Professional Documents
Culture Documents
Acrison Weighfeeders Uk
Acrison Weighfeeders Uk
Typical
The Ratiometric Digital Weight Resolver
Acrison scales are available in two basic designs: Flexures
Over 30 years ago, Acrison developed Series 105 "Overhead" and "Platform". Whatever the configuration,
Double concentric As weight is added to or subtracted from the scale, the lever
a truly dynamic scale system for use in all Acrison scales use the same design principle. This is Lever Mechanism
augers to of Weighing System
mechanism moves in a direct and perfectly linear relationship
conjunction with their metering accommodate a wide based on a lever network which uses frictionless flexures of the scale hopper and the metering mechanism is Lever
4.5 mm
Maximum
variety of materials Mechanism Movement Non-Contacting to that weight change. This movement is precisely measured
mechanisms, aimed at satisfying the as the pivot points and a Ratiometric Digital Weight mechanically counterbalanced, so only the product in "Coupling" Element
(Resolver) by the weight resolver and instantly converted into a highly
many differing requirements of the Resolver as the measuring device. In all cases, the mass the system is weighed. Induction Element
(Secured to Main accurate signal in the form of a count ranging from 0 to
processing industries. The unrivalled Equipment Support
Flexure Structure) 1,048,576. Mechanical counterbalancing of the scale means
design has evolved into a range of
that this pure, unamplified scale resolution of 20 bits is only
standard weigh scale models that
The Overhead Scale used for the product.
enables Acrison to offer a complete
feeding solution tailored to the specific Lever Beam
The various Acrison "Overhead" scales are designed with Main Support Structure
of Equipment The scale signal is the result of measuring the ratio of two
application. This ensures that virtually all Ratiometric
Digital Weight
115-230/1/50-60 Input
Supply Hopper
Resolver Dashpot the lever network of the weighing mechanism located signals, not their absolute value, thus providing increased
process requirements can be Power
above the main support structure of the feeding Supply
accuracy and stability.
incorporated into the design of the
mechanism. The scale hopper and feeder are an
weigh feeder system and provides the Resolver Excitation
Series 1015 integral part of the weighing system. The overhead Ratiometric As shown opposite, the non-contacting coupling element is
ultimate in performance and reliability. Dry Solids Computational Resolver Output
Dual augers for Feeding Mechanism
scales are designated the 403 series and are Module
(Auger type shown) Output (Weight) Signal to (Feeder) Controller attached to the primary lever beam and the induction
medium free
flowing materials constructed in sizes to suit the application. element is fixed to the main support structure. This non-
and minimal
product residue
contacting design ensures that the system is unaffected by
shock loads to the scale system.
Leaflet scale - 01 GB