Professional Documents
Culture Documents
End Suction 1600series
End Suction 1600series
US
IND
ST
W
ARR A NTY
SINGLE STAGE
END SUCTION PUMPS Certified to
NSF/ANSI 372
www.FairbanksNijhuis.com
SINGLE STAGE END SUCTION PUMPS
IND
ST
Liquid handling requirements are much more involved than they were years ago.
W
The variety of liquids being handled has increased along with temperatures ARR A NTY
Features
• Offered in two models:
- 1650 close coupled
- 1620 flexible coupled-frame mounted
• 316 SST impeller MODEL 1620
• 316 SST shaft sleeve
• Double volute on 4" discharge and larger
Options
to reduce bearing loads • 316 SST shaft
• Gauge taps on suction and discharge • Drip rim base
on flanged models • Drip pan (1620 only)
• 4 power frame sizes • Flush lines
• Casing feet for easy back pullout • Epoxy coating
• Regreaseable bearings (1620 only) • Several mechanical seal options (required for temperatures over 225° F)
• Coupling guard (flex coupled design) • Oil lube bearings (flex coupled only)
• Formed steel base (flex coupled design) • Case wearing ring
2
SINGLE STAGE END SUCTION PUMPS
DF DF DF DF DF DF Motor Frame
Pump Size Disch. Suct. DD X Y Z B1 B2 G HH AA 143-184JM 213-215JM 254-256JM 284-326JM 364-404TCZ 444-449TCZ Frame AG Approx. A D
1 1/4" 1651 7.00 5.00 3.25 4.50 2.63 2.38 0.63 0.44 8.00 4.25 4.25 10.00 7.00 3.50
1.25 1.5 N/A N/A N/A N/A 143JM
(NPT) (178) (127) (083) (114) (067) (060) (016) (011) (203) (108) (108) (254) (178) (089)
1 1/2" 1651 7.00 6.00 3.13 4.63 2.44 2.56 0.63 0.44 8.00 4.75 4.75 5.31 11.00 7.00 3.50
1.5 2 N/A N/A N/A 145JM
(NPT) (178) (152) (079) (117) (062) (065) (016) (011) (203) (121) (121) (135) (279) (178) (089)
1 1/2" 1652 8.00 9.00● 3.13 5.75 2.25 3.75 0.69 0.44 11.00 4.63 4.63 5.63 5.63 11.00 9.00 4.50
1.5 2 N/A N/A 182JM
(NPT) (203) (229) (079) (146) (057) (095) (017) (011) (279) (118) (118) (143) (143) (279) (229) (114)
1 1/2" 1653 10.00 7.75 2.75 5.75 2.87 3.75 0.69 0.44 11.00 4.81 4.81 12.00 9.00 4.50
1.5 2 N/A N/A N/A N/A 184JM
(NPT) (254) (197) (070) (146) (073) (095) (017) (011) (279) (122) (122) (305) (229) (114)
7.00 6.50 3.50 4.75 2.56 2.44 0.63 0.44 8.00 4.88 4.88 5.5 5.5 14.00 10.50 5.25
2" 1651▲ 2 2.5 N/A N/A 213JM
(178) (165) (089) (005) (065) (062) (016) (011) (203) (124) (124) (140) (140) (356) (267) (133)
