Professional Documents
Culture Documents
Catalog T
Catalog T
QUALITY EQUIPMENT
DISTRIBUTORS, INC.
INDUSTRIAL X-RAY
MAGNETIC PARTICLE
LIQUID PENETRANT
BLACKLIGHTS
ULTRASONICS
VISUAL
LEAK DETECTION
POSITIVE MATERIAL IDENTIFICATION
NDT EDUCATIONAL KITS
QUICK
REFERENCE
GUIDE
MAIL & PHYSICAL
ADDRESS
70 Benbro Drive
Cheektowaga, NY 14225
WEB ADDRESS
HOURS
Film Illuminators
Film Viewing
Accessories
Magnifying Glass
• High grade crown glass lens with
very sharp and clear magnified im-
age
• 3" dia. Lens 2.5 times with imbed-
ded small lens 7/8" dia. For 5X com-
pound magnification
• Overall length 6 ½"
Portable Film Viewer
Model 87-C1
The Model 87-C1 is completely constructed
of electro-galvanized steel and painted with
Deluxe Twin X-Ray Illuminator durable, textured blue polyurethane enamel.
The variable dimmer allows precise control
Model 65-C1
of the light source for positive film interpre-
The Model 65-C1 X-ray illuminator is a com-
tation.
plete viewing system, containing a large flat
panel, with an additional high intensity spot. Product Features:
• Variable light intensity control
Product Features:
• Fan cooled for prolonged operation
• Complete with Foot Switch, lamps and
• Convenient carrying handle Pocket Comparators
8-foot, 3-wire power cord
• 5.25" x 4.75" glass view screen 7X and 10X Pocket-size measur-
• Viewing Window 14" x 17"
• 300 watt lamp ing and inspection comparators are
• High-intensity spot for reading films of 4.0
• Face plate will accept optional iris dia- available. Highly accurate measure-
D or greater
phragm ments are obtained with sharp photo
• Delron film holder for main screen
• Convenient cord wrap for transport and etched reticles.
storage ease
• Optional Foot Switch control
Personal Dosimetry
Direct-Reading Dosimeter with Sapphire NDS Products Rate Alarm Meter
Window Model W138 Model RA-500
The W138 Direct-Reading Dosimeter is a pocket-size, This rugged cast aluminum belt worn unit
carbon-fiber electroscope with an ion chamber for meets NRC 10 CFR 34.33 for personal moni-
detection and indication of integrated exposure to toring. It detects gamma and x-rays. The
Gamma and x-ray radiation (0-200mR). It has a thin system test includes battery and alarm tests.
wall which permits the penetration and detection Alarm output is 100 decibles at six inches.
of radiation. This model comes with a hardened Uses a 9 volt battery and is factory calibrated
sapphire window that won’t scratch even in the and certified for one year.
toughest of conditions.
Dosimeter Chargers
Arrow-Tech Dosimeter
Charger Model 909B
The Model 909B Charger LED
Reading Light reduces re-ze- Arrow-Tech Piezoelectric
roing time and effort by elimi-
nating the need to remove the Dosimeter Charger
dosimeter from the charger for Model 750-6
reading. Simply view the scale while the dosimeter is resting lightly The Handheld 750-6 Piezoelectric
on the charger contact after re-zeroing. Reading in the same orienta- Dosimeter Charger can zero a variety of quartz or carbon fiber dosim-
tion as charging also minimizes the effect that gravitational induced eters by simply squeezing the lever of the piezoelectric generator. The
fiber movement has on dosimeter accuracy and precision. The Model charger requires absolutely no batteries...ever! By pulling the trigger,
909B Charger charging contact is spring-loaded and has a positive a dosimeter is easily placed in or removed from the Charger. The
mechanical stop. This design feature makes it virtually impossible to clamping action automatically holds the dosimeter for you. Ideal for
damage dosimeters through excessive charging force. using in Field Operations.
Warning Signs
Exposure Aids
QED Is Now Stocking
Pistol Grip Control Unit
Mobile Darkrooms!! The Pistol Grip Control Unit is comprised
of the hand crank and gearbox, a pair of
control housings, a teleflex drive cable
and a safety connector assembly.
Industrial Tapes
Cloths and vinyl/cloth radiographic industrial tapes. Tapes are a
necessary item for all dark rooms. Handy for the repair of cassettes
and other applications. We also stock filament and masking tape for
your convenience.
The separate lid is die cut design and printed with spaces allowing for all pertinent information as to
the pipeline owner, engineering company, contractor, radiography contractor, job numbers, film num-
bers, etc. The lid also has a printed grid that allows an inventory of radiographs to be taken without
calculating how many odd number films each box contains.
Fluorescent
Safelight
Our economy model screws into any existing wall or ceiling outlet. KODAK Industrex M37
Made of aluminum. Filtration is from a GBX type filter. The tabletop INDUSTREX M37 is ideal
for automatic processing in mid-volume
facilities. While compact, it offers the
output you need and the excellent im-
age quality and reliability you demand.
Quality Assurance Product Features:
• Ease of operation with nine program-
mable-controlled processing chan-
INDUSTREX Process nels
Control Strips • Economical medium-range processor with capacity of 27 sheets/
INDUSTREX Process Control Strips pro- hour (35cm x 43cm) in the recommended processing cycle
vide a quality control tool for processing • Compact design for smaller labs or environments
systems, in accordance with ASTM E 999 • Comes with a table stand as standard
and EN 584-2 standards. • Filtered developer solution that reduces film artifacts
Every pack contains: • Intermediate rinse rack bath system
• 25, 6 x 24 cm preexposed strips in individual READY-PACK II • Can be used in stand-alone darkroom or through-the-wall installa-
packaging. Each strip contains a 10-step wedge to X-ray radia- tions
tion • Automatic film-in detection utilizing a pulsed infra-red sensor bar
• A control chart to record test results showing compliance with • Automatic chemical replenishment system for developer and fixer
the standards • Automatic heating for developer and fixer
• Detailed instructions for use • Automatic anti-oxidation and anti-crystallization cycles
• A certificate for compliance • Separate drainage for developer, fixer and wash chemicals
Carestream INDUSTREX
Carestream
INDUSTREX Flex GP,
HR and XL Blue
Digital Imaging Plates
Carestream INDUSTREX Digital
Imaging Plates are a natural fit
for computed radiography in NDT
applications. Their digital imaging plates offer the flexibility of film without the need for wet
processing, allowing you to capture and read images quickly and easily, both in the field and
in the lab.
Product Features:
• Flexible – Wrap around most shapes
• Sharp – Better resolution than high-speed films, and a suitable replacement for many ap-
plications HPX-1 Digital Plate Carrier
• Available in Multiple Sizes – To cover a wide range of applications The HPX-1 Digital Plate Carrier offers a new
• Portable – With the Carestream INDUSTREX HPX-1 Digital System, image capture in remote way to scan small or irregular shaped imag-
areas is easier than ever ing plates using your HPX-1 Digital System.
