-1101 ÕV ÃÌ]ÊÃ>Ìi`Ê °£äÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ n£É{Ê ÎxÉnÊ Î£ÉÓÊ ÈäÊ È°£
216-1111 ÕV ÃÌ]ÊÃ>Ìi`Ê °£xÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ n£É{Ê ÎxÉnÊ Î£ÉÓÊ ÈäÊ Ç°Î
216-1121 ÕV ÃÌ]ÊÃ>Ìi`Ê °ÓxÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ ÎÉnÊ {ÎÉnÊ {£É£ÈÊ ÈäÊ ££°ä
216-1131 ÕV ÃÌ]ÊÃ>Ìi`Ê °xäÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ ÎÉnÊ {ÎÉnÊ {£É£ÈÊ ÈäÊ £{°ä
216-1141 ÕV ÃÌ]ÊÃ>Ìi`Ê °ÇxÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ £££ÉÓÊ x£ÉnÊ {ÎÉ{Ê ÈäÊ £°ä
216-1151 ÕV ÃÌ]ÊÃ>Ìi`Ê £°ääÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ £££ÉÓÊ x£ÉnÊ {ÎÉ{Ê ÈäÊ ÓÈ°ä
216-1171 ÕV ÃÌ]ÊÃ>Ìi`Ê Ó°ääÊ £ÓäÉÓ{äÊ £ÓÉÓ{Ê iÊ £ÎÊ xÇÉnÊ xxÉ£ÈÊ ÈäÊ {£°ä
1
/£äxÊÊ(1)
ÌÀÊ °ä{äÊ £ÓäÉÓänÉÓ{äÊ Ó{Ê iÊ Î£ÉÓÊ Ó£É{Ê ÓÊ Ê £°x
1
/£xäÊÊ(1)
ÌÀÊ(2)Ê °äxäÊ £ÓäÉÓänÉÓ{äÊ Ó{Ê iÊ Î£ÉÓÊ Ó£ÉÓÊ ÎÊ ÊÊ Ó°Î
1
/£ÇxÊÊ(1)
ÌÀÊ(3)Ê °äÇxÊ £ÓäÉÓänÉÓ{äÊ Ó{Ê iÊ ÎÊ ÎÊ Î£ÉÓÊ Ê Î°£
1
/£ää,ÊÊ(1)
ÌÀÊ(4)Ê °£ääÊ £ÓäÉÓänÉÓ{äÊ Ó{Ê iÊ ÎÊ {£É{Ê Ó£ÉÓÊ Ê {°x
NOTE: (1)Ê1Ê,iV}âi`Ê1,®]ÊVÃi`ÊVÀiÊ>`ÊVÊÜÌ
ÊÕÌ}ÊvÌ°ÊÊiÃÃÊ>ÀiÊ>««ÀÝ>Ìi°ÊÊ(2)Ê*À>ÀÞÊvÕÃiÊ«ÀÌiVÌi`ÊÊÓ°xÉÓxä6ÊÃÜLÜ°
(3)
Ê*À>ÀÞÊvÕÃiÊ«ÀÌiVÌi`Êΰ£xÉÓxä6ÊÃÜLÜ°ÊÊ(4)Ê
ÀVÕÌÊLÀi>iÀÊ«ÀÌiVÌi`°ÊÊ
£ä
9A
6ÌÃ ÊÊ *À>ÀÞÊiÃ
6Ìà ÌiÀViVÌÊ *À>ÀÞÊià 6Ìà ÌiÀViVÌÊ *À>ÀÞÊiÃ
277 ÊÊ
ÃÕ>ÌiÊÕÕÃi` £{
PRIMAR
PRIMAR
PRIMAR
270 ÊÊ
Ì>«ÃÊ`Û`Õ>Þ° £Î Ê {nä ÊÓÊÌÊÎÊ £{ Ê {nä ÊÓÊÌÊÎÊ £{
Ê ÓÈÎ ÊÊ £{ 240 Ê£ÊÌÊÎÊÊÓÊÌÊ{Ê £{ 240 Ê£ÊÌÊÎÊÊÓÊÌÊ{Ê £{
6Ìà ÌiÀViVÌÊÊ -iV`>ÀÞÊià 6Ìà ÌiÀViVÌÊÊ -iV`>ÀÞÊià 6Ìà ÌiÀViVÌÊÊ -iV`>ÀÞÊiÃ
SEC NDAR
SEC NDAR
SEC NDAR
£ä 60A
03ÊÊ,i` /7ÊÃÊ£äxc]ÊÈää6Ê>V
iÊÌÊÜÀi°
04ÊÊ"À>}i
12MTWAWM- 05ÊÊ9iÜÊ £ÓÊ -ÌÀ>`i`Ê xää¿Ê-« 7ÊÃÊäc]Ê£äää6Ê>««>ViÊÜÀ}Ê>ÌiÀ>°
06ÊÊÀii
18MTWAWM- 07ÊÊ Õi Ê £nÊ -ÌÀ>`i`Ê xää¿Ê-«
"À`iÀ}ÊvÀ>Ì
08ÊÊ ÀÜ Add color code suffix to number prefix to complete catalog number.
19ÊÊ*ÕÀ«i
16MTWAWM- Ê
91ÊÊ ÕiÉ7
Ìi £ÈÊ -ÌÀ>`i`Ê xää¿Ê-« i.e. 14MTWAWM-07 14MTW/AWM blue wire.
93ÊÊ"À>}iÉ >V Minimum order one 500 spool.
/"Ê
/"ÊÃÊ}>ÃÊÌÕLiÊÃ}Ê>`ÊÊLÕÀiÀÊ}ÌÊV>LiÊÕ«ÊÌÊ£x]äääÊÛÌðÊÊ/"£x*£äÊ
}À>ÞÊÊ-Õ«iÀiÝÊÃÊ«>LiÊ>`ÊÃÌÀ«ÃÊi>ÃÞ°ÊÊ/"£x-68Êi>ÌiÃÊÌ
iÊii`Ê
vÀÊ/"ÊÃiiÛ}ÊÀÊVÛiÀ}ÊÊiÊÃÌ>>ÌÃÊ`ÕiÊÌÊ>ÊLÕÌÊÌi}À>ÊÃiiÛiÊ
`iÃ}°ÊÊ*>V>}i`ÊÊ`ëiÃiÀÊLÝiðÊÊ/"£ä/
Ê>`Ê/"£x/
ÊÃÊ>ÊiÝÌÀiiÞÊ
yiÝLi]Ê`ÕÀ>LiÊ>`ÊÀi>LiÊ/"ÊV>LiÊÃÕÌ>LiÊvÀÊ>ÞÊÃÌ>>ÌÊVÕ`}ÊiÌ>VÊ
V`ÕÌ°ÊÊÌÊÃÊ«iÀÛÕÃÊÌÊ16]ÊâiÊ>`ÊÃÕ}
ÌÊÜÌ
Ê>Êvië>ÊvÊÓäÊÞi>ÀÃÊ
ÀÊÀi°ÊÊ*>V>}i`ÊÊÀiið
Catalog Trade Max Temp Wire auge Rating .D. Put Min.
Number Name °C Color AW olts Mfgr. Inches p rder
/"£x*"*Ê /Õv`iÊ `iÊiÝÊ £äxÊ >VÊ £{Ê £x]äääÊ *>}iÊ °Ó{ÎÊ Óxä¿Ê xä¿
/"£x*£äÊ Ê-Õ«iÀiÝÊ £äxÊ À>ÞÊ £{Ê £x]äääÊ *>}iÊ °ÓxäÊ Óxä¿Ê xä¿
/"£x/
7ÓxäÊ -Ì
iÀÊ-ViÊ £xäÊ 7
Ìi (1)Ê £{Ê £x]äääÊ /iVÕÝÊ °ÎxäÊ Óxä¿Ê Óxä¿Ê,Ê(2)
/"£ä*ä£Ê /Õv`iÊ £äxÊ >VÊ £nÊ £ä]äääÊ *>}iÊ °£näÊ Óxä¿Ê Óxä¿
/"£ä/
7ÓxäÊ -Ì
iÀÊ-ViÊ £xäÊ 7
Ìi (1)Ê £nÊ £ä]äääÊ /iVÕÝÊ °ÓäÊ Óxä¿ÊÊ ÊÊÊÊÓxä¿Ê,Ê(2)
/"£x7
-ä£Ê iÝÊ £äxÊ >VÊ £{Ê £x]äääÊ 7iÃÌÀÊ °Ó{xÊ Óxä¿Ê xä¿
/"£x7
-äÓÊ iÝÊ £äxÊ 7
ÌiÊ £{Ê £x]äääÊ 7iÃÌÀÊ °Ó{xÊ Óxä¿Ê xä¿
/"£x7
-£äÊ iÝÊ £äxÊ À>ÞÊ £{Ê £x]äääÊ 7iÃÌÀÊ °Ó{xÊ Óxä¿Ê xä¿
/"£x-68ä£Ê -iiÛi8Ê £äxÊ >VÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
/"£x-68äÓÊ -iiÛi8Ê £äxÊ 7
ÌiÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
/"£x-68£äÊ -iiÛi8Ê £äxÊ À>ÞÊ £{Ê £x]äääÊ *>}iÊ °ÓÎäÊ £xä¿Ê £xä¿Ê,
NOTE: (1)
ÊÃÊ>Û>>LiÊÊ >VÊ>`ÊÀ>Þ°ÊÊ
ÕÃÌÊVÀÃÊ>Û>>LiÊÜÌ
ʵÕ>ÌÌÞÊÀ`iÀðÊÊÊ(2)ÊÃÊ>Û>>LiÊÊ£ää¿ÊÀiið
,
Ê
"**
,Ê7,
ÊUÊ/
Ê7,
ÓÓ ,
£ÉÓÓ ,
ÊÃ`ÊLÞÊÌ
iÊ«Õ`]Ê£Ó ,
xääÊLÞÊÌ
iÊvÌ°Ê£Êëʰ
Catalog Wire auge Put
Number Description AW p
ÊÓÓ ,
£Ê -vÌÊ >ÀiÊ-`Ê
««iÀÊ7ÀiÊ ÓÓÊ £ÊL°Ê-«
ÊÓÓ ,
Ê -vÌÊ >ÀiÊ-`Ê
««iÀÊ7ÀiÊ ÓÓÊ ÊL°Ê-«
Ê£Ó ,
xääÊ -`Ê
««iÀÊ `Ê7ÀiÊ £ÓÊ xää¿Ê-«
Electrical
ÎäÓÇÎÊ ÇÎ Ê "À>}iÊ ÓÓ£{Ê ÎÊÓäÊ ÎÊ£ÈÊEʣʣnÊ xää
È
ÎääÇ{Ê Ç{ Ê 9iÜÊ £n£äÊ £Ê£{ÊEʣʣnÊ {Ê£{ÊEʣʣnÊ £äää
7 1/Ê7,
Ê
"
/",-
*ÕÌÊիʵÕ>ÌÌiÃÊ>ÀiÊ>ÃÊÕÊÀ`iÀʵÕ>ÌÌið
Catalog Trade Wire Minimum Maximum Put
Number Reference Color Range Wire Combinations Wire Combinations p
/"£äÈäÓÊ 9Ê 9iÜÊ ÓÓ£äÊ ÓÊ£nÊ ÎÊ£ÓÊ-`Ê £ää
/"£äÈxÓÊ 9Ê 9iÜÊ ÓÓ£äÊ ÓÊ£nÊ ÎÊ£ÓÊ-`Ê xää
9 ,
/"£äÈä{Ê ,Ê ,i`Ê £nnÊ ÓÊ£ÈÊ xÊ£ÓÊ-`Ê £ää
/"£äÈ£{Ê ,Ê ,i`Ê £nnÊ ÓÊ£ÈÊ xÊ£ÓÊ-`Ê £äää
-
"/
"Ê7,
Ê
"
/",-
*ÕÌÊիʵÕ>ÌÌiÃÊ>ÀiÊ>ÃÊÕÊÀ`iÀʵÕ>ÌÌið
Catalog Put 9 ,
Number Color Permitted Wire Combinations p
9Ê 9iÜÊ xnÊÓÓ]ÊÊ{ÈÊÓä]ÊÊÓxÊ£n]ÊÊÓÎÊ£È]ÊÊ£ÎÊ£{]ÊÊ£ÓÊ£Ó]ÊʣʣäÊ £ää
9 1Ê 9iÜÊ xnÊÓÓ]ÊÊ{ÈÊÓä]ÊÊÓxÊ£n]ÊÊÓÎÊ£È]ÊÊ£ÎÊ£{]ÊÊ£ÓÊ£Ó]ÊʣʣäÊ xää
,Ê ,i`Ê Ê£n]ÊÊ{ÈÊ£È]ÊÊÓxÊ£{]ÊÊÓxÊ£Ó]ÊÊ£ÎÊ£äÊ £ää
, 1Ê ,i`Ê Ê£n]ÊÊ{ÈÊ£È]ÊÊÓxÊ£{]ÊÊÓxÊ£Ó]ÊÊ£ÎÊ£äÊ xää
MMM-G À>ÞÊ {ÇÊ£{]ÊÊÓÈÊ£Ó]ÊÊÓ{Ê£ä]ÊÊÓÊnÊ £ää MMM-G
7, Ê/""-
Catalog
Number Description Manufacturer
6
£ÈÎÊ ÕÌ*ÕÀ«ÃiÊ7À}Ê/]Ê
ÕÌÃ]Ê-ÌÀ«ÃÊ>`Ê
À«ÃÊ 6>V
£ä£-Ê 7ÀiÊ-ÌÀ««iÀ]ÊÜÌ
Ê-«À}Ê,iÌÕÀÊ °ÊiÀ
/"£nÎ{äÊ ÕÌ>ÌVÊ7ÀiÊ-ÌÀ««iÀÊ /ÊEÊ
ÎÎÇ7Ê >}>Ê*iÀÃ]Ê
ÕÌÃ]Ê-ÌÀ«ÃÊ£Ó£{Ê7Ê
>iV
/"£{ÓxäÊ xä¿ÊÃ
Ì>«iÊ /ÊEÊ
/"£{ÓxnÊ £ää¿ÊÃ
Ì>«iÊ /ÊEÊ
Σ£{nÊ -«À}ÊÃ
Ì>«iÊi>`iÀÊ `i> /"£{Óxä
£ä£- 6
£ÈÎ /"£nÎ{ä
ÎÎÇ7 /"£{ÓxnÊ
-1*
,6-"
LiÀÊ"«ÌVÊ}
Ì}Ê-ÞÃÌiÃ
-Õ«iÀ6ÿÃÊwLiÀÊ«ÌVÊ}
Ì}ÊÃÞÃÌiÃÊ>`ÊV«iÌÃÊ>ÀiÊÕÃi`Ê>ÀÕ`ÊÌ
iÊÜÀ`ÊÌÊ}
ÌÊÃ}Ã]ÊLL>À`Ã]ÊV
>iÊ>`ÊL>VÌÊiÌÌiÀÃ]ÊÃÌ>ÀÊ
Vi}Ã]ÊVÛiÊ}
Ì}]ÊLÕ`}ÊÕÌiÃ]ÊwiÊ>ÀÌ]Ê>`ÃV>«iÃ]ÊÃÜ}Ê«Ã]ÊvÕÌ>Ã]ÊwLiÀÊ«ÌVÊVÕÀÌ>ÃÊ>`Ê`iVÀ>ÌÛiÊÜ>ÌiÀv>ðÊÊ-Õ«iÀ6ÃÊ
ÕÃiÃÊ>VÀÞVÊ«>ÃÌV®Ê«ÌV>ÊwLiÀÃÊÌ
>ÌÊ>ÀiÊÛÀÌÕ>ÞÊÕLÀi>>LiÊ>`Ê>iÊÌ
iÊ«À`ÕVÌÊÛiÀÞÊ>««i>}Ê>ÃÊ>ÊiÊ>ÌiÀ>ÌÛi°ÊÊÌÊÃÊ>ÊiÝViiÌÊ
V
ViÊvÀÊÕÃiÊÊÀÊ>ÀÕ`ÊÜ>ÌiÀÊÀÊ>ÞÜ
iÀiÊÌ
>ÌÊ
i>Ì]ÊÕÌÀ>ÛiÌÊÀ>ÞÃÊÀÊiiVÌÀVÌÞÊÃÊ>ÊVViÀ°Ê
-Õ«iÀ6ÿÃÊ>Õv>VÌÕÀ}Êv>VÌÞÊ>`Ê
i>`µÕ>ÀÌiÀÃÊ>ÀiÊÊ"À>`]ÊÀ`>]Ê1-ÊÜ
iÀiÊÌÊ«À`ÕViÃÊÌÃÊ«>ÌiÌi`Ê-`iÜÊV>LiÊ>`Ê
`ÜÊV>LiÊvÀÊ
ÕÃiÊÊÌ
iiÊ«>ÀÃ]Ê«ÀÛ>ÌiÊÀiÃ`iViÃ]ÊVÀ«À>ÌiÊvwViÃ]Ê}>ÃÊÃÌ>ÌÃ]ÊLÀ`}iÃ]ÊV>ÀÃ]ÊÌÀ>ÃÊ>`Ê>À«>iðÊÊ-Õ«iÀ6ÃÊ>Õv>VÌÕÀiÃÊ>ÊÜ`iÊÛ>ÀiÌÞÊvÊ}
ÌÊ
ÃÕÀViÃÊÌÊiiÌÊiÛiÀÞÊii`°ÊÊ-Õ«iÀ6ÃÊ
>ÃÊ>ÃÊ«À`ÕVi`ÊÃiÊvÊÌ
iÊÃÌÊëiVÌ>VÕ>ÀÊwLiÀÊ«ÌVÊ`ë>ÞÃÊÊÌ
iÊÜÀ`]ÊVÕ`}ÊÌ
iÊwLiÀÊ«ÌV>ÞÊÌÊ
V
>ÊLÌÌiÊ>`Ê/E/ÊÃ}ÃÊLÌ
ÊV>Ìi`ÊÊ iÜÊ9ÀÊ
ÌÞ¿ÃÊ/iÃÊ-µÕ>Ài°ÊÊÕ>ÌÀÃÊV>ÀÀÞÊ>Ê£ÊÞi>ÀÊÜ>ÀÀ>ÌÞÊiÝVÕ`}Ê>«°
Ê UÊ>«\ÊÇxÊÜ>ÌÌʵÕ>ÀÌâÊ
>}iÊ,£È]Ê
9
®Ê UÊLiÀÊ
>«>VÌÞ\ÊÓxääÊwLiÀÃ
Ê UÊ>«Êvi\Ê{äääÊ
ÕÀÃÊ>ÛiÀ>}iÊ
-®Êvi°Ê UÊ-ÛiÀÊ«Ü`iÀÊV>Ìi`ÊV>Ã}
Ê UÊ1]Ê
ÊEÊ
1ÊÃÌi`Ê`ÀÞÊV>Ì
£Óä6ÊUÊÈäâÊUÊÇÊLð
Light Color Wheel
Source ptions Effect Fiberhead
-6Çxä
-/
Ê ,i`]ÊÀii]Ê Õi]Ê9iÜÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6Çxä
-/-
Ê -«>ÀiÊÊ,i`]ÊÀii]Ê Õi]Ê9iÜÊ
ÀÊ-«>ÀiÊ Ýi`Ê
«ÝÞ
-6Çxä
7-
Ê -«>ÀiÊÊ7
ÌiÊ -«>ÀiÊ Ýi`Ê
«ÝÞ
-6Çxä
-
Ê -vÌÊ-«>ÀiÊ -
iÀÊ Ýi`Ê
«ÝÞ
-6Çxä
{
Ê
ÕÃÌÊ{Ê
ÀÃÊÊ6ÞÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6Çxä
n
Ê
ÕÃÌÊnÊ
ÀÃÊÊ6ÞÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6Çxä
Ê 7
ÌiÊ}
ÌÊ"Þ]Ê Ê
ÀÊ (4)Ê 7
ÌiÊ}
ÌÊ Ýi`Ê
«ÝÞ
-6Çxä{--Ê -Ì>`>À`Ê{Ê
ÀÃÊvÀÊ-`iÜ (1)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì
-6Çxän--Ê -Ì>`>À`ÊnÊ
ÀÃÊvÀÊ-`iÜ (2)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì Color Wheel Data
-6Çxä{
-Ê
ÕÃÌÊ{Ê
ÀÃÊvÀÊ-`iÜ (3)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì
-6Çxän
-Ê
ÕÃÌÊnÊ
ÀÃÊvÀÊ-`iÜ (3)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì "/
\ (1)
Ê{Ê-Ì>`>À`ÊVÀÃÊVÃÃÌÊv\
Ê 7
ÌiÊä®]ÊÌÊ*Êή]ÊiÊÀiiÊ£Ó®]Ê
Þ>Ên®°
(2)
ÊnÊ-Ì>`>À`ÊVÀÃÊVÃÃÌÊv\
-1*
,6-" Ê-/,*,"ÊÇäÊ/Ê-"1,
- Ê 7
ÌiÊä®]Ê
Þ>Ên®]Ê9iÜʣή]Ê/ÕÀµÕÃiÊ®]Ê"À>}iÊ£x®]
-Õ«iÀ6ÿÃÊ-Ì>À*ÀÊÇäÊÕ>ÌÀÊÕÃiÃÊ6ÃÊÓÒÊÌiV
}ÞÊÜÌ
Ê«ÀÛi`ÊÀiyiVÌÀÊ Ê >ÀÊ ÕiÊx®]ÊÌÊ*Êή]ÊiÊÀiiÊ£Ó®°
`iÃ}Ê>`Ê
i>ÌÊVÌÀÊvÀÊ>ÝÕÊ>«Ê«iÀvÀ>Vi]ÊÃiVÕÀiÊ>`ÊÌÀÕiÊ>«Ê>`ÊwLiÀÊ (3)
Ê>ÃÃÊVÀÊÜ
ii]Ê{ÊÀÊnÊVÕÃÌÊVÀð
«ÀÌÊ>}iÌÊ>ÃÃÕÀ}ÊÌ
iÊLiÃÌÊ>VVi«Ì>ViÊ>}iÊvÀÊwLiÀ]Ê>`ÊwLiÀÊ«ÀÌÊV}ÊvÀÊwLiÀÊ
«ÀÌiVÌ°ÊÊ-Ì>À*ÀÊÇäÊÃÊ`iÃ}i`ÊvÀÊÃÌÊ
`ÜÊ>««V>ÌÃÊ>`ÊÃÌ>ÀÊwi`ÊVi}ÃÊ Ê -iiÊVÀÊV
«ÊÃÌ}ÊiÃiÜ
iÀiÊÊÌ
ÃÊÃiVÌ°
Ü
iÀiÊ>ÝÕÊLÀ}
ÌiÃÃÊÃÊiViÃÃ>ÀÞÊ`ÕiÊÌÊ
}
Ê>LiÌÊ}
ÌÊiÛið (4)
Ê ÊVÀÊÜ
iiÊÀÊÌÀÊVÕ`i`°Ê-}iÊwÝi`ÊVÀÊV
«Ê>Û>>Li°
-Ì>`>À`Êvi>ÌÕÀiÃÊVÕ`i\Ê"ÉvvÊVÀÊÜ
iiÊÃÜÌV
ÊÜ
iÊiViÃÃ>ÀÞ®Ê>`Ê>Ê£ÉÓ¸Ê
yiÝLiÊV`ÕÌÊViVÌÀÊvÀÊ
>À`ÊÜÀ}°ÊÊÀÊÌiÀÀÊ`ÀÞÊV>ÌÃÊÞ°
Ê UÊ>«\ÊÇäÊÜ>ÌÌÊiÌ>Ê
>`iÊ UÊLiÀÊ
>«>VÌÞ\ÊÓxääÊwLiÀÃ
Ê UÊ>«Êvi\ÊäääÊ
ÕÀÃÊ>ÛiÀ>}iÊ
-®Êvi°Ê UÊÕÕÊ«Ü`iÀÊV>Ìi`ÊV>Ã}
Ê UÊ1]Ê
ÊEÊ
1ÊÃÌi`Ê`ÀÞÊV>Ì
£Óä6ÊUÊÈäâÊUÊÓ£ÊLð
Light Color Wheel
Source ptions Effect Fiberhead
Ê -6-*
-/
Ê ,i`]ÊÀii]Ê Õi]Ê9iÜÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6-*
-/-
Ê -«>ÀiÊÊ,i`]ÊÀii]Ê Õi]Ê9iÜÊ
ÀÊ-«>ÀiÊ Ýi`Ê
«ÝÞ
-6-*
7-
Ê -«>ÀiÊÊ7
ÌiÊ -«>ÀiÊ Ýi`Ê
«ÝÞ
-6-*
-
Ê -vÌÊ-«>ÀiÊ -
iÀÊ Ýi`Ê
«ÝÞ
-6-*
{
Ê
ÕÃÌÊ{Ê
ÀÃÊÊ6ÞÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6-*
n
Ê
ÕÃÌÊnÊ
ÀÃÊÊ6ÞÊ
ÀÊ
>}}Ê Ýi`Ê
«ÝÞ
-6-*
Ê 7
ÌiÊ}
ÌÊ"Þ]Ê Ê
ÀÊ (4)Ê 7
ÌiÊ}
ÌÊ Ýi`Ê
«ÝÞ
-6-*{--Ê -Ì>`>À`Ê{Ê
ÀÃÊvÀÊ-`iÜÊ (1)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì
-6-*n--Ê -Ì>`>À`ÊnÊ
ÀÃÊvÀÊ-`iÜÊ (2)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
ÌÊ
Ê -6-*{
-Ê
ÕÃÌÊ{Ê
ÀÃÊvÀÊ-`iÜÊ (3)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì
-6-*n
-Ê
ÕÃÌÊnÊ
ÀÃÊvÀÊ-`iÜÊ (3)Ê
ÀÊ
>}}Ê
«ÀiÃÃÊ/}
Ì
INTERSTATE ELECTRIC CO., INC.
9ATES !VE #OMMERCE #! s 0ROCYON ,AS 6EGAS .6 s 'OODYEAR 2D "ENICIA #!
