Professional Documents
Culture Documents
2015MemoryCatalog With Page Numbers
2015MemoryCatalog With Page Numbers
www.datacan.ca
Product Catalog
1
2
Table of Contents
DataCan DataCan Products
Introduction 4 Accessories
Software 5-6 Gauge Carrier 39
11
Quartz Pressure Gauges 7-8 1 /16” Roller Centralizer 40
3
/4” Quartz DXB II 9 1 1/4” Spring Centralizer 41
1
1 /4” Quartz DXB 10 Shock Absorbers 42
1
1 /4” Quartz DXB II 11 Bomb Well Carriers 43
1
1 /4” Quartz VQ 12 Pressure Verification 44
Quartz Module LTR 13 Assembly
Piezo Pressure Gauges 14-16 Downhole Shut In Tool 45-46
1 3
/2” Piezo 17 2 /8” Production Valve 47
3 1
/4” Piezo 18 3 /2” Production Valve 48
3 1
/4” Piezo with 4 Million 19 4 /2” Production Valve 49
Sample Capacity 7” Production Valve 50
3
/4” Welded Piezo 20 Universal Drive 51
3
/4” Piezo Accelerometer 21 Battery Pack Information 52-54
1
1 /4” Piezo 22 Battery Packs 55-56
1 1/4” Welded Piezo II 23 Smart Battery 57-58
1
1 /4” Welded Piezo III 24 Battery Tester 59
3
1 /8” Welded Piezo 25 O-Ring Information 60-61
1” Side Pocket – Tubing 26 Redress Kits 62
1” Side Pocket – Annulus 27 Surface Testing Suite 63
1
1 /2” Side Pocket Carrier 28 Single Channel Logger 64
1
1 /4” Piezo RTD 29 Quartz Wellhead Logger 65
Production Logging Tools Multi-Channel Logger 66-67
Basic Logging Tool 30 Quartz Multi-Channel Logger 68
Mini Logging Tool 31 Digital Chart Recorder 69
Burst Tool 32 Pressure Transmitter 70
1
1 /4” Burst 33 Quartz Pressure Transmitter 71
Geothermal Tools 34 Temperature Transmitter 72
1 3/4” Geothermal 35 Wireless Press Transmitter 73
Specialty Items Wireless Temp Transmitter 74
3
/4” Inclinometer/Vibration 36
Digital Clock 37
Needle Valve Assembly 38
www.datacan.ca info@datacan.ca
3
Introduction
DataCan About DataCan
Introduction
DataCan specializes in the design and manufacture of downhole pressure and temperature
monitoring solutions. We consider ourselves responsible for “the next generation of downhole
tools”.
Since 2006, DataCan has been strategically developing new technologies. DataCan started with
memory pressure and temperature gauges,
quickly added surface read out telemetry, and
then built a customizable permanent monitoring
system.
Acceleration sensors were added to our pressure gauges for memory and real time pump
monitoring. At the same time, a pressure trigger and 10 samples per second code was made
available for our pressure gauges.
Finally, a casing collar locator and external fast response temperature probe were combined to
create a leak detector and a geothermal tool was built, allowing DataCan’s technology to
operate in wells up to 315 °C.
www.datacan.ca info@datacan.ca
4
Software
DataCan DataCan Program & Download
Software
• Easy to use
• Industry’s fastest graphing package available
• Easy installation on Windows Xp thru 8
A new user can program a tool, and download data in seconds. You can easily change units,
and view data in real time. Our graphing package is fast and powerful, making a detailed report
is easy. You can customize your report, add your logo, change colours, and easily add
comments.
www.datacan.ca info@datacan.ca
5
Software
DataCan DataCan Program & Download
If you make a mistake during the creation of your report or graph, DataCan even has an undo
button.
We have a battery calculator built into the software to quickly estimate battery life for given
jobs. You can change units at any time.
DataCan’s software controls all of our tools, every memory pressure gauge, shut in tool, digital
clock, permanent surface box, surface logger, and depth system is configured using one easy to
use software program.
www.datacan.ca info@datacan.ca
6
Memory Pressure Gauge
DataCan Quartz Memory
Quartz Memory
• Downhole pressure and temperature measurement
• Pressure up to 30,000 psi maximum
• Accuracy of up to +/- 0.020% full scale
• Resolution of 0.00006% full scale
• Temperature up to 200 °C maximum
• Accuracy of +/-0.25 °C
• Resolution 0.005 °C
• 2 million data sets of memory
• 1 second to once a day sampling
DataCan uses the newest Quartzdyne® type transducers for all of our quartz pressure gauges.
All of our transducers have Hybrid electronics which can withstand temperatures up to 225 °C.
Quartz works hot – If you need a high temperature solution, you need quartz. Piezo sensors
tend to drift at temperatures above 150 °C (the diffusion layer in the silicon die begins to leak
resistance). Quartz tools will operate to temperatures around 200 °C, and the data will remain
stable.
Quartz has high resolution – 100 times more resolution than a piezo tool (0.00006% vs
0.0003% Full Scale). The quartz sensing technology is inherently averaged. The transducer is
making 10,000 pressure measurements per second and averaging them. The result is very
high resolution data.
Quartz is more stable – Less drift than a Piezo tool. Typically you can go 2 years or more
between calibrations with a quartz tool. Quartz tools are preferred for long term high
temperature jobs.
The actual quartz sensor is a fairly large piece of machined quartz. One quartz disc is placed
between two quartz drums. The disk vibrates like the skin of a drum. As pressure increases
around the sensor assembly, the disk stretches and the natural frequency of the disk changes.
www.datacan.ca info@datacan.ca
7
Memory Pressure Gauge
DataCan Quartz Memory
All of DataCan’s quartz tools use hybrid oscillating circuits. Hybrid circuits are 100 times more
reliable than standard surface mount (soldered) electronics.
Hybrids, like the one above, have no plastic parts. The raw die is mounted onto a ceramic substrate.
The resulting structure is much smaller, and will work reliably to higher temperatures (up to 225°C)
A modular memory cartage means that DataCan’s quartz tools can be upgraded in the field. At any
time, a DataCan customer can change the memory module out for a surface readout module.
DataCan Quartz tools have significant advantages over the competition. DataCan’s quartz design
maximizes the thermal response of the quartz sensor. The picture below shows the caged bullnose
that DataCan uses to expose the pressure (green) and temperature (red) crystals to the wellbore.