• Versatile – Use in a rigid or flexible cassette Its easy-to-use design will have you up and
• Efficient – Phosphor plates can be erased and reused thousands of times, require less expo- running in minutes. No matter what the
sure than film, and provide faster image access shape (as small as 1" x 1"), the carrier will
• Certified – When used with Carestream INDUSTREX HPX-1 Digital Systems, all plates meet deliver.
requirements for the highest system class: EN 14784-1 and ASTM E 2446
Product Features:
• Carrier offers a simple, cost effective and
FLEX GP FLEX HR FLEX XL BLUE convenient way to run small or irregular
GENERAL PURPOSE HIGH RESOLUTION ULTRA HIGH RES shaped plates on your HPX-1 system
RESOLUTION SIZE CATALOG NUMBER • Scans one or multiple plates simultane-
3.5 x 10 Inch - 8094922 1012699 ously, increasing workflow
3.5 x 17 Inch - 1904267 1012723 • Accommodates virtually any size/shape
4.5 x 10 Inch 1004266 1680214 1012624 plates (down to 1" x 1") that fit within the
4.5 x 17 Inch 8584534 1466945 1012608 scan area
5 x 7 Inch 1880723 8491615 1012681 • Robust design built for a minimum of 300
7 x 17 Inch 1355478 1848688 1012640 scans under the worst conditions
8 x 10 Inch 8520454 1775576 1012632 • Unique design allows for simple applica-
10 x 12 Inch 8640344 1174424 1012574 tion and removal of imaging plates
14 x 17 Inch 1008564 8360521 1012665 • Flexible construction with a special sur-
14 x 36 Inch 8908204 1434257 1012590 face finish holds plates securely in place
14 x 51 Inch 1432772 - - • Easy to read grid divided into 5 cm incre-
14 x 60 Inch 1124460 8082596 1012657 ments makes identifying the dimension of
14 x 85 Inch 8542276 - - the scan area simple
70mm x 20.3 cm - - 1012731 • Carrier grid printed in blue for easy read-
70mm x 25.4 cm - 8802324 1012707 ing in low light conditions
70mm x 43 cm - 8348641 1012715 • Custom case included for secure storage
70mm x 8 Inch - 8002230 - and transport
70mm x 13 Inch - - 1012764
70mm x 24 Inch - 1006105 1012756
70mm x 36 Inch - 1004746 1012749
Carestream INDUSTREX
MAGNAVIS/ MAGNAGLO
WET METHOD FLUORESCENT MAGNETIC PARTICLES
PART NUMBER DESCRIPTION CONTAINER SIZE
01-0130-57 14A Fluorescent Particles to be mixed with Carrier II or Water/Additives 1 lb.
01-0130-71 14A Fluorescent Particles to be mixed with Carrier II or Water/Additives 6/1 (1lb.)
01-0130-75 14A Fluorescent Particles to be mixed with Carrier II or Water/Additives 20 lbs.
01-1725-38 14A Aqua-Glo Fluorescent Premix with Water Case of 9 - 16 oz Aerosols
01-0179-71 20B Preblended Dry Mix Fluorescent Particles 6/1 (1lb.)
01-0179-70 20B Preblended Dry Mix Fluorescent Particles 15 lbs.
01-0179-84 20B Preblended Dry Mix Fluorescent Particles 30 lbs.
01-0145-79 14AM Fluorescent Premix with Carrier II Case of 9 - 16 oz Aerosols
01-0145-40 14AM Fluorescent Premix with Carrier II 5 Gallon Drum
01-9130-35 14A Redi-Bath Fluorescent Premix Concentrate for Water 4/1 Gallons
01-9130-41 14A Redi-Bath Fluorescent Premix Concentrate for Water 6/27 oz.
01-0199-84 MG-3410 Fluorescent Particles to be Mixed with Water 30 lbs.
01-0191-59 MG-410 Fluorescent Particles to be Mixed with Carrier II or Water/Additives 2 lbs.
WET METHOD VISIBLE MAGNETIC PARTICLES
PART NUMBER DESCRIPTION CONTAINER SIZE
01-1116-66 7C Black Visible Particles to be mixed with Carrier II or Water/ Additives 8 lbs.
01-1580-79 7HF Black Visible Premix with Carrier II Case of 9 - 16 oz Aerosols
01-2250-79 WCP-2 White Contrast Paint Case of 9 - 16 oz Aerosols
OIL PETROLEUM VEHICLE
PART NUMBER DESCRIPTION CONTAINER SIZE
01-2122-30 Carrier II Oil Vehicle 20 Gallon Drum
01-2122-40 Carrier II Oil Vehicle 5 Gallon Drum
01-2122-45 Carrier II Oil Vehicle 55 Gallon Drum
DRY METHOD MAGNETIC PARTICLES
PART NUMBER DESCRIPTION CONTAINER SIZE
01-1716-69 #1 Gray General Purpose 10 lbs.
01-1716-87 #1 Gray General Purpose 45 lbs.
01-1732-69 #2 Yellow General Purpose 10 lbs.
01-1732-87 #2 Yellow General Purpose 45 lbs.
01-1748-87 #3A Black General Purpose 45 lbs.
01-1780-69 #8A Red General Purpose 10 lbs.
01-1780-87 #8A Red General Purpose 45 lbs.
WATER BATH ADDITIVES
PART NUMBER DESCRIPTION CONTAINER SIZE
01-2190-40 AX-52 Corrosion Inhibitor 5 Gallon Drum
01-2148-63 WA-2B Water bath Additive 5 lbs.
01-2173-40 WC-1 Water bath Additive 5 Gallon Drum
01-9410-20 ZAF-2 Antifoaming Additive 1 Gallon
Magnetometer Model 25
Magnetic Hand Held Blower Rugged, pocket-size meters used to indi-
Model PB-1 cate residual magnetism remaining in part
Lightweight, easy to use spray bottle for applying after magnetization. Available in scales
dry powders (cap removes for easy refilling). Inter- ranging from 10-0-10, 20-0-20, 100-0-100
nal magnet allows measured amount of powder to with or without certifications.
be sprayed at each puff.
• Variable Depth QQI Model# KSC4-234. Parker Y-300 & Y-400 Probe Lights
Used for more quantitative work, three The Parker Y-300 and Y-400 Probe Lights are molded inspection lights
concentric circular flaws of differing depth. designed to fit the B-300, DA-400 and B-100 Contour Probes. The
Flaws depth of 20%/30%/40% of Shim thick- lights offer enhanced visible method detection of flaws and disconti-
ness, .004" thick. nuities under low or no-light situations.
