Professional Documents
Culture Documents
GST
GST
Features
Driving 220VAC devices.
Providing normally open, normally closed output
contacts.
Plug-in structure.
Description
C-9302 Interposing Relay Module is used with I-9301
Addressable Single I/O Module for signal exchange
with equipment 220VAC or high-voltage DC powered. If the cable conduit is inside the wall, the base is
installed onto the Back Box (Fig. 2). If the conduit is on
It’s a non-addressable module, input signal is 24VDC;
the surface of the wall, a B-9310 Back Box is available
output signal is 220VAC which is transformed to drive (Fig. 3).
the relay. B-9310
Back Box
Conduit Back Box Conduit
Connection and Cabling Module Module
Mounting Mounting
COM NO NC
Hole Hole
Mounting
8 7 2 1
Direction
Fig. 2 Fig. 3
6mm
9 10 15 16
Note the upward arrow for mounting direction (Fig. 1).
O G
Application
Method of controlling AC devices is shown in Fig. 4.
Fig. 1 +24V
Z1
COM, NO, NC: normally open, normally closed control
Z2
contact output terminals.
D1 D2 Z1 Z2
O, G: Voltage 24VDC control signal input signal. I1
G I-9301
Recommended Cabling G V+ NC1 COM1 NO1
2
2.5mm or above fire cable for all terminals, and subject
G O
to local codes. C-9302
NC COM NO
Installation ~220V
The module is simply plugged onto the base after Action Contactor
Contact
corresponding terminals are connected.
Fig. 4
This Data Sheet is subject to change without notice. Please contact GST for more information or questions.