Professional Documents
Culture Documents
Nonmaterial Requirements For Pressure Vessels and Columns: Engineering Standard
Nonmaterial Requirements For Pressure Vessels and Columns: Engineering Standard
REV. NO. 0
ENGINEERING STANDARD DATE DEC. 1998
PAGE 1 OF 4
This document is issued by Engineering Standards Group, SABIC Engineering & Projects Management, Kingdom of Saudi Arabia.
All information contained in this document is the confidential property of SABIC. It can not be disclosed, copied or used for any purpose
without prior approval from SABIC. If you are not authorized to posses this document, please destroy it immediately.
NUMBER Q01-D20
Nonmaterial Requirements for REV. NO. 0
Pressure Vessels and Columns DATE DEC. 1998
ENGINEERING STANDARD PAGE 2 OF 4
CONTENTS
1. SCOPE ............................................................................................................. 3
2. REFERENCES 3
3. REQUIREMENTS 3
4. PRELIMINARY DRAWINGS FOR REVIEW AND APPROVAL BY SABIC ....... 3
5. CERTIFIED DRAWINGS, LITERATURE, PHOTOGRAPHS, AND PARTS
DATA 3
6. OPERATIONS, MAINTENANCE MANUALS, INSTALLATION
INSTRUCTIONS, AND TEST CERTIFICATES 3
APPENDIX
A .......................................................................................................................... 4
NUMBER Q01-D20
Nonmaterial Requirements for REV. NO. 0
Pressure Vessels and Columns DATE DEC. 1998
ENGINEERING STANDARD PAGE 3 OF 4
1. Scope
This document describes the requirements for submitting drawings and related documents by the successful bidder
for pressure vessel and columns.
2. References
Reference is made in this standard to the following document. The latest issue, amendments, and supplements to this
document shall apply unless otherwise indicated.
SABIC Engineering Standards (SES)
Q01-D15 Vessels: Data Sheets
3. Requirements
3.1 All nonmaterial requirements shall be as stated on Appendix A.
3.2 The applicable Item Reference as per Appendix A shall be shown on each document.
3.3 All final prints or transparencies shall be suitable for microfilming. Sepias or blue lines are not acceptable.
3.4 All drawings, manuals, and documents shall be written in English language.
APPENDIX A