Magnaflux
Magnavis Y-1 AC Magnetic Yoke Product Features:
The Magnavis Y-1 AC Magnetic Particle In- • Up to 30% lighter than other yokes
spection Yoke is the new generation of light • Ergonomically angled body with soft grip
weight, ergonomically designed yokes that for improved arm and wrist positioning
improve job performance and productivity • Trigger style on/off switch
by reducing operator arm and wrist fatigue • Impact, chemically resistant outer shell
when testing in tight, confined and overhead • Field serviceable to reduce downtime
areas. • Reinforced eyelet for hands-free carrying
• Improved cord strength
Portable Units
PARKER RESEARCH PRODUCT SPECIFICATIONS (BOTH MODELS) MAGNAFLUX PRODUCT SPECIFICATIONS (BOTH MODELS)
MODEL DA-750 MODEL DA-1500 MODEL P-70 MODEL P-1500
Length 17 1/2" 21 5/32" Length 17 1/2" 22"
Width 9 1/16" 9 11/32" Width 9" 9 1/2"
Height 7 13/16" 9 17/32" Height 7 1/2" 9 1/2"
Maximum Output Current Ratings 750 amps, AC or HWDC 1500 amps, AC or HWDC Maximum Output Current Ratings 750 amps, AC or HWDC 1500 amps, AC or HWDC
Based on the use of Two 15’ 4/0 Ca- Based on the use of Two 15’ 4/0 Ca-
bles Line Voltage Single Phase bles Line Voltage Single Phase
Line Voltage Single Phase 115 VAC, 50/60 Hz 230 VAC, 50/60 Hz Line Voltage Single Phase 115 VAC, 50/60 Hz 230 VAC, 50/60 Hz
230 VAC, 50/60 Hz 460 VAC, 50/60 Hz 230 VAC, 50/60 Hz 460 VAC, 50/60 Hz
Line Current 26 amps @ 115 VAC 45 amps @ 230 VAC Line Current 26 amps @ 115 VAC 42 amps @ 230 VAC
13 amps @ 230 VAC 23 amps @ 460 VAC 13 amps @ 230 VAC 21 amps @ 460 VAC
Maximum Duty Cycle 2 minutes ON 2 minutes ON Maximum Duty Cycle 2 minutes ON 2 minutes ON
2 minutes OFF 2 minutes OFF 2 minutes OFF 2 minutes OFF
Unit Weight 35 lbs. 93 lbs. Unit Weight 35 lbs. 93 lbs.
QED services ALL Magnetic Particle makes and models including equipment manufactured by
Magnaflux, Gould-Bass, Parker Research and Magwerks, just to name a few. In addition, we offer
in-house commercial calibration services and on-site calibration services. All calibrations meet or
exceed ASTM and MIL Standards. Call us today for more information or to set up a visit.
Magnaflux M-Series a.
Magnaflux understands some parts cannot be moved, so the magne-
tizing station needs to be brought to the part. The M Series offers a
solution by providing an adaptable mobile unit. These units feature
AC or Half Wave DC output. Output rating is based on Load Specified.
Note: M-2030 for long cable output is designed for applications in b.
which the power source cannot be close to the inspection piece. This
unit designed to work with long cable lengths necessary for inspect-
ing large parts (i.e. power generator parts). c.
Product Features:
• Two heavy-duty fixed casters and two swivel casters with locks for
easy, safe movement
• AC/HWDC current selector eliminates the need to switch between
bulky cables on the output terminal
• Set current with power pack dial or standard remote control pen-
dant (can be moved up to 15' from power pack) d.
• Digital amperage meter display (meter now holds the value of the
last current shot)
• Pulse function
Cables, Connectors and Remote Devices
• Locate defects in any direction using prods, central conductor, or
coil (wrap part with 3-5 turns of cable) a. Cables
• Dimensions: 44" L x 22" W x 39" H Rubber-covered flexible cables are available in standard lengths of 15'
• Many voltages available, single phase and 20' with a choice of either end or lug connectors. Custom cables
• Infinitely variable current control and replacement connectors are also available upon request.
• Three (3) Year Parts and Labor Warranty
b. Connectors
Connectors for attaching 4/0 cables to magnetizing equipment, in-
cluding Wet Benches, Powerpacks, Mobile Units.
Should you have a special need not met by any
c. Remote Control Cable
of the standard units in our current equipment 15' cable allows remote energizing of portable power packs. Standard
lineup, our engineering group will happily w/ 3 PTL plug.
provide designs and pricing for a custom built
unit to meet your inspection needs. d. Remote Palm Button
Remote palm button mounts on side of MAG Kit for energizing current
from power pack standard w/ 3 PTL plug.
Magnaflux MD Series
The Magnaflux Multi-Directional units are the most versatile standard
units. The MD Series offers time savings multidirectional magnetiza-
tion for finding defects in all orientations with one cycle. The two or
three outputs are independently adjustable to balance the magnetic
field intensity, and each output offers AC, HWDC or One Phase FWDC
output. The user can mix and match current types while adjusting
current levels creating virtually infinite combinations for the operator. Central Conductors
These combinations allow the machine to be used with a wide range These solid copper rods provide circular magnetization of hollow
of parts, while the Customer Programmable Settings insure repeat- parts. Three sizes are Available: .50" Dia. x 15.875" Length, .75"
ability whether you process the same part every day or once a year. Dia. x 15.875" Length & 1.00" Dia. x 15.875" Length.
Supervisor Locks keeps stored settings safe from inadvertent varia-
tion.
Visible Red Dye Water Washable Penetrants (Type II, Method A & C)
Magnaflux Met-L-Chek Sherwin Aerosol Case 1 Gallon 4 x 1 Gallon 5 Gallon 55 Gallon
SKL-WP VP-30 SKL-WP SKL-WP
VP-30 DP-50 VP-30 VBP-300 VP-30 VP-30
SKL-WP DP-50 DP-50 SKL-WP VBP-300 VBP-300
VBP-300 DP-51 DP-50 DP-50
DP-51 DP-51 DP-51 DP-51
Test Blocks
Hand Sprayers
Aluminum Test Block
The Aluminum Test Block is an
Tri-Con Hydro-Wash Spray Gun aluminum test piece that mea-
A sturdy Tri-Con spray wash gun meeting sures 3" x 2" x 3/8" with a 1/8" wide
MIL-I-6866 and ASTM E 1417 requirements. groove that splits the face in half.
The Tri-Con gun is available with or The test block is used to check the
without the full jet nozzle that emits strength of “in-use” penetrants. This is done by processing one half
coarse spray without air pressure. Used of the block with “used” penetrant, and the other half with fresh pen-
for both pre and post rinsing of etrant. Complies with ASTM E165 and ASME Boiler and Pressure Ves-
water-washable or post-emulsifiable penetrant methods. sel code.
Product Features:
• Air injection boosts velocity to permit faster rinsing of hollow or
rough surface parts Stainless Steel Test Block
• Advantageous for areas with low or fluctuating water pressure The stainless steel test block offers a
simple and convenient comparator for
monitoring the washability of water-wash
or post-emulsified penetrants. The “grit blasted”
Water Spray Gun finish provides a rough surface which will retain
Water spray gun for pre and post background when the removability of a product has decreased when
rinsing of water-wash or post- compared to fresh material. The test block should be thoroughly
emulsifiable penetrant system parts. cleaned with a Cleaner/Remover, as well as periodically refinished
Providing optimal coarse spray to (grit blast).
help prevent part over-washing.
Test Panels
PSM-5 Test Panel
The “Penetrant System
Monitoring Panel” provides a
Dry Developer Spray Gun quick means of determining the
Manual spray gun that delivers a light, even, dry continued serviceability of liquid
developer coating. penetrant inspection systems: fluorescent or
Product Features: visible; water-washable; post-emulsifiable, or
• Uses shop compressed air (dry) pre-wash. The PSM-5 panel is a stainless steel panel, 0.090" thick and
• Features mix, jet and spread controls measuring 4" x 6" and is manufactured to P&WA specifications. A
• One quart capacity chrome or grit plated strip runs the length of one side of the panel.
Five cracked starbursts are evenly spaced in the chrome or grit plating
in order of magnitude; the largest is readily visible with low sensitiv-
ity penetrants, while the smallest is difficult to observe even with high
sensitivity materials.
