5.16 STARTUP DEVICES
This is provided on each boiler and is operated when the boiler is being lighted up and
to gain or achieve the required values of pressure and temperature and to stabilize the
chemical values of boiler water before changing the system lines or HP/LP bypass even
Safety valve of the boiler is supposed to close after certain pressure drop. If it is not
closing at a particular pressure, by opening startup vent valve, the pressure can be dropped to
the lower value and safety valve closing is achieved. If the safety valve is allowed to
continuously blow the seat of the safety valve gets damaged and may create a problem in
running the boiler. Startup vent is operated from the control room. It is apuffing type valve.