Professional Documents
Culture Documents
Fire Stop Fischer - Comparacion Fischer - Hilti
Fire Stop Fischer - Comparacion Fischer - Hilti
Product with name FAB/FAS/ FASK (ablative) CP 673 (ablative) Fire protection coating / fire BC fire protection colour, fire
protection filler / fire protection putty
protection putty (intumescent)
(intumescent)
Water-insensitive (can be used Yes No No and can also not be used in Can be used with BC fire
outdoors) wet rooms! protection ceiling paint for
indoors and outdoors!
Coatability Yes – with water-based with Exposy No – may not be coated No – may not be coated, apart
dispersion paint from see below
Resistant to radioactive and UV Yes N.a. N.a. N.a.
radiation
Own heat behaviour of the cables Yes N.a. N.a. N.a.
Coating properties See FAB/FAS/ FASK (ablative) See CP 673 (ablative) Fire protection coating / fire BC fire protection colour, fire
protection filler / fire protection protection putty (intumescent)
putty (intumescent)
Light partition walls (GK) Yes Yes Yes Yes
Gas tightness check Civil defence test up to 100 Gas permeability check Tight against smoke gases Tight against smoke gases
mbar! (Fire fighting with according to DIN 1026
extinguishing gases)
fischerwerke Artur Fischer GmbH & Co. KG, Weinhalde 14 – 18, D - 72178 Waldachtal Page 4
System comparison of the features of ‘fischer FIRE STOP’ with competitor systems
Coating properties See FAB/FAS/ FASK (ablative) See CP 673 (ablative) BC fire protection colour, fire
protection putty (intumescent)
Light partition walls (GK) Yes Yes Yes
Light partition walls (GK) No permitted! Not permitted! Not permitted! Not permitted!
Minimum firestop thickness Wall 240 mm, ceiling 200 mm 150 mm 150 mm 180 mm
(incl. 40 mm mineral fibre
board)
Pipes in the firestop (wall/ceiling) Wall Wall and ceiling Wall and ceiling Not permitted!
Yield 1 kg of dry mortar yields 2.4 – 20 kg yields around 20.6 kg of 20 kg yields around 20 kg of 20 kg yields 23 litres of wet
2.7 litres – with 20 kg up to 54 fresh mortar, or approx. 17.2 fresh mortar, or approx. 19.1 mass
litres litres litres
Density 500-600 kg/m³ 1200 kg/m³, corresponds to MG approx. 1050 kg/m³ 1200 kg/m³
IIa
Additional cable coating Not necessary Not necessary Not necessary Not necessary
Option of subsequent installation Subsequent installation wedges Subsequent installation wedges Subsequent installation wedges Subsequent installation wedges
possible, opening without drill necessary necessary necessary
possible
Sound-damping quality proved by a test, Proof for solid wall, with N.a. N.a.
measurements without interpretation in interpretation of the results
installation
Distances for component May adjoin and be mounted at Min. 30 mm distance Min. 20 mm distance Below and at the side 0 mm, at
embrasure the side and below (0 mm) the top 30 mm!
Cable and cable support
fischerwerke Artur Fischer GmbH & Co. KG, Weinhalde 14 – 18, D - 72178 Waldachtal Page 6
System comparison of the features of ‘fischer FIRE STOP’ with competitor systems
constructions
Coatability With aqueous with Expoxy N.a. N.a.
floor dispersions
Temperature change resistance Checked N.a. N.a. N.a.
Expansion and shrinking Purely hydraulic hardening N.a. N.a. N.a.
behaviour (no tension cracks)
fischerwerke Artur Fischer GmbH & Co. KG, Weinhalde 14 – 18, D - 72178 Waldachtal Page 7
System comparison of the features of ‘fischer FIRE STOP’ with competitor systems
Light partition walls (GK) Not possible Possible Possible Not possible
Additional materials necessary None None Fire protection putty with cable None
bundles and subsequent
installation necessary
Inflationary effect in a fire Yes Yes No. as mineral fibre filling Yes
fischerwerke Artur Fischer GmbH & Co. KG, Weinhalde 14 – 18, D - 72178 Waldachtal Page 8
System comparison of the features of ‘fischer FIRE STOP’ with competitor systems
Minimum firestop thickness 130 mm / 230 mm 120 mm/ 170 mm / 200 mm 220 mm
Additional materials necessary No – Foam FBS possible as Yes – Fire protection mass at Yes – Fire protection putty
combination least 20 mm deep at all line continuous with ducts
joints
Applicator gun for additional With commercially available Special applicator gun Special applicator gun
materials applicator gun necessary necessary
Expanding effect in a fire Yes Yes Yes
Coatability Yes - with plastic dispersion, No – being clarified! N.a.
epoxy resins, PU acryl, etc.
Mechanically durable Yes N.a. N.a.
fischerwerke Artur Fischer GmbH & Co. KG, Weinhalde 14 – 18, D - 72178 Waldachtal Page 9
System comparison of the features of ‘fischer FIRE STOP’ with competitor systems
Assembly types (flush/surface mounted) surface mounted surface mounted (flush/surface mounted)
(inserted/mounted)
Closure of the sleeve Tension lock With fixation hook Fixation straps Tension lock
Sound-damping inlay possible 4 mm soft foam strip supplied With Armaflex damping <=26 Synthetic rubber insulation can 4 mm soft foam strip supplied
mm possible as a damping be included
inlay