Novotest T-U2: UCI Hardness Tester

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

NOVOTEST T-U2

UCI Hardness Tester


Made in Europe

UCI hardness tester NOVOTEST T-U2 is


designed for rapid non-destructive hard-
ness testing of:
• metals and alloys on standardized international scales
of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV);
• metals with distinctions in properties of steel (e.g.,
non-ferrous metals, alloys of iron and others.) and using
five additional scales for calibration;
• using a scale of tensile strength (Rm) to determine the
tensile strength of carbon steel pearlitic products by au-
tomatic recalculation from Brinell (HB) hardness scale
SPESIFIKASI • Ultrasonic hardness tester T-U2 implements the ultra-
sonic contact impedance method (UCI).
Range of hardness 20 – 70
• The device has the main advantages of ultrasonic hard-
– Rockwell, HRC 90 – 450
ness tester. It allows user to measure the hardness from
– Brinell, HB 230 – 940
small and thin products to large parts. The device is very
– Vickers, HV 370 – 1740
– Tensile strength, MPa usability and reliable.
Measurement accuracy HV+ / – 3%;
HRC+ / – 1,5%; ATVANTAGES:
HB+ / – 3%;
Dimensions, mm 122*65*23 • Possibility of measuring the hardness value of products
with any weights and thickness from 1 mm (small items,
Operating temperature range, ° C -20 to +40
thin-walled structures, pipes, tanks, steel sheets, the
Power 2 AA batteries products of complex shape, hardness control of metal
Bateries life, hours, not less 20 coatings, etc.)
• Small mark on the surface of the tested product (user
Weight of electronic unit with batteries, 0.2 can test mirror surfaces, necks shafts, knives, gear teeth,
no more, kg etc.)
• Hardness testing the hardening layer of the surface
Restrictions about the using of the UCI hard- • Wide range of hardness measuring
ness tester T-U2 • Usability of measuring
• Minimum number of controls
• Big graphic display with brightness backlighting
Limited using of hardness tester for hardness testing of • Control the charge level of batteries
products with coarse-grained structure (eg, cast iron) or • Extended temperature range (frost protected, operating
product which are weighing less than 10 grams, or thin- temperature up to -20 °C)
ner than 1 mm. • Device has internal memory and allows user to connect
with PC
• New, intuitive menu with tips on the buttons

NOVOTEST T-U2
UCI Hardness Tester

You might also like