Schedule No.2 Plant and Mandatory Sparepart Supplied

You might also like

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 56

Item Description Quantity

1 150/20 kV power transformers and auxiliaries


150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
1.1 and supporting structure for mounting 150 kV and 20 kV NCT.
1 unit
Single phase neutral CT for 20 kV side Class PX, 2000-1000/5 A complete with clamps
1.2 for restricted earth fault protection suitable for mounting outdoor on transformer
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

1 unit
Single phase neutral CT for 20 kV side Class 10P20, 300/5 A complete with clamps for
1.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or
can be put inside the 20 kV neutral earthing resistor cubicle.

1.4 20 kV stainless steel neutral earthing resistor rated 40 ohms, 30 seconds 1 unit
Total Price Item 1
2 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power 1 set
2.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 200 m)
20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle - set
- Auxiliary Transformer Cubicle - sets
- Outgoing Feeder Cubicle 4 sets
2.2
- Bus Section With Power Cable Connection Facilities - set
- Interface Cubicle With Power Cable Connection Facilities - set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities 1 set
Including single rate tariff metering kwh-meter for incoming feeder
Dismantling Power Transformer, Power Cable, Control Cable, Neutral Earthing 1 lot
2.3 Resistor and Accessories, etc to the appropriate substation site location

Total Price Item 2


3 TEST AND COMMISSIONING 1 lot
Total Price Item 3

Grand Total Price Item 1-3


Unit Price EXW Total EXW Price Sales Tax Total Price

318,443,300 318,443,300

556,447,300 556,447,300

353,731,800 1,414,927,200

176,865,900 176,865,900

2,466,683,700

2,466,683,700
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
1.1
Consis of : Post Steel Structure 4 sets
Beam Steel Structure 4 sets

1.2 Double busbar scheme the size equal as existing branch conductor to complete the 1 bay
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified 1 bay

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as 1 bay
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 1 bay
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bay
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

2.4 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

2.5 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

2.6 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150 A, complete with clamps and 1 set
supporting structure for trafo bay

2.7 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/1 A, Class PX for main transformer protection
CORE 2 : 150-300/1 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/1 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/1 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.8 counter and leakage current 3 unit

2.9 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- EthernetSwitch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.10 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 Interface & Intergration with existing busbar protection 1 lot


2.12 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

2.13 Integration and data mapping of IED new transformer bay and existing bays to 1 lot
gateway, include point to point test between remote substation to control center

2.14 Gateway 1 set


2.15 Modem 2 sets
2.16 Global Positioning System equipment complete Antenna 1 set
2.17 Ethernet Switch Substation level 1 set
2.18 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.19 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.2 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.21 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
3.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.
Single phase neutral CT for 20 kV side class 10P20, 300/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/1 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 40 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - set
- Outgoing Feeder Cubicle 8 set
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
4.3 interface cubicle, including cable terminations and accessories for connection 1 set
between sets of 20 kV switchgear to complete the specified scope of work. (Total
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 4
5 TEST AND COMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 210,408,800
34,860,100 139,440,400
55,522,100 55,522,100

9,734,000 9,734,000

127,476,500 127,476,500

13,869,400 13,869,400

556,451,200

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

3,956,200 11,868,600

154,042,513 154,042,512.51
290,084,922 290,084,922.36

40,115,994 40,115,994.12
158,123,401 158,123,401.47

include

200,604,558 200,604,557.66
36,676,787 73,353,574.81
113,698,044 113,698,044.35
73,353,576 73,353,576.17

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,639,435,083
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,822,873,683
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


1.1 Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
Consis of : Post Steel Structure 1 set
Beam Steel Structure 3 set

1.2 Double busbar scheme the size equal as existing branch conductor to complete the - bay
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the - bay
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified - bay

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as - bay
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 1 bay
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bay
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

2.4 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

2.5 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

2.6 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150 A, complete with clamps and 1 set
supporting structure for trafo bay

2.7 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.8 counter and leakage current 3 units

2.9 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- EthernetSwitch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.10 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 Interface & Intergration with existing busbar protection - lot


2.12 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

2.13 Integration and data mapping of IED new transformer bay and existing bays to 1 lot
gateway, include point to point test between remote substation to control center

