This document is a calibration certificate from Laboratory Calibration Centre, Atlas Copco (India) Ltd. It certifies that the laboratory is accredited according to ISO/IEC 17025:2005 with the certificate number CC-2797. The calibration certificate is valid from November 7, 2018 to November 6, 2020. It provides the measurement capabilities and calibration methods for various torque measuring and generating devices calibrated by the laboratory within specified measurement ranges.
NABL 122-08 - W.E.F. 01.01.16-Specific Criteria For Calibration Laboratories in Mechanical Discipline - Mobile Force Measuring System - Push Pull Gauge
This document is a calibration certificate from Laboratory Calibration Centre, Atlas Copco (India) Ltd. It certifies that the laboratory is accredited according to ISO/IEC 17025:2005 with the certificate number CC-2797. The calibration certificate is valid from November 7, 2018 to November 6, 2020. It provides the measurement capabilities and calibration methods for various torque measuring and generating devices calibrated by the laboratory within specified measurement ranges.
This document is a calibration certificate from Laboratory Calibration Centre, Atlas Copco (India) Ltd. It certifies that the laboratory is accredited according to ISO/IEC 17025:2005 with the certificate number CC-2797. The calibration certificate is valid from November 7, 2018 to November 6, 2020. It provides the measurement capabilities and calibration methods for various torque measuring and generating devices calibrated by the laboratory within specified measurement ranges.
This document is a calibration certificate from Laboratory Calibration Centre, Atlas Copco (India) Ltd. It certifies that the laboratory is accredited according to ISO/IEC 17025:2005 with the certificate number CC-2797. The calibration certificate is valid from November 7, 2018 to November 6, 2020. It provides the measurement capabilities and calibration methods for various torque measuring and generating devices calibrated by the laboratory within specified measurement ranges.
Laboratory Calibration Centre, Atlas Copco (India) Ltd.
, Atlas Copco Tools and
Assembly Systems, Office No. 301, 3rd Floor, Mantri Alpine, Bavdhan Budruk, Pune, Maharashtra Accreditation Standard ISO/IEC 17025: 2005 Certificate Number CC-2797 (in lieu of C-1465) Page 1 of 1 Validity 07.11.2018 to 06.11.2020 Last Amended on -
Sl. Quantity Measured / Range/Frequency *Calibration Measurement Remarks
Instrument Capability (±)
MECHANICAL CALIBRATION
I. TORQUE MEASURING DEVICES
1. Torque Transducer 2 Nm to 500 Nm 0.29 % Using Reference
with Indicator in Units 500 Nm to 3000 Nm 0.20 % Transducer & Torque Only$ Comparator Rig Reference Standard by Comparison Method Based on BS 7882:2008 In Clockwise Direction Only for Class 2 and Coarser
II. TORQUE GENERATING DEVICES
1. Torque Wrench$ 2 Nm to 400 Nm 0.50 % Using Reference
(Type-I Class B & C) Transducer & Comparator Rig with Attachment of Wrench Calibration Based on ISO 6789:2003 in Clockwise Direction Only
2. Torque of Electric 2 Nm to 500 Nm 0.62 % Using Standard Torque
Nut- Runner# Transducer with (Rotary Torque Tool) Indicator and Suitable Joint Simulation Test Rig Based on ISO 5393: 2017 / VDI-VDE 2645-2
* Measurement Capability is expressed as an uncertainty () at a confidence probability of 95%
$ Only in Permanent Laboratory # The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used.
NABL 122-08 - W.E.F. 01.01.16-Specific Criteria For Calibration Laboratories in Mechanical Discipline - Mobile Force Measuring System - Push Pull Gauge