DataCan’s mechanical package uses electron beam welding to reduce leak paths. DataCan has one
tool joint, the competitions’ tools have up to three. As well as reducing the number of potential leak
paths, DataCan has improved their seal joint. A common seal failure is extrusion. DataCan’s seal
design uses a metal to metal beveled seal to eliminate the extrusion gap.
www.datacan.ca info@datacan.ca
8
Memory Pressure Gauge
DataCan 3/4" Quartz DXB II
1/2" - 13 UNC Pin
0.625
Features
Specifications
www.datacan.ca info@datacan.ca
9
Memory Pressure Gauge
DataCan 1 1/4" Quartz DXB
3/4" - 16 UNF
Amerada Pin
1.063
Features
2 X "Sub CC"
Battery Barrel Super Seal Technology
30,000 psi @ 1.25” OD
4.5
200°C Option
1 X "Sub CC" Modular Memory Cartridge
Battery Pack
2 Million Sample Capacity
Inconel 718 or MP35N – NACE MR0175
Fast Response
10
Memory Pressure Gauge
DataCan 1 1/4" Quartz DXB II
3/4" - 16 UNF
Amerada Pin
3 X "CC"
Battery Barrel
2 X "CC"
Features
Battery Pack
For Extra Long Term Tests
One Leak Path
Metal to Metal C-Ring
Triple O-Ring
200°C Option
Modular Memory Cartridge
2 Million Sample Capacity
Inconel 718 or MP35N – NACE MR0175
Fast Response
Replaceable Memory
Module
1.25" OD Quartz DXB II Mem ory Tool - Inconel 718
Pressure Tem perature Part No.
10,000 psi 150°C 100017
16,000 psi 150°C 101695
16,000 psi 177°C 101696
16,000 psi 200°C 101697
20,000 psi 177°C 101698
26.3
20,000 psi 200°C 101699
Specifications
Pressure Tem perature
Accuracy 0.020% F.S. 0.25°C
Resolution 0.00006% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 2 Million Samples
3/4" - 16 UNF Comm unication Method USB
Amerada Box
www.datacan.ca info@datacan.ca
11
Memory Pressure Gauge
DataCan 1 1/4" Quartz VQ
3/4" - 16 UNF
Amerada Pin
Features
1.063
Quartz Technology at the Lowest Price
High Quality Data
1 X "C" Low Operating Costs
Battery Pack Easy to Operate
Powerful Easy to Use Software
Specifications
Pressure Tem perature
Accuracy 0.020% F.S. 0.25°C
Resolution 0.00006% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 2 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
12
Memory Pressure Gauge
DataCan Quartz Memory Module LTR
Features
BLUE
GREEN
RED
www.datacan.ca info@datacan.ca
13
Memory Pressure Gauge
DataCan Piezo Memory
Piezo Memory
• Downhole pressure and temperature measurement
• Pressure up to 25,000 psi maximum
• Accuracy of up to +/- 0.022% full scale (Typically 0.03%)
• Resolution of 0.0003% full scale
• Temperature up to 177 °C
• Accuracy of +/-0.25 °C
• Resolution 0.005 °C
• 1 million data sets of memory
• 1 second to once a day sampling
• Special gauges can sample 10 times a second, or even up to 32,000 times a second
• Pressure triggers are available
• Accelerometer sensors can be added to the board to measure vibrations
• External fast response temperature sensors can be added
Piezo, refers to the “piezoresistive” effect of the silicon sensor. A piezoresistive semi-conductor
will see a change in resistivity due to a change in mechanical stress. Hence, a change in
pressure or temperature results in a change in resistance.
Some people call these tools "sapphire" or "strain” gauges. In every case, the same
piezoresistive silicon sensor is used.
Piezo is less expensive - Less than half the price of a quartz pressure gauge.
Piezo is small – Which means it responds quickly to changes in pressure and temperature. This
makes piezo gauges suitable for gradients.
Piezo is fast – We have piezo circuits which can sample up to 32,000 times per second.
Perforating events can be captured with this high data acquisition rate.
The piezo resistive sensor is a small Silicon drum (shown below on top of a pencil) that uses
changes in resistance to measure pressures and temperatures.
www.datacan.ca info@datacan.ca
14
Memory Pressure Gauge
DataCan Piezo Memory
Looking closely at the chip above you can see a pattern that has been created on the top of the
silicon. That pattern is a diffusion layer in the silicon that has been etched away. The diffusion
layer is a semi-conductor which has piezoresistive properties. This means that forces applied to
the semi-conductor will result in a change in resistance of the material. There is a cavity in the
middle of the silicon/glass sandwich and like a balloon, the die collapses under pressure, and
the resistance values of the semi-conductor change.
DataCan’s piezo tools are offered in a variety of packages and with different options. It is
important to understand each design. Critical mechanical package elements include: Outer
Diameter and Battery Pack Size, Sensor Seal (O-Ring or Welded), Carrier Fitting (O-Ring or
Metal to Metal), Battery Housing Seal. As well, each having different packages, DataCan offers
custom boards which include: Pressure Trigger, Fast Sampling (10 samples per second),
Accelerometer Sensor (to measure vibrations downhole), RTD Sensor (for fast temperature
sensing), Smart Battery Technology (you can connect a smart battery to our download cable
and measure its remaining life).
Outer Diameter – Options include 0.50”, 0.75”, 1.25”, and 1.375” OD.
The 0.50” size is a relatively new design and is great for applications with extreme space
restraints. AAA battery packs are used in the 0.50” OD tool, which means the tool can only be
run for a short period of time of 1 week or less.
The 0.75” size is our most economical package and works well for gauge carrier, coiled tubing,
and DST operations. AA battery packs are used in the 0.75” OD tools, which limits the duration
the tool can be “on” downhole, typically no more than 2 to 3 months.
www.datacan.ca info@datacan.ca
15
Memory Pressure Gauge
DataCan Piezo Memory
DataCan now offers four different 0.75” OD packages. The 0.75” classic gauge is characterized
by its o-ring sealed sensor; a very simple and reliable design. When additional memory is
required, the 0.75” gauge with 4 million sample capacity is also available. It has expanded
memory which allows for a high sample rate for an extended period of time.
The 0.75” welded piezo is characterized by its electron beam welded sensor and high pressure
rating. And lastly, the 0.75” piezo with accelerometer is also available. Similar to the classic
gauge but with an accelerometer sensor to measure any vibrations downhole.