8.00 7.00 4.00 5.88 2.38 3.63 0.69 0.44 11.00 4.75 4.75 5.44 5.44 15.00 10.50 5.25
2" 1652▲ 2 2.5 N/A N/A 215JM
(203) (178) (102) (149) (060) (092) (017) (011) (279) (121) (121) (138) (138) (381) (267) (133)
10.00 8.00 5.50 6.50 3.23 3.77 0.88 0.50 16.00 4.44 4.44 5.31 5.31 9.13 9.13 17.50 12.50 6.25
2" 1653▲ 2 3 254JM
(254) (203) (140) (165) (082) (096) (022) (013) (406) (113) (113) (135) (135) (232) (232) (445) (318) (159)
10.00 9.00 5.50 7.25 3.00 4.00 0.88 0.50 16.00 5.38 5.38 5.38 19.00 12.50 6.25
2" 1654▲ 2 3 N/A N/A N/A 256JM
(254) (229) (140) (184) (076) (102) (022) (013) (406) (137) (137) (137) (483) (318) (159)
7.00 6.00 4.25 4.69 2.63 2.38 0.63 0.44 8.00 4.81 4.81 4.44 4.44 19.00 14.00 7.00
2 1/2" 1651▲ 2.5 3 N/A N/A 284JM
(178) (152) (108) (005) (067) (060) (016) (011) (203) (122) (122) (113) (113) (483) (356) (178)
8.00 6.75 4.00 6.00 2.44 3.56 0.69 0.44 11.00 4.94 4.94 5.56 5.56 9.56 9.56 21.00 14.00 7.00
2 1/2" 1652▲ 2.5 3 286JM
(203) (171) (102) (152) (062) (090) (017) (011) (279) (125) (125) (141) (141) (243) (243) (533) (356) (178)
10.00 9.00 6.00 8.00 3.00 4.00 0.88 0.50 16.00 5.5 5.5 5.5 22.00 16.00 8.00
2 1/2" 1653▲ 2.5 3 N/A N/A N/A 324JM
(254) (229) (152) (203) (076) (102) (022) (013) (406) (140) (140) (140) (559) (406) (203)
7.00 6.00 4.13 5.00 2.69 2.31 0.63 0.44 8.00 4.69 4.69 5.31 5.31 23.00 16.00 8.00
3" 1651▲ 3 4 N/A N/A 326JM
(178) (152) (105) (127) (068) (059) (016) (011) (203) (119) (119) (135) (135) (584) (406) (203)
8.00 7.50 4.75 6.13 2.69 3.31 0.75 0.44 11.00 4.69 4.69 5.31 5.31 9.31 9.31 26.00 17.17 9.00
3" 1652▲ 3 4 364JM
(203) (191) (121) (156) (068) (084) (019) (011) (279) (119) (119) (135) (135) (236) (236) (660) (436) (229)
10.00 9.50 5.50 7.38 3.44 3.56 0.88 0.50 16.00 4.44 4.44 5.31 5.31 9.13 9.13 26.00 17.17 9.00
3" 1653▲ 3 4 365JM
(254) (241) (140) (187) (087) (091) (022) (013) (406) (113) (113) (135) (135) (232) (232) (660) (436) (229)
10.00 9.50 5.63 8.00 3.13 3.88 0.88 0.50 16.00 5.44 5.44 9.31 9.31 32.00 19.92 10.00
3" 1654▲ 3 4 N/A N/A 404JM
(254) (241) (143) (203) (080) (098) (022) (013) (406) (138) (138) (236) (236) (813) (506) (254)
8.00 7.50 4.94 5.75 3.06 2.94 0.69 0.44 11.00 4.94 4.94 5.56 5.56 32.00 19.92 10.00
4" 1651▲ 4 5 N/A N/A 405JM
(203) (191) (125) (146) (078) (075) (017) (011) (279) (125) (125) (141) (141) (813) (506) (254)
