The document discusses vibration severity levels for machinery based on ISO 10816-1 standards. It provides a table of criteria for overall machine condition ratings based on peak velocity levels in inches per second. The table applies to in-service machines that have been operational for some time, not new or rebuilt machinery. Two alarm levels are indicated in the table to monitor machine vibration severity.
The document discusses vibration severity levels for machinery based on ISO 10816-1 standards. It provides a table of criteria for overall machine condition ratings based on peak velocity levels in inches per second. The table applies to in-service machines that have been operational for some time, not new or rebuilt machinery. Two alarm levels are indicated in the table to monitor machine vibration severity.
The document discusses vibration severity levels for machinery based on ISO 10816-1 standards. It provides a table of criteria for overall machine condition ratings based on peak velocity levels in inches per second. The table applies to in-service machines that have been operational for some time, not new or rebuilt machinery. Two alarm levels are indicated in the table to monitor machine vibration severity.
Enveloped Acceleration Limits - SKF TECHNICAL ASSOCIATES OF CHARLOTTE, P. C. TABLE II: CRITERRIA FOR OVERRALL CONDITTION RATING ( PEAK OVERALL VELOCITY. IN/SEC)*
1.- ASSUMING MACHINE SPEED = 600 TO 60,000 RPM
2.- ASSUMING MEASUREMENTS BY ACCELEROMETER OR VELOCITY PICKUP
SECURELY MOUNTED AS CLOSE AS POSSILBLE TO BEARING HOUSING
3.- ASSUMING MACHINE IS NOT MOUNTED ON VIBRACTION ISOLATORS (FOR
ISOLATED MACHINERY, SET ALARM 30% - 50% HIGHER)
4.- SET MOTOR ALARMS SAME AS THAT FOR THE PARTICULAR MACHINE TYPE UNLESS OTHERWISE NOTED.
5.- SET ALARM ON INDIVIDUAL EXTERNAL GEARBOX POSITIONS 25% HIGHER
THAN THAT FOR A PARTICULAR MACHINE TYPE TABLE II: CRITERRIA FOR OVERRALL CONDITTION RATING ( PEAK OVERALL VELOCITY. IN/SEC)* TABLE II: CRITERRIA FOR OVERRALL CONDITTION RATING ( PEAK OVERALL VELOCITY. IN/SEC)* TECHNICAL ASSOCIATES OF CHARLOTTE, P. C.
TABLE II: CRITERRIA FOR OVERRALL CONDITTION RATING
( PEAK OVERALL VELOCITY. IN/SEC)*
*NOTE: The "ALARM 1" and "ALARM 2" overeall levels
given above apply only to in - service machinery which has been operating for some time after initial Installation and/or overhaul. They do not apply (and are not meant to serve as) Acceptance Criteria for either new or rebuilt machinery. Machinery Vibration Severity Guide - AZIMA Entek IRD vibration severity chart ISO 10816 - 3 ISO 10816 - 3 ISO Alert Severity chart