Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Electricity is one important requirement for humans.

symptoms of electricity

caused by the flow of electrical charge between two points. All the equipment is electrically
charged that every day we use an arrangement of electrical components that make up

closed path is called a circuit. Basically an electrical circuit occurs when a conductor capable
of flowing free electrons continuously and continuous flow is called flow. On strong
electricity circuit to calculate the current flowing and the voltage applicable law

Kirchoff I and II. Practical necessity ohm law that in order to determine the relationship

voltage and current strength.

LITERATURE

Obstacle is the potential difference in comparison with the current in the conductor

The conductor. The higher the barrier, the smaller the electric current to a voltage

so the current is inversely proportional to obstacles. It can be seen that the barriers have

perampere volt SI units are defined as one ohm (W) (Grancoll, 2001).

Ohms law reads as follows: "the magnitude of the strong currents that arise on a

conductor is directly proportional to the potential difference or voltage between the two ends
or The Conductor ". Ohms law illustrates how the current, voltage and resistance

related. George ohm determining the experimentally that if the voltage is passed

an increase in value then the current detainees will also be increased from him, as well

otherwise. Ohms law can be written mathematically, as follows:

V = I .R (2.1)

Where :

V = power supply voltage (volts)

I = current strength (ampere)


R = the resistance (ohms)

Ohms law also states that at a constant voltage, if the resistance value

minimized, it will obtain the current is stronger, and vice versa, and can be written

as follows:

I = V / R (2.2)

(Rusdiato, 1999)

Free electrons move in an electric field use

the same period. During a movement, electro-free electrons are distributed by field.

This description should use methods of quantum mechanics. When there is no electric field

Externally, the electrons move in any direction and no transportation charge

net or electric current. But if it is used an external electric field, in the flow

Random movements of electrons, causing electrical current (Alonso, 1992).

You might also like