10.00 8.00 5.00 7.00 2.69 3.31 0.75 0.44 11.00 4.69 4.69 5.31 5.31 9.31 9.31 24.00 18.00 9.00
4" 1652▲ 4 5 364TCZ
(254) (203) (127) (178) (068) (084) (019) (011) (279) (119) (119) (135) (135) (236) (236) (610) (457) (229)
10.00 9.75 5.56 7.25 3.41 3.59 0.88 0.50 16.00 4.5 4.5 5.38 5.38 9.19 9.19 24.00 18.00 9.00
4" 1653▲ 4 5 365TCZ
(254) (248) (141) (184) (087) (091) (022) (013) (406) (114) (114) (137) (137) (233) (233) (610) (457) (229)
11.00 10.00 6.00 8.56 3.25 3.75 0.88 0.50 16.00 5.06 5.06 8.88 8.88 27.25 20.00 10.00
4" 1654▲ 4 5 N/A N/A 404TCZ
(279) (254) (152) (218) (083) (095) (022) (013) (406) (129) (129) (226) (226) (692) (508) (254)
10.00 8.50 5.81 6.25 3.63 2.38 0.69 0.44 11.00 5.18 5.18 5.81 5.81 9.5 28.75 20.00 10.00
5" 1651▲ 5 6 N/A 405TCZ
(254) (216) (148) (159) (092) (060) (018) (011) (279) (132) (132) (148) (148) (241) (730) (508) (254)
11.00 10.00 6.00 7.50 3.19 3.81 0.88 0.50 16.00 5.06 5.06 5.69 5.69 9.69 9.69 31.13 22.00 11.00
5" 1652▲ 5 6 444TCZ
(279) (254) (152) (191) (081) (097) (022) (013) (406) (129) (129) (145) (145) (246) (246) (791) (559) (279)
11.00 10.50 5.44 7.94 3.44 3.56 0.88 0.50 16.00 5.44 5.44 9.25 9.25 31.13 22.00 11.00
5" 1653▲ 5 6 N/A N/A 445TCZ
(279) (267) (138) (202) (087) (091) (022) (013) (406) (138) (138) (235) (235) (791) (559) (279)
12.00 13.00 6.00 9.00 5.19 5.81 1.00 0.63 23.00 5.56 5.56 9.38 9.38 39.63 22.00 11.00
5" 1654▲ 5 6 N/A N/A 447TCZ
(305) (330) (152) (229) (132) (148) (025) (016) (584) (141) (141) (238) (238) (1006) (559) (279)
11.00 10.50 7.00 8.25 4.13 2.88 0.88 0.50 16.00 6.19 6.19 39.63 22.00 11.00
6" 1651▲ 6 8 N/A N/A N/A N/A 449TCZ
(279) (267) (178) (210) (105) (073) (022) (013) (406) (157) (157) (1006) (559) (279)
12.00 11.00 6.13 8.47 5.63 5.38 1.00 0.63 23.00 5.81 5.81
6" 1652▲ 6 8 N/A N/A N/A N/A
(305) (279) (156) (215) (143) (137) (025) (016) (584) (148) (148)
12.63● 13.38● 6.50 9.31 5.50 5.50 1.00 0.63 23.00 8.38 8.38 9.44 9.44
6" 1653▲ 6 8 N/A N/A
(321) (340) (165) (237) (140) (140) (025) (016) (584) (213) (213) (240) (240)
15.00 14.00 8.00 11.00 5.50 5.50 1.00 0.63 23.00 8.19 8.19 9.25 9.25
8" 1652▲ 8 10 N/A N/A
(381) (356) (203) (279) (140) (140) (025) (016) (584) (208) (208) (235) (235)
www.FairbanksNijhuis.com
SINGLE STAGE END SUCTION PUMPS
V
X
H BOLT SIZE
2.60 4.00
(66) (102)
G 1/2 NPT
AC P1 P2 CONNECTIONS
AD E E
B1 B2 A
Pump Pwr.