Comparators
Crack Comparators NiCr Penetrant Test Panels
NiCr test panels are ideal penetrant
Crack comparators are used to measure
sensitivity comparators. They come in
the actual size of indications identified dur-
pairs, with panel set crack depths
ing the penetrant inspection process. Our
available in 10, 20, 30 and 50 microns.
General Purpose Comparator measures
NiCr test panels allow “in use”
crack sizes in inches ranging from 0.005"
fluorescent penetrants to be
to 0.125" and the Pratt & Whitney Approved
compared against “new, unused”
Comparator measures crack sizes in inches
product to determine if the
between 0.010" to 0.180".
penetrant is performing properly.
General Pratt &
Purpose Whitney
Surface Temperature
Thermometer
Refractometer Bitmap A dual magnet surface temperature
A refractometer is an easy to use thermometer, designed to measure
laboratory or field device to measure the concentration of the Hydro- temperatures of many different surfaces. The
philic Remover in water and is required to meet Pratt and Whitney and bimetallic sensor is a specially processed alloy,
GE concentration specifications for hydrophilic removers. preconditioned and pre-tested for permanent calibration and maxi-
mum stability. The thermometer reaches sensing equilibrium within
three minutes, and is accurate within 2%.
FC-100 Series
High-Intensity UV Lamps
The Spectroline FC-100 series ZB-100F Fan-Cooled
(FC-100, FC-150 & FC-100M) lamps Ultraviolet Black Light
include a built-in fan to ensure cool The Magnaflux ZB-100F Portable
operation. These light weight, safe and convenient UV lamps are er- Black Light System produces long wave
gonomically designed for extended hand held use. The lamp head ultraviolet light at 365 nanometers.
can also be rotated 360 degrees when mounted on a transformer A built-in, quiet operating fan located at
base. An 8 foot cord extends from the lamp handle to the ballast, and the rear of the ZB-100F lamp housing dramatically reduces operating
another 8 foot cord runs from the ballast to the power source. temperatures to under 85°F, for improved operator safety and comfort
while simultaneously expanding bulb life.
Product Features:
• FC-100 - Nominal steady-state UV-A intensity of 4,800 μW/cm² at Product Features:
15” • Cool running for increased safety and comfort
• FC-150 with Built-In-Ballast- Nominal steady-state UV-A intensity of • Extended bulb life for greater operating efficiency
4,500 μW/cm² at 15" • Polycarbonate bezel shields operator’s hands from lens
• FC-100M – Is a direct replacement lamp for use with Magnaflux • Cord-through-handle design reduces operator fatigue
equipment • Rugged aluminum housing and reinforced fiberglass handle
• 5,000-hour average rated bulb life • Recessed lens for bulb protection
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
BIB-150P Built-In-Ballast
UV Lamp
The unique Built-In-Ballast 150-watt
bulb eliminates the need for a heavy,
external transformer. This lamp is a favorite
with NDT inspectors because it provides
super-high UV-A intensity at an
economical price. Also, the light weight
and ergonomic design ensures easy handling for long inspections.
Available in either concentrated spot or broad-beam versions. Both
models come standard with an 8 foot (2.4 m) power cord. ZB-150F-SB Ultraviolet Self Ballasted Black Light
Product Features: The Magnaflux ZB-150F-SB Portable Self-Ballasted Black Light of-
• Concentrated spot configuration has a nominal steady-state UV-A fers the same outstanding performance as the popular ZB-100F Fan-
intensity of 4,500 μW/cm2 at 15" Cooled Black Light but is self-ballasted. Meaning no transformer to
• Broad-beam configuration has a nominal steady-state UV-A inten- pull along as you perform inspections.
sity of 3,000 μW/cm2 at 15" Product Features:
• Space-age engineering polymer housing is impact-resistant and • Cool running for increased safety and comfort
dent-proof • Polycarbonate bezel shields operator’s hands from lens
• Vinyl-coated, stainless-steel, wraparound caging protects against • Cord-through-handle design reduces operator fatigue
burns and acts as a lamp stand • Rugged aluminum housing and reinforced fiberglass handle
• Easily meets ASTM UV-A intensity specifications for FPI and MPI • Recessed lens for bulb protection
Stationary Lamps
Replacement Parts
UV-400 Series Superflood
These super-powerful and versatile lamps have & Accessories
been specially engineered for fluorescent pen-
etrant and magnetic particle inspection, parts
degreasing inspections and wash station inspec-
tions.
Product Features:
• Powerful, 400-watt metal halide bulb, combined
with tempered, heat-resistant low solarization
UV filters provide the highest intensity over the
largest area
• Easily mounts over automated magnetic par-
ticle systems or above penetrant inspection
booths for the most accurate inspections of even the largest parts
• Unique twin-filter system eliminates hazardous UV-B and UV-C radiation escaping from
lamp
• Compact design and built-in mounting features allow lamps to be positioned anywhere –
even in previously inaccessible areas
Bulbs
UV-400A UV-400B
The UV-400A features a concentrated-beam The UV-400B features a unique broad-beam 100S
reflector designed to assure the highest con- reflector designed to provide NDT inspec- Spot Bulb, Ad-Medium Base, 100 Watt
centrated UV-A intensity available. It has a tors with maximum uniformity of cover- for SB-100P and FC-Series Lamps.
nominal steady-state UV-A intensity of 8,000 age over the largest area. It has a nominal
μW/cm² at lamp center, measured at 15". Ir- steady-state UV-A intensity of 4,000 μW/cm² 100S/M & 507320
radiates an area as large as 16” x 10”, produc- at lamp center, measured at 15". The lamp Spot Bulb, Medium Base, 100 Watt for
ing a nominal steady-state UV-A irradiance irradiates an area as wide as 20" x 12" with Spectroline (SB-100P and FC-Series
of not less than 2,000 μW/cm². unmatched uniformity, producing a nominal Lamps) and Magnaflux (ZB-100F and
steady-state UV-A irradiance of not less than ZB-100F-MB) black lights.
2,000 μW/cm².
BLE-150CS-115/M
Concentrated Spot Bulb, Self-Ballast-
Bench and Display UV Lamps ed, 150 Watt for BIB-150P Series Lamps
(115 Volt Version).
BLE-150BS-115/M
Broad-Beam Bulb, Self-Ballasted, 150
Watt for BIB-150P Series Lamps (115
Volt Version).
BLE-150FC-115/M
Concentrated Spot Bulb, Self-Ballast-
ed, 150 Watt for FC-150 Lamp (115 Volt
X-series lamps are ideally suited for applications where high-intensity, wide-area UV cover- Version).
age is required. Constructed of rugged metal with sturdy mounting brackets, these units are
available in various combinations of long, medium and/or short wave UV. The complete line BLE-400
also offers lamps in a wide choice of various intensities, sizes and-wattage, including single or Metal Halide Bulb, 400 Watt for Super-
double UV tubes. A corrosion-resistant aluminum reflector optimizes UV irradiance while all Flood UV-400 Series Lamps
short and medium wave models feature our unique LONGLIFE filter glass to ensure high initial
UV intensity. These versatile lamps are also a key component of our CL-150 UV photodocu-
mentation system. They offer easy wavelength interchangeability making this system ideal for 519296
numerous applications requiring a darkened environment. Spot Bulb, Self-Ballasted, 150 Watt for
Magnaflux ZB-150 FSB black light.