2.14 Gateway 1 set


2.15 Modem 2 sets
2.16 Global Positioning System equipment complete Antenna 1 set
2.17 Ethernet Switch Substation level 1 set
2.18 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.19 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.2 Training for Engineer & Operator for 0(six) Substation - lot
- Operator : 0 man x 0 days
2.21 Marshalling kiosk for 150 kV Trafo Bay 1 set
LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.22 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories
3.1 and supporting structure for mounting 150 kV and 20 kV NCT. 1 set
Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - set
- Outgoing Feeder Cubicle 8 set
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
4.3 interface cubicle, including cable terminations and accessories for connection 1 set
between sets of 20 kV switchgear to complete the specified scope of work. (Total
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 4
5 TEST AND COMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 52,602,200
34,860,100 104,580,300

9,734,000 9,734,000

127,476,500 127,476,500

13,869,400 13,869,400

308,262,400

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

3,956,200 11,868,600

154,042,513
290,084,922 290,084,922

158,123,401 158,123,401

include

200,604,558 200,604,558
36,676,787 73,353,575
113,698,044 113,698,044
73,353,576 73,353,576

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,599,319,689
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,534,568,889
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


1.1 Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
Consis of : Post Steel Structure 4 sets
Beam Steel Structure 6 sets

1.2 Double busbar scheme the size equal as existing branch conductor to complete the 1 bay
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified 1 bay

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as 1 bay
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 1 bay
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bay
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

2.4 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 units

2.5 150 kV 3 Phase Disconnecting switch motor operated 50 kA 1600 A without earthing 2 bay
switch complete with clamps and supporting structure for trafo bay

2.6 150 kV 3 Phase SF6 Circuit Breaker 50 kA 4000A, complete with clamps and 1 set
supporting structure for trafo bay

2.7 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.8 counter and leakage current

2.9 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.10 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 Interface & Intergration with existing busbar protection 1 lot


2.12 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

2.13 Integration and data mapping of IED new transformer bay and existing bays to 1 lot
gateway, include point to point test between remote substation to control center

2.14 Gateway 1 set


2.15 Modem 2 sets
2.16 Global Positioning System equipment complete Antenna 1 set
2.17 Ethernet Switch Substation level 1 set
2.18 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.19 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.2 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.21 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
3.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.
Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle 1 sets
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
Total Price Item 4
5 TEST AND COMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 210,408,800
34,860,100 209,160,600
55,522,100 55,522,100

9,734,000 9,734,000

127,476,500 127,476,500

13,869,400 13,869,400

626,171,400

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

154,042,513 154,042,513
290,084,922 290,084,922

40,115,994 40,115,994
158,123,401 158,123,401

200,604,558 200,604,558
36,676,787 73,353,574
113,698,044 113,698,044
73,353,576 73,353,576

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,627,567,083
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200
217,681,100 217,681,100
353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

4,731,927,600

6,985,666,083
Item Description Quantity

1 150 kV TRAFO BAY : 1 BAY(S)


1.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

1.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

1.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

1.4 150 kV post insulator complete with clamps and supporting structure for dopper to - units
bus disconnector

1.5 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

1.6 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

1.7 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150A, complete with clamps and 1 set
supporting structure for trafo bay

1.8 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
1.9 counter and leakage current 3 units

1.1 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

1.11 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

1.12 Interface & Intergration with existing busbar protection - lot


Integration and Data Mapping of IED new transformer bay to SAS existing (Siemens
1.13 SAS) 1 lot

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
1.14 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

1.15 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
1.16 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 1
2 150/20 kV POWER TRANSFORMER AND AUXILIARIES
150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories
2.1 and supporting structure for mounting 150 kV and 20 kV NCT. 1 set

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
2.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
2.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/1 A complete with clamps
2.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
2.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 2
3 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
3.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
3.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - sets
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 2 set
- Interface Cubicle With Power Cable Connection Facilities 2 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
interface cubicle, including cable terminations and accessories for connection
3.3 between sets of 20 kV switchgear to complete the specified scope of work. (Total 2 set
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 3
4 TEST AND COMISSIONING 1 lot
Total Price Item 4
Grand Total Price Item 1-4
Unit Price EXW Total EXW Price Sales Tax Total Price

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

3,956,200 11,868,600

154,042,513 154,042,513

290,084,922 290,084,922
308,860,887 308,860,887

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,289,047,422

318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 761,883,800
183,668,400 367,336,800

112,740,300 225,480,600

5,304,337,400
6,593,384,822
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


