Professional Documents
Culture Documents
TNMS Imn
TNMS Imn
A42022-L5938-H52-1-76D1
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Trademarks:
All designations used in this document can be trademarks, the use of which by third parties for their
own purposes could violate the rights of their owners.
2 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
This document consists of a total of 132 pages. All pages are issue 1.
Contents
1 Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Supplementary Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 CE Conformity Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Personnel Requirements for Commissioning . . . . . . . . . . . . . . . . . . . . . . . . 7
A42022-L5938-H52-1-76D1 3
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
9 System Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.1 Adding Additional Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.2 Adding Additional NetServers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
4 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
14 Multi Server CDM: Installing the Multi Server CDM Software . . . . . . . . . . 114
14.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
14.2 Installing Multi Server CDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
14.2.1 Deinstalling Multi Server CDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
14.2.2 Adding and removing individual Multi Server CDM Components . . . . . . . 118
17 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
18 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
A42022-L5938-H52-1-76D1 5
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
6 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
1 Basic Information
Before you begin commissioning, read the general notes on documentation in the Tech-
nical Description (TED) as well as chapters 1 and 2 of this manual.
Initial installation is described beginning with “Preparing for Commissioning” in chapter
3. “Installing the Operating System” is given in chapter 4 and “Prerequisites and 3rd-Par-
ty Software” in chapter 5. The installation of TNMS Core/CDM is described from Chapter
6 onwards, deinstallation in Section 6.2.1 and the addition of individual TNMS
Core/CDM components/subcomponents in Section 6.2.2. Installation of additional
TNMS/CDM software is described in chapter 7 while chapter 8 contains the measures
after commissioning. Information on System expansion is contain in chapter 9.
Installtion information for the optional Multi Server CDM software is given from chapter
10 to 16.
To protect TNMS Core/CDM against viruses, you should install F-Secure on all TNMS
i Core/CDM machines. Contact the software release notes to see the released versions.
A42022-L5938-H52-1-76D1 7
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
8 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
All modules with ESD components have an outer grounding edge which is connected to
the module "ground" and which can be used when gripping the circuit board.
Modules are fully protected if they are enclosed in a shielded, unopened housing.
Nevertheless, the following basic safety precautions should always be followed when
handling ESD components:
– Always use a grounding bracelet connected to a grounding socket (see below) when
unpacking, packing, touching, unplugging or plugging modules bearing the ESD
(German EGB) symbol. This will ensure that the modules do not get damaged.
– Avoid touching the component connections, connector contacts or conductor tracks
(even if you are properly grounded).
– When unplugging and plugging modules, make sure you use the handles provided.
– If modules are only gripped by the handles for plugging/unplugging, they should not
be transported in a horizontal position (danger of breakage).
– When you remove the module from its subrack, place it on an antistatic mat.
– Make sure that all measuring equipment used is grounded.
A42022-L5938-H52-1-76D1 9
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– If you are using ungrounded measuring equipment, briefly connect the measuring
probe to ground (discharge) it before performing measurements on components and
modules.
– Ensure that the modules are installed in the correct slots.
European standard EN50082-1 contains detailed information on the correct handling of
i electrostatic-sensitive devices.
10 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
CPU: Xeon TX300, 2.66 CPU: P4, 2.4 GHz CPU: PIII, 1 GHz
GHz Multiprocessor operation Multiprocessor operation
Multiprocessor operation supported. supported.
supported
Memory: Memory: Memory:
1 GB or 2 GB *) 2 x 512 MB 2 x 256 MB
Hard Disk: Hard Disk: Hard Disk:
2 x 36 GB 40 GB 40 GB
Floppy Disk: Floppy Disk: Floppy Disk:
1.44 MB 1.44 MB 1.44 MB
CD-ROM drive CD-ROM drive CD-ROM drive
Ethernet card Ethernet card, 2x Ethernet card
RAID controller - -
DAT streamer for backup - -
- - PCI I/O, optional
Color monitor 17” Color monitor 17” Color monitor 21”
Operating system: Operating system: Operating system:
Windows 2000 Server Windows 2000 Profes- Windows 2000 Profes-
sional sional
*) Enhanced Hardware
Tab. 3.1 Hardware Requirements for TNMS Core/CDM Server, NetServer and Cli-
ent
A42022-L5938-H52-1-76D1 11
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
12 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
provides the necessary utility programs and drivers for configuring and installing the
server machine. More information is provided in Section 4.2.
2. Windows 2000 Professional and Windows 2000 Server incl. Service Pack 4:
The Windows 2000 Professional operating system is required for the Client and Net-
Server machines. Windows 2000 Server must be installed on the Server machine
and on the Client machine if Metaframe XP is installed on the Client machine also.
Installation instructions for both operating systems are provided in Chapter 4, how-
ever, pre-installed machines can also be used.
3. Windows 2000 Terminal Services:
The Windows 2000 Terminal Services component must be installed on the client
machine so that the TNMS Core/CDM system can be accessed remotely via
MetaFrame. More information is provided in Section 4.2.5.
4. MetaFrame XP (FR2):
MetaFrame XP is used to enable remote access to the TNMS Core/CDM Client and
TNMS Core/CDM SysAdmin software on the TNMS Core/CDM Client machine.
More information on installing MetaFrame XP is provided in Section 5.4.
5. Internet Explorer 6.0:
This must be installed on the NetServer to enable MSN functionality, and on the cli-
ent machine. If this is not already pre-installed, it can be downloaded from the Inter-
net.
6. TNMS Core/CDM 9.0:
This CD contains the following software components for installation:
– Integrated TNMS Core/CDM software installation package:
This installation program includes the Server, NetServer, Backup Server, Client
and SysAdmin components. These can be installed either individually or together
as required.
The EML packages for QB3M, ELI, EMOS, Generic SNMP, PDH and UNO are
also available for selection during the TNMS Core/CDM installation. The EML
packages are installed on the Server, NetServer and Client PC.
More information on installing TNMS Core/CDM is provided in Chapter 6.
As well as the TNMS Core/CDM installation, the following 3rd-party software
components are also included on this CD:
– Adobe Acrobat Reader:
The customer documentation for TNMS Core/CDM is provided in *.pdf format.
The Adobe Acrobat Reader should be installed on the Server and Client ma-
chines so that the documentation files can be opened.
– Microsoft Desktop Engine MSDE 2000 incl. Service Packs 2 and 3:
The MSDE is installed on the TNMS Core/CDM Server. More information on in-
stalling MSDE is provided in Section 5.1. For larger configurations, however, SQL
Server 2000 incl. Service Packs 2 and 3 is recommended. Contact Siemens Tech-
nical Sales for further information.
– Microsoft XML parser:
The XML parser is installed on the client machine so that the TNMS Core/CDM
system can support the export and import of network configuration data in XML
format. More information on installing the XML parser is provided in Section 5.2.
– OSI stack:
If QB3 is to be used, OSI stack software must be installed on NetServer PCs be-
fore the NetServer software itself. More information on installing the OSI stack is
provided in Section 5.3.
7. MSN:
MSN (multi-service node) is an optional EML package which is installed on the Serv-
A42022-L5938-H52-1-76D1 13
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Software CD Overview
The software will be delivered on CD-ROMs. Type and content of the necessary CDs
depends on the specific planned and delivered configuration. The operating system will
be delivered as part of the hardware, it is not included within the following table.
Table of the deliverable CD-ROMs:
– Exceed 7 Multiplatform 7.1
– ULAF+ Library
14 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 15
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Further hints are given within the chapters describing the installation details.
The installation sequence is described within Section 3.3.3. It is urgently recommended
to follow this instructions otherwise problems may occur during installation.
The individual stages in the commissioning process must be logged using the forms
supplied for the transfer protocol. The transfer protocol documents the completeness of
the delivery, tests performed and the test results.
Installation Sequence
The system should be commissioned as follows:
1. Set up and cable the PCs, as described in Section 3.2.1 above.
2. Install the operating system and additional hardware components, and configure the
system under Windows 2000 as described in Chapter 4.
3. If QB3 is to be used, install the OSI stack on the NetServer PCs as described in Sec-
tion 5.3.
4. Install the MSDE (Microsoft Desktop Engine) on the Server and Backup Server PC,
as described in Section 5.1.
5. To enable import and export of XML data, install the XML parser MSXML 4.0 as de-
scribed in Section 5.2.
6. If TCOA proxy, RPR Manager or TCOM is to be installed, install 3rd-party software
as described in the associated sections.
7. Install the TNMS Core/CDM software components on the corresponding machines
as described in Chapter 6:
– TNMS Core/CDM Client
– TNMS Core/CDM Server
– TNMS Core/CDM NetServer
– TNMS Core/CDM Backup Server
– TNMS Core/CDM EML Packages
– Additional TNMS software, such as PLET or the optional EML packages.
When installing the optional RPR Manager, install TCOA proxy first.
i
MDAC (Microsoft Data Access Components) and Java Runtime Environment are in-
i stalled automatically during the TNMS Core/CDM installation.
