Professional Documents
Culture Documents
Cast Iron Valve PDF
Cast Iron Valve PDF
Product Coding
DN 10 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
Size
NPS 3/8 1/2 3/4 1 1 1/4 1 1/2 2 21/2 3 4 5 6 8 10 12 14 16 18 20 24
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ●
● ● ● ● ●
● ● ●
● ● ● ● ● ●
● ● ●
This catalog uses MPa, a SI unit, for indication of pressures. For readers' convenience, however, psi is also used for
ASME related products respectively.
The products introduced in this catalog are all covered by the ISO 9001 Certification awarded KITZ Corporation in 1989,
the earliest in the valve industry.
1
KITZ CAST IRON VALVES
Wall thickness JIS B 2031 KITZ Std. 120º(248º) non-shock water 0.69 1.37 0.98 0.98
Tensile strength (N/mm2) min. 200 250 300 Simplified Material Indication (as referred to in each page)
Brinell hardness (HB) max. 235 248 269 Bronze trim : Iron body with bronze trim
13 Cr. trim : Iron body with 13 Cr. trim
ASTM A126 Class B Tensile strength (min) 31ksi
18-8 trim : Iron body with 18 Cr.-8 Ni trim
Face at center, min. 3,300 lb
Transverse test requirement
Deflection at center, min. 0.12in
Certification by JIS Mark
Industrial Standardization Law of Japan provides an effective
ASME Valves Pressure-Temperature Ratings
measure to promote introduction of high level quality assur-
Maximum Allowable Non-Shock Pressure ance system of manufacture and processing. Wherever KITZ
Class 125 valves are identified with JIS Mark, it is officially certified
temperature that such valves are produced under strict quality assurance
Slze 1 – 12 Size 14 – 24 procedures and practices to satisfy the designated quality lev-
el stably and constantly.
-29 ºC
to 65 ber
200 9.6 -
220 9.0 -
232 8.6 -
※178℃ to refrect the temperature of saturated steam at 8.6 bar. Trim Materials
KITZ cast iron valves are provided with either one of the
three trim materials tabled below for versatility of service
applications.
Color coding is made on a spoke of the handwheel of gate or
globe valves and on the cover of swing check valves.
2
KITZ CAST IRON VALVES
Stem top protrudes while handwheel stays at the same position. The wedge moves upwards while stem and handwheel stay at the same position.
3
KITZ CAST IRON VALVES
JIS 5K IRON GATE VALVE Bolted bonnet, outside screw & yoke, rising stem.
Materials
Designed to JIS B2031
Parts Material JIS Spec.
Body Cast Iron FC200
Fig. 5FCM Bonnet Cast Iron FC200
• Bronze trim Stem Forged Brass C3771BD
Disc Cast Iron FC200
SIZE 10 ONLY
Disc seat ring Bronze CAC406
D Body seat ring Bronze CAC406
Gland Ductile Iron FCD-S
Gland packing Asbestos-free
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbon Steel
H Yoke sleeve Bronze
(OPEN) CAC406
Hand wheel Cast Iron FC250
Dimensions mm
B 2 21/2 3 4 5 6 8 10
Valve Size
A 50 65 80 100 125 150 200 250
L Face-to-face 160 170 180 200 220 240 260 300
H Height (OPEN) 328 382 436 532 627 726 919 1134
D Handwheel Diameter 160 170 170 225 225 250 280 350
JIS 10K IRON GATE VALVE Bolted bonnet, outside screw & yoke, rising stem.
Materials
Designed to JIS B2031
JIS Spec.
