Professional Documents
Culture Documents
Scour Sensor - Corrosion Protection - Design Life
Scour Sensor - Corrosion Protection - Design Life
Scour Sensor - Corrosion Protection - Design Life
THE STRUCTURE FOR INSTALLING SCOUR SENSOR
8 CORROSION PROTECTION FOR STEEL STRUCTURE
The durability about the steel structure is 20 years, refer to the condition in ISO 12944‐5 A5.5 :
Please note that the durability is diffirent with the guaranteed time (according ISO 12944).
From the environment condition and the durability, the choosen of corrosion protection as
below :
The Surface preparation shall be done as per ISO 8501 with cleaning method Sa 2 ½ (Very
throrough blast cleaning) with base on the rust grade relevant.
Conclusion, the steel structure for installing scour sensor will be protect with 4 coats and total
thickness is 500um :
‐ Coal tar epoxy priming coat : 1 coat thickness 120 um.
‐ Coal tar epoxy top coat : 3 coats with total thickness 380 um (127 um each coat)
Réf. : ‐A 18/18