Size Frame Disch Suct D X Y Z P1 P2 B1 B2 G H E A AC AD CP U V Key
1-1/4" 1621 7.00 5.00 3.25 4.50 1.63 1.38 2.63 2.38 0.63 0.44 3.25 8.00 8.35 12.93 17.81 0.88 2.13 .19(5) SQ. x
1 1-1/4 1-1/2
(NPT) (178) (127) (083) (114) (041) (035) (067) (060) (016) (011) (083) (203) (212) (328) (452) (022) (054) 1.38(35) LNG
1-1/2" 1621 7.00 6.00 3.13 4.63 1.44 1.56 2.44 2.56 0.63 0.44 3.25 8.00 9.03 13.59 18.16 0.88 2.13 .19(5) SQ. x
1 1-1/2 2
(NPT) (178) (152) (079) (117) (037) (040) (062) (065) (016) (011) (083) (203) (229) (345) (461) (022) (054) 1.38(35) LNG
1-1/2" 1622 8.00 9.00• 3.13 5.75 1.44 2.94 2.25 3.75 0.69 0.44 4.56 11.00 8.92 13.48 18.05 0.88 2.13 .19(5) SQ. x
1 1-1/2 2
(NPT) (203) (229) (079) (146) (037) (075) (057) (095) (017) (011) (116) (279) (227) (342) (458) (022) (054) 1.38(35) LNG
1-1/2" 1622 8.00 9.00• 3.13 5.75 1.44 2.94 2.25 3.75 0.69 0.44 4.56 11.00 12.19 18.62 23.19 1.13 3.13 .25(6) SQ. x
2 1-1/2 2
(NPT) (203) (229) (079) (146) (037) (075) (057) (095) (017) (011) (116) (279) (310) (473) (589) (029) (079) 1.75(45) LNG
1-1/2" 1623 10.00 7.75 2.75 5.75 1.94 2.94 2.87 3.75 0.69 0.44 4.56 11.00 8.60 13.16 17.85 0.88 2.13 .19(5) SQ. x
1 1-1/2 2
(NPT) (254) (197) (070) (146) (049) (075) (073) (095) (017) (011) (116) (279) (218) (334) (453) (022) (054) 1.38(35) LNG
7.00 6.50 3.50 4.75 1.56 1.44 2.56 2.44 0.63 0.44 3.25 8.00 9.08 13.63 18.70 0.88 2.13 .19(5) SQ. x
2" 1621◊ 1 2 2-1/2
(178) (165) (089) (005) (040) (037) (065) (062) (016) (011) (083) (203) (231) (346) (475) (022) (054) 1.38(35) LNG
8.00 7.00 4.00 5.88 1.56 2.81 2.38 3.63 0.69 0.44 4.56 11.00 8.94 13.50 19.07 0.88 2.13 .19(5) SQ. x
2" 1622◊ 1 2 2-1/2
(203) (178) (102) (149) (040) (071) (060) (092) (017) (011) (116) (279) (227) (343) (484) (022) (054) 1.38(35) LNG
8.00 7.00 4.00 5.88 1.56 2.81 2.38 3.63 0.69 0.44 4.56 11.00 11.85 17.69 23.22 1.13 3.13 .25(6) SQ. x
2" 1622◊ 2 2 2-1/2
(203) (178) (102) (149) (040) (071) (060) (092) (017) (011) (116) (279) (301) (449) (590) (029) (079) 1.75(45) LNG
10.00 8.00 5.50 6.50 2.23 2.77 3.23 3.77 0.88 0.50 7.00 16.00 7.93 12.52 20.22 0.88 2.13 .19(5) SQ. x
2" 1623◊ 1 2 3
(254) (203) (140) (165) (057) (070) (082) (096) (022) (013) (178) (406) (201) (318) (514) (022) (054) 1.38(35) LNG
10.00 8.00 5.50 6.50 2.23 2.77 3.23 3.77 0.88 0.50 7.00 16.00 11.06 16.87 24.59 1.13 3.13 .25(6) SQ. x
2" 1623◊ 2 2 3
(254) (203) (140) (165) (057) (070) (082) (096) (022) (013) (178) (406) (281) (428) (625) (029) (079) 1.75(45) LNG
10.00 9.00 5.50 7.25 2.00 3.00 3.00 4.00 0.88 0.50 7.00 16.00 11.34 17.25 24.65 1.13 3.13 .25(6) SQ. x
2" 1624◊ 2 2 3
(254) (229) (140) (184) (051) (076) (076) (102) (022) (013) (178) (406) (288) (438) (626) (029) (079) 1.75(45) LNG
7.00 6.00 4.25 4.69 1.63 1.38 2.63 2.38 0.63 0.44 3.25 8.00 8.94 13.50 19.38 0.88 2.13 .19(5) SQ. x
2-1/2" 1621◊ 1 2-1/2 3