NDT Couplants
Environmentally Friendly Couplants
Ultragel II
Ultragel II possesses outstanding acoustic Sonoglide FE
performance, chemical characteristics and Sonoglide FE is an environmentally benign, Silicone-free cou-
corrosion inhibition and is ideal for flaw de- plant specially formulated for ferrous metals where short-term
tection, thickness gauging, flow metering corrosion is a concern. It contains a ferrous corrosion inhibitor
and acoustic emission testing across a broad with a relative effectiveness rating of 75, is slow drying and will
temperature boundary (-10º to 210º F). Fer- remain stable on corroded or salt covered surfaces. Operating
rous corrosion inhibition rating of 90. temperature range: -60º to 250º F.
Sonoglide UP
Sonoglide UP couplant is compatible with titanium, aluminum,
copper, stainless steel, plastics, many magnesium alloys, and
many composites. It is the perfect choice for applications where
Halogens and Sulfur must be at a minimum and broad material
compatibility, slow drying and water wash removability are de-
sired. Operating temperature range: -60º to 250º F.
Sonotrace
Sonotrace is the perfect couplant for use
with applications where Halogens, Sulfur Soundclear
and low melting point metals must be kept Soundclear contains humectants to slow drying and increase
to a minimum. It comes in two viscosities acoustic impedance and has an operating temperature range of
from medium viscosity to a very high viscos- 20º to 200º F. Soundclear contains a corrosion inhibitor for steel
ity gel and has an operational temperature with a relative effectiveness rating of 45 and is compatible with
range of 25º - 175º F. Ferrous corrosion inhi- aluminum, titanium and plastics. It is not recommended for use
bition rating of 80. with magnesium.
UT-X Powder
UT-X Powder retains viscosity on salt caked boiler tubes, cor-
roded pipe, structural steel, steel billets, plates and welds. It pos-
sesses an operating temperature range of 32º to 120º F.
Sono High Z
The Sonotech family of Sono couplants High Z couplant is formulated to reduce sur-
comes in temperature formulas of 600º face noise and improve coupling performance
through 1100º F. The product’s biodegradable on curved, rough, pitted and corroded surfac-
formulas have made it the leading choice for es. Its environmentally benign formula can be
use in flaw detection, thickness gauging and removed with water and it will often facilitate
acoustic emission testing in the petrochemi- flaw inspection and thickness gauging when no
cal, power generation, food processing ma- other couplant will function. High Z is avail-
chinery and pharmaceutical manufacturing able in two viscosities (low viscosity and high
and storage equipment markets. viscosity) with an operating temperature range
of 0º to 200º F. High Z has a ferrous corrosion
inhibition rating of 70.
Shear Gel
Shear Gel couplant possesses an extremely high viscosity and comes
with an operational temperature range of 40º to 90º F and a ferrous
corrosion inhibition rating of 85.
Pyrogel Thermasonic
Pyrogel couplant is radiation Thermasonic couplant is en-
proof, contains no polymers vironmentally benign, offers
and resists drying, making it an excellent corrosion inhibition,
excellent choice for long term resists running and dripping
flow metering applications. Fer- and has a slow evaporation
rous corrosion inhibition rating rate. Ferrous corrosion inhibi-
of 100. tion rating of 85.
UTL1
UTL3
Hole Saws
The fastest and easiest way to cut accu-
rate holes for installation of inspection
plugs is with powered hole saws, and IPS
supplies the best. These are heavy-duty
System V industrial saws to make your job faster
and easier.
TML EPDM Available Inspection Labels Include:
• Carbide Grit Edge Hole Saws are made of tungsten carbide par-
ticles bonded to alloy steel for cutting extremely hard and abrasive
materials. Recommended for stainless steel jacketing.
• Bi-Metal Hole Saws are of heavy-duty bi-metal construction for
longer service life. 4/6 variable tooth provides faster, smoother
System II cuts. Recommended for aluminum jacketing.
Thickness Gauges
Cygnus 3 Data Logger
The Cygnus 3 Data Logger is versatile and easy
to program with simple menu operation. Three
separate formats are used to collect measure-
ments and provide solutions to recording vari-
ous geometries such as tanks, cylinders, pipes
Cygnus 1 Heavy Duty and structures.
The Cygnus 1 Heavy Duty Product Features:
is a tough, rugged • Simple Linear Data Logging mode with a ca-
Ultrasonic Thickness Gauge pacity of up to 5000 points in each record
using our Multiple Echo • Alphanumeric data entry via phone style
technology, designed for use keys
in demanding environments • Velocity Lookup Table can be customized by the user
indoors or outdoors. The Cygnus • Supplied with - Data Logger Manager Software for generating re-
1 Heavy Duty is supplied ready to use ports and transferring data between the gauge and computer - Mi-
as a complete kit in a protective carry case. crosoft Excel add-in to easily import data into blank worksheets or
Product Features: Excel templates
• Heavy duty sealed unit – highly water / dirt / • Gauge senses probe type and automatically adjusts setting for op-
dust resistant timum performance
• Stable calibration – linear accuracy – no zero adjustments • DEEP COAT mode for coating up to ¾" (20mm) thick
• Self verification of the measurements to ensure accuracy • Rugged probe cable designed for superior flexibility
• Echo strength indicator to aid measurement
• Automatic probe recognition
• Easy calibration using convenient buttons
• DEEP COAT mode measuring through coatings up to ¾" (20 mm)
Cygnus 4 General Purpose
A compact general purpose Ultrasonic
Thickness Gauge gives accurate, error-
checked, through-coating measurements
using our Multiple Echo technology. Highly
versatile for use in most hand-held indus-
trial or shipping applications. The LCD dis-
play is easily read outdoors and perfect for
use in all light conditions, with automatic
white back light control. Menu-driven op-
eration and “Deep-Coat” mode allow easy
thickness gauging through coatings up to
20 mm. Cygnus 4, supplied in an IP65 rat-
ed/sealed aluminum enclosure, protective
silicon sleeve and clip is extremely light,
tough and simple to use.
Cygnus 2 Hands Free
A tough, rugged Ultrasonic Thickness Gauge using our Multiple-echo
technology, designed for one handed operation. The Cygnus 2 is sup-
plied ready to use as a complete kit in a protective carry case.
Microgage VX
Product Features:
The Microgage VX is an Ultrasonic A-Scan pre-
• Water tight housing rated 1P67 (30 minute submersion – NOT FOR
cision thickness gauge, capable of high speed
DIVING)
scanning at 32 measurements per second. A
• Heavy duty sealed unit – highly water/dirt/dust resistant
“B-Scan” feature enables the display of a mate-
• Rugged construction – shock proof
rial’s cross section. A Pencil tip transducer is
• Stable calibration – linear accuracy – no zero adjustments
available for blended areas, small external pits
• Self verification of the measurements to ensure accuracy
and small diameter components. Application
• Displays sound velocity settings digitally via keypad
environments include NDT within the Aero-
• Echo strength indicator to aid measurement
space and Plastics industries, the Stamping in-
• Automatic probe recognition
dustry; thin walled component testing.
