y Tatvodwunion ty chemical Engineering
Pod for ty diey ad Hrmnewow 3.3. The Use of Teams in Solving Problems 35
Kenneth Sie
Wiley Coit)
John Hack
Avoiding Harassment
All professionals, including chemical engineers, are morally obligated to treat their as-
sociates with respect, independent of race, gender, and lifestyle. That respect should be
‘manifest in all interpersonal interactions. In addition, all decisions pertaining to advance-
‘ment, salary, and other recognition should be fair and based on professional performance,
again without regard to race, gender, and lifestyle. In addition, chemical engineers should
be prepared to defend the rights and fair treatment of their colleagues.
Ethical Practice
Observing the AIChE Code of Ethics summarized above requires that individual profes-
sionals and companies are truthfal and responsible in all aspects of their professional ser-
vice. While most engineers and companies uphold their ethical responsibilities, there have
been notable exceptions. The line between ethical and unethical behavior is sometimes
blurred, and decisions can be quite difficult, especially under the influence of pressure by
‘management to take a particular path. Each engineer has the responsibility to aggressively
pursue an ethical path and to help others to do the same. The consequences of unethical
behavior can be disastrous personally and collectively, while the consequence of ethical
choices (even hard ones) ultimately is a clear conscience. You should make the decision
now to always practice your profession in an ethical manner.
3.3. THE USE OF TEAMS IN SOLVING PROBLEMS
Up to now in this chapter we have discussed several steps that should be utilized by
chemical engineers as they solve problems. However, today’s engineer does not work in
a comer alone. Rather, most problem-solving is done by teams of engineers working to-
gether. These teams are often multidisciplinary, bringing together individuals with a variety
of different experiences and training. A key assumption is that the team working together
can accomplish more than the sum of the efforts of each individual team member working
alone. Unfortunately, not all teams work effectively. Our objective in this section is to pro-
vide a very brief introduction to several aspects of teamwork that help teams to function
more effectively.
3.3.1. Ingredients for a Successful Team
Ingredients that contribute to a successful team include the following!:
1. A clear mission or set of goals
2. A plan for attacking problems
3. Clearly defined roles
4, Clear communication
5, Well-defined decision procedures
6. Balanced participation
7, Established ground rules
8. Awareness of group processes36 Chapter 3
‘Solving Engineering Problems
3.3.2. Learning to Work Together
3.3.3. Diver
Even with important team ingredients (as listed above) in place, assigning a group of
people to work together does not make them an effective team. In order to work together
effectively, the members of the group must learn to accept each other and to utilize their
respective talents for the benefit of the group. How does this work in practice? Researchers.
have identified several distinct developmental stages related to groups!. The stages are
summarized in Table 3.1
‘Table 3.1. Stages of Team Development (adapted from ref. 1)
1.Forming Organization of the group, setting of rules and procedures, introductions of members
and learning a litle about each other.
2. Storming _ Emergence of conflict caused by different perspectives, experiences, backgrounds
and views, This is the time when most groups wil fail.
3. Conforming Coming to the agreement to disagree; tolerance of varying views and opinions and
perspectives. Individuals accept the team, their roles on the team, and the individu-
ality of the various team members.
4. Performing Utilization of individual differences for the benefit of the group and the work of the
group. Varying perspectives and differences are viewed as advantages rather than
hindrances
The performing stage at the bottom of Table 3.1 is the most productive stage, so the
goal is to move a team through the other developmental stages to the performing mode as
quickly as possible. Some teams are able to reach the performing stage in just a couple of
meetings, while others may take weeks or even months to reach the same level of perfor-
mance. Recognition of the stages in group development helps to smooth the transition to
the performing stage.
One of the real advantages of a team is that it brings people of different talents, abili-
ties, and experience together to work on a common objective. Itis this diversity that enables
a team to be more than just a sum of the individuals who make up the team. This diversity
can also lead to conflict (Storming, Table 3.1) as the team members learn to work together.
In order to minimize conflict and fully utilize the potential of the team, each member of the
team should have a clearly defined role. Ideally this role should correlate with the strengths.
of each individual member of the team. To describe such strengths, the responses of people
to a goal or task have been classified into the four general categories® described in Table
3.2.
Different individuals have different levels of preference for each of these modes of
action. Some people have a strong preference for a single mode (e.g., quick-starting) that
dominates their goal-driven actions. An individual may also strongly resist action in a par-
ticular mode or modes. Others are able to accommodate all four modes of action, adapting
to whatever mode is necessary. This last group of people are referred to as facilitators. Fa-
cilitators can play a very important role in team work, since they are able to work with and
accommodate individuals with various action-mode preferences.3.3. The Use of Teams in Solving Problems 37
‘Table 3.2 Characteristic Responses to a Goal or Task (adapted from ref. 2)
Fact Finder Precis, judicious and thorough, this mode deals with detail and complexity seeking
to be both objective and appropriate. Keen at observing and at gathering informa-
tion, sometimes Fact Finders ean be too judicious, seeming overly cautious as they
wait for more data. Keyword: probe.
Follow Thru Methodical and systematic, this mode is focused and structured, and brings order
and efficiency. Follow Thru people are meticulous at planning, programming, and
designing, and predictability is essential to their being. Keyword: pattern
Quick Stat With an affinity toward risk, this mode is spontaneous and intuitive, flexible, and
fluent with ideas. Quick Starters are deadline- and crisis-oriented. They need an at-
‘mosphere of challenge and change, and sometimes they can be impatient, Keyword:
innovane,
Implementer Hands-on, craft-oriented, this mode brings tangible quality to actions. Implementers,
hhave a strong sense of three-dimensional form and substance and the ability to deal
‘with the concrete, Keyword: demonstrate.
‘There are several important points that can now be made. First, people are different.
Not everyone will respond to a task in the same fashion. Understanding this fact is critical
to your success in working on teams, Second, there is not one “right” or correct mode of ac-
tion. The different modes of action represent different talents and preferences. A team pro-
vides the opportunity for these different talents to be used together to accomplish a shared
objective. Third, an attempt should be made to match an individual's talents with his or her
role on the team. It is not very productive to send someone who strongly prefers the Quick
Start mode on a fact-finding mission. Similarly, an individual who acts dominantly in the
Fact Finder mode cannot be expected to make spontaneous intuitive decisions. Ideally,
teams should be structured to take full advantage of everyone's talents. Table 3.3 outlines
‘Table 33. Roles within a Team Structure
Leader/Coordinator The leader is responsible for calling group meetings, handling or assigning
administrative details, planning team activities, and overseeing preparation
Of reports and presentations.
Observer/Summarizer This individual is responsible for observing the operation of the group and
‘summarizing key issues.
Data Gatherer ‘This individual or group of individuals is responsible for gathering data
‘needed for the team to accomplish its goals, Data gathering is typically ac-
‘complished between team meetings. It may take the form of gathering quan-
titative data or may consist of qualitative observations, and the like.
Devil's Advocate Having a devils advocate on the team is useful in probing and evaluating the
work of the team, Formal recognition and use ofthis role turns what might
be perceived as a negative contribution into a positive and important part of
the total group effort
Recorder ‘The recorder writes down the group’s decisions and edits the group's report