Parts Material
10FCL 10FCLS 10FCLU
Fig. 10FCL Fig. 10FCLS Fig. 10FCLU Body Cast Iron FC200
• Bronze trim • Stainless steel trim • Stainless steel trim Bonnet Cast Iron FC200
(13 Cr.) (18-8)
Stem Brass/Stainless Steel C3771BD SUS403 SUS304
D Disc Cast Iron FC200
Disc seat ring Brass/Stainless Steel CAC406 SUS403 SUS304
Body seat ring Bronze CAC406 SUS403 SUS304
11/2 to 14 Ductile Iron FCD-S
Gland
16 to 24 Stainless Steel SUS403
Gland packing Asbestos-free
SIZE 10 & LARGER
Gasket Asbestos-free
H
Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbpn Steel
Yoke sleeve Bronze CAC406
11/2 to 8 Cast Iron FC250
Hand wheel
10 to 24 Ductile Iron FCD400
Dimensions mm
B 11/2* 2 21/2 3 4 5 6 8 10 12 14* 16* 18* 20* 24*
Valve Size
A 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
L Face-to-face 165 180 190 200 230 250 270 290 330 350 381 406 432 457 508
H Height (OPEN) 306 343 389 462 547 648 759 956 1168 1363 1560 1795 1995 2230 2640
D Handwheel Diameter 160 170 170 200 250 280 300 350 400 450 500 600 600 680 760
*JIS Mark is not applicable
4
KITZ CAST IRON VALVES
JIS 10K IRON GATE VALVE Bolted bonnet, inside screw with indicator, non-rising stem.
Materials
Designed to JIS B2031
Parts Material JIS Spec.
Body Cast Iron FC200
Fig. 10FCWI Bonnet Cast Iron FC200
• Bronze trim Stem Forged Brass C3771BD
SIZE 8 & LARGER
Disc Cast Iron FC200
Disc seat ring Bronze CAC406
D Body seat ring Bronze CAC406
Gland Ductile Iron FCD-S
Gland packing Asbestos-free
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbpn Steel
Bonnet bushing Bronze CAC406
H
11/2 to 8 Cast Iron FC250
Hand wheel
10 to 12 Ductile Iron FCD400
Dimensions mm
B 11/2 2 21/2 3 4 5 6 8 10 12
Valve Size
A 40* 50 65 80 100 125 150 200 250 300
L Face-to-face 165 180 190 200 230 250 270 290 330 350
H Height 285 313 344 401 444 517 577 693 814 925
D Handwheel Diameter 160 180 180 200 250 280 300 350 400 450
*No JIS Mark
10K IRON GATE VALVE Bolted bonnet, inside screw with indicator, non-rising stem.
Materials
Fig. 10FCHI Parts Material JIS Spec.
Body Cast Iron FC300
• Bronze trim
Bonnet Cast Iron FC300
SIZE 8 & LARGER Stem Forged Brass C3771BE
11/2 Bronze CAC406
Disc
D 2 to 12 Cast Iron FC300
Disc seat ring Bronze CAC406
Body seat ring Bronze CAC406
Gland Ductile Iron FCD-S
Gland packing Asbestos-free
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbpn Steel
H
Bonnet bushing Bronze CAC406
Hand wheel Cast Iron FC250
120℃ Non-shock water 1.0 MPa, 120 ℃ Water, oil, air 0.9 MPa
Saturated steam 0.7 MPa
Dimensions mm
B 11/2 2 21/2 3 4 5 6 8 10 12
Valve Size
A 40 50 65 80 100 125 150 200 250 300
L Face-to-face 140 146 159 165 171 190 210 241 273 305
H Height 210 250 285 350 400 460 515 635 760 870
D Handwheel Diameter 140 140 160 160 180 225 225 300 350 350
5
KITZ CAST IRON VALVES
Class 125 IRON GATE VALVE Bolted bonnet, outside screw & yoke, rising stem.
Materials
Fig. 125FCL Fig. 125FCLS Parts Material ASTM Spec.