• DEEP COAT mode measuring through coating up to ¾" 20 mm)
Thickness Gauges
T-Gage IV
The T-Gage IV is a simple Betagage
to use hand-held Ultra- The Betagage is an affordable yet versatile
sonic Thickness Gauge. ultrasonic thickness / corrosion gauge utiliz- CT-Gage DL/DL+
This basic model has the ing a variety of viewing options to suit the The CT-Gage has been designed as a multi-
ability to be calibrated to operator and application, with A-Scan and B- purpose Ultrasonic material and Coating
a variety of different materials using one or Scan capability. Thickness gauge with a wide range of fea-
two point calibration. The T-GAGE IV comes
Product Features: tures. The CT-Gage is able to simultaneously
as a complete kit, ready to use, and is backed
• A-Scan Display for verification of flaw/pit and independently measure the material and
by 5 year limited warranty. The T-GAGE IV of-
• Timed B-Scan display for cross sectional the coating thickness, or switch to the time
fers features that make your job easier and
view based B-Scan view to see a cross section
has been built to perform in the roughest of
• Large digits view for simple thickness view of the material you are inspecting. The
industry conditions.
readout DL and DL+ models offer the data logging
• Measures to first echo (flaw/pit) or echo- features and the storage of A-Scan measure-
T-Gage IV+ echo (thru paint) ments. The CT-Gage offers the end user 5
The T-Gage IV+ is a hand-held Ultrasonic • Hi and Lo tolerance limits with audible and different measurement modes: Pulse-Echo,
Thickness Gauge offering extended features visual alarms Pulse Echo w/coating, Echo-Echo, Pulse Echo
to make on site work easier, built to perform • Fast Scan mode holds minimum thickness w/temperature compensation and Coating
in the roughest of industry conditions. The reading only mode.
T-Gage IV+ can be calibrated to a variety of • Internal Data Logger stores 12,000
different materials using one or two point readings/A-scans
calibration and comes as a complete kit, • 3 x AA batteries give 150 hours of opera-
ready to use, and is backed by 5 year limited tion
warranty.
T-Gage IV MM
The T-Gage IV MM provides the ultimate in
versatile technology for thickness gauge use
in the field. This rugged, ergonomic unit
combines features such as Fast Scan, Alarms
(audible/visual) and Data Logging capa-
bilities together with a Multi-Mode feature;
used for reading through and eliminating
the thickness of paint or coatings on various
materials. Microgage II
Steelgage II The Microgage II is a simple to use hand-held
T-Gage IV DL The Steelgage II Ultrasonic Thickness Gauge precision thickness gauge designed with the
The T-Gage IV DL is a hand-held Ultrasonic is the ideal choice for testing steel day after end user in mind, producing fast and ac-
Thickness Gauge offering extended features day. Applications include Corrosion and Pit- curate readings. The Microgage II P has a
and an internal Data Logger. Constructed to ting, Tube and Pipe, Tanks and Boilers. Set “plastics” mode, making this gauge ideal for
perform in the roughest of industry condi- with a single material velocity, simply turn it plastics thickness measurement.
tions the T-Gage IV DL can be calibrated to on and measure.
a variety of different materials using one or
two point calibration.
Flaw Detectors
iFlaw Digital
Ultrasonic Flaw
Detector
Thickness Gauges Danatronics Corp. proudly
introduces iFlaw, a por-
table digital ultrasonic flaw
detector. Finally, a user
friendly completely touch
screen, sunlight readable
instrument. Designed with
more than 5 decades of ex-
perience, iFlaw utilizes the
latest in micro electronic design with many practical, useful features.
iFlaw is designed and built with many practical features such as a built in gyroscope to
allow the user to automatically rotate the display from Landscape to Portrait mode. In
EHC-09 WAVE Ultrasonic addition, iFlaw has a built in light sensor that can automatically set the display to the
Thickness Gages optimal contrast.
Danatronics is proud to introduce the world’s
smallest and only ultrasonic thickness gage with When it comes to portable ultrasonic inspection, iFlaw can meet your every demand
high resolution COLOR waveform display, The from an angle beam inspection with built-in trig function or dual thickness test with fast
EHC-09 WAVE. Unique features include live COL- 60 Hz display update rate and on-board datalogging to interfacing with Encoders and
OR A-Scan, Encoded B-Scan, 100K thickness read- TOFD applications; iFlaw has it all. Some customers prefer the display and orientation
ing (2600 waveforms) datalogger with interface in landscape mode while others like a portrait display orientation…don’t worry, iFlaw
program, vibration and COLOR change of wave- can automatically rotate thanks to its built in gyroscope. iFlaw offers a 7” wide full VGA,
form on alarm. The Live Waveform is critical in sunlight readable display with complete touch screen capability. Simply touch what you
many applications requiring Waveform or A-Scan want to adjust and go. iFlaw even has some dynamic controls for click and drag such as
verification to ensure the displayed thickness val- gates, echo height (gain or dB), range and delay...it can’t get any easier!
ue is correct. Typical applications at refineries and
nuclear plants are the most critical including boil- Product Features:
er tubes, high temperature piping and pressure • 7" wide VGA Sunlight readable, Touch Screen Display
vessels. The Live COLOR Waveform ensures the • Automatically rotates image from landscape to portrait mode
thickness readings are correct. Bond Inspection, • Removable 32 GB mini SD card for “unlimited” storage
Phase Reversal, High Temperature Measurements, • 30 Mhz. adjustable square wave pulser
Foreign object, De- lamination, Excessive wall • Auto light sensing for display contrast
thinning, Echo to Echo to ignore coatings, mode • As light as 2.5 lbs
converted echoes, lobe skipping and doubling are • 8 Hr. battery life
typical applications where the COLOR WAVE is the • Field upgradeable software options DAC, TVG, Floating Gate,
ideal solution. • Interface Gate, Echo to Echo, Back Echo Attenuator, Encoded
• B-scan and more
The WAVE is available in Three Models, EHC-09 C, • Multiple screen languages
EHC-09 CW and EHC-09DL CW. The WAVE is also • Click and drag control gates, range, delay and gain
compatible with Ultrapipe software. The WAVE is • 2 gates standard
now available with delay line and pencil probes • Dynamic Echo Height Indicator (DEHI)
ideal for hard to reach areas, radiused parts, thin • Designed for IP67 rating for dust and moisture
materials and high temperature applications. Ver- • TOFD/Encoder input
sions 1.9 and higher now support the use of angle • HDMI, USB, Video and Alarm output
beam transducers to display the sound path com- • Custom engineered durable case
ponents of detected echos. The WAVE also support • 1 year warranty
multiple on screen languages including: English, • Vibrate on alarm
Italian, Spanish, French, Czech, Finnish and Ger- • Change color on alarm
man and more. New, version 2.1 or higher (avail- • Auto Calibration
able from the support tab) now contains on-screen • Fast, 60 Hz. update rate
calibration instructions for all new gages. • Extensive datalogging in multiple file formats
MASTERSCAN SERIES
Sitescan 250
Sitescan 123 The Sitescan 250 Ultrasonic Flaw Detector is
The ideal Training School Flaw Detector. The at the top of the Sitescan range. This model
123W is a simple to operate flaw detector includes all the software features of the 150S
and is used by the world’s leading NDT train- combined with a narrow band amplifier and
ing organizations. With the user interface TCG for more demanding ultrasonic NDT
becoming familiar in minutes technicians applications. The square wave ActiveEdge TM
Masterscan 350M
can concentrate on operation and learning pulser automatically optimizes for each filter The Masterscan 350M upholds the heritage
ultrasonic theory. band selected, ensuring maximum perfor- of the Masterscan name and capability. Up
mance. to the minute developments in amplifier and
pulser technology deliver higher levels of
near surface resolution, penetrating power
and excellent signal to noise ratio. Typical
applications are thin walled components,
turbine blades, spot welds, power genera-
tion (including EMATs), large castings and
forgings.
