Professional Documents
Culture Documents
2008 Specification Sheet 2.0 Utilities
2008 Specification Sheet 2.0 Utilities
These General Specifications describe the fit-out standards required for new Plumbase
branches and for branch refits.
Refer to the current Plumbase Components & Finishes Schedule for the product and
finishes references for each item.
Read in conjunction with the submitted drawings. Any discrepancies to be notified to
Plumbase.
2.0 UTILITIES
2.1 GAS (Normally gas would not be used on Plumbase new installations)
2.2 ELECTRICITY
Generally, a 3-phase metered supply will already be installed. Preferred power supply
100AMP / min 60KVA
Install a new consumer board to provide sufficient protected circuits for the branch with
(as a minimum) dedicated circuits for;
1. General power
2. Lighting & signage
3. Loading bay & security shutters
4. Heating
5. Alarms
6. Data comms & phones
All electrical installations are to be installed to IEE Regulations and Certified.
Plumbase will arrange connection and installation of meter.
2.3
WATER
2008 Specification