C-71
-1*
,6-"
LiÀÊ"«ÌVÊ}
Ì}Ê-ÞÃÌiÃÊVÌ°
Electrical
}
ÌÊÃÕÀViÃÊÜÊLiÊÃiiÊÃÕÌ>iÕÃÞÊ>`ÊÀiµÕÀiÊÃÞV
Àâi`ÊVÀÊV
>}}Ê
ivviVÌÃ]Ê>ÊÃÞV
ÀÕÃÊ>ÃÌiÀÊVÌÀiÀÊ>`ÊÌiÀ>ÊVÀVÕÌÀÞÊÕÃÌÊLiÊÀ`iÀi`Ê«ÀÀÊ
ÌÊÃÌ>>Ì°ÊÊ-ÞV
ÀÕÃÊVÌÀiÀÃÊV>ÊLiÊvÕ`ÊiÃiÜ
iÀiÊÊÌ
iÊÃiVÌ°ÊÊ
>Ê>ÃÊLiÊ8x£ÓÊVÌÀi`ÊÀÊ`i`]ÊV>ÊvÀÊÀiÊv°
£ÓäÛÊUÊÈäâÊUÊÓÈÊLð
Light Color Wheel
Source ptions
Ê -6*{ä£Óä{-Ê {Ê-Ì>`>À`Ê
ÀÃ (1)
-6*{ä£Óän-Ê nÊ-Ì>`>À`Ê
ÀÃ (2)
-6*{ä£Óä{
Ê {Ê
ÕÃÌÊ
ÀÃ (3)
-6*{ä£Óän
Ê nÊ
ÕÃÌÊ
ÀÃ (3)
Ê -6*{ä£Óä Ê 7
ÌiÊ}
ÌÊ"Þ]Ê Ê
À (4)
-1*
,6-" Ê
*-
Ê/Ê-"1,
-
-Õ«iÀ6ÿÃÊ
V«ÃiÊ Õ>ÌÀÊ Ü>ÃÊ `iÃ}i`Ê vÀÊ >ÝÕÊ LÀ}
ÌiÃÃÊ UÊ>«\ÊÓÇäÊÜ>ÌÌÊiÌ>Ê
>`iÊ UÊLiÀÊ
>«>VÌÞ\Êxää
ÕÌâ}Ê6ÃÊÓÒÊÌiV
}Þ°ÊÊ,iVi`i`ÊvÀÊÃ}>}iÊ>`Ê>ÀV
ÌiVÌÕÀ>Ê Ê UÊ>«Êvi\ÊÓäääÊ
ÕÀÃÊ>ÛiÀ>}iÊ
-®ÊviÊ UÊ>Û>iÊ«Ü`iÀÊV>Ìi`ÊV>Ã}
}
Ì}ÊÌ
>ÌÊÀiµÕÀiÃÊ>ÝÕÊLÀ}
ÌiÃÃÊvÀÊ-`iÜÊV>Li°ÊÊ-Ì>`>À`Ê Ê UÊ1]Ê
ÊEÊ
1ÊÃÌi`ÊÌiÀÀÉiÝÌiÀÀ
vi>ÌÕÀiÃÊVÕ`i\ÊÉvvÊ«ÜiÀÊVÀÊÃÜÌV
Ê>ÌÊÃiÀÛViÊ`À]ÊÉvvÊVÀÊ
Ü
iiÊÃÜÌV
Ê>`Ê>Ê£ÉÓ¸ÊyiÝLiÊV`ÕÌÊViVÌÀÊvÀÊ
>À`ÊÜÀ}°
V«ÃiÊÃÊ>ÃÊ>Û>>LiÊÊÌ
iÀÊ«À>ÀÞÊÛÌ>}iðÊÊ7
iÊÌÜÊÀÊÀiÊ}
ÌÊÃÕÀViÃÊ
ÜÊLiÊÃiiÊÃÕÌ>iÕÃÞÊ>`ÊÀiµÕÀiÊÃÞV
Àâi`ÊVÀÊV
>}}ÊivviVÌÃ]Ê>Ê
ÃÞV
ÀÕÃÊ >ÃÌiÀÊ VÌÀiÀÊ >`Ê ÌiÀ>Ê VÀVÕÌÀÞÊ ÕÃÌÊ LiÊ À`iÀi`Ê «ÀÀÊ ÌÊ
ÃÌ>>Ì°ÊÊ-ÞV
ÀÕÃÊVÌÀiÀÃÊV>ÊLiÊvÕ`ÊiÃiÜ
iÀiÊÊÌ
iÊÃiVÌ°ÊÊ
>Ê
>ÃÊLiÊ8x£ÓÊVÌÀi`ÊÀÊ`i`]ÊV>ÊvÀÊÀiÊv°
£ÓäÛÊUÊÈäâÊUÊ£ÈÊLð
Light Color Wheel
Source ptions
Ê -6
xÓ£Óä{-Ê {Ê-Ì>`>À`Ê
ÀÃ (5)
-6
xÓ£Óän-Ê nÊ-Ì>`>À`Ê
ÀÃ (2)
-6
xÓ£Óä{
Ê {Ê
ÕÃÌÊ
ÀÃ (3)
-6
xÓ£Óän
Ê nÊ
ÕÃÌÊ
ÀÃ (3)
Ê -6
xÓ£Óä Ê 7
ÌiÊ}
ÌÊ"Þ]Ê Ê
À (4)
-6ÓÓx
-6xä
-1*
,6-" Ê-
"7Ê
-`iÜÊV>LiÊÃÊ>ÊÃ>viÊ>ÌiÀ>ÌÛiÊÌÊiÊÌ
>ÌÊV
>}iÃÊVÀ]ÊÃÊiiÀ}ÞÊivwViÌÊ
>`ÊÃÊÛÀÌÕ>ÞÊÕLÀi>>Li°ÊÊ-`iÜÊV>LiÊÃÊÃÕÌ>LiÊvÀÊÌiÀÀÊ>ÃÊÜiÊ>ÃÊ
iÝÌiÀÀÊ>««V>ÌðÊÊ/
iÊiÝÌiÀÀÊ>ViÌÊÃÊ16Ê«ÀÌiVÌi`]Ê>}>iV`iÊ>`ÊvÕ}V`iÊ
ÌÀi>Ìi`ÊvÀÊ>ÝÕÊ«ÀÌiVÌÊ>}>ÃÌÊÌ
iÊiiiÌðÊÊÌÊV>Ê>ÃÊLiÊÕÃi`ÊÕ`iÀÊ
Ü>ÌiÀÊ>`ÊÊiÝÌÀiiÊV`ÊÜi>Ì
iÀÊV`ÌðÊÊ7Ì
ÊÊ
i>ÌÊÀÊiiVÌÀVÌÞÊÊÌ
iÊ -6{Ó-
V>Li]ÊÌÞ«V>Ê}
Ì}Ê`iÃ}ÊÀiÃÌÀVÌÃÊ>ÀiÊi>Ìi`°ÊÊ-`ÊLÞÊÌ
iÊvÌ°
Catalog Diameter
Number (Inches) Recommended ses
-6{Ó-Ê ÎÉnÊ *ÀiVÌÃÊÌ
>ÌÊ`iwiÊÀÊ`ii>ÌiÊwiÊiÃÆ
ÊÊ Ê >ÃiÃ]Ê`ÞÊÌÊÌiÀÀÊiÛÀiÌ]ÊvÕÀÌÕÀi]
ÊÊ Ê ÌÀ>VÊÌÞ«iÊ>««V>ÌÃ]ÊÃ}ÊiÌÌiÀ}°
-6n{-Ê £ÉÓÊ ÌiÀÀÊ>`ÊiÝÌiÀÀÊ>««V>ÌÃÆ -6n{-
ÊÊ Ê L>ÌÃ]ÊÜ`ÜÃ]ÊÃ}>}i]ÊiÝ
LÌð
-6£ÓÈ-Ê xÉnÊ `ÊiÃÊÌ
>ÌÊÜÊLiÊÛiÜi`ÊvÀÊ>Ê`ÃÌ>ViÆ
ÊÊ Ê °i°Ê>ÀV
ÌiVÌÕÀ>ÊLÕ`}Ê
}
}
ÌÃ]
ÊÊ Ê >ÕÃiiÌÊ«>ÀÊÀ`iÃ]ÊÃ}>}i°
-6{Ó1/,Ê £ÉÓÊ À}
ÌiÀÊÌiÀÀÊ>`ÊiÝÌiÀÀÊ>««V>ÌÃ
ÊÊ Ê ÀÊÜ
iÀiÊ>LiÌÊ}
ÌÊÃÊ>Êv>VÌÀ°
-6n{1/,Ê xÉnÊ /
iÊLÀ}
ÌiÃÌÊL`ÊiÃÊÌ
>ÌÊÜÊLiÊÛiÜi`ÊvÀÊ>Ê`ÃÌ>Vi
ÊÊ Ê ÀÊÜ
iÀiÊ>LiÌÊ}
ÌÊÃÊ>Êv>VÌÀ° -6£ÓÈ-
1-/"Ê
"",Ê-
/" Ê1
Ê",Ê
" -/,1
/ Ê--Ê
"",Ê7
-
}
ʵÕ>ÌÞ]Ê`V
ÀVÊ}>ÃÃÊV
«ÃÊÜ
V
ÊÞi`ÊÀV
Ê>`ÊÃÕ«iÀLÊVÀ°ÊÊÛ>>LiÊVÀÃÊÃ
ÜÊLiÜ°ÊÊ
ëiV>ÞÊ
i«vÕÊÊÌ
iÊÃiiVÌÊvÊ>ÊVÕÃÌÊ{VÀÊÀÊnVÀÊ
Ü
ii°
"ÊÃÞV
ÀÕÃÊÕÌÃ]ÊV
«Ê¸
¸ÊÃÊÌ
iÊ
iÊVÀÊ«ÃÌÊÊ{VÀÊÜ
iiÊ`iÃÊ>`ÊV
«Ê¸¸ÊÃÊÌ
iÊ
iÊVÀÊ«ÃÌÊÊnVÀÊÜ
iiÊ`iðÊÊ/
iÊ
iÊVÀÊ
«ÃÌÊÃÊÜ
iÀiÊÌ
iÊ>}iÌÊÊÌ
iÊVÀÊÜ
iiÊÃÊ>}i`ÊÜÌ
ÊÌ
iÊÃiÃÀ°
0Ê
i>ÀÊ7
Ìi®
1Ê ÕiÊ>}iÌ>
2Ê >}iÌ> -iÃÀ
3Ê ÌÊ* C B
4Ê ,i`Ê>}iÌ> >}iÌÊ
5Ê
Electrical
>ÀÊ Õi {Ê
ÀÊ7
ii
ÀÊ7
ii
6Ê *À>ÀÞÊ ÕiÊ
7Ê i`ÕÊ Õi
8Ê
Þ> A B
9Ê /ÕÀµÕÃiÊ C
ÀÊ7
ii
H
10Ê >ÀÊÀiiÊ
i
11Ê *À>ÀÞÊÀiiÊ G D
ÀÊ*Ã-
12Ê iÊÀiiÊ Ì
E
13Ê
F
9iÜ
14Ê LiÀ
15Ê "À>}i nÊ
ÀÊ7
ii
16Ê ,i`
£äÊ`>Ì>ÊV>LiÊÃÊÕÃi`ÊÌÊÌÀ>ÃviÀÊÀiÌ>ÌÊvÀ>ÌÊvÊVÀÊÜ iiÊ>}ÃÌÊÃÞV ÀÕÃÊÕÌðÊÊ-`ÊLÞÊÌ iÊvÌ°Ê
Catalog
Number Description
-6Îää
Ê >ÃÌiÀÊ-ÞV
ÀÕÃÊ
ÌÀ
-6Èää
Ê >ÃÌiÀÊ-ÞV
ÀÕÃÊ
ÌÀ -6Îää
-6
£äÊ >Ì>Ê
>Li
-6Èää
--",
-
-Õ«iÀ6ÃÊVi>ÀÊÕÌ}ÊÌÀ>VÊÃÊÕÃivÕÊÊÕÌ}Ê-`iÜÊV>Li°ÊÊ7
ÌiÊÕÌ}ÊÌÀ>VÊVÀi>ÌiÃÊ
>ÊVi>Ê`iwi`ʸi`}i¸ÊÊ-`iÜÊV>Li°ÊÊ-`ÊÊÈ¿Ê«iViðÊÊ
i>ÀÊ*V«ÃÊV>ÊLiÊë>Vi`ÊÕÌÊ>`Ê
ÕÃi`Ê>ÃÊ>Ê>ÌiÀ>ÌÛiÊÌÊÕÌ}ÊÌÀ>V°ÊÊÊÃÕLÊViVÌÀÊV>ÊLiÊÕÃi`ÊÌÊ
`Ê>`ÊÃiVÕÀiÊ-6n
Ê
ÕÌ}Ê/À>V
`ÜÊV>LiÊÊL>VÌʸ>¸ÊÃ}ÃÊ>`ÊÊV
>iÊiÌÌiÀð
Catalog Put
Number Description p
-6/,{ÓÊ
i>ÀÊÕÌ}Ê/À>VÊvÀÊ-6{Ó-]ÊÈ¿Ê*iViÊ £
-6/,£ÓÈÊ
i>ÀÊÕÌ}Ê/À>VÊvÀÊ-6n{]Ê-6£ÓÈÊEÊ-6£Èn-Ê
>Li]ÊÈ¿Ê*iViÊ £
-6/,£ÓÈ7/Ê 7
ÌiÊÕÌ}Ê/À>VÊvÀÊ-6n{]Ê-6£ÓÈÊEÊ-6£Èn-Ê
>Li]ÊÈ¿Ê*iViÊ £
-6*
{ÓÊ
i>ÀÊ*
«ÊvÀÊ-6{Ó-Ê
>LiÊ £ää
Electrical
-6*
n{Ê
i>ÀÊ*
«ÊvÀÊ-6n{-Ê
>LiÊ £ää *
« -ÕLÊ
iVÌÀ
-6*
£ÓÈÊ
i>ÀÊ*
«ÊvÀÊ-6£ÓÈÊEÊ-6£Èn-Ê
>LiÊ £ää
-6-
Ê >VÊ-ÕLÊ
iVÌÀÊ £
Substrates
48032GSA Gold Satin Anodized 48" 96" .032 Clear Anod.
410032GSA Gold Satin Anodized 48" 120" .032 Clear Anod.
48032BBGA Brite Brushed Gold Anodized 48" 96" .032 Clear Anod.
410032BBGA Brite Brushed Gold Anodized 48" 120" .032 Clear Anod.
410040BBGA Brite Brushed Gold Anodized 48" 120" .040 Clear Anod.
48032BCA Brite Clear Anodized 48" 96" .032 Clear Anod.
48040BCA Brite Clear Anodized 48" 96" .040 Clear Anod.
410032BCA Brite Clear Anodized 48" 120" .032 Clear Anod.
410040BCA Brite Clear Anodized 48" 120" .040 Clear Anod.
48032CSA Clear Satin Anodized 48" 96" .032 Clear Anod.
410040CSA Clear Satin Anodized 48" 120" .040 Clear Anod.
48032BBCA Brite Brushed Clear Anodized 48" 96" .032 Clear Anod.
48040BBCA Brite Brushed Clear Anodized 48" 96" .040 Clear Anod.
410032BBCA Brite Brushed Clear Anodized 48" 120" .032 Clear Anod.
410040BBCA Brite Brushed Clear Anodized 48" 120" .040 Clear Anod.
410040ADB Alliance Dark Bronze 48" 120" .040 White
410063ADB Alliance Dark Bronze 48" 120" .063 White
48040HR Hunter Red 48" 96" .040 White
410040HR Hunter Red 48" 120" .040 White
48040HB Heron Blue 48" 96" .040 White
48040PB Pepsi Blue 48" 96" .040 White
410040IG Ivy Green 48" 120" .040 White
48040AY Alliance Yellow 48" 96" .040 White
410040AY Alliance Yellow 48" 120" .040 White
48040ACY (1) Caution Yellow 48" 96" .040 Caution Yellow
48040AI Alliance Ivory 48" 96" .040 White
410040AI Alliance Ivory 48" 120" .040 White
48040MT Mocha Tan 48" 96" .040 White
NOTE: (1)
Masked on both sides.
ALUCOBOND
Alucobond® is a composite consisting of two sheets of .020" aluminum with a polyethylene core. It can be fabricated by methods and equipment traditionally used
with metal, plastic or wood. It is virtually flat yet bends and forms easily. It has a high strength-to-weight ratio and high weather resistance. The white polyester resin
finish is a suitable primer coat for other field applied colors. 1st surface is protected with a polymask film. Available in almost any size. Custom colors available with
quantity order.
CUTTING: Alucobond® can be cut with circular, band or sabre saws,
Catalog Color Dimensions Thickness Color Put Weight
Number 1st Surface Width Length (mm) 2nd Surface Up (Lbs.) or by shearing. It can also be drilled and routed.
CO202-418 White 50" 98" 3 White 10 29 BENDING: Minimum bending radius is 15 times the panel thickness.
Substrates
CO202-444 White 62" 122" 3 White 10 55 Springback is similar to that experienced with sheet metal. Curve
CO202-618 White 50" 98" 4 White 10 36 with pyramid roller, press break or stationary pipe die.
CO202-620 White 50" 122" 4 White 10 45 JOINING AND ATTACHING: Butt joints are usually made by hot-air-
CO202-644 White 62" 144" 4 White 10 67
welding, attachment made by screws, rivets or VHB double face
tape. Materials that can be joined to Alucobond® include aluminum,
plastic, stainless steel, coated steel (with cadmium, zinc, chrome or
aluminum coating) and organic materials. Copper, bronze, brass and
iron should not be joined because electrolysis will cause corrosion.
SILK-SCREENING: Alucobond® is suitable for silk-screening. For
outdoor exposure it is recommended to overpaint with a colorless
protective coating.
DIBOND
Dibond® is a composite consisting of two sheets of .010" aluminum with a polyethylene core. It has the same characteristics as Alucobond® but is more economical.
Dibond® is intended for such applications as signage, screen printing, exhibit/display, digital mounting as well as OEM industrial applications. Surfaces have a high
quality polyester resin finish. First surface is protected with a polymask film. Fabrication information is the same as when working with Alucobond®.
Catalog Color Dimensions Thickness Approx. Weight
Number 1st Surface (1) Width Length (mm) (Lbs.)
D0202-318 White 48" 96" 2 18
D0202-320 White 48" 120" 2 23
D0202-418 White 48" 96" 3 24
D0202-618 White 48" 96" 4 23
D0201-420 Black 48" 120" 3 30
NOTE: (1)
2nd surface color is white.
ALUMALITE
Alumalite® is a two-sided aluminum surfaced, corrugated polyethylene core panel. Alumalite®
can be used as a letterback in place of wood core letterback products or as a routed face without
changes to UL procedures. Alumalite® cuts and routs easily using standard woodcutting tools. A
V-groove can be routed in a panel and bent to make a 90° return or lettering can be routed out
and backed up with a push through, translucent plexiglas panel for a backlit sign face. Smooth
surfaces require little or no preparation and are suitable for paints, screen print inks and pressure
sensitive vinyls. The high strength-to-weight ratio and weather resistance make it unnecessary to
use edge sealing when used outdoors, although edge capping is available if desired. Alumalite®
is UV and temerature resistant with a "Class A" flame-spread rating and is a recognized component
of electrical signs, file number E60612. Both surfaces are protected with a polymask film.
Catalog Color Color Dimensions Thickness(1) Weight
Number 1st Surface 2nd Surface Width Length (mm) (Lbs.)
LAM-AL01-718 Black Black 48" 96" 6 18
LAM-AL02-718 White White 48" 96" 6 18
LAM-AL02-720 White White 48" 120" 6 23
LAM-AL02-740 White White 60" 96" 6 23
LAM-ALO2-744 White White 60" 120" 6 29
LAM-AL03-718 Red Red 48" 96" 6 18
LAM-AL05-718 Yellow Yellow 48" 96" 6 18
LAM-AL06-718 Ivy Green Ivy Green 48" 96" 6 18
LAM-AL07-718 Blue Blue 48" 96" 6 18
LAM-AL11-718 Bronze Bronze 48" 96" 6 18
LAM-AL12-718 Ivory Ivory 48" 96" 6 18
Substrates
LAM-AL20-718 Silver Silver 48" 96" 6 18
NOTE: (1)
Thickness may vary by up to 2mm (.093") less than indicated.
ECONOLITE
Econolite™ is a corrugated polyethylene core panel with a white aluminum smooth surface on one
side and a mill finish backer. An economical alternative for one-sided applications.
Catalog Color Color Dimensions Thickness(1) Weight
Number 1st Surface 2nd Surface Width Length (mm) (Lbs.)
LAM-EL02-718 White Mill 48" 96" 6 18
LAM-EL02-818 White Mill 48" 96" 10 29
NOTE: (1)
Thickness may vary by up to 2mm (.093") less than indicated.
D-LITE
D-Lite™ incorporates the same qualities as Alumalite® and Econolite™ in an econmical 3mm
thickness. Available in 1 or 2 sided finished material.
Catalog Color Color Dimensions Thickness(1) Weight
Number 1st Surface 2nd Surface Width Length (mm) (Lbs.)
LAM-D2-1-418 White Mill 48" 96" 3 15
LAM-D2-1-420 White Mill 48" 120" 3 19
LAM-D2-2-418 White White 48" 96" 3 17
LAM-D2-2-420 White White 48" 120" 3 21
NOTE: (1)
Thickness may vary by up to 2mm (.093") less than indicated.
MDF • MEDEX
Industrial grade Medium Density Fiberboard (MDF) is manufactured with a formaldehyde-free binder
which meets requirements of ANSI A208.2-1994, product class MD-exterior. MDF is available
in many variations such as Medex, Medex NC, Medite II, etc. Differentiated by fiber origin such
as softwood or hardwood, these products share common characteristics and are well known for
their smooth surface, ease of workmanship and ability to take a precise machined edge or panel
route. Medex and Medex NC are recommended for use in exterior signage, schools, museums,
day care centers, libraries, medical and dental facilities, retirement homes and laboratories. Call
for availability.
INTERSTATE ELECTRIC CO., INC.
2240 Yates Ave., Commerce, CA 90040 • 5435 Procyon, #100, Las Vegas, NV 89118 • 6860 Goodyear Rd., Benicia, CA 94510
D-5
CYRO ACRYLITE GP • CELL CAST ACRYLIC SHEET
Acrylite GP is the highest quality cell-cast acrylic sheet made to exacting standards. It offers excellent optical characteristics, thickness tolerances, light stability and low
internal stress levels for consistant performance.
Acrylite GP is a lightweight, rigid thermoplastic material that has many times the breakage resistance of standard window-pane glass. It is highly resistant to weather
conditions. Can be easily sawed, machined, thermoformed, and cemented. Suitable for most commercial applications and is ultraviolet light absorbing up to approximately
360 nanometers. It's unique properties are ideal for a wide range of applications such as signs, merchandising displays, lighting fixture diffusers, decorative paneling,
security glazing, aquariums, hockey rinks, industrial and school glazing, shower enclosures and skylights.
Clear/colorless Acrylite GP acrylic sheet carries an exclusive 10-year limited warranty on light transmission.
Acrylite GP sheet is available in thicknesses from .060" to 2" (1.5mm to 50mm) and in more than 40 standard sizes from 36" x 48" to 72" x 120" . All sheets are
papermasked on both sides. Custom colors also available.
Catalog Color Reference Dimensions Thickness Catalog Color Reference Dimensions Thickness
Number Number Color Width Length (Inches) Number Number Color Width Length (Inches)
GP-418 - Clear 51" 100" .118 GP324-0-418 2418 Brown 51" 100" .118
GP-618 - Clear 51" 100" .177 GP324-0-618 2418 Brown 75" 100" .177
GP-718 - Clear 51" 100" .236
GP-818 - Clear 49.75" 99" .354 GP506-0-418 2030 Green 51" 100" .118
GP-918 - Clear 49.75" 99" .472 GP506-0-618 2030 Green 51" 100" .177
GP-1118 - Clear 48.50" 97" .708 GP506-0-656 2030 Green 75" 100" .177
GP-1318 - Clear 48.50" 97" .944
GP-1518 - Clear 48.50" 97" 1.50 GP507-0-418 2108 Green 51" 100" .118
GP-1718 - Clear 48.50" 97" 2.00 GP507-0-618 2108 Green 51" 100" .177
GP507-0-656 2108 Green 75" 100" .177
GP015-2-418 7328 White 51" 100" .118 GP047-2-418 2146 Ivory 51" 100" .118
GP015-2-420 7328 White 50" 126" .118 GP047-2-618 2146 Ivory 51" 100" .177
GP015-2-444 7328 White 63" 126" .118 GP047-2-620 2146 Ivory 51" 126" .177
GP015-2-456 7328 White 75" 102" .118 GP047-2-640 2146 Ivory 63" 100" .177
GP015-2-458 7328 White 75" 126" .118
Substrates
GP047-2-656 2146 Ivory 75" 100" .177
GP015-2-614 7328 White 51" 75" .177 GP047-2-658 2146 Ivory 75" 126" .177
GP015-2-618 7328 White 51" 126" .177
GP015-2-640 7328 White 51" 126" .177 GP303-0-418 2119 Orange 51" 100" .118
GP015-2-640 7328 White 63" 102" .177 GP303-0-618 2119 Orange 51" 100" .177
GP015-2-644 7328 White 63" 126" .177 GP303-0-656 2119 Orange 75" 100" .177
GP015-2-656 7328 White 75" 100" .177 GP303-0-658 2119 Orange 75" 126" .177
GP015-2-658 7328 White 75" 126" .177
GP015-2-718 7328 White 51" 100" .236 GP205-0-418 2157 Red 51" 100" .118
GP015-2-918 7328 White 49.75" 99" .472
GP211-1-418 2283 Red 51" 100" .118
GP076-0-418 7508 White 51" 100" .118 GP211-1-456 2283 Red 75" 100" .118
GP211-1-618 2283 Red 51" 100" .177
GP020-4-418 2447 White 51" 100" .118 GP211-1-656 2283 Red 75" 100" .177
GP020-4-656 2447 White 75" 100" .177
GP209-0-418 2415 Red 51" 100" .118
GP199-0-418 2025 Black 51" 100" .118 GP209-0-618 2415 Red 51" 100" .177
GP199-0-618 2025 Black 51" 100" .177 GP209-0-656 2415 Red 75" 100" .177
GP199-0-656 2025 Black 75" 100" .177 GP278-0-418 2793 Red 51" 100" .118
GP199-0-718 2025 Black 51" 100" .236 GP278-0-456 2793 Red 75" 100" .118
GP199-0-918 2025 Black 49.75" 99" .472 GP278-0-618 2793 Red 51" 100" .177
GP278-0-656 2793 Red 75" 100" .177
GP605-0-418 2114 Blue 51" 100" .118 GP278-0-658 2793 Red 75" 126" .177
GP605-0-456 2114 Blue 75" 100" .118
GP605-0-618 2114 Blue 51" 100" .177 GP702-0-418 2287 Violet 51" 100" .118
GP605-0-656 2114 Blue 75" 100" .177
GP407-2-418 2037 Yellow 51" 126" .118
GP606-0-418 2050 Blue 51" 100" .118 GP407-2-456 2037 Yellow 75" 126" .118
GP606-0-618 2050 Blue 51" 100" .177 GP407-2-618 2037 Yellow 51" 126" .177
GP606-0-656 2050 Blue 75" 100" .177 GP407-2-640 2037 Yellow 63" 126" .177
GP407-2-656 2037 Yellow 75" 126" .177
GP607-1-418 2051 Blue 51" 100" .118 GP407-2-658 2037 Yellow 75" 126" .177
GP607-1-618 2051 Blue 51" 100" .177
GP607-1-656 2051 Blue 75" 100" .177 GP432-2-418 2465 Yellow 51" 100" .118
GP432-2-456 2465 Yellow 75" 100" .118
GP693-0-418 2648 Blue 51" 100" .118 GP432-2-618 2465 Yellow 51" 100" .177
GP432-2-656 2465 Yellow 75" 100" .177
GP311-1-656 2370 Bronze 75" 100" .177
GP406-1-418 2016 Yellow 51" 100" .118
GP131-2-656 2412 Bronze 51" 100" .177 GP406-1-618 2016 Yellow 51" 100" .177
GP406-1-656 2016 Yellow 75" 100" .177
GP121-0-456 2349 Gray 75" 100" .118
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
Las Vegas: 702.795.2233 / 800.772.4141 / Fax 702.798.9911 • Benicia: 707.747.5115 / 800.824.0099 / Fax 707.747.1266
D-6
CYRO ACRYLITE FF ACRYLIC SHEET
Acrylite FF acrylic sheet is a continuously manufactured acrylic sheet. It is
Catalog Color Dimensions Thickness
produced by an innovative process, resulting in a sheet offering the easy handling Number Reference Color Width Length (Inches)
and processing of extruded sheet along with the high optical characteristics and
FF-418 - Clear 48" 96" .118
low stress levels expected of cast products. Acrylite FF is a lightweight, rigid FF-456 - Clear 72" 96" .118
and weather-resistant thermoplastic. It is dimensionally stable and resistant to FF-618 - Clear 48" 96" .177
breakage and can easily be sawed, machined, heat-formed and cemented. FF-718 - Clear 48" 96" .236
Clear and white sheets have clear film mask on both sides, all other colors are FF015-2-418 7328 White 48" 96" .118
FF015-2-420 7328 White 48" 120" .118
paper masked on both sides. Other sizes and colors also available. FF015-2-456 7328 White 72" 96" .118
FF015-2-618 7328 White 48" 96" .177
FF015-2-620 7328 White 48" 120" .177
FF015-2-644 7328 White 60" 120" .177
FF015-2-656 7328 White 72" 96" .177
FF015-2-658 7328 White 72" 120" .177
FF020-4-418 2447 White 48" 96" .118
FF020-4-718 2447 White 48" 96" .236
FF199HG-418 2025 Black 48" 96" .118
FF199HG-456 2025 Black 72" 96" .118
FF199HG-618 2025 Black 48" 96" .177
FF199HG-656 2025 Black 72" 96" .177
FF605-0-418 2114 Blue 48" 96" .118
FF606-0-418 2050 Blue 48" 96" .118
FF311-1-418 2370 Bronze 48" 96" .118
FF311-1-618 2370 Bronze 48" 96" .177
FF507-0-418 2108 Green 48" 96" .118
FF047-2-418 2146 Ivory 48" 96" .118
Substrates
Substrates
FF3-318M Clear 48" 96" .098 Paper, 2 Sides
FF3-418M Clear 48" 96" .118 Paper, 2 Sides
OP3-418M Clear, UV Filtering 48" 96" .118 Paper, 2 Sides
The ACRYLITE Color Coding System uses 4-5 digit numbers for all colors, including white and black. The first digit identifies the color group:
0 White and Ivory 2 Red 4 Yellow and Amber 6 Blue 8 Not Assigned
1 Gray and Black 3 Orange and Brown 5 Green 7 Violet 9 Not Assigned
The second, third and sometimes fourth digits are assigned to specific colors. These digits have no special significance and are not related to the code used for the first digit. They are used
only to load and identify up to 999 different shades within each color group. The last digit indicates the approximate percentage range of light transmission. For example 131-2 is a Bronze
transparent color with a 20% to 29% range of light transmission.
This listing of competitive color numbers does not imply that these colors are identical with each other.
Listings are approximately equivalent and can be used without appreciably changing the desired effect.
Substrates
SL-52R Clear 78 .150 400 2434 2,600
SL-53R Clear 102 .150 400 3182 3,400
dichloride), apply to surfaces to be bonded and hold parts under pressure
SL-60R Clear 55 .177 300 1519 1,375 until cured. Add 10% glacial acetic acid for the best joint appearance.
SL-61R Clear 67 .177 300 1851 1,675 IPS-55 two-part cement can also be used and is shown in the Sign
SL-62R Clear 78 .177 300 2155 1,950 Supplies Section under Cement for Plastics.
SL-63R Clear 102 .177 300 2812 2,550 PAINTING and SILK SCREENING: Can be painted by silk screening or
S7328SL-40R White 55 .118 450 1520 2,062 standard spray techniques using inks and paints commonly available for
S7328SL-50R White 55 .150 400 1716 1,833 polycarbonate sheet.
S7328SL-51R White 67 .150 400 2090 2,233
S7328SL-52R White 78 .150 400 2434 2,600 STRIP HEATING: Strip heating is one way to achieve localized bending
S7328SL-58R White 42 .150 400 1310 1,400 of Makrolon polycarbonate sheet for use in signs. Heating both sides at
S7328SL-60R White 55 .177 300 1519 1,375 the bend area will help achieve optimum results. Drying is recommended
S7328SL-61R White 67 .177 300 1851 1,675 unless the material is .118" or less in thickness. Brake bending can be
S7328SL-62R White 78 .177 300 2155 1,950 done on gauges less than .118".
S7328SL-63R White 102 .177 300 2812 2,550
SHEARING, PUNCHING, and BLANKING: Unlike acrylic which will shatter,
Makrolon polycarbonate sheet resists cracking or crazing when shearing,
punching or blanking as long as the proper sharp tools are used.
SHEFFIELD MAKROLON/HYZOD SL POLYCARBONATE SHEETS THERMOFORMING: Makrolon polycarbonate sheet can be thermoformed
Makrolon SL flat sheet is also available as well as additional colors, Abrasion Resistant (AR) with excellent results on standard equipment using conventional
and General Purpose (GP) versions. polycarbonate forming techniques. The sheet requires predrying to
remove excess moisture. Drying guidelines are furnished in the following
chart with other production recommendations which should be followed
for optimum results.