Sitescan D10+
Sitescan 150 The Sitescan D+ Series of Ultrasonic Flaw
The Sitescan 150 is a Fully Featured Broad- Detectors deliver high performance and ad-
band Ultrasonic Flaw Detector. With a vanced features, via an ergonomic and user
broadband amplifier the Sitescan 150 is focused interface design. The enhanced
enhanced with all the software features re- menu navigation scroll-wheel enables fast
navigation through functions via the menu Masterscan 380
quired to improve operator efficiency and ac-
structure, designed to guide the user through The Masterscan 380M employs latest de-
curacy. These include standard sizing tools,
their tasks, with operation quickly becoming velopments in amplifier and pulser technol-
advanced measurement modes, full screen
second nature. The Sitescan D10+ uses a ogy, delivering higher levels of near surface
waveform display, thickness reading memo-
broadband amplifier compatible with a wide resolution, penetrating power and excellent
ry and an automatic calibration feature.
range of transducers for a spectrum of NDT signal to noise ratio. Typical applications are
applications including weld inspection, cor- thin walled components, turbine blades, spot
rosion testing, small castings, forgings and welds, power generation (including EMATs),
delamination checking. large castings and forgings.
Phased Array
Phased Array (PA) ultrasonics is an advanced meth- Product Features:
od of ultrasonic non destructive testing which Phased Array
can be used in any application environment where • Configuration 16:64 (16 pulser/receivers; driving up to 64 elements)
• Transducer Socket I-PEX
traditional ultrasonic flaw detectors can be used. • Pulse Voltage -50 V to 100 V (in steps of 10 V)
Ultrasonic Phased Array technology is now an es-
Data Acquisition
tablished method for advanced NDT testing appli- • Architecture Full digital delay and sum architecture
cations. Phased Array techniques allow the user • Digitizing Frequency 50/100 MHz
to control parameters such as beam angle and fo- • Digitizer Resolution 12 bits
cal distance to create an image of the test part, • Data Processing 16 bits samples
• Data recording Full raw data recorded
enhancing defect detection and speed of testing.
• Max A-Scan Length 8192 samples (32 meters in steel LW, 50MHz,
Typical applications include Weld Inspection, Crack 1:128)
Detection, Corrosion Mapping, Aerospace and Com- Scan & Views
posite Testing. • Supported Scans S-Scan & L-Scan
• Real Time Views S, L, B, C-Scan, Top and End view
• Color Maps 8 Standards (Rainbow, Grayscale, Spectrum, Aeronau-
tic or custom)
• Multi Group Multiple Sector scans and TFOD
• CONVENTIONAL UT/TOFD (MONO ELEMENT CHANNELS)
• No. of Channels 2 TX/RX (2 multiplexed channels)
• Test Mode Pulse-Echo, transmit/receive, TOFD
Receivers
• Gain Range 102dB (-30dB to 72dB)
• Filter Bands Narrow bands centered at 0.5 MHz, 1 MHz, 2.25 MHz 5
MHz, 10 MHz and 15 MHz; Broadband at 1 MHz to 18 MHz (-6dB)
• CONVENTIONAL AND PHASED ARRAY
DAC
• DAC Quantity 1 with 3 sub-DAC (per focal law in PA)
• Time Corrected Gain (TCG)
VEO Phased Array Flaw Detector Gates
The VEO’s robust design, intuitive user interface and extensive online • A-Scan Gates 4 gates per A-scan (3 extracted A-scans per S/L-scan)
help bring the power of Phased Array to the field based technician. • Gate Trigger Flank/Peak
• S/L-Scan 2 “2D gates” per S/L-scan
The menu system is intuitive and application and workflow driven, • Alarm LED 1 (sync on all gates & DACs)
with set up and operation swiftly becoming second nature. Integrated • Measurements Available in A-Scan view
Help and Wizards guide the user through scan set up whilst Optimiza- • 1D Peak (FSH, dB, D, BPL, SD)
tion Tips ensure the VEO always performs at the highest level. • 1D Flank (FSH, dB, D, BPL, SD)
• Echo to Echo
The unique 3D ScanPlan view gives immediate visual confirmation of VEO 16:64 Accessories
correct set up and ultrasound coverage, even in complex multi-probe • Splash Proof USB Keyboard
applications. • Waterproof Mouse
• Battery Charger
Fast and efficient wizards for sound velocity, wedge delay, TCG, DAC, • Tripod
TOFD setup and Encoder calibration are all provided as standard. • Lithium-Ion Battery pack
• UT Studio – Professional edition
The powerful VEO platform unlocks a new level of performance in a • Quick Trace Encoder
portable instrument, helping you to maximize your efficiency on-site. • Rapidscan to VEO adapter
The Inspection Plan shows the operator in 2D and 3D where probes • DAAH Array probe cable
are positioned on the test part, simplifying the inspection setup and • USB Memory Stick
providing an inspection reference for reporting. Using the latest com- • Phased Array Test Block Steel
puter technology data can be permanently recorded for processing • Phased Array Test Block Aluminum
and report generation.
4-Step Wedge
Thickness and linearity calibration. This 4-Step block comes in thick-
ASTM E2491 PA Assessment Block nesses of .250", .500", .750" and 1.000". Step face measures .750" x
The ASTM E2491 Phased Array Assessment Block is a general pur- .750". Fitted wooden storage case optional. In accordance with ASTM
pose Phased Array calibration block used for beam characterization E797.
and evaluation of system performance characteristics. Use it as base-
line block to determine long-term instrument performance changes,
generate DAC curves, and evaluate linear/angular resolution, focus-
ing ability and beam steering capability. With a variety of targets, this
small, lightweight block is also perfect for customer demonstrations
of phased array ultrasonic’s capabilities. This block is also referred to
as a “Type B” block.
Product Features:
• Dimensions: 150mm x 100mm x 25mm
• Any alloy available upon request
• In accordance with ASTM E2491 5-Step Wedge
• Four (4) angled holes (30°, 45°, 60°, 75°) at 1.5mm diameter Thickness and linearity calibration. This 5-Step block comes in thick-
• Array of 18 holes on 25mm radius at 1.0mm diameter nesses of .100", .200", .300", .400" and .500". Step face measures
• Array of 18 holes on 50mm radius at 2.0mm diameter .750" x .750". Fitted wooden storage case optional. In accordance
• Vertical column of 16 holes at 1.0mm diameter with ASTM E797.
• Angled row of 12 holes at 1.5mm diameter
• Machine-engraved tick mark at radii centerline
• Machine-engraved block description, alloy, and unique serial no.