16 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
8. If the TNMS SX and EM-OS element managers are to be integrated, install Hum-
mingbird Exceed.
9. Configure the TNMS Core/CDM components and connect network elements as de-
scribed in Chapter 8.
10. Perform system testing in accordance with the test cases described in the accep-
tance test protocol. For more information, contact Siemens Technical Sales.
A42022-L5938-H52-1-76D1 17
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
18 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
es required for these computers. Per server licensing should be used if you are run-
ning a single Windows 2000 Server.
If you are not sure which mode to use, use per server licensing, as it is possible to switch
subsequently from "per server" to "per workplace" licensing at no extra cost.
If you want to use terminal services both for remote administration and for an application
server, use "per workplace" licensing. For the Internet Connector license of the terminal
services, however, use "per server" licensing. More information is provided in
Section 5.4.
4.2.1 Installing Windows 2000 Server (If SCSI RAID is Already Configured)
If you have already configured a RAID system (see Section 3.2.2) including mirrored
disks and partitions on the TNMS Core/CDM Server machine, proceed as follows:
1. Insert the ServerStart CD into the CD-ROM drive.
– Reboot the system.
A42022-L5938-H52-1-76D1 19
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
20 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 21
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
22 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– From the left list "Protocols for this adapter" select the "TCP/IP" network protocol.
– Press the "Add" button.
The network protocol is added to the list "Selected Protocols for this Adapter".
– Enter your settings for the IP address and subnet mask. Also define the standard
gateway, if required.
– In the "DNS/WINS Configuration..." option, enter the addresses of the preferred
DNS Server, and (if required) an alternative DNS Server.
If the local server is to be used as preferred or alternative DNS Server, enter the same
i IP address as in the preceding step. In this case, it is also possible to configure the
WINS Server, if required.
– If you select the "Install default components" option, the standard components are
configured by default.
– Continue with "Next”.
A42022-L5938-H52-1-76D1 23
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
46. "Insert the MS Windows 2000 CD-ROM into the CD-ROM drive." window:
– Remove the ServerStart CD from the CD-ROM drive.
– Insert the MS Windows 2000 Server CD into the CD-ROM drive.
– Confirm with "OK".
24 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 25
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– Select both HD icons with the mouse. If either of the HDs has a valid partition ta-
ble, the "Adaptec Storage Manager" window appears with a corresponding mes-
sage.
– Select "Yes".
Both HDs are shown with a green tick.
– Click on "Include Drive". Both HDs must be assigned a RAID DISK icon, i.e. a
RAID1 icon must be displayed with a line pointing to each HD.
– Review the configuration and select "Done".
– Confirm the following warning messages with "OK".
Two black flags appear, one above the LSU icon and another above the RAID1 icon.
The "Array Group Information" window appears with a status field informing you
about installation progress.
– Wait until formatting has been completed and the array group has been created,
i.e. when the status field shows "optimal".
– Exit the "Adaptec Storage Manager".
– Reboot the system.
26 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 27
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
28 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– If you select the "Install default components" option, the standard components are
configured by default.
– Continue with "Next”.
A42022-L5938-H52-1-76D1 29
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
37. "Insert the MS Windows 2000 CD-ROM into the CD-ROM drive." window:
– Remove the ServerStart CD from the CD-ROM drive.
– Insert the MS Windows 2000 Server CD into the CD-ROM drive.
– Complete your configuration with "OK".
30 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 31
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
32 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 33
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– Install suitable drivers by double-clicking the Setup.exe file on the floppy disk sup-
plied.
– Start the TNMS Core/CDM Client after installing the drivers.
More information is provided in the I/O card documentation.
34 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
This chapter gives installation descriptions for the necessary software to be installed pri-
or to TNMS Core/CDM and its additional components.
3rd-party software is delivered on a separate CD-ROMs (for the order number see the
release document).
Uninstalling MSDE
In order to uninstall the MSDE, open Start -> Settings -> Control Panel -> Add/Remove
Programs:
– Select the MSDE from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
2. Double-click the "msxml4.msi” file in the MSXML directory on the TNMS Core/CDM
9.0 software CD.
4. In the "End-User License Agreement” window, accept the terms of the license
agreement, and press "Next” to continue.
5. In the "Customer Information” window, enter a user name and the name of your com-
pany in the appropriate fields. Press "Next” to continue.
A42022-L5938-H52-1-76D1 35
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
7. The window "Installing Microsoft XML Parser and SDK” window is now displayed.
The progress of the installation is indicated by the progress bar.
8. Once the installation is complete, the window "Completing the Microsoft XML Parser
and SDK Setup Wizard” is displayed. Press "Finish” to complete the installation.
Uninstalling MSXML
In order to uninstall the MSXML, open Start -> Settings -> Control Panel -> Add/Remove
Programs:
– Select the MSXML from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
3. In the "Choose Destination Location" window which is now displayed, a default in-
stallation directory is offered for the OSI stack. Press "Next” to continue.
4. In the "Please select:" window, select the NSAP address option best suited to your
company’s network and press "Next”.
5. In the "Getting NSAP" window, enter the local NSAP address and press "Next”.
6. In the "Start Copying Files" ensure that the settings displayed are correct, and if so,
press "Next” to continue.
7. A setup status window is now displayed, showing the progress of the OSI stack in-
stallation.
8. In the ”InstallShield Wizard Complete” window select the option for restarting the
computer and press “Finish” to complete the OSI stack installation.
Once the computer has rebooted, open the OSI stack via Start -> Settings -> Control
Panel -> OSI Stack.
You can now check the OSI stack settings as follows:
– Note the settings of the ES-IS and IS-IS parameters (the IS-IS parameters can be
displayed by pressing Ctrl + I).
– Set the value for "Number of Channels and Ctx” to greater than/equal to 140. This
is the number of OSI stack connections which can be established simultaneously.
The recommended value is 500.
36 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– Note the network interface card to which the OSI is connected and check this against
the LAN card settings in the Control Panel.
– Activate the options "Open Stack, when Operator starts” and "Start stack as ser-
vice".
In other words you must install the MetaFrame Server first, then enter the corresponding
licenses, and then publish the required applications. Only when these steps have been
completed can you install the MetaFrame Client and configure the ICA Client connec-
tion.
A42022-L5938-H52-1-76D1 37
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
4. In the window "Welcome to the Citrix MetaFrame XP Server for Windows with Fea-
ture Release 3 Installation Wizard", press "Next".
5. In the "License Agreement" window, select "I accept the license agreement" and
press "Next".
6. In the "Product Family Selection" window, select "MetaFrame XPs" and press "Next".
7. In the "Select Product Type" window, select "Retail" and press "Next".
9. In the "Create or Join a Server Farm" window, select "Create a new farm" and press
"Next".
10. In the "Create a Server Farm" window, enter an appropriate "Farm Name", select
"Use a local database (Microsoft Access) on this server" and "Use Default Zone
Name", and press "Next".
11. In the "Assign Farm Administrator Credentials" window, enter an appropriate "User
Name" (e.g. TNMS) and "Domain" description for the local domain of the MetaFrame
server host (e.g. PC170). Press "Next".
12. In the "Configure shadowing" window, select "Prohibit shadowing of ICA sessions on
this server" and press "Next".
38 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
13. In the "Configure Citrix XML Service Port" window, enter the default value "80" and
press "Next".
14. In the window "Review your selections listed below", ensure that the data shown is
correct, and press "Finish" to complete this section of the installation.
In the windows which follow, the progress of the installation is indicated by progress
bars.
15. When installation has been completed, the window "Citrix MetaFrame XP Server for
Windows with Feature Release 3 has been successfully installed" is displayed.
Ensure the options "Launching the ICA Client Distribution wizard" and "View the Re-
adme file" are not selected and close this window by pressing "Close".
16. A command prompt appears asking whether you wish to restart the computer -
press "Yes".
3. The Citrix Management Console is now shown for the MetaFrame Server farm you
have just configured. In the tree view to the left of the console, right-click "Licenses"
and select the option "Add License..." from the context menu which appears.
4. In the "Add License" dialog, enter the serial number of the server license and press
"OK".
5. In the success window you will be asked whether you wish to activate the license at
this time - press “No”.
6. In the tree view, right-click the "Licenses" option again, select "Add License...", and
in the "Add License" dialog, enter the license number for the ICA Client connection.
7. In the success window you will be asked whether you wish to activate the license at
this time - press “No”.
You have a grace period of 35 days before the both licenses must be activated.
Publishing Applications
As precondition, TNMS Core Client and/or TNMS SysAdmin must be installed. The ap-
plications which the remote MetaFrame Client PC is permitted to access (e.g. TNMS Cli-
ent or TNMS SysAdmin) can be specified on the MetaFrame Server as follows:
A42022-L5938-H52-1-76D1 39
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
1. In the Citrix Management Console, go to the main menu bar and select "Actions" ->
"New" -> "Published Application".
