Professional Documents
Culture Documents
Industrial Products
Industrial Products
AS 9100 is the only globally recognized standard for the aerospace industry
and it has become the worldwide standard for the sector.
APPLICATION
Tungsten Carbide Powder,
Heavy Alloy, Electrical Contacts,
Diamond Tools, Wires etc.
APPLICATION
Cemented Tungsten Carbide Cutting Tools,
Wear Parts, Roll & Die, Diamond Tools,
Mining Tools etc.
RTP Powder
TaeguTec supplies tailor-made RTP(Ready-to-press)
powder as per customer’s specification.
Free from slippage even under high rolling torque & low rolling speed.
Flexible and optimal design for every requirement.
Suitable for various applications from Finishing Block
to Intermediate Mill.
Higher productivity with excellent surface finish of
final products through precise dimension control
during rolling.
Minimizes downtime for roll changes.
Kg·m
• Rolling Torque m/s
• Rolling Speed
9000
8000 3.5
7000 3
6000 2.5
5000
2
4000
1.5
3000
1
2000
1000 0.5
0
7 8 9 10 Stand 7 8 9 10 Stand
Application
- Wire Rod Mill: Pre-Finishing Mill (PFM), No Twist Mill (NTM)
Reducing Sizing Mill (RSM), Pinch Roll
- Rebar Mill: Finishing Block, Pinch Roll
Oval 30-80
330-450 100-130 1,000-6,000 1.5-12 T30M, T30S
Round 20-50
• NTM to RSM
Roll Size Products Rolling
Outer Diameter Width Final Size Speed Grade
(Ømm) (mm) Type (Ømm) (m/sec)
Oval
208-212 60-72 10-20 T20M, T20S, T17L
Round
5.5-12
Oval
158.75-166 57.3-70 20-120 T15S, T14L, T11L
Round
Available in various grades for high performance with high surface finish enabling defect-free
finished production.
Stable & reliable clamping technology.
Application
- Wire Rod Mill: PFM for Wire Rod
Roll Size Products Rolling
Outer Diameter Width Final Size Speed Grade
(Ømm) (mm) Type (Ømm) (m/sec)
Oval,
200-220 25 5.5 5-20 T20M
Round
- Round Bar Mill: Reducing Sizing Block (RSB) for Round Bar
Oval,
300-380 40-90 16-42 10-20 T25H, T20M,T17L,T15M
Round
Application
- Rebar Mill: Slit stand for rebar (D8mm-D20mm)
Several grades available with excellent toughness for high rolling torque & low rolling speeds.
Stable & reliable clamping technology.
Application
- Wire Rod Mill & Rebar Mill: Intermediate Mill.
Oval 40-70
290-475 140-235 1,000-4,000 3-10 T30M,T27M,T23L
Round 20-40
Application
- Wire Rod Mill, Rebar Mill & Round Bar Mill: Finishing Mill for small size products.
Application: Stretch Reducing Mill (SRM) for seamless pipes & Straightener Roll
Roll Size
Product
Outer Diameter Width Grade Remark
Size
(Ømm) (mm)
T20M, T30S 3-Roll type
Ø50-Ø120mm 270-380 85-150
T20H, T30H Hot Rolling
Application: Finishing Mill for Light Section Bar Mill (Angle Bar, Flat Bar).
Roll Size
Product
Item Outer Diameter Barrel Length Grade
Size
(Ømm) (mm)
Multi-Binder Grade
T16H 84 16 82.9-84.9 230 13.7-14.1 Finishing Block & Pinch Roll for Wire Rod
T17L 83 17 83.6-85.6 230 13.6-14.0 Finishing Block & Pinch Roll for Wire Rod
T19L 81 19 82.9-84.9 230 13.4-13.8 Finishing Block & IFM for Wire Rod
T20M 80 20 81.9-83.9 230 13.3-13.7 Finishing Block & IFM for Wire Rod
T20H 80 20 81.7-83.7 210 13.3-13.7 Finishing Block & IFM for Wire Rod
T23L 77 23 81.4-83.4 230 13.1-13.5 IFM for Wire Rod & Prefinishing for Deformed Bar
Single-Binder Grade
T15S 85 15 84.5-86.5 230 13.6-14.0 Finishing Block for Wire Rod & Round Bar
T20S 80 20 82.9-84.9 230 13.2-13.6 Finishing Block & IFM for Wire Rod
T25S 75 25 82.7-84.7 230 12.8-13.2 IFM for Wire Rod & Prefinishing for Deformed Bar
for Tube Mill
T30S 70 30 79.6-81.6 210 12.4-12.8
Finishing for Deformed Bar
Two hole straight coolant rods Two hole and three hole
30 degree coolant rods
Unground Long & Short Rods Ground Long & Short Rods
preform
Excellent deformation resistance due to
high compressive & impact strength.
plate
High cutting-edge strength & good wear resistance
by using fine & ultrafine WC.
High deformation & deflection resistance.
APPLICATION
• Stamping die & punch for lead frame,
connector, switch and relay.
APPLICATION
• Stamping molds for 2-piece can and 3-piece cans
• Stamping molds for aerosol cans
KNIFE
Longer tool life with high impact strength,
high tensile strength & wear resistance.
APPLICATION
• Pin-chucks, guide rolls
• Pins and jigs for heat treatment • Nozzles
• Gate blocks for aluminum casting
• Dies for hot extrusion and drawing
APPLICATION
• Magnetic heads for hard discs
• Paper sliders
• Parts requiring higher strength and hardness than
alumina at room temperature