p
BHU vay of etn @ Thay
Department of Textile Engineering
INTERNSHIP REPORT
(Industrial Attachment at Crystal Composite Ltd.)
Supervised by:
Md. Ramij Howlader
Lecturer
Department of Textile Engineering
BGMEA University of Fashion & Technology
By
Noorul Islam Saiful
ID: 132-071-0-155
Batch: 132 TE-2
September 2017
MB. BCMEA Universtiy of Fashion & TedindlogyDeclaration
1, Noorul Islam Saiful, hereby declare that the presented report of intemship titled
“Industrial Training” is uniquely prepared by me after the completion of 6th weeks work at
Crystal Composite Ltd. in Khejur Bagan, Saver.
also confirm that, the report is only prepared for my academic requirement not for any other
purpose. It might not be used with the interest of opposite party of the corporation.
Noorul Islam Saiful
ID- 132-071-0-155
B.Sc. in Textile Engineering
Department of Textile Engineering
BGMEA University of Fashion & Technology
MB. BCMEA Universtiy of Fashion & TedindlogyLetter of Transmittal
Date: October 2017
To
Md Ramij Howlader
Lecturer
Department of Textile Engineering
BGMEA University of Fashion & Technology (BUFT)
Uttara, Dhaka- 1230
Sub: Submis
mn of Internship report.
Dear Sir,
With due respect, I’m the students of Textile Engineering, BGMEA University of Fashion &
Technology (BUFT) have successfully completed my industrial training program. In this
stage I'm submitting my internship report on “Crystal Composite Ltd.’* as part of my B.
Se. In Textile Engineering Requirement that bears three credit hours. I'm submitting this
report for my academic purpose only.
I therefore, hope that you would be kind enough to evaluate this dissertation with my valued
ncerely yours
Nooru! Islam Saiful
ID: 132-071-0-155
MB. BCMEA Universtiy of Fashion & Tedindlogy