Professional Documents
Culture Documents
Tle Project
Tle Project
Pretest
Preliminary
1. A _ t_ _ t _ t _ c m _ t
2. _I _e__tt__
3. F_ _s h _ _ _h t
4. _ n t _ _t a _ _ c _ r i _ t s _ _ a p
5. P__ts O_g___zer
6. _in_ __eec_o__
7. M_L__t_s_er
8. H _ x d_ _ _ er
9. N e _ _ _ e _o s _ p_ _ e r
10. F _ _ t s _ _ _ w _ _ I _e r
Presentation
The importance of tools in PC hardware servicing is you can use them for prevent static electricity, for
cleaning, to diagnose the equipment, and driven by hand.
An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to
safely ground a person working on very sensitive electronic equipment, to prevent the
buildup of static electricity on their body, which can result in electrostatic discharge (ESD).
An anti-static floor mat or ground mat is an anti-static device that safeguards an individual
or piece of equipment like a PC from an electrostatic discharge (ESD).
Hand Tools
Flat Screwdriver
Torx Screwdriver
Torx (pronounced /tɔːrks/), developed in 1967 by Camcar Textron, is the trademark for
a type of screw head
characterized by a 6-point star-shaped pattern. A popular generic name for the drive is star,
as in star screwdriver or star bits.
Hex driver
A screw drive is a system used to turn a screw. At a minimum, it is a set of shaped cavities and
protrusions on the screw head that allows torque to be applied to it. Usually, it also involves a
mating tool, such as a screwdriver, that is used to turn it.
Some models have a cutting tool at the tip, especially for cutting wires and electrical work.
Although they're commonly used to cut and bend small wires and electrical wiring,
needle-nose pliers have other uses, as well. They can bend, cut and grip where fingers and
other tools are too big or clumsy.
Wire cutter
Tweezers
tweezers are small tools used for picking up objects too small to be easily handled with
the human fingers. The word is most likely derived from tongs, pincers, or scissors-like
pliers used to grab or hold hot objects since the dawn of recorded history. In a scientific
or medical context they are normally referred to as forceps.
Part Retriever
Flashlight
Cleaning Tools
Compressed air
used to blow away dust and debris from different computer parts without touching the
component.
Parts Organizer
used to hold screw, jumpers, fastener,and other small parts and prevents them from getting
mixed together
Cable tie
Multitester
Loopback adapter
The loopback device is a special, virtual network interface that your computer uses
to communicate with itself. It is used mainly for diagnostics and troubleshooting, and
to connect to servers running on the local machine.
Post activity
Evaluation
d. Driven by hand
a. Philips screwdriver
b. Hex driver
c. Torx screwdriver
a. Wire cutter
d.Cable tie
4. What tool is sometimes called a nut driver is used to tighten nuts in the same way that a screwdriver
tighten screw?
a. Hex driver
b. Torx screwdriver
c. Philips screwdriver
d. Flat screwdriver
5. What tool is used to prevent ESD damage to computer equipment?
b. Tweezers
c. Multitester
6. What tool is used to hold screw, jumpers, fastener,and other small parts and prevents them from getting
mixed together?
a. Loopback adapter
b. Lint free cloth
c. Cable tie
d. Parts organizer
7. What tool is used to test the functionality of computer ports?
a. Multitester
b. Compressed air
c. Loopback adapter
d. Parts organizer
8. What tool is used to hold small parts?
a. Tweezer
b. Needle nose pliers
c. Hex driver
d. Flat head screwdriver
9. Which tool is used to light up dark areas that you cannot see well?
a. Parts organizer
b. Loopback adapter
c. Cable tie
d. Flashlight
10. What tool is used to clean different computer components without scratching or leaving debris?
a. Lint free cloth
b. Wire cutter
c. Cable tie
d. Compressed air
11. What is the tool used to test the integrity of circuits and the quality in computer component?
a. Parts organizer
b. Multitester
c. Loopback adapter
d. Flashlight
12. What tool is used to manipulate small parts?
a. Wire cutter
b. Part retriever
c. Flashlight
d. Tweezers
13. Which tool is used to retrieve parts from location that is too small for your hand to fit?
a. Tweezers c. cable tie
b. Part retriever d. multitester
14. Which tools is used to loosen or tighten cross head screws?
a. Hex driver
b. Torx Screwdriver
c. Philips screwdriver
d. Flat head screwdriver
15. Which tool is used to strip and cut wires?
a. Needle nose pliers
b. Wire cutter
c. Pliers
d. Part retriever
16. What does “ESD” stands for?
a. Electric status discharge
b. Electro static discharge
c. Electronic station discharge
d. Ethereal state discharge
17. Which tool is used to blow away dust and debris from different computer parts without touching the
component?
a. Wire cutter
b. Lint free cloth
c. Compressed air
d. Anti static mat
18. What are the examples of cleaning tools, which tools does NOT belong to the group?
a. Compressed air
b. Needle nose pliers
c. Cleaning cloth
d. Cable tie
19. Which tool is used to bundle cables nearly inside and outside of a computer?
a. Cable tie
b. Compressed air
c. Hex driver
d. Lint free cloth
20. Which tool is used to loosen or tighten screws that have a star like depression on the top a feature that is
mainly found on laptop?
a. Hex driver
b. Torx screwdriver
c. Flat head screwdriver
d. Philips head screwdriver
Key to correction
1. C 1. C
2. B 2. D
3. B 3. B
4. C 4. A
5. B 5. A
6. A 6. D
7. B 7. C
8. B 8. B
9. D 9. D
10. B 10. A
11. B 11. B
12. D 12. A
13. A 13. B
14. D 14. C
15. C 15. B
16. A 16. B
17. A 17. C
18. D 18. B
19. B 19. A
20. C 20. B
Preliminary
Post activity