This document provides specifications for a pressure vessel with the following key details:
1. It has a tag number of F-202 and will separate a two-phase fluid of methane and hydrogen.
2. It has an operating temperature of 29°C, design temperature of 121°C, operating pressure of 30 kg/cm2 and design pressure of 31 kg/cm2.
3. It has an internal diameter of 759mm, shell height of 2225mm, and total volume of 1.02m3. It will be constructed from carbon steel with elliptical heads.
This document provides specifications for a pressure vessel with the following key details:
1. It has a tag number of F-202 and will separate a two-phase fluid of methane and hydrogen.
2. It has an operating temperature of 29°C, design temperature of 121°C, operating pressure of 30 kg/cm2 and design pressure of 31 kg/cm2.
3. It has an internal diameter of 759mm, shell height of 2225mm, and total volume of 1.02m3. It will be constructed from carbon steel with elliptical heads.
This document provides specifications for a pressure vessel with the following key details:
1. It has a tag number of F-202 and will separate a two-phase fluid of methane and hydrogen.
2. It has an operating temperature of 29°C, design temperature of 121°C, operating pressure of 30 kg/cm2 and design pressure of 31 kg/cm2.
3. It has an internal diameter of 759mm, shell height of 2225mm, and total volume of 1.02m3. It will be constructed from carbon steel with elliptical heads.
1 TAG NO. F-202 SKETCH (BUNDLE / NOZZLE ORIENTATION)
GENERAL
2 SERVICE Separador bifásico
3 QUANTITY 1 4 5 FLUID CH4 y H2 6 DENSITY, kg / m³ 11.26 7 OPERATING TEMPERATURE, ºC 29 PROCESS
8 DESIGN TEMPERATURE, ºC 121
9 OPERATING PRESSURE, kg / cm2 30 10 DESIGN PRESSURE, kg / cm2 31 11 VISCOSITY, cP 0.8146 SEE ATTACHED DRAWING 12 13 DESIGN CODE ASME 14 INTERNAL DIAMETER, mm 759 15 SHELL HEIGTH, mm 2225 16 TOTAL VOLUME, m3 1.02 17 POSITION Vertical 18 MATERIAL Acero al carbono 515 CONSTRUCTION
19 INSULATION (TYPE / THK), mm -
20 VACUUM PRESSURE - 21 TOP HEAD Cabeza elíptica 22 BOTTOM HEAD Cabeza elíptica 23 SHELL THICKNESS, mm 11.86 24 HEAD THICKNESS, mm 11.75 25 INSPECTIONS 26 VESSEL WEIGHT, kg 1322 27 WEIGHT WITH WATER, kg 2321 28 29 ITEM NO. QTY. SIZE/RATING/TYPE SERVICE 30 A 1 5.4 in Alimentación 31 B 1 4.6 in Salida de gas 32 C 1 0.57 in Salida de líquido 33 D 1 31.5 in Man hole 34 F 1 0.5 in Valvula de alivio 35 G 1 1.5 in Control de temperatura NOZZLES
36 H 1 1.5 in Control de presión
37 I 1 3 in Valvula drenado 38 J 39 K 40 41 42 43 44
Introduction To Fluid Mechanics Prof. Suman Chakraborty Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 39 Application of Bernoulli's Equation - Part - II