The 1.25” gauge has a larger diameter barrel which allows for a large enough battery to run
the gauge for a long duration job. DataCan offers four different 1.25” OD packages. The 1.25”
classic gauge is characterized by its o-ring sealed sensor. The battery pack and housing for this
tool is considered a standard or basic; a good economy tool.
The 1.25” Welded II design is based off the 1.25” Quartz tool platform. Here, the same battery
housing and battery pack is used as the 1.25” Quartz pressure gauge. The Welded II gauge is
characterized by its electron beam welded sensor and high pressure rating. The gauge carrier
connection on the Welded II is a metal autoclave seal. Hence, for high pressures, and for
ported gauge carrier operations, the 1.25” Welded II design is perfect.
The Welded III design is very similar to the 1.25” classic design, but in this case, the sensor is
welded. Over time, DataCan will phase out the original 1.25” and replace it with the Welded III
package.
The 1.25” Welded Piezo RTD design has a RTD sensor for fast temperature sensing. It has a
higher reliability with its shock mounted electronics and electron beam welded pressure sensor.
The 1.375” Welded Piezo IV is our flagship piezo tool. This tool is rugged and robust. It has all
of the best design characteristics in mind. The sensor is welded and available for easy
maintenance. The board is shock mounted for vibration and drops. The “C” sized battery pack
is locking and large enough for long duration jobs. And the three o-rings and metal to metal
seal prevent leaks from entering. This is DataCan’s most robust piezo pressure gauge.
www.datacan.ca info@datacan.ca
16
Memory Pressure Gauge
DataCan 1/2" Piezo
Features
1/4"-20 UNC Pin
Reliability
Simplicity
0.1s Fast Sample Rate Option
Pressure Trigger Option
1 Million Sample Capacity
0.443
Inconel 718 – NACE MR0175
1 X "AAA"
Battery Pack
4.0
www.datacan.ca info@datacan.ca
17
Memory Pressure Gauge
DataCan 3/4" Piezo
GO Connect Socket
2.3
SRO Module
2 X "AA"
Battery Barrel Accessory Type Part No.
Bullnose SS316 100703
1 X "AA" Crossover 0.5-13 UNC SS316 100704
Battery Pack
Crossover 1.0 NPT SS316 101021
3.7 Battery Barrel 1 X "AA" Inconel 718 100702
Battery Barrel 2 x "AA" Inconel 718 100755
Pelican Case Assembly 100756
USB To Serial Converter Assembly 100682
Redress Kit Viton 90 100445
0.750 Redress Kit Aflas 7182B 100446
Redress Kit Chemraz 510 100447
Specifications
Pressure Tem perature
0.9 0.022% F.S. 0.25°C
Accuracy Up To
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
1/2"-13 UNC or
1" NPT Box Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
18
Memory Pressure Gauge
DataCan 3/4" Piezo with 4 Million Sample Capacity
1/2"-13 UNC Pin
0.625
Features
Reliability
2.3 Simplicity
0.1s Fast Sample Rate Option
Pressure Trigger Option
4 Million Sample Capacity
Inconel 718 – NACE MR0175
4.1
1 X "AA"
Battery Pack Accessory Type Part No.
Replaceable SRO Module 150°C 102190
SRO Housing Inconel 718 102191
Bullnose SS316 100703
5.6
Crossover 0.5-13 UNC SS316 100704
Crossover 1.0 NPT SS316 101021
Battery Barrel 1 X "AA" Inconel 718 100702
Battery Barrel 2 x "AA" Inconel 718 100755
Pelican Case Assembly 100756
0.750 USB To Serial Converter Assembly 100682
Redress Kit Viton 90 100445
Redress Kit Aflas 7182B 100446
Redress Kit Chemraz 510 100447
Specifications
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
0.9 Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 4 Million Samples
1/2"-13 UNC or USB
1" NPT Box Com m unication Method
www.datacan.ca info@datacan.ca
19
Memory Pressure Gauge
DataCan 3/4" Welded Piezo
Features
Welded Transducer
Reliability
1/2"-13 UNC Pin Simplicity
1 Million Sample Capacity
Inconel 718 – NACE MR0175
1 X "AA"
Battery Pack
Specifications
0.9 Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
1/2"-13 UNC or Drift < 3 psi / year < 0.1°C / year
1" NPT Box 1 Million Samples
Capacity
Com m unication Method USB
www.datacan.ca info@datacan.ca
20
Memory Pressure Gauge
DataCan 3/4" Piezo Accelerometer
Features
Measures Acceleration
2 X "AA" 0.1s Fast Sample Rate
Battery Barrel
Max Pressure Trigger
Min and Delay Pressure Trigger
2.3
1 X "AA" Delta Pressure Trigger
Battery Pack 1 Million Sample Capacity
Inconel 718 – NACE MR0175
4.1
0.75" OD Piezo Accelerom eter Mem ory Tool - Inconel 718
Pressure Tem perature Acceleration Part No.
750 psi 100°C 101711
1,500 psi 120°C 101712
3,000 psi 101713
6,000 psi Max 3g 101714
10,000 psi Min -3g 101715
125°C
15,000 psi 101716
20,000 psi 101717
25,000 psi 101718
0.625
Accessory Type Part No.
Bullnose SS316 100703
0.75 Crossover 0.5-13 UNC SS316 100704
Crossover 1.0 NPT SS316 101021
3.7 Battery Barrel 1 X "AA" Inconel 718 100702
Battery Barrel 2 x "AA" Inconel 718 100755
Pelican Case Assembly 100756
USB To Serial Converter Assembly 100682
Redress Kit Viton 90 100445
Redress Kit Aflas 7182B 100446
Redress Kit Chemraz 510 100447
Specifications
0.9
Pressure Tem perature Acceleration
Accuracy Up To 0.022% F.S. 0.25°C 0.5% F.S.
Resolution 0.0003% F.S. 0.005°C 0.0003% F.S.
1/2"-13 UNC or Drift < 3 psi / year < 0.1°C / year < 0.1 g / year
1" NPT Box Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
21
Memory Pressure Gauge
DataCan 1 1/4" Piezo
3/4"-16 UNF
Amerada Pin
Features
Reliability
Simplicity
1.063
0.1s Fast Sample Rate Option
Pressure Trigger Option
1 X "C" 1 Million Sample Capacity
2.3 Battery Pack
Inconel 718 – NACE MR0175
1.25
Accessory Type Part No.