3. In the "Specify What to Publish" window, select "Application". Specify the "Com-
mand Line" by browsing to the installation directory for the relevant application and
selecting the *.exe file for the application e.g. C:\Program Files\Sie-
mens\TNMS\Bin\tnClient.EXE. You can also specify a "Working Directory" e.g.
C:\Program Files\Siemens\TNMS\Bin. Press "Next" continue.
5. In the "Specify Application Appearance" window, set the "Session Window Size" to
1024x768, and set the "Colors" to "True Color (24 bit)". Select "Maximize application
at startup" and press "Next".
6. In the "Specify ICA Client Requirements" window, select "Enable Audio", set "En-
cryption" to "Basic" and press "Next".
7. In the "Specify Servers" window, select the name of the MetaFrame Server comput-
er from the "Available Servers" list. Press "Add" to add this server to the "Configured
Servers" list, and press "Next" to continue.
8. In the "Specify Users" window, select the server name from the "Look in" field, select
the "Show users" option, and select the appropriate user from the list provided. This
user will be the user entered during the MetaFrame server installation, e.g. TNMS.
Once you have selected the user, press "Add" to add this user to the "Configured
Accounts". Press "Finish" to complete publishing for this application.
9. In the Citrix Management Console, you can now see the published application in the
tree view under "Applications".
4. In the window "Welcome to the Citrix ICA Client Installation Wizard", press "Next".
40 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
5. In the "License Agreement" window, select "I accept the license agreement" and
press "Next".
7. In the "Select Program Folder" window, enter "Citrix ICA Client" and press "Next".
8. In the "ICA Client Name" window, enter a name for the client PC, e.g. pc109, and
press "Next".
9. In the "Select Desired Features" window, select "No" and press "Next".
10. In the window "Ready to Install the Application", press "Next" to begin installation. A
progress bar is now shown indicating the progress of the installation.
11. In the window "Citrix ICA Client has been successfully installed" click "Finish" to
complete the installation.
4. In the “Find New Application Set” window, select “Local Area Network” and press
“Next”.
5. In the window which appears, enter a description for the new application set and se-
lect the server where the application is installed from the dropdown list “Click below
to locate the Application Set to add”. Use the “Server Location...” button to add your
MeataFrame server’s IP address or hostname to the Address List. Press “Next” to
continue.
6. In the window which appears select “Use Server Default” for the “Window Colors”.
for the “Window Size” select “Seamless Window”. Press “Next” to continue.
9. Double-click this new icon. A Login window is opened. Enter the user name for the
MetaFrame Server as specified during Metaframe Server installation (e.g. TNMS)
A42022-L5938-H52-1-76D1 41
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
and enter the MetaFrame Server domain as specified during MetaFrame installation
(e.g. pc170). Finally specify a password and press “OK”.
10. In the Citrix Program Neighborhood, a folder is now displayed for the published ap-
plication, e.g. TNMS.
42 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
2. In the "License Agreement" window, read the agreement and accept it by pressing
"Yes".
3. In the "Customer Information” window, enter a user name and the name of your com-
pany in the appropriate fields. Press "Next” to continue.
A42022-L5938-H52-1-76D1 43
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
5. In the "Select TNMS Core Components" window, select the components you wish
to install. In this window, you can install the Server, NetServer, BackupServer, Client,
and SysAdmin components either together or individually as required (see Section
6.1 for details).
Steps 6.and 7. will only be performed when installing the Server. If you did not choose
i to install this component, continue with step 8.
6. In case of Server installation, now the TNMS basic license key must be installed.
44 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
9. In the "Select Program Folder” window, a default program folder is offered. Press
"Next” to continue. The system now registers additional installation packages.
10. In the "Select the required EML packages" window you can select the required EML
components for installation. Press “Next” to continue.
11. In the "Select the required interface packages" window you can select the required
interface packages for installation: SNMP Proxy, TCOA Proxy G7 and/or TCOA
A42022-L5938-H52-1-76D1 45
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Proxy TMF. Then press “Next” to continue. Note that TCOA Proxy G7 and TCOA
Proxy TMF cannot be installed together; only one of them can be installed.
12. The “Start Copying Files” window shows all software components to be installed.
Press “Next” to continue.
13. JRE is required only by some LCTs. You will only be asked whether to install JRE in
case such a LCT was selected.
– Install JRE and do not deinstall any other version.
During the JRE installation you will be asked to specify the used browser. Select “Mi-
crosoft Internet Explorer”.
14. The "Setup Status” window which is now displayed indicates the progress of the in-
stallation. Various system messages are also output during this part of the installa-
tion, for example indicating that LCTs are being installed.
This part of the installation could take some time.
15. Once all system components are installed, the "InstallShield Wizard Complete" win-
dow is displayed. Select the option for restarting the computer, and press "Finish” to
complete the installation.
46 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
5. Log off the TNMS SysAdmin software from the server, and exit SysAdmin.
3. The preconditions for deinstalling are checked and a welcome window is displayed.
Select "Remove” and press "Next” to continue.
4. In the "Confirm File Deletion” window, press OK to activate deinstallation. The dein-
stallation starts and information windows displays the software parts, which are cur-
rently deinstalled. This will take some minutes.
5. Depending on the programs that have been installed you may be prompted to con-
firm the deletion of further files.
6. You will also be asked whether you wish to delete the directory containing your back-
up files:
– If you have stored the backup files in the default directory, i.e.
"C:\Program Files\Siemens\TNMS\data\Archive”, do not delete the directory.
– If you have stored the backup files in a different directory, you may delete the de-
fault directory.
A42022-L5938-H52-1-76D1 47
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
7. The "Maintenance Complete” window is now displayed. If certain folders could not
be deleted, this is indicated here. Press "Finish" to complete the deinstallation pro-
cess.
10. Check that the TNMS services listed above are removed from the services list.
7. Start the installation/deinstallation procedure via Start -> Settings -> Control Panel
-> Add/Remove Programs. Select "TNMS" and click the "Change/Remove" button.
9. In the Select TNMS Core/CDM components" window, the components already in-
stalled are displayed. Select the components you wish to install or uninstall and
press "Next” to continue.
10. In the "Select the required EML packages” window, select the components you wish
to install or deinstall, and press "Next” to continue.
48 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
11. The "Setup Status” window which is now displayed indicates the progress of the pro-
cedure.
12. Once the selected components are installed or deinstalled, the "Maintenance Com-
plete" window is displayed. Press "Finish” to complete the process.
A42022-L5938-H52-1-76D1 49
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
50 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
If a TCOA proxy is to be installed and GUI Cut Through is used, a separate PC and
MetaFrame is necessary. More information is provided in Section 5.4.
A42022-L5938-H52-1-76D1 51
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
If multiple LAN cards are configured on a system with TCOA proxy the following instruc-
tions should be completed before the installation of the TCOA Deployment Software:
– Open "Start" -> "Settings" -> "Network and Dial-up Connections".
– Select from the menu bar "Advanced" -> "Advanced Settings...".
– Select the "Adapters and Bindings" pane.
– In the "Connections" window identify the LAN connection that is used for the com-
munication between TCOA and NMS. If this connection is not at the first position in
the list, select this connection and use the arrows at the right side of this window to
set this LAN connection to the first position in the list.
If you use more than one LAN card you have to complete the previous instruction for a
! correctly working system. Otherwise it may be that the NMS does not receive any noti-
fication emitted by the TCOA via Notification Service.
3. Navigate to the root directory of the CD folder and run the "Setup.exe”.
52 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
10. A "Setup Status" window will be displayed. The installation and configuration of the
Java 2 Runtime Environment are performed automatically.
A42022-L5938-H52-1-76D1 53
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
22. Now the Orbix Setup will transfer the files. Then a web browser window with some
Orbix documentation is shown, close this window.
Finally additional user input is required.
2. "Licensing" window:
Select the radio button “Use installed license file” and use the default location
(C:\Program files\IONA\etc\licenses.txt)
-> Confirm with "Next".
54 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
7. "Information" window:
If the 'var' subdirectory does not exist, agree to create the directory.
-> Confirm with "Yes".
A42022-L5938-H52-1-76D1 55
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
56 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
Prerequisites
The following prerequisites must be met before you can begin installing the TCOM soft-
ware package:
– TNMS Core/CDM 9.0 is installed on the Server, NetServer(s) and Client machines.
The OSI stack does not need to be installed on the TCOM NetServer.
– The TCOM Deployment Software is installed on the NetServer.
– If the FTP Server software must be installed during the installation process the latest
security hotfixes and service packs for the installed Windows 2000 operation system
are required. The setup program may also require the original Windows 2000 instal-
lation CD-ROM.
If you do not want to install the FTP Server it restricts you from getting any historical
performance data from network elements.
Deactivate the TNMS Core/CDM NetServer(s) and stop the TNMS Core/CDM Server,
i close all TNMS applications and stop all TNMS Windows services.
In addition to the installation steps described for the TNMS Core/CDM component, the
following installation steps are required for TCOM operation:
– Installation of the TCOM Configuration Tool on the NetServer to handle specific NEs.
