Professional Documents
Culture Documents
RT 84 PDF
RT 84 PDF
28.08.2009
Load Program
Contents
1 Introduction 1
2 Current load program 1
3 Improved load program 2
150
100
50
0
0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00
Duration in hours
Figure 1
150
100
50
0
0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00
Duration in hours
Figure 2
3.1 Settings
The new settings of parameter T4 will change the load-up phase from full
maneuvering speed to full away speed. It is indicated with the vertical
dashed lines in diagram (Figure 3).
The load-up phase from engine start to full maneuvering will remain the
same.
Consequently the load-up to full away speed will take up to 33 minutes
longer than with the previous settings.
Table 1
Note: The code for the parameter T4 (Wärtsilä designation) depends on the
Remote Control System maker. Please contact the maker of your system for
adjustment to the new load program settings.
90
80
70
60
50
Current specification
New specification
40
0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00
Duration in hours
Figure 3
Note: Load down time shall remain the same as originally specified.