125FCL 125FCLS
• Bronze trim • Stainless steel trim
(13 Cr.) Body Cast Iron A126 CL. B
Bonnet Cast Iron A126 CL. B
Stem Brass/Stainless Steel B124 C37700 A276 Type403
D Disc Cast Iron A126 CL. B
Disc seat ring Bronze/Stainless Steel B62 A182 Gr.F6a
Body seat ring Bronze B62 A182 Gr.F6a
Gland Ductile Iron
SIZE 10 TO 12
Gland packing Asbestos-free
Gasket Asbestos-free
H Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbon Steel
Yoke sleeve Bronze B62
2 to 10 Cast Iron A126 CL. B
Hand wheel
12 & 14 Ductile Iron
Dimensions mm
NPS 2 21/2 3 4 5 6 8 10 12 14
Valve Size
DN 50 65 80 100 125 150 200 250 300 350
L Face-to-face 178 190 203 229 254 267 292 330 356 381
H Height (OPEN) 328 382 436 532 627 726 919 1134 1363 1560
D Handwheel Diameter 160 170 170 225 225 250 280 350 450 500
Class 125 IRON GATE VALVE Bolted bonnet, inside screw with indicator, non-rising stem.
Materials
Fig. 125FCWI Parts Material ASTM Spec.
Body Cast Iron A126 CL. B
• Bronze trim
Bonnet Cast Iron A126 CL. C
Stem Forged Brass B124 C37700
Disc Cast Iron A126 CL. C
Disc seat ring Bronze B62
D
Gland Ductile Iron
Gland packing Asbestos-free
SIZE 8 & LARGER
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbon Steel
Body seat ring Bronze B62
Bonnet bushing Bronze B62
H
Hand wheel Cast Iron A126 CL. B
Dimensions
NPS 2 21/2 3 4 5 6 8 10 12
Valve Size
DN 50 65 80 100 125 150 200 250 300
L Face-to-face 178 190 203 229 254 267 292 330 356
H Height 250 285 350 400 465 515 630 760 870
D Handwheel Diameter 140 160 160 180 225 225 300 350 350
6
KITZ CAST IRON VALVES
Class 125 IRON GATE VALVE Bolted bonnet, inside screw & yoke, non-rising stem.
Materials
Parts Material ASTM Spec.
Body Cast Iron A126 CL. C
Fig. 125FCHI Bonnet Cast Iron A126 CL. C
• Bronze trim Stem Forged Brass B124 C37700
SIZE 8 ONLY
Disc 11/2 Bronze B62
2 & larger Cast Iron A126 CL. C
D
Disc seat ring Bronze B62
Body seat ring Bronze B62
Gland Ductile Iron
Gland packing Asbestos-free
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
H
Bonnet bolt/nut Carbon Steel
Bonnet bushing Bronze B62
Hand wheel Cast Iron A126 CL. B
Design Specifications
Items
Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions KITZ Standard
End flange dimensions Gasket contact facing ASME B16.1 Class 125
L
For ASME Valves Pressure-Temperature Ratings, refer to page 2.
Dimensions mm
NPS 11/2 2 21/2 3 4 5 6 8
Valve Size
DN 40 50 65 80 100 125 150 200
L Face-to-face 140 146 159 165 171 190 210 241
H Height 210 250 285 350 400 465 575 630
D Handwheel Diameter 140 140 160 160 180 225 225 300
In case of KITZ cast iron gate valves, seat rings are mounted on the valve disc either by means of threading or
press-fitting. For example,10K outside screw gate valves are provided with threaded seat rings which are ideal
for saturated steam service. Or, 10K inside screw gate valves are provided with mechanically press-fit seat rings
by means of patented special process to suit them also for saturated steam service. All KITZ cast iron globe and
check valves are provided with threaded seat rings.
7
KITZ CAST IRON VALVES
JIS 10K IRON GLOBE VALVE Bolted bonnet, outside screw & yoke, rising stem.
Materials
Designed to JIS B2031
JIS Spec.
