Professional Documents
Culture Documents
TB032315 2
TB032315 2
The AERA Technical Committee offers the following information regarding piston ring
end-gap specifications for Cummins B Series engines. This information should be
considered any time piston rings are being replaced.
This document provides cross referencing charts for all 102.000 MM (4.016”) B series
compression ring gaps for specific ring part numbers. Different compression rings are
used on OE equipment to address certain engine work requirements, fuel systems and
specific horsepower ratings.
The cross referencing tables are ordered by ring size (Standard, 0.5 mm (.020”)
oversize, and 1.0 mm (.040”) oversize) and by part number in descending order. First
identify the correct bore / piston ring size, and then find the part number of the rings in
the appropriate table.
NOTE: If you cannot find the correct piston ring part number listed in the tables above, call
AERA with the engine serial number and they will help you determine the correct gap
specifications.
This information is provided from the best available sources. However, AERA does not
assume any responsibility for data accuracy or consequences of its application.
Members and others are not authorized to reproduce or distribute this material in any
form, or issue it to their branches, divisions or subsidiaries, etc. at a different location
without written permission.