(178) (152) (108) (005) (041) (035) (067) (060) (016) (011) (083) (203) (227) (343) (492) (022) (054) 1.38(35) LNG
8.00 6.75 4.00 6.00 1.63 2.75 2.44 3.56 0.69 0.44 4.56 11.00 9.03 13.62 19.22 0.88 2.13 .19(5) SQ. x
2-1/2" 1622◊ 1 2-1/2 3
(203) (171) (102) (152) (041) (070) (062) (090) (017) (011) (116) (279) (229) (346) (488) (022) (054) 1.38(35) LNG
8.00 6.75 4.00 6.00 1.63 2.75 2.44 3.56 0.69 0.44 4.56 11.00 11.93 17.75 23.37 1.13 3.13 .25(6) SQ. x
2-1/2" 1622◊ 2 2-1/2 3
(203) (171) (102) (152) (041) (070) (062) (090) (017) (011) (116) (279) (303) (451) (594) (029) (079) 1.75(45) LNG
10.00 9.00 6.00 8.00 2.00 3.00 3.00 4.00 0.88 0.50 7.00 16.00 11.47 17.28 25.28 1.13 3.13 .25(6) SQ. x
2-1/2" 1623◊ 2 2-1/2 3
(254) (229) (152) (203) (051) (076) (076) (102) (022) (013) (178) (406) (291) (439) (642) (029) (079) 1.75(45) LNG
7.00 6.00 4.13 5.00 1.69 1.31 2.69 2.31 0.63 0.44 3.25 8.00 8.73 13.24 19.11 0.88 2.13 .19(5) SQ. x
3" 1621◊ 1 3 4
(178) (152) (105) (127) (043) (033) (068) (059) (016) (011) (083) (203) (222) (336) (485) (022) (054) 1.38(35) LNG
7.00 6.00 4.13 5.00 1.69 1.31 2.69 2.31 0.63 0.44 3.25 8.00 11.60 17.43 23.22 1.13 3.13 .25(6) SQ. x
3" 1621◊ 2 3 4
(178) (152) (105) (127) (043) (033) (068) (059) (016) (011) (083) (203) (295) (443) (590) (029) (079) 1.75(45) LNG
8.00 7.50 4.75 6.13 1.81 2.56 2.69 3.31 0.75 0.44 4.56 11.00 8.54 13.19 19.72 0.88 2.13 .19(5) SQ. x
3" 1622◊ 1 3 4
(203) (191) (121) (156) (046) (065) (068) (084) (019) (011) (116) (279) (217) (335) (501) (022) (054) 1.38(35) LNG
Notes:
1. Dimensions are approximate. 4. Use Extra Large power frame with impeller diameters larger than 12.5 (318).
2. All dimensions are in inches (mm) and may vary ± 1/4 (6). 5. Power Frames 2 and 3 have the same external dimensions.
3. Not for construction purposes unless certified. ◊ Available in 250 lb./125lb. flanges
• Dimensions do not match Bell & Gossett
4 4
SINGLE STAGE END SUCTION PUMPS
www.FairbanksNijhuis.com 5
SINGLE STAGE END SUCTION PUMPS
Performance Data
520
510
500
3550 RPM
490
480
2" 1623
470
460
450
440
430
420 1-1/2" 1622
410
400
390
380
370
360
350
340
4" 1623
330
320 2" 1622 2-1/2" 1622
310
3" 1622
300
290
280
270
260 4" 1622
250
240
TOTAL DYNAMIC HEAD-FEET
230
220
210
200
190
180
170 1-1/4" 1621
160
150
4" 1621
140
130
2" 1621 3" 1621
120
21
2-1/2" 1621
110
16
5" 1621
100
/2"
1-1
90
80
70
60
50
40
30
20 3550 RPM
Enclosed Impeller
10
0
0 50 100 200 300 400 500 750 1000 1250 1500 1750
CAPACITY-GPM
70
5" 1622 6" 1621
60
3" 1622
4" 1622
50
2"
21 "
40 16
16-1/4
21
4" 1621
1
2- 621
21
62 1
20 1 5" 1
1-
1770 RPM
10 Enclosed Impeller
0
0 50 100 200 300 400 500 750 1000 1250 1500 2000 2500 3000 4000
CAPACITY-GPM
6
SINGLE STAGE END SUCTION PUMPS
Performance Data
2950 RPM 180
160
4" 1624
140
3" 1624
120
100
HEAD (m)
2" 1623
3" 1623
4" 1623 5" 1623
80
1-1/2" 1622
3" 1622
60
2" 1622
2-1/2" 1622
22
5" 1622
16
4"
40
20
1-
2950 RPM
Enclosed Impeller
0