Substrates
ACRYSTEEL I-GP IMPACT MODIFIED ACRYLIC ON REELS
Aristech Acrysteel® I-GP is continuous cast thermoplastic acrylic sheet designed to give a "preferred balance" of physical properties and performance. Acrysteel® I-GP
has been engineered to have sufficient impact strength to reduce breakage during fabrication, during field installation and has 5 to 6 times greater impact strength than
standard acrylic. Acrysteel® has excellent resistance to outdoor weathering, is solvent cementable and easily fabricated.
FABRICATION: Acrysteel® I-GP can be fabricated with the same
techniques used for regular acrylic sheet including gang cutting,
hot or cold bending, flame polishing and can also be sheared and
hole punched. Acrysteel® can be solvent cemented using the same
cements used on regular acrylic.
PAINTING: Acrysteel® I-GP can be painted with regular acrylic sign
paints. Both Spraylat and Akzo Nobel paint products are approved
Reel on shipping pallet for use on Acrysteel® I-GP.
DURAPLEX IMPACT MODIFIED & HIGH IMPACT ACRYLIC SHEETS & REELS PLASKOLITE, INC.
Plaskolite Duraplex SG05 is a continuously processed tough acrylic sheet that combines exceptional weatherability, ease of fabrication and impact strength to give it
a high performance to cost factor. Plaskolite Duraplex SG05 provides 5 to 6 times the impact strength of standard acrylic sheet and has the highest stiffness of any
impact sign material including polycarbonate. It can be cut, drilled and routed with standard equipment and procedures recommended for conventional acrylic sheet.
Duraplex SG10 high impact acrylic provides 10 times the impact strength of standard acrylic sheet.
Prime-All primer by Ronan and Jay Cooke's All Purpose Sign Primer
work best. Dimensional graphics can be primed with a polyester
sanding resin to reduce sanding time.
FINISHING: Polyurethane enamels are the best exterior finishes
to apply, providing superior resistance to expansion and cracking
and have excellent UV resistance. Sign-Foam® has excellent color
retention and are easily sprayed. Economical automotive acrylic
enamels are adequate for smaller Sign-Foam® projects and will
make a good quality finish. In addition, quality heavy-bodied acrylic
latex paints are the most economical finish for Sign-Foam® and are
simple to apply by hand or spray.
SPECIAL EFFECTS: Sign-Foam's® easy shaping and finishing allows
you to simulate metal graphics that rival actual metal. 18lb. Sign-
Foam® can be sandblasted like wood. Linear strokes with a wire
brush simulate a rough sawn wood texture. Sign-Foam® carves like
soft stone yet finishes like wood or metal and can even reproduce a
tile or masonry look with grout lines and stone texture.
Substrates
S-01-444 Black 60" 120" 3mm (.118") 21.5 bent faster than most conventional plastics depending on thickness
S-01-6.518 Black 48" 96" 5mm (.197") 23.1 and shape. Please inquire for fabrication data.
S-01-718 Black 48" 96" 6mm (.236") 27.5
S-01-744 Black 60" 120" 6mm (.236") 42.9
S-01-918 Black 48" 96" 13mm (.500") 42.9
S-06-418 Green 48" 96" 3mm (.118") 13.7
S-06-718 Green 48" 96" 6mm (.236") 27.5
S-07-418 Blue 48" 96" 3mm (.118") 13.7
S-07-718 Blue 48" 96" 6mm (.236") 27.5
S-10-418 Gray 48" 96" 3mm (.118") 13.7
S-10-718 Gray 48" 96" 6mm (.236") 27.5
S-14-418 Teal 48" 96" 3mm (.118") 13.7
S-16-418 Beige 48" 96" 3mm (.118") 13.7
S-16-718 Beige 48" 96" 6mm (.236") 27.5
S-19-418 Purple 48" 96" 3mm (.118") 13.7
S-20-418 Light Gray 48" 96" 3mm (.118") 13.7
S-20-718 Light Gray 48" 96" 6mm (.236") 27.5
S-23-418 Dark Red 48" 96" 3mm (.118") 13.7
S-23-718 Dark Red 48" 96" 6mm (.236") 27.5
S-25-418 Bright Yellow 48" 96" 3mm (.118") 13.7
S-25-718 Bright Yellow 48" 96" 6mm (.236") 27.5
S-27-418 Dark Blue 48" 96" 3mm (.118") 13.7
S-27-718 Dark Blue 48" 96" 6mm (.236") 27.5
Substrates
STYRENE SHEETS
Styrene sheets are made of high impact styrene with smooth surfaces. Quantity orders can be cut to
custom sizes. Styrene sign blanks in small sizes can be found in the Sign Supplies section under
Sign Blanks. Other colors, sizes and thicknesses also available.
Catalog Dimensions Thickness
Number Color Width Length (Inches)
STY-009 White 48" 96" .020
STY-013 White 48" 96" .030
STY-018 White 48" 96" .040
STY-218 White 48" 96" .060
STY-418 White 48" 96" .125
Substrates
F327C-640CTN White White 60" 96" .187 25
F327BB-28X40 Black Black 28"(1) 40"(1) .187 Bulk LAMINATING: Foil, printed paper, poster, photo paper and fabrics
F327BB604BU Black Black 32" 40" .187 Bulk may all be laminated to Fome-Cor® using standard mounting
F327BB604CTN Black Black 32" 40" .187 25 equipment and bonding agents.
F327BB618BU Black Black 48" 96" .187 Bulk
F327BB618CTN Black Black 48" 96" .187 25
MOUNTING: Use standard dry mounting equipment and adhesives
F327BB-54X77 Black Black 54" 77" .187 Bulk that operate in the range of 180 - 225 °F. 30 - 60 seconds in the
F-ST-818 White White 48" 96" .375 12
press is sufficient for most applications. Fome-Cor® accepts either
hot or cold vacuum mounting. It is also suitable for cold mounting
NOTE: (1)
Actual dimensions are 27.875" x 39.875". using standard adhesives and low to moderate pressure rollers.
PRINTING AND PAINTING: The white clay-coated surface of Fome-
Cor® is a top quality printing surface. It may also be painted with
latex, oil based or acrylic paints.
JETMOUNT GRAPHIC ARTS BOARD
JetMount™ is rigid while lightweight. It consists of a thicker extruded polystyrene foam core laminated between 12pt. clay-coated paper liners. Foam is enhanced
to resist dents and provide exceptional durability. JetMount™ was engineered a quarter inch thick resulting in a more rigid board. Available in up to 5' by 8' panels,
JetMount™ is the ideal mounting substrate for digital imaging.
Catalog Dimensions Thickness Put MOUNTING AND LAMINATING: While JetMount™ is designed for
Number Color Width Length (Inches) Up indoor applications, most paper, foil or plastic sheet film can be
F435C-718CTN White 48" 96" .250 20 mounted to its smooth surface. The special properties of JetMount™
F435C-740CTN White 60" 96" .250 20 are perfect for almost any mounting project, including lithos, posters,
F435BB718CTN Black 48" 96" .250 20 art and photographs. Virtually any mounting fabrication technique
F435BB740CTN Black 60" 96" .250 20 may be used, including dry mounting, wet pressure-sensitive
adhesives and automatic litho mounting.
CUTTING: Smooth, crisp edges can be achieved by cutting the
high-density foam with a standard mat and glass cutter. To make
numerous sizes and intricate shapes with ease, use a utility knife
or Cutawl.
ACID-FREE FOME-COR
Acid-Free Fome-Cor® is ideal for use in conservation quality framing. Paper surface of the board
is buffered to maintain a non-acidic stability. Designed to be used in direct contact with artwork.
Meets the highest conservation standards for preserving works of art.
VALUBOARD
ValuBoard was designed and developed by Fome-Core as an intermediate
substrate for the point-of-purchase (POP) display market. Its economical
natural kraft liners are similar to those used in corrugated boards so costs
are comparable. However, the smooth, foam, core of ValuBoard provides
a superior mounting surface and graphic presentation. In addition, its foam
core permits the user to die cut displays and achieve an attractive pillowed
edge that simply can not be achieved with corrugated products. Virtually
any type of paper, foil or plastic sheet film can be mounted on ValuBoard if
the proper mounting techniques and adhesives are used. Adhesives should
be solvent free and compatible with the print to be mounted. Plastics,
coated stock and ink jet receptive materials may not be compatible with
all adhesives.
Catalog Thickness
Number Color Width Length (Inches)
VB-618 Natural Kraft 48" 96" .187
GATORFOAM
Gatorfoam® surfaced panels consist of a, rigid, polystyrene foam core faced on both sides with smooth resin impregnated, moisture resistant fiber veneers which are
excellent for painting, screening, laminating and photo mounting. Although weather resistant, proper support must be added for outdoor use since panels have a
tendency to bow towards the sun. Black surfaced Gatorfoam® has a black foam core and is not recommended for exterior use. Gatorfoam's high strength-to-weight
ratio makes it ideal for exhibits, displays and signage construction.
Custom sizes also available from our modern cutting facility. Please call for quote.
Catalog Surface Core Dimensions Thickness Put CUTTING: Gatorfoam® may be cut with a standard table or band
Number Color Color Width Length (Inches) Up saw using thin, fine toothed blades. Irregular cuts can be made by
IPC-618-W White White 48" 96" .187 15 routers using a multi-fluted bit. A K11 Cutawl tool is also suitable.
IPC-640-W White White 60" 96" .187 15 Die or guillotine cutting is not recommended.
IPC-644-W White White 60" 120" .187 10 GLUING: Gatorfoam® can be glued with any good water based
IPC-918-W White White 48" 96" .50 12
IPC-940-W White White 60" 96" .50 12
contact cement. Edging can be glued-on using the heat activated
IPC-944-W White White 60" 120" .50 8 Edgemate system shown in the Sign Supplies section.
IPC-1118-W White White 48" 96" .75 8 PAINTING: Gatorfoam's surface needs no special preparation other
IPC-1318-W White White 48" 96" 1.00 6 than to be clean and oil free. Minor blemishes can be sanded out
IPC-1518-W White White 48" 96" 1.50 4 using 180 grit silicone carbide dry paper. Gatorfoam® accepts
IPC-1718-W White White 48" 96" 2.00 3
acrylic, vinyl, enamel or lacquer paints. Oil or solvent-based paints
IPC-618-01 Black Black 48" 96" .187 15 should not make contact with the polystyrene core as it will cause
IPC-640-01 Black Black 60" 96" .187 15 deterioration. For best results, surfaces to be screen printed should
IPC-644-01 Black White 60" 120" .187 10 be finished with a clear sealer.
IPC-918-01 Black Black 48" 96" .50 12
IPC-940-01 Black Black 60" 96" .50 12
IPC-944-01 Black White 60" 120" .50 8
IPC-1118-01 Black Black 48" 96" .75 8
Substrates
IPC-1318-01 Black Black 48" 96" 1.00 6
IPC-1518-01 Black Black 48" 96" 1.50 4
IPC-618-N Natural White 48" 96" .187 15
IPC-640-N Natural White 60" 96" .187 15
IPC-644-N Natural White 60" 120" .187 10
IPC-918-N Natural White 48" 96" .50 12
IPC-940-N Natural White 60" 96" .50 12
IPC-944-N Natural White 60" 120" .50 8
IPC-1118-N Natural White 48" 96" .75 8
IPC-1318-N Natural White 48" 96" 1.00 6
IPC-1518-N Natural White 48" 96" 1.50 4
GATORLITE
GatorLite is a lightweight structural panel of rigid polystyrene foam core laminated on both sides by
moisture resistant man-made wood fiber veneer. The face veneer is less refined than that of Gatorfoam.
The face laminates have been specially developed to provide an excellent surface for digital imaging
and photo mounting.
Catalog Surface Core Dimensions Thickness Put
Number Color Color Width Length (Inches) Up
IPC-640-NL Natural White 60" 96" .187 15
IPC-940-NL Natural White 60" 96" .50 12
IPC-640-0IL Black Black 60" 96" .187 15
IPC-940-0IL Black Black 60" 96" .50 12
FOAM BLANKS
Dow Styrofoam brand "Square Edge" is a light blue extruded polystyrene sheet.
Dow "Square Edge" has silk-like surfaces that can be painted or printed on with
water based paints or non-solvent inks.
Gatorblanks® are first quality Gatorfoam® cores with no rigid surface applied.
Both brands are ideal for light duty applications and can be used outdoors when UV
protected. Most water based contact cements can be used.
Catalog Material Dimensions Thickness Put
Number Color Width Length (Inches) Up
DOW-SE-1318 Light Blue 48" 96" 1.00 Bulk
DOW-SE-1718 Light Blue 48" 96" 2.00 Bulk
IPC-GB-1318 White 48" 96" 1.00 Bulk
IPC-GB-1718 White 48" 96" 2.00 Bulk
GATORPLAST
Gatorplast™ consists of a lightweight, extruded foam core laminated on both sides with a 15 mil, high-impact matte polystyrene cap sheet. It is ideal for displays, photo
mounting and sign making. It accepts both cut-to-shape lettering and vinyl lettering and can be used indoors and outdoors. It is recommended that the foam be covered
with channels or painted with a UV barrier coating. Cap sheet should also be protected with a UV barrier for maximum outdoor life.
Catalog Surface Core Dimensions Thickness Put
CUTTING: Can be cut with standard table saws. A thin kerfed blade
will produce optimal cuts. Detailed shapes and contours can be
Substrates
Substrates
PRESSURE SENSITIVE FOAM-X
A pressure sensitive Foam-X with DF adhesive film already applied. Hi-Tac version is non-removable while the Lo-Tac
version is re-positionable.
Catalog Surface Core Dimensions Thickness Put Adhesive
Number Color Color Width Length (Inches) Up Type
FOM-618-PSHT White White 48" 96" .187 25 Hi-Tac Adhesive
FOM-618-PSLT White White 48" 96" .187 25 Lo-Tac Adhesive
Substrates
Pressure sensitive adhesives, depending on the product used, can be used with or
without press equipment.
BONDING: White glues, hot melt adhesives, spray cements and double sided tapes
will bond Kapa-Bloc material. Solvent based adhesives may also be used. All
methods of bonding Kapa-Bloc material should be tested prior to committing to a
production run.
WEATHERABILITY: Kapa-Bloc material is moisture resistant. There is little to no
change in Kapa-Bloc material when exposed to a very moist conditions for a prolonged
period of time. The core material is unaffected by ultraviolet radiation and requires
no protection when used out doors.
PRINTING: MightyCore accepts most solvent based, water based and UV inks.
There is no need for surface preparation prior to printing; however, a clear sealer
may be used.
GLUING: Use a roller for easy application. Use hot melt glue, white glue or carpenter's
glue for edge-to-edge gluing. Apply a thin coat to the edge of one board and press
firmly against the edge to be joined to it. To join two MightyCore boards together,
use hot melt glue, rubber cement, contact cement, spray adhesives or white glue.
WORKING WITH VINYL: Vinyl lettering successfully adheres to MighyCore, however
repositioning vinyl letters or removing them will damage the surface paper.
GROMMETS AND SCREWS: MightyCore holds grommets and screws effectively and
more securely than any other heavy duty foam board without cracking the surface.
BLACK CHIPBOARD
Brown chipboard, clay coated white on 1 side.
Catalog Thickness
Number Color Width Length (Inches)
PAP-2844050BC Black 28" 44" .050
Substrates
THRU WHITE PAPERBOARD
White clay coated on 2 sides with a white core.
Catalog Thickness Weight
Number Color Width Length (Inches) (Lbs.)
PAP-2844048 White 28" 44" .048 1.6
CARDSTOCK • PAPERBOARD
A large variety of cardstock is available. Call for more information.
ULTRA MOUNT
Ultra Mount is a lightweight structural panel consisting of a white extruded polystyrene foam core faced on both sides with white poly-coated 18 pt. Kraft paper. Face laminates
have been specially developed to provide a good surface for painting, silk screening, photo mounting and vinyl lay up. Ultra Mount is not recommended for exterior use.
CUTTING: Ultra Mount can be cut with a circular saw blade specifically
Catalog Dimensions Thickness Put designed for cutting paper faced foam boards. Thin-rimmed
Number Color Width Length (Inches) Up
high speed carbide-tipped plastic cutting blades (72 to 80, 25°
UM-618-02 White 48" 96" .187 32 alternating teeth on a 10" dia.) are recommended.
UM-918-02 White 48" 96" .50 24
PAINTING: Ultra Mount can be painted with poster colors, acrylic
UM-618-01 Black 48" 96" .187 32 paints, tempra, India ink or latex-based pigments. Caution should
UM-918-01 Black 48" 96" .50 24 be taken when using oil based or solvent based systems not to allow
the paint to come in contact with the polystyrene core.
PRINTING AND SCREENING: Ultra Mount faces accept most printing
and screening inks well. Always test ink prior to production run.
For best results in silk screening, wipe the panel clean with a
tack cloth prior to printing. Forced drying by hot air ovens is not
recommended.
PHOTO MOUNTING: Dry mounting temperatures should be kept
below 200° F if possible. Vacuum mounting works well. Spray
adhesives and wet mounting techniques are also suitable.
ULTRA PLUS
Ultra Plus is a lightweight structural panel consisting of a white or black rigid polystyrene foam core faced on both sides with a smooth, moisture resistant sheet of 1mm
expanded PVC. Face laminates have been specially developed to provide an excellent surface for painting, silk screening, laminating, photo mounting and vinyl lay up.
Ultra Plus is an excellent choice for interior and exterior signage, mounting, exhibits, POP displays and routed letters. Black Ultra Plus is not recommended for exterior
use. Other sizes and colors also available.
Catalog Dimensions Thickness Put CUTTING: Ultra Plus can be cut with a circular saw blade designed
Number Color Width Length (Inches) Up for cutting Ultra Plus.
UP-718-02 White 48" 96" .25 12 PAINTING: Ultra Plus needs no special preparation before priming or
UP-918-02 White 48" 96" .50 12 painting. For best results surface should be clean and free of any
UP-1518-02 White 48" 96" 1.50 8 oil contaminates. Cleaning the panel with glass cleaner or isopropyl
UP-1718-02 White 48" 96" 2.00 6 alcohol just prior to coating can accomplish this. Most sign quality
UP-718-01 Black 48" 96" .25 12 oil and solvent based paints can be used provided that paint is not
UP-918-01 Black 48" 96" .50 12 allowed to come into contact with the polystyrene core.
UP-1318-01 Black 48" 96" 1.00 12
PRINTING AND SCREENING: Ultra Plus panels are rigid, lightweight
and easy to handle. The surface of Ultra Plus has a closed cell matte
finsih that makes screen printing easy to accomplish. The use of vinyl
and vinyl/acrylic solvent based inks are very compatible. The use of
water based inks has also had some success with Ultra Plus.
PHOTO MOUNTING: The surface of Ultra Plus makes an excellent
material for pressure sensitive photo mounting. Because of the
rigidity of the panel, finished mounts are stronger than mounts
using lighter foam-type substances. Also suitable for mounting
resin coated photo papers, Cibachrome prints, posters, lithographs,
Substrates
blueprints, plastic-coated maps, rice paper, vellum, art papers, foils,
tissues, newsprint and most paper.
The Gerber Edge is the only digital imaging system that offers: The Gerber Edge 2 continues the Gerber Edge revolution with everything one
• Output that's outdoor durable and ready to apply could expect from the classic Gerber Edge, only better. It has all the same features
as the Gerber Edge, but with these new additional improvements:
• Cut any shape around any printed image with a Gerber 15"
Edge-compatible plotter • Print speed up to three times faster
• Print on a wide variety of Edge Ready materials • Improved pixel placement through the use of advanced thermal
management techniques and finely tuned Edge Ready materials
• Continuous length printing and automatic paneling of large images and GerberColor foil settings
• A growing array of GerberColor foils, including many spot, medal, • User selectable 600 X 300dpi print mode creates sharper
transparents, finishing, fluorescents plus four-color process printing edge definition and more colors. (Print speed decreases in this mode)
to use in any combination
• Prints onto all Edge Ready materials
• Proven in production environments worldwide
• Prints with all GerberColor and Gerber ColorSet foil cartridges
• 20" per minute per color print speed, 95 sq. ft. of printing per hour for
Additional benefits include: one-color printing, 22 sq. ft. per hour for four-color printing
• Gerber Edge graphics are printed dry and are outdoor • 11.8" wide print width per pass. Larger images can be paneled
durable for three to five years without lamination or any with the Omega paneling feature
post-printing processes • Budget friendly, entry-level price
• Print menu boards full of text in minutes onto removable vinyl
• Prints directly onto dozens of Edge Ready vinyls and
Graphics
other specialty materials A Great Choice:
• Use spot color printing to create decals with a custom cut around the outside Whether the Gerber Edge 2 is chosen for its sheer performance and state-of-the-art
transfer process control features or the Gerber Edge for its value and solid reputation,
• After Gerber Edge graphics are printed, graphics can be cut on any both feature versatility in depth. It's a trait with the Gerber Edge family.
Gerber Edge-compatible, 15" sprocketed plotter
• Add a blast of photography to an otherwise dull sign, using Gerber Edge Catalog
process color printing Number Description Volts
• Simulate traditional airbrush and beveled effects by printing spot colors P60067A Gerber Edge 115
onto colored vinyls; more than 50 GerberColor foil cartridge colors are P70567A Gerber Edge 2 110/115
currently available
• Use GerberColor Spectratone to create thousands of solid, rich colors.
Perfect for matching corporate and other specified colors
• Use the same file to add a logo to a delivery van or to generate
palm-sized decals and create small, medium and large graphics
with the automatic paneling capability GERBER EDGE ACCESSORIES
• The Gerber Edge has been in use for years and is backed by Gerber
Catalog
Number Description
P50504A Shielded Printer Cable, 15'
P66530B Thermal Print Head Cleaning Card, 25/Box
P50099A Lint-Free Cloth
P50508A Power Cord
P50136B Registration Eyepiece
Gerber has spent many years perfecting a complete system of equipment and materials designed for the highest quality output. Gerber designed and developed the GerberColor™
foil series, which is an integral component of the Matched Technology System (MTS), designed to work with the Gerber Edge and Edge II. Gerber's dedication to the
creation of the GerberColor™ foil series has brought to Edge owners more capabilities and features than anyone else; Color accuracy that brings process color Edge output
to life, outstanding print quality on the widest array of substrates, superior halftones, gradient fills and the most complete foil coverage for color replication. Only Gerber
provides the complete system of equipment, materials and unrivaled technical assistance which equals the Gerber Matched Technology System.
Graphics
Gothic Black P52764A Yankee Doodle P50740A NOTE: (1)
Requires GA release 6.0 or higher.
Gradual P55418A Zany Connected P57216A (2)
Indicates Edge fonts included with GA Rev 6.2 and upgrades to GA 6.2
Festival P69774A Hot Chilies P69780A
Lazydaze P69776A Stone P69778A
Gerber offers a wide range of materials, identified by the Edge Ready™ symbol, designed and approved for use in the Gerber Edge. Edge Ready™ printing materials can
be found throughout this section.
Point of Purchase Displays
and Floor Graphics
T-Shirts, Uniforms
Outdoor Durable
and Caps
Banners
Back-Lit Signs
Exhibit Graphics and Displays
Ad Specialty Magnets
Sequentially
and Short Run Decals
Numbered Labels
Vehicle
Graphics
Plotter Options:
Long Sign Material Catcher
Outstanding Performance:
Available for FasTrack models 650, 750, 1000 and 1300. Keeps material clean
At speeds up to 36" per second and 3G acceleration, the enVision ensures that and collects cut off material.
even the most unwieldy jobs are precisely cut every time. The Gerber enVision is
a great performer, powering through workloads, quickly and precisely. Pounce tool:
Available for the Odyssey. Used for print models of Gerber enVision and FasTrack
plotters and GS15plus Plotters.
High Performance Servo Drive:
Illuminated Target Locator:
Continuous, automatic system monitoring assures a precision cut at every position,
at any velocity. With the enVision, the user is always in control and assured of Available for the Odyssey. Used for point-to-cut target registration of Maxx graphics.
maximum performance.
Plotter Stand:
Available for all models of FasTrack plotters. Assists with proper material
tracking.
INTERSTATE ELECTRIC CO., INC.
2240 Yates Ave., Commerce, CA 90040 • 5435 Procyon, #100, Las Vegas, NV 89118 • 6860 Goodyear Rd., Benicia, CA 94510
E-5
Graphics
and make every job look great. There are no messy liquids, toners or other Ready media, operation is unattended. Productivity gets a further boost because
chemicals to handle or dispose of. Job set-up is fast and simple. Compare this Maxx 2 output needs no post-imaging processes like lamination or encapsulation
with high maintenance requirements of other digital imaging systems and Maxx to deliver outdoor durability. Fewer process steps mean less operator time per
2 looks even better. job, higher throughput and better profit opportunities.
P70693A Apple Green 328 being transparent. This unique transparent feature allows the characteristics of
P70696A Aqua 328
P70658A Beige 1640
the base Maxx Ready material to come through and be enhanced. Reflectives
P70656A Brown 1640 reflect, metallics sparkle, chrome-finished films shine bright and translucents light
P70650A Burgndy 1640 up like never before. MCT foils can also be used on opaque films for traditional
P70706A Champagne Gold 328 spot color applications. MCT Series foils are completely compatible with all Maxx
P70705A Copper 328 Ready materials and Maxx Color foils.
P70662A Dark Gray 1640
Catalog Length
P70694A Dark Green 328 Number Color (Feet)
P70649A Forest Green 1640
P70757A Intense Red 1640 MCT617-100 Transparent Blue 328
P70655A Kelly Green 1640 MCT629-100 Transparent Brown 328
P70661A Lemon Yellow 1640 MCT105-100 Transparent Gold 328
P70697A Light Purple 328 MCT116-100 Transparent Green 328
P70660A Navy 1640 MCT643-100 Transparent Red 328
P70701A Pink 328 MCT37-100 Transparent Sapphire Blue 328
P70654A Purple 1640 MCT13-100 Transparent Tomato Red 328
P70652A Sunflower Yellow 1640 MCT625-100 Transparent Yellow 328
Catalog
Automatic Material Alignment: Number Description
The Odyssey takes the guesswork out of lining up your material. Simply load P71803A Gerber Odyssey 48" Plotter, 115 Volt
material onto the plotter and material will align quickly and precisely, at the press P63681B 30" Knife Blades, Set of 2
of a key. P63679B 45" Knife Blades, Set of 2
P63680B 60" Knife Blades, Set of 2
Active Tracking Control: P67579A Cable, PC to Plotter, 15'
P72400A Cleaning Brush
Odyssey continues to work while the job is running, ensuring that it tracks and P69653D Cut-Off Mat, 48"
cuts correctly the first time. P68430B Cutting Strip, 48"
P72100C Illuminated Target Locator
P32945A Material End Plug
Exceptional Material Flexibility: P61643A Pen, Rollerball Black, Set of 4
The Odyssey delivers first-class material utilization, giving the flexibly to cut to 49" P61644A Pen, Rollerball Blue, Set of 4
wide. A wide range of material widths, rolls, sheets and even scraps from 4" up P61646A Pen, Rollerball Green, Set of 4
P61645A Pen, Rollerball Red, Set of 4
to 52" can be loaded. Plus cutting force is easily adjustable up to 16 ounces, P72613A Pounce Mat
allowing one to work with a large assortment of materials from lightweight P72482A Pounce Mat & Tool Kit
Graphics
masking films, to pressure-sensitive vinyls, to tough materials such as reflectives P73828B Pounce Tool
and sandblast stencils. P67283B Registration Eyepiece
P65916B Swivel Knife Assembly w/45" Blade
Outstanding Performance:
At speeds up to 36 inches per second and 3G acceleration, the Odyssey powers
through even most demanding work loads. Also features automatic cut off and
tool setting, material measurement routine, repeats up to 9,999, Gerber MAXX
cutting solution and cut, pounce and pen functions.
3M SCOTCHCAL SERIES 225 PREMIUM FILM 3M SCOTCHCAL SERIES 231 TRANSLUCENT FILM
NON-PERFORATED NON-PERFORATED
Catalog Catalog
Number Description Width Length Number Description Width Length
P71364A Maxx Ready White Film 36" 50 Yards P73973A Maxx Ready White Film 36" 10 Yards
P73974A Maxx Ready White Film 36" 50 Yards
P71323A Maxx Ready Clear Film 36" 10 Yards
P71365A Maxx Ready Clear Film 36" 50 Yards
NON-PERFORATED NON-PERFORATED
Catalog Catalog
Number Description Width Length Number Description Width Length
P71384A Series 4000 White Film 36" 50 Yards P74194A Maxx Ready White Film 36" 25 Yards
3M CONTROLTAC 250C WITH COMPLY PERFORMANCE MAXX READY OVERLAMINATES UV GERBER GUARD
NON-PERFORATED NON-PERFORATED
Catalog Catalog
Number Description Width Length Number Description Width Length
P71348A White Film 36" 10 Yards P73547A UVGuard Overlaminate 36" 10 Yards
P71390A White Film 36" 50 Yards P73548A UVGuard Overlaminate 36" 50 Yards
SERIES 220
PREMIUM 3M SCOTCHCAL FILM
High performance 2 mil cast vinyl specifically developed for Gerber by 3M for optimal cutting, weeding and application. Clear pressure sensitive adhesive allows production
of attractive two-way marking. Excellent durability with five-to-seven year exterior life. Other widths and colors also available.