– Installation of the TCOM software package, also named TCOM EML Server pack-
age, on Server, NetServer(s) and Client machines.
– Configuration of the NetServer, DCN channels and NEs for this server.
The complete TCOM installation process in fact consists of:
– "7.3.1 3rd-Party Software for TCOM"
– "7.3.2 TCOM Installation"
– "7.3.3 TCOM Configuration Tool"
– "7.3.4 TCOM EML Server Setup"
– "7.3.5 TCOM DCN Management Configuration"
The ORB9.0_DS CD contains the 3rd-party software in the directory "Product_CDs” and
the "main setup" for starting and controlling the 3rd-party software in the root directory
of the CD. The "main setup" also configures the 3rd-party software after installation to
operate together with TNMS Core/CDM.
A42022-L5938-H52-1-76D1 57
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
10. A "Setup Status" window will be displayed. The installation and configuration of the
Java Runtime Environment are performed automatically.
58 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
22. Now the Orbix Setup will transfer the files. Then a web browser window with some
Orbix documentation is shown, close this window.
Finally additional user input is required.
A42022-L5938-H52-1-76D1 59
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
2. "Licensing" window:
Select the radio button “Use installed license file” and use the default location
(C:\Program files\IONA\etc\licenses.txt)
-> Confirm with "Next".
7. "Information" window:
If the 'var' subdirectory does not exist, agree to create the directory.
-> Confirm with "Yes".
60 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
16. Finally, the 'InstallShield Wizard Complete' window prompts you to restart your com-
puter.
-> Accept the default "Yes, I want to restart my computer now" by pressing “Finish”
to reboot your PC immediately.
A42022-L5938-H52-1-76D1 61
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
2. Next the Welcome window of the InstallShield Wizard appears. Press "Next” to con-
tinue.
3. The License Agreement window is now displayed. Read the license agreement and
press "Yes” to accept the licensing terms and conditions and to continue.
4. The Customer Information window is now displayed. Enter the user name and the
name of the company for which this copy of TCOM EML Server is registered, and
press "Next” to continue.
5. If the FTP Server is not yet installed, you are now asked if you want to install the FTP
Server.
Installing the FTP Server requires to have the latest security hotfixes and service packs
i for the installed Windows 2000 operation system. The setup program may also require
the original Windows 2000 installation CD-ROM.
If you do not want to install the FTP Server it restricts you from getting any historical per-
formance data from network elements.
Click "Yes” if you want to install the FTP Server now, otherwise click "No”.
After installing the FTP Server you must install the latest security hotfixes and ser-
vice packs for the Windows 2000 operation system.
6. In the Choose Destination Location window you can select the destination folder to
install the EML-TCOM. Select the "Browse” button and choose the destination folder
for the installation. Then continue with "Next”.
7. Before the files are copied, the InstallShield Wizard displays the installation settings.
If you wish to modify any of these settings, press "Back”. Otherwise, you can contin-
ue with "Next”.
8. The InstallShield Wizard now begins the installation. The status of the installation is
indicated by a progress bar.
During the installation also the embedded FTP Server installation on the NetServer
will be carried out, if "Yes” was chosen before. After successful installation the Install
Wizard Complete window is displayed. Press “Finish” to complete the installation.
62 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
5. After the successful modification of the TCOM software, the Maintenance Complete
window appears. Click "Finish” to complete the modification procedure.
1. Now start the TCOM configuration for the specific EMS system on the NetServer:
2. The Welcome window of the TCOM configuration tool appears. Press "Next” to con-
tinue.
A42022-L5938-H52-1-76D1 63
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
3. While copying the files, the Installation Wizard displays the installation settings.
If you wish to modify any of these settings, press "Back”. Otherwise, you can contin-
ue with "Next”.
4. The InstallShield Wizard begins the installation of the TCOM configuration tool files.
The status of the installation is indicated by a progress bar.
5. Finally the Maintenance Complete window appears. Click "Finish” to complete the
installation procedure. When the installation has been completed, no reboot is nec-
essary.
64 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
1. To proceed with the TCOM EML Server Setup open the "DCN Management” window
under TNMS Core/CDM SysAdmin and add a channel for the TCOM NetServer:
Fig. 7.1 Add Channel for TCOM NetServer in the DCN Management Window
2. Select the channel type from the list below, either TCOM (Go7 2.0.0) or TCOM (TMF
814 2.1) and click "OK”. The channel to be used depends on the EMS to which a
connection is to be established.
3. In the "General” page of the "TCOM Channel Properties” window enter the unique
ID Name for the TCOM channel. If you want, you can also enter an additional text in
the description field.
Detailed information on the fields of the "General” page can be obtained by clicking the
i "Help” button in the window.
A42022-L5938-H52-1-76D1 65
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Fig. 7.3 Enter the ID Name for the Channel on the General Page
4. If you want to control the DCN load during the system startup, you can choose “En-
able Scheduled Startup” and define the maximal number of network elements to be
simultaneously initialized (Fig. 7.4).
5. Depending on the selected TCOM channel type (TCOM (Go7 2.0.0) or TCOM (TMF
814 2.1)) two individual views of the "EMS Properties” page are displayed.
Fig. 7.5 shows the view for the channel type TCOM (Go7 2.0.0).
Detailed information on the fields of the "EMS Properties” page can be obtained by click-
i ing the "Help” button in the window.
66 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
6. Fig. 7.6 shows the view for the channel type MTNM TMF 814 2.0.
Detailed information on the fields of the "EMS Properties” page can be obtained by click-
i ing the "Help” button in the window.
Fig. 7.6 EMS Properties Page (in case of TMF 814 2.0)
A42022-L5938-H52-1-76D1 67
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
7. Next, if required, select the "Performance Management” register and enable the per-
formance management check box and fill in the required fields.
Detailed information on the fields of the "Performance Management” page can be ob-
i tained by clicking the "Help” button in the window.
8. Finally you must enter the data for the GUI Cut Through to be able to open the EMS
GUI in the TNMS Core/CDM GUI, if required by the EMS.
Detailed information on the fields of the "Performance Management” page can be ob-
i tained by clicking the "Help” button in the window.
68 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
9. Having entered these configuration data the status "Running” will be displayed in the
"DCN Management” window if
– the DCN Connections check box was activated before,
– the NetServer has been started,
– the TCOM EML Server check box was activated, or
– a physical connection to the EMS exists, the EMS has been started and is ready
for communication.
A42022-L5938-H52-1-76D1 69
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
2. Select the desired DCN object from the object list as shown below:
3. By selecting the NE and clicking the "Adopt” button with the left mouse tab, the se-
lected NE will be adopted into the TNMS Core/CDM. The properties window for this
NE opens showing the "General” page. In this example, a SL64 is used.
Enter the ID Name; if required you can change the NE Name and enter user-defined
text into the User Text fields and click "Apply” to save your settings.
4. You can click the "NE Properties” register below to show the "NE Properties” page.
Do not change the field "EMS Management Element Id” in the NE Properties page!
!
70 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
5. In the "DCN Management” window, the DCN object (in the example below it is a
SL64) is now displayed in the state "Deactivated”.
Activate the DCN object by clicking the check box. As a result, the DCN object
changes its state to "Starting Up” and finally to “Running”.
The TCOM DCN Management configuration is now complete. The TCOM network ele-
ment which was chosen to be configured is ready for use.
A42022-L5938-H52-1-76D1 71
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
5. In the "Select Program Folder” window, a default program folder is offered. Press
"Next” to continue.
A progress bar is now displayed indicating the progress of the installation.
6. The window "InstallShield Wizard Complete” is now shown. Select the option for re-
starting the computer, and press "Finish” to complete the installation.
In order to uninstall PLET, open Start -> Settings -> Control Panel -> Add/Remove Pro-
grams:
– Select PLET from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
3. In the "License Agreement" window, select "I accept the license agreement" and
press "Next".
72 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
4. In the "Customer Information” window, enter a user name and the name of your com-
pany in the appropriate fields. Press "Next” to continue.
6. In the "Start Copying Files" window, ensure that the settings displayed are correct,
and if so, press "Next” to continue.
7. The "Setup Status” window which is now displayed indicates the progress of the in-
stallation.
Various LCTs are installed now as well.
8. You are now asked whether you wish to install TransXpress WaveLine. Press "Yes”
to continue.
9. The window "InstallShield Wizard Complete” is now shown. Select the option for re-
starting the computer, and press "Finish” to complete the installation.
In order to uninstall Waveline, open Start -> Settings -> Control Panel -> Add/Remove
Programs:
– Select Waveline from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
3. In the "License Agreement" window, read the license agreement and press "Yes" to
confirm.
5. In the "Start Copying Files" ensure that the settings displayed are correct, and if so,
press "Next” to continue.
6. The "Setup Status” window which is now displayed indicates the progress of the in-
stallation.
7. The window "InstallShield Wizard Complete” is now shown. Press "Finish” to com-
plete the installation.
