Professional Documents
Culture Documents
Detailed Lesson Plan in Grade 9 - Drafting - Alphabet of Lines
Detailed Lesson Plan in Grade 9 - Drafting - Alphabet of Lines
III. Procedure:
B. Motivation
Show a drawing plate with applied alphabet of
lines.
- What do you observe in the drawing - I observe that
plates? there are
lines, labels,
numbers and
the object.
C. Lesson Proper
a. Activity
- The students will be grouped into 4 to have
a race in matching the image of the
alphabet of lines through the given names
and definitions.
b. Analysis
- What alphabet of lines is used in to indicate - Dimension line
the measurement?
- What alphabet of lines is used in making a - Border line
drawing paper?
- Also known as object line represents the - Visible outline
visible edges of an object?
- What is composed of small or short dashes - Hidden line
about 3-4 millimeters long with gaps
between dashes, each about 1-2
millimeters wide?
- The lightest or finest line in a drawing. - Center line
- Also know extension line, is slightly heavier - Projection line
than a center line and is composed of long
equal dashes about 7 millimeters to 4
centimeters long and with gaps of about 1-
2 millimeters.
- What alphabet of lines is a fine broken line - Leader line
with an arrowhead at one end?
- It is irregular fine, curved line with an - Reference line
arrowhead the end?
- What alphabet of lines is a long break line? - Limiting line
The thickness of this line is about half that
of the visible line.
c. Abstraction
- What are the alphabet of lines and their - In sketching
uses? orthographic
drawings,
certain
conventional
lines, each for
a definite
purpose, are
used. This line
are commonly
called
alphabet of
lines.
d. Application
Let the students draw using the different
alphabet of lines.
Rubrics
Accuracy 50%
Cleanliness 40%
Timeliness 10%
Total 100%
D. Evaluation
Part I. Identify the following alphabet of lines.
_______1. It is considered the lightest or finest
line in a drawing.
_______2. It is used to indicate the
measurements of object.
_______3. It is generally the heaviest or
darkest lines in a drawing.
_______4. It is a long break.
_______5. It is a fine broken line with an
arrowhead at one end.
COLUMN A COLUMN B
1. Hidden Line
2. Border Line5.
3. Leader Line
4. Reference Line
5. Limiting Line
7. Center Line
8. Visible Line
9. Dimension Line
E. Homework
Research a procedure on how to applying
alphabet lines in AUTO CAD.
Prepared by:
Pre-service Teacher
Checked by:
Subject instructor