Perforated Rolls Non-Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 30" x 10 yd 30" x 50 yd
Matte White P20867C P20868C P21915C P20959C P58333A P58433A
White P20853C P20854C P21919C P20963C P58334A P58434A
Matte Black P20871C P20872C P21916C P20960C P58344A P58444A
Black P20855C P20856C P21918C P20962C P58345A P58445A
Antique White P53024A P53044A P53064A P53084A P58335A P58435A
Eggshell P53023A P53043A P53063A P53083A P58336A P58436A
Oyster P53022A P53042A P53062A P53082A P58337A P58437A
Palm Oyster P53020A P53040A P53060A P53080A P58338A P58438A
Pearl Grey P20869C P20870C P21930C P21974C P58339A P58439A
Medium Grey P27325A P27326A P27363A P27364A P58340A P58440A
Traffic Grey P53036A P53056A P53076A P53096A P58341A P58441A
Dark Grey P27327A P27328A P27365A P27366A P58342A P58442A
Nimbus Grey P53035A P53055A P53075A P53095A P58343A P58443A
Duranodic P57480A P57495A P57510A P57525A P58346A P58446A
DeepMahoganyBrn. P20851C P20852C P21925C P20969C P58347A P58447A
Russet Brown P27491A P27492A P27493A P27494A P58348A P58448A
Saddle Brown P35320A P35321A P35342A P35343A P58349A P58449A
Sandstone P27331A P27332A P27369A P27370A P58350A P58450A
Graphics
Tan P20883C P20884C P21926C P20970C P58351A P58451A
Beige P20885C P20886C P21914C P20958C P58352A P58452A
Fawn P27333A P27334A P27371A P27372A P58353A P58453A
Primrose Yellow P57477A P57492A P57507A P57522A P58354A P58454A
Bright Yellow P20861C P20862C P21921C P20965C P58355A P58455A
Sunflower P27495A P27496A P27497A P27498A P58356A P58456A
Chrome Yellow P57478A P57493A P57508A P57523A P58357A P58457A
Imitation Gold P27337A P27338A P27375A P27376A P58358A P58458A
Apricot P27339A P27340A P27377A P27378A P58359A P58459A
Coral P53029A P53049A P53069A P53089A P58360A P58460A
Dark Coral P53030A P53050A P53070A P53090A P58361A P58461A
Light Orange P27499A P27500A P27501A P27502A P58362A P58462A
Bright Orange P20863C P20864C P21923C P20967C P58363A P58463A
Intense Orange P53026A P53046A P53066A P53086A P58364A P58464A
Terra Cotta P27341A P27342A P27379A P27380A P58365A P58465A
Salmon Pink P35322A P35323A P35344A P35345A P58366A P58466A
Mauve P35324A P35325A P35346A P35347A P58367A P58467A
Magenta P27343A P27344A P27381A P27382A P58368A P58468A
Process Magenta P53034A P53054A P53074A P53094A P58369A P58469A
Warm Red P53027A P53047A P53067A P53087A P58370A P58470A
Matte Red P57481A P57496A P57511A P57526A P58371A P58471A
Perfect Match Red P53025A P53045A P53065A P53085A P58372A P58472A
SERIES 220
PREMIUM 3M SCOTCHCAL FILM cont.
SERIES 220
PREMIUM 3M SCOTCHCAL FILM cont.
SERIES 220
METALLIC FILM
High performance 2 mil cast vinyl with the visual addition of a metallic sparkle. These films are perfect for use on cars, trucks, boats, RV's and signs.
Graphics
Excellent durability with five-to-seven year exterior life. Other widths also available.
Perforated Rolls Non-Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 30" x 10 yd 30" x 50 yd
Silver P27359A P27360A P27397A P27398A P58432A P58532A
Gold P27357A P27358A P27395A P27396A P58431A P58531A
Light Gold P31813A P31814A P31858A P31859A P58430A P58530A
Sage Green P31843A P31844A P31888A P31889A P58419A P58519A
Pine Green P31840A P31841A P31885A P31886A P58420A P58520A
Dark Blue P31828A P31829A P31873A P31874A P58421A P58521A
Bright Blue P31831A P31832A P31876A P31877A P58422A P58522A
Silver Blue P31834A P31835A P31879A P31880A P58423A P58523A
Charcoal P31801A P31802A P31846A P31847A P58424A P58524A
Slate P31837A P31838A P31882A P31883A P58425A P58525A
Burgundy P31819A P31820A P31864A P31865A P58426A P58526A
Light Rose P31816A P31817A P31861A P31862A P58427A P58527A
Dark Brown P31804A P31805A P31849A P31850A P58428A P58528A
Copper P31810A P31811A P31855A P31856A P58429A P58529A
SERIES 230
TRANSLUCENT VINYL FILM
High performance 2 mil cast vinyl designed for use on internally illuminated signs, awnings and window graphics. Features uniform color with a surface finish to
eliminate glare. Five year exterior life.
Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd
White P20921C P20922C P21948C P20992C
Ivory P21028C P21029C P22299C P22300C
Light Beige P37721A P37707A P37693A P37679A
Silver P43249A P43250A P43257A P43258A
Silver Gray P37714A P37700A P37686A P37672A
Shadow Gray P37719A P37705A P37691A P37677A
State Gray P37716A P37702A P37688A P37674A
Black P37708A P37694A P37680A P37666A Perforated Rolls
Rust Brown P20911C P20912C P21943C P20987C Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd
Dark Brown P20919C P20920C P21947C P20991C Metallic Gold (1)
P37712A P37698A P37684A P37670A
Duranodic P20913C P20914C P21944C P20988C Sunflower P30806A P30807A P30818A P30819A
Burgundy P21026C P21027C P22297C P22298C Mango P51448A P51462A P51476A P51490A
Raspberry P37710A P37696A P37682A P37668A Yellow P20905C P20906C P21940C P20984C
Mulberry P51447A P51461A P51475A P51489A Lemon Yellow P51445A P51459A P51473A P51487A
Vivid Rose P37713A P37699A P37685A P37671A Emerald Green P51449A P51463A P51477A P51491A
Pink Lavender P51444A P51458A P51472A P51486A Holly Green P30814A P30815A P30826A P30827A
Cardinal Red P30810A P30811A P30822A P30823A Green P20903C P20904C P21939C P20983C
Dark Red P20917C P20918C P21946C P20990C Bright Jade Green P51446A P51460A P51474A P51488A
Graphics
Scarlet Red P51441A P51455A P51469A P51483A Vivid Green P37715A P37701A P37687A P37673A
Red P20909C P20910C P21942C P20986C Kelly Green P51452A P51466A P51480A P51494A
Light Tomato Red P30808A P30809A P30820A P30821A Apple Green P51443A P51457A P51471A P51485A
Poppy Red P37711A P37697A P37683A P37669A Teal P43253A P43254A P43261A P43262A
Orange P20907C P20908C P21941C P20985C Turquoise P43251A P43252A P43259A P43260A
Tangerine P37717A P37703A P37689A P37675A Dark Blue P21030C P21031C P22301C P22302C
Kumquat P37718A P36704A P37690A P37676A Royal Blue P20915C P20916C P21945C P20989C
Gold Nugget (1) P51451A P51465A P51479A P51493A Cobalt Blue P51454A P51468A P51482A P51496A
Delft Blue P51442A P51456A P51470A P51484A
Blue P31344A P31345A P31346A P31347A
Intense Blue P37709A P37695A P37681A P37667A
Process Blue P49908A P49909A P49910A P49911A
Deep Sky Blue P51453A P51467A P51481A P51495A
Olympic Blue P30812A P30813A P30824A P30825A
Plum Purple P51450A P51464A P51478A P51492A
NOTE: (1)
3 year exterior life.
SERIES 210
3M SCOTCHCAL FILM
Graphics
has good flexibility and provides excellent conformance to flat or moderately curved surfaces. Seven-year
exterior life on all colors, five-year exterior life on black.
Series 280i white reflective sheeting is designed to provide optimal print results on the Gerber Edge.
Seven-year exterior life.
Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd
Gold P21020C P21021C P21962C P21008C
White (1) P20887C P20888C P21931C P20975C
Black P20899C P20900C P21933C P20977C
Ruby Red P37319A P37320A P37321A P37322A
Red P28494A P28495A P28498A P28499A
Orange P20895C P20896C P21936C P20980C
Lemon Yellow P20893C P20894C P21934C P20978C
Yellow P28496A P28497A P28500A P28501A
Green P20891C P20892C P21937C P20981C
Light Blue P39822A P39823A P39820A P39821A
Blue P20889C P20892C P21932C P20976C
White Series 280i (1) P60923A P60924A - -
NOTE: (1)
Gerber recommends series 280i white reflective sheeting for Edge applications.
Quantum 2000 is a custom formulated, 3.6 mil polymeric calendered vinyl. Quantum 4000 film is a state-of-the-art, 3.6 mil polymeric calnedered vinyl film
An economical, yet extremely versatile product with a five year exterior life. with superior gloss and high performance qualities designed to withstand severe
Other widths also available. weather and handling conditions. Features a clear adhesive and is therefore
suitable for use as a cut vinyl in window or transparent substrate applications.
Perforated Rolls
An economical, yet extremely versatile product with a six year exterior life.
Color 15" x 50 yd 30" x 50 yd Other widths also available.
Matte White P69021A P69147A Perforated Rolls
White P69016A P69142A Color 15" x 50 yd 30" x 50 yd
Matte Black P69023A P69149A
Black P69017A P69143A Black P68576A P68816A
White P68575A P68815A
Brown P69035A P69161A Beige P68592A P68832A
Beige P69032A P69158A
Yellow P69020A P69146A Bright Green P68594A P68834A
Bright Yellow P68583A P68823A
Orange P69030A P69156A Burgundy P68584A P68824A
Tomato Red P69024A P69150A
Red P69018A P69144A Cardinal Red P68577A P68817A
Dark Gray P68595A P68835A
Burgundy P69026A P69152A Dark Green P68585A P68825A
Fuchsia P69036A P69162A
Purple P69028A P69154A Forest Green P68588A P68828A
Gold P68580A P68820A
Navy P69034A P69160A Imitation Gold P68598A P68838A
Sapphire Blue P69019A P69145A
Blue P69022A P69148A Intense Red P68600A P68840A
Light Blue P68599A P68839A
Olympic Blue P69033A P69159A Lime Green P68604A P68844A
Teal P69029A P69155A
Graphics
METALLIZED
POLYESTER FILM
Polyester, 1 or 2 mil film, for use in the Gerber Edge for the production of display graphics, labels, Polyester, 2 or 3 mil film with mirror look for interior and limited
decals and identification nameplates. Both products feature a brushed, metallized finish and are not exterior use. One to two-year life on Silver and Brushed Aluminum.
recommended for exterior use. Gold polyesters are not recommended for exterior use.
Perforated Rolls Perforated Rolls
1 MIL 2 MIL Color 15" x 10 yd 15" x 50 yd
Color 15" x 10 yd 15" x 50 yd 15" x 10 yd 15" x 50 yd Shiny Gold P21014C P21015C
w/Silver Backing
Brushed Gold P61297A P61296A P61288A P61289A
Shiny Gold P26697A P26696A
Brushed Silver P61300A P61299A P61285A P61286A w/Gold Backing
Brushed Aluminum P21016C P21017C
Shiny Sliver P21018C P21019C
SPECIALTY PRINTING
MATERIALS
Graphics
also be decorated with vinyl graphics. GerberColor cartridges. exterior life.
Perforated Rolls Perforated Rolls Perforated Rolls
Color 15" x 10 yd 15" x 50 yd Color 15" x 10 yd 15" x 50 yd Color 15" x 10 yd 15" x 50 yd
Clear P50823A P50824A Clear P54964A P54965A Clear P27323A P27324A
White P53201A P53202A
GERBER GLOW LUMINOUS FILM Available in four different patterns that range from mirror finish to prismatic rays.
These vinyls create a spectrum of colors that add dynamic effects to graphics.
13mil, durable glow-in-the-dark vinyl custom formulated for use with the Gerber Edge Can be over printed with GCT transparent foils for spectacular effects. Also
in the production of graphics that are visible in total darkness. Luminous Film glows available in custom widths.
for up to 6 hours and takes only 3 minutes of light exposure to recharge. Ideal
for emergency and exit signage as well as general signs that demand maximum Perforated Rolls
visibility. Available in luminous green only. Pattern 15" x 10 yd 15" x 50 yd
GERBER
EDGE READY SPECIALTY MATERIAL cont.
Graphics
15" x 10 yd Roll 15" x 50 yd Roll
P65579A P65580A
Polished version of LexEdge II with a removable protective mask on the print side.
Ideal for use in architectural signage, point-of-purchase displays, exhibit graphics
and membrane switches.
INSTACHANGE REMOVABLE VINYL FILM Perforated Rolls
15" x 10 yd 15" x 50 yd
White 4 mil material that provides Edge users with a material solution for graphics,
decals and labels that require a strong bond, yet must be easily removed and P67002A P67003A
changed with a new marking. Simply remove and replace for up to two years
with no adhesive residue.
GERBER
EDGE READY SPECIALTY MATERIAL cont.
GERBER
SPECIALTY MATERIAL
GERBERMASK I
GerberMask I is a 4 mil, white vinyl film coated with a low tack removable adhesive. Designed to be used as a stencil masking film for application to a variety of
smooth, flat substrates. The low-tack adhesive allows for easy removal with no adhesive transfer and easy removal from high energy surfaces. Suitable for use on
glass, acrylic, polycarbonate, flexible vinyl or stainless steel.
Perforated Rolls Non-Perforated Rolls
Description 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 20" x 10 yd 20" x 50 yd 45" x 10 yd 45" x 50 yd
GerberMask I P28484A P28485A P28486A P28487A P59448A P59449A P59454A P59455A
Standard Tack Adhesive
Red Logo Printed on Liner
GERBERMASK II
GerberMask II is a durable, conformable 4 mil white vinyl film coated with an aggressive acrylic removable adhesive. Designed to hold during light sandblasting, acid
etching or paint applications. Easily removable with no adhesive transfer. Suitable for use on glass, Acrylic, polycarbonate, flexible vinyl, stainless steel and unfinished or
finished wood surfaces. Not for application on flexible vinyl film. GerberMask II will adhere strongly to smooth, high energy surfaces such as Acrylic and polycarbonate.
GerberMask II requires some effort to remove.
Perforated Rolls Non-Perforated Rolls
Description 15" x 50 yd 30" x 50 yd 20" x 50 yd 30" x 50 yd 45" x 50 yd
GerberMask II P35872A P37055A P59457A P59459A P59461A
High Tack Adhesive
Blue Logo Printed on Liner
Graphics
SCREENPRINTING & GRAPHIC ARTS FILMS SANDBLASTING MASK
Carefully selected materials designed for screenprinting. Developed for use on Gerber systems. Single or double liner, rubber masking stencil
for sandblasting on stone, glass and hard or soft
Perforated Rolls
Description 15" x 25 ft 15" x 50 yd 30" x 25 ft 30" x 50 yd Perforated Rolls
Description 15" x 10 yd 30" x 10 yd
Ulano Rubylith G3GR P21038C P21039C P26930A P26931A
Ulano Rubylith RM3 P20946C P20947C P21958C P21002C 3M Scotch Brand #521 P47527A P47529A
One-liner for
Ulano Amberlith A3A P20948C P20949C P21959C P21003C Stone and Wood
Ulano Cut Green P20950C P20951C P21960C P21004C
Ulano S3S-StaSharp P20952C P20953C P21961C P21005C 3M Scotch Brand #522 P47528A P47530A
Two-liner for
Stone and Wood
High performance 2 mil cast vinyl. Increased productivity provided by a unique liner design for easier cutting, faster consistent weeding and effortless character transfer.
Excellent durability for seven years. Vinyl has been removed from the perforated margin for trouble free feeding. Other widths also available.
Perforated Rolls Non-Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 20" x 50 yd 24" x 50 yd 48" x 50 yd
Clear 2200-1503-00 2200-1515-00 2200-3003-00 2200-3015-00 2100-2015-00 2100-2415-00 2100-4815-00
Red 2200-1503-01 2200-1515-01 2200-3003-01 2200-3015-01 2100-2015-01 2100-2415-01 2100-4815-01
White 2200-1503-02 2200-1515-02 2200-3003-02 2200-3015-02 2100-2015-02 2100-2415-02 2100-4815-02
Black 2200-1503-03 2200-1515-03 2200-3003-03 2200-3015-03 2100-2015-03 2100-2415-03 2100-4815-03
Gold Metallic 2200-1503-04 2200-1515-04 2200-3003-04 2200-3015-04 2100-2015-04 2100-2415-04 2100-4815-04
Blue 2200-1503-05 2200-1515-05 2200-3003-05 2200-3015-05 2100-2015-05 2100-2415-05 2100-4815-05
Yellow 2200-1503-06 2200-1515-06 2200-3003-06 2200-3015-06 2100-2015-06 2100-2415-06 2100-4815-06
Silver Metallic 2200-1503-07 2200-1515-07 2200-3003-07 2200-3015-07 2100-2015-07 2100-2415-07 2100-4815-07
Brown 2200-1503-08 2200-1515-08 2200-3003-08 2200-3015-08 2100-2015-08 2100-2415-08 2100-4815-08
Dark Blue 2200-1503-11 2200-1515-11 2200-3003-11 2200-3015-11 2100-2015-11 2100-2415-11 2100-4815-11
Burgundy 2200-1503-12 2200-1515-12 2200-3003-12 2200-3015-12 2100-2015-12 2100-2415-12 2100-4815-12
Tomato Red 2200-1503-14 2200-1515-14 2200-3003-14 2200-3015-14 2100-2015-14 2100-2415-14 2100-4815-14
Sapphire Blue 2200-1503-17 2200-1515-17 2200-3003-17 2200-3015-17 2100-2015-17 2100-2415-17 2100-4815-17
Olympic Blue 2200-1503-18 2200-1515-18 2200-3003-18 2200-3015-18 2100-2015-18 2100-2415-18 2100-4815-18
Smoke Metallic 2200-1503-21 2200-1515-21 2200-3003-21 2200-3015-21 2100-2015-21 2100-2415-21 2100-4815-21
Charcoal Metallic 2200-1503-23 2200-1515-23 2200-3003-23 2200-3015-23 2100-2015-23 2100-2415-23 2100-4815-23
Dark Green 2200-1503-24 2200-1515-24 2200-3003-24 2200-3015-24 2100-2015-24 2100-2415-24 2100-4815-24
Oyster 2200-1503-26 2200-1515-26 2200-3003-26 2200-3015-26 2100-2015-26 2100-2415-26 2100-4815-26
Graphics
Graphics
Bright Orange 2200-1503-83 2200-1515-83 2200-3003-83 2200-3015-83 2100-2015-83 2100-2415-83 2100-4815-83
Eggshell 2200-1503-84 2200-1515-84 2200-3003-84 2200-3015-84 2100-2015-84 2100-2415-84 2100-4815-84
Cocoa 2200-1503-85 2200-1515-85 2200-3003-85 2200-3015-85 2100-2015-85 2100-2415-85 2100-4815-85
Forest Green 2200-1503-86 2200-1515-86 2200-3003-86 2200-3015-86 2100-2015-86 2100-2415-86 2100-4815-86
Aqua Green 2200-1503-87 2200-1515-87 2200-3003-87 2200-3015-87 2100-2015-87 2100-2415-87 2100-4815-87
Mint Green 2200-1503-88 2200-1515-88 2200-3003-88 2200-3015-88 2100-2015-88 2100-2415-88 2100-4815-88
Aqua Blue 2200-1503-89 2200-1515-89 2200-3003-89 2200-3015-89 2100-2015-89 2100-2415-89 2100-4815-89
Wedgewood Blue 2200-1503-92 2200-1515-92 2200-3003-92 2200-3015-92 2100-2015-92 2100-2415-92 2100-4815-92
Light Navy 2200-1503-93 2200-1515-93 2200-3003-93 2200-3015-93 2100-2015-93 2100-2415-93 2100-4815-93
Sandust Clay 2200-1503-94 2200-1515-94 2200-3003-94 2200-3015-94 2100-2015-94 2100-2415-94 2100-4815-94
Tangerine 2200-1503-96 2200-1515-96 2200-3003-96 2200-3015-96 2100-2015-96 2100-2415-96 2100-4815-96
Light Orange 2200-1503-97 2200-1515-97 2200-3003-97 2200-3015-97 2100-2015-97 2100-2415-97 2100-4815-97
Slate Green 2200-1503-98 2200-1515-98 2200-3003-98 2200-3015-98 2100-2015-98 2100-2415-98 2100-4815-98
Bright Purple 2200-1503-99 2200-1515-99 2200-3003-99 2200-3015-99 2100-2015-99 2100-2415-99 2100-4815-99
Medium Green 2200-1503106 2200-1515106 2200-3003106 2200-3015106 2100-2015106 2100-2415106 2100-4815106
Pearl 2200-1503120 2200-1515120 2200-3003120 2200-3015120 2100-2015120 2100-2415120 2100-4815120
Bottle Green 2200-1503230 2200-1515230 2200-3003230 2200-3015230 2100-2015230 2100-2415230 2100-4815230
Intense Blue 2200-1503250 2200-1515250 2200-3003250 2200-3015250 2100-2015250 2100-2415250 2100-4815250
Terra Cotta 2200-1503280 2200-1515280 2200-3003280 2200-3015280 2100-2015280 2100-2415280 2100-4815280
Cal-Plus is a 3 mil calendered vinyl. Its Calon II adhesive system is compatible with the most popular PVC banners and rigid sign faces and is dimensionally stable to
resist shrinkage. An excellent value for cost-sensitive projects with an outdoor durability of five years. Also available in 48" width non-perforated rolls. Gloss finish also
available in selected colors
Perforated Rolls Perforated (1) Non-Perforated Rolls
Color 15" x 50 yd 30" x 50 yd 30" x 50 yd 15" x 50 yd 20" x 50 yd 24" x 50 yd 30" x 50 yd 60" x 50 yd
Red 4550-1515-01 4550-3015-01 4570-3015-01 4500-1515-01 4500-2015-01 4500-2415-01 4500-3015-01 4500-6015-01
White 4550-1515-02 4550-3015-02 4570-3015-02 4500-1515-02 4500-2015-02 4500-2415-02 4500-3015-02 4500-6015-02
Black 4550-1515-03 4550-3015-03 4570-3015-03 4500-1515-03 4500-2015-03 4500-2415-03 4500-3015-03 4500-6015-03
Gold Medal 4550-1515-04 4550-3015-04 4570-3015-04 4500-1515-04 4500-2015-04 4500-2415-04 4500-3015-04 4500-6015-04
Blue 4550-1515-05 4550-3015-05 4570-3015-05 4500-1515-05 4500-2015-05 4500-2415-05 4500-3015-05 4500-6015-05
Yellow 4550-1515-06 4550-3015-06 4570-3015-06 4500-1515-06 4500-2015-06 4500-2415-06 4500-3015-06 4500-6015-06
Silver 4550-1515-07 4550-3015-07 4570-3015-07 4500-1515-07 4500-2015-07 4500-2415-07 4500-3015-07 4500-6015-07
Brown 4550-1515-08 4550-3015-08 4570-3015-08 4500-1515-08 4500-2015-08 4500-2415-08 4500-3015-08 4500-6015-08
Orange 4550-1515-09 4550-3015-09 4570-3015-09 4500-1515-09 4500-2015-09 4500-2415-09 4500-3015-09 4500-6015-09
Purple 4550-1515-10 4550-3015-10 4570-3015-10 4500-1515-10 4500-2015-10 4500-2415-10 4500-3015-10 4500-6015-10
Green 4550-1515-11 4550-3015-11 4570-3015-11 4500-1515-11 4500-2015-11 4500-2415-11 4500-3015-11 4500-6015-11
Burgundy 4550-1515-12 4550-3015-12 4570-3015-12 4500-1515-12 4500-2015-12 4500-2415-12 4500-3015-12 4500-6015-12
Dark Blue 4550-1515-30 4550-3015-30 4570-3015-30 4500-1515-30 4500-2015-30 4500-2415-30 4500-3015-30 4500-6015-30
Rose 4550-1515-31 4550-3015-31 4570-3015-31 4500-1515-31 4500-2015-31 4500-2415-31 4500-3015-31 4500-6015-31
Cotton Candy 4550-1515-32 4550-3015-32 4570-3015-32 4500-1515-32 4500-2015-32 4500-2415-32 4500-3015-32 4500-6015-32
Fire Red 4550-1515-33 4550-3015-33 4570-3015-33 4500-1515-33 4500-2015-33 4500-2415-33 4500-3015-33 4500-6015-33
Cloud Gray 4550-1515-34 4550-3015-34 4570-3015-34 4500-1515-34 4500-2015-34 4500-2415-34 4500-3015-34 4500-6015-34
Imperial Green 4550-1515-35 4550-3015-35 4570-3015-35 4500-1515-35 4500-2015-35 4500-2415-35 4500-3015-35 4500-6015-35
Graphics
Mission Blue 4550-1515-36 4550-3015-36 4570-3015-36 4500-1515-36 4500-2015-36 4500-2415-36 4500-3015-36 4500-6015-36
Blueberry 4550-1515-37 4550-3015-37 4570-3015-37 4500-1515-37 4500-2015-37 4500-2415-37 4500-3015-37 4500-6015-37
Evening Blue 4550-1515-38 4550-3015-38 4570-3015-38 4500-1515-38 4500-2015-38 4500-2415-38 4500-3015-38 4500-6015-38
Lt. Wedgewood Blue 4550-1515-39 4550-3015-39 4570-3015-39 4500-1515-39 4500-2015-39 4500-2415-39 4500-3015-39 4500-6015-39
Matte Black 4550-1515-40 4550-3015-40 4570-3015-40 4500-1515-40 4500-2015-40 4500-2415-40 4500-3015-40 4500-6015-40
Tusk 4550-1515-41 4550-3015-41 4570-3015-41 4500-1515-41 4500-2015-41 4500-2415-41 4500-3015-41 4500-6015-41
Mint 4550-1515-42 4550-3015-42 4570-3015-42 4500-1515-42 4500-2015-42 4500-2415-42 4500-3015-42 4500-6015-42
Fluorite Green 4550-1515-43 4550-3015-43 4570-3015-43 4500-1515-43 4500-2015-43 4500-2415-43 4500-3015-43 4500-6015-43
Billiard 4550-1515-45 4550-3015-45 4570-3015-45 4500-1515-45 4500-2015-45 4500-2415-45 4500-3015-45 4500-6015-45
Persian Melon 4550-1515-46 4550-3015-46 4570-3015-46 4500-1515-46 4500-2015-46 4500-2415-46 4500-3015-46 4500-6015-46
Matte White 4550-1515-49 4550-3015-49 4570-3015-49 4500-1515-49 4500-2015-49 4500-2415-49 4500-3015-49 4500-6015-49
Royal Blue 4550-1515-50 4550-3015-50 4570-3015-50 4500-1515-50 4500-2015-50 4500-2415-50 4500-3015-50 4500-6015-50
Spring Green 4550-1515-60 4550-3015-60 4570-3015-60 4500-1515-60 4500-2015-60 4500-2415-60 4500-3015-60 4500-6015-60
Medium Green 4550-1515-61 4550-3015-61 4570-3015-61 4500-1515-61 4500-2015-61 4500-2415-61 4500-3015-61 4500-6015-61
Daisy Yellow 4550-1515-68 4550-3015-68 4570-3015-68 4500-1515-68 4500-2015-68 4500-2415-68 4500-3015-68 4500-6015-68
Teal 4550-1515-71 4550-3015-71 4570-3015-71 4500-1515-71 4500-2015-71 4500-2415-71 4500-3015-71 4500-6015-71
NOTE: (1)
1/2" Perforated pattern.
PromoCal Gloss is a 3 mil calendered polymeric PVC vinyl applicable for general substrates, banners and interior graphics with superior cutting and weeding for improved
productivity. Recommended for interior use with durability of three to five years. Non-perforated 20", 24", 48" and 60" rolls also available.
Perforated Rolls Perforated Rolls
Color 15" x 50 yd 30" x 50 yd Color 15" x 50 yd 30" x 50 yd
Red 1950-1515101 1950-3015101 Fire Red 1950-1515118 1950-3015118
White 1950-1515102 1950-3015102 Light Blue 1950-1515122 1950-3015122
Black 1950-1515103 1950-3015103 Sapphire Blue 1950-1515124 1950-3015124
Gold 1950-1515104 1950-3015104 Light Navy 1950-1515125 1950-3015125
Blue 1950-1515105 1950-3015105 Navy Blue 1950-1515126 1950-3015126
Yellow 1950-1515106 1950-3015106 Emerald Green 1950-1515132 1950-3015132
Silver 1950-1515107 1950-3015107 Bright Green 1950-1515136 1950-3015136
Brown 1950-1515108 1950-3015108 Daisy Yellow 1950-1515140 1950-3015140
Orange 1950-1515109 1950-3015109 Dark Pink 1950-1515150 1950-3015150
Royal Purple 1950-1515110 1950-3015110 Light Gray 1950-1515160 1950-3015160
Green 1950-1515111 1950-3015111 Sunflower 1950-1515164 1950-3015164
Burgundy 1950-1515112 1950-3015112 Medium Gray 1950-1515168 1950-3015168
Tomato Red 1950-1515114 1950-3015114 Teal 1950-1515171 1950-3015171
SPECIALTY FILMS
Graphics
FLUORESCENT VINYL FILM METALLIZED POLYESTER FILM
Multi-laminated cast vinyl with high-intensity color for signs, Brilliant gold and lustrous silver metalized polyester mirror or brushed finished film designed for
graphics and displays. UV stabilized surface protects against indoor applications. Easy to handle with the workability of vinyl. Metalized film has a clear and
sunlight fading. Outdoor durability of one year. permanent adhesive.
Perforated Rolls Perforated Rolls
Color 15" x 10 yd 15" x 50 yd Mirror Finish Brushed Finish
Color 15" x 10 yd 15" x 50 yd 15" x 10 yd 15" x 50 yd
Green 2750-1503-92 2750-1515-92
Red 2750-1503-93 2750-1515-93 Gold 2850-1503-04 2850-1515-04 3950-1503-04 3950-1515-04
Orange 2750-1503-94 2750-1515-94 Silver 2850-1503-07 2850-1515-07 3950-1503-07 3950-1515-07
Yellow 2750-1503-95 2750-1515-95
Pink 2750-1503-97 2750-1515-97
Translucent 2 mil cast vinyl. Its unique Calon II adhesive system ensures that the translucent vinyls remain bonded to outdoor illuminated sign faces. Uniformity
of color within roll and from lot to lot and non-directional sensitivity allows character nesting which saves time and materials. Other specialty colors also available
in limited sizes. Outdoor durability of seven years.