A42022-L5938-H52-1-76D1 73
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
8. Stop and start the TNMS Server to get MSN functionality in your TNMS Server ap-
plication. In the DCN management, the DCN channel type “Multi NE controller” and
the NE type “MSN” are now available.
In order to uninstall MSN, open Start -> Settings -> Control Panel -> Add/Remove Pro-
grams:
– Select EML-MSN from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option and press “Next”.
– Confirm the uninstall process with "OK”.
– In the window "Locked File Detected” press “Ignore” (leaves the locked file on the
system).
– Confirm with "Finish”.
– Stop and start the TNMS Server to apply the changes.
Licensing Information
For the enhanced applications, a license file is required. You must rename the original
name of the license file to “licenses.xml” and copy it into the directory C:\tnms@p\licens-
es.
Prerequisites
The TNMS @P Server installation consists of the following elements:
– TNMS Core/CDM is the Base Platform for the TNMS @P Server software to be in-
stalled on the TNMS Server PC. After installing the Base Platform a reboot of the
TNMS Server PC should be done.
– The TNMS @P proxy must be installed on the TNMS Server PC. The proxy requires
ORBIX E2A ASP, which is provided on the ORB CD. For installation information see
Section 7.2.1.
– The TNMS @P SysAdmin, RPR client and Scheduled Service Activationmust be in-
stalled on the machine where TNMS SysAdmin is installed.
TNMS @P and the enhanced applications use JRE 1.4.1. As they are installed into local
i subdirectories, install them both when asked for.
Do not replace any JRE version to keep TNMS Core/CDM operable!
74 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
Installation
1. Terminate all TNMS Core/CDM processes and then stop the TNMS Core/CDM
Server prior to installing TNMS @P proxy.
3. An “Introduction” window is now displayed. Press "Next” to continue, the “Choose In-
stall Set” window opens where you can select the desired applications to be in-
stalled:
4. Press “Next” to continue. In the "License Agreement" window, read the license
agreement. Press "Next" to confirm.
5. In the "Choose Install Folder" window, enter the path where TNMS @P Server are
to be installed or press “Choose” to browse for a folder. Press "Next” to continue.
The window "Install Complete” is now shown. Press "Done” to complete the instal-
lation.
A42022-L5938-H52-1-76D1 75
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
1. Start SysAdmin
Start the TNMS Core/CDM SysAdmin interface via "Start” -> "Programs” -> "TNMS 9.0”
-> "System Administration”.
2. Logon
Log onto TNMS Core/CDM SysAdmin via the displayed logon dialog.
– In the field "Server", enter the name of the PC where the TNMS Core/CDM Server
is installed. If you are logging in directly to the PC where the TNMS Core/CDM Serv-
er is installed, enter ".".
– In the field "User name" enter the default value "Administrator". This account is cre-
ated automatically during the installation of TNMS Core/CDM.
– When you log on for the first time, the field "Password" does not have to be complet-
ed.
– After confirming the entry via the "Logon” button, change the password for the de-
fault administrator account as requested.
The TNMS Core/CDM Server is still deactivated at this time.
i Do not activate it until step 6 below has been completed.
76 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
8. Add NetServers
After TNMS Core/CDM installation, the NetServer computers must be linked up to the
TNMS Core/CDM via the "DCN Management” dialog.
The OSILLC protocol driver must not run on more than one ethernet card. The driver
i should therefore be disabled on any other cards using Start -> Settings -> Control Panel
-> Network -> "Network and Dial-up connections” tab on the NetServer PC.
A42022-L5938-H52-1-76D1 77
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Once you have configured NetServers, DCN channels and network elements (steps 8-
i 10), the status of these objects is shown in the "DCN Management” window.
8.2 Migration
TNMS Core/CDM 9.0 supports migration of data from TNMS Core 8.5. For data migra-
tion it is recommended to install the version 9.0 software “parallely” on a separate sys-
tem and connect it to the same LAN for easy data transfer between the two systems.
When installing the new system, keep in mind that Server and Backup Server have to
i be instaled on the same machine.
78 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
The problem can be solved by defining the sequence in which IP address information is
transmitted in the network settings for each PC as follows:
1. Right-click the icon "My Network Places" on your desktop. In the menu that appears,
select the item "Properties”.
2. In the "Network and Dial-Up Connections” window that appears, click on "Advanced”
in the toolbar, and from the list that appears select "Advanced Settings...”.
3. The "Advanced Settings” windows is now displayed. In the "Connections” list, select
"Local Area Connection”. The list beneath (called "Bindings for Local Area Connec-
tion”) will now show the preferred order in which protocols will be used.
4. Select the item "Internet Protocol (TCP/IP)” from the list and then click on the up ar-
row on the right side of the window. Do this until "Internet Protocol (TCP/IP)” is the
first item in the list under "File and Printer Sharing for Microsoft Networks”.
5. Repeat the procedure in step four for all of the other clients listed in the window.
6. After changing the settings for all of the clients listed, click on the tab titled "Provider
Order”.
7. Select the item "Microsoft Windows Network” from the "Network providers” field, and
then click on the up arrow on the right side of the screen to move it to the top of the
list.
8. Click "OK” to save the changes and then reboot the computer.
A42022-L5938-H52-1-76D1 79
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
9 System Expansion
80 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
All modules with ESD components have an outer grounding edge which is connected to
the module "ground" and which can be used when gripping the circuit board.
Modules are fully protected if they are enclosed in a shielded, unopened housing.
Nevertheless, the following basic safety precautions should always be followed when
handling ESD components:
– Always use a grounding bracelet connected to a grounding socket (see below) when
unpacking, packing, touching, unplugging or plugging modules bearing the ESD
(German EGB) symbol. This will ensure that the modules do not get damaged.
– Avoid touching the component connections, connector contacts or conductor tracks
(even if you are properly grounded).
– When unplugging and plugging modules, make sure you use the handles provided.
A42022-L5938-H52-1-76D1 81
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– If modules are only gripped by the handles for plugging/unplugging, they should not
be transported in a horizontal position (danger of breakage).
– When you remove the module from its subrack, place it on an antistatic mat.
– Make sure that all measuring equipment used is grounded.
– If you are using ungrounded measuring equipment, briefly connect the measuring
probe to ground (discharge) it before performing measurements on components and
modules.
– Ensure that the modules are installed in the correct slots.
European standard EN50082-1 contains detailed information on the correct handling of
i electrostatic-sensitive devices.
82 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
CPU: PIII, 1 GHz CPU: P4, 1.5 GHz CPU: PIII, 1 GHz
Multiprocessor operation Multiprocessor operation Multiprocessor operation
supported. supported. supported.
Memory: Memory: Memory:
2 x 512 MB 2 x 512 MB 2 x 256 MB
Hard Disk: Hard Disk: Hard Disk:
2 x 36 GB 20 GB 20 GB
Floppy Disk: Floppy Disk: Floppy Disk:
1.44 MB 1.44 MB 1.44 MB
CD-ROM drive CD-ROM drive CD-ROM drive
Ethernet card Ethernet card, 2x Ethernet card
RAID controller - -
DAT streamer for backup - -
- - PC I/O, optional
Color monitor 17” Color monitor 17” Color monitor 21”
Operating system: Operating system: Operating system:
Windows 2000 Server Windows 2000 Profes- Windows 2000 Profes-
sional sional
Tab. 11.1 Hardware Requirements for MS CDM Server, NetServer and Client
A42022-L5938-H52-1-76D1 83
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– The Client, NetServer and Server PCs should be set up and cabled in accordance
with the project-specific installation documents supplied.
– The applicable recommendations for screen-based workstations should be ob-
served.
– To guarantee 24-hour operation, an uninterrupted power supply must be available.
84 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
Server machines. Windows 2000 Server must be installed on the Server machine
and on the Client machine if Metaframe XP is installed on the Client machine also.
Installation instructions for both operating systems are provided in Chapter 4, how-
ever, pre-installed machines can also be used.
3. Windows 2000 Terminal Services:
The Windows 2000 Terminal Services component must be installed on the client
machine so that the Multi Server CDM system can be accessed remotely via
MetaFrame. More information is provided in Section 4.2.5.
4. MetaFrame XP (FR2):
MetaFrame XP is used to enable remote access to the MS CDM Client and MS CDM
SysAdmin software on the MS CDM Client machine. More information on installing
MetaFrame XP is provided in Section 5.4.
5. Internet Explorer 6.0:
This must be installed on the NetServer to enable MSN functionality, and on the cli-
ent machine. If this is not already pre-installed, it can be downloaded from the Inter-
net.
6. Multi Server CDM 9.0:
This CD contains the following software components for installation:
– Integrated Multi Server CDM software installation package:
This installation program includes the Server, NetServer, Backup Server, Client
and SysAdmin components. These can be installed either individually or together
as required.
The EML packages for USO and SNC are also available for selection during the
Multi Server CDM installation. The EML packages are installed on the Server,
NetServer and Client PC.
More information on installing Multi Server CDM is provided in Chapter 6.
