Professional Documents
Culture Documents
Weekly Report - Alfin Hidayat - Week 1 - Orientation, Safety, and Petroleum Overview - Alfin Hidayat PDF
Weekly Report - Alfin Hidayat - Week 1 - Orientation, Safety, and Petroleum Overview - Alfin Hidayat PDF
Weekly Report - Alfin Hidayat - Week 1 - Orientation, Safety, and Petroleum Overview - Alfin Hidayat PDF
Retooling
Vocational
Program 2017
Electrical Engineering Weekly Report: Week 1
Technology
Alfin Hidayat
Banyuwangi State Polytechnic
Republic Of Indonesia
Table of Contents
Page
Table of Contents......................................................................i
1.6 Attachment..................................................................... 4
i|Page
Week 1 - Orientation/Safety/Petroleum Overview
Instructor :
1. Orientation
a. Introduction Personnel Committee of Training
b. Field Trip Campus SAIT
2. Safety
a. Identify Workplace Hazard and Establishing Hazard Controls
b. Effect Engineering controls to remove or nullify the remaining
hazards
c. Educate the worker an avoiding hazards
d. Administrative Controls
e. Personal Protective Equipment
3. Petroleum Overview
a. From Pore Space to Gas Tank
b. Upstream Sector Conventional Production
4. Assessment
a. Safety and Petroleum Overview Assessment
1.2 Rationale
Why it is important to learn this material?
1|Page
1.3 Learning Outcome
When complete this material, you will able to…
3. Controlling Hazards
Once any electrical hazards have been recognized and evaluated,
they must be controlled. This can be accomplished by either
changing the hazardous part of the work environment (preferred
method) according to OSHA regulations on electrical safety and the
NFPA 70E and/or implementing safe work practices to lessen or
eliminate the hazard.
2|Page
1.5 Documentations
3|Page
1.6 Attachment
L.1 Certificates
4|Page
L2. Schedule of Week 1
Tabel 1 Schedule of Week 1
11:30
12:30
Petroleum
Orientation Safety Safety Petroleum
Overview
13:00 Orientation Orientation Overview
(NN904 12-3
(TD153) (TD153) (TD153)
KA329 3-3:30)
Francis Francis Francis
Francis
14:00 Rambaransingh Rambaransingh Rambaransingh
Rambaransingh
15:30
16:00
17:00
5|Page
L.3 Material Worksheet Hazards Identification
Wellsite Safety
Hazards Lab
6|Page
Wellsite Safety Hazards Lab
Learning Outcome
Here is what you will be able to do when you complete each objective.
Identify, Assess and Control safety hazards in the Wellsite facility
Introduction
Throughout the Wellsite facility you will find many safety hazards. Your first task in
this exercise is to conduct an inspection of the Wellsite facility to determine how
many obvious safety hazards you can locate.
EXERCISE
All jobs need to be assessed for hazards. Since you will be operating this facility it
will be necessary for you to conduct an audit of the Wellsite to become aware of
potential safety hazards associated with the operation of the equipment in the
Wellsite. You will also have to rate the hazards using the method shown.
If you find a hazard, elimination of the hazard is your first choice of action. However
if this is not possible, then control of the hazards by using the hierarchy of controls is
necessary. Hazard control methods are summarized below.
7|Page
HAZARD CONTROL
1. Engineering
2. Administrative
3. Personal Protective Equipment.
Engineering controls:
Administrative controls:
Hard hat
Safety boots
Eye protection
Hearing protection
Fire resistant clothing
8|Page
Respiratory protective equipment
Fall protection
Possible hazards you may want to consider when evaluating your operations in the
Wellsite:
Physical hazards
Gases
Vapours
Mists
Fumes
Dusts
Working conditions
Stress
Fatigue
9|Page
Workplace violence
Once the hazards associated with the jobs/tasks are determined you will have to rate
the hazards as follows:
1. Rank the frequency as per the Hazard Rating chart (see page 4) as follows:
1 - rarely, a person is exposed to the hazard less than once a month
2. Rank the probability of occurrence as per the Hazard Rating chart as follows:
1 - unlikely to occur
2 - some chance/probable
2 - injury results in lost time, seeking medical help or moderate property damage
10 | P a g e
Table 1
Hazard Rating Chart
ASSIGNED VALUES
1 2 3
Determine the ranking for each hazard using Frequency + Probability + Severity =
Risk Rating
High (7-9): means the hazard must be attended to immediately. Controls must be in
place and a safe job procedure should be developed and communicated to those that
are affected.
Moderate (4-6): means the hazard requires attention. Controls should be put into
place and safe work procedure should be developed prior and communicated to those
that are affected. Employees must be aware of the hazard.
11 | P a g e
Low (1-3): means the hazard requires attention. Controls must be in place and a safe
job procedure should be developed and communicated to those that are affected. A
safe work procedure may also be developed.
Assignment
Complete the following tables for 2 hazards in the following areas of the Wellsite:
COMPRESSOR HAZARDS
Compressor
Hazard 1
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
12 | P a g e
Compressor
Hazard 2
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
13 | P a g e
DEHYDRATOR HAZARDS
Dehydrator
Hazard 1
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
14 | P a g e
Dehydrator
Hazard 2
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency
of Exposure
15 | P a g e
SEPARATOR/ TREATER
Separator/ Treater
Hazard 1
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
16 | P a g e
Separator/ Treater
Hazard 2
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
17 | P a g e
GENERAL HAZARD WELLSITE AREA
Wellsite Area
Hazard 1
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency
of Exposure
18 | P a g e
Wellsite Area
Hazard 2
______________________________________________________________
Suggested remedy:
______________________________________________________
ASSIGNED VALUES
1 2 3
Severity
Probability
Frequency of
Exposure
19 | P a g e
HAZARD RISK RATING SUMMARY
COMPRESSOR
2
DEHYDRATOR
2
SEPARATOR/TREATER
2
WELLSITE AREA
2
20 | P a g e