Perforated Rolls Non-Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
Ivory 2550-1503-05 2550-1515-05 2550-3003-05 2550-3015-05 2500-2403-05 2500-2415-05 2500-4803-05 2500-4815-05
Yellow 2550-1503-15 2550-1515-15 2550-3003-15 2550-3015-15 2500-2403-15 2500-2415-15 2500-4803-15 2500-4815-15
White 2550-1503-20 2550-1515-20 2550-3003-20 2550-3015-20 2500-2403-20 2500-2415-20 2500-4803-20 2500-4815-20
Black (2 ) 2550-1503-22 2550-1515-22 2550-3003-22 2550-3015-22 2500-2403-22 2500-2415-22 2500-4803-22 2500-4815-22
Sunflower 2550-1503-25 2550-1515-25 2550-3003-25 2550-3015-25 2500-2403-25 2500-2415-25 2500-4803-25 2500-4815-25
Green 2550-1503-26 2550-1515-26 2550-3003-26 2550-3015-26 2500-2403-26 2500-2415-26 2500-4803-26 2500-4815-26
Red 2550-1503-33 2550-1515-33 2550-3003-33 2550-3015-33 2500-2403-33 2500-2415-33 2500-4803-33 2500-4815-33
Dark Blue 2550-1503-36 2550-1515-36 2550-3003-36 2550-3015-36 2500-2403-36 2500-2415-36 2500-4803-36 2500-4815-36
Lt. Tomato Red 2550-1503-43 2550-1515-43 2550-3003-43 2550-3015-43 2500-2403-43 2500-2415-43 2500-4803-43 2500-4815-43
Orange 2550-1503-44 2550-1515-44 2550-3003-44 2550-3015-44 2500-2403-44 2500-2415-44 2500-4803-44 2500-4815-44
Burgundy 2550-1503-49 2550-1515-49 2550-3003-49 2550-3015-49 2500-2403-49 2500-2415-49 2500-4803-49 2500-4815-49
Silver Gray 2550-1503-51 2550-1515-51 2550-3003-51 2550-3015-51 2500-2403-51 2500-2415-51 2500-4803-51 2500-4815-51
Cardinal Red (1) 2550-1503253 2550-1515253 2550-3003253 2550-3015253 2500-2403253 2500-2415253 2500-4803253 2500-4815253
Olympic Blue 2550-1503-57 2550-1515-57 2550-3003-57 2550-3015-57 2500-2403-57 2500-2415-57 2500-4803-57 2500-4815-57
Dark Brown 2550-1503-59 2550-1515-59 2550-3003-59 2550-3015-59 2500-2403-59 2500-2415-59 2500-4803-59 2500-4815-59
Rust Brown 2550-1503-63 2550-1515-63 2550-3003-63 2550-3015-63 2500-2403-63 2500-2415-63 2500-4803-63 2500-4815-63
Bright Blue 2550-1503-67 2550-1515-67 2550-3003-67 2550-3015-67 2500-2403-67 2500-2415-67 2500-4803-67 2500-4815-67
Graphics
Graphics
Reflective 6.7 mil cast vinyl. An extremely flexible film that cuts and weeds as well as other reflective films with excellent dimensional stability. Ideal for lettering,
striping, die cut logos, highway signage and marine or RV markings. Meets standard specifications such as DOT specification FP-85 - section 718, federal specification
L-S-300C and ASTM-D4956-89. Outdoor durability of seven years on flat surfaces and five years on irregular surfaces.
Perforated Rolls Non-Perforated Rolls
Color 15" x 10 yd 15" x 50 yd 30" x 10 yd 30" x 50 yd 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
Red 2450-1503-01 2450-1515-01 2450-3003-01 2450-3015-01 2400-2403-01 2400-2415-01 2400-4803-01 2400-4815-01
White 2450-1503-02 2450-1515-02 2450-3003-02 2450-3015-02 2400-2403-02 2400-2415-02 2400-4803-02 2400-4815-02
Black 2450-1503-03 2450-1515-03 2450-3003-03 2450-3015-03 2400-2403-03 2400-2415-03 2400-4803-03 2400-4815-03
Gold 2450-1503-04 2450-1515-04 2450-3003-04 2450-3015-04 2400-2403-04 2400-2415-04 2400-4803-04 2400-4815-04
Blue 2450-1503-05 2450-1515-05 2450-3003-05 2450-3015-05 2400-2403-05 2400-2415-05 2400-4803-05 2400-4815-05
Yellow 2450-1503-06 2450-1515-06 2450-3003-06 2450-3015-06 2400-2403-06 2400-2415-06 2400-4803-06 2400-4815-06
Dark Orange 2450-1503-10 2450-1515-10 2450-3003-10 2450-3015-10 2400-2403-10 2400-2415-10 2400-4803-10 2400-4815-10
Green 2450-1503-11 2450-1515-11 2450-3003-11 2450-3015-11 2400-2403-11 2400-2415-11 2400-4803-11 2400-4815-11
NESCHEN
PRO-GLOSS FILM
Pro Gloss is a high-gloss 3 mil polished polymeric flexible calendared film that features superior weeding and transfer characteristics over competitive economical brands.
Recommended for use where a high quality marking film requiring flexibility, durability and resistance to sunlight is essential. Can be used for architectural signage,
commercial/real estate signage, point-of-purchase graphics and decals. 5 year durability under normal exposure. Available in other widths up to 60". Sold by the
roll.
Other types of Neschen vinyl film also available.
SERIES 3630
3M SCOTCHCAL TRANSLUCENT FILM
Durable, dimensionally stable translucent films designed for internally illuminated sign faces, window graphics or on white substrates. Films are uniform in color with
a low surface gloss in either reflected or transmitted light. Intended for flat acrylic, polycarbonate, butyrate, fiberglass, glass, Panaflex series 945 and other prepared
substrates. Can be applied to interior or exterior surfaces of substrates listed. Over-laminating with series 3640 products enhances cleaning and durability. Five year
outdoor performance can be expected, four years in hot sunny areas.
Non-Perforated Rolls
Color 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
Ivory 3630-05-2410 3630-05-2450 3630-05-4810 3630-05-4850
Yellow 3630-15-2410 3630-15-2450 3630-15-4810 3630-15-4850
White 3630-20-2410 3630-20-2450 3630-20-4810 3630-20-4850
Black 3630-22-2410 3630-22-2450 3630-22-4810 3630-22-4850 Non-Perforated Rolls
Sunflower 3630-25-2410 3630-25-2450 3630-25-4810 3630-25-4850 Color 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
Green 3630-26-2410 3630-26-2450 3630-26-4810 3630-26-4850
Pink 3630108-2410 3630108-2450 3630108-4810 3630108-4850
Red 3630-33-2410 3630-33-2450 3630-33-4810 3630-33-4850 Lt. Rust Brown 3630109-2410 3630109-2450 3630109-4810 3630109-4850
Blue 3630-36-2410 3630-36-2450 3630-36-4810 3630-36-4850 Lt. Lemon Yellow3630115-24103630115-24503630115-4810 3630115-4850
Lt. Tomato Red 3630-43-2410 3630-43-2450 3630-43-4810 3630-43-4850
Brt. Jade Green 3630116-2410 3630116-2450 3630116-4810 3630116-4850
Orange 3630-44-2410 3630-44-2450 3630-44-4810 3630-44-4850 Intense Magenta3630118-24103630118-24503630118-4810 3630118-4850
Burgundy 3630-49-2410 3630-49-2450 3630-49-4810 3630-49-4850 Silver (1) 3630121-2410 3630121-2450 3630121-4810 3630121-4850
Silver Grey 3630-51-2410 3630-51-2450 3630-51-4810 3630-51-4850
Golden Yellow 3630125-2410 3630125-2450 3630125-4810 3630125-4850
Cardinal Red 3630-53-2410 3630-53-2450 3630-53-4810 3630-53-4850 Dk.EmeraldGreen 3630126-2410 3630126-2450 3630126-4810 3630126-4850
Olympic Blue 3630-57-2410 3630-57-2450 3630-57-4810 3630-57-4850 Intense Blue 3630127-2410 3630127-2450 3630127-4810 3630127-4850
Dark Brown 3630-59-2410 3630-59-2450 3630-59-4810 3630-59-4850
Plum Purple 3630128-2410 3630128-2450 3630128-4810 3630128-4850
Slate Grey 3630-61-2410 3630-61-2450 3630-61-4810 3630-61-4850 Bronze 3630129-2410 3630129-2450 3630129-4810 3630129-4850
Graphics
Gold Metallic (1) 3630131-2410 3630131-2450 3630131-4810 3630131-4850
Rust Brown 3630-63-2410 3630-63-2450 3630-63-4810 3630-63-4850
Rose Mauve 3630-68-2410 3630-68-2450 3630-68-4810 3630-68-4850 Raspberry 3630133-2410 3630133-2450 3630133-4810 3630133-4850
Lime Green 3630136-2410 3630136-2450 3630136-4810 3630136-4850
Duranodic 3630-69-2410 3630-69-2450 3630-69-4810 3630-69-4850 European Blue 3630137-2410 3630137-2450 3630137-4810 3630137-4850
Shadow Gray 3630-71-2410 3630-71-2450 3630-71-4810 3630-71-4850
Dark Red 3630-73-2410 3630-73-2450 3630-73-4810 3630-73-4850 Gold Nugget 3630141-2410 3630141-2450 3630141-4810 3630141-4850
Poppy Red 3630143-2410 3630143-2450 3630143-4810 3630143-4850
Kumquat Orange 3630-74-2410 3630-74-2450 3630-74-4810 3630-74-4850 Lt. Kelly Green 3630146-2410 3630146-2450 3630146-4810 3630146-4850
Marigold 3630-75-2410 3630-75-2450 3630-75-4810 3630-75-4850
Holly Green 3630-76-2410 3630-76-2450 3630-76-4810 3630-76-4850 Lt.EuropeanBlue 3630147-2410 3630147-2450 3630147-4810 3630147-4850
Lt. Beige 3630149-2410 3630149-2450 3630149-4810 3630149-4850
Vivid Rose 3630-78-2410 3630-78-2450 3630-78-4810 3630-78-4850 Vivid Green 3630156-2410 3630156-2450 3630156-4810 3630156-4850
Regal Red 3630-83-2410 3630-83-2450 3630-83-4810 3630-83-4850
Tangerine 3630-84-2410 3630-84-2450 3630-84-4810 3630-84-4850 Sultan Blue 3630157-2410 3630157-2450 3630157-4810 3630157-4850
Bright Blue 3630167-2410 3630167-2450 3630167-4810 3630167-4850
Royal Blue 3630-87-2410 3630-87-2450 3630-87-4810 3630-87-4850 Turquoise 3630236-2410 3630236-2450 3630236-4810 3630236-4850
Bristol Blue 3630-97-2410 3630-97-2450 3630-97-4810 3630-97-4850
Teal Green 3630246-2410 3630246-2450 3630246-4810 3630246-4850
Evening Blue 3630317-2410 3630317-2450 3630317-4810 3630317-4850
Process Blue 3630337-2410 3630337-2450 3630337-4810 3630337-4850
NOTE: (1)
3 years expected life.
SERIES 7725
3M SCOTCHCAL ELECTROCUT FILM
These are durable, stable, glossy (except matte) vinyl films for the production of electronically cut graphics. Recommended for flat and simple curved surfaces. Colorless
adhesive is suitable for application to glass surfaces. Expected outdoor performance is five years.
Series 7725 SE Dusted and Frosted Crystal films are designed for window graphics and internally illuminated displays. Films have uniformed color in both reflected and
transmitted light with low gloss to eliminate glare. These films are intended for use on flat clear substrates such as glass, acrylic or polycarbonates. Dusted Crystal has an
acid-etched look where Frosted colors have a sand-blasted appearence. Application of Dusted Crystal between two sheets of glass is not recommended. Screen printing
is not recommended nor warranted. Expected outdoor performance is three years.
Non-Perforated Rolls Non-Perforated Rolls
Color 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd Color 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
White 7725-10-2410 7725-10-2450 7725-10-4810 7725-10-4850 Robin Egg Blue 7725-86-2410 7725-86-2450 7725-86-4810 7725-86-4850
Pearl Grey 7725-11-2410 7725-11-2450 7725-11-4810 7725-11-4850 Violet 7725-88-2410 7725-88-2450 7725-88-4810 7725-88-4850
Black 7725-12-2410 7725-12-2450 7725-12-4810 7725-12-4850 Sandstone 7725-89-2410 7725-89-2450 7725-89-4810 7725-89-4850
Tomato Red 7725-13-2410 7725-13-2450 7725-13-4810 7725-13-4850 Antique White 7725-90-2410 7725-90-2450 7725-90-4810 7725-90-4850
Bright Orange 7725-14-2410 7725-14-2450 7725-14-4810 7725-14-4850 Teal 7725-96-2410 7725-96-2450 7725-96-4810 7725-96-4850
Bright Yellow 7725-15-2410 7725-15-2450 7725-15-4810 7725-15-4850 Dark Violet 7725-98-2410 7725-98-2450 7725-98-4810 7725-98-4850
Vivid Blue 7725-17-2410 7725-17-2450 7725-17-4810 7725-17-4850 Fawn 7725-99-2410 7725-99-2450 7725-99-4810 7725-99-4850
DeepMahog.Brn. 7725-19-2410 7725-19-2450 7725-19-4810 7725-19-4850 Magenta 7725103-2410 7725103-2450 7725103-4810 7725103-4850
Matte White 7725-20-2410 7725-20-2450 7725-20-4810 7725-20-4850 Harvest Gold 7725105-2410 7725105-2450 7725105-4810 7725105-4850
Matte Black 7725-22-2410 7725-22-2450 7725-22-4810 7725-22-4850 Transparent 7725114-2410 7725114-2450 7725114-4810 7725114-4850
Terra Cotta 7725-24-2410 7725-24-2450 7725-24-4810 7725-24-4850 Satin Aluminum 7725120-2410 7725120-2450 7725120-4810 7725120-4850
Sunflower 7725-25-2410 7725-25-2450 7725-25-4810 7725-25-4850 Egg Shell 7725130-2410 7725130-2450 7725130-4810 7725130-4850
Indigo 7725-27-2410 7725-27-2450 7725-27-4810 7725-27-4850 Satin Gold 7725131-2410 7725131-2450 7725131-4810 7725131-4850
Russet Brown 7725-29-2410 7725-29-2450 7725-29-4810 7725-29-4850 Saddle Brown 7725139-2410 7725139-2450 7725139-4810 7725139-4850
Medium Grey 7725-31-2410 7725-31-2450 7725-31-4810 7725-31-4850 Salmon Pink 7725173-2410 7725173-2450 7725173-4810 7725173-4850
Graphics
Sapphire Blue 7725-37-2410 7725-37-2450 7725-37-4810 7725-37-4850 Aqua 7725176-2410 7725176-2450 7725176-4810 7725176-4850
Royal Purple 7725-38-2410 7725-38-2450 7725-38-4810 7725-38-4850 Shadow Blue 7725177-2410 7725177-2450 7725177-4810 7725177-4850
Tan 7725-39-2410 7725-39-2450 7725-39-4810 7725-39-4850 Bright Green 7725186-2410 7725186-2450 7725186-4810 7725186-4850
Dark Grey 7725-41-2410 7725-41-2450 7725-41-4810 7725-41-4850 WedgewoodBlue 7725187-2410 7725187-2450 7725187-4810 7725187-4850
Kelly Green 7725-46-2410 7725-46-2450 7725-46-4810 7725-46-4850 Mauve 7725193-2410 7725193-2450 7725193-4810 7725193-4850
Intense Blue 7725-47-2410 7725-47-2450 7725-47-4810 7725-47-4850 Apple Green 7725196-2410 7725196-2450 7725196-4810 7725196-4850
Purple 7725-48-2410 7725-48-2450 7725-48-4810 7725-48-4850 Light Navy 7725197-2410 7725197-2450 7725197-4810 7725197-4850
Beige 7725-49-2410 7725-49-2450 7725-49-4810 7725-49-4850 Perf. Match Red 7725263-2410 7725263-2450 7725263-4810 7725263-4850
Cardinal Red 7725-53-2410 7725-53-2450 7725-53-4810 7725-53-4850 Proc. Magenta7725273-2410 7725273-2450 7725273-4810 7725273-4850
Light Orange 7725-54-2410 7725-54-2450 7725-54-4810 7725-54-4850 Bottle Green 7725276-2410 7725276-2450 7725276-4810 7725276-4850
Dark Green 7725-56-2410 7725-56-2450 7725-56-4810 7725-56-4850 Dark Aqua 7725307-2410 7725307-2450 7725307-4810 7725307-4850
Olympic Blue 7725-57-2410 7725-57-2450 7725-57-4810 7725-57-4850 Bermuda Blue 7725357-2410 7725357-2450 7725357-4810 7725357-4850
Burgundy 7725-58-2410 7725-58-2450 7725-58-4810 7725-58-4850
Putty 7725-59-2410 7725-59-2450 7725-59-4810 7725-59-4850 SERIES 7725 SE
Geranium 7725-63-2410 7725-63-2450 7725-63-4810 7725-63-4850
Non-Perforated Rolls
Apricot 7725-64-2410 7725-64-2450 7725-64-4810 7725-64-4850 Color 24" x 10 yd 24" x 50 yd 48" x 10 yd 48" x 50 yd
Forest Green 7725-66-2410 7725-66-2450 7725-66-4810 7725-66-4850 Dusted Crystal 7725314-2410 7725314-2450 7725314-4810 7725314-4850
Peacock Blue 7725-77-2410 7725-77-2450 7725-77-4810 7725-77-4850
Frosted Rose 7725323-2410 7725323-2450 7725323-4810 7725323-4850
Vista Yellow 7725-85-2410 7725-85-2450 7725-85-4810 7725-85-4850 Frosted Clear 7725324-2410 7725324-2450 7725324-4810 7725324-4850
Frosted Mint 7725326-2410 7725326-2450 7725326-4810 7725326-4850
Frosted Blue Mist 7725327-2410 7725327-2450 7725327-4810 7725327-4850
Frosted Gold 7725331-2410 7725331-2450 7725331-4810 7725331-4850
SERIES 180
3M SCOTCHCAL CONTROLTAC PLUS FILM
Controltac Plus series films are durable and dimensionally stable glossy vinyl films which may be screen printed on for attractive multicolored signs, labels, markings,
striping and emblems for commercial and industrial use which must withstand severe weather and handling. Intended for use on flat surfaces with or without rivets
and corrugated surfaces. Not intended where markings may be subjected to petrochemical spillage. These films have excellent hiding power.
3M developed a technology which allows positioning and repositioning of Controltac Plus film. It is a mechanical rather than an adhesive feature that is activated
when pressure is applied to the film surface by a squeegee. Performance of five to seven years can be expected. Other widths also available.
Non-Perforated Rolls Non-Perforated Rolls
Color 24" x 10 yd 24" x 50 yd 36" x 50 yd 48" x 10 yd 48" x 50 yd Color 24" x 10 yd 48" x 10 yd 48" x 50 yd
White 180-10-2410 180-10-2450 180-10-3650 180-10-4810 180-10-4850 Violet 180-88-2410 180-88-4810 180-88-4850
Black 180-12-2410 180-12-2450 180-12-3650 180-12-4810 180-12-4850 Teal 180-96-2410 180-96-4810 180-96-4850
Tomato Red 180-13-2410 180-13-2450 180-13-3650 180-13-4810 180-13-4850 Dark Violet 180-98-2410 180-98-4810 180-98-4850
Bright Orange 180-14-2410 180-14-2450 180-14-3650 180-14-4810 180-14-4850 Magenta 180-103-2410 180-103-4810 180-103-4850
Bright Yellow (1) 180-15-2410 180-15-2450 180-15-3650 180-15-4810 180-15-4850 Transparent 180-114-2410 180-114-4810 180-114-4850
Vivid Blue 180-17-2410 180-17-2450 180-17-3650 180-17-4810 180-17-4850 Satin Aluminum 180-120-2410 180-120-4810 180-120-4850
DeepMahog.Brn. 180-19-2410 180-19-2450 180-19-3650 180-19-4810 180-19-4850 Satin Gold 180-131-2410 180-131-4810 180-131-4850
Matte Black 180-22-2410 180-22-2450 180-22-3650 180-22-4810 180-22-4850 Salmon Pink 180-173-2410 180-173-4810 180-173-4850
Deep Red 180-23-2410 180-23-2450 180-23-3650 180-23-4810 180-23-4850 Aqua 180-176-2410 180-176-4810 180-176-4850
Sunflower (1) 180-25-2410 180-25-2450 180-25-3650 180-25-4810 180-25-4850 Bright Green 180-186-2410 180-186-4810 180-186-4850
Indigo 180-27-2410 180-27-2450 180-27-3650 180-27-4810 180-27-4850 Mauve 180-193-2410 180-193-4810 180-193-4850
Russet Brown 180-29-2410 180-29-2450 180-29-3650 180-29-4810 180-29-4850 Apple Green 180-196-2410 180-196-4810 180-196-4850
Medium Grey 180-31-2410 180-31-2450 180-31-3650 180-31-4810 180-31-4850 Slate Mtl. 180-201-2410 180-201-4810 180-201-4850
Sapphire Blue 180-37-2410 180-37-2450 180-37-3650 180-37-4810 180-37-4850 Red Mtl. 180-203-2410 180-203-4810 180-203-4850
Royal Purple 180-38-2410 180-38-2450 180-38-3650 180-38-4810 180-38-4850 Charcoal Mtl. 180-211-2410 180-211-4810 180-211-4850
Tan 180-39-2410 180-39-2450 180-39-3650 180-39-4810 180-39-4850 Sage Green Mtl. 180-216-2410 180-216-4810 180-216-4850
Dark Grey 180-41-2410 180-41-2450 180-41-3650 180-41-4810 180-41-4850 Dark Blue Mtl. 180-217-2410 180-217-4810 180-217-4850
Graphics
Kelly Green 180-46-2410 180-46-2450 180-46-3650 180-46-4810 180-46-4850 Lt. Silver Mtl. 180-220-2410 180-220-4810 180-220-4850
Intense Blue 180-47-2410 180-47-2450 180-47-3650 180-47-4810 180-47-4850 Grey Mtl. 180-221-2410 180-221-4810 180-221-4850
Beige 180-49-2410 180-49-2450 180-49-3650 180-49-4810 180-49-4850 Brt. Blue Mtl. 180-227-2410 180-227-4810 180-227-4850
Cardinal Red 180-53-2410 180-53-2450 180-53-3650 180-53-4810 180-53-4850 Dk. Burg. Mtl. 180-228-2410 180-228-4810 180-228-4850
Light Orange 180-54-2410 180-54-2450 180-54-3650 180-54-4810 180-54-4850 Copper Mtl. 180-229-2410 180-229-4810 180-229-4850
Dark Green 180-56-2410 180-56-2450 180-56-3650 180-56-4810 180-56-4850 Silver Blue Mtl. 180-237-2410 180-237-4810 180-237-4850
Olympic Blue 180-57-2410 180-57-2450 180-57-3650 180-57-4810 180-57-4850 Choc. Brn. Mtl. 180-239-2410 180-239-4810 180-239-4850
Burgundy 180-58-2410 180-58-2450 180-58-3650 180-58-4810 180-58-4850 Gold Mtl. 180-241-2410 180-241-4810 180-241-4850
Geranium 180-63-2410 180-63-2450 180-63-3650 180-63-4810 180-63-4850 Dark Aqua 180-307-2410 180-307-4810 180-307-4850
Peacock Blue 180-77-2410 180-77-2450 180-77-3650 180-77-4810 180-77-4850
NOTE: (1)
Significantly less opacity than others.
SERIES 160
3M SCOTCHCAL CONTROLTAC PLUS FILM
160-30/32 film is tough, permanent and scuff resistant which will withstand Non-Perforated Rolls
severe weather and handling. Because a black pigmented adhesive is used, this Color 24" x 50 yd 48" x 50 yd
film has excellent hiding power. Adhesive allows for removal with heat for up to White 160-30-2450 160-30-4850
five years with little or no residue from most surfaces. Performance of five years Black 160-32-2450 160-32-4850
can be expected. Translucent Frost 160-60-2450 160-60-4850
160-80 film is white, tough, ink and enamel receptive and permanent scuff resistant. White Enamel Receptive 160-80-2450 160-80-4850
It may be screened, letterpress printed on or hand brushed.
Performance of four years can be expected.
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
Las Vegas: 702.795.2233 / 800.772.4141 / Fax 702.798.9911 • Benicia: 707.747.5115 / 800.824.0099 / Fax 707.747.1266
E-30
3M SCOTCHCAL FILM
SERIES 3635 LIGHT CONTROL FILM SERIES 3640 & 3642 OVERLAY FILM
Series 3635-10/12 films are designed for blocking out light when applied to internally Series 3640 and 3642 films are durable, dimensionally stable translucent films
illuminated signs. These opaque films are intended for application on flat acrylic and which are designed for the protection of graphics used on internally illuminated
polycarbonate. 3635-10 is white on the face side and black on the adhesive side. or window graphics applications. These films are intended for application to 3M
3635-12 is black on the face side and white on the adhesive side. Scotchcal films which are applied to flat acrylic, butyrate, fiberglass, glass and
Series 3635-30/70 films are designed for use as light diffusers when applied Panaflex series 945 substrates.
to the second surface of internally illuminated signs. 3635-30 has 30% light Series 3640 has a high gloss surface while series 3642 has a matte surface. When
transmission while 3635-70 has 60% light transmission. These films are uniformly properly applied to the substrates listed above, these products impart outstanding
white in both reflective and transmitted light and are intended for application on resistance to dirt and other environmental factors including many strong solvents.
flat acrylic and polycarbonate. Not intended nor warranted for application to the Expected outdoor performance is 9 years on vertical applications (6 years in very hot
first (front) surface of sign faces. areas) and 5 years on non-vertical applications (4 years in very hot areas).
Series 3635-91 Day/Night film is an exterior, medium term durability film with Non-Perforated Rolls
a nominal light transmission of 47% used to produce the appearance of dark Color 48" x 10 yd 48" x 50 yd
graphics in daylight while producing white or colored graphics at night on internally
illuminated signs. Can be applied to a flat first or second rivet free surface. Can High Gloss 3640114-4810 3640114-4850
also be applied to most sign related substrates. See 3M literature for detailed Matte 3642114-4810 3642114-4850
recommendations.
Non-Perforated Rolls
Color 48" x 10 yd 48" x 50 yd
White Blockout 3635-10-4810 3635-10-4850
Graphics
SERIES 3650
3M SCOTCHCAL GRAPHIC MARKING FILM
Durable, dimensionally stable glossy vinyl films intended for the production of attractive signs, labels, markings, striping and emblems for commercial and industrial
applications which must withstand severe handling and weather conditions as well as occasional spills of petroleum products. These films are intended for use on flat
surfaces with and without rivets. Applications to corrugated surfaces is not recommended.
3M has developed a technology which allows Scotchcal Plus series 3650 to be both positionable and repositionable. This technology is a mechanical feature rather than
an adhesive property. It allows for pressure activated adhesion when pressure is applied to the film surface by a squeegee. Seven year warranty.
Non-Perforated Rolls
Color 24" x 10 yd 24" x 50 yd 36" x 50 yd 48" x 10 yd 48" x 50 yd
White 3650-10-2410 3650-10-2450 3650-10-3650 3650-10-4810 3650-10-4850
Black 3650-12-2410 3650-12-2450 3650-12-3650 3650-12-4810 3650-12-4850
Transparent 3650114-2410 3650114-2450 3650114-3650 3650114-4810 3650114-4850
3M SCOTCHLITE
REFLECTIVE FILM
SERIES 580 SCOTCHLITE REFLECTIVE FILM
A durable, flexible, enclosed lens reflective sheeting for the production of multicolored markings, displays, signs, truck markings and other markings which have the
same appearance in the daytime and at night even when viewed at wide angles. Intended for application to flat surfaces with and without rivets. Not intended for
corrugated surfaces or compound curvatures. Expected performance of five to seven years.
Non-Perforated Rolls
Color 24" x 10 yd 24" x 50 yd 36" x 50 yd 48" x 10 yd 48" x 50 yd
Graphics
White 580-10U-2410 580-10U-2450 580-10U-3650 580-10U-4810 580-10U-4850
Orange 580-14-2410 580-14-2450 580-14-3650 580-14-4810 580-14-4850
Gold 580-64-2410 580-64-2450 580-64-3650 580-64-4810 580-64-4850
Yellow 580-71-2410 580-71-2450 580-71-3650 580-71-4810 580-71-4850
Red 580-72-2410 580-72-2450 580-72-3650 580-72-4810 580-72-4850
Blue 580-75-2410 580-75-2450 580-75-3650 580-75-4810 580-75-4850
Light Blue 580-76-2410 580-76-2450 580-76-3650 580-76-4810 580-76-4850
Green 580-77-2410 580-77-2450 580-77-3650 580-77-4810 580-77-4850
Lemon Yellow 580-81-2410 580-81-2450 580-81-3650 580-81-4810 580-81-4850
Ruby Red 580-82-2410 580-82-2450 580-82-3650 580-82-4810 580-82-4850
Charcoal Black 580-85-2410 580-85-2450 580-85-3650 580-85-4810 580-85-4850
MMM-PA-1BLUE MMM-SA-1
MMM-RBA-1
COBURN/R TAPE
SPECIAL EFFECT PVC FILMS
Coburn Graphic Films designs and manufactures unique metallized plastic films in a wide variety of eye-catching holographic, diffraction, phosphorescent, mirrored,
glitter, prism and other illusionary patterns. For over 30 years, Coburn special effect films have created distinctive signage, decals, packaging, labels, exhibits, toys and
novelties.
This 3mil metallized PVC film has a .9mil general purpose clear permanent adhesive on a heavyweight lay flat liner. Indoor durability is long term for most applications.