1.1 Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
Consis of : Post Steel Structure 1 sets
Beam Steel Structure 1 sets

1.2 Double busbar scheme the size equal as existing branch conductor to complete the 2 bay
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the 2 bay
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified 2 bay

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as 2 bay
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 2 bay
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bay
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

2.4 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

2.5 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

2.6 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150A, complete with clamps and 1 set
supporting structure for trafo bay

2.7 150 kV Current transformer for trafo bay complete with clamps and supporting 3 Units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.8 counter and leakage current 3 units

2.9 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.10 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 Interface & Intergration with existing busbar protection 1 lot


2.12 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

2.13 Integration and data mapping of IED new transformer bay and existing bays to 1 lot
gateway, include point to point test between remote substation to control center

2.14 Gateway 1 set


2.15 Modem 2 sets
2.16 Global Positioning System equipment complete Antenna 1 set
2.17 Ethernet Switch Substation level 1 set
2.18 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.19 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.2 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.21 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
3.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.
Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - sets
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
4.3 interface cubicle, including cable terminations and accessories for connection 1 set
between sets of 20 kV switchgear to complete the specified scope of work. (Total
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 4
5 TEST AND COMMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 52,602,200
34,860,100 34,860,100
55,522,100 111,044,200

9,734,000 19,468,000

127,476,500 127,476,500

13,869,400 13,869,400

359,320,400

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

3,956,200 11,868,600

154,042,513 154,042,513
290,084,922 290,084,922

97,287,437 97,287,437
316,246,803 316,246,803

200,604,558 200,604,558
36,676,787 73,353,575
113,698,044 113,698,044
73,353,576 73,353,576

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,854,730,528
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,841,037,728
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


1.1 Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
Consis of : Post Steel Structure 3 sets
Beam Steel Structure 3 sets

1.2 Double busbar scheme the size equal as existing branch conductor to complete the - bays
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the - bays
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified - bays

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as - bays
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 1 bays
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bays
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified
150 kV post insulator complete with clamps and supporting structure for dropper to
2.4 bus disconnector - units

2.5 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

2.6 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

2.7 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150A, complete with clamps and 1 set
supporting structure for trafo bay

2.8 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.9 counter and leakage current 3 units

2.1 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.12 Interface & Intergration with existing busbar protection - set

2.13 Integration and data mapping of IED new transformer bay to SAS existing (Siemens 1 lot
SAS)

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.14 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.15 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.16 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories
3.1 and supporting structure for mounting 150 kV and 20 kV NCT. 1 set

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - sets
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
interface cubicle, including cable terminations and accessories for connection
4.3 between sets of 20 kV switchgear to complete the specified scope of work. (Total 1 set
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 4
5 TEST AND COMMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 157,806,600
34,860,100 104,580,300

9,734,000 9,734,000

127,476,500 127,476,500

13,869,400 13,869,400

413,466,800

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400
3,956,200 11,868,600

154,042,513 154,042,513

290,084,922 290,084,922

308,860,887 308,860,887

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,289,047,422
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,329,501,022
Item Description Quantity

1 150 kV TRAFO BAY : 1 BAY(S)


1.1 150 kV Current transformer for trafo bay complete with clamps and supporting 3 units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
LV power cable, control cable and accecories, necessary equipment (MCB, cable
1.2 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 1
2 150/20 kV POWER TRANSFORMER AND AUXILIARIES
2.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
2.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
2.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or - unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
2.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
2.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. - set
Total Price Item 2
3 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
tranformer and 20 kV incoming cubicle, including cable support, 20 kV post
3.1 insulators, metal bars, cable terminations and accessories, cable rack etc.. to 1 set
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
3.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle 1 set
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
Dismantling Power Transformer, Power Cable, Control Cable, Neutral Earthing
3.3 Resistor and Accessories, etc to the appropriate substation site location 1 lot

Total Price Item 3


4 TEST AND COMMISSIONING 1 lot
Total Price Item 4

Grand Total Price Item 1-4


Unit Price EXW Total EXW Price Sales Tax Total Price

4,498,800 13,496,400

374,429,200 374,429,200

387,925,600

318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200
217,681,100 217,681,100
353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400
4,731,927,600

5,119,853,200
Item Description Quantity

1 STEEL STRUCTURES, BUSBAR, EARTHING


1.1 Galvanised steel structure (gantries) to complete the spesified scope of work for
outdoor switcyard:
Consis of : Post Steel Structure 3 sets
Beam Steel Structure 4 sets