Parts Material
10FCJ 10FCJS 10FCJU
Fig. 10FCJ Fig. 10FCJS Fig. 10FCJU Body Cast Iron FC200
• Bronze trim • Stainless steel trim • Stainless steel trim Bonnet Cast Iron FC200
(13 Cr.) (18-8)
Stem Brass/Stainless Steel C3771BD SUS403 SUS304
Disc 11/4 & 2 Bronze/Stainless Steel CAC406 SUS403 SUS304
D 21/2 & lager Cast Iron FC200
Disc seat ring Bronze/Stainless Steel CAC406 SUS403 SUS304
Body seat ring Bronze CAC406 SUS403 SUS304
Gland 11/2 to 14 Ductile Iron FCD-S
SIZE 2 & LARGER Gland packing Asbestos-free
Gasket Asbestos-free
H
(OPEN) Gland bolt/nut Carbon Steel
Bonnet bolt/nut Carbon Steel
Yoke bushing Bronze CAC406
Hand wheel 11/2 to 6 Cast Iron FC250
8 only Ductile Iron FCD400
10 only Cast Iron FC200
Dimensions mm
B 11/2 2 21/2 3 4 5 6 8
Valve Size
A 40 50 65 80 100 125 150 200
L Face-to-face 190 200 220 240 290 360 410 500
H Height (OPEN) 260 277 307 353 404 454 533 642
D Handwheel Diameter 160 180 180 225 280 300 350 450
CLASS 125 IRON GLOBE VALVE Bolted bonnet, outside screw & yoke, rising stem.
Materials
Fig. 125FCJ Fig. 125FCJS ASTM Spec.
Parts Material
125FCJ 125FCJS
• Bronze trim • Stainless steel trim
(13 Cr.) Body Cast Iron A126 CL. B
Bonnet Cast Iron A126 CL. B
Stem Brass/Stainless Steel B124 C37700 A276 type403
Disc 2 only Bronze/Stainless Steel B62 A276 type403
SIZE 2 ONLY
21/2 & lager Cast Iron A126 CL. B
Disc seat ring Bronze/Stainless Steel B62 A276 type403
D
Body seat ring Bronze B62 A276 type403
Gland Ductile Iron
Gland packing Asbestos-free
Gasket Asbestos-free
Gland bolt/nut Carbon Steel
H Bonnet bolt/nut Carbon Steel
(OPEN)
Yoke bushing Bronze B62
Hand wheel 2 to 6 Cast Iron
8 only Ductile Iron
Dimensions mm
NPS 2 21/2 3 4 5 6 8
Valve Size
DN 50 65 80 100 125 150 200
L Face-to-face 203 216 241 292 330 356 495
H Height (OPEN) 277 307 353 404 454 533 642
D Handwheel Diameter 180 180 225 280 300 350 450
8
KITZ CAST IRON VALVES
JIS 10K IRON SWING CHECK VALVE Bolted cover, swing type disc.
Materials
Designed to JIS B2031
JIS Spec.
Parts Material
10FCO 10FCOS 10FCOS
Fig. 10FCO Fig. 10FCOS Fig. 10FCOU Body Cast Iron FC200
• Bronze trim • Stainless steel trim • Stainless steel trim Cover Cast Iron FC200
(13 Cr.) (18-8)
Hinge pin Brass/Stainless Steel C3771BD SUS403 SUS304
Disc 11/4 & 4 Bronze/Stainless Steel CAC406 SUS403 SUS304
5 & lager Cast Iron FC200
Disc seat ring Bronze/Stainless Steel CAC406 SUS403 SUS304
Body seat ring Bronze CAC406 SUS403 SUS304
Arm Stainless Steel SCS13A
SIZE 4 & LARGER SIZE 10 ONLY Gasket Asbestos-free
Cover bolt/nut Carbon Steel
H
Dimensions mm
B 11/2* 2 21/2 3 4 5 6 8 10* 12* 14*
Valve Size
A 40 50 65 80 100 125 150 200 250 300 350
L Face-to-face 190 200 220 240 290 360 410 500 620 700 787
H Height 106 111 121 145 165 207 225 268 315 356 381
Only 12" & 14" for 10FCOS & 10FCOU. *No JIS Mark
CLASS 125 IRON SWING CHECK VALVE Bolted cover, swing type disc.
Materials
Fig. 125FCO Fig. 125FCOS ASTM Spec.