Outdoor durability is limited typically to six to twelve months, depending on application. Exceptionally harsh UV and wet conditions can shorten exterior life. Exterior life
can be extended by using a UV protective clear coating and edge sealer. Long-Term exterior versions may also be available.
The following are several popular descriptions of the types of product:
MULTI LENS: Metallized PVC films with continual repeat patterns of “three-dimensional” concave or convex lenses. Based on the Fresnel Lens principal, the effect is that
of metallic spheres. Available in different lens sizes and colors.
DIFFRACTO-LITE: Metallized holographic and prismatic PVC films. Available in a broad range of light-diffracting patterns.
SIGNGOLD SIGNGOLD
SignGold® is an ultrathin, 1mil, 22 karat gold leaf film with a permanent self-adhesive for computer-aided sign
making. SignGold® signage costs approximately 50% less than labor intensive "hand-guilded" gold leaf and
eliminates costly re-gilding every few years. SignGold® may be used outdoors on glass, metal, painted wood,
plastic and other commonly used sign making substrates. SignGold® cuts, weeds and applies easier. It also
conforms to irregular surfaces and won't curl, crack, fade or peel. Performance of 10 years can be expected.
Also available in other widths and patterns.
Catalog Width Roll Length Application Perforated or
Number Description/Pattern Inches Yards Surface Un-Perforated
Burnished Glass Gold Florentine Swirl Gold
SIG-BRNISH22 Burnished Glass Gold 15" 2 2nd Perforated
SIG-BRNISH25 Burnished Glass Gold 15" 5 2nd Perforated
SIG-BRNISH30 Burnished Glass Gold 15" 10 2nd Perforated
SIG-SG1FS-02 Florentine Swirl Gold 15" 2 1st Perforated
SIG-SG1FS-05 Florentine Swirl Gold 15" 5 1st Perforated
SIG-SG1FS-10 Florentine Swirl Gold 15" 10 1st Perforated
SIG-SG1LET-02 Large Engine Turned Gold 15" 2 1st Perforated
SIG-SG1LET-05 Large Engine Turned Gold 15" 5 1st Perforated Large Engine Turned Gold Small Engine Turned Gold
SIG-SG1LET-45 Large Engine Turned Gold 24" 5 1st Un-Perforated
SIG-SG1SET-02 Small Engine Turned Gold 15" 2 1st Perforated
SIG-SG1SET-05 Small Engine Turned Gold 15" 5 1st Perforated
SIG-SG1SS-02 Satin Gold 15" 2 1st Perforated
Graphics
SIG-SG1SS-05 Satin Gold 15" 5 1st Perforated
SIG-SURFCE22 Surface Matte Gold 15" 2 2nd Perforated
SIG-SURFCE25 Surface Matte Gold 15" 5 1st Perforated
Satin Gold Surface Matte Gold
SIG-SNGDI550 Release Liner for SignGold 15" 50 - Perforated
exceptionally easy to snap and tear. Handles like 4075RLA-4.25 White Paper 4.25 AT60-30 Clear 30.0
paper. Does not wrinkle or stretch. Its matte, non- 4075RLA-5.25 White Paper 5.25 AT60-36 Clear 36.0
4075RLA-6.5 White Paper 6.5 AT60-48 Clear 48.0
glare surface enables perfect registration. Controlled 4075RLA-8.5 White Paper 8.5
adhesion sticks only when pressure is applied, with no 4075RLA-10.5 White Paper 10.5
build up of tack level. Sold by the 100 yard roll. 4075RLA-12 White Paper 12.0
4075RLA-14 White Paper 14.0
Catalog Width
Number Description (Inches) 4075RLA-15 White Paper 15.0
4075RLA-16 White Paper 16.0
AT42RLA-1.25 Matte Clear 1.25 4075RLA-18 White Paper 18.0
PREMIUM TAPES AND FILMS
AT42RLA-2.25 Matte Clear 2.25 4075RLA-20 White Paper 20.0 Many other high performance tapes and films also
AT42RLA-3.25 Matte Clear 3.25 4075RLA-24 White Paper 24.0 available.
AT42RLA-4.25 Matte Clear 4.25 4075RLA-30 White Paper 30.0
AT42RLA-5.25 Matte Clear 5.25 4075RLA-36 White Paper 36.0
AT42RLA-6.5 Matte Clear 6.5 4075RLA-48 White Paper 48.0
AT42RLA-8.5 Matte Clear 8.5 4075RLA-60 White Paper 60.0
AT42RLA-10.5 Matte Clear 10.5
AT42RLA-12 Matte Clear 12.0
AT42RLA-14 Matte Clear 14.0
AT42RLA-15 Matte Clear 15.0
AT42RLA-16 Matte Clear 16.0
AT42RLA-18 Matte Clear 18.0
AT42RLA-20 Matte Clear 20.0
AT42RLA-24 Matte Clear 24.0
AT42RLA-30 Matte Clear 30.0
AT42RLA-36 Matte Clear 36.0
AT42RLA-48 Matte Clear 48.0
Graphics
Dusted Crystal and SCPM - 3 SCPS - 2
592U-48 48.0 Fluorescent Frosted Crystal SCPS - 2 SCPS - 53X
AzonColor® Inkjet Media is designed for use in inkjet printers. Available in a wide variety of widths and types. AzonColor® Media is suitable for use in display graphics,
signs, trade show graphics, banners, murals, point-of-purchase and backlit signage. Other uses include posters, framed art, overlays and wall hangings. The following
pages represent many of the Azon products most commonly used and stocked. Most products are an ideal match with most printers. Some product series numbers
are followed by an "HP" or "N" suffix. In most cases an "HP" suffix notes the product is an ideal match for Hewlett Packard printers and a few others. In most cases,
an "N" suffix notes the product is an ideal match for Encad printers and a few others. Items that do not have a suffix after the series number are an ideal match or
are recommended for CAD line-work and/or light ink coverage for most all printers. Consult the Azon compatibility chart in the Azon catalog prior to use. Other widths
and types also available.
Graphics
quality of this specially formulated wet strength base paper provides for a broad Because both sides are printable, this premium coated paper is perfect for proofing
range of applications and uses. Perfect for faux fine art. applications. Its coating provides brilliant, crisp images and the heavy weight of
the product eliminates show-through. Even when two-sided printing is not the
Catalog Length requirement, this double-coated paper will provide a durable output capable of
Number Description Width (Feet) handling volume ink saturation.
AZ-736-3660 Power Paper Faux Artist Canvas 36" 60
AZ-736-5060 Power Paper Faux Artist Canvas 50" 60
AZ-736-5460 Power Paper Faux Artist Canvas 54" 60 CLEAR FILM • 787N
A 4mil clear film with an opaque, white paper interleaved to ensure printer
recognition. Designed for all types of multi-layered imaging, signage and overlays.
Interleaf also reduces registration problems and slippage.
reduction. With this film, graphics can be printed in reverse, then turned over for
mounting without overlamination. Applications for such a versatile and durable product
are endless. Recommended for use with dye-based inks only.
Catalog Length
Number Description Width (Feet)
AZ-766HP3660 Display Graphics Film 36" 60
AZ-766HP5460 Display Graphics Film 54" 60
AZ-766N3660 Display Graphics Film 36" 60
AZ-766N5060 Display Graphics Film 50" 60
Graphics
REINFORCED POSTER PAPER • 830
Combining wet strength paper with nylon reinforcement, this paper becomes a very
durable outdoor poster material. An economical alternative to high-end banner
materials, especially for short-term indoor or outdoor use.
Catalog Length
Number Description Width (Feet)
AZ-830-3675 Reinforced Poster Paper 36" 75
AZ-830-5475 Reinforced Poster Paper 50" 75
HP DESIGNJET PAPERS
Works with HP DesignJet CP Ink systems and HP DesignJet 2500CP/2000CP printers as a total printing solution for clear, sharp results. Excellent image quality on
a wide variety of new HP DesignJet papers and film. HP coated paper for exceptional quality everyday prints. HP heavyweight coated papers for final presentations
and displays. HP High-Gloss photo paper for high impact, photo-realistic images and graphics. HP semi-gloss paper for vivid, photo-realistic images and graphics. HP
high-gloss white film for brilliant color, ultra-high gloss, extra fade-resistant images and graphics. All other Hewlett Packard imaging materials also available.
Catalog Roll Roll
Number Description Width Length
HEW-C6019A Coated Paper 24" 150'
HEW-C6020A Coated Paper 36" 150'
HEW-C6560B Coated Paper 54" 150'
HEW-C6021A Heavyweight Coated Paper 24" 100'
HEW-C6030C Heavyweight Coated Paper 36" 100'
HEW-C6652B Heavyweight Coated Paper 54" 100'
HEW-C6023A Semi-Gloss Photo Paper 24" 100'
HEW-C6024A Semi-Gloss Photo Paper 36" 100'
HEW-C6564A Semi-Gloss Photo Paper 54" 100'
HEW-C6025A High-Gloss Photo Paper 24" 100'
HEW-C6026A High-Gloss Photo Paper 36" 100'
HEW-C6566A High-Gloss Photo Paper 54" 100'
HEW-C1861A Bright White 24lb. 36" 150'
HEW-C3885A High-Gloss White 36" 70'
Graphics
Hewlett Packard has a full range of large format printers. Available in 36" or 54" widths, the HP 54" DesignJet 3000CP and 3500CP printers combine low operating
cost, hassle-free use and outstanding image quality. A menu-driven control panel reduces training time and operator error. Built-in temperature and humidity sensors
automatically adjust drying time so there is no need for constant supervision. Ink delivery system detects and bypasses clogged nozzles to ensure consistently reliable
operation. HP DesignJet 2000CP (8 MB RAM) and 3000CP (12 MB RAM) printers require an external RIP or the supplied Microsoft Windows or AutoCAD drivers.
HP DesignJet 2500CP (20 MB RAM) and 3500CP (36 MB RAM) come with built-in Adobe PostScript 3 RIP and ethernet connectivity. The HP 3000CP and 3500CP
printers come standard with a take-up reel.
Produce photo-quality images with brilliant, accurate colors and smooth, subtle skin tones. HP DesignJet printers, ink systems and media are designed together
for optimum image quality. Supports two ink sets; dye-based inks for photo-quality images and pigment-based UV inks for enhanced light-fastness with 3M MCS
warranty. Auto-replenishment ink delivery system makes ink replacement clean and easy. Prints up to 400, 2' x 3' prints per dye-based ink system. Accepts a
wide range of media including coated papers, glossy photo papers, vinyl and more. One year warranty with free on-site service and preventative maintenance if
needed for high-volume users. Includes custom drivers for AutoCAD and Windows.
Many other Hewlett Packard printers and accesories also available.
Graphics
urethane foamboard. Trimmed edges allow smooth, accurate tracking through computerized signmaking
machines. A strong, clear film liner provides extra rigidity.
Style 125: A high-tack stencil designed for sandblasting on raw wood and urethane foamboard. Has
easy-release orange liner. The strength of the adhesive eliminates the need for filler or spray adhesives.
CAUTION: This stencil has a very aggressive adhesive and is not recommended for use on some woods
without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces.
Style 157: Same construction as medium-tack #117 compuer stencil, except that the hole pattern is for
use on standard 1/2" center sprocket system machines. NOTE: style #157 will not work on large pin
30" plotters; style #117 is recommended for this use.
Catalog Roll Perforated or
Number Width Length Tack Non-Perforated
ANC-111-2510 25" 10 Yards Low Non-Perforated
ANC-116-1510 15" 10 Yards High Non-Perforated
ANC-116-3010 30" 10 Yards High Non-Perforated
ANC-117-1510 15" 10 Yards Medium Non-Perforated
ANC-117-3010 30" 10 Yards Medium Non-Perforated
ANC-125-2510 25" 10 Yards High Non-Perforated
ANC-157-3010 30" 10 Yards Medium 1/2" Perforated
Graphics
GRA-KF552RD Red Fiber Tip Pen, Disposable Water-Based 1/5
GRA-KF562BK Black Fiber Tip Pen, Disposable Solvent-Based 1/5
GRA-KB542BK Black Roller-Ball Pen, 3mm Wide, Water Based Ink 1/5
GRA58000017T Stand for 30" GRAFC5100-75 Plotter 1
GRA58000018T Media catch basket for 30" GRAFC5100-75 Plotter 1
GRA58000019T Media catch basket for 42" GRAFC5100-100 Plotter 1
GRA58000020T Media catch basket for 54" GRAFC5100-130 Plotter 1
Catalog
Number Description
GRA-CE200060 Max. Cutting Area 23.0" x 164', Cutting Speed 24ips
GRACE2000120 Max. Cutting Area 48" x 164', Cutting Speed 40ips
GRA-CE2K60FS Floor Stand for 24" CE2000-60 Plotter
GRA-JX2ST-4 UV Ink CMYK Set & 1 Roll of 36" x 40' Water Resistant Matte Vinyl
GRA-JX2ST-5 Dye Ink CMYK Set & 1 Roll of 42" x 100' Premium Photo Gloss Paper
GRA-JX2ST-6 Dye Ink CMYK Set & 1 Roll of 42" x 100' Premium Photo Satin Paper
FLEXI 7 SOFTWARE
The Flexi Family 7 consists of five products which cater to specific user levels and production goals. Scanvec Amiable offers benefits such as increasing user productivity,
providing for quicker upgrades and language conversions and producing an easy-to-use, intuitive interface that will be comfortable for new and existing Flexi 7 users. All
products in the Flexi Family 7 are available for Windows 95/98, Windows NT/2000/XP and Macintosh. Highlights of each software products are as follows:
FLEXISIGN-PRO • SCA-FLEX-PRO
FlexiSign-Pro is designed and engineered to be the total solution for any signmaking business. It features OLE, advanced bitmap filters and editing, RIPing tools, all
special effects along with full vinyl cutting and color printing features including Adobe PostScript 3, ICC color profile support, Pantone® and vinyl color libraries. Includes
direct drivers for popular inkjet, thermal transfer and print/cut devices, and vinyl cutters.
FLEXIEXPERT • SCA-FLXPRT
FlexiExpert is packaged for the professional signmaker who requires advanced vinyl cutting and bitmap editing tools, but does not need all the advanced color printing
features. FlexiExpert features full design, scanning, and tracing functions, along with special effects, vinyl cutting and basic large-format color printing features. Also
includes Job Estimator for accurate project management, design templates for faster production, direct drivers for popular inkjet, thermal color transfer and print/cut
devices as well as drivers for vinyl cutters.
FLEXISIGN • SCA-FLXSIGN
FlexiSign, the signmaking software of choice offers all of the necessities for any sign business. Included in this complete design and cutting program are such features
as import/export files, scanning and grayscale tracing, full text manipulation, vinyl libraries, multiple un-dos and re-dos, drag and drop color and stroke support. It also
includes direct drivers for the industry's popular cutters and plotters.
FLEXILETTER • SCA-FLXLETTR
Graphics
FlexiLetter is an entry-level design and cutting software that features import/export of files, full text manipulation, and direct drivers for the industry's most popular
vinyl cutters.
FLEXIDESIGNER • SCA-FLXDSGNR
FlexiDesigner is a pure software desigin program that is used in a second design-only or sales station in which layouts can be shown to customers without tying up the
production line. It has all of the advanced design, layout and image editing features of FlexiSign-Pro to prepare files for output on another FlexiSign-Pro station.
PHOTOPRINT 3
Graphics
Scanvec Amiable PhotoPrint 3 is a family of professional digital printing and RIP software that offers versatility, productivity and quality output to meet diverse industry
requirements. PhotoPrint 3 includes all of the latest technologies such as certified Adobe PostScript 3, ICC technology and direct drivers for all major output devices.
PHOTOPRINT SE • SCA-PP-SE
PhotoPrint SE is an entry-level single printer and single workstation RIP package for the Mac and PC platform. PhotoPrint SE works seamlessly through popular design
software such as Adobe Photshop, Illustrator, QuarkXepress, CorelDraw and all major CAD/AEC/GIS engineering solutions.
PHOTOPRINT DX • SCA-PP-DX
PhotoPrint DX includes all of the features of PhotoPRINT SE plus image editing and layout tools and the ability to produce output for contour cutting on a vinyl cutter.
Workflow and RIP software from Onyx takes the mystery out of color printing making it possible for graphics professionals to produce large format output from popular
inkjet printers quickly and accurately the first time, every time.
ONYX RIPCENTER • OCE-ONYX-RC
Onyx RIPCenter is an economical, stand alone entry level software package that features
ease of use and the ability to achieve professional color "out of the box". RIPCenter
includes a PostScript RIP, Raster RIP, automatic tiling, job thumbnail and print nesting
previews and support for one active printer with multiple "hot folders".
Graphics
sending output to multiple printers. Step & Repeater adds the ability to do
seamless pattern tiling
ProductionHouse includes two PostScript RIPs, one raster RIP and support for four
active printers with multiple "hot folders". Also included are media management,
calibration, pre-flight preview, custom tiling and color correction, and Step &
Repeater.
ONYX UPGRADES
Software upgrades from one level to another and from older versions are also
available. Call for more information.
COMPUTER SYSTEMS
For Computer Aided Sign Making
A computer system can be configured for computerized sign making environments ranging from the smallest of shops to the most demanding design and production
operations. We can also custom configure a system from our large selection of processors, memory, drives and monitors. Additionally we offer a number of system
accessories such as scanners, modems, tape drives, sound cards, networking hardware and production hardware.
Graphics
Graphics
accelerations up to 3g's. Utilizes a swivel knife for optimal cutting of all Gerber tangential-steered blade or a swivel knife for optimal cutting of all Gerber material
materials and many others. Includes a knife tool holder and 45 degree blade, two and many others. Includes an accessory kit, knife blade holder and blade, pen,
additional 45° blades and 4 rollerball pens. pounce wheel and material roll holder.
P66141A P55225A
PLOTTER ACCESSORIES
GS15Plus, HS15Plus, GS750Plus, HS750Plus, GS15, HS15, S750, SIGNMAKER/750, GRAPHIX/750
GS750, HS750, SPRINT IIB & SUPERSPRINT PLOTTERS & GSP SPRINT/750
Ball Point Pen, Black P32433A Job Card, 100/Package P38074B Pen Holder w/Black Med. Pen P67588A Hex Allen Wrench, .062" P25934A
Ball Point Pen, Blue P32432A Knife Holder w/30° P56734A Pen Holder w/o Pen P19283B Job Card, 100/Package P38074B
Ball Point Pen, Red P32431A SuperSharp Blade Ball Point Pen, Fine, Black P26177A Knife Holder w/30° P26660B
Pen Holder w/Black Pen P66925A Knife Holder w/30° P26660B Ball Point Pen, Med., Black P25927A SuperSharp Blade
Pen Holder w/o Pen P32434B SuperSharp Blade, Guarded Ball Point Pen, Fine, Blue P26180A Pen Height Adjustment Tool P28842B
Carbide Knife Blade, 30° P17156B Material Roll Holder, 15" P26381D Ball Point Pen, Fine, Red P26178A Pounce Wheel Holder P25032B
Carbide Knife Blade, 45° P33489B PC-to-Plotter Cable, 30 ft. P61415C Ball Point Pen, Med., Red P25926A w/Fine Pitch Wheel, 11 Teeth, 1/4" Dia.
Carbide Knife Blade, 60° P37311B PC-to-Plotter Cable, 50 ft. P61414C Carbide Knife Blade, 30° P17156B Rivet Brush Applicator P42887A
Fine Pounce Wheel, P25032B Pen Height Adjustment Tool P28842B Carbide Knife Blade, 45° P33489B Squeegee P23541C
11 Teeth 1/4" Diameter Pounce Wheel Holder P29508B Carbide Knife Blade, 60° P37311B SuperSharp Carbide P30033B
Fuse, 3-Amp, 3AG, 250V GS15 P38643B w/Fine Pitch Wheel, 11 Teeth, 1/4" Dia. Felt Tip Pen Holder P17939B Knife Blade, 30°
Fuse, 5-Amp, 3AG, 250V HS15P32356B Squeegee P23541C w/Blue Med. Ball Point Pen Theta Knife Lift Washer P27081B
GS Drag Knife Assembly P56518B SuperSharp Carbide P30033B Felt Tip Pen Holder P21730B Tool Cap P17189B
w/Shoe and Drag Knife Blade Knife Blade, 30° w/o Boldliner Pen Tool Weight #1 P17486B
GS Drag Knife Blade P44985B Tool Cap P17189B Felt Tip Boldliner Pen, Black P26174A Tool Weight #2 P17487B
Hex Allen Wrench, .062" P25934A Tool Inserts P29506B Felt Tip Boldliner Pen, Blue P26179A Tool Weight #3 P17179B
HS Swivel Knife Assembly P56530B Tweezers P25933A Felt Tip Boldliner Pen, Red P51918A Tool Weight #4 P17609B
w/Shoe and 2 Blades Film Stripping Tool P73983A Fine Pounce Wheel, P25032B Tool Weight #5 P17610B
HS Swivel Knife Blade P56928B Rivet Brush Applicator P42887A 11 Teeth 1/4" Diameter Tweezers P25933A
Fuse, 2 Amp, 3AG, 250V P26176A Film Stripping Tool P73983A
Graphics
Graphics
of the four tools for quick material change. Includes knife holder with 45° blade,
two additional 45° knife blades, two felt pens, material roller support system,
spare cutting pad and stand.
P70386A
OMEGA CS SOFTWARE
Omega CS provides a suite of complete software tools for graphics design and
production using cut-vinyl. Omega CS drives most Gerber and third-party plotters.
All the features of Omega CP are included with the exception of those used for
digital imaging. From the raster-to-vector conversion to the customizable Warp
Distortion Tool, Omega CS provides the means to explore all the creative possibilities
available with vinyl design.
P72324A (PAR) / P72638A (USB)
Additional options available separately:
• Gerber ColorID™ digital color matching software and optional handheld
scanner
• Additional specialty fonts and graphics libraries
• Upgrade to Omega CP
Graphics
GA RELEASE 4.X THROUGH 6.X TO OMEGA UPGRADE OMEGA LEVEL-TO-LEVEL UPGRADES
Includes Omega password CD-ROM and a full set of manuals. Omega level-to-level upgrades are provided to allow users with previously purchased
Omega CS or Omega CL software packages to move up to a higher level of Omega
P72463A (PAR) / P72725A (USB) software. GA users can benefit in this program because the movement from level-to-
level also includes an Omega upgrade; there is no need to order one separately.
GA RELEASE 4.0 OR EARLIER TO OMEGA UPGRADE
GA 4.0 or earlier to Omega with ROS GSP-Configured. Catalog Level-to-Level
Number Upgrades
P72457A (PAR) / P72721A (USB)
P72580A GA ELITE to OMEGA CP, Parallel Security Block GSP Configured
OMEGA MANUAL LITERATURE KIT P72735A GA ELITE to OMEGA CP, USB Security Block GSP Configured
This manual set includes all Omega CP, CS and CL level manuals (including ArtPath) and P72582A GA SELECT to OMEGA CP, Parallel Security Block GSP Configured
distortion chart. The above manual sets are not appropriate for Omega PS. P72737A GA SELECT to OMEGA CP, USB Security Block GSP Configured
P72447A
P72584A GA SELECT to OMEGA CS, Parallel Security Block GSP Configured
OMEGA UPGRADES P72739A GA SELECT to OMEGA CS, USB Security Block GSP Configured
Omega Upgrades are "Smart Upgrades". Software automatically identifies the P72588A OMEGA CL to OMEGA CP, Parallel Security Block GSP Configured
resident Gerber software package and upgrades that software with it's appropriate
level and option set to the new Omega features. Omega users with multiple P72743A OMEGA CL to OMEGA CP, USB Security Block GSP Configured
systems are strongly encouraged to upgrade all systems at the same time to allow P72590A OMEGA CL to OMEGA CS, Parallel Security Block GSP Configured
for seamless file sharing and to take advantage of network functionality. Software
upgrades must be purchased for each Graphix Advantage or Omega system being P72745A OMEGA CL to OMEGA CS, USB Security Block GSP Configured
upgraded, including MIP systems. P72586A OMEGA CS to OMEGA CP, Parallel Security Block GSP Configured
systems. Turns GSP Sprint series lettering systems into output-only devices. Includes Braille Translation Program, an Omega U.S.A. Braille font and a U.S.A.
Braille Relief font for use with GSP Routers.
P55101D P66627A
NOTE: (1)
Standard with all Omega software products except Omega PS.
Heliotype
GERBER SOFTWARE
MACIMPRINT™ EDGE & PLOTTER OPTION CUSTOM IMAGERIP ICC PROFILES
With MacImprint, Mac users can output to Gerber equipment. Automated settings Custom color correction table for a printer/ink/media combination which is not
for the Gerber Edge and plotters are available right from within Adobe® Illustrator®. currently supported by ImageRIP.
Create "Gerber Ready" graphic files that print and cut, fast and accurately.
MacImprint driver software can print CMYK images to a Gerber Edge directly
from applications such as QuarkXPress™, Macromedia Freehand™ and Adobe®
Photoshop®. Individual spot colors can be printed as well. One can also cut graphics IMAGERIP FOR OMEGA OPTION
on a Gerber plotter using paths drawn on a "cut" layer for those applications that
generate vector print commands. The best production-oriented large format inkjet Raster Image Processing (RIP)
software on the market today. Accepts most image format files (JPG, TIF, BMP,
Plug-In features include: PCX, etc.), Corel® .CMX files and .GAD files from Gerber and third-party developed
software for printing on popular, large format inkjet printers such as Encad®,
• GerberColor foil CMYK and true spot color swatches Graphtec®, Mimaki® and Hewlett-Packard®. ImageRIP provides spectacular color
• Automated sequencing of multiple spot color printing to the Gerber Edge prints and has many powerful features, including support for small text, radial and
• Edge prompts for each foil cartridge linear fills, strokes and 24-bit color bitmap printing.
• Print and cut commands can be sent to an Edge and plotter to save time P722599A
• Control of foil color print order
• Assistance with setting separation lines and overlaps for large, paneled images
• Automatic print and cut repetition along the width and length of the material Additional benefits include:
• Automatic weed border generation • High production throughput provided by Rip&Print™ which offers simultaneous
job processing and printing
Driver features include: • Offers unlimited print size through continuous-length printing and job
• Automatic and adjustable settings for full range of materials paneling
• Process & spot colors • Superior performance as a 32-bit Microsoft Windows application,
including exceptional speed, multi tasking and more
Graphics
• Selectable halftone/LPI
• Rewind after printing • Decreased production output time through spool file creation for later use
• Reverse print order • Increased productivity through batch-processing of multiple inkjet jobs
• Backing white option • Powerful networking capability and compatibility with industry standard ICC
• Overprint option (over entire job) profiles
• Image scaling, mirror image and orientation selection
• Foil conservation control
• Repeats along material path
• Image scaling, mirror image and orientation selections
FONTS & FONT LIBRARIES
Gerber offers extensive selection of typefaces for any professional type challenge
form decorative and classic styles, to casual and script. Gerber fonts are hand
digitized to ensure superlative quality and conformance to architectural and
MACIMPRINT™ DIRECT OUTPUT OPTION industry standards.
Catalog MacImprint Gerber Edge enhanced fonts:
Number Direct Output Option
Gerber's unique Gerber Edge enhanced fonts allows easy creation of signs and
P73733A MacImprint™ 1.1 to 1.2 Upgrade Kit graphics of unmatched visual impact. Complete with computerized airbrush and
(Free to users registered prior to 4/17/00 only) dimensional effects, fades, fill... everything.
P72208A MacImprint™ 1.2 with Plotter Cable
P73526A MacImprint™ Gerber Edge USB Cable Option
(Includes USB Driver and USB Edge Cable)
P70577C MacImprint™ Option 1.2
with PCI Card and Plotter Cable
Gerber's philosophy has been to engineer and produce the finest products for the industry. Gerber Service commits to keep all Gerber systems operating at maximum
efficiency and to minimize downtime and costs that could negatively effect business.
Support First™
Acclaimed priority phone support
• Unlimited technical and application assistance by a Senior Technical Systems T-Shirts, Uniforms
Support Specialist and Caps
• Toll-Free, members only assistance phone number
• Priority queue/Express call back within one hour Outdoor
• Free express shipment of support disks and media Durable
Banners
• Automatic priority mailing of free updates Back-Lit
Signs
• National assistance hours of 8 a.m. to 8 p.m., EST, Monday thru Friday and Displays
Exhibit Graphics
• Special pre-release information on new and updated software
Graphics
Graphics
GAP-GP-9000 White Drawing Paper 30 50 1/2" Pattern
GAP-GM200015 Frisket Paper 15 50 Gerber Pattern
GAP-GM200030 Frisket Paper 30 50 Gerber Pattern
Graphics
P50528B 1/4" 3/16" 1-1/8" Engraving Bits • Short Type
P50527B 1/4" 1/4" 1/2"
P50524B 1/4" 1/4" 3/4"
For bottom-loading collet systems. Use with Router Motor or High Frequency
P50529B 1/4" 1/4" 1-1/2" Spindle options.
P50530B 1/4" 1/4" 2-1/4" Catalog Shank Cutting
Number Dia. Dia.
P50536A 1/4" .010"
P50537A 1/4" .020"
Single-Flute Radial Bits P50538A 1/4" .030"
Ideal for cutting sheet aluminum and brass with a thickness of .060" (1.5mm) P50539A 1/4" .060"
or less, soft woods and soft alloy aluminum. Has a single straight cutting edge P50540A 1/4" .090"
which doesn't pull up on the work piece. This allows the bit to shear the chip at
the top edge of the material without leaving a burr.
Catalog Shank Cutting Cutting
Number Dia. Dia. Edge Lgth.
P50532B 1/4" 1/8" 1/2"
P50533B 1/4" 3/16" 5/8"
P50534B 1/4" 1/4" 3/4"
P50535B 1/4" 1/4" 1-1/2"
.750" round nose cutter has a full 3/8" (9.5mm) radius on the bottom for
Graphics
.875" V cutter has a 45 degree V-shape for putting a bevel on edges or it can be
used for some engraving applications.