Bullnose SS17-4 100488
Crossover 0.75-16 UNF SS17-4 100489
Battery Barrel 1 X "C" Inconel 718 100485
Battery Barrel 2 x "C" Inconel 718 100486
Pelican Case Assembly 100501
USB To Serial Converter Assembly 100682
Redress Kit Viton 90 100911
Redress Kit Aflas 7182B 101002
Redress Kit Chemraz 510 101003
Specifications
1.4 Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
3/4"-16 UNF Amerada Box Com m unication Method USB
www.datacan.ca info@datacan.ca
22
Memory Pressure Gauge
DataCan 1 1/4" Welded Piezo II
3/4"-16 UNF
Amerada Pin
Features
2 X "Sub CC"
Battery Barrel Super Seal Technology
30,000 psi @ 1.25” OD
4.5 Welded Sensor
1 X "Sub CC" Higher Reliability – Shock Mounted Electronics
Battery Pack 0.1s Fast Sample Rate Option
Pressure Trigger Option
1.25
1 Million Sample Capacity
Inconel 718 – NACE MR0175
1.063 Specifications
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
1.4
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
3/4"-16 UNF Com m unication Method USB
Amerada Box
www.datacan.ca info@datacan.ca
23
Memory Pressure Gauge
DataCan 1 1/4" Welded Piezo III
3/4"-16 UNF
Amerada Pin Features
Specifications
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
3/4"-16 UNF Capacity 1 Million Samples
Amerada Box Com m unication Method USB
www.datacan.ca info@datacan.ca
24
Memory Pressure Gauge
DataCan 1 3/8" Welded Piezo
3/4"-16 UNF
Amerada Pin
Features
Specifications
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
3/4"-16 UNF Amerada Box
Com m unication Method USB
www.datacan.ca info@datacan.ca
25
Memory Pressure Gauge
DataCan 1.0" Side Pocket Welded Piezo-Tubing
11/16" - 16 UN Pin
Features
2 X "AA"
Battery Pack 1.00" OD Side Pocket Piezo Mem ory Tool - Inconel 718
Pressure Tem perature Part No.
1,500 psi 120°C 103650
3,000 psi 103651
6,000 psi 103652
150°C
12.3 10,000 psi 103653
15,000 psi 103654
10,000 psi 103655
177°C
15,000 psi 103656
Pressure Specifications
Measurement Port
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
26
Memory Pressure Gauge
DataCan 1.0" Side Pocket Welded Piezo-Annulus
11/16"-16 UN Pin
Features
Inconel 718
1 Million Sample Capacity
High Temperature Reliability
0.1s Fast Sample Rate Option
Pressure Trigger Option
Welded Pressure Sensor
Pressure
Measurement Port
1.0
0.875
Specifications
Pressure Tem perature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
27
Memory Pressure Gauge
DataCan 1 1/2" Side Pocket Piezo Carrier
Elastomeric
Dampner
Holds a 3/4"
Piezo Memory
Gauge
19.6
1.5
www.datacan.ca info@datacan.ca
28
Memory Pressure Gauge
DataCan 1 1/4" Welded Piezo RTD
3/4"-16 UNF
Amerada Pin
Features
1.250
Specifications
Pressure Temperature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
3/4"-16 UNF Capacity 650 000 Samples
Amerada Box Communication Method USB
www.datacan.ca info@datacan.ca
29
Memory Pressure Gauge
DataCan Basic Production Logging Tool
15/16" - 10 UN Pin
1.375
Features
2.3
Pressure
External Fast Response Temperature Probe
Casing Collar Locator
Easy to Use
Welded Sensors
Inconel 718 – NACE MR0175
1 X "CC"
Battery Barrel
1 X "C"
Battery Pack 1.50" OD Basic Production Logging Tool - Inconel 718
Pressure Tem perature Part No.
3,000 psi 105143
150°C
6,000 psi 105144
24.5
10,000 psi 105112
1.50
15,000 psi 177°C 105145
20,000 psi 105146
Specifications
Pressure Tem perature Accelerom eter
Accuracy 0.050% F.S. 0.25°C 0.1 g
Resolution 0.0003% F.S. 0.01°C 0.01 g
Drift < 3 psi / year < 0.1°C / year -
Casing Collar Locator
Detector Type Electromagnetic
Mem ory
Sam ple Rate 0.1 sec to 1.82 hours
Capacity 2 Million Samples
Com m unication USB
www.datacan.ca info@datacan.ca
30
Memory Pressure Gauge
DataCan Mini Production Logging Tool
15/16"-10 UN Pin
Features
1.375
2.3 Pressure
External Fast Response Temperature Probe
Casing Collar Locator
Flowmeter
Easy to Use
Fully Welded Construction
Inconel 718 – NACE MR0175
26.9
1 X "C"
Battery Pack Accessory Type Part No.
Battery Barrel 1 X "C" Inconel 718 105047
Battery Barrel 1 x "CC" Inconel 718 105123
Pelican Case Assembly 105125
Redress Kit Viton 90 105126
Redress Kit Aflas 105127
1.50
Redress Kit Chemraz 105128
Specifications
Pressure Tem perature Accelerom eter
Accuracy 0.050% F.S. 0.25°C 0.1 g
Resolution 0.0003% F.S. 0.01°C 0.01 g
Drift < 3 psi / year < 0.1°C / year -
Casing Collar Locator
Detector Type Electromagnetic
Flow m eter
Minim um Rotation 0 rpm
Maxim um Rotation 8760 rpm
Input 6 Pulses/Revolution
8 ft/min in clear w ater
Threshold
4 ft/min in oil
Max Flow Rate 500 ft/min
Output 6 pulses/revolution
Accuracy 0.02
Resolution 0.125 rps
Mem ory
Sam ple Rate 0.1 sec to 1.82 hours
Capacity 2 Million Samples
Com m unication USB
www.datacan.ca info@datacan.ca
31
Memory Pressure Gauge
DataCan 1 1/4" Burst
Burst Gauge
An ultra fast sampling memory tool called the Burst Tool is now available for sale or rental.
This pressure gauge will capture a perforation event, at a rate of 32,000 samples per second.
Like all DataCan products, the Burst Tool operates using the same simple and easy to use
program and download software as all other DataCan products. A change in sample rate can be
initiated in three ways:
• Delta Pressure Trigger = Change rate after a pre-programmed change in pressure over
time
The gauge has non-volatile memory, so the data will not be lost when you disconnect the
battery pack.
