This program uses an 8086 trainer kit to interface LEDs and switches. It loads the value 90 into the AL register, sets the port address for the LEDs to FF36, and outputs the value to turn on the LEDs. It then enters a loop where it inputs the switch value to AL, outputs it to the LED port FF32, and continuously loops to read the switches and display to the LEDs.
This program uses an 8086 trainer kit to interface LEDs and switches. It loads the value 90 into the AL register, sets the port address for the LEDs to FF36, and outputs the value to turn on the LEDs. It then enters a loop where it inputs the switch value to AL, outputs it to the LED port FF32, and continuously loops to read the switches and display to the LEDs.
This program uses an 8086 trainer kit to interface LEDs and switches. It loads the value 90 into the AL register, sets the port address for the LEDs to FF36, and outputs the value to turn on the LEDs. It then enters a loop where it inputs the switch value to AL, outputs it to the LED port FF32, and continuously loops to read the switches and display to the LEDs.