IIW-Type 1 Block
Used for calibration of shear and longitudinal transducers, and veri-
fication of shear wedge exit point and refracted angle. Can also be
used for resolution and sensitivity checking. In accordance with: IIW Mini Angle Beam
(International Institute of Welding) and ASTM E164, U.S. Customary This miniature angle beam block is also known as a “Rompas” block
Block. or simply “Angle Beam,” and it is the ASTM and U.S. Air Force substi-
Product Features: tute for the DSC block for distance, beam index, refracted angle and
• Dimensions: 1.0" x 4.0" x 12.0" sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius,
• 4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with
slot, and 1.0" radiussed slot x .060" deep x .120" wide ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
• Any alloy available upon request Product Features:
• Optional fitted wooden storage case • Dimensions: 6.000" x 3.000" x 1.000" (152.4 mm x 76.2 mm x 25.4
mm)
• Any alloy available upon request
• Fitted wooden storage case optional
IIW-Type 2 Block
A modified version of the original IIW-Type 1 design. Includes a 2.0"
radius x .250" deep cut-out superposed on the 4.0" radius for distance
calibration. Also includes numbers 3, 5 and 8 through holes (3/64", 5/64"
AND 8/64" diameter) and distance calibration marks to the 2.0" hole. In
accordance with International Institute of Welding, ASTM E164 and DC Block
U.S. Air Force NDI Manual T.O. 33B-1-1 specifications. AWS-type block used for shear wave distance calibration. Contains a
Product Features: 1.0" radius overlaying a 2.0" radius on a 180° segment. In accordance
• Dimensions: 12.0" x 4.0" x 1.0" with ASTM E164 and BRR/AWS X-1 specifications.
• Any alloy available upon request Product Features:
• Optional fitted wooden storage case • Dimensions: 2.000" and 1.000" Radii
• Any alloy available upon request
• Fitted wooden storage case optional
Hardness
Equotip 3 Metal Hardness Tester
The Equotip 3 is a versatile portable metal hardness tester offering extended capabilities and
unmatched ease of operations. This metal hardness tester has a large and clear display which
is integrated in the robust ABS plastic housing together with the sealed membrane keypad.
Product Features:
• The metal hardness tester Equotip 3 converts directly to all common hardness scales (HV,
HB, HRC, HRB, HRA, HS, Rm); creates and uses another up to 20 customer-specific conver-
sions for uncommon alloys
• Highly accurate +/- 4 HL (0.5% at 800 HL) with automatic correction for impact direction
• Internal storage of – 100,000 measured values in a flexible user-defined file/folder structure
• Down-/upload data from/to PC via USB, Ethernet or RS-232
Flat
Bottom Flex Vacuum Box Model 30FB
Vacuum Box The Flex Vacuum Box comes packaged in a sturdy wood box to pro-
These units are used primarily for testing the bottom of storage tanks. tect the unit during shipping and can be used to safely store your unit
All vacuum boxes come packaged in a sturdy wood box to protect for future use. Each box is shipped with the hardware to immediately
the unit during shipping and can be used to safely store your unit for begin testing when connected to an air source. All vacuum gauge
future use. Each box is shipped with the hardware to immediately dials read 0-30" Hg.
begin testing when connected to an air source. All vacuum gauge Product Features:
dials read 0-30" Hg. • Outside Dimensions: 30" L x 7 ½" W x 1 5/8" H
Available Flat Bottom Boxes Include: • Viewing Area: 26 7/8" L x 4 ½" W
• 10FB - Outside Dimensions: 10" L x 7 ½" W x 1 5/8" H
Viewing Area: 6 7/8" L x 4 ½" W
• 20FB - Outside Dimensions: 20" L x 7 ½" W x 1 5/8" H
Viewing Area: 16 7/8" L x 4 ½" W
• 30FB - Outside Dimensions: 30" L x 7 ½" W x 1 5/8" H
Viewing Area: 26 7 7/8" L x 4 ½" W Vacu-Lite
Vacuum Box Model V01
The Vacu-Lite vacuum box is used for
the non-destructive testing of geomembrane seams. The unit is com-
pletely self-contained; therefore, no outside vacuum source is need-
ed. The SHOP-VAC motor can easily be removed from the one-piece,
vacuum molded, Magard-coated, Lexan box and used as a dirt blower.
Vacu-Lite comes with a gauge built in and is certified upon request.
Technical Data:
• Power Requirement 110 or 220 Volt AC, 50-60 Hz
• Vacuum Source Shop-VAC motor attached directly to box
• Vacuum Rating Up to 4 in. mercury standard
(Higher vacuum rating available)
• Outside Dimensions 27 ½" L x 8 ½" W x 4" H
• Weight 34 lbs.
Corner Vacuum Box
These units are specifically designed for testing the inside corner,
where the bottom meets the sidewall (at 90 degrees) of storage tanks. Accessories
All vacuum boxes come packaged in a sturdy wood box to protect
the unit during shipping and can be used to safely store your unit for Leak-Tec Formula 372E
future use. Each box is shipped with the hardware to immediately Leak Detection Liquid
begin testing when connected to an air source. All vacuum gauge Thin film bubble testing is the most com-
dials read 0-30" Hg. mon and one of the most reliable methods
Available Flat Bottom Boxes Include: of detecting and locating leaks. Leak-Tec for-
• 8CB - Outside Dimensions: 8" L x 5 ¼" W x 5 ¼" H mula 372E is used for general purpose non-
Viewing Area: 5" L x 2 7/8" W destructive inspections. Temp: +35 to 160° F.
Corrosion Index: IV. Sensitivity: 1x10^-5cc/
• 18CB - Outside Dimensions: 18" L x 5 ¼" W x 5 ¼" H
sec. Available in 1, 5 and 55 gallon contain-
Viewing Area: 15" L x 2 7/8" W
ers.
• 30CB - Outside Dimensions: 30" L x 5 ¼" W x 5 ¼" H
Viewing Area: 27" L x 2 7/8" W Air Hose
• 40CB - Outside Dimensions: 40" L x 5 ¼" W x 5 ¼" H / " x 50' x ¼" NPT Heavy Duty Air Hose
38
'$"$ #"#$$$"!%$ &
3 "#'$""#$//8+;>:3-$#"##$###$'$
#'$$+#*$" "$$%#'$"#'$) #-
"$#$ (%#$# $%"%#$"$#"$(
#+' "&'# #$&"&"$%)$#-
Standard Magnetic
FlawTech Standard Kit Specimens are designed to enhance the train-
Particle/Liquid Penetrant
'#$## #()#&""$$#$
ing and qualification of Level I & II personnel with regards to ASNT-
#$"$$&$##&$#$-
TC-1A, EN473 & PCN. Kits are also designed to assist with basic flaw
Testing Kit
/ <"$#$ #
detection, sizing and interpretation using common weld geometries
o 18247-9<. Specimens are packaged in a car-
o 182
$47-9<.
and flaw types. From the most complex custom specimen to our
o 192
$#47-=9<.
rying case complete with docu-
famous Standard Kits and Practical Exam Specimens, FlawTech can
o 182
4;.%?717-::>.'2 ment package with “Flaw Truth”
/ 9'# $$+: 088$$
provide flawed specimens to cover virtually all NDT methods.
/ %$%#,+"'#+
3#$$# documented by CAD drawings with
/ "")#,=.(8=.(97.
a standard tolerance of +/- 0.150"
(4mm). The kit contains 8 plates
and 2 tees – 20 discontinuities, “real
flaws”, randomly placed.