The Burst Tool can store up to 8 high speed sampling events. One high speed event will
capture 500,000 samples, or ~15 seconds of data at the Fast Speed. The Burst Tool can also
store up to 1 million Slow Speed data samples.
www.datacan.ca info@datacan.ca
32
Memory Pressure Gauge
DataCan 1 1/4" Burst
3/4"-16 UNF
Amerada Pin
Features
13.3
www.datacan.ca info@datacan.ca
33
Memory Pressure Gauge
DataCan Geothermal Tool
Geothermal Tool
A geothermal tool has a large Dewar flask housing that insulates the internal, temperature
sensitive components. As well as the insulating housing, the tool assembly has a large internal
heat sink assembly. The insulation, and the internal heat sink work together to prevent and
absorb heat energy. This allows the internal electronics to stay below their critical operating
temperatures.
The following graph illustrates the geothermal tools performance at different external
temperatures.
www.datacan.ca info@datacan.ca
34
Memory Pressure Gauge
DataCan 1 3/4" Geothermal (Flask)
Features
15/16"-10 UNC Pin
8 hours @ 300°C (600°F)
External Fast Response Temperature Probe
Casing Collar Locator
0.1s Fast Sample Rate Option
Pressure Trigger Option
1 Million Sample Capacity
Inconel 718 – NACE MR0175
Flask Performan ce
350
300
250
Tempe rature (C)
200
150
100
External Temp
42.5 Internal Temp
50
0
0 2 4 6 8 10 12 14 16 18
Time (Hours)
Specifications
Pressure Temperature
Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C / year
Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
35
Specialty Items
DataCan 3/4" Inclinometer/Vibration
Features
0.625
1 X "AA"
Battery Pack
4.1
0.75" OD Inclinom eter Mem ory Tool - SS17-4
Tem perature Part No.
150°C 104853
Vibration Specifications
Acceleration Noise < 0.2 g
Sam ple Rate 470 Samples/Second for 1 Second Every Hour
0.750
Com m unication Method USB
www.datacan.ca info@datacan.ca
36
Specialty Items
DataCan Digital Clock
Features
16.5
Digital Clock
Tem perature Rating Torque Part No.
High Speed 102364
150°C
High Torque 103541
High Speed 103540
177°C NEW
High Torque 103542
Specifications
1.1 200 oz-in (1,500mN-m)
Max Drive Torque
Records Time, Motor Current, Temperature
Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca
37
Specialty Items
DataCan Needle Valve Assembly
Features
22.3
The needle valve assembly is pre-programmed to
release pressure at a given time (stored energy)
that will be used to set plugs with no explosives.
GO Connection
1.1875 - 12 UN 2A
1.375
0.650
1.059
1.057
Specifications
Max Drive Torque 200 oz-in (1,500mN-m)
Max Differential Pressure 15,000 psi
Records Time, Motor Current, Temperature
A Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
38
Accessories
DataCan Gauge Carrier
Features
15,000 psi 15,300 psi 198,000 lbs 2-7/8" EUE 2 x 0.75" Gauges 104228
15,000 psi 15,300 psi 198,000 lbs 2-7/8" Premium 2 x 0.75" Gauges 104229
10,150 psi 10,500 psi 202,000 lbs 3-1/2" EUE 2 x 1.25" Gauges 104230
10,150 psi 10,500 psi 202,000 lbs 3-1/2" Premium 2 x 1.25" Gauges 104231
www.datacan.ca info@datacan.ca
39
Accessories
DataCan 1-11/16" Roller Centralizer
8.4
Specifications
OD 1.687" Max
Overall Length 36"
Make Up Length 35"
Centralizing Range 1.7" to 8.4"
Break Direction Up or Dow n
Centralizing Load Capacity 35 lbs
Tensile Breaking Strength 30,000 lbs Min
Working Load 10,000 lbs
www.datacan.ca info@datacan.ca
40
Memory Gauge Accessories
DataCan 1-1/4" Spring Centralizer
1.063 Features
1.25 Specifications
Centralizing Range 1.69" to 8.7"
Load Capacity 30 lbs
Tensile Breaking Strength 45,000 lbs
Amerada Box Thread Type Working Load 30,000 lbs
www.datacan.ca info@datacan.ca
41
Accessories
DataCan Shock Absorbers
Features
Inconel 718
Sour Version 1/2 - 13 UNC 102054
Hastelloy C-276 Springs
www.datacan.ca info@datacan.ca
42
Accessories
DataCan Bomb Well Carriers
See Table for
Pin Thread Type
Features
Elastomer Cushion
(2x)
Sw eet Version
1.375" Piezo 5/8" SR 4' 105647
(4140, SS304)
See Table for Box Thread Type Gauges
www.datacan.ca info@datacan.ca
43
Accessories
DataCan Pressure Verification Assembly
Output
Quartz Reference
Rupture Disc
Specifications
Pressure Tem perature
Reference Transducer w ith
20,000 PSI 85°C
Converter to USB
Dial Gauge 20,000 PSI NA
Tw o-Stage Hand Pum p 40,000/10,000 PSI NA
www.datacan.ca info@datacan.ca
44
Quick Shut-In Tool
DataCan Downhole Instant Close Valve
A downhole shut in tool's purpose is to enable the well-bore to be shut in downhole rather than
at surface. The process of shutting in a well downhole eliminates the “well bore storage
effects”. Well bore storage effects are the result of long lengths of production tubing that need
to be pressurized before the buildup can be recorded. The benefit of using a downhole shut in
tool is to allow for a quicker well build up and better pressure data quality. This saves operators
money on down time, and gives reservoir engineers better data for their calculations.
Instant close - DataCan has a unique valve design that closes instantaneously giving the
production engineer the best available pressure build up data.
Multi cycle - DataCan’s valve has the ability to re-open and close multiple times, this is
necessary when reservoir engineers are performing three or four point isochronal pressure
tests. DataCan’s production and injection valve designs are patented in the United States and
Canada.
High temperature use - Our motor and controls circuit has recently operated in a production
151°C gas condensate well. This well is the highest field temperature DataCan has seen and is
a milestone for shut in tool operations. DataCan can confidently rate its drive section to 150°C.
Further engineering is in progress to raise the operating temperature of the downhole shut in
tool to 165°C and higher.
Shock resistance - The DataCan instant close / multi-cycle downhole shut in tool is highly
durable. Shut in tools are often mounted below locks or plugs. As such, it is necessary that our
valve and drive section are capable of withstanding the most physical of downhole conditions.
