Professional Documents
Culture Documents
Dve.023.002 Plain Bearing Components
Dve.023.002 Plain Bearing Components
“D” STYLE
Note: MDL “D” Style Plain Bearing Components are designed to be interchangeable
with Plain Bearing Components from “Danly/IEM” of the same size and type.
“Danly/IEM” is a registered trademark of Connell Limited Partnership. MDL Mold & Die Components, Inc.
is not connected, in any way, to Danly/IEM or Connell Limited Partnership.
Inch Index
2
Metric Index
3
Straight Guide Posts
LOW PROFILE
BUSHINGS
SHORT SHOULDER
BUSHINGS
SHOULDER
BUSHINGS
Assembly
CAUTION:
4
Straight Guide Posts P16.DDD.LLL
5
Demountable Guide Posts
LOW PROFILE
BUSHINGS
SHORT SHOULDER
BUSHINGS
SHOULDER
BUSHINGS
Assembly
Shoulder face and fit end are ground in the same
operation to guarantee the perpendicularity of
Demountable Guide Posts.
CAUTION:
When using Demountable Guide Posts, dimension
T should be checked to avoid interference with
shoulder of bushing at minimum shut height with
tool life depleted.
6
Demountable Guide Posts P36.DDD.FFF
F CATALOG NUMBER
2.50 P36.008.010
2.75 P36.008.011 P36.010.011 P36.012.011
3.00 P36.008.012 P36.010.012 P36.012.012
3.25 P36.008.013 P36.010.013 P36.012.013
3.50 P36.008.014 P36.010.014 P36.012.014 P36.014.014 P36.016.014
3.75 P36.008.015 P36.010.015 P36.012.015
4.00 P36.008.016 P36.010.016 P36.012.016 P36.014.016 P36.016.016
4.25 P36.008.017 P36.010.017 P36.012.017
4.50 P36.008.018 P36.014.018 P36.016.018 P36.020.018 P36.024.018
4.75 P36.010.019 P36.012.019
5.00 P36.008.020 P36.014.020 P36.016.020 P36.020.020 P36.024.020
5.25 P36.010.021 P36.012.021
5.50 P36.008.022 P36.014.022 P36.016.022 P36.020.022 P36.024.022
5.75 P36.010.023 P36.012.023
6.00 P36.008.024 P36.014.024 P36.016.024
6.25 P36.010.025 P36.012.025
6.50 P36.008.026 P36.014.026 P36.016.026 P36.020.026 P36.024.026
6.75 P36.010.027 P36.012.027
7.00 P36.008.028
7.25 P36.010.029 P36.012.029
7.50 P36. 008.030 P36.014.030 P36.016.030 P36.020.030 P36.024.030
8.25 P36.010.033 P36.012.033
8.50 P36.014.034 P36.016.034 P36.020.034 P36.024.034
9.25 P36.010.037 P36.012.037
9.50 P36.014.038 P36.016.038 P36.020.038 P36.024.038
10.25 P36.010.041 P36.012.041
10.50 P36.014.042 P36.016.042 P36.020.042 P36.024.042
11.50 P36.014.046 P36.016.046
13.50 P36.020.054 P36.024.054
14.50 P36.016.058
16.50 P36.020.066 P36.024.066
17.50 P36.016.070
D3 1 5/16 1 9/16 1 7/8 2 1/4 2 1/ 2 3 1/32 3 1/2
E 1.1875 1.4375 1.6875 1.9375 2.4375
m 0.2756
M 13/16 63/64 1 1/8 1 19/64 1 27/64 1 43/64 1 59/64
N 1.1436 1.4247 1.5622 1.7309 1.8540 2.1009 2.3484
Q1 0.8210 0.9660 1.0363
1.4251 1.5135 1.6903 1.8671
Q2 1.1090 1.3602 1.4820
T 0.606 0.708
CLAMPS B01.006.000 B01.008.000
A25.008.006 A25.010.006
SCREWS
(1/4 - 20 x 3/4) (5/16 - 18 X 3/4)
QTY. 3 4
7
Demountable Shoulder Bushings
SHORT SHOULDER
BUSHINGS
STRAIGHT
GUIDE POSTS
Clamp Arrangements
SHOULDER
BUSHINGS
DEMOUNTABLE
GUIDE POSTS
Component Parts
Supplied MDL Demountable Steel Bushings feature bearing
quality alloy steel, case hardened. ID is precision
ground and hone assuring interchangeability with
Guide Posts.