Parts Material
125FCO 125FCOS
• Bronze trim • Stainless steel trim
(13 Cr.) Body Cast Iron A126 CL. B
Cover Cast Iron A126 CL. B
Hinge pin Brass/Stainless Steel B124 C37700 A276 Type403
Disc 2 to 4 Bronze/Stainless Steel B62 A182 Gr.F6a
5 & lager Cast Iron A126 CL. B
SIZE 4 & LARGER Disc seat ring Bronze/Stainless Steel B62 A182 Gr.F6a
Body seat ring Bronze/Stainless Steel B62 A182 Gr.F6a
Arm Stainless Steel A351 Gr.CF8
SIZE 10 ONLY Gasket Asbestos-free
Cover bolt/nut Carbon Steel
H
Dimensions mm
NPS 2 21/2 3 4 5 6 8 10
Valve Size
DN 50 65 80 100 125 150 200 250
L Face-to-face 203 216 241 292 330 356 495 622
H Height (OPEN) 111 121 145 165 207 225 268 315
9
KITZ CAST IRON VALVES
10K IRON Y-PATTERN STRAINER Bolted cover, Y-pattern body, Punched stainless
steel plate screen.
L
Materials
RIB SIZE 21/2 & LARGER
Fig. 10FCY LIFTING HOLE
Parts Material JIS Spec.
SIZE 8 & LARGER Body Cast Iron FC200
Cap 3/8 to 11/2 Brass C3771BE
Cover 2 & lager Cast Iron FC200
Screen Stainless Steel SUS304
Gasket Asbestos-free
H Cover bolt/nut Carbon Steel
H1
Plug 11/2 to 6 Stainless Steel SUS304
Screen dimensions
Valve Size A P
3/8 to 2 1.4ø 2.4mm
2 1/2 to 5 1.5ø 2.5mm
6&8 3.0ø 5.0mm
10 & 14 5.0ø 7.0mm
120℃ Non-shock water 1.4 MPa, 120 ℃ Water, oil, air 1.0 MPa
120℃ Gas 0.2 MPa, Saturated steam 0.7 MPa
SIZE 8 & LARGER FOR SIZE 11/2 ONLY
Strainer dimensions mm
B 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 6 8 10 12 14
Valve Size
A 10 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350
L Face-to-face 115 125 140 150 170 190 230 305 360 415 465 515 580 680 800 950
H Height 46 57 63 77 90 100 127 208 237 280 325 370 457 536 625 741
H1 64 82 91 114 134 146 173 289 335 388 446 497 643 768 893 1047
10
KITZ CAST IRON VALVES
CLASS 125 IRON Y- PATTERN STRAINER Bolted cover, Y-pattern body, Punched stainless
steel plate screen.
Materials
Fig. 125FCY L
Parts Material ASTM Spec.
Body Cast Iron A126 CL.B
• Bronze trim RIB SIZE 21/2 & LARGER
Cover Cast Iron A126 CL.B
LIFTING HOLE
SIZE 8 & LARGER Screen Stainless Steel A167 Type304
Gasket Asbestos-free
Cover bolt/nut Carbon Steel A307 Gr.B
Plug 11/2 to 6 Stainless Steel A276 Type304
H
Screen dimensions
Valve Size A P
H1
2 only 1.4ø 2.4mm
2 1/2 to 5 1.5ø 2.5mm
6&8 3.0ø 5.0mm
10 & 12 5.0ø 7.0mm
Design Specifications
Items
Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions KITZ Standard
End flange dimensions Gasket contact facing ASME B16.1 Class125
SIZE 8 & LARGER HOLE SIZE OF SCREEN For ASME Valves Pressure-Temperature Ratings, refer to page 2.
Dimensions mm
NPS 2 21/2 3 4 5 6 8 10 12 14
Valve Size
DN 50 65 80 100 125 150 200 250 300 350
L Face-to-face 250 285 315 370 420 490 570 680 800 950
H Height 168 212 242 284 325 370 440 515 600 740
H1 208 289 335 388 446 497 589 694 818 993
11
KITZ CAST IRON VALVES
Materials
Fig. 10FCT Parts Material JIS Spec.