1.2 Double busbar scheme the size equal as existing branch conductor to complete the 1 bay
specified scope of work

1.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
main busbar as specified
150 kV single suspension string insulator set complete with fitting for installation of
1.4 the main busbar as specified 1 bay

1.5 Set of clamps, connectors and accessories for instalation of the main busbar as 1 bay
specified

1.6 Set of conductor for shield wire and accessories for instalation of the main busbar as 1 bay
specified

Substation earthing grid 40 kA level comprising equipment and material to complete


1.7 the scope of work for substation earthing grid and earthing circuit required such as 1 bay
copper conductor, rods, clamps and connectors for connection to main substation
earthing circuit and to individual item of equipment and structures

1.8 Miscellaneous equipment and material to complete the scope of work for substation 1 lot
equipment
Total Price Item 1
2 150 kV TRAFO BAY : 1 BAY(S)
2.1 Bare aluminium conductor of 1 x AAC 630 sqmm/phase for 3-phase fly bus and 1 bay
conductor of trafo bay

2.2 150 kV single suspension string insulator set complete with fitting for installation of 1 bay
the trafo bay as specified

2.3 150 kV single tension string insulator set complete with fitting for installation of the 1 bay
trafo bay as specified

2.4 Set of clamps, connectors and accessories for instalation of the trafo bay as specified 1 bay

2.5 150 kV 3 Phase Disconnecting switch motor operated 40 kA 1600 A without earthing 2 sets
switch complete with clamps and supporting structure for trafo bay

2.6 150 kV 3 Phase SF6 Circuit Breaker 40 kA 3150A, complete with clamps and 1 set
supporting structure for trafo bay

2.7 150 kV Current transformer for trafo bay complete with clamps and supporting 3 Units
structure comprising:
CORE 1 : 150-300/5 A, Class PX for main transformer protection
CORE 2 : 150-300/5 A, 30 VA Class 5P20 + Class 0.5 for back up protection, metering,
instrument & control devices
CORE 3 : 2000-4000/5 A, Class PX for check bus zone protection
CORE 4 : 2000-4000/5 A, Class PX for main bus bar protection
150 kV Lightning arrester, 10 kA complete with supporting structure, clamp, surge
2.8 counter and leakage current 3 units

2.9 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.10 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.11 Interface & Intergration with existing busbar protection - set


2.12 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

2.13 Integration and data mapping of IED new transformer bay and existing bays to 1 lot
gateway, include point to point test between remote substation to control center

2.14 Gateway 1 set


2.15 Modem 2 sets
2.16 Global Positioning System equipment complete Antenna 1 set
2.17 Ethernet Switch Substation level 1 set
2.18 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
2.19 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

2.2 Marshalling kiosk for 150 kV Trafo Bay 1 set


LV power cable, control cable and accecories, necessary equipment (MCB, cable
2.21 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 2
3 150/20 kV POWER TRANSFORMER AND AUXILIARIES
3.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
3.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.
Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
3.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
3.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
3.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 3
4 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
4.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Auxiliary Transformer Cubicle - set
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder
4 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
4.3 interface cubicle, including cable terminations and accessories for connection 1 set
between sets of 20 kV switchgear to complete the specified scope of work. (Total
cable lenght is approx. 4 x 3 x 100 m)
Total Price Item 4
5 TEST AND COMMISSIONING 1 lot
Total Price Item 5

Grand Total Price Item 1-5


Unit Price EXW Total EXW Price Sales Tax Total Price

52,602,200 157,806,600
34,860,100 139,440,400
55,522,100 55,522,100

9,734,000 9,734,000

127,476,500 127,476,500

13,869,400 13,869,400

503,849,000

31,742,600 31,742,600

16,910,100 33,820,200

4,498,800 13,496,400

3,956,200 11,868,600

154,042,513 154,042,513
290,084,922 290,084,922

158,123,401 158,123,401

200,604,558 200,604,558
36,676,787 73,353,575
113,698,044 113,698,044
73,353,576 73,353,576

13,869,400 13,869,400

56,832,700 56,832,700
374,429,200 374,429,200

1,599,319,689
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200

353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,730,155,489
Item Description Quantity