As well as the Multi Server CDM installation, the following 3rd-party software
components are also included on this CD:
– Adobe Acrobat Reader:
The customer documentation for Multi Server CDM is provided in *.pdf format.
The Adobe Acrobat Reader should be installed on the Server and Client ma-
chines so that the documentation files can be opened.
– Microsoft Desktop Engine MSDE 2000 incl. Service Packs 2 and 3.:
The MSDE is installed on the MS CDM Server. More information on installing
MSDE is provided in Section 5.1. For larger configurations, however, SQL Server
2000 incl. Service Packs 2 and 3 is recommended. Contact Siemens Technical
Sales for further information.
– Microsoft XML parser:
The XML parser is installed on the client machine so that the Multi Server CDM
system can support the export and import of network configuration data in XML
format. More information on installing the XML parser is provided in Section 5.2.
– OSI stack:
If QB3 is to be used, OSI stack software must be installed on NetServer PCs be-
fore the NetServer software itself. More information on installing the OSI stack is
provided in Section 13.3.
Software CD Overview
The software will be delivered on CD-ROMs. Type and content of the necessary CDs
depends on the specific planned and delivered configuration. The operating system will
be delivered as part of the hardware, it is not included within the following table.
A42022-L5938-H52-1-76D1 85
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
MS CDM Server
MS CDM NetServer
(MS CDM SysAdmin)
1 Server/NetServer PC
86 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
The individual stages in the commissioning process must be logged using the forms
supplied for the transfer protocol. The transfer protocol documents the completeness of
the delivery, tests performed and the test results.
Installation Sequence
The system should be commissioned as follows:
1. Set up and cable the PCs, as described in Section 11.2.1 above.
2. Install the operating system and additional hardware components, and configure the
system under Windows 2000 as described in Chapter 4.
3. Install the MSDE (Microsoft Desktop Engine) on the Server and Backup Server PC,
as described in Section 5.1.
4. To enable import and export of XML data, install the XML parser MSXML 4.0 as de-
scribed in Section 5.2.
5. If QB3 is to be used, install the OSI stack on the NetServer PCs as described in
Section13.3.
6. Install the Multi Server CDM software components on the corresponding machines
as described in Chapter 6:
– MS CDM Client
– MS CDM Server
– MS CDM Netserver
– MS CDM Backup Server
– MS CDM EML Packages
– Additional TNMS software, such as PLET or the optional EML packages.
7. Configure the Multi Server CDM components and connect network objects as de-
scribed in Chapter 15.
8. Perform system testing in accordance with the test cases described in the accep-
tance test protocol. For more information, contact Siemens Technical Sales.
A42022-L5938-H52-1-76D1 87
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
88 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
This licensing method should be used if you are running several Windows 2000
Servers.
– per server:
Licensing per server requires a client access license for every simultaneous connec-
tion established to this server. This means that the corresponding Windows 2000
Server supports a fixed number of client connections. There are no additional licens-
es required for these computers. Per server licensing should be used if you are run-
ning a single Windows 2000 Server.
If you are not sure which mode to use, use per server licensing, as it is possible to switch
subsequently from "per server" to "per workplace" licensing at no extra cost.
If you want to use terminal services both for remote administration and for an application
server, use "per workplace" licensing. For the Internet Connector license of the terminal
services, however, use "per server" licensing.
A42022-L5938-H52-1-76D1 89
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
12.2.1 Installing Windows 2000 Server (If SCSI RAID is Already Configured)
If you have already configured a RAID system (see Section 3.2.2) including mirrored
disks and partitions on the MS CDM Server machine, proceed as follows:
1. Insert the ServerStart CD into the CD-ROM drive.
– Reboot the system.
90 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 91
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
92 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– If you select the "Install default components" option, the standard components are
configured by default.
– Continue with "Next”.
A42022-L5938-H52-1-76D1 93
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– Select the options "FSC Server View SNMP Agent" (if required) and "FSC Server
View".
– Complete your configuration with "leave wizard".
46. "Insert the MS Windows 2000 CD-ROM into the CD-ROM drive." window:
– Remove the ServerStart CD from the CD-ROM drive.
– Insert the MS Windows 2000 Server CD into the CD-ROM drive.
– Confirm with "OK".
94 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 95
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– Select both HD icons with the mouse. If either of the HDs has a valid partition ta-
ble, the "Adaptec Storage Manager" window appears with a corresponding mes-
sage.
– Select "Yes".
Both HDs are shown with a green tick.
– Click on "Include Drive". Both HDs must be assigned a RAID DISK icon, i.e. a
RAID1 icon must be displayed with a line pointing to each HD.
– Review the configuration and select "Done".
– Confirm the following warning messages with "OK".
Two black flags appear, one above the LSU icon and another above the RAID1 icon.
96 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
The "Array Group Information" window appears with a status field informing you
about installation progress.
– Wait until formatting has been completed and the array group has been created,
i.e. when the status field shows "optimal".
– Exit the "Adaptec Storage Manager".
– Reboot the system.
A42022-L5938-H52-1-76D1 97
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
98 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– If you select the "Install default components" option, the standard components are
configured by default.
– Continue with "Next”.
A42022-L5938-H52-1-76D1 99
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
37. "Insert the MS Windows 2000 CD-ROM into the CD-ROM drive." window:
– Remove the ServerStart CD from the CD-ROM drive.
– Insert the MS Windows 2000 Server CD into the CD-ROM drive.
– Complete your configuration with "OK".
100 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 101
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
102 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 103
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
104 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 105
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
This chapter gives installation descriptions for the necessary software to be installed pri-
or to TNMS Core and its additional components.
Uninstalling MSDE
In order to uninstall the MSDE, open Start -> Settings -> Control Panel -> Add/Remove
Programs:
– Select the MSDE from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
2. Double-click the "msxml4.msi” file in the MSXML directory on the TNMS Core 9.0
software CD.
4. In the "End-User License Agreement” window, accept the terms of the license
agreement, and press "Next” to continue.
5. In the "Customer Information” window, enter a user name and the name of your com-
pany in the appropriate fields. Press "Next” to continue.
106 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
7. The window "Installing Microsoft XML Parser and SDK” window is now displayed.
The progress of the installation is indicated by the progress bar.
8. Once the installation is complete, the window "Completing the Microsoft XML Parser
and SDK Setup Wizard” is displayed. Press "Finish” to complete the installation.
Uninstalling MSXML
In order to uninstall the MSXML, open Start -> Settings -> Control Panel -> Add/Remove
Programs:
– Select the MSXML from the software list.
– Click the "Change/Remove” button.
– Select the "Remove” option.
– Confirm the uninstall process with "Finish” and restart your computer.
3. In the "Choose Destination Location" window which is now displayed, a default in-
stallation directory is offered for the OSI stack. Press "Next” to continue.
4. In the "Please select:" window, select the NSAP address option best suited to your
company’s network and press "Next”.
5. In the "Getting NSAP" window, enter the local NSAP address and press "Next”.
6. In the "Start Copying Files" ensure that the settings displayed are correct, and if so,
press "Next” to continue.
7. A setup status window is now displayed, showing the progress of the OSI stack in-
stallation.
8. In the ”InstallShield Wizard Complete” window select the option for restarting the
computer and press “Finish” to complete the OSI stack installation.
Once the computer has rebooted, open the OSI stack via Start -> Settings -> Control
Panel -> OSI Stack.
You can now check the OSI stack settings as follows:
– Note the settings of the ES-IS and IS-IS parameters (the IS-IS parameters can be
displayed by pressing Ctrl + I).
A42022-L5938-H52-1-76D1 107
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
– Set the value for "Number of Channels and Ctx” to greater than/equal to 140. This
is the number of OSI stack connections which can be established simultaneously.
The recommended value is 500.
– Note the network interface card to which the OSI is connected and check this against
the LAN card settings in the Control Panel.
– Activate the options "Open Stack, when Operator starts” and "Start stack as ser-
vice".
In other words you must install the MetaFrame Server first, then enter the corresponding
licenses, and then publish the required applications. Only when these steps have been
completed can you install the MetaFrame Client and configure the ICA Client connec-
tion.
108 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
The MetaFrame Client PC can be any PC in the network, however, it must meet the fol-
lowing requirement:
– 250 MB disk space for ICA Client software.
When you insert the Server CD (see instructions below), you can obtain more informa-
i tion by clicking "View installation checklist".
4. In the window "Welcome to the Citrix MetaFrame XP for Windows Installation Wiz-
ard", press "Next".
5. In the "License Agreement" window, select "I accept the license agreement" and
press "Next".
6. In the "Product Family Selection" window, select "MetaFrame XPs" and press "Next".
7. In the "Select Product Type" window, select "Retail" and press "Next".
9. In the "Create or Join a Server Farm" window, select "Create a new farm" and press
"Next".
10. In the "Create a Server Farm" window, enter an appropriate "Farm Name", select
"Use a local database (Microsoft Access) on this server" and "Use Default Zone
Name", and press "Next".
