Professional Documents
Culture Documents
General Specifications: Model AVR10D Duplexed V Net Router
General Specifications: Model AVR10D Duplexed V Net Router
General
Specifications
Model AVR10D
Duplexed V net Router R3
GS 33P06H10-31E
■ GENERAL
These Bus Converters connect CENTUM CS 3000
Human Interface Stations (HISes) on the Vnet/IP to
CENTUM CS 3000/CENTUM CS stations on the V net,
CENTUM CS 1000 stations on the VL net in other
domain.
To connect to CENTUM CS System, LHS4450 Multiple
Project Connection Package and LHS5450 Multiple
Project Connection Builder are required. To connect to
CENTUM CS 1000 System, an Ethernet, as well as these
packages, is also required.
■ HARDWARE SPECIFICATIONS
For the installation specifications and environmental
conditions that are common to the systems, refer to
“Integrated Production Control System CENTUM CS 3000
System Overview (Vnet/IP Edition) (GS 33P01B10-31E).”
F01E.EPS
Communication on the Vnet/IP Side
Communication Speed: 100 Mbps, Full Duplex
Power Supply
Connection: CAT5e cable, UTP
(Specify with Suffix Code)
Transmission: 100Base-TX compliance
Voltage: 100-120 V AC, Frequency: 50/60 Hz
Connector: RJ45 connector
Voltage: 220-240 V AC, Frequency: 50/60 Hz
Max. distance: 100 m (Distance between AVR10D and
Voltage: 24 V DC
Layer 2 switch)
Power Consumption
Communication on the V net Side
100-120 V AC: 80 VA
Communication Speed: 10 Mbps
220-240 V AC: 110 VA
Connection: Coaxial cable, BNC type
24 V DC: 1.7 A
Dual-redundant or single
Power supply method dual-line or single power line
For CENTUM CS 3000 and CENTUM CS
Weight
Communication on the VL net Side
Approx. 6.0 kg
Communication Speed: 10 Mbps
Connection: Coaxial cable, BNC type Regulatory Compliance
Dual-redundant or single For the detailed information of following standards, see
For CENTUM CS 1000 "System Overview (Vnet/IP Edition) (GS 33P01B10-31E)."
Configuration Safety Standards
Nest [CSA] (for 100-120 V AC and 24 V DC power
supply)
Mounting
[CE Mark] (for 220-240 V AC and 24 V DC power
19-inch Rack Mounting:
supply)
Rack mount (4 x M5 screws)
EMC Conformity Standards
Insulation bush (accessory)
[CE Mark] (for 220-240 V AC and 24 V DC power
Connection supply)
Power Supply: M4 screw terminal connection [C-Tick Mark](for 220-240 V AC and 24 V DC power
Grounding: M4 screw terminal connection supply)
Contact Output: M4 screw terminal connection
V net and VL net Side: T-junction BNC connection
Vnet/IP Side: CAT5e (Enhanced Category 5)
150.6
482.6 169
8.75 465.1 110 20
21.3 440
132.5
57.1
37.7
Hold for 19" rack mounting
(4 M5 screw holes)
F02E.EPS
■ ORDERING INSTRUCTIONS
Specify model and suffix codes.
■ TRADEMARK
• CENTUM is a registered trademark of Yokogawa Electric Corporation.
• Ethernet is a registered trademark of XEROX Corpoation.
• Other company and product names appearing in this document are trademarks or registered trademarks of their respective
holders.
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation GS 33P06H10-31E Apr.1,2005-00
Subject to change without notice.