Professional Documents
Culture Documents
BROCHURE LASTO LRB Lead Rubber Bearing CH en PDF
BROCHURE LASTO LRB Lead Rubber Bearing CH en PDF
BROCHURE LASTO LRB Lead Rubber Bearing CH en PDF
Switzerland www.mageba.ch
Seismic protection
Product features
Principle with limited space for bearings and seis-
1
mageba LASTO®LRB lead rubber bearings mic protection means all these functions
work on the principle of base isolation can be combined in a single device.
and limits the energy transferred from The fitting of structures with lead rubber
the ground to the structure in the event bearings is one of the most used seismic
of an earthquake. The rubber and steel isolation means and has proven its effec-
laminated bearing is designed to support tiveness in numerous earthquakes. The
the weight of the structure and to provide system has been researched over the past
post-yield elasticity. The rubber provides decades and allows the structural engi-
the isolation and re-centring of the bear- neer a straight-forward simulation of the
ing after a seismic event. The lead core device response due to simple bi-linear
deforms plastically under shear deforma- modelling.
tions, while dissipating energy through
heat. Seismic isolation
2
Seismic isolation is the decoupling of General Design Spectrum
Properties structures from ground motions induced Period shift
LASTO®LRB lead rubber bearings consist by earthquake motions which could cause
of alternate layers of elastomeric material damage to the structures. To achieve such abefore
acceleration
with a central lead core. They provide a called isolators – are strategically installed
high level of damping of up to 30% due to in specific locations of structures, allowing aafter
high absorption capacity of the lead core. them to perform properly during an earth-
As the reinforcement steel plates are fully quake. Strutures
w/o isolation
embedded in the elastomeric material, Seismic isolators provide sufficient flex- Natural Period [T]
2
Seismic protection
Important Note: This table is intended only as a preliminary reference for the design of the isolator. The final design and technical details will be fully defined once all
the parameters of the project are considered in the final design.
Legend
dbd Design seismic displacement F1 Yield force
D Rubber block diameter F2 Maximum horizontal force (at dbd)
te Total rubber height Kr Horizontal stiffness
HB Total isolator’s height Keff Effective stiffness
NSd Maximum vertical service load Kv Vertical stiffness
NEd Maximum vertical seismic load ξ Damping ratio
3
Seismic protection
Awaza Bridge (TM) Flendruz (CH) Langenargen (DE) Ramstore Bridge (KZ) Agin Bridge (TR) Vasco da Gama Bridge (PT)
Switzerland www.mageba.ch
Version 2013.04 CH-EN ©mageba mageba sa - Solistrasse 68 - 8180 Bülach - Switzerland - T +41 44 872 40 50 - info@mageba.ch