Professional Documents
Culture Documents
DMM
DMM
COMMODITY DESCRIPTION
A. Application
This is designed to perform sreening exams as well as (Spot compression, Magnified and/or coned views).
It is a complete, modular system that eliminates the need for film cassette and takes full advantage of
digital technology from on screen image display
(Diagnosis from printed copy) to networking, filming and archiving.
B. Feature
1. Digital technology offers the capability to aquire images in near real-time and processe them.
2. Digital technology offers high exam productivity and potential dose reduction as compared with Screen/Film
3. Digital technology offers exellent contrast sensitivity and low noise level
4. Acquisition workstation that will display the acquired images in the room for a quick check of breast positioning and
Mortion, or to adjust brightness and contrast levels.
5. Achiving, Networking and Filming for diagnosis is possible from the acquisition workstation and any number of equally
high quality film copies can be produced as needed.
C. Configurations
1. Gantry 1 set
2. X-ray Generator & X-ray Tube 1 set
3. Full field flat panel Digital Detector 1 set
4. Acquisition Station 1 set
5. Dicom connection 1 set
6. Digital Mammography Quality control tool 1 set
7. Breast Tomosynthesis 1 set
8. Mammo advanced diagnostic workstation 1 set
8-1. Mammo advanced diagnostic workstation 1 set
9. Cad - 3D Enhanced V-preview 2 set
10. Self Compresstion Solution 1 set
11. 2D Localization kit 1 set
12. Stereotactic Biopsy 1 set
13. D.B.I™ (Decubitus Beast Imaging) Table 1 set
14. Image cheker Cad processor 1 set
15. Sensory suite 1 set
16. Accessories 1 set
D. SYSTEM SPECIFICATION
1. Gantry 1 set
1) Controls on both sides, top and bottom of control arm
2) Emergency stop button which controls gantry and compressor motion.
3) Detector Focal Distance : 660mm
4) Vertical range of motorized column : 650mm to 1500mm
5) Angulation in vertical plane about vertical support arm : -180˚/+180˚
6) Automatic collimating system
7) Carbon fiber, Removable Grid 11:1 ratio 6.7 lp/mm
8) Compression Type
E. Remarks
1. Installation
Installation of this equipment at customer's premise should be done on the contract's responsibility.
2. Warranty Conditions
Contractor or Supplier should be responsible free of charge after service(A/S) whenever
there is any defect or trouble during five years after the equipment is officially accepted by end-user.
3. Supplier should provide software upgrade service for free through GE FMI.
4. In no case shall the amount of damages to be paid by Seller to the Purchaser exceed the contract price.