Drawdown and build-up tests are often performed on production and injection wells at regular
intervals to monitor the performance of the producing formations in the well. A typical test set-
up usually includes a downhole valve (shut in tool) which is placed in the well and manipulated
by slick line.
www.datacan.ca info@datacan.ca
45
Quick Shut-In Tool
DataCan Downhole Instant Close Valve
There is usually a pressure recording device below the valve which records the pressure
response of the formation being tested as the valve is opened or closed. The formation is
allowed to flow for a sufficient length of time to ensure that it is drawn down to a desired level.
After this draw down period is complete, the shut in valve is used to shut in the well. The
formation pressure is allowed to build up for a sufficient period of time to allow it to reach a
desired level, before another draw down period is started. The entire process is then sometimes
repeated immediately to acquire more pressure data from another drawdown/build-up test.
There are two common sizes of valves, a 1.75” OD valve used for 2-3/8” and 2-7/8” tubing and
a 2.5” OD valve for 3-1/2” and larger tubing. An important aspect of the downhole assembly, is
the connection from the valve to the lock mandrel assembly.
The lock mandrel is set inside the lock, below the lock mandrel is a crossover, below the
crossover is the DataCan valve, below the valve is a set of memory pressure gauges. The
connection from the valve to the lock mandrel assembly is typically performed with a
mechanical equalizing sub. There are two common types of mechanical equalizing subs, a
sliding sleeve or a Kobe knockout type. DataCan recommends using the Kobe knockout type.
In any case, it is important to know the exact size and type of lock mandrel that is going to run
downhole. The mechanical equalizing crossover is customized to attach to each specific type
and size of lock mandrel. There are two common types of lock mandrels, the Otis type, and the
Baker type. In each type, there are a variety of common sizes, each size is determined by the
OD of the mechanical equalizing sub. Typical sizes are (in inches of diameter): 1.781, 1.875,
2.125, 2.188, 2.313, 2.56, 2.75, 2.813, 3.66, 3.81.
DataCan is able to manufacture a custom equalizing sub that will integrate directly into the top
of the valve housing. The DataCan mechanical equalizing solution means that your crossover
solution will have at least one less potential leak path. DataCan highly recommends using an
integrated mechanical equalizing sub to connect the downhole shut in tool to the lock mandrel.
www.datacan.ca info@datacan.ca
46
Quick Shut-In Tool
DataCan 2 3/8" Production Valve
Features
8X 0.425
11.8
Quick Port
1.75
Specifications
Closing Tim e Instantaneous
Valve Flow Area 1.135 in² (7.3 cm²)
Lock Mandrel Flow Area 1.00 in² (6.5 cm²)
Max External Pressure 15,000 psi (1,000 bar)
Max Differential Pressure 10,000 psi (700 bar)
Max Tem perature 350°F (177°C)
Universal Drive Section
Attachment Pow er Source 3 "D" Cell Battery Pack (11.0 Volts, 10.0Ahr)
Comm unication Method USB
www.datacan.ca info@datacan.ca
47
Quick Shut-In Tool
DataCan 3 1/2" Production Valve
Features
Instant Close Time
Multiple Cycle Capability
Metal to Metal Seals
Eliminates Wellbore Storage Effect
Modular Design
10x 0.563
Quick Port
12.6
2.5
Specifications
Closing Tim e Instantaneous
Valve Flow Area 2.50 in² (16.1 cm²)
Lock Mandrel Flow Area 2.40 in² (15.5 cm²)
Max External Pressure 16,000 psi (1,100 bar)
Max Differential Pressure 10,000 psi (700 bar)
Max Tem perature 350°F (177°C)
Pow er Source 3 "D" Cell Battery Pack (11.0 Volts, 10.0Ahr)
Universal Drive Section Com m unication Method USB
Attachment
www.datacan.ca info@datacan.ca
48
Quick Shut-In Tool
DataCan 4 1/2" Production Valve
Features
Instant Close Time
Multiple Cycle Capability
Metal to Metal Seals
Eliminates Wellbore Storage Effect
3.125
Modular Design
10x 0.79
13.7
Quick Port
3.5
Specifications
Closing Tim e Instantaneous
Valve Flow Area 4.90 in² (31.6 cm²)
Lock Mandrel Flow Area 4.90 in² (31.6 cm²)
Max External Pressure 10,000 psi (690 bar)
Max Differential Pressure 6,000 psi (410 bar)
Max Tem perature 350°F (177°C)
Universal Drive Section Pow er Source 3 "D" Cell Battery Pack (11.0 Volts, 10.0Ahr)
Attachment
Com m unication Method USB
www.datacan.ca info@datacan.ca
49
Quick Shut-In Tool
DataCan 7" Production Valve
Features
Instant Close Time
Multiple Cycle Capability
Metal to Metal Seals
Eliminates Wellbore Storage Effect
Modular Design
15x 0.79
Quick Port
14.4
5.0
2.25
Accessory Type Part No.
Pelican Case Assembly 104249
Redress Kit Viton 90 104246
Redress Kit Aflas 7182B 104247
Redress Kit Chemraz 510 104248
Specifications
Closing Tim e Instantaneous
Universal Drive Valve Flow Area 7.35 in² (47.4 cm²)
Section Attachment
Lock Mandrel Flow Area 7.35 in² (47.4 cm²)
Max External Pressure 7,000 psi (483 bar)
Max Differential Pressure 2,500 psi (170 bar)
Max Tem perature 350°F (177°C)
Pow er Source 3 "D" Cell Battery Pack (11.0 Volts, 10.0Ahr)
Com m unication Method USB
www.datacan.ca info@datacan.ca
50
Quick Shut-In Tool
DataCan Universal Drive
Features
23.5
Specifications
Max External Pressure 16,000 psi (1,000 bar)
Max Drive Torque 200 oz-in (1500mN-m)
5/8" SR or Records Time, Motor Current, Temperature
15/16"-10 UNC
Box Connection Capacity 1 Million Samples
Com m unication Method USB
www.datacan.ca info@datacan.ca
51
Accessories
DataCan Battery Pack Information
DataCan’s high temperature battery packs use Lithium Sulfuryl Chloride or Lithium Thionyl
Chloride cells. There are numerous battery sizes, temperature ratings, and rate capacities. In
most cases, the customer tool type and maximum downhole temperature will dictate the
battery pack required. Refer to DataCan’s battery brochure page to match your tool with its
correct battery pack.
Battery pack life is critical. Measuring the voltage of a lithium battery pack will not help you
determine its remaining life. The voltage discharge curve of a Lithium cell is very flat. Hence,
when you measure the voltage of a lithium battery pack, you are not confident in knowing how
much life remains in the battery cells.
