Professional Documents
Culture Documents
RBS 2116 2116 v2 PDF
RBS 2116 2116 v2 PDF
This section lists the spare parts for the earlier variant of RBS 2116.
1.6 Cables
The sections below describe cables for the early variant RBS.
4.7 Dummies
Figure 11 Dummies
Table 11 Dummies
5 RBS 2116 V2
This section lists the spare parts for RBS 2116 V2.
The figure and tables below show the alarm and control units.
The figure and tables below show the alarm and control connections.
5.1.2 Y Link
The figure and the table below shows the cable connections between IFB and each
Digital Signal Processor (DSP) system in a core-based Transceiver Unit (TRU); (Y link).
Figure 15 Y Link Connections
The figure and the table below show the Environmental and Power Control (EPC)
connections.
Figure 16 EPC Bus Connections (V2)
AC Power
Note:
BBS power (optional)
DC Power
Note:
BBS power (not supported)
For information about voltage levels and recommended fuse ratings, see the document
RBS Product Description, specific for the RBS.
The figure and table below show a RBS 2116 V2 cabinet equipped with ACCU PSU-ACs.
The figure below also shows parts for input power from an optional Battery Backup
System (BBS).
Note:
RBS 2116 V2 supports DC-filter option for BBS input power
Figure 18 AC RBS Input Power Connections (V2)
The figure and table below show an earlier variant of RBS cabinet equipped
with an DC Connection Unit (DCCU) and DC powered PCUs that convert DC
to DC (PSU-DCs).
Figure 19 DC RBS Input Power Connections (V2)
2.8 Dummies
Similar to table in Section 4.7, the following table lists dummies for V2.
Table 32 Dummies
This is the only place in this catalog where Product Numbers shown in
previous catalogs are found.