8
STEEL
B16.DDD.FFF
Demountable Shoulder Bushings
BRONZE PLATED
B26.DDD.FFF
9
STEEL
B18.DDD.FFF
Low Profile Bushings
BRONZE PLATED
B28.DDD.FFF
To Be Use With: Examples
STRAIGHT
GUIDE POSTS
Component Parts Supplied
Clamp Arrangements
or
F CATALOG NUMBER
0.5 B18.008.008 B18.010.008 B18.012.008 B18.014.008 B18.016.008 B18.020.008
(1/2) B28.008.008 B28.010.008 B28.012.008 B28.014.008 B28.016.008 B28.020.008
E 0.875 1.875 2.375 2.625
L 1.375 2.375 2.875 3.125
D2 1 1/2 1 3/4 2 2 1/4 2 1/2 3
D3 1.593 1.843 2.062 2.312 2.625 3.062
D4 1.845 2.095 2.345 2.658 3.064 3.814
M 1 1/16 1 3/16 1 29/64 1 39/64 1 25/32 2 9/64
N 1.3303 1.4533 1.8042 1.9576 2.1275 2.4818
Q1 0.8698 0.9323 1.1953 1.2735 1.3598 1.5391
Q2 1.2565 1.3648 1.7109 1.8463 1.9958 2.3063
T 0.562 0.461
X 0.2500 0.6874 0.9374 1.0622
CLAMPS B01.006.001 B02.008.001
A25.008.005 A25.010.004
SCREWS
(1/4 - 20 X 5/8) (5/16 - 18 X 1/2)
QTY. 3 4
10
Bore Sizes Recommendations
11
Component Parts
LUBRICATION
CLAMPS
FITTING
12
Demountable Steel Bosses
MDL Demountable Steel Bosses are manufactured with mild carbon steel to be use with Guide Posts
and or Demountable bushings.
They are available in two shapes (Round and Square) and different heights to meet the requirements
of Special Die Sets.
The unique design of those Bosses allows them to be interchangeable and do not require the use
of Dowel Pins for their assembly. Those bosses may be disassembly for tool grinding.
If required, those bosses could be welded to the Die Set after assembly.
The locating diameter on the Bosses for Guide Posts and Demountable Bushings is the same.
This allows the two plates of the Die Set to be machined together in a single setup.
13
X15.DDD.FFF
Demountable Round Steel Bosses
X16.DDD.FFF
1.5 X15.010.024
2.0 X15.010.032
2.5 X15.012.040
1.5 X16.010.024
2.0 X16.010.032
2.5 X16.012.040
DIMENSIONAL DATA
E 0.625
14
X17.DDD.FFF
Demountable Square Steel Bosses
X18.DDD.FFF
1.5 X17.010.024
2.0 X17.010.032
2.5 X17.012.040
1.5 X18.010.024
2.0 X18.010.032
2.5 X18.012.040
DIMENSIONAL DATA
E 0.625
15
Straight Guide Posts
LOW PROFILE
BUSHINGS
SHORT SHOULDER
BUSHINGS
SHOULDER
BUSHINGS
LONG SHOULDER
BUSHINGS
Assembly
MDL Straigth and Demountable Guide Posts
feature bearing quality alloy steel, case
hardened, precision ground with a surface
finish better than Ra = 0,5 µm that assures
long working life of Die Sets components.
CAUTION:
16
Straight Guide Posts P10.DDD.LLL
D1 20 25 32 40 50 63 80
L CATALOG NUMBER
500 P10.080.500
17
Demountable Guide Posts
Locked by Clamp
LOW PROFILE
BUSHINGS
SHORT SHOULDER
BUSHINGS
SHOULDER
BUSHINGS
LONG SHOULDER
BUSHINGS
Assembly
Shoulder face and fit end are ground in the same
operation to guarantee the perpendicularity of
Demountable Guide Posts.