A42022-L5938-H52-1-76D1 109
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
11. In the "Assign Farm Administrator Credentials" window, enter an appropriate "User
Name" (e.g. TNMS) and "Domain" description for the local domain of the MetaFrame
server host (e.g. PC170). Press "Next".
12. In the "Configure shadowing" window, select "Prohibit shadowing of ICA sessions on
this server" and press "Next".
13. In the "Configure Citrix XML Service Port" window, enter the default value "80" and
press "Next".
14. In the window "Review your selections listed below", ensure that the data shown is
correct, and press "Finish" to complete this section of the installation.
In the windows which follow, the progress of the installation is indicated by progress
bars.
15. When installation has been completed, the window "Citrix MetaFrame XP for Win-
dows, Feature Release 2 has been successfully installed" is displayed.
Ensure the options "Launching the ICA Client Distribution wizard" and "View the Re-
adme file" are not selected and close this window by pressing "Close".
16. A command prompt appears asking whether you wish to restart the computer -
press "Yes".
3. The Citrix Management Console is now shown for the MetaFrame Server farm you
have just configured. In the tree view to the left of the console, right-click "Licenses"
and select the option "Add License..." from the context menu which appears.
4. In the "Add License" dialog, enter the serial number of the server license and press
"OK".
5. In the tree view, right-click the "Licenses" option again, select "Add License...", and
in the "Add License" dialog, enter the license number for the ICA Client connection.
6. Once you have entered both licenses in this way, a command prompt appears ask-
ing you whether you wish to activate your licenses at this time - press "No".
You have a grace period of 35 days before the licenses must be activated.
110 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
Publishing Applications
The applications which the remote MetaFrame Client PC is permitted to access (e.g.
TNMS Client or TNMS SysAdmin) can be specified on the MetaFrame Server as fol-
lows:
1. In the Citrix Management Console, go to the main menu bar and select "Actions" ->
"New" -> "Published Application".
3. In the "Specify What to Publish" window, select "Application". Specify the "Com-
mand Line" by browsing to the installation directory for the relevant application and
selecting the *.exe file for the application e.g. C:\Program Files\Sie-
mens\TNMS\Bin\tnClient.EXE. You can also specify a "Working Directory" e.g.
C:\Program Files\Siemens\TNMS\Bin. Press "Next" continue.
5. In the "Specify Application Appearance" window, set the "Session Window Size" to
1024x768, and set the "Colors" to "True Color (24 bit)". Select "Maximize application
at startup" and press "Next".
6. In the "Specify ICA Client Requirements" window, select "Enable Audio", set "En-
cryption" to "Basic" and press "Next".
7. In the "Specify Servers" window, select the name of the MetaFrame Server comput-
er from the "Available Servers" list. Press "Add" to add this server to the "Configured
Servers" list, and press "Next" to continue.
8. In the "Specify Users" window, select the server name from the "Look in" field, select
the "Show users" option, and select the appropriate user from the list provided. This
user will be the user entered during the MetaFrame server installation, e.g. TNMS.
Once you have selected the user, press "Add" to add this user to the "Configured
Accounts". Press "Finish" to complete publishing for this application.
9. In the Citrix Management Console, you can now see the published application in the
tree view under "Applications".
A42022-L5938-H52-1-76D1 111
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
4. In the window "Welcome to the Citrix ICA Client Installation Wizard", press "Next".
5. In the "License Agreement" window, select "I accept the license agreement" and
press "Next".
7. In the "Select Program Folder" window, enter "Citrix ICA Client" and press "Next".
8. In the "ICA Client Name" window, enter a name for the client PC, e.g. pc109, and
press "Next".
9. In the "Select Desired Features" window, select "No" and press "Next".
10. In the window "Ready to Install the Application", press "Next" to begin installation. A
progress bar is now shown indicating the progress of the installation.
11. In the window "Citrix ICA Client has been successfully installed" click "Finish" to
complete the installation.
3. In the "Find New Application Set" window, select "Local Area Network" and press
"Next".
4. In the window which appears, enter a description for the new application set, and
select the server where the application is installed from the dropdown list "Click be-
low to locate the Application Set to add". Press "Next" to continue.
5. In the window which appears, select "Use Server Default" for the "Window Colors",
and for the "Window Size", select "Seamless Window". Press "Next" to continue.
6. In the "Program ICA Neighborhood" window, enter the user name for the MetaFrame
Server as specified during MetaFrame Server installation (e.g. TNMS). Enter the
MetaFrame Server domain as specified during MetaFrame Server installation (e.g.
PC170). Finally, specify a password, and press "OK".
112 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
8. In the Citrix Program Neighborhood, a folder is now displayed for the published ap-
plication, e.g. TNMS.
A42022-L5938-H52-1-76D1 113
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
2. In the "License Agreement" window, read the agreement and accept it by pressing
"Yes".
3. In the "Customer Information” window, enter a user name and the name of your com-
pany in the appropriate fields. Press "Next” to continue.
114 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
5. In the "Select TNMS Core Components" window, select the components you wish
to install. In this window, you can install the Server, NetServer, BackupServer, Client,
and SysAdmin components either together or individually as required (see Section
15.1 for details).
Step 6. is only performed when installing the Server. If you did not choose to install this
i component, continue with step 7.
8. In the "Select Program Folder” window, a default program folder is offered. Press
"Next” to continue. The system now registers additional installation packages.
A42022-L5938-H52-1-76D1 115
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
9. In the "Select the required EML packages" window you can select the required EML
components for installation. Press “Next” to continue.
10. In the "Select the required interface packages" window you can select the required
interface packages for installation: SNMP Proxy, TCOA Proxy G7 and/or TCOA
Proxy TMF. Then press “Next” to continue.
11. The “Start Copying Files” window shows all software components to be installed.
Press “Next” to continue.
116 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
13. The "Setup Status” window which is now displayed indicates the progress of the in-
stallation. Various system messages are also output during this part of the installa-
tion, for example indicating that LCTs are being installed.
This part of the installation could take some time.
14. Once all system components are installed, the "InstallShield Wizard Complete" win-
dow is displayed. Select the option for restarting the computer, and press "Finish” to
complete the installation.
5. Log off the TNMS SysAdmin software from the server, and exit SysAdmin.
A42022-L5938-H52-1-76D1 117
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
TNMS Backup Server, TNMS Data Provider, TNMS NetServer, TNMS Telecommu-
nication Network Management System.
You should also check the Windows Task Manager for running services and end
these processes where possible.
3. The preconditions for deinstalling are checked and a welcome window is displayed.
Select "Remove” and press "Next” to continue.
4. In the "Confirm File Deletion” window, press OK to activate deinstallation. The dein-
stallation starts and information windows displays the software parts, which are cur-
rently deinstalled. This will take some minutes.
5. Depending on the programs that have been installed you may be prompted to con-
firm the deletion of further files.
6. You will also be asked whether you wish to delete the directory containing your back-
up files:
– If you have stored the backup files in the default directory, i.e.
"C:\Program Files\Siemens\TNMS\data\Archive”, do not delete the directory.
– If you have stored the backup files in a different directory, you may delete the de-
fault directory.
7. The "Maintenance Complete” window is now displayed. If certain folders could not
be deleted, this is indicated here. Press "Finish" to complete the deinstallation pro-
cess.
10. Check that the TNMS services listed above are removed from the services list.
118 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
7. Start the installation/deinstallation procedure via Start -> Settings -> Control Panel
-> Add/Remove Programs. Select "TNMS" and click the "Change/Remove" button.
9. In the Select TNMS core components" window, the components already installed
are displayed. Select the components you wish to install or uninstall and press
"Next” to continue.
10. In the "Select the required EML packages” window, select the components you wish
to install or deinstall, and press "Next” to continue.
11. The "Setup Status” window which is now displayed indicates the progress of the pro-
cedure.
12. Once the selected components are installed or deinstalled, the "Maintenance Com-
plete" window is displayed. Select the option for restarting the computer, and press
"Finish” to complete the process.
A42022-L5938-H52-1-76D1 119
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
1. Start SysAdmin
Start the MS CDM SysAdmin interface via "Start” -> "Programs” -> "TNMS 9.0” -> "Sys-
tem Administration”.
2. Logon
Log onto MS CDM SysAdmin via the displayed logon dialog.
– In the field "Server", enter the name of the PC where the MS CDM Server is in-
stalled. If you are logging in directly to the PC where the MS CDM Server is installed,
enter ".".
– In the field "User name" enter the default value "Administrator". This account is cre-
ated automatically during the installation of Multi Server CDM.
– When you log on for the first time, the field "Password" does not have to be complet-
ed.
– After confirming the entry via the "Logon” button, change the password for the de-
fault administrator account as requested.
The Multi Server CDM Server is still deactivated at this time.
i Do not activate it until step 6 below has been completed.
120 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
8. Add NetServers
After Multi Server CDM installation, the NetServer computers must be linked up to the
Multi Server CDM via the "DCN Management” dialog.
The OSILLC protocol driver must not run on more than one ethernet card. The driver
i should therefore be disabled on any other cards using Start -> Settings -> Control Panel
-> Network -> "Network and Dial-up connections” tab on the NetServer PC.
