KATHMANDU UNIVERSITY
Department of Mechanical Enginect
End Semester Examination 2017 - EDRGIOL
ME (AM and D&M) Time: 2 howes 45 mins
PM: 10
ions carefully. Assume data, if missing, 2 marks fille bos
14,00,000 to read up
in 72 minutes.
20 minutes. Construct a plain seale of R
4) Acar covers 60km in L hour
the distance traveled by ea
toakilometer and capable of measuring 90 km show t
o
oR
Fixed points A and B. 90mm
1d B, its distance from each
[A particle moves such that the sum of is distanee from the vo f
Also draw tangent to the
Apart remains constant. When P is at equal distance from A any
fone of them is 75mm. draw the path traced out by the particle
curve from any point ouside the curve.
5 min in front of VP and end point B 50 mm above the
AAP. THe line is inclined at 45° to HP. while its front view 's inclined at 60 ° to the XY line.
Draw the projections of the straight line AB if ts top view is3S mm long Find the tue length,
distance of point A above HP and the angle of inclination ofthe line withthe VP. (6)
A straignt line AB has its end point A 1
oR
'A pentagonal prism is resting on one ofthe edges ofits base on the HP with its axis ine
AAAS" to the HP and the plan view ofthe axis i incline at 30° to VP. Draw the project
46). Draw the development ofthe lateral surface ofthe truncated right circular cylinder of giameter
pen and height 70 mm. The cylinder is placed on HP. A section of plane, passing through
face of the cylinder, perpendicular to VP and inclined at 45°to
the geometric center ofthe top fa
HP. cuts off the top portion ofthe eylinder. A similar setonal plane make an angle of 30° to
LP in the opposite direction, cuts the axis ata height of l4mm from the base
***Best of Luck***KATHMANDU UNIVERSITY
Department of Mechanical Engineering
End Semester Examination 2017 - EDRG1OL
Time: 2 hours 48 mins.
PM: 10
SET-A
uly. Assume data if missing. 2 marks for title box
1) A-cube of em side represents a tank of 1000 m' volume. Find the R.F. and construct a Vernier
seale to measure up to 35 m and mark a distance of 27.5 m and 30.5 on it. (8)
oR
‘A Line AO represents the semi-major avis of an ellipse and measures 60mm which major
axis is AB. A point P isat a distance of 90mm from A and SOmm from B. Draw the elliptical
‘curve passing through the points P. A and B. Find the eccentricity of the curve, Draw
tangent to the ellipse at any point vm the curve.
Aine MN 90 mm long is inclined at 45° to HP and 30° to VP. A point P divides AB in 45
2
parts and P is 60 mm above HP and SO mm in front of VP. Obtain the projection of lines. (6)
m*25mm and
Draw the top and front views of a rectangular pyramid of sides of base 20
height 3mm when it lies with one of its triangular faces containing the longer edge of
the base on VP. This longer edge containing the triangular face lying on VP is inclined at
609 to HP in the top view with the apes of the pyramid away from HP. (7)
OR
A right regular square prism of 30 mm base edge and 60 mm height rests on its base such
that its vertical faces are equally inclined to VP. It has a horizontal circular hole of 30 mm.
diameter drilled at middle point of its axis through it suck that the axis of the hole cuts both
the diagonally opposite vertical edges. Develop the lateral surface of the prism.
»
Best of Luck***KATHMANDU UNIVERSITY
Department of Mechanical Engineering
End Semester Examination 2017 - EDRGIOL
Time: 2 hours 45 mins
PM: 10
SET-B
ue
tad the questions carefully. Assume daa. if missing. 2 mu
41) A rectangular field of 0.0054 hectare is represented on a map by a rectangle of 3 em x 2
em. Calculate the R.F and draw a diagonal scales to read up toa single meter and that is
ong enough to measure upto 60 m, Mark 40 m and $ dm. (5)
2) The asymptotes of a rectangular hyperbola are inclined at 90° to each other. A point P
fon the curve is at a distance of 15mm and 10mm from the tso asymprotes. Draw two parts
Of the hyperbola passing through the point P. (6)
oR
A pentagonal lamina of side 35 mm is resting upon its edge on HIP, so that the surface is
inclined at 45° to HP. The line joining the midpoint of the resting edge to the opposite corner
is inclined at 30° to the VP such that the resting edge is away from VP. Draw the projections
of the lamina
‘An equilateral triangular pyramid 20mm side of base and SOmm long rests with one of its
shorter edges on HP such that triangular face containing the edge on which the pyramid
rests is inclined at 30° to HP, The edge on which the pyrarrid rests is inclined at 60° to the
VP. Draw its projections (3)
3
oR
A vertical hexagonal prism of 30mm side of base and axis 65mm long has one of its
rectangular faces parallel to VP and nearer to it, A circular hole of 25 mm diameter is drilled
through the prism at right angles and is perpendicular to VP. Draw the development of
prism showing the shape of the hole on it.
***Best of Luck***