Professional Documents
Culture Documents
Cv. Pesona Rattan Nusantara: Technical Report: (7118) 303-0058
Cv. Pesona Rattan Nusantara: Technical Report: (7118) 303-0058
ANTO
EXECUTIVE SUMMARY:
The sample rated as PASS with satisfactory result in all conducted test(s)
Bureau Veritas This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of
Consumer Products Services, Inc. issuance of this report at http://www.bureauveritas.com/cps and is intended for your exclusive use. Any copying or
replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with
Indonesia Branch our prior written permission. This report sets forth our findings solely with respect to the test samples identified
Gedung KKM, 2nd Floor, Jl. Cideng herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the
lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted.
Timur No.38 Jakarta, Indonesia Our report includes all of the tests requested by you and the results thereof based upon the information that you
Telephone: 6221-6348877 provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission
caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the
Fax: 6221-6348838 issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified
website: www.bureauveritas.com/cps acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.
CV. PESONA RATTAN NUSANTARA
Technical Report: (7118) 303-0058
November 01, 2018
Page 2 of 5
SUMMARY OF EXAMINATION
1. BS EN 581-1:2017
Clause Description Results Comment
5.1 General PASS --
5.2 Tubular components PASS --
5.3 Shear and squeeze points
5.3.1 Shear and squeeze points when erecting, adjusting NA See Note III
and folding away
5.3.2 Shear and squeeze points under the influence of NA See Note III
powered mechanisms
5.3.3 Shear and squeeze points during use PASS --
2. BS EN 581-2
Clause Description Result Comments
4 General test conditions (Preconditioning) NT See Note I
-- Defect observed before testing PASS --
6.1 & 7.1 General safety requirements (BS EN 581-1) PASS --
6.2 Stability, strength and durability for non-loungers
EN 1728-2012 6.4 Seat and back static load test PASS --
EN 1728-2012 6.5 Seat front edge static load PASS --
EN 1728-2012 6.17 Seat and back durability test PASS
EN 1728-2012 6.11 Arm rest static load NA See Note III
EN 1728-2012 6.19 Durability test on seating with a multi-position back NA
See Note III
rest
EN 1728-2012 6.20 Arm rest durability test NA See Note III
EN 1728-2012 6.15 Leg forward static load PASS --
EN 1728-2012 6.16 Leg sideways static load PASS --
EN 1728-2012 6.24 Seat impact test PASS --
EN 1728-2012 6.8 Foot rest static test NA See Note III
EN 1022-2005 Forwards stability PASS --
EN 1022-2005 Rearwards stability PASS --
EN 1022-2005 Sideways stability PASS --
6.1 & 7.1 General safety requirements (BS EN 581-1) PASS --
CV. PESONA RATTAN NUSANTARA
Technical Report: (7118) 303-0058
November 01, 2018
Page 3 of 5
2. BS EN 581-2
7.2 Stability, strength and durability for lounger
EN 1728-2012 8.2 Seat and back static load test NA See Note III
EN 1728-2012 8.3 Additional seat and leg rest static load NA See Note III
EN 1728-2012 8.4.1 Seat and back durability test for seating NA See Note III
EN 1728-2012 8.4.2 Additional seat durability test NA See Note III
EN 1728-2012 8.5 Durability test on back rest mechanism NA See Note III
EN 1728-2012 8.6 Arm rest static load NA See Note III
EN 1728-2012 8.7 Arm rest durability test NA See Note III
EN 1728-2012 8.8 Impact test NA See Note III
EN 1728-2012 8.9 Lifting test for mobile loungers NA See Note III
A.1.2 Forward stability NA See Note III
EN 1022 Rearward stability
EN 1022:2005 6.6 Rearward stability for upright position NA See Note III
EN 1022:2005 7.5 Rearward stability for most reclined position NA See Note III
A.1.1 Sideways stability NA See Note III
6.1 & 7.1 General safety requirements (BS EN 581-1) NA See Note III
8. Information for use
8.1 Information for use - General NA See Note III
8.2 Information for use – Marking for mobile loungers NA See Note III
Note II No defect was observed prior to testing; the sample was assembled as per the
manufacturers provided instructions.
Josephine Indriati
Hardline Manager
THIS REPORT IS GOVERNED BY, AND INCORPORATES BY REFERENCE, THE CONDITIONS OF TESTING AS POSTED AT THE DATE OF ISSUANCE OF THIS REPORT AT
http://www.bureauveritas.com/cps AND IS INTENDED FOR YOUR EXCLUSIVE USE. ANY COPYING OR REPLICATION OF THIS REPORT TO OR FOR ANY OTHER PERSON OR ENTITY, OR USE
OF OUR NAME OR TRADEMARK, IS PERMITTED ONLY WITH OUR PRIOR WRITTEN PERMISSION. THIS REPORT SETS FORTH OUR FINDINGS SOLELY WITH RESPECT TO THE TEST SAMPLES
IDENTIFIED HEREIN. THE RESULTS SET FORTH IN THIS REPORT ARE NOT INDICATIVE OR REPRESENTATIVE OF THE QUALITY OR CHARACTERISTICS OF THE LOT FROM WHICH A TEST
SAMPLE WAS TAKEN OR ANY SIMILAR OR IDENTICAL PRODUCT UNLESS SPECIFICALLY AND EXPRESSLY NOTED. OUR REPORT INCLUDES ALL OF THE TESTS REQUESTED BY YOU AND THE
RESULTS THEREOF BASED UPON THE INFORMATION THAT YOU PROVIDED TO US. YOU HAVE 60 DAYS FROM THE DATE OF ISSUANCE OF THIS REPORT TO NOTIFY US OF ANY MATERIAL
ERROR OR OMISSION CAUSED BY OUR NEGLIGENCE; PROVIDED, HOWEVER, THAT SUCH NOTICE SHALL BE IN WRITING AND SHALL SPECIFICALLY ADDRESS THE ISSUE YOU WISH TO RAISE.
A FAILURE TO RAISE SUCH ISSUE WITHIN THE PRESCRIBED TIME SHALL CONSTITUTE YOUR UNQUALIFIED OF THE COMPLETENESS OF THIS REPORT, THE TESTS CONDUCTED AND THE
CORRECTNESS OF THE REPORT CONTENTS.
C/N: MC64534/J/Ma/Jo
REPORT
Lab Numbers: (7118) 303-0058
COVER PICTURE #1
COVER PICTURE #2
Page 5 of 5