Professional Documents
Culture Documents
JDM F17X3: Relationships Between Various John Deere Paint Performance Standards and Qualifications
JDM F17X3: Relationships Between Various John Deere Paint Performance Standards and Qualifications
JDM F17X3: Relationships Between Various John Deere Paint Performance Standards and Qualifications
Table of Contents
1 Scope ..............................................................................................................................................................
2
2 Terms and Definitions .....................................................................................................................................
2
3 Grandfathered Qualifications ..........................................................................................................................
2
4 Correlation of JDM F17 and JDM F20 Performance Requirements to Other John Deere Paint
Performance Standards ..................................................................................................................................
4
5 References ......................................................................................................................................................
7
Summary of Changes from Previous Edition
(For Information Only — Not Part of the Standard) ........................................................................................
8
List of Tables
Table 1 Grandfathered Qualifications for JDM F11 Performance Classes ..................................................................
3
Table 2 Grandfathered Qualifications for JDM F12 Performance Classes ..................................................................
3
Table 3 Grandfathered Qualifications for Other John Deere Unit Standards ...............................................................
4
Table 4 JDM F11 Correlation to JDM F17 and JDM F20 .............................................................................................
5
Table 5 JDM F12 Correlation to JDM F17 and JDM F20 .............................................................................................
5
Table 6 Correlations of Selected John Deere Unit Standards to JDM F17 and JDM F20 ...........................................
6
Table 7 Correlations of Selected JB/T 5673 Paint Designations to JDM F14, JDM F17, and
JDM F20 ..........................................................................................................................................................
6
1 Scope
1.1 JDM F17X3 describes the relationships between JDM F17 and JDM F20 and several John Deere
paint performance standards that are replaced by JDM F17 and JDM F20. In particular, JDM F17X3
covers:
Requirements for existing paint performance qualifications to be accepted as meeting the
qualifications of specified JDM F17 performance levels according to JDM F17X2 and of
specified JDM F20 performance classifications according to JDM F20X2.
JDM F17 and JDM F20 qualifications that shall be considered as meeting the qualifications of
other specified John Deere paint performance standards.
1.2 JDM F17X3 describes the relationships between JDM F14, JDM F17, and JDM F20 and selected
JB/T 5673 paint designations previously used in China.
1.3 This standard can contain mandatory provisions, which are identified by the words “shall” or
“required”. Compliance with the mandatory provisions is required to claim conformance with this standard.
This standard can also contain guideline provisions, which are generally identified by the words “should”
or “recommended”. Compliance with the guideline provisions is not required, because they might not be
appropriate for all machines or all applications.
For the purposes of JDM F17X3, the following terms and definitions apply.
2.1
grandfathered qualification
An existing qualification to a John Deere paint performance standard other than JDM F17 or JDM F20
that is accepted as a JDM F17 qualification according to JDM F17X2 or a JDM F20 qualification
according to JDM F20X2.
2.2
paint process
The controlled variables that contribute to the performance of the final paint; this includes but is not
limited to substrates, paint materials, pretreatment materials and parameters, application parameters, and
cure parameters.
3 Grandfathered Qualifications
3.1 An existing process qualification for another John Deere paint performance standard can result in
grandfathered qualification to specified JDM F17 levels or JDM F20 classifications.
3.2 In order for a qualification to another John Deere paint performance standard to be considered a
grandfathered qualification, it shall meet all of the following conditions
Existing qualification shall have been generated by either a John Deere enterprise or John
Deere unit materials engineering group.
The grandfathered qualification shall be valid only for the paint process described in the
qualification report.
The process owner or issuing facility shall maintain a copy of the original qualification report.
3.3 Grandfathered qualifications expire when the process documented in the original qualification has
changed. Once the paint process has been changed, the new (changed) process shall be qualified
according to JDM F17X2 or JDM F20X2.
2
APPROVED FOR SUPPLIER
DISTRIBUTION JDM F17X3
3.4 Table 1, Table 2, and Table 3 show the grandfathered qualifications for several John Deere paint
performance standards. Exceptions included in a particular paint designation are not covered by the
indicated grandfathered qualifications unless the exceptions have been reviewed by the John Deere
materials engineering group that approved the original qualification to ensure that the exception
requirements are met by the process.
3.5 Paint processes approved as meeting the original qualifications shown in Table 1, Table 2, and
Table 3 shall be considered as qualified for the corresponding JDM F17 performance levels and JDM F20
performances classes, subject to the exceptions indicated in clause 3.4.
