Professional Documents
Culture Documents
RCC MCQ 2
RCC MCQ 2
The limiting moment of resistance of a singly reinforced beam of size 200mm * 500mm
(effective) reinforced with Fe415 is (M15 grade concrete)
(a) 103.5 kN-m
(b) 69 kN-m
(c) 90 kN-m
(d) 235.4 kN-m
Answer A
(a) fy /1.5
(b) fy /0.87
(c) 0.87 fy
(d) 0.27 fy
Answer (C)
03. In limit state design of concrete structures, the recommended partial safety factor ‘γm’ for steel
according to IS:456-2000
a. 1.5
b. 1.15
c. 1.0
d. 0.87
Answer (B)
04. In limit state design, the limiting value of depth of neutral axis for M15 and Fe 250 is
a. 0.53 d
b. 0.48 d
c. 0.45 d
d. 0.43 d
Answer (A)
05. In coastal region minimum grade of concrete for R.C.C is
a. M15
b. M20
c. M25
d. M30
Answer (D)
a. Deflection
b. Cracking
c. Torsion
d. Durability
Answer (C)
07.Deflections of doubly reinforced beams are _______ compared to singly reinforced beams of same
depth
a. more
b. less
c. equal
d. None
Answer (B)
08. In rectangular single reinforced RCC beam, maximum shear stress occurs
Answer (C)
a. Ꚍv > Ꚍc
b. Ꚍv > Ꚍc, max
c. Ꚍv < Ꚍc
d. Ꚍv < Ꚍc, max
Answer (B)
11. Shear span is defined as the zone
a. B.M is zero
b. S.F is zero
c. S.F is constant
d. B.M is constant
Answer (C)
12. The percentage of minimum shear reinforcement as per IS: 456-2000 using mild steel
a. 0.12
b. 0.15
c. 0.183
d. 0.30
Answer (C)
13. The lap length for bars in bending tension shall not be less than
a. Ld or 30 Φ
b. 2 Ld or 30 Φ
c. Ld or 24 Φ
d. 2 Ld or 24 Φ
Answer (A)
14. A reinforced concrete slab is 75 mm thick. The maximum size of reinforcement bat that can be
used is
a. 12 mm dia
b. 10 mm dia
c. 8 mm dia
d. 6 mm dia
Answer C
a. 125 mm
b. 150 mm
c. 100 mm
d. 200 mm
Answer A