EN 1803:2002 (E)
Bibliography
EN 849, Transportable gas cylinders — Cylinder valves — Specification and type testing.
EN 1089-2, Tranpsortable gas cylinders — Gas cylinder identification (excluding LPG) — Part 2: Precautionary
labels.
EN 1089-3, Transportable gas cylinders — Gas cylinder identification — Part 3: Colour coding.
prEN 14189, Transportable gas cylinders — Inspection and maintenance of eyiindar valves at time of periodic
inspection of gas cylinders.
Council Directive 1999/36/EC of 28 April 1999 on transportable pressure equipment (TPED)
84/527/EEC Council Directive of 17 September 1984 on the approximation of the laws of the Member States
relating to welded unalloyed steel gas cylinders
ADR European agreement on the International Carriage of Dangerous Goods by Road
RID Regulations concerning the International Carriage of Dangerous Goods by RallEN 1803:2002 (E)
Annex F
(informative)
Inspection and maintenance of valves and their connections: recommended
procedures
Cheok all threads to ensure the thread diameters, form, length, and taper are satisfactory.
It threads show signs of distortion, deformation, or burring, rectify these faults. Excessive thread damage or serious
deformation of the valve body, hand wheel, spindle or other components is cause for replacement.
Maintenance of the valve includes general cleaning together with replacement of elastomers and worn or damaged
components, packing and safety devices, where necessary.
Where the use of lubricants/elastomers is permitted, use only those approved for the gas service, particularly
oxidising gas service.
After the valve has been re-assembled cheok for leskage and correct operation.
‘This can be done prior to the valve being refitted to the cylinder, or during and after the first gas charge subsequent
to the inspection and test of the cylinder.
NOTE More detailed information on valve maintenance Is included in the following standard, currently in preparation:
Transportable gas cyinders — Inspection and maintenance of cylinder valves at time of perio inspection of gas
‘ovlincers' (prEN 14189)
24EN 1803:2002 (E)
Ss
Key
+ Rubber gland packing
Extractor casing
Control valve
Joint ring
lamp
Figure D.2 — Typical device for the removal of a damaged gas container valve