The voltage of a lithium battery pack will be “acceptable” until the very end of its life. At the
end of its life, a lithium battery cell suddenly loses its available energy.
www.datacan.ca info@datacan.ca
52
Accessories
DataCan Battery Pack Information
The most common question DataCan receives is, “How long will the battery pack last
downhole?” To correctly answer this question you need to know the following:
What battery pack are you using, or more specifically, how much energy do you have
available? Different battery packs have different amounts of available energy. All of DataCan’s
new battery packs have their available energy printed on the label (highlighted in yellow
below).
Lithium Battery
P/N 100808
S/N 0023 June 11, 2011
OCV 3.67V 3.3 g Lithium
Temp Range -40 °C to 150°C 9.0 Ah
WARNING: Fire, Explosion and Severe
burn hazard.Do Not Recharge, Disassemble
or Heat Above 150°C.
Made in Canada
For used battery packs, the customer must manually record how much energy has been used
during previous jobs. Alternatively, DataCan has a “Smart Battery” pack design which saves its
own energy usage and its remaining energy can be downloaded by the customer.
What type of tool? Different tools use different amounts of energy as they sleep and sample.
What sample rate? DataCan’s tools use more battery energy while they are recording samples.
In the case of the downhole shut in tool, relatively no energy is being used unless the motor is
on.
What is the expected downhole temperature? This is critical as battery packs have significant
levels of self discharge at temperature.
Once the above criteria are known, users can input this information in DataCan’s “Battery
Calculator”. The Battery Calculator program can be found in DataCan’s program and download
software under the “Utilities” tab.
www.datacan.ca info@datacan.ca
53
Accessories
DataCan Battery Pack Information
It is important for users to also understand the concept of battery pack passivation. Battery
cells contain two main chemicals: the anode, and the cathode. To increase shelf life, a thin
layer of corrosion builds up between the anode and cathode. This thin layer is called the
“passivation” layer. The passivation layer prevents the anode and cathode from reacting
prematurely.
However, in some cases (especially in higher temperature cells) the passivation layer grows too
large and can prevent the battery from operating correctly. The passivation can restrict the
chemical reaction between the anode and cathode to the point where the cells appears to be
dead. The solution is to depassivate the cell (remove the passivation layer). To depassivate the
cell you can:
Put a large current draw on the battery. A large current draw will act to erode the passivation
layer.
Vibrate the cell. Physical shock will help to displace the passivation layer.
Heating the cell will also help to melt the passivation layer (heat is a common catalyst to any
reaction).
www.datacan.ca info@datacan.ca
54
Accessories
DataCan Battery Packs
55
www.datacan.ca info@datacan.ca
Accessories
DataCan Battery Packs
1 X "Sub CC"
Threaded Locking
4 Pin Lemo
3 X "C"
4 Pin Amphinol
2 X "D"
Logger Battery Pack
56
www.datacan.ca info@datacan.ca
Accessories
DataCan Smart Battery Packs
Smart Battery
A Smart Battery option allows customers to plug a DataCan smart battery pack into a USB
download cable and determine its remaining life.
The smart battery packs have built in memory chips that record the energy that has been used
during the operation of the tool.
Our standard software will give the operators a simple report on the available life of the battery
pack.
www.datacan.ca info@datacan.ca
57
Accessories
DataCan NEW Smart Battery Packs
1 X "C"
6 Pin Lemo
These new “smart battery packs” record the current draw from
each lithium battery cell and give users an accurate
measurement of the battery packs remaining life.
1 X "Sub CC"
Threaded Locking
6 Pin Lemo
1 X "C"
Threaded Locking C - 6 Pin Lem o Connector
6 Pin Lemo Size Max Tem p Volts Ahr Part No. Products
C 150ºC 6.0 102056
3.6 1-1/4" Piezo (Standard, RTD, Welded III)
2XC 150ºC 12.0 102060
58
www.datacan.ca info@datacan.ca
Accessories
DataCan Battery Tester
Features
Simplicity
Check Battery Voltage
Depassivate Lithium Cells
Battery Tester
Connector Part No.
4 Pin Lemo 100876
4 Pin Military 100887
www.datacan.ca info@datacan.ca
59
Accessories
DataCan O-Ring Information
O-Ring Information
If your job is critical, DataCan recommends using an Aflas 7182B® material. This material is
great for H2S, CO2, and high pressure conditions. The cost of a failure due to a poor o-ring
selection is too great.
For an o-ring to seal properly, it must have chemical and mechanical strength. The material
must be chemically compatible with the sealing fluid. The gland and o-ring must be tough
enough to maintain the seal during high pressures and high temperatures.
Chemical strength means matching the material to the environment. DataCan has a simplified
o-ring selection guide that helps operators choose the correct material. In general, Viton 90 o-
rings work most of the time. For critical wells, long term surveys, and unknown environments,
DataCan recommends using Aflas 7182B® seals.
The physical strength of a seal is dependent on the o-ring strength and the gland design.
Commonly, an o-ring will have an extrusion failure at high pressures and temperatures. This is
because the high pressure squeezes the o-ring through the gap in the seal joint. An easy
solution to this problem is to reduce the gap size. The smaller the gap, the higher pressure the
seal can withstand before extruding. However, it becomes difficult to machine small gaps.
Another solution, is to use a high strength back-up, such as a PEEK® back-up. The back-up
must extrude through the seal gap. Since the back-up material is stronger than the o-ring,
higher pressures can be withstood. The final solution is to use a face seal joint design, as seen
in DataCan’s super seal. In the super seal design, a metal to metal face seal behind the o-ring
gland prevents the o-ring from extrusion failures.
The premature failure of an o-ring can usually be attributed to a combination of causes and not
merely a single failure mode. It is important to maximize sealing life and reliability by reducing
the probability of seal failure at the onset with proper compound selection, installation and
continued education of personnel.
www.datacan.ca info@datacan.ca
60
Accessories
DataCan O-Ring Information
High modulus or a harder elastomer, as well as a slower decompression rate will prevent this
mode of failure. Aflas 7182B is explosion decompression resistant. It is an effective seal
material for high CO2 gas wells.
www.datacan.ca info@datacan.ca
61
Accessories
DataCan O-Rings, Back-Ups Redress Kits
Material Properties
Property Viton Aflas Chem raz
Low Temp Duty -10°C 30°C 0°C
High Temp Duty 200°C 220°C 230°C
Carbon Dioxide Fair Good Good
H2S Poor Fair Good
Tear/Abrasion Resistance Good Fair Fair
Compression Set Resistance Good Fair Poor
62
www.datacan.ca info@datacan.ca
Surface Testing Suite
DataCan Logging Information
DataCan’s surface logging suite is built around our surface pressure or temperature
transmitter. The transmitters are fully welded designs that have been calibrated. The
transmitters (or smart sensors) can be packaged into a variety of different configurations to
meet specific customer needs. DataCan offers a: Digital Chart Recorder, Wellhead Logger, and
a new Multi-Channel Surface Logger.