Body Cast Iron FC200
Body cap Cast Iron FC200
Stem Stainless Steel SUS403
UP TO SIZE 1.1/4 Ball Stainless Steel SCS13A or SUS304
or SUS304TP
Grand packing PTFE
D Gasket PTFE
Ball Seat PTFE
Cap bolt Carbon Steel
Handle Ductile Iron FCD400
H
Design Specifications
Items
Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions KITZ Standard
Threaded ends JIS B0203
Dimensions mm
B 3/8 1/2 1/2 1 11/4 11/2 2 21/2 3
Valve Size
A 10 15 20 25 32 40 50 65 80
L Face-to-face 72 80 85 95 120 120 140 160 182
H Height 71 102 105 125 130 115 120 155 165
D Handle 130 130 130 160 160 230 230 400 400
Materials
Fig. 10FCTB Parts Material JIS Spec.
Body Cast Iron FC200
H
H
Body cap Cast Iron FC200
Stem Stainless Steel SUS403
SIZE 6 & LARGER SIZE 10 ONLY
D H
Ball Stainless Steel SCS13A or SUS304
or SUS304TP
Grand packing PTFE
Gasket PTFE
H
Ball Seat PTFE
Cap bolt Carbon Steel
Handle Ductile Iron FCD400
Design Specifications
Items
L UP TO SIZE 11/4 Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions KITZ Standard
End flange dimensions Gasket contact facing JIS B2239 10K
Dimensions mm
B 1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 6 8 10
Valve Size
A 15 20 25 32 40 50 65 80 100 125 150 200 250*
L Face-to-face 110 120 130 140 165 180 190 200 230 300 340 450 533
H Height 102 105 124 128 114 121 154 163 199 219 292 352 477
D Handle 130 130 160 160 230 230 400 400 460 460 1000 1500 -
*Note: Gear Operated. Contact KITZ or KITZ distributors for details.
12
KITZ CAST IRON VALVES
Materials
Fig. 10FCTR Parts Material JIS Spec.
Body Cast Iron FC200
D Body cap Cast Iron FC200
Stem Stainless Steel SUS403
Ball Stainless Steel SCS13A or SUS304
or SUS304TP
H
Grand packing PTFE
Gasket PTFE
Ball Seat PTFE
Cap bolt Carbon Steel
Handle Ductile Iron FCD400
Design Specifications
L
Items
H
Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions* JIS B2002
SIZE 8 & 10 End flange dimensions Gasket contact facing JIS B2239 10K
*Nominal size 5, shall not be in accordance with JIS B2002
Blowout-proof stem SIZE 6 ONLY SIZE 10 ONLY For Pressure-Temperature Ratings, refer to individual catalog.
Dimensions mm
B 5 6 8 10
Valve Size
A 125 150 200 250
L Face-to-face 250 270 290 330
H Height 200 220 295 355
D Handle 460 460 1000 1500
*No JIS Mark
Note:
H Flow is between Ports "A" and "C" in Form 1. Flow is
between Ports "B" and "C" in Form 2. Flow paths in
Form 1 and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is
higher than P1 in the open path, a little fluid
leakage may occur to P1 through the ball seat of the
closed path.
L
Design Specifications
Blowout-proof stem
Items
Shell wall thickness JIS B2031
Face-to-face dimensions End-to-end dimensions KITZ Standard
End flange dimensions Gasket contact facing JIS B2239 10K
Dimensions mm
B 11/2 2 21/2 3 4 5 6 8
Valve Size
A 40 50 65 80 100 125 150 200
L Face-to-face 210 220 250 260 330 370 430 540
L1 105 110 125 130 165 185 215 270
H Height 115 120 155 165 200 205 225 295
D Handle 230 230 400 400 460 460 460 1000
13
KITZ CAST IRON VALVES
Materials
Fig. 125FCTB Parts Material ASTM Spec.
