Q Q Z 2m) - F Q (Z) Q Z 2) Q Q: Specific Humidity at Saturation Relative Humidity of The Air

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

spezifische Feuchte = Specific humidity

q 2m =q¿ ( z =2m ) . f rel

q2 m−q H
q^ ( z)=q2 m +(z −2)
2−H

For the specific humidity q there are two initial information: The relative Humidity at 2m height
and the specific humidity at the modeling edge q H.

q ¿ specific humidity at saturation

f rel relative humidity of the air

Outdoor thermal comfort is essential to evaluate the quality of urban microclimates. There are
several variables that influence outdoor comfort levels. The purpose of this research is to provide
an elaborative view of certain variables (vegetation, ground cover, building materials. The
investigation will be done in Dubai's hot arid climate. Field measurements and computer
simulations were developed and conducted on December 21 and September 21 in order to
achieve the aim and objectives of the study in both winter and summer seasons respectively.
Envi-met model was calibrated and proved to be reliable to present selected base case accurately
through the correlation of measured and computed experiments. Basic meteorological variables
were measured and simulated based on variation in ground cover, vegetation, and building
materials to measure the cooling effect performance of each variable. The outcome was used in
evaluating the impact of modification and used later to assess its benefits on outdoor thermal
comfort. The outdoor thermal comfort was assessed based on Physiological Equivalent
Temperature (PET) to evaluate the modification benefits toward outdoor comfort level.
It is revealed that vegetation had a better cooling impact than ground cover and building
materials due to its ability to limit direct solar exposure and evapotranspiration process within
the hottest period of the day 14:00 in Dubai. The study as well revealed the impact of trees
density and specifications in altering thermal stress outdoors. Besides, the optimum cooling was
recorded upon combining higher tree canopy density with green ground cover as comfort level
improved by 5.35 °C versus a 0.65 °C reduction on concrete and vegetation at 15:00 on
September 21. Therefore, the study outcomes from the optimum cooling potential of appropriate
physical properties of vegetation and ground cover can serve as a guideline in mitigating thermal
stress and improve microclimate in outdoor spaces.

You might also like