CAUTION:
When using Demountable Guide Posts Locked by
Clamp, dimension T should be checked to avoid
interference with shoulder of bushing at minimum
shut height with tool life depleted.
18
Demountable Guide Posts
Locked by Clamp P21.DDD.FFF
D1 20 25 32 40 50 63 80
F CATALOG NUMBER
80 P21.020.080 P21.025.080
90 P21.020.090 P21.025.090
500 P21.080.500
D3 25 32 40 50 63 76 93
E 20 25 32 40 45 50 60
QTY. 3 4
19
Demountable Guide Posts
Locked by Retainer Plug
LOW PROFILE
BUSHINGS
SHORT SHOULDER
BUSHINGS
SHOULDER
BUSHINGS
LONG SHOULDER
BUSHINGS
Assembly
CAUTION:
20
Demountable Guide Posts
P22.DDD.FFF
Locked by Retainer Plug
D1 20 25 32 40 50 63 80
F CATALOG NUMBER
80 P22.020.080 P22.025.080
90 P22.020.090 P22.025.090
500 P22.080.500
D3 = D4 25 32 40 50 63 76 93
D4 25 32 40 50 63 76 93
D5 19 24 30 38 48 63 80
E 20 25 32 40 45 50 60
a 3,3 5,0
C min. 28 35 45 56 64 75 91
h 3,3 5,0
21
Demountable Shoulder Bushings
SHORT SHOULDER
BUSHINGS
STRAIGHT
GUIDE POSTS
SHOULDER
BUSHINGS
Clamp Arragements
DEMOUNTABLE
GUIDE POSTS
Component Parts
LONG SHOULDER Supplied MDL Demountable Steel Bushings feature bearing
BUSHINGS
quality alloy steel, case hardened. ID is precision
ground and hone assuring interchangeability with
Guide Posts.
22
STEEL
B11.DDD.FFF
Demountable Shoulder Bushings
BRONZE PLATED
B21.DDD.FFF
D1 20 25 32 40 50 63 80
B11.020.016
16
B21.020.016
F SHOULDER BUSHINGS
B11.020.032
32
B21.020.032
DIMENSIONAL DATA
D2 28 38 45 54 65 81 100
D3 29 42 49 58 70 88 110
E 18 22 25 30 35 48
QTY. 2 3 4
23
STEEL
B13.DDD.FFF
Low Profile Bushings
BRONZE PLATED
B23.DDD.FFF
To Be Use With: Examples
STRAIGHT
GUIDE POSTS
Component Parts Supplied
Clamp Arrangements
or
D1 20 25 32 40 50 63 80
F CATALOG NUMBER
B13.020.010 B13.025.010 B13.032.010
10
B23.020.010 B23.025.010 B23.032.010
B13.040.014 B13.050.014 B13.063.014 B13.080.014
14
B23.040.014 B23.050.014 B23.063.014 B23.080.014
E 18 23 30 38 48 61 78
L 33 40 52 62 75 92
28
D2 38 45 54 65 81 100
D3 29 36 43 50 64 79 99
D4 32,5 47,0 54,0 63,0 75,0 93,0 115,0
M 19,5 30,0 33,5 40,0 46,0 55,0 66,0
N 26,3 38,6 42,0 52,0 57,9 66,8 77,7
Q1 - 25,2 27,0 33,7 36,7 41,2 46,7
Q2 - 36,4 39,5 49,0 54,2 61,9 71,5
T 11,3 10,2 13,2
X 6 10 20 32
CLAMPS B01.005.000 B02.006.000 B02.008.000
A05.005.012 A05.006.012 A05.008.016
SCREWS
(M5 X 12) (M6 X 12) (M8 X 16)
QTY. 2 3 4
24
Bore Sizes Recommendations
D1 20 25 32 40 50 63 80
D1 20 25 32 40 50 63 80
D1 20 25 32 40 50 63 80
D2 26 33 41 51 64 77 94
19,976 24,976 31,971 39,971 49,971 62,965 79,963
D 19,963 24,963 31,955 39,955 49,955 62,946 79,944
D1 20 25 32 40 50 63 80
D2 28 38 45 54 65 81 100
28,000 38,000 45,000 54,000 65,000 81,000 100,000
D 28,013 38,016 45,016 54,019 65,019 81,022 100,022
D1 20 25 32 40 50 63 80
D2 28 38 45 54 65 81 100
28,000 38,000 45,000 54,000 65,000 81,000 100,000
D 28,013 38,016 45,016 54,019 65,019 81,022 100,022
