Greenslade & Company Inc. ced
Fastener Inspection Equipment
Innovative Gage Design
Dimensional Calibration
STF-87114
Recess Torsional Strength Tester
This device is suitable for testing #6 through 14” screws according to MIL-S-87114A
and other similar specifications. This tester comes with an adjustable weight stack,
that can be set from Slbs through 45lbs in 5lb increments. The end load pressure is
not affected when the torque is applied. The required torque wrenches must be pur-
chased separately. Now available as an add-on accessory to our STF-250.
NOTES: (a) The test fixture shouldbe firmly secured toa workbench by fastening it
through the 4 holes inthe base ofthe tester. (b the screw rotates inthe chuck
before the recess distorts or disengages grind three flats onthe test screws at approx-
imately 120 degrees apart to provide a greater resistance to rotation inthe chuck.
2234 Wenneca Ave, Fort Worth, TX 76102 ph:817-870-8888 fx: 817-870-9199
www greensladeandcompany.com / sales@greensladeandcompany.com