This document requests a small 3-digit LCD display that is approximately 20mm wide and includes symbols above the digits to reduce the overall width. It also requests a through-hole or SMT 6V 300mA 3-position switch with slider options on the top or side. Non-reflective with static display and pin-based are preferred for the LCD display.
This document requests a small 3-digit LCD display that is approximately 20mm wide and includes symbols above the digits to reduce the overall width. It also requests a through-hole or SMT 6V 300mA 3-position switch with slider options on the top or side. Non-reflective with static display and pin-based are preferred for the LCD display.
This document requests a small 3-digit LCD display that is approximately 20mm wide and includes symbols above the digits to reduce the overall width. It also requests a through-hole or SMT 6V 300mA 3-position switch with slider options on the top or side. Non-reflective with static display and pin-based are preferred for the LCD display.
This document requests a small 3-digit LCD display that is approximately 20mm wide and includes symbols above the digits to reduce the overall width. It also requests a through-hole or SMT 6V 300mA 3-position switch with slider options on the top or side. Non-reflective with static display and pin-based are preferred for the LCD display.
angle as shown on Some details: 20mm/25mm the digits is not Reflective required! Pin based Static SWITCH SLIDE DP3T 300MA 6V (Options below) Through-Hole (Slider on Top) Through-Hole (Slider on the side)