D1 32 40 50 63 80
D2 54 65 81 100 118
54,000 65,000 81,000 100,000 118,000
D 54,019 65,019 81,022 100,022 118,022
25
Component Parts
LUBRICATION
CLAMPS
FITTING
RETAINER PLUGS
Post Dia. 20 25 32 40 50 63 80
Cat. Nº P02.020.000 P02.025.000 P02.032.000 P02.040.000 P02.050.000 P02.063.000 P02.080.000
D1 5,6 6,8 8,8 10,8 12,8 17,0 21,0
D2 9,7 11,2 14,2 17,2 19,2 25,5 31,5
D3 19 24 30 38 48 63 80
D4 25 32 40 50 63 76 93
a 3,3 5,0
26
Assembly Options for MDL
Guiding Components
27
Demountable Steel Bosses
MDL Demountable Steel Bosses are manufactured with mild carbon steel to be use with Guide Posts
and or Demountable Bushings.
They are available in two shapes (Round and Square) and different heights to meet the requirements
of Special Die Sets.
The unique design of those Bosses allows them to be interchangeable and do not require the use
of Dowel Pins for their assembly. Those bosses may be disassembly for tool grinding.
If required, those bosses could be welded to the Die Set after assembly.
The locating diameter on the Bosses for Guide Posts and Demountable Bushings is the same.
This allows the two plates of the Die Set to be machined together in a single setup.
MDL Demountable Metric Steel Bosses can also be use with MDL Metric Ball Bearing Components
shown on MDL Ball Bearing Components catalog. When using with Straight Sleeves or Demountable
Ball Bearing Bushings, please contact your MDL representative.
ASSEMBLY OPTIONS
28
Assembly Options for MDL
Steel Bosses
29
X05.DDD.FFF
Demountable Round Steel Bosses X06.DDD.FFF
D1 32 40 50 63 80
40 X05.032.040
50 X05.032.050
63 X05.040.063
80 X05.040.080 X05.050.080
40 X06.032.040
50 X06.032.050
63 X06.040.063
80 X06.040.080 X06.050.080
DIMENSIONAL DATA
D2 54 65 81 100 118
E 15
THREAD M6 M8 M10
30
X07.DDD.FFF
Demountable Square Steel Bosses
X08.DDD.FFF
D1 32 40 50 63 80
40 X07.032.040
50 X07.032.050
63 X07.040.063
80 X07.040.080 X07.050.080
40 X08.032.040
50 X08.032.050
63 X08.040.063
80 X08.040.080 X08.050.080
DIMENSIONAL DATA
D2 54 65 81 100 118
E 15
THREAD M6 M8 M10
31
BALL BEARING COMPONENTS
"D" STYLE
Besson S.A.S.
apins - 25 - França
09/09 - DVE.023.001
Inc.
a 47201 - 8819 Note: MDL "D" Style Ball Bearing Components are designed to be interchangeable
ax: 1-812-373-0042 with ball bearing components from "Danly/IEM" of the same size and type.
mdlcomponents.com "Danly/IEM" is a registered trademark of Connell Limited Partnership. MDL Mold & Die Components, Inc.
is not connected, in any way, to Danly/IEM or Connell Limited Prtnership.
MDL - India Pvt. Ltd. MDL Rodis S.A.S. MDL - Brasil Ltda.
Tamil Nadu - India Soultz - 68 - France Mairinque - SP - Brazil
MDL of Mexico S.A. of C.V. Porter Besson S.A.S. MDL Mold & Die Components Inc.
Queretaro - QRO - Mexico Serre les Sapins - 25 - France Columbus - IN - US