Catalog Shank
Number Description Dia.
P56327A For Advantage Router 600 1/4"
P50569A For Dimension 200 Table 1/4" AUTO-CARVE 3D CARVING BITS
P26495A .750" Round Nose Cutter 1/4"
Creates beautiful slopes and curves that traditional sign carvers produce. Designed
P26496A .875" V-Cutter 1/4" for the highest cut quality, maximum cutting efficiency and longest tool life.
Catalog Shank Tool Tool
Number Dia. Dia. Degree
P56371A 1/4" 1-1/4" 90°
P56372A 1/4" 1-1/4" 100°
P56373A 1/4" 1-1/4" 110°
P56374A 1/4" 1-1/4" 120°
V Cutter Round Nose Cutter Table Surfacing Bits P56375A 1/4" 1-1/4" 130°
P56376A 1/4" 1-1/4" 140°
P56377A 1/4" 1-1/4" 150°
SABRE ROUTERS
Gerber Sabre series mid-sized routers represent state-of-the-art in dimensional sign-making technology. Sabre series technologically advanced routers are precise, fast, flexible
and can be used with many different design programs. With a host of powerful manufacturing functions, Art Path™ quickly and accurately transforms two-dimensional
designs into tool paths. Art Path™ file converter can import or export standard file formates such as Adobe Illustrator (.AI), Encapsulated Postscript (.EPS) and Drawing
Interchange File format (.DXF) files. Hewlett Packard Graphic Language (.HPGL) files can also be imported. Gerber brand routers are known for premium quality
components and a precise, solid machine that will stay "true" and last many years, unlike all other brands.
Sabre mid-sized router features include:
• Advanced technology allows for amazing speed and phenomenal productivity. Servo-driven with 32-bit microprocessor controls provides extraordinary speed, power
and output. Anti-backlash lead screw-drives ensure accuracy, dependability, low maintenance and precise tolerances.
• Can be used with Graphix Advantage or other design software; 100' cable included.
• Art Path™ software is provided at no charge with each Sabre router.
• Patented vacuum shroud/pressure foot assembly provides extremely accurate depth control, reduces clamping requirements and creates a cleaner working environment
by removing waste chips. Includes all hoses and fittings. Heavy duty wet/dry shop vacuum must be supplied separately.
• Standard motorized Z-axis performs automatic multiple-depth cuts.
• Standard T-slot table with work clamps safely secures materials during cutting.
• Unique job-segmentation feature allows cutting signs of any length.
• Step resolution of .000078" (.0019mm) offers very high quality output.
• Also includes Accessory Kit, Table Slat Kit (installed) and Step Gage.
Graphics
SABRE 404 SABRE 408
Sabre 404 features an active cutting area of approximately 54" x 54" (1370mm Sabre 408 features an active cutting area of approximately 54" x 100" (1370mm
x 1370mm). x 2540mm).
P69356A P69358A
SABRE 404 WITH T-VAC VACUUM TABLE OPTION SABRE 408 WITH T-VAC VACUUM TABLE OPTION
Sabre 404 with T-Vac Vacuum Table incorporates all the features of the Sabre 404 Sabre 408 with T-Vac Vacuum Table incorporates all the features of the Sabre 408
with the addition of an installed vacuum table. T-Vac Table increases productivity with the addition of an installed vacuum table. T-Vac Table increases productivity
by allowing the choice of either vacuum hold-down or mechanical clamps. Includes by allowing the choice of either vacuum hold-down or mechanical clamps. Includes
vacuum table slates, manifold, hoses and fittings. Vacuum pump, filter and control vacuum table slates, manifold, hoses and fittings. Vacuum pump, filter and control
panel must be supplied separately. panel must be supplied separately.
P69357A P69359A
When selecting either the Sabre 404 or Sabre 408, either a Spindle Motor or AUTOMATIC TOOL CHANGER OPTION FOR SABRE 404 &
Router Motor option must be selected. 408
PORTER CABLE MOTOR OPTION The automatic tool changer (ATC) is designed to increase efficiency and production
output for multi-tool cutting applications for the Sabre 404 and Sabre 408 routers.
3.25 Porter Cable motor. Includes router motor, wrenches and required mounting Eliminates the need of manually changing the cutting tools and allows the operator
hardware. Motor Option includes the following accessory kit in addition to listed to perform additional tasks during the cutting operation. Automatic Tool Changer
components: option is as beneficial to a one person shop as it is to a large manufacturing facility.
• 3 cutting bits 1/8" x 1/4" LOC. ATC system is comprised of a 10hp spindle, 10 tool indexing turret, ATC controller
and a spindle controller. This option can be purchased factory installed on a new
• 3 cutting bits 1/4" x 3/4" LOC. Sabre or field retro-fitted to existing Sabre routers. Also includes:
• 1 .125" collet sleeve. • 3 tool holders.
• 1 .250" collet. • 3 cutting bits, 1/8" x 1/4" LOC.
• 1 .500" collet with nut. • 3 cutting bits, 1/4" x 3/4" LOC.
P69360A • 1 .125" collet.
• 1 .250" collet.
HIGH FREQUENCY SPINDLE OPTIONS
• 1 .500" collet.
High frequency spindle options provide infinately variable speed control and provides
quiet operation along with reduced maintenance. Spindle options include spindle, Factory installed systems must be ordered with new Sabre routers at time of
spindle controller, wrenches and required hardware. Refer to the High Frequency purchase.
Spindle Option fact sheet for additional information. All spindle options also include Catalog
the following accesory kit: Number Description
• 3 cutting bits 1/8" x 1/4" LOC. P67295A Sabre ATC 230V, Factory Installed
P67297A Sabre ATC 380V/460V, Factory Installed
Graphics
Graphics
ADVANTAGE ROUTER 600 High Frequency Spindle option includes spindle, spindle controller, wrenches and
w/T-VAC VACUUM TABLE OPTION required hardware. Also includes:
Advantage Router 600 with T-Vac Vacuum Table incorporates all the features of • 3 cutting bits 1/8" x 1/4" LOC.
the Advantage Router 600 with the addition of an installed vacuum table which • 3 cutting bits 1/4" x 3/4" LOC.
increases productivity by allowing for either vacuum hold-down or mechanical
clamps. Includes vacuum table slates, manifold, hoses and fittings. 12 individual • 1 .125" collet sleeve.
zones can be separately turned on further, maximizing productivity. Vacuum pump, • 1 .250" collet.
filter and control panel must be supplied separately. • 1 .500" collet with nut.
P69342A Advantage Router 600 Engraver Option turns the Advantage Router 600 into an
engraver as well with the capability to engrave down to 0.50" (12.7mm) letter
height. Includes a belt-driven .250" engraving spindle and motor installed on
the carriage in place of the router motor, 2 engraver cutters (.030" and .060"),
mounting brackets and an engraving vacuum hose.
P53560A
Engraver Vacuum System Option is a chip pick-up system for the Engraver
Option.
Advantage Router 600 Catalog
Shown with T-Vac table option Number Description
P53560A High Frequency Spindle Option, 7Hp-230V
P52573A Engraver Option
P47822D Engraver Vacuum System Option
DIMENSION 200
The Dimension 200 is a small-bed routing system. Ideal for shops that need three-
dimensional routing capabilities without the need for a full-sized Gerber routing
system. Designed for routing and engraving plastics, metals and woods. Uses a
3.25Hp motor and standard router bits, vacuum shroud/pressure foot assembly
and accessory kit. Provides approximately 35" x 31" (900 x 800mm) work
area. (2.25" or 57mm maximum material thickness.) Interface cable included.
ART Path™ software (serialized option) must be ordered separately, but is provided
at no charge when ordered with a Dimension 200.
P53263A
DIMENSION 200E
The Dimension 200E includes all the features of the Dimension 200 with the
addition of the engraving option, the engraver vacuum system and the stand
assembly. Includes a belt-driven 0.25" engraving spindle and motor along with
a standard router motor. This provides the dimension 200E with the capabilities
of both an engraver and router.
P53266A
Graphics
DIMENSION 200E WITH VACUUM TABLE
Dimension 200E with T-Vac vacuum table option.
P53613A
DIMENSION 200X
The Dimension 200X is Gerber's top-of-the-line router/engraver. It includes all
the features of the Dimension 200 with the addition of a unique floating Z-axis
carriage that allows precise routing and engraving without switching motors.
Features also include:
• High Frequency Spindle Option (replaces the standard router motor)
Provides Quiet, Variable Speed Operation up to 28,000rpm.
• Stand Assembly
• 3.25Hp, Variable-speed, Electric Router Motor and Standard Router Bits
• Mist Coolant Option (compressed air source required)
P53269A
High Frequency Spindle Option GerberRouter III to Advantage Router 600 Upgrade
Includes 1.35Hp spindle, spindle controller, cable and required hardware. Includes ARC box, power supply, hardware, 100' (30.5m) interface cable
P50131A and manuals. ART Path™ software is provided at no charge when ordering an
Advantage Router 600 upgrade. Call for information regarding GA revision levels
and conforming non-Graphix Advantage front-end systems.
Engraver Option P46930A
Includes belt driven 0.25" engraving spindle and engraving bits.
For serial numbers above 703,500.
P53659A BLOWER MOTOR PACKAGE
Includes 3.4Hp three phase blower motor, air filter, relief valve and electrical
Engraver Option control panel.
Includes belt driven 0.25" engraving spindle and engraving bits.
For serial numbers below 703,500. ATB1501AK32
P52575A
BLOWER MOTOR PACKAGE
Engraver Vacuum System Option Includes 2.35Hp single phase blower motor, air filter, relief valve and electrical
Includes belt driven 0.25" engraving spindle and engraving bits. control panel.
For serial numbers below 703,500.
ATB1501AV29Z
P47822D
Stand Assembly
Metal stand which supports the Dimension 200 at optimum working height.
P46821S
Graphics
Graphics
Pen Assembly P75044B Tool Height Gage P22186B 500' (152.5 Meters) P52624D
Pen Assembly Spring P26512A Work Clamp P21482B
Ball Point Pen, Black P32433A Work Clamp Nut P42378B
GRAPHIX ADVANTAGE ENGRAVING FONTS
Cannot be used for cutting vinyl.
E - Bauhaus Bold P50093A E - Harlow P50737A
DOUBLE-SIDED ROUTER TAPES E - Burgess P50738A E - Helvetica P39946A
Used to hold smaller work pieces to the router table. Also prevents small cut pieces E - Clarendon Bold P50085A E - Helvetica Medium P50091A
such as the center of an "O", from being "kicked" from the table. E - Contemporary P39943A E - Optima Semi Bold P50088A
1" x 60 Yards P71165A E - Double Line Century P39945A E - Roman 4 Line P39947A
2" x 60 Yards P71166A E - Dynamo P50094A E - Single Line Cursive P39951A
3" x 60 Yards P71167A E - Full Block P50086A E - Single Line Helvetica P39949A
4" x 60 Yards P71168A E - Futura Bold P50087A E - Western P50739A
E - Handel Gothic P50089A
NYLON ANCHORS
Catalog Head Put
Number Size Style Up
2410-32010 3/16" x 1" Truss 100
2410-48010 3/16" x 1-1/2" Truss 100
2415-32010 1/4" x 1" Truss 100
2415-48010 1/4" x 1-1/2" Truss 100
2415-64010 1/4" x 2" Truss 100
BOLT STOCK
Catalog Put
Number Description Up
1/4BOLT 1/4-20 x 36" Steel, Plated 15'
3/8BOLT 3/8-16 x 36" Steel, Plated 15'
1/2BOLT 1/2-13 x 36" Steel, Plated 15'
Hardware
Catalog Lag Bolt Put Catalog Lag Bolt Put
Number Size Up Number Size Up
L-1/4X1 1/4 x 1" 100 M-3/8X1 3/8-16 x 1" 100 Lag Bolt
L-1/4X2 1/4 x 2" 100 M-3/8X1.5 3/8-16 x 1.5" 100
L-1/4X3 1/4 x 3" 100 M-3/8X2 3/8-16 x 2" 100
L-1/4X4 1/4 x 4" 100 M-3/8X3 3/8-16 x 3" 100
L-1/4X6 1/4 x 6" 100 M-3/8X4 3/8-16 x 4" 50
L-3/8X2 3/8 x 2" 100 M-1/2X1 1/2-13 x 1" 50
L-3/8X3 3/8 x 3" 50 M-1/2X1.5 1/2-13 x 1.5" 100 Machine Bolt
L-3/8X4 3/8 x 4" 50
MFT-1/2X2 1/2-13 x 2" Full Thread 50
L-3/8X5 3/8 x 5" 50
MFT-1/2X3 1/2-13 x 3" Full Thread 50
L-1/2X2 1/2 x 2" 50 MFT-1/2X6 1/2-13 x 6" Full Thread 25
L-1/2X3 1/2 x 3" 50
L-1/2X3.5 1/2 x 3.5" 25
L-1/2X4 1/2 x 4" 25
L-1/2X5 1/2 x 5" 25
Full Thread Machine Bolt
L-1/2X6 1/2 x 6" 25
GUY CABLE
Ductile galvanized seven strand guy cable. For use where exposed
to weather.
Catalog Cable Put
Number Thickness Up
3/16X250 3/16" 250' Roll
JACK CHAIN
Zinc plated. Supplied in rolls.
Catalog Load Put
Number Size Limit Up
INT-JC-16 #16 10 lbs. 250'
INT-JC-14 #14 16 lbs. 200'
INT-JC-12 #12 29 lbs. 100'
Ordering Information
Items with "*" suffix indicates sizes desired:
Substitute "*" with 1 to 60 .
Substitute "**" with 1/8 to 1/2 by 64th.
Substitute "***" with 5/16, 3/8 or 1/2.
HEAT GUNS
Ideal wherever a fast, portable, flameless heat is needed.
Catalog
Number Description
Hardware
MAS-HG-751B 750˚-1000˚, 120V Heat Gun
MAS-043K Replacement Element for HG-751B
HEATING TAPES
General purpose heating tapes used for bending sheet plastic.
Supplied with a rugged 0-100% controller.
Catalog
Number Description
BRI-6 6'x1", 432 Watt w/Controller
BRI-8 8'x1", 576 Watt w/Controller
BLU-5518 BLU-5545
ALUMINUM LADDERS
Alaco aluminum ladders are heavy duty industrial quality ladders. All
aluminum construction guards against corrosion. 5200 series ladders
are standard extension type. 5210 series ladders have a combination
Hardware
RIVET TOOLS
PRP26A is a heavy duty rivet tool. PL-30 is a newly designed rivet tool with a protruding
nose. Other features include: hide away storage of extra nosepieces and wrench in the
bottom of ergonomically designed contoured grips. A compact easy flip-lock and
patented CAM link system which makes it easier to use. ROP-8000 has a two
position nosepiece which can be set in-line or at 90°. PRG510A is a production
quality pneumatic rivet gun. PRG511A comes equipped with an extended
Hardware
nosepiece. Guns are not supplied with an air line assembly. Order PRT5200-220
air line assembly if needed.
Catalog Max. EMH-PRP26A
Number Description Capacity Mfgr.
EMH-PRP26A Hand Riveter 1/8" Steel POP
EMH-PL-30 PowerLink 30 Hand Riveter 3/16" Steel POP
ROP-8000 Dual Position Hand Riveter 3/16" Steel Roper
EMH-PRG510A Air Riveter 3/16" Steel POP
EMH-PRG511A Air Riveter w/Ext. Nosepiece 3/16" Steel POP EMH-PRG510A
PRT5200-220 Complete Air Line Assembly - POP EMH-PRG511A
PRG511-003 PRG-510A to PRG-511 - POP EMH-PL-30
Conversion Kit
ROP-8000
Hardware
1908-16024 8-18 x 1/2" 100/1M
1908-24024 8-18 x 3/4" 100/1M 3005-40100 1/8 x 4 8-32 x 4 50
1909-16034 10-16 x 1/2" 100/1M
3010-30000 3/16 x 3 10-24 x 3 50
1909-24034 10-16 x 3/4" 100/1M
1909-32034 10-16 x 1" 100/1M 3010-40000 3/16 x 4 10-24 x 4 50
1909-40034 10-16 x 1-1/4" 100/1M 3015-30000 1/4 x 3 1/4-20 x 3 50
1909-48034 10-16 x 1-1/2" 100/1M
3015-40000 1/4 x 4 1/4-20 x 4 50
3015-50000 1/4 x 5 1/4-20 x 5 50 Toggle Screw
3015-60000 1/4 x 6 1/4-20 x 6 50 w/Snap-In Head
CHI-7759
Hardware
SOLDER & ACCESSORIES
Catalog Put
Number Description Up
INT-1001
INT-1001 50/50 Bar Solder, 1/2" x 3/4" x 13" 1 lb.
ACID-1 #1 Acid Swab 1
Acid-1
PRO-939
Ordering Information
Items with "*" suffix indicates size for tooling.
Hardware
Hardware
AN-S2-C-P S2-C Punch
AN-S2-C-D S2-C Die
AN-S2-C-B S2-C Base w/Pilot Pins
AN-S2-C-L S2-C Layout Tool
AN-PP-2491 S2-C Replacement Pilot Pin (2 Needed)
AN-211-P 211 Punch
AN-211-D 211 Die
AN-211-B 211 Base w/Pilot Pin
AN-211-PP 211 Replacement Pilot Pin, .310 Sq.
AN-209-PDB 209 Punch/Die/Base
Specifications
Capacity Mild Steel 20 ga.
Max. Bending Length 12"
Slot Depth 3/4"
Max. Jaw Opening 1-1/2"
Weight 185 lbs.
Hardware
5/8”
5/8”
Catalog Weight
Number (Lbs.)
CHA-BABY 17
9-1/5”
17-1/2”
WIL-2024
Shown mounted on
WIL-1624
Shown mounted on
Hardware
WIL-12276 stand. WIL-22277 stand.
CONNECTICUT BRAKE
Hardware
GLASS FILES
Quality file heat treated for long lasting cutting edges. Used for cutting
glass tubing. Manufactured with a red tang.
Catalog Put
Number Description Up
SIM-FILE-6 6" Warding Bastard File 12
Hardware
HACKSAW BLADES
Catalog Put
Number Description Mfgr. Up
BLU-1224UL-1 Hacksaw Blade, 12", 24 Teeth Per Inch Greenfield 10/100
BLU-1232UL Hacksaw Blade, 12", 32 Teeth Per Inch Greenfield 10/100
RUOFF NOTCHER
The Ruoff notcher is a punch press with an adjustable automatic feed designed
to punch shapes along the edge of sheet material. Sheet steel up to 16 gauge, 1
stainless up to 20 gauge, aluminum, plastics, cardboard or any sheet material
2
that can be punched can be handled by the Ruoff notcher.
Hardware
3
On automatic feed, this notcher can make up to 240 notches a minute. The 4
depth of the notches can be set from 1/8 to 7/8" and the distance between
5
notches can be adjusted from 5/16 to 1-1/8". Various die patterns available
are shown below. Notcher is supplied with a #1 pattern die and is equipped with
a 115/230 volt motor. RUO-93, a non-marring wheel set is also available and is Die Pattern
useful when working with pre-finished metals and delicate materials. Replacement
parts available upon request.
Catalog
Number Description Notched Flange
for Curved
RUO-RAN1 Automatic Notcher w/#1 Die Displays
RUO-1 #1 Punch and Die Set Notched Flange
RUO-2 #2 Punch and Die Set for Metal
RUO-3 #3 Punch and Die Set Letters
RUO-4 #4 Punch and Die Set
RUO-5 #5 Punch and Die Set
RUO-93 Non-Marring Feed Wheel Set
INTERSTATE ELECTRIC CO., INC.
2240 Yates Ave., Commerce, CA 90040 • 5435 Procyon, #100, Las Vegas, NV 89118 • 6860 Goodyear Rd., Benicia, CA 94510
F-17
VISE GRIP TOOLS
Catalog Jaw Throat Throat
Number Description Depth Depth Height
PET-6R 6" C-Clamp 2" 1-1/2" 2"
PET-8R 8" Sheet Metal Clamp - - -
PET-9R 9" Welding Clamp 1-5/8" - -
PET-10R 10" Pliers 1-1/4" - -
PET-11R 11" C-Clamp 3-3/4" 2-5/8" 3-3/4"
PET-18R 18" C-Clamp 7" 10" 4"
C-Clamp
PET-452 Replacement Spring for 5WR, 6R - - -
PET-422 Replacement Spring for 7R, 8R, 9R, 11R - - -
PET-408 Replacement Spring for 10R - - -
Hardware
• Drills
• Hammer Drills
• Reciprocating Saws
• Circular Saws
• Routers
• Nibblers
• Power Sanders
• Grinders
Catalog
Number Description
OTC-MIG-135 Welding Torch & Power Supply Kit
Comes complete with 20' gas hose, primary input cable
25' control cable and 25' ground cable clamp. CPSS-135 Power Supply
Shown with MIG-135
OTC-WTG-43 Welding Torch Only
Must be used in conjunction with a CPSS-135 Power Supply. welder and cables
WELDING WIRE
MB-4043 is best suited for aluminum and silicone alloys. This welding wire is made exclusively
for the MIG-135 and is installed easily. Wires for other applications available upon request.
Hardware
Catalog Weight Used Put
Number Description Per Roll For Up
MB-4043-030 Aluminum Wire, .030 ga. .44lb. 22 to 14 ga. 1/10/100
WELDING ACCESSORIES
Accessories for other applications available
upon request.
Catalog
Number Description
OTC-U2075J07 Long & Fine Tip, .030
OTC-U2075J06 Long & Fine Nozzle
OTC-U2464U04 Fine Tip, .030
OTC-U2464U01 Fine Nozzle
OTC-LTBS Long Torch Body Set
Hardware
PANEL SAW ACCESSORIES
Safety Speed Cut offers a full line of panel saw accessories. Shown are the most requested accessories. Some must be factory installed. Other accessories
and a complete catalog available upon request.
Mid-Way Fence Dust Collection Systems Hold Down Bar Quick Stop
For working with small pieces, the Available for all SSC machines to meet the A material hold down bar keeps thin A quick stop adds an easy to use
mid-way fence brings the work up environmental needs of production shops. and flexible materials tight against the method of making repeat cuts all
to waist-height and gives it fi rm A kit containing the dust hood and hose can frame for easier and safer cutting. Bars the same length to the saw. This
support on a flat surface for the best be connected into shop-wide dust systems feature spring fingers with non-marring accessory significantly increases the
alignment of the cut. The mid-way or a stand-alone system. A vacuum can rollers to hold difficult materials. productivity of the saw or router.
fence fits on both the left and right be installed with a 1HP or a 2-1/4HP Catalog Catalog
sides of the machine and includes motor fitted to either a 20 gallon tank Number Description Number Description
rulers and a manual stop block. or a 55 gallon adaptor.
SSC-H-440 H-4 Hold Down Bar SSC-H-6460 Quick Stop
Catalog Catalog SSC-H-550 H-5 Hold Down Bar
Number Description Number Description SSC-H-660 H-6 Hold Down Bar
SSC-H-6470 Mid-Way Fence SSC-H-456A Dust Collection System, 1 HP.
NESCHEN
Digital Imaging Mounting Adhesives
For many years, Neschen has produced the highest quality line of mounting adhesives in the world, possessing the name Gudy, which has long stood for excellence. In
addition to its superior quality, Neschen offers a large selection of products for every need.
Neschen USA's mounting adhesives can be used for many types and sizes of projects to enhance any kind of inkjet or laser print. The most innovative benefit of these
products is that they include a double-sided adhesive that can be the same or very different from each other. 328' length rolls may also be available. Sold by the
roll.
increases the object's thickness; the adhesive does can be applied to the face of graphics so that it can be
not rupture when cut or when the backing paper is applied to the inside of glass or acrylic. Has excellent
removed. clarity and can be used in outdoor applications for
general mounting.
Catalog Roll
Number Size Catalog Roll
Number Size
NES-26983 24.4" x 164'
NES-6005327 32.0" x 164' 3850FM-9956 38.0" x 150'
NES-6008502 41.0" x 164' 5150FM-9956 51.0" x 150'
NES-26984 48.8" x 164'
NESCHEN
Pressure Sensitive Laminating Films
Always test ink and media with laminates intended to be used.
Most inkjet prints are not waterproof and are only slightly RECOMMENDED FOR:
UV resistant. These films protect inkjet images against
moisture and mechanical damage. Depending on the Inkjet Prints
area of application, the use of UV films will protect images
against UV rays and double or triple the image life-span. Classical Photos
Neschen laminating films offer more than just protection
by also providing enhancement to the print quality. Electrostatic Prints
Sold by the roll.
FILMOLUX PHOTO GLOSS FILM FILMOLUX SATIN FILM FILMOLUX LUSTRE FILM
UV resistant 3mil, clear, semi-gloss PVC laminate with UV resistant 3mil, clear PVC film. Semi-matte finish UV resistant 3mil, clear PVC film. Provides a slight
a smooth finish. Ideal for high traffic areas. Suitable minimizes reflection. sheen while reducing reflective glare.
for applications both indoors and outdoors. Resists a
large number of aggressive substances. Catalog Roll Catalog Roll
Number Size Number Size
Catalog Roll NES-25688 24.4" x 164' NES-37411 32.7" x 164'
Number Size NES-25689 32.7" x 164' NES-6004645 38" x 164'
NES-33941 24" x 164' NES-6008475 38" x 164' NES-6008480 41" x 164'
NES-33942 32.7" x 164' NES-6008476 41" x 164' NES-36828 51.5" x 164'
NES-6008471 38" x 164' NES-25690 48.8" x 164'
NES-6008472 41" x 164' NES-6008478 51" x 164' FILMOLUX S-50 HIGH GLOSS FILM
NES-6008473 51" x 164' NES-6008479 61" x 164' A top quality 2mil, clear polyester film with a
NES-6004012 61" x 164' high gloss finish. Both indoors and out, the high
FILMOLUX 2004 FILM gloss composition of this film enhances prints and
FILMOMATT MATTE FILM A glossy, smooth 1mil film for writing on and emphasizes the brightness of the color with high
UV resistant 3mil, clear, matte PVC film with a wiping off with special markers. An inexpensive dimensional stability.
smooth finish. Virtually eliminates reflective glare. film particularly suitable for charts and menu boards. Catalog Roll
Ideally suited for blueprints, maps, warning signs For indoor use. Number Size
and drawings. Will accept special inks, pencil and NES-6007912 38" x 164'
permanent felt-tip pens. Catalog Roll
Number Size NES-6007913 51" x 164'
Catalog Roll NES-26116 24.4" x 164'
Number Size NES-33301 37.4" x 164' FILMOLUX UV-E FILM
NES-25975 32.7" x 164' NES-6009106 38" x 164'
NES-26119 48.8" x 164'
A high UV resistant 1.5mil, clear PVF (Tedlar) semi-
NES-6008481 38" x 164' gloss film. Ideal where reflective glare is a problem.
NES-6008482 41" x 164' Protects E-stat prints, ink-jet prints (80g/22lb min.
NES-6008483 51" x 164' FILMOLUX E SATIN FILM
NES-6008484 61" x 164'
paper), photographs and transparencies from dirt,
UV resistant 3mil, clear PVC laminate with a semi- fingerprints and UV rays.
matte finish. Ideal where reflective glare is a problem.
FILMOLUX E GLOSS FILM Protects E-stat prints, ink-jet prints (80g/22lb min. Catalog Roll
Number Size
paper), photographs and transparencies from dirt,
Laminating
NESCHEN
Pressure Sensitive Laminating Films cont.
Always test ink and media with laminates intended to be used.
RECOMMENDED FOR:
Inkjet Prints
Classical Photos
Electrostatic Prints
SEAL
Thermal Laminating Films
SEAL
Thermal Laminating Films and Adhesives Cont.
THERMASHIELD MB MULTIBOND HA
ThermaShield MB (Mount Backing) is a low- MultiBond HA mounting adhesive is a transparent ,
temperature (200°F), heat-activated, solid white heat-activated (195°F) adhesive film with a single
paper-based backing material with an outer release liner recommended for indoor applications.
polypropylene film surface that is ideal for backing This adhesive is idealy used for pre-coating boards or
prints in encapsulating applications. Its thickness prints on any commercial roller laminator to allow for
controls light bleed-through while offering the pliable one-step mounting and laminating.
rigidity needed for flexible applications. Also offers
additional protection to prints by providing an outer Catalog Roll
Number Size
surface that repels moisture, oils and dirt.
SEA-3978 51" x 250'
Catalog Roll
Number Size
10mil Opaque White Paper w/ Polypropylene film surface
SEA-3876 38" x 250'
SEA-3877 43" x 250'
SEA-3878 51" x 250' FLOOR GUARD
SEA-3879 55" x 250'
A premium non-slip, heat-activated (200°F)
laminating film with an aggressive solvent acrylic
adhesive specifically designed for the creation of
interior floor graphics. Offers a non-reflective textured
finish that affords clear viewing while also providing
a durable, scuff-resistant, waxable surface. Ideal for
STOPLIGHT BACKING FILM use with Print Mount Removable for a complete floor COLORMOUNT DRY ADHESIVES
An opaque, white, flexible backing film for graphics system. Meets international standards for A permanent dry mounting adhesive tissue for low
encapsulated images used in pop-up and panel slip resistance. temperature bonding (175°F to 200°F) of resin
display applications. A heat-activated polyester film Catalog Roll coated photos, glossy posters and regular papers to
offering rigidity and rollability with excellent lay-flat Number Size a wide range of mounting boards. Its breathability
memory while linerless for fast easy webbing and makes it ideal for non-porous or high moisture content
5mil Floor Guard PVC (4mil film/1mil adhesive)
minimal waste. Works equally well with ink jet, SEA-2962 38" x 200' materials.
electrostatic and photographic images and provides SEA-2961 51" x 200'
an excellent substrate solution for a wide range of Catalog Roll
Number Size
graphics applications that require extra durability.
