Professional Documents
Culture Documents
Additional Required by Spec (DNV-OS-F101 Appendix D, Subsection H)
Additional Required by Spec (DNV-OS-F101 Appendix D, Subsection H)
Additional Required by Spec (DNV-OS-F101 Appendix D, Subsection H)
H)
Required by Fab. Code (ISO 15590-1 2009)
Item
Method MT:
ISO 13665 or ASTM E709 Method MT:
In accordance with
Bend body (MT or PT) T and P MT Acceptance: DNV-OS-F101 B500 and ISO 18093-5
10.5.4
All cracks, laps, laminations and all rounded indications greater than 3 mm in
any direction shall be classed as defects.
UT Method:
ISO 9305
Bend body (UT) transverse In accordance with
T and P UT Acceptance: -
defects 10.5.5
Free from transverse defects.
UT Method Method UT
In accordance with ISO 12094, ISO 10124, ASTM A435, ASTM A578 ISO 10893-8, App.A
Bend body (UT) laminations M
10.5.5 UT Acceptance UT Acceptance:
ISO 3183 DNV-OS-F101 Table D-12
Method UT:
ISO 10893-12
Pipe Body (UT) Thickness - - - UT acceptance:
The specified maximum and minimum wall thickness
shall be met