Professional Documents
Culture Documents
Appendix 1a Fj9097.33-160b Msdsnew2
Appendix 1a Fj9097.33-160b Msdsnew2
Page 01 of 05
1. Identification of the substance / preparation and the company
2. Composition/information on ingredients
Product description Compound Polyol Blend
Name CAS Proportion
Polyether polyol mixture 9082-00-2 > 95 % w/w
Other ingredients at levels Mixture <5% w/w
considered not to be
hazardous.
3. Hazards identification
Consideration of the composition of this product indicates that it does not present a
significant health hazard to users.
High exposures by inhalation may product anaesthetic effects.
4. First-aid measures
Inhalation: Remove patient from exposure, keep warm and at rest.
Obtain medical attention if ill effects occur.
Skin contact: Wash immediately with water followed by soap and water.
Eye contact: Irrigate with eyewash solution or clean water, holding the eyelids apart, for
at least 10 minutes.
Ingestion: Provided the patient is conscious, wash out mouth with water and gives
200-300 ml (half a pint) of water to drink. Do not induce vomiting.
Obtain medical attention if ill effects occur.
When opening, the temperature of the container should be below 30°C. care should be
taken to release any internal pressure slowly.
Take precautionary measures against static discharges.
7.2 Storage
Form: Liquid
Flash Point (°C) Not applicable.
Toxicity
No data.
The generation of waste should be avoided or minimised wherever possible. If this is not
possible, destruction is to be in an approved facility, which is equipped to absorb and
neutralize acid gases and other toxic, processing products. Waste, even small quantities,
should never be poured down drains, sewers or water courses.
AIR
ICAO/IATA Class
- primary : --
SEA
IMDG Class
- primary : --
ROAD/RAIL
ADR/RID Class : --
ADR/RID Item No. : --
ADR SIN : --
GLOSSARY
COM : The company aims to control exposure in its workplace to this limit.