A42022-L5938-H52-1-76D1 121
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
Once you have configured NetServers, DCN channels and subnetworks (steps 8-10),
i the status of these objects is shown in the "DCN Management” window.
15.2 Migration
Multi Server CDM 9.0 supports migration of data from Multi Server CDM 8.5. For data
migration it is recommended to install the version 9.0 software “parallely” on a separate
system and connect it to the same LAN for easy data transfer between the two systems.
When installing the new system, keep in mind that Server and Backup Server have to
i be instaled on the same machine.
122 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
– Computer B has two network adapters (one for the LAN segment to computer A and
one for an external LAN segment)
Because computer B has two network adapters, it also has two IP addresses.
When establishing communication with computer A, computer B transmits both IP ad-
dresses. If the first IP address sent by computer B is the address for the common LAN
segment, communication can be established without any problems. But if the first IP ad-
dress sent by computer B is the address for the external LAN segment, and a gateway
computer with routing information is not available, timeout cycles will result in delayed
communication.
The following connections may then be affected:
The problem can be solved by defining the sequence in which IP address information is
transmitted in the network settings for each PC as follows:
1. Right-click the icon "My Network Places" on your desktop. In the menu that appears,
select the item "Properties”.
2. In the "Network and Dial-Up Connections” window that appears, click on "Advanced”
in the toolbar, and from the list that appears select "Advanced Settings...”.
3. The "Advanced Settings” windows is now displayed. In the "Connections” list, select
"Local Area Connection”. The list beneath (called "Bindings for Local Area Connec-
tion”) will now show the preferred order in which protocols will be used.
4. Select the item "Internet Protocol (TCP/IP)” from the list and then click on the up ar-
row on the right side of the window. Do this until "Internet Protocol (TCP/IP)” is the
first item in the list under "File and Printer Sharing for Microsoft Networks”.
5. Repeat the procedure in step four for all of the other clients listed in the window.
6. After changing the settings for all of the clients listed, click on the tab titled "Provider
Order”.
7. Select the item "Microsoft Windows Network” from the "Network providers” field, and
then click on the up arrow on the right side of the screen to move it to the top of the
list.
8. Click "OK” to save the changes and then reboot the computer.
A42022-L5938-H52-1-76D1 123
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
124 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
A42022-L5938-H52-1-76D1 125
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
126 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
17 Abbreviations
CE Communauté Européenne
DAT Digital Audio Tape ,
DHCP Dynamic Host Configuration Protocol ,
DLL Dynamic Link Library ,
DNS Domain Naming Service ,
EML Element Management Layer ,
EMOS Element Manager Operating System
EMS Element Management System
EN European Norm ,
ESD Electrostatic Discharge ,
IMN Installation Manual
JRE JAVA Runtime Environment. ,
LAN Local Area Network
LSU Load/Store Unit ,
MDAC Microsoft Data Access Components
MS CDM Multi Server Cross Domain Manager
MSDE Microsoft Desktop Engine ,
MSN Multi Service Node
OLE Object Linking and Embedding ,
OS Operating System ,
OSI Open System Interconnection
PC Personal Computer
PCI Peripheral Component Interconnect ,
PDH Plesiosynchronous Digital Hierarchy
PLET Performance Log Export Tool
RAID Redundant Arrays of Independent Disks ,
RPR Resilient Packet Ring
SCSI Small Computer System Interface ,
SNC Subnetwork Connection
SNMP Simple Network Management Protocol
SW Software ,
TCOA TMF CORBA Agent
TCOM TMF CORBA Manager
TED Technical Description
TNMS Telecommunication Network Management
System
UNO Universal Network Object
USO Universal Subnetwork Object
WAN Wide Area Network
WINS Windows Internet Naming Service ,
A42022-L5938-H52-1-76D1 127
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
128 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
18 Index
Symbols UNO 13
@P proxy 14 USO 85
Waveline 14
EMOS 13
A
ESD symbol 9, 81
Additional clients 80, 125
Additional hardware 33, 103
G
Additional NetServers 80
Additional TNMS components Grounding bracelet 9, 81
Installation 48, 118
Adobe Acrobat Reader 13, 85 H
Antistatic mat 9, 82 Hardware recommendations 11, 83
Mirror disks 12, 84
B Operating system 11, 83
Basic information 7 Standalone system 11, 83
Commissioning 7 Standby server 12, 84
Personnel requirements 7 Uninterruptible power supply 12, 84
Hummingbird Exceed 14
C
I
Cabling 12, 84
CE conformity 7 Initial configuration
Commissioning 11, 83 Multi Server CDM 120
Basic information 7 TNMS Core 76
Final tasks 76, 120 Installation
Hardware recommendations 11, 83 Additional TNMS components 48, 118
Installation and cabling 12, 83 Licensing 18, 88
Installation sequence 16, 87 MetaFrame 37, 108
Mirror disks 12, 84 MSDE 35, 106
Preparation 11, 83 MSN 73
Software recommendations 12, 84 Multi Server CDM 114
Standby server 12, 84 Operating system 18, 88
Uninterruptible power supply 12, 84 OSI stack 36, 107
PLET 72
ServerStart 19, 25, 90, 95
D
TCOA 3rd-party software 52
Deinstallation TCOA proxy 51
Multi Server CDM 117 TCOM 3rd-party software 58
TCOA 3rd-party software 56 Terminal services 33, 103
TCOM 3rd-party software 61 Third-party software 35, 106
TNMS Core 46 TNMS Core 43, 51
DHCP 19, 89 Waveline 72
DNS 19, 89 Windows 2000 Professional 30, 101
Windows 2000 Server 19, 25, 90, 95
E Windows 2000 Service Pack 3 33, 103
Electrostatic-sensitive devices 9, 81 XML parser 35, 106
ELI 13 Installation and cabling 12, 83
EML packages Installation sequence 16, 87
ELI 13 Installation software 12, 84
EMOS 13 @P proxy 14
PDH 13 Adobe Acrobat Reader 13, 85
QB3M 13 EML packages 13, 85
SNC 85 Hummingbird Exceed 14
SNMP 13 Internet Explorer 13, 85
A42022-L5938-H52-1-76D1 129
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
L S
Licensing 18, 88 Safety precautions 9, 81
MetaFrame 39, 110 Antistatic mat 9, 82
Electrostatic-sensitive devices 9, 81
ESD symbol 9, 81
M
Grounding bracelet 9, 81
Measures after commissioning 76, 120 Labeling 9, 81
Initial configuration 76, 120 Measuring equipment 9, 82
Routing settings 79, 122 Modules 9, 81
Measuring equipment 9, 82 Voltage 9, 81
MetaFrame 13, 85 ServerStart software 12, 19, 25, 84, 90, 95
Configuring the ICA client connection 41, 112 Setup options
Installation 37, 108 TCOA 3rd-party software 56
Installing the MetaFrame Client 40, 111 SNC 85
Installing the MetaFrame Server 38, 109 SNMP 13
Licenses 39, 110 Software recommendations 12, 84
Publishing applications 39, 111 Standby Server 12, 84
System requirements 37, 108 Supplementary documentation 7
Microsoft Desktop Engine 13, 85 Delivery notes 7
Mirror disks 12, 84 Field test protocols 7
Modules 9, 81 Planning documents 7
MSDE System
Installation 35, 106 Standalone 11, 83
MSN 13 System expansion 80, 125
Installation 73 Additional clients 80, 125
Multi Server CDM Additional NetServers 80
Deinstallation 117
Initial configuration 120
T
Installation 114
TCOA 3rd-party software
Deinstallation 56
O
Installation 52
Operating system Setup options 56
Installation 18, 88 TCOA proxy 14
OSI stack 13
130 A42022-L5938-H52-1-76D1
Installation Installation Manual (IMN)
TNMS Core/CDM 9.0
Installation 51
Third-party software 51
TCOM 14
Configuration tool 63
DCN management configuration 69
EML server setup 65
Third-party software 57
TCOM 3rd-party software
Deinstallation 61
Installation 58
Terminal services 13, 85
Installation 33, 103
Third-party software
Installation 35, 106
MetaFrame 37, 108
MSDE 35, 106
OSI stack 36, 107
TCOA proxy 51
TCOM 57
XML parser 35, 106
TNMS Core
Deinstallation 46
Initial configuration 76
Installation 43, 51
U
Uninterruptible power supply 12, 84
UNO 13
USO 85
W
Waveline 14
Installation 72
Windows 2000 13, 84
Hardware configuration 33, 103
Windows 2000 Professional
Installation 30, 101
Windows 2000 Server
Installation 19, 25, 90, 95
Windows 2000 Service Pack 3
Installation 33, 103
WINS 19, 89
X
XML parser 13, 85
Installation 35, 106
A42022-L5938-H52-1-76D1 131
Installation Manual (IMN) Installation
TNMS Core/CDM 9.0
132 A42022-L5938-H52-1-76D1