Professional Documents
Culture Documents
Phu Luc - Huong Dan Cau Hinh VPN L2 B0404
Phu Luc - Huong Dan Cau Hinh VPN L2 B0404
Phu Luc - Huong Dan Cau Hinh VPN L2 B0404
1
1. Create Qos Marker with parametters:......................................................................1
2. Create QoS session Profile:....................................................................................2
3. Create Ethernet port:................................................................................................3
4. Creat VPN service:...................................................................................................5
5. Enable user to user communication on Pon Vlan 2451............................................6
6. Add static mac for Vlan Shub and Vlan LT...............................................................7
1
o Default Ethernet Priority: Best Effort (0)
Untagged Frames:
o mode: Transmit
o Ethernet priority: Use DSCP-to-PBit Mapping Profile
Priority tagged frames:
o Mode: Transmit
o Vlan Tagging: Use Default C-VlanID (From ONT Port)
Down stream Parametter:
Genneral:
o Mode: Strip Tag
Parameters:
Marker Profile: IACM3 (FD_Marker_BE) <- create above
2
3. Create Ethernet port:
Like in ONT I-240W-P.
Parameters: ( blue *)
3
4
4. Creat VPN service:
Tick V to apply.
(2) From UNI ->HSI Service -> Create -> HSI Service
ID: 1
5
5. Enable user to user communication on Pon Vlan 2451
6
Note: Add Static MAC on both PC clients or on OLT.
7
Add the MAC of ONT => Next
8
Browse to Ne->InfrastStructure->Layer 2-> Vlan 2451 -> Create->Static MAC
Adress
9
Add the bridge port that has configured vlan 2451
10
Add the bridge port that associated with VLan 2451
11
Add the Wan IP for Brand 1 => Next
12
Add the C-Vlan ID => Finish
13
14