Professional Documents
Culture Documents
Tier 3: Engine G.V.W. Payload Capacity Struck Power
Tier 3: Engine G.V.W. Payload Capacity Struck Power
Rigid Dumper
ENGINE STEERING
Diesel cycle with 6 cylinders in line, direct electronic Complies with ISO 5010, SAE J1511
injection, pump injectors, turbo charger with intercooler, Hydraulic power steering with double action cylinder. Gear
variable geometry turbine. pump with flow regulator in tandem with tipping pump.
Emissions: EPA - CARB - OFF ROAD TIER 3 Max working pressure: 170 Bar (17 Mpa). Radial piston
Make and type: ........................ IVECO CURSOR 10-F3A emergency pump driven by the transmission. Adjustable
Bore x stroke: ............................ 125x140 mm (4.9"x5.5") steering column/wheel in height and inclination.
Total displacement: ......................................... 10300 cm3
Max power: .................... 280 KW ( 381 HP) @ 2100 rpm
Max torque: ................. 1800 Nm (183 Kgm) @ 1000 rpm
Integrated engine brake: ......................Iveco Turbo Brake
Cold start - 25° C
BRAKES
Independent circuits, in compliance with ISO 3450.
Disk brakes with two callipers for axle. Hydraulic control
with engine controlled gear pump and two pressure
PERFORMANCE accumulators.
With standard 18.00R25 tyres Parking brake: pneumatic disk brake on transmission
shaft, rear axle power take-off
gears gears ratio Km/h mph Electronic integrated Engine Brake and hydraulic
retarder engagement (4-position lever).
1 4,70 8,9 5.5
2 2,21 19,0 11.8
3 1,53 27,4 17.0
4 1,00 41,9 26.0
SUSPENSIONS
5 0,76 55,2 34.0 Front: independent steering wheels, hydro-pneumatic
6 0,67 62,6 38.8 suspension cylinders (oil-nitrogen) acting as
1 RM 5,55 7,6 4.7 suspension/shock absorber.
Rear: semi-independent with three reaction rods and
Panhard type cross bar. Two hydro-pneumatic cylinders
(oil/nitrogen) acting as suspension/shock absorber.
TRANSMISSION Optional: front suspension inflation kit .
Automatic transmission Allison HD4560 with integrated
retarder on gear output.
6 forward speeds and one reverse. ECO (energy saving)
or POWER (performance boosting) selectable modes.
ELECTRICAL SYSTEM
2 batteries: .................................................. 12 V / 170 Ah
Voltage: ..................................................................... 24 V
Alternator: .................................................................. 90 A
REAR AXLE Starter motor : ....................................................... 4.5 kW
All wires are coded, covered and fastened to the
KESSLER axle.
chassis. CAN bus Simple-Mux system between engine
Double reduction: central by crown wheel and pinion and
control unit, gearbox, body computer and input/output
final in wheel hubs by epicyclical gearing.
device. New Black Box able to manage 140 records for
Central reduction ratio: ................................ 1:2.,43
each memory area. New cluster with high definition
Final reduction ratio: ........................................ 1:6,00
multifunctional colour display.
Total reduction ratio: ................................ 1:14,58
On request: rear view camera with cluster integrated
display.
TYRES
Steel rim: …..............................……….....… 13.00-25/2.5
Tubeless radial tyres: ......................…………... 16,00R25
PNEUMATIC SYSTEM
On request: Tubeless rock tyres 18,00R25 Single cylinder compressor.
Air dryer.
Air tanks (l) ................................................................ 20+5.
Pneumatic circuit for parking brake, suspension seat, horn
and air take up in the cab.
Grease
GREASING SYSTEM
Optional: automatic central greasing system with a
variable amount of grease according to the conditions in
which the vehicle is used.
WEIGHTS Kg
TARE (*) PAYLOAD TOTAL WEIGHT
kg lb kg lb kg lb
Front axle 11.480 25.309 6.945 15.311 18.425 40.620
600
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Speed (km/h)
100
500
400 80
300 60
40
Rev
20
TOTAL RESISTANCE %
100
90 1 st
80
70 100
10
RIMPULL (kN)
60 80 9
50 60 2 nd 8
7
40
6
40
3 st 5
30
4
4 th
20
20 5 th 3
6 th
2
10 10
9 9
8 8
7 7 1
6 6
5 5
4 4
3 3
2 2
1 1 Speed (km/h)
0 10 5 10 15 20 25
20 30 35 30 40 45 40 50 55
50 6060 65
70 70
80
G.V.W. (kg x 1000)
0 10 20 25 30 40 45 50 55 60 70 80 90 100 110
600 80 Speed (km/h)
500
400 60
200
20
Iveco turbo brake più rallentatore
1 st
100 2 nd
90
RESISTENZA TOTALE %
FORZA FRENANTE (kN)
80 10
9
70 100 3 st 8
60 80 7
50 60 4 th 5 th
40 6
40 6 th
30 5
4
20 20 3
2
10 10
9 9
8 8
7 7 1
6 6
5 5
4 4
3 3
2 2
1 1
0 10 20 25 30 40 45 50 55 60 70 80 90 100 110
Speed (km/h)
10 20 30 40 50
ROLLING RESISTANCE
G.V.W. (kg x 1000)
Road surface for gross in %
features weight t
Black top - Concrete 15kg 1,5% To determine retarding performance, read the G.V.W. down to the percent effective grade.
Hard packed soil 20kg 2,0% From this point, read horizontally to the curve with the highest obtainable gear, then down
Mud on packed soil 40kg 4,0%
Packed snow 25kg 2,5%
to the maximum descent speed brakes can properly handle without exceeding cooling
Soft snow 45kg 4,5% capacity.
Sand - Gravel 100kg 10,0%
Dimensions in mm
Vehicle with tyres 16,00R25
Height with unloaded vehicle
56°
7681
25’2”
3298
10’10”
2610
8’7”
31,5° 1171
785 3’10”
2’7”
542
1900 / 6’3” 3650 /11’12” 1’9”
1803 / 5’11”
3440 R8925
3700
11’3” 12’1”
12’2”
R3683 / 12’1”
6923 / 22’9”
7355 / 24’2”
3640 / 11’11”
3806
12’6”
660 2’2”
Characteristics and equipment are subject to changes without prior notice M.K.T.- 11.09- A3502001