Professional Documents
Culture Documents
Lab07 Brians
Lab07 Brians
LAB 7
CONFIGURING
STORAGE
Table 7-1
Computers required for Lab 7
Computer Operating System Computer Name
Server (VM 1) Windows Server 2012 R2 LON-DC1
Client (VM 2) Windows 10 LON-CL1
In addition to the computers, you will also require the software listed in Table 7-2 to
complete Lab 7.
Table 7-2
Software required for Lab 7
Software Location
70-698 Installing and Configuring Windows 10
SCENARIO
Mindset A simple volume is a type of volume that uses free space available
on a single disk. Because it requires only a single disk, a simple
volume is the quickest and easiest to set up.
Completion time 20 minutes
2. On LON-CL1, right-click the Start button and choose Disk Management. Disk
Management opens, as shown in Figure 7-1.
70-698 Installing and Configuring Windows 10
Figure 7-1
Managing Disks with Disk Management
8. In the New Simple Volume Wizard, on the Welcome screen, click Next.
9. On the Specify Volume Size page, for the Simple volume size in MB, type 5000
and then click Next.
10. On the Assign Drive Letter or Path screen, answer the following question. Then
make sure that the assign the driver letter is F and click Next.
11. On the Format Partition screen, answer the following question. Then in the
Volume label text box, type Data. Click Next.
12. On the Completing the New Simple Volume Wizard screen, click Finish.
13. If a message displays, stating that you need to format the disk, click the Cancel
button. The message box is hidden behind Disk Management.
14. Take a screen shot of Disk Management showing the new volume by pressing
Alt+PrtScr and then paste it into your Lab07_worksheet file in the page
provided by pressing Ctrl+V.
70-698 Installing and Configuring Windows 10
15. To expand the new drive, right-click the partition that you just created (F drive)
and choose Extend Volume.
16. In the Extend Volume Wizard, on the Welcome page, click Next.
17. On the Select Disks page, answer the following question and then click Next.
18. On the Completing the Extend Volume Wizard page, click Finish.
19. Take a screen shot of Disk Management showing the new volume by pressing
Alt+PrtScr and then paste it into your Lab07_worksheet file in the page
provided by pressing Ctrl+V.
70-698 Installing and Configuring Windows 10
2. In the Control Panel pane, click System and Security > Storage Spaces.
3. On the Manage Storage Spaces page (see Figure 7-2), click Create a new pool
and storage space.
70-698 Installing and Configuring Windows 10
Figure 7-2
The Manage Storage Spaces page
4. On the Select drives to create a storage pool page, click Create pool.
How many disk failures can a two-way mirror have before you
Question lose the data?
8
Single drive failure
70-698 Installing and Configuring Windows 10
6. Take a screen shot showing the Manage Storage Spaces page by pressing
Alt+PrtScr and then paste it into your Lab07_worksheet file in the page
provided by pressing Ctrl+V.
End of exercise. Close any open windows before you begin the next exercise.
Lab
Challenge Using Windows PowerShell to Configure Disks
Overview In this exercise, you will view your disks and partitions using
Windows PowerShell. You will then format a drive and delete a
disk using Windows PowerShell.
Mindset Just as you can manage disks, volumes, and file systems with Disk
Management, you can also use Windows PowerShell. Windows
PowerShell allows for task automation and configuration management
that consists of a command-line shell and associated scripting language.
Completion time 10 minutes
1. On LON-CL1, right-click the Start button and type PowerShell. From the
search results, click Windows PowerShell.
70-698 Installing and Configuring Windows 10
Get-Disk
Get-Partition
70-698 Installing and Configuring Windows 10
4. To format the F drive, from the Windows PowerShell window, execute the
following command:
Format-volume –driveletter f
Clear-disk 4 -RemoveData
7. When you are prompted to confirm that you want to erase all data on disk 4,
type y.
End of lab.