Body Cast Iron A126 CL. B
Body cap Cast Iron A126 CL. B
Stem Stainless Steel A276 Type403
SIZE 6 & 8
Ball Stainless Steel A276 Type 304
D
or A312 Gr.TP304
orA351 Gr.CF8
Grand packing PTFE
H Gasket PTFE
Ball Seat PTFE
Cap bolt Carbon Steel
Handle Ductile Iron
Design Specifications
Items
L Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions ASME B16.10 Class150
End flange dimensions Gasket contact facing ASME B16.1 Class125
Dimensions mm
NPS 2 21/2 3 4 6 8
Valve Size
DN 50 65 80 100 150 200
L Face-to-face 178 190 203 229 394 457
H Height 120 155 165 200 295 355
D Handle 230 400 400 460 1000 1500
Materials
Fig. 125FCTR Parts Material ASTM Spec.
Body Cast Iron A126 CL. B
D Body cap Cast Iron A126 CL. B
Stem Stainless Steel A276 Type403
Ball Stainless Steel A312 Gr.TP304
H
or A351 Gr.CF8
Grand packing PTFE
Gasket PTFE
Ball Seat PTFE
Cap bolt Carbon Steel
Handle Ductile Iron
Design Specifications
L
H
Items
Shell wall thickness and general valve design KITZ Standard
Face-to-face dimensions End-to-end dimensions ASME B16.10 Class150
SIZE 8 & 10 End flange dimensions Gasket contact facing ASME B16.1 Class125
Dimensions mm
NPS 6 8 10
Valve Size
DN 150 200 250
L Face-to-face 267 292 330
H Height 220 295 355
D Handle 460 1000 1500
14
KITZ CAST IRON VALVES
C
D
NPS DN in. mm. in. mm. in. mm. in. mm. Number Diam. of bolt
15
KITZ CAST IRON VALVES
h h
t t
C g f
D C
D
JIS 5K Cast iron pipe flange dimensions JIS B2239 - 2004 Unit: mm
JIS 10K Cast iron pipe flange dimensions JIS B2239 - 2004 Unit: mm
3/8 10 90 65 46 14 15 1 4 M12
1/2 15 95 70 51 16 15 1 4 M12
3/4 20 100 75 56 18 15 1 4 M12
1 25 125 90 67 18 19 1 4 M16
1 1/4 32 135 100 76 20 19 2 4 M16
1 1/2 40 140 105 81 20 19 2 4 M16
Pressure (abs.) Pressure (G) Pressure (abs.) Pressure (G) Satulation Pressure (G) Pressure (abs.) Satulation
Temperature ºC
MPa MPa MPa MPa Temperature ºC MPa MPa Temperature ºC
17
E-120 =14
Pressure-temperature ratings and other performance date published in this catalog have
been developed from our design calculation, in-house testing, field reports provided by our
customers and / or published official standards or specifications. They are good only to cover
typical applications as a general guideline to users of KITZ products introduced in this catalog.
For any specific application, users are kindly requested to contact KITZ Corporation for
technical advice, or to carry out their own study and evaluation for proving suitability of
these products to such an application. Failure to follow this request could result in property
damage and / or personal injury, for which we shall not be liable.
While this catalog has been compiled with the utmost care, we assume no responsibility for
errors, impropriety or inadequacy. Any information provided in this catalog is subject to
from-time-to-time change without notice for error rectification, product discontinuation,
design modification, new product introduction or any other cause that KITZ Corporation
considers necessary. This edition cancels all previous issues.
If any products designated as strategic material in the Foreign Exchange and Foreign Trade
Law, Cabinet Ordrer Concerning Control of Export Trade, Cabinet order Concerning Control
of Foreign Exchange and other related laws and ordinances ( Foreign Exchange Laws ) are
exported to any foreign country or countries, an export license issued by the Japanese
Government will be required under the Foreign Exchange Laws.
Further, there may be cases where an export license issued by the government of the United
States or other country will be required under the applicable export-related laws and
ordinances in such relevant countries.
The contract shall become effective subject to that a relevant export license is obtained from
the Japanese Government.