Machine Name: (veo
Configuration directory: ~JemeZicorfigs VSO
25 configuration: XYZ =
Machine units Inch S
Driver characteristics: (Multiply by 1000 for times specified in is or microseconds)
Additional signal coneitioning or isolation such as optocouplars and RC fiters
can impose timing constraints of their ovm, in addition to those of the driver.
brver type other ei
Stop Tne 5000
Step Space 5000 [= )ns
Direction Hold: 20000 [E)ns
Cree eset 20000 [Ens
Parport Base Address: [0x378 Min Base Period: 30000 ns
Latency test result: 15000 [Ens Maxsteprate: 33333 Hz
Mf Onscreen prompt for tool chengeCutputs (PC to Mill) Invert Inputs (Millto PC) Invert
Pin 1: | Unused
=|
a
Pin 2: [x step Pin 11; Unused S
a
Q
Qa
a
Pin 2: |X Direction
Pin a: |v Step
Pin 13; Unused
Pin 15) Unused
@ Include custom PYUCP Panel
Pin 5: | Direction
Pin 6: [Z step
Pin 2: | Z Direction
Pin g: | Unused Mf Include custom HAL configuration
Pin 9: [Unused
Bin 14, Unused (Output pinout presets:
{ ‘Sherline Outputs
Xylotex Outputs
Pin 10 Unused
ooo00o0@oOoseoeod
Pin 174 Unused‘Motor steps per revolution:
Driver Microstepping
Pulley teeth (MotoriLeedscrew)
Leadscrew pitch,
Maximum velocity:
Maximum Acceleration:
Home lacation:
Table travel:
Home Switch location:
Home Search velocity
Horne Latch direction:
Time to accelerate to max speed:
Distance to accelerate to max speed:
Pulse rate at max speed:
‘Axis SCALE
60.0
200
(oo
(os
revrin
po
fo
jo
———
a
inyst
-0[24.0
0.07008
0.1470in
2400.0H2
2000.0