Any pressure or temperature transmitter can be turned into a digital chart recorder. Chart
recorder software is loaded onto a laptop, and a special USB cable is attached directly to the
transmitter. The Cable can be up to 100 feet long, and is oil resistant. The chart recorder
software is very easy to use. One button for stop and one for go. You can toggle between the
classic spiral and a standard x-y graph. The laptop continuously stores data to a user
determined text file which can be e-mailed or viewed at any time. This digital chart recorder
solution is great for customers who do not want to store and file physical Barton charts.
Multiple transmitters can be operating and running at one time.
If you can’t have a laptop on location, but you want to record data and have a display. Then
we suggest using our Wellhead Logger. This product is the combination of a pressure or
temperature transmitter, a digital display, memory, and a large “2 x D” battery pack, all
packaged in an explosion proof housing. The wellhead logger is a classic product that is easy
to use. Like all surface products, the smart sensor is fully welded. A single button is used to
turn the device on and off. A lemo connection allows operators to program and download the
wellhead logger using our standard DataCan gauge software. The wellhead logger can come
with an antenna, which will send data to a laptop via radio frequency.
The Surface Logger is the second generation wellhead logger. The surface logger gives users
much more flexibility when designing a surface testing suite. The surface logger has all of the
features of the wellhead logger, but you can now add multiple transmitters to one data logger.
The enclosure was redesigned to meet our specific packaging needs. Up to 3 additional wired,
and 4 additional wireless transmitters can be connected to the device at a single time.
www.datacan.ca info@datacan.ca
63
Surface Testing Suite
Single Channel Wellhead Logger
Electron Beam
Welded No O-Rings
www.datacan.ca info@datacan.ca
64
Surface Testing Suite
DataCan Quartz Wellhead Logger
Features
Wellhead Logger
Pressure Tem perature Com m unication Part No.
5,000 psi 104401
10,000 psi 104402
USB Only
20,000 psi 104403
30,000 psi 104404
-40°C to 85° C
5,000 psi 104405
10,000 psi 104406
USB & Radio
20,000 psi 104407
30,000 psi 104408
Optional External
Connections Specifications
Pressure Tem perature
Accuracy Up To 0.020% F.S. 1.0°C
Resolution (scales directly w ith gatetim e) <0.012 psi/sec <0.005°C/sec
Drift Negligible Negligible
Capacity 1 Million Samples
www.datacan.ca info@datacan.ca
65
Surface Testing Suite
DataCan Multi-Channel Logger
• Up to 4 Channels
• 100m Wireless radio communication option (which has a key lock function)
• ModBUS output option
• 20 Million samples of memory
• Up to 3 years of battery life
The multi-channel logger comes in a variety of options. You need to choose the major pressure
channel, which is built into the logger (shown in the base). You also need to choose if you want
the radio option or not. The radio option allows you to download and program the device from a
distance of up to 100m (300ft). You can also choose to connect three additional wired pressure
or temperature transmitters to the main logging unit. You need to specify the cable length and
transmitter type.
www.datacan.ca info@datacan.ca
66
Surface Testing Suite
DataCan Multi-Channel Surface Logger
Features
Extreme Service Reliability
Explosion-Proof Instrument Housing
-30°C to 80°C Temperature Range
20 Million Sample Capacity
High Pressure Connections
Battery Life Up to 3 Years
Wireless Capability
RS-485 ModBus Connection
Connect up to 3 External Devices
Easy to use Software for Programming
& Data Analysis
www.datacan.ca info@datacan.ca
67
Surface Testing Suite
DataCan Quartz Multi-Channel Logger
Features
Specifications
Pressure Tem perature
Accuracy Up To 0.020% F.S. 1.0°C
Resolution (scales directly w ith gatetim e) <0.012 psi/sec <0.005°C/sec
Drift Negligible Negligible
Capacity 1 Million Samples
www.datacan.ca info@datacan.ca
68
Surface Testing Suite
DataCan Digital Chart Recorder
Features
Specifications
Pressure Tem perature
Accuracy Up To 0.03% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C/year
Com m unication Method USB
www.datacan.ca info@datacan.ca
69
Surface Testing Suite
DataCan 1 1/4" Pressure Transmitter
1.25
4.38
www.datacan.ca info@datacan.ca
70
Surface Testing Suite
DataCan Quartz Pressure Transmitter
1.62
3.13
0.5 0.875
Specifications
Pressure Tem perature
Accuracy Up To 0.020% F.S. 1.0°C
Resolution (scales directly w ith gatew ay) <0.12 psi/sec <0.005°C/sec
Drift Negligible Negligible
Comm unication Method RS-485 ModBus
www.datacan.ca info@datacan.ca
71
Surface Testing Suite
DataCan 1 1/4" Temperature Transmitter
Military Connector
Features
1.25
1.063
1/2" NPT
Specifications
Accuracy Up To 0.2°C
Resolution 0.005°C
Drift <0.1°C/year
Com m unication Method RS485 Modbus
www.datacan.ca info@datacan.ca
72
Surface Testing Suite
DataCan 1 1/4" Wireless Pressure Transmitter
Features
Zigbee Antenna
Specifications
Pressure Tem perature
Removable Connection Adapter Accuracy Up To 0.022% F.S. 0.25°C
Resolution 0.0003% F.S. 0.005°C
Drift < 3 psi / year < 0.1°C/year
Com m unication Method Radio
Wireless Range Up to 100m
www.datacan.ca info@datacan.ca
73
Surface Testing Suite
DataCan 1 1/4" Wireless Temperature Transmitter
Features
1/2" NPT
Specifications
Accuracy Up To 0.25°C
Resolution 0.005°C
Drift <0.1°C/year
Com m unication Method Radio
Wireless Range Up to 100m
www.datacan.ca info@datacan.ca
74
Product Catalog
75