Professional Documents
Culture Documents
ACI 350-06 Errata
ACI 350-06 Errata
ACI 350-06 Errata
ACI 350-06
Code Requirements for Environmental Engineering
Concrete Structures and Commentary
1st printing
Reported by ACI Committee 350
A 992/A 992M-02 03 …
A 497/A 497 M-02 99 Standard Specification for Steel Welded Wire Reinforcement Fabric,
Deformed, for Concrete Reinforcement
C 42/C 42M-03 Standard Test Method of Obtaining and Testing Drilled Cores and Sawed
Beams of Concrete
C 192/C 192M-02 Standard Practice for Method of Making and Curing Concrete Test
Specimens in the Laboratory
Samples for strength tests shall be taken in accordance with “Standard Practice for Method of
Sampling Freshly Mixed Concrete” (ASTM C 172).
Page 71, Section 5.5.2.2, revise to read:
Cylinders for strength tests shall be molded and laboratory-cured in accordance with “Standard
Practice for Making and Curing Concrete Test Specimens in the Field” (ASTM C 31) and tested
in accordance with “Standard Test Method for Compressive Strength of Cylindrical Concrete
Specimens” (ASTM C 39).
10.6.4.3 — In Eq. (10-4) and (10-5) it shall be permitted to use the value 25 for the term
2 2
4(2 + db) 4(2 + db/2) as a simplification.
For example, a bar size is provided at a simple support such that ld is computed by in accordance with
12.2. is equal to 0.04Abfy/ f c′ . The bar size provided is satisfactory only if computed ld
0.04Abfy/ f c′ does not exceed 1.3Mn/Vu + la.
18.1.4 — The environmental durability factor provisions of Section 9.2.6 of this code shall not
apply to prestressed concrete except for the provisions of 9.2.6.4 and 9.2.6.5 for shear design
loads.
(Kl x + μα)
Ps = Pxe Ps = Pxe(Klx + μα) (18-1)
R18.16.3 — A liquid-tight connection may be achieved either by using special connector pieces,
which provide a liquid-tight connection to the anchor at one end and the sheathing at the other
end, or by other means meeting the liquid-tightness test performance criteria and proven to
maintain liquid-tightness under field conditions. The 15 10 psi pressure corresponds to
approximately a 30 20 ft head of water. More restrictive requirements for liquid-tightness may be
specified for special applications where a high hydrostatic pressure is anticipated.
Page 323, Section 20.5.2, Eq. (20-3), revise to read:
Δ fmax Δ
Δ rmax ≤ Δ rmax ≤ fmax (20-3)
5 4
To determine the maximum beam shear…with this condition [(Mnl + Mnr)/ln] [(Mnl + Mnr)/ln]
added…
z = fs 3 d c A z = fs 3 d c A (C-9)
w = 0.076 β f s 3 d c A w = 0.076 β f s 3 d c A
The concrete breakout strengths given by Eq. (D-7) and (D-8) assume cracked concrete…
1.5Pu 1.5Pu
hd = 1000rd hd = rd (G-1)
φBi Bc E c φBi Bc E c