1 150/20 kV POWER TRANSFORMER AND AUXILIARIES


1.1 150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
1.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
1.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or - unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/5 A complete with clamps
1.4 for restricted earth fault protection suitable for mounting outdoor on transformer - unit
tank.
1.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. - set
Total Price Item 1
2 20 KV SWITCHGEAR & POWER CABLES
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
2.1 tranformer and 20 kV incoming cubicle, including cable support, 20 kV post 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work. (Total cable lenght 4 x 3 x 75 m)
2.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle (include three inuts of 3 core CT) - set
- Busbar PT + Earthing Switch Cubicle - set
- Auxiliary Transformer Cubicle - set
- Outgoing Feeder Cubicle - sets
- Bus Section With Power Cable Connection Facilities - set
- Interface Cubicle With Power Cable Connection Facilities - set
- Bus Section Without Power Cable Connection Facilities - set
- Interface Cubicle Without Power Cable Connection Facilities - set
Including single rate tariff metering kwh-meter for incoming feeder

2.3 Dismantling Power Transformer, Power Cable, Control Cable, Neutral Earthing 1 lot
Resistor and Accessories, etc to the appropriate substation site location
Total Price Item 2
3 TEST AND COMMISSIONING 1 lot
Total Price Item 3

Grand Total Price Item 1-3


Unit Price EXW Total EXW Price Sales Tax Total Price

318,443,300 318,443,300

318,443,300

318,443,300
Item Description Quantity

1 150 kV GIS TRANSFORMER BAYS,comprising : (1 set)


3 phase busbar conductor 2000A, 40 kA, 1 sec - double busbar (refer to single line
1.1 1 set
diagram)
1.2 Interface busbar conductor 2000A, 40 kA 1 set
3 phase circuit breaker, 1250A, 40 kA symmetrical, short circuit current for 1 sec, with
1.3 1 set
3phase driving mechanism

1.4 3 phase busbar disconnector 1250A, 40 kA, 1 sec, with 3phase driving mechanism 2 sets

1.5 3 phase high speed earthing switch 2 sets


1.6 3 phase maintenance earthing switch 1 set
1.7 3 phase GIS current transformer comprising: 1 set
- Class X ratio 150-300 / 1A for main protection (transformer biased differential
protection and REF protection)
- Class 5P20+0.5 ratio 150-300 / 1A, 30 VA min, for back up protection (breaker fail,
o/c and elf prot.
- Class 0.5 ratio 150-300 / 1A, 30 VA min, for instrument and metering 1 set
1.8 3 phase GIS current transformer comprising: 1 set
- Class X ratio 2000 / 1A for main bus zone protection
- Class X ratio2000 / 1A for check bus zone protection 1 set
GIS Cable end box suitable for terminating 3 single ore 400 sqmm Cu 150 kV XLPE
1.9 1 set
cable
1.1 Local Control Panel at GIS room, each comprising: 1 set
- 1 Mimic Diagram
- 1 Local / Remote Switch
- 5 Discrepancy Switch
- 1 - Gas Monitoring Equipment
- 1 - Cable Marshalling Board
1.11 Interface & Intergration with busbar protection 1 lot
1.12 CONTROL CUBICLE FOR TRANSFORMER COMPRISING: 1 set
- Ethernet Switch for Inter-bay system
- IED Bay Control (BCU)
- IED Automatic Voltage Regulator Phase R, S, & T (AVR RST)
- Bay Control imic

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

1.13 PROTECTION CUBICLE FOR TRANSFORMER COMPRISING: 1 set


- Ethernet Switch for Inter-bay system
- IED Main Protection (MPU) - Transformer Differential loow impedance, REF 150 kV
& REF 20 kV low impedance
- IED Backup Preotection 1 (BPU 1) - Over Current & Ground Fault 150 kV side
- IED Backup Preotection 2 (BPU 2) - Over Current & Ground Fault 20 kV side,
Thermal overload, Standby Earth Fault

- Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
cables, clamps, connectors, connection to individual item of equipment, terminals,
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

1.14 IED I/O Cubicle for existing bays 150 kV comprising: 1 lot
- IED I/O Equipment for scada existing bays (refer to the single diagram of existing
substation)
- Necessary wiring/cable connectionand interface terminal to the IED I/O equipment
of existing bays.