3.6 Table 1 specifies the grandfathered qualifications applicable to JDM F11 performance classes.
3.7 Table 2 specifies the grandfathered qualifications applicable to JDM F12 performance classes.
3
JDM F17X3 APPROVED FOR SUPPLIER
DISTRIBUTION
3.8 Table 3 specifies the grandfathered qualifications applicable to other John Deere paint
performance standards.
4.1 Table 4, Table 5, and Table 6 show the JDM F17 performance levels and JDM F20 performance
classes that are accepted as meeting the requirements specified according to other John Deere paint
performance standards. Exceptions included in a particular paint designation are not covered unless the
exceptions have been reviewed by the John Deere materials engineering group that established the
original specification to ensure that the exception requirements are met by the process.
4.2 Paint processes approved as meeting the JDM F17 performance levels or JDM F20 performance
classes shown in Table 4, Table 5, and Table 6 shall be considered as meeting the requirements for the
corresponding paint performance standard, subject to the exceptions in clause 4.1.
4
APPROVED FOR SUPPLIER
DISTRIBUTION JDM F17X3
4.3 Table 4 specifies the JDM F17 performance levels and JDM F20 performance classes that are
accepted as meeting JDM F11 performance requirements.
4.4 Table 5 specifies the JDM F17 performance levels and JDM F20 performance classes that are
accepted as meeting JDM F12 performance requirements.
5
JDM F17X3 APPROVED FOR SUPPLIER
DISTRIBUTION
4.5 Table 6 specifies the JDM F17 performance levels and JDM F20 performance classes that are
accepted as meeting the performance requirements of various John Deere unit paint performance
standards.
Table 6 Correlations of Selected John Deere Unit Standards to JDM F17 and JDM F20
Existing Paint Designation on
Part Drawing Equivalent JDM F20 Class Equivalent JDM F17 Level
JDH612 Class A None JDM F17 Level 2
JDH612 Class B None JDM F17 Level 2
JDH612 Class C JDM F20 Class 3 None
HOR10007 None JDM F17 Level 1
HOR10007 with SCAB Requirement None JDM F17 Level 3
HOR10037 CC01 None JDM F17 Level 1
LaN 683 None JDM F17 Level 2
JDM F17 Level 1 is considered equivalent to JDH612 Class A and Class B for some applications. See
JDHZ612.
HOR10007 parts with Class A appearance requirements per HOR10019 require SCAB testing
4.6 Table 6 specifies the JDM F17 performance levels, JDM F20 performance classes, and JDM F14
performance classes that are accepted as meeting the performance requirements of selected JB/T 5673
paint designations.
Table 7 Correlations of Selected JB/T 5673 Paint Designations to JDM F14, JDM F17,
and JDM F20
Existing Paint Designation Equivalent JDM F20 Equivalent JDM F17 Equivalent JDM F14
on Part Drawing Class Level Class
TQ-1-1-DM None JDM F17 Level 1 None
TQ-1-2-DM None JDM F17 Level 1 None
TQ-2-1-DM None JDM F17 Level 1 None
TQ-2-2-DM JDM F20 Class 3 None None
JDM F17 Level 1
TQ-2-3-M None minus requirement for None
powder paint
TQ-5-JY-D None JDM F17 Level 1 None
TQ-5-R-M None None JDM F14 Class 3
6
APPROVED FOR SUPPLIER
DISTRIBUTION JDM F17X3
5 References
For undated references, the latest edition of the referenced document (including any amendments)
applies.
5.1.1 John Deere Standards can be accessed by John Deere personnel via the Engineering Standards
internal website.
5.1.2 Employees of suppliers with an approved John Deere supplier number can obtain access to John
Deere Standards via the JD Supply Network (JDSN). Access to JDSN is by approved individual name
and password. Suppliers should contact their Supply Management representative with questions about
JDSN.
Note 1 Only John Deere Standards which have been approved for supplier distribution are available via JDSN.
5.2.1 Most standards from organizations external to John Deere are available to John Deere personnel
via the Engineering Standards internal website.
5.2.2 Suppliers are responsible for obtaining relevant external standards. In accordance with copyright
laws and Company policy, John Deere personnel shall not provide copies of these standards to suppliers.
JB/T 5673 Paint for Tractors and Machinery for Agriculture and Forestry — General
Technical Specifications
7
JDM F17X3 APPROVED FOR SUPPLIER
DISTRIBUTION
A
Summary of Changes from Previous Edition
(For Information Only — Not Part of the Standard)