5 10 100 1000
FLOW (m3/hr)
1475 RPM 50
45
40
5"
2"
16
4"
1
24
62
16
4
24
35
3"
16
1-1/2" 1623
24
2-1/2
6" 16
"
23
1623
30
HEAD (m)
25
1-1/2" 1622 2" 3" 4"
16 16
5"
16 23
23 23
8" 162
162
3
20 2-1
2
/2"
6"
16
16
2" 1622 22
22
5"
15 16
4"
22
16
3"
22
6" 1621
16
22
10 2" 1621
1-1/4" 1621
www.FairbanksNijhuis.com 7
Engineering Specifications
1600 Series Specifications
The contractor shall furnish (and install as shown on the plans) Material of Construction
Fairbanks Nijhuis® model (1650 horizontal close coupled) Pump Part Stainless Fitted
(1620 horizontal flexible coupled) back pull out centrifugal pump size Casing Cast Iron ASTM A48
Impeller 316 Stainless Steel
___ x ___ x___ of stainless fitted construction.
Seal Plate /Motor Bracket Cast Iron ASTM A48
Each pump shall have a capacity of ___gpm at ___ ft of total head, Shaft Steel AISI 1018
Sleeve 316 SST
with a temperature of ___˚ F, ___ specific gravity. Each pump is to
Power Frame (1620)
be furnished with a mechanical seal with all metal parts to be 303 SST (1, 2, 3, or 21)
Cast Iron ASTM A48
with Buna-N elastomers, ceramic seat, and carbon washer. The unit 303 stainless steel metal parts,
Mechanical Seal “Buna-N” elastomer parts,
must be equipped with a stainless steel shaft sleeve that extends the Ceramic seat and carbon washer
length of the seal plate. The pump shaft extension shall be gasket
sealed from the pumped liquid. Impellers to be 316 SST, dynamically Design Details
balanced, and key locked to the shaft. Area Description Power Frame
1 2 3 21A
Flexible Coupled Frame Mounted (1620) Rotation from driver end CW CW CW CW
Pump and motor are to be mounted on a common fabricated steel Diameter at impeller 0.88 1.25 1.25 1.63
Diameter at shaft sleeve 1 1.38 1.38 1.75
base plate. The shaft is to be steel, installed in a cast iron power
Pump Shaft Diameter between bearings 1.38 1.94 2.38 3.25
frame. Pumps shall have a shaft design of .002" deflection at the seal Diameter at coupling end 0.88 1.13 1.13 2.38
face with the pump running under maximum load condition. Greased Coupling key–square 0.19 0.25 0.25 0.63
ball bearings have a 3-year minimum life (AFBMA B10) under the Max. deflection at seal face 0.002 0.002 0.002 0.002
maximum condition of load. Bearing (inboard radial) 206K 308K 310K 313
Bearing (outboard thrust) 206KG 308KG 310KG 5313
The pump shall be flexible coupled to a standard horizontal NEMA Ball Bearings
Bearing centers 5.69 7.69 7.69 9.63
___ hp ___ phase ___ Hertz ___ volts ___ rpm (open drip proof) Bearing type Ball Ball Ball Ball
Min B10 bearing life 3 3 3 3
(totally enclosed fan cooled) motor. Alignment shall be checked under maximum load years years years years
in accordance with the standards of the Hydraulic Institute after Outside diameter
Sleeve 1.13 1.50 1.50 2
of sleeve 1620 series
installation and there shall be no strain transmitted to the pumps.