This document discusses an aeo feature with a 200ohm 2500 setting and an aeo mode. It specifies that the blue wire should connect to the larger port and the red wire to the smaller port on a vent manifold. The blue wire is intended to run at 2-3 psi while the red wire should operate between 130-150 psi.
This document discusses an aeo feature with a 200ohm 2500 setting and an aeo mode. It specifies that the blue wire should connect to the larger port and the red wire to the smaller port on a vent manifold. The blue wire is intended to run at 2-3 psi while the red wire should operate between 130-150 psi.
This document discusses an aeo feature with a 200ohm 2500 setting and an aeo mode. It specifies that the blue wire should connect to the larger port and the red wire to the smaller port on a vent manifold. The blue wire is intended to run at 2-3 psi while the red wire should operate between 130-150 psi.