SEA-609 20" x 150'
Catalog Roll SEA-615 24" x 300'
Number Size SEA-617 36" x 300'
9mil Stoplight #220 White (6mil film/3mil adhesive) SEA-618 40.5" x 150'
SEA-60077 34.6" x 150' SEA-620 42" x 150'
SEA-60660 38" x 200' SEA-621 42" x 300'
SEA-60675 51" x 200' SEA-623 48.5" x 300'
Laminating
PRINT SHIELD STANDARD GLOSS: A thin, glossy 3mil Pro Gloss Polyester (1mil film/2mil adhesive)
Catalog Roll SEA-1441 41" x 150'
Number Size finish that heightens color and sharpens definition.
SEA-1442 51" x 150'
2.2mil Ultra Gloss Polyester (1mil film/1.2mil adhesive) PRINT SHIELD STANDARD MATTE: A non-reflective, SEA-1443 51" x 300'
SEA-1688 25" x 200' smooth, clear, flat finish which adds definition and 3mil Pro Luster PVC (2mil film/1mil adhesive)
SEA-2336 38" x 200' depth. SEA-1451 41" x 150'
SEA-1375 41" x 200' SEA-1452 51" x 150'
SEA-1376-1 51" x 200' SEA-1453 51" x 300'
SEA-1359 51" x 400' Catalog Roll
SEA-4131 79" x 164' Number Size 4mil Pro Matte Polyester (2mil film/2mil adhesive)
SEA-1461 41" x 150'
4.5mil Ultra Luster PVC (3.5mil film/1mil adhesive) 2.6mil Gloss Polypropylene (1.6mil film/1mil adhesive)
SEA-62020 38" x 200' SEA-1462 51" x 150'
SEA-1656 25" x 150' SEA-1463 51" x 300'
SEA-1652-1 31" x 200' SEA-60082 41" x 150'
SEA-2337 38" x 200' SEA-60117 51" x 150'
SEA-60303 61" x 150'
SEA-1653-1 41" x 200'
SEA-1654-1 51" x 200' 4mil Matte PVC (3mil film/1mil adhesive)
SEA-1655 51" x 400' SEA-62022 38" x 200'
SEA-1689 54" x 200' SEA-60108 41" x 150' PRINT SHIELD ELEMENT
SEA-60211 51" x 150' Formulated with high levels of UV absorbers and
4.5mil Ultra Matte PVC (3.5 mil film/1mil adhesive) SEA-60404 61" x 150'
SEA-2338 38" x 200' aggressive solvent acrylic adhesive, Print Shield
SEA-2312-1 41" x 200' Element high gloss film extends the outdoor life of
SEA-2313 51" x 200' displays by minimizing environmental damage. Its
SEA-4132 79" x 164' polymeric construction makes it extremely durable
PRINT SHIELD DEEP CRYSTAL and increases the life expectancy of the film to 2
years in outdoor conditions. Use with an outdoor ink
Print Shield Deep Crystal is a unique, pressure- and media set along with Print Mount Ultra to create
sensitive overlaminate with a scratch-resistant, long lasting rigid outdoor displays.
Laminating
Print Mount Plus with Single Release Liner for use on flexible substrates.
SEA-1339 25" x 150'
SEA-1615 31" x 200' Catalog Roll
Number Size
SEA-2341 38" x 200'
SEA-1344-1 41" x 200' SEA-1889 51" x 200'
SEA-2333 43" x 200'
SEA-1347-1 51" x 200'
SEA-1348 51" x 400'
SEA-2342 61" x 200'
Print Mount Plus Wide with Dual Release Liner
SEA-4130 79" x 164'
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
Las Vegas: 702.795.2233 / 800.772.4141 / Fax 702.798.9911 • Benicia: 707.747.5115 / 800.824.0099 / Fax 707.747.1266
G-8
PROSEAL
Mounting and Laminating System
Seal brand laminators offer state-of-the-art features and can be used with both hot and cold laminates. Other models also available. Call for more information.
Optimount X X X X X X X X X
Thermashield R X X X X X X X
Thermashield MB X X X X X
(2)
Stoplight X X X X X X (2)
X X (2) X (2)
ProSEAL Board & Pouch X X X X X X X X X
NOTE: (1)
Only use ProSEAL Pouch Boards and Pouches (2)
Only Pressure-sensitive Materials (3)
Image 600D is 55" Hot/ 61" Cold, Medium/High Output Volume, Otherwise Same Specs
Sign Supplies
Acid Swabs ....................................................... F-9 Blades, Hacksaw ........................................... F-15 Clamps, Pony ................................................. F-10
Acrylic, Acrysteel .......................................... D-11 Blades, Knife .................................................. F-16 Clamps, Wedge ............................................. B-11
Acrylic, Duraplex .......................................... D-11 Blades, Panel Saw ......................................... F-21 Cleaners, Plastic ............................................ A-12
Acrylic, Framing Grade .................................. D-7 Blanks, Cold Cathode Lamp ........................... A-25 Cleaners, Vinyl ................................................ E-57
Acrylic, High Impact ........................................ D-6 Blanks, Foam Sheet ...................................... D-20 Clip Lights ...................................................... C-26
Acrylic, Impact Modified ........................ D-6, D-11 Blanks, Sign ................................................... A-8 Clips, Grounding ............................................. C-25
Acrylic, Non-Glare .......................................... D-7 Blind Rivets .................................................... F-5 Clips, Test .................................................A-58, C-19
Acrylic Sheet, Cell Cast .................................... D-5 Block, Neon Hand ......................................... A-62 Clock Movements .......................................... A-14
Acrylic Sheet, Extruded ................................... D-6 Blockout Paint .............................................. A-71 Cold Cathode Housings ................................. A-33
Acrylic Sheet, SG, Impact Modified ................... D-6 Blowers ........................................................ A-29 Cold Cathode Lamp Tubing ............................. A-25
Extrusions
Acrylic, Specialty Sheets .................................. D-7 Boards, Pro-Seal Pouch ................................... G-8 Color Cross Reference Chart ............................. D-8
Acrylic, Tuf Glas ............................................ D-11 Bolt Stock ........................................................ F-1 Compact Fluorescent Lamps .................. C-42, C-43
Acrylite FF, Cyro ............................................. D-6 Bolts ........................................................ F-1, F-7 Computers, PC ................................................ E-48
Acrylite GP, Cyro ............................................ D-5 Bombarders .................................................. A-60 Computer Sign Making Equipment .............. Section E
Acrylite SG, Cyro ............................................. D-6 Bond Wire ..............................................A-17, C-68 Conduit ......................................................... C-21
Acrysteel ....................................................... D-11 Books ............................................................. A-9 Conduit Bodies ............................................... C-22
Adaptors, Incandescent Lamp ........................... C-62 Boots .................................................. A-30, A-40 Conduit Bushings .......................................... C-22
Adhesives, Gudy ............................................. G-1 Box, Ballast Splice.............................................A-6 Conduit Couplings ........................................... C-24
Adhesives, HA Mounting .................................. G-5 Boxes, Electrical ..................................... C-16, C-17 Conduit Cutter,EMT ......................................... C-21
Electrical
Adhesives, Lord ........................................... A-13 Boxes, Transformer .......................................... A-9 Conduit Elbows ............................................... C-24
Adhesives, PS Mounting ........................... G-1, G-7 Brackets ......................................................... F-2 Conduit Locknuts ............................................. C-24
Adhesive Remover ....................................... E-57 Brakes, Metal ................................ F-12, F-13, F-14 Conduit Nipples ....................................... C-21,C-24
All Thread ................................................... C-22 Brakes, Sheetmetal ....................................... F-14 Conduit Plug Assembly .................................. A-31
Alucobond ...................................................... D-2 Breaker Bar .................................................. A-57 Conduit Plugs and Seals .................................. C-18
Alumalite ........................................................ D-3 Breakers, Circuit ............................................. C-18 Conduit Straps ................................................ C-25
Aluminum Architectural Cabinets ..........B-11 - B-17 Brushes .......................................................... A-9 Conduit, Threaded Pipe .................................. C-22
Aluminum Coils .............................................. A-73 Buffing Compound ........................................ A-10 Connector Bodies, Electrical ............................. C-20
Aluminum Flex Conduit ................................ C-21 Burners ........................................................ A-28 Connectors, Conduit ....................... C-22, C-23, C-24
Substrates
Aluminum Raceway ..................................... B-19 Bushings, Cable .................................... A-32, C-19 Cords ............................................................ C-26
Aluminum Sign Cabinets .............. B-1 - B-10, B-18 Bushings, Conduit ........................................... C-22 Cord Sets ....................................................... C-26
Aluminum Sign Kits ......................................... B-9 Bushings, Snap-in and Insulated ...................... C-18 Corks ........................................................... A-15
Aluminum Sheets, Mill Finished .......................... D-2 Bushings, Strain Relief .................................... C-19 Coroplast ................... See Corrugated Plastic Sheet
Aluminum Sheets, Pre-Finished .......................... D-1 Butcher Paper ............................................... A-74 Corrugated Aluminum Panels .......................... D-3
Aluminum Wireway ..................................... B-10 Buttons, Electrode ......................................... A-10 Corrugated Plastic Sheet ............................... D-15
Amberlith ...................................................... E-19 Butyl, Phthalate Oil ....................................... A-62 Couplings, Conduit .......................................... C-24
Angle Brackets ................................................ F-2 Covers, Electrical .................................... C-16, C-17
Animators, Neon Sign .................................... A-34 Crackle Glass Fill ........................................... A-14
Graphics
Anchors ........................................................... F-1 -C- Crimp Wire Terminals .................................... C-64
Application Fluid ............................................. E-57 Cable, GTO ..............................................A-17, C-68 Crossfires ...................................................... A-27
Application Tape ....................................E-34, E-35 Cable, Guy ...................................................... F-2 Cross Reference Chart, Plastic, Color ................ D-8
Applicators, Film ............................................E-32 Cable Supports ..........................................A-58, C-20 Cups, Glass ................................................... A-30
Asbestos Substitutes ...................................... A-74 Cable Ties ...................................................... C-20 Cut-off Switches .................................... C-17, C-63
Awl ............................................................... F-10 Cal-Mask ....................................................... E-23 Cutter, EMT ................................................... C-21
Capacitors .............................................. C-6 - C-14 Cutter, Glass ................................................. A-15
Cap, Edge ..................................................... A-44 Cutters, Wire ................................................. F-15
-B- Caps, Electrode .............................................. A-10
Hardware
Ballasts, Cold Cathode ...................................... A-5 Caps, Housing ...................................... A-30, A-31
Ballasts, Cross Reference Chart ........................ A-7 Caps, Insulating ............................................ A-39 -D-
Ballasts, Electronic Fixture ........................... C-4,C-5 Capsylite Halogen Lamps ............................... C-48 Dibond ........................................................... D-2
Ballasts, Electronic Sign ................................... A-1 Carbon Paper ................................................ A-74 Diecast Aluminum Lampholders ..................... C-37
Ballasts, Fixture ........................................ C-1 - C-6 Cardstock ..................................................... D-25 Dispensers, Cement .............................. A-12, A-13
Ballasts, HID .......................................... C-6 - C-14 Cartridges, EDGE ............................................... E-2 Dimmers ....................................................... C-27
Ballasts, HID E&P ............................................. C-9 Cartridges, MAXX Color .................................... E-6 Divider Bar .................................................... B-10
Ballasts, Sign ........................................... A-1 - A-4 Cell Cast Acrylic Sheet ..................................... D-5 D-Lite ............................................................. D-3
Ballasts, Warranty Information ......................... C-15 Cements ..................................... A-11, A-12, A-13 Drill Bits ......................................................... F-3
Laminating
Ballasts, Weatherproof ...................................... A-5 Cement Dispensers ............................... A-12, A-13 Ductseal ........................................................ C-25
Banner Material ............................................. A-8 Chain .............................................................. F-2 Duraplex ......................................................... D-11
Bare Copper Wire .................................A-17, C-68 Changers, Lamp ............................................ C-55
Bead Board ................................................... D-16 Changers, Letter ......................... A-46, A-49, A-50
Bender, Conduit ............................................ C-18 Channelume ................................................ A-44 -E-
Bird Control .................................................. A-76 Chasers ............................................... A-34, A-37 Econolite ........................................................ D-3
Bits, Computerized Router ............ E-58, E-59, E-60 Chipboard .................................................... D-25 Edge Cap, PVC ............................................... A-44
Bits, Drill ........................................................ F-3 Chokes, Bombarder ....................................... A-60 Edging .......................................................... A-14
Bits, Hand Tool Router ..................................... F-9 Chokes, Interference ..................................... C-28 EDGE Cartridges .............................................. E-2
Bits, Screwdriving ............................................ F-9 Circuit Breakers .............................................. C-18 EDGE Fonts and Accessories .............................. E-3
"Black & White" Plastic Sheet .......................... D-7 Clamps, Grounding .......................................... C-25 EDGE Imaging Systems ................................... E-1
Commerce: 323.803.2000 / 800.225.5432 (CALL IEC) / Fax 323.803.2019
Las Vegas: 702.795.2233 / 800.772.4141 / Fax 702.798.9911 • Benicia: 707.747.5115 / 800.824.0099 / Fax 707.747.1266
Index
EDGE Ready Materials ......................... E-15 - E-18 Foam Board, Foam-X ........................... D-21, D-22 High Impact Acrylic ....................................... D-11
Sign Supplies
Edge Light Plastic Sheet ................................... D-7 Foam Board, Kapa-Bloc ................................. D-23 Hole Saws ....................................................... F-4
Elbows, Conduit .............................................. C-24 Foam Board, Mightycore ............................... D-24 Hose .......................................................... A-107
Electrical Connector Bodies ............................. C-20 Foam Board, “Ultra” Varieties .............. D-26, D-27 Hot Knife ...................................................... C-74
Electrical Tape ............................................... C-64 Foam Board, Valuboard ................................ D-18 Housings .................................... A-30, A-31, A-33
Electro Pounce .............................................. A-75 Foam Blanks .................................................D-20 Housing Boots ............................................... A-30
Electrodes ..................................................... A-16 Foam Sheet, Bead Board ............................... D-16 Housing Caps ....................................... A-30, A-31
Electrode Buttons .......................................... A-10 Foam Sheet, Sign-Foam ................................ D-12
Electrode Caps .............................................. A-10 Fome-Cor ............................................. D-17, D-18
Electrode Cement .......................................... A-10 Foam-X ............................................... D-21, D-22 -I-
Electrode Cross Reference Chart ..................... A-17 Fonts, EDGE ..................................................... E-3 Ignitors, HID .................................................... C-8
Extrusions
Electrode Holders .......................................... A-26 Frame, Border ................................................ B-10 Impact Modified Acrylic ......................... D-6, D-11
Electrode Insulators ....................................... A-39 Frame, Sign ............................................. Section B Incandescent Lamps ............................ C-44 - C-47
Electrode Savers ........................................... A-10 Framing Grade Acrylic ..................................... D-7 Injectors, Mercury ......................................... A-58
EMT Conduit .................................................. C-21 Frisket Paper .................................................. E-57 Inks, HP Designjet ......................................... E-40
Endon Lamps ................................................ C-54 Fuses ............................................................ C-38 Inks, 3M Printing ........................................... E-32
Engraving Bits ....................................... E-59, E-60 Insulators, Glass G Cup .................................. A-30
Epsilon Foam Sheets ....................................... D-16 Insulators, Neon .................................. A-30, A-31
Exit Signs ....................................................... C-28 -G- Insulators, Through Wall ................................ A-32
Extrusion Accesories ................................. Section B G Cup Insulators ........................................... A-30 Interference Filters ........................................ C-28
Electrical
Fiber Optic Lighting Systems ................. C-70, C-71 Gerber Equipment ...................................... Section E -K-
Fiber Optic System Options ............................ C-73 Gerber Service & Support .............................. E-56 Knives ........................................................... F-16
Fiber Optic Track and Accessories .................... C-74 Gerber Software .................................. E-52 - E-55 Knockout Seals .............................................. C-18
Files ............................................................. F-15 Germicidal Lamps .......................................... C-43 Knockdown Sign Kits ....................................... B-9
Film, 3M Vinyl ...................................... E-27 - E-32 Glass Cups .................................................... A-30 KapaBloc ........................................................ D-23
Film, Arlon Vinyl ................................... E-20 - E-25 Glass Cutter ......................................... A-15, F-15
Film, Coburn Special Effect ................................E-32 Glass Green Acrylic Sheet ................................ D-7
Film, Gerber Vinyl ................................... E-8 - E-19 Glass Tubing ....................................... A-20 - A-25 -L-
Film, Gold Leaf .............................................. E-33 Glenroy Laminating Films ................................ G-9 Label Stock .................................................... E-15
Graphics
Film, Neschen Pro-Gloss Vinyl ........................ E-26 GP Acrylic Sheet ............................................. D-5 Ladders .......................................................... F-4
Film, Static Cling ............................................. E-15 Graphix Advantage .................................... Section E Laminated Plywood Panels .............................. D-4
Film Applicators ..................................................E-32 Graphtec Plotters .................................... E-43, E-44 Laminating Adhesives, HA ............................... G-5
Filmolux ................................................. G-2, G-3 Grease, Stopcock ........................................... A-59 Laminating Adhesives, PS ........................ G-1, G-7
Films, Glenroy Laminating ............................... G-9 Green Edge Acrylic Sheet ................................. D-7 Laminating Films, HA ....................... G-4, G-5, G-9
Films, HA Laminating ....................... G-4, G-5, G-9 Greenfield, Non-Metallic ................................ C-21 Laminating Films, PS ................. G-2, G-3, G-6, G-7
Films, Neschen Laminating ....................... G-2, G-3 Grounding Devices .......................................... C-25 Laminators ............................................. G-8,G-10
Films, PS Laminating ................. G-2, G-3, G-6, G-7 Gold Leaf Film ................................................ E-33 Lamp Changers .............................................. C-55
Films, Seal Laminating ............................ G-4 - G-8 GTO Cable ...............................................A-17, C-68 Lamp Comparison Data ................................. C-53
Hardware
Filters, Electrical .............................................. C-28 GTO Connectors ............................................. A-40 Lamp Sleeves ................................................. C-55
Fires ............................................................. A-27 GTO Insulators .............................................. A-40 Lampholders, Fluorescent ....................... C-56 - C-59
Fixtures, Fluorescent ............................ C-29 - C-32 Gudy Adhesives .............................................. G-1 Lampholders, Fluorescent Fixture C-57, C-58, C-59
Fixtures, HID ...................................... C-33 - C-36 Guy Cable ....................................................... F-2 Lampholders, Fluorescent Sign ....................... C-56
Fixtures, Incandescent ................................... C-37 Lampholders, Incandescent ...................... C-60, C-61
Fixtures, Nuart Outdoor ............................... C-32 Lampholders, HID ........................................... C-59
Fixtures, Quartz Light .................................... C-32 -H- Lampholders, Pin-Type Sign ........................... C-61
Fixtures, Vaportight .............................. C-36, C-37 Hacksaw Blades ............................................ F-15 Lampholder Shields ......................................... C-56
Flanges, Pole .............................................. A-102 Hand Fires .................................................... A-26 Lampholders, Tungsten
Laminating
Flasher Parts ................................................. A-36 Handy Boxes ....................................... C-16, C-17 Halogen and Quartz .............................. C-60,C-61
Flashers ..................................... A-34, A-35, A-37 Hanger Bar ................................................... A-44 Lamps, 10' .................................................... C-55
Flashers, Thermal ............................................ C-38 Heat Guns ....................................................... F-3 Lamps, Endon ................................................. C-54
Flexible Conduit ............................................ C-21 Heating Strips ................................................. F-3 Lamps, Osram/Sylvania ........................ C-39 - C-52
Flexible Sign Face Substrate .......................... A-38 Hewlett Packard Inks and Papers ................... E-40 Lamps, Supervision Replacement ................... C-74
FlexiSign Software ......................................... E-45 Hewlett Packard Printers ............................... E-41 LED's, Channel Letter ........................... A-41, A-42
Fluorescent Lamps ............. C-39 - C-43, C-54, C-55 HID Lampholders, Mogul Base........................ C-59 LET-R-EDGE ................................................... A-44
Foam Board, Gatorfoam ................................. D-19 HID Lamps ........................................... C-51, C-52 Letters ............................................... A-45 - A-51
Foam Board, Fome-Cor.............................D-17, D-18 Letterbrakes ......................................... F-12, F-13
Sign Supplies
Letter Trim Accesories .................................... A-44 P95 Plastic Sheet ............................................. D-7 Quartz Lamps ............................................... C-49
Lexan .................................................... D-9, D-10 Paint, Akzo ...................................A-67, A-68, A-69
Light Meters .................................................. C-65 Paint, Blockout ............................................. A-71 -R-
Liquid Tight Flex Conduit ............................... C-21 Paint, Matthews .......................... A-63, A-64, A-65 Raceway and Wireway ......................... B-10, B-19
Locknuts, Conduit ............................................ C-24 Paint, One-Shot ............................................. A-70 Rack for Vinyl ................................................. E-57
Lock Washers ................................................... F-2 Paint, Ronan ................................................. A-71 Rapid Tac Fluids ............................................. E-57
Long Lamps .................................................. C-55 Paint, Spraylat .............................................. A-66 Razor Blades ................................................. F-16
Lumasite ....................................................... D-15 Paint, Texcote ............................................... A-72 Receptacles, Electrical .................................... C-20
Lusterboard ..................................................... D-4 Paint Rollers ................................................. A-73 Reducers, Incandescent Lamp.......................... C-62
Panaflex ....................................................... A-38 Reducing, Washers .......................................... C-25
Extrusions
Paper ........................................................... A-74 Remover, Vinyl ............................................... E-57
-M- Paperboard .................................................. D-25 Repellents, Bird ............................................ A-76
Magnets ........................................................ A-57 Paper, Drawing/Pouncing ....................... A-74, E-19 Ribbon Burners ............................................. A-28
Magnets, Letter Trim ..................................... A-44 Paper, Tracing ................................................. E-57 Rigid Conduit ................................................ C-21
Magnetic Sheeting .......................................... A-15 Parts For Flashers ......................................... A-36 RIP Software ................................E-45, E-46, E-47
Mandrels, Hole Saw ......................................... F-4 Passthru, Electrobits....................................... A-32 Rivets, Metal ................................................... F-5
Manifold Systems, Neon ....................... A-52, A-54 Pencils .......................................................... A-75 Rivets, Nylon ....................................... A-46, A-49
Manifold Parts .............................................. A-53 Photo Controls ................................................ C-62 Rivet Tools ...................................................... F-5
Map Measures ............................................... F-16 Pipe Nipples, Rigid ........................................ C-21 Rivet Tool Parts ............................................... F-6
Electrical
Masking Material .......................... E-23, E-34, E-35 Pipe, Threaded .............................................. C-22 Rivet Brush .................................................... E-32
Masks, Dust and Mist .................................... A-72 Plascotrim .................................................... A-43 Roller Tray for Vinyl ...................................... E-57
MAXX Color Foils ............................................. E-6 Plastic, Acrysteel I-GP ...................................... D-11 Rollers, Paint ................................................ A-73
MAXX 2 Imaging System ................................. E-5 Plastic, "Black & White" ..................................... D-7 Rotating Units ................................. A-103 - A-105
MAXX Ready Materials .................................... E-8 Plastic, Cell Cast, GP ......................................... D-5 Rotating Unit Accessories ............................. A-106
MDO/MDF/Medex Panels................................ D-4 Plastic, Corrugated Sheet ............................... D-16 Routers, Computerized ......................... E-61 - E-65
Medex ........................................................... D-4 Plastic, Duraplex .......................................... D-11 Router Accessories .................................... E-67, F-9
Media, Azon ................................ E-37, E-38, E-39 Plastic, Impact Modified ......................... D-6, D-11 Router Bits ............................. E-58, E-59, E-60, F-9
Media, 3M, TIJ .............................................. E-36 Plastic, Extruded, FF..................................... D-6 Router Tape .................................................... E-67
Substrates
Medium Base Lampholders ................... C-60, C-61 Plastic, Framing Grade .................................... D-7 Rubber Stoppers ........................................... A-15
Mercury ....................................................... A-57 Plastic, Lexan/Polycarbonate .................. D-9, D-10 Rubber Tubing ............................................ A-107
Mercury Injectors .......................................... A-58 Plastic, Lumasite ............................................. D-15 Rubylith ......................................................... E-19
Mercury Spill Kit ........................................... A-57 Plastic, Non-Glare ........................................... D-7
Meters, Light ................................................. C-65 Plastic, SG, Impact Modified ............................ D-6
Meters, mA ................................................... A-56 Plastic, Specialty Sheets ................................... D-7 -S-
Methanol ...................................................... A-12 Plastic, Styrene .............................................. D-15 Sandblasting Material ............................. E-19, E-42
Mica ............................................................. A-57 Plastic, Tuf-Glas .............................................. D-11 Saws, Hole Saws .............................................. F-4
MightyCore ..................................................... D-24 Pliers ............................................................ F-15 Saws, Panel .......................................... F-20, F-21
Graphics
Monument Sign Frames .......................... Section B Plotter Accessories, Graphtec .................. E-43, E-44 Scanners ........................................................ E-48
Mounting Adhesives ......................... G-1, G-5, G-7 Plotter Accessories, Gerber, Misc. ........... E-50, E-51 Scanvec Software ................................... E-45, E-46
Plotter Blades & Access., Aftermarket .............. E-57 Scintillators ................................................... A-34
Plotter, Envision, EDGE ..................................... E-4 Screws ............................................................ F-7
-N- Plotter, Odyssey, MAXX ..................................... E-7 Screws, Grounding .......................................... C-25
Nail Straps .................................................... C-25 Plotters, Gerber, Misc. ........................... E-49, E-51 Screwdriving Accessories .................................. F-9
Neon Color Checkers and Testers .................... A-56 Plotters, Graphtec ................................. E-43, E-44 Seal Digital Imaging Prod's. ........... G-4 - G-8, G-10
Neon Display Cases ..................................... A-102 Plugs, Conduit ................................................ C-18 Seals, Conduit ................................................ C-18
Neon Pumping Equipment ............................. A-55 Plugs, Electrical ............................................... C-20 SG Acrylic Sheet .............................................. D-6
Hardware
Neschen Digital Imaging Prod's. ..........G-1, G-2, G-3 Plywood Sign Panels ......................................... D-4 Shear, Angle Iron .......................................... F-14
Nipples, Conduit ..................................... C-21, C-24 Polycarbonate ....................................... D-9, D-10 Shear, Squaring ............................................. F-14
Non-Glare Acrylic Sheet ................................ D-7 Postershop Software ...................................... E-47 Sign Blanks .................................................... A-8
Non-Metallic Flex Conduit .............................. C-21 Pouch Boards/Pouches ................................... G-8 Sign Cabinets ........................................... Section B
Notcher, Ruoff ............................................... F-16 Pounce Wheels .............................................. A-75 Sign-Foam ..................................................... D-12
Notcher, Hand ............................................... F-10 Pole Flanges ............................................... A-102 Signboard ....................................................... D-4
Nuts ............................................................... F-5 Power Slitters .............................................. F-13 Sign Face Substrates ...................................... A-38
Power Supplies, LED ............................. A-41, A-42 Signgold ........................................................ E-33
Power Tools ................................................... F-18 Signply ........................................................... D-4
Laminating
-O- Primer ......................................... See Paint Listing Silicone Sealant .............................................. A-12
Omega Lusterboard/Signboard ........................ D-4 Primer, J. Cookes .......................................... A-72 Sintra .................................................. D-13, D-14
Omega Software, Gerber .............. E-52, E-53, E-54 Printers, Hewlett Packard ............................... E-41 Sleeves, Insulating ............................... A-39, A-40
Onyx Software .............................................. E-47 Punches ...................................... F-10, F-11, F-14 Sleeves, Lamp ............................................... C-55
“Orange Peel” Remover ................................ E-57 Pumping Equipment, Neon ............................ A-55 Sleeving, GTO ............................................... A-40
Outlets, Electrical ............................................ C-20 Pumps, Vacuum ............................................ A-61 Slitters, Metal ................................................ F-13
Oil ................................................................ A-62 Pump Oil ...................................................... A-62 Snap-in Bushings ........................................... C-18
O-Ring Grease .............................................. A-59 PVC, Sintra Sheet ................................. D-13, D-14 Snips, Hand .................................................. F-10
Snubber ....................................................... A-37
Sockets ........................ See "Lampholders"/"Outlets"
Tape, Router ................................................... E-67 Vinyl Film, Neschen Pro Gloss .......................... E-26
Tapes, Heating ................................................. F-3 Vise-Grip Tools ............................................... F-17
Teepees ................................................... A-1, A-2 Voltage Testers ............................................... C-65
Temperature Gauges and Indicators ............... A-59
Terminals, Wire ............................................... C-64
Tensioning Tool ............................................. B-11 -W-
Test Clips ........................................A-58, C-19 Wall Plates .................................................... C-18
Testers, Electrical ........................................... C-65 Washers .......................................................... F-2
Testers, Neon Tube ......................................... A-56 Washers, Reducing .......................................... C-25
Hardware
Thinner ....................................... See Paint Listing Weather Proof Boxes and Covers ................... C-17
Threaded Pipe Conduit ................................... C-22 Wedge Clamps .............................................. B-11
Through Bushings ......................................... A-31 Welder .......................................................... F-19
Through-Wall Conduit Kit ............................... A-32 Welding Wire ........................................ F-18, F-19
Ties, Cable .................................................... C-20 Wide Format Media ............................. E-36 - E-40
Tie Wire .............................................A-17, C-68 Wire .............................................................. C-68
Time Switches ................................................. C-65 Wire Connectors .............................................. C-69
Toggle Bolts .................................................... F-7 Wire Guard For Fixtures ................................ C-37
Toggle Switches ............................................. C-64 Wire Terminals ............................................... C-64
Laminating