Integration and data mapping of IED new transformer bay and existing bays to
1.15 1 lot
gateway, include point to point test between remote substation to control center

1.16 Gateway 1 set


1.17 Modem 2 sets
1.18 Global Positioning System equipment complete Antenna 1 set
1.19 Ethernet Switch Substation level 1 set
1.2 Dismantling of existing RTU (ex. Alstom-EPC 3200) 1 set

Miscellaneous equipment, test block, rack cabinet, optical cables and cord, control
1.21 cables, clamps, connectors, connection to individual item of equipment, terminals, 1 lot
auxiliary relay, interior lamp, heater,.. etc to complate the scope of works.

LV power cable, control cable and accecories, necessary equipment (MCB, cable
1.22 ladder, clamp, cable lug, terminal, etc.) and LV panel (if needed) for trafo bay to 1 set
complate the specified scope of work
Total Price Item 1
2 150/20 kV POWER TRANSFORMER AND AUXILIARIES
150/20 kV, 60 MVA 3-Phase power transformer complete with necessary accessories
2.1 1 set
and supporting structure for mounting 150 kV and 20 kV NCT.

Single phase neutral CT for 20 kV side class PX, 2000-1000/5 A complete with clamps
2.2 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank or can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class 10P20, 25/5 A complete with clamps for
2.3 neutral earth fault protection suitable for mounting outdoor on transformer tank or 1 unit
can be put inside the 20 kV neutral earthing resistor cubicle.

Single phase neutral CT for 20 kV side class PX, 150-300/1 A complete with clamps
2.4 for restricted earth fault protection suitable for mounting outdoor on transformer 1 unit
tank.
2.5 20 kV stainless steel neutral earthing resistor rated 500 Ohms, 30 seconds. 1 set
Total Price Item 2
3 150 kV CABLE CONNECTION FROM GIS TO TRANSFORMER
150 kV single core XLPE cable 400 sqmm Al conductor for 3 Phase connection
3.1 1 set
between GIS cable end box and transformer cable end box, 1 core perphase
The cable length is approximately = 1 x 60 m
Cable end box/cable sealing end, cable support, clamps, connectors and accessories
3.2 for item 3.1 at the GIS for proper connection between GIS and 150 kV XLPE cables, 3 1 set
phase set
Cable termination/cable end box, cable support, clamps, connectors and accessories
3.3 for item 3.1 at the power transformer for proper connection between power 1 set
transformer and 150 kV XLPE cables, 3 phase set
Total Price Item 3
4 20 KV SWITCHGEAR, POWER CABLES, REMOTE CONTROL CUBICLE
4 x 630 SQMM ALU 20 kV XLPE power cable/phase between 150/20 kV power
tranformer and 20 kV incoming cubicle, including cable support, 20 kV post
4.1 1 set
insulators, metal bars, cable terminations and accessories, cable rack etc.. to
complete scope of work.
(Total cable lenght is approx. 4 x 3 x 75 metres)
4.2 20 kV Indoor Metalclad Switchgear Single-Busbar Scheme Comprising:
- Incoming Cubicle 1 set
- Busbar PT + Earthing Switch Cubicle 1 set
- Outgoing Feeder Cubicle 8 sets
- Bus Section With Power Cable Connection Facilities 1 set
- Interface Cubicle With Power Cable Connection Facilities 1 set
- Including single rate tariff metering kwh-meter for incoming feeder
2 x 20 kV XLPE 630 SQMM AL power cable/phase between bus-section cubicle and
interface cubicle, including cable terminations and accessories for connection
4.3 1 set
between sets of 20 kV switchgear to complete the specified scope of work. (Total
cable lenght is approx. 4 x 3 x 25 m)
Total Price Item 4
5 MISCELLANEOUS
5.1 Miscellaneous equipment and material required for completion the scope of work 1 lot

Total Price Item 5


6 TEST AND COMMISSIONING 1 lot
Total Price Item 6

Grand Total Price Item 1-3


Unit Price EXW Total EXW Price Sales Tax Total Price

40,115,994 40,115,994.12
154,042,513 154,042,512.51

290,084,922 290,084,922.36
158,123,401 158,123,401.47

200,604,558 200,604,557.66
36,676,787 73,353,574.81
113,698,044 113,698,044.35
73,353,576 73,353,576.17

13,869,400 13,869,400

374,429,200 374,429,200

1,491,675,183
318,443,300 318,443,300

556,447,300 556,447,300
244,891,200 244,891,200
353,731,800 2,829,854,400
380,941,900 380,941,900
183,668,400 183,668,400

112,740,300 